Professional Documents
Culture Documents
/ Hardware connection
: 123 / Please connection, as follows: 1,2,3. LED: ON, the system is normal. Indicator: Flashing, LAN / WAN network cable is connected Reset: press the Reset button for 5 seconds, LED flashes 3 times release, the device will return to factory state.
Warning: 1. thunderstorm and all your device to connect the power cable removed, to avoid the lightning; 2. away from heat, ventilation; 3. storage, transportation, operation, pay attention to water.
/Set computer
Before Settings, make sure your computer / phone / tablet PC has a wireless network card Window 7 ---
INTELNET/Network and INTELNET- /Network and Sharing Center- /Change adapter- /right button /click the wireless network
(TCP/IPv4) click
Click the wireless icon in the pop network list, select the wireless network to connect, click the Connect button. When the screen displays "Connected" is a success.
4
1.
3G network card into the USB port of the router, and then start setting: Open browser and enter 192.168.1.1 / enter user nameadmin / password: admin then Click
2.
3. 4.
(Manually set the dial-up number, APN, user name and password)
then Click
(Repeat symbol)
----------------------------------------------------------------------------/Wireless Status: / Open SSID TP-LINK_3F8E90you can set a name as the network name) / Channel/Automatic /Mode: 11bgn mixed / Band Broadband :/ Automatic / Wireless security options : WPAPSK/WPA2-PSK AES (To ensure network security, it is strongly recommended to open wireless security and use WPA-PSK/WPA2-PSK AES encryption.)
(8-63 ACS code characters) Recommended to set the password, such as: a1b2c3d4 o / Does not modify the wireless security settings then Click Click Rebooting the router settings to take effect!
reconnect to the router" set, complete set, you can try to access the internet.)
First:
Please use network cable to connect router and computer
-----
-------------------------------------------------------------------------------
AP AP mode
-/Setup Wizard - Wireless mode
First:
Please use network cable to connect router and computer
---
O /Client
---------------------------------------------------------------------------------------
as: a1b2c3d4 then Click - Click Routers need to restart to take effect . --- After restarting, on your computer in accordance with the "
/Repeater
/Remote AP TP-LINK_325EA5 (SSID) (Click , AP in the pop-up list, select the front-end relay router, Click "") MAC /Address: E0-05-C5-32-5E-A5 /Wireless security options: /Key Type: WPA/WPA2-/ Personal Edition /Key Type: ()/Automatic (recommended) /Encryption Mode: ()/Automatic (recommended) /Password: . (Choose the type of front-end router's encryption, and enter the appropriate wireless password.) then Click --Click Routers need to restart to take effect . --- After restarting, on your computer in accordance with the "
/Bridge with AP
/ Wireless Network NameTP-LINK_3F8E90 SSID / Channel1 (Be set to the same channel front-end router) /Add Remote AP: (Click "", the AP in the pop-up list, select the router to bridge, Click "") AP1 MAC / Remote MAC address of AP1 E0-05-C5-32-5E-A5 Remote MAC address of AP2 . Remote MAC address of AP3 . Remote MAC address of AP4 . (To configure the bridge network, make sure that, near the access point using the same channel and encryption.) /Wireless security options: /Key Type: /Does not modify the wireless security settings then Click --Click Routers need to restart to take effect . --- After restarting, on your computer in accordance with the "
/Client
/ Wireless Network Name TP-LINK_325EA5 (SSID) (Click , AP in the pop-up list, select the front-end relay
router SSID, Click "") /Wireless security options: /Key Type: WPA/WPA2-/ Personal Edition /Key Type: ()/Automatic (recommended) /Encryption Mode: ()/Automatic (recommended) /Password: . (Set to connect to the router with the same encryption method and password.) then Click --Click Routers need to restart to take effect. --- After rebooting, the computer network connection IP address, DNS address, set to automatically obtain addresses.
Not