Australian Stitches

Applique Towel Topper

Requirements:

•  Brother Dream Machine
• 180mm x 130mm frame
• 1 x hand towel or tea towel
• 2 x soluble Vilene 25cm square
• 2 x white co›on drill 20cm square
• 1 x Solvy 15cm square
• 1 x Parlan (or Pellon) 20cm square
• 20cm white ribbon
• Assorted embroidery threads
• Bobbinfil
• Curved embroidery scissors
• Painter’s tape (masking tape)

Before we start:

Go to se›ngs page 8/9 and adjust the Embroidery Applique

You’re reading a preview, subscribe to read more.

More from Australian Stitches

Australian Stitches5 min read
Bias BY DESIGN
Also known as ‘cut on the cross’, cutting a garment on the bias refers to the grain at which the garment is cut. This is 45 degrees between the lengthwise and crosswise grains of the fabric. The lengthwise grain (warp threads) of the fabric runs para
Australian Stitches3 min read
Book Reviews
By Krista Fleckenstein Mixed Media goes graphic, minimal and sophisticated. Go beyond commercially available materials and get your hands dirty! Stitch up 19 designer projects while experimenting with ways to stamp, print, paint, dye, and embellish f
Australian Stitches4 min read
Cover-stitch Completion
The joy of cover-stitching can only be achieve by using good quality thread on both the needles and the lower looper and of course a set of new needles (*EL’s or **SUK’s), are definite a must! I’ve spent many an hour threading, re-threading and again

Related