You are on page 1of 2

Steelon Roofing System Sdn. Bhd.

-Integrated-Design, fabricate, supply and install

Page 1 of 2

Home About us Products Site-forming and Roofing Installation Work Roofing Work Current Project Contact Info RFQ/RFI

Products

Steelok | Stee - deck | Yodo Roof 66 | Fujiroof | Deck Plate SPD 51 | C Purlin | Z Purlin | Top Hat Purlin

PRODUCTS - DECK PLATE SDP - 51


DIMENSIONS & PROPERTIES
Section Propertise ( Per Metre Width ) Type Base Material Weight Covered Neutral Effective Second SDP -51 Thickness Area Axis Moment Of Area ( mm ) (kg/m2 ) ( mm ) 1 mm 4 Effective Effective Commpression Section Section Modulus Modulus Zc mm3 Tension SDP 51 - 08 0.8 8.59 18.63 332196 10392 18219 SDP 51 - 10 1.0 10.56 19.84 448229 14618 23178 SDP 51 - 12 1.2 12.54 20.87 570672 19324 28155 SDP 51 - 15 1.5 15.50 22.14 761702 27101 35603 Note : The effective section properties are drived base on effection breath of compression flange as started in Clause 16 BS5950 : Part 4 ( Code Of Practice For Design Of Floor With Profile Steel Sheeting ). Ultimate Moment Resistance KNM 4.35 6.12 8.09 11.34

For Load Table : BS5950 : 1994 Part 4 Code of practice for design of composite slabs with profile steel sheet. BS8110 : 1985 Part 1 Structural use of concrete - Code of pratice for design and construction. STANDARD MATERIAL & PROFILE SPECIFICATIONS

The STEELON Deck Plate SDP-51, is a purpose designed trapezoidal composite flooring profile and is the most advance composite decking in the region, It incorporates the specific floor decking required by designers, developers, engineers and builders resulting in a revolutionary geometrical profile dimensions.

Material Specification Material Zinc Coating Base Steel Thickness Cover Width Yeild Strength Rib Height Tolerance Length Cover Width Thickness

: Hot - Dipped Galvanised Steel Sheet : 275 g/m2 : 0.80mm, 1.00mm : 1.20mm & 1.50mm : 970 mm 550 Mpa : 51 mm 10 mm 5 mm 0.02 mm

STORAGE AND HANDLING

STEELON Deck Plate SDP-51 should be kept dry during storage before use. They should be stacked clear of the ground with timber sleepers and covered to prevent bundles from water penetration. if bundles become wet during transportation or storage, the deck plates must be separated and wiped dry with clean cloth as quickly as possible. When lifting the deck plates during loading and unloading or when lifting onto the floor frame structure, care must be taken to prevent the bundles or loose pieces from dropping to the ground or banging against the building.
SECTIONAL DETAIL

http://www.cocolulu.cc/steelon/product_deck_plate_sdp51.htm

31/7/2012

Steelon Roofing System Sdn. Bhd.-Integrated-Design, fabricate, supply and install

Page 2 of 2

BEAM JOINT DETAIL

AROUND COLUMN DETAIL

Products

Steelok | Stee - deck | Yodo Roof 66 | Fujiroof | Deck Plate SPD 51 | C Purlin | Z Purlin | Top Hat Purlin

Home | About Us | Site-Formaing and Roofing Installation Work Roofing | Current Project | Contact Us | Enquiry Steelon Roofing Systems Sdn Bhd (132039-D) email : steelon@streamyx.com website : www.steelon.cc Copyright 2002 All rights Reserved

http://www.cocolulu.cc/steelon/product_deck_plate_sdp51.htm

31/7/2012

You might also like