Professional Documents
Culture Documents
www.apollo-fire.co.uk
Trustworthy, integrity & supportive Localised customer service worldwide Ex stock delivery 100% reliability, 100% tested Open, digital protocol Forwards and backwards product compatibility World Class Fire Solutions World
Apollo Fire Detectors Ltd. has specialised in the design and manufacture of high quality fire detection products since 1980. In that time, the company has broadened its capability from a straightforward focus on conventional fire detectors to include the manufacture of sophisticated analogue addressable detectors and interfaces for monitoring and controlling equipment in fire protection systems. Apollo applies the most modern production techniques and has invested in sophisticated manufacturing equipment to ensure consistent high quality products and fast response to customer requirements. Through planned expansion, Apollo has reached a leading position in the market for professional fire detectors and exports over half of its production to countries around the world. In 2007, Apollo unveiled a new brand identity, further cementing its position as a world class fire solutions provider. Based in Havant, Hampshire, Apollo operates from one site. All departments - Research and Development, Sales and Marketing, Manufacturing and Finance are located here. Apollo is a Halma company. Halma is a holding company for over 40 subsidiaries worldwide, all engaged in specialist engineering activities.
Information in this catalogue is given in good faith, but Apollo Fire Detectors cannot be held responsible for any omissions or errors. The company reserves the right to change specifications of products at any time without prior notice.
Contents
4 6 8 24 34 40 44 52 68
Intrinsically Safe
XP95, Orbis
Two-wire technology
AlarmSense
UL
XP95A, Series 65A, Discovery UL
Wireless technology
XPander
Specialist Detectors
Flame, Beam & Duct Detectors
Additional Services
Loop Calculator, Training
Approvals
Interfaces
Isolated, Non-Isolated, Mini, DIN-Rail
Index
Integrating ionisation smoke detector This type of detector works on the same principles as the ionisation smoke detector, but has modified signal processing circuitry which allows an alarm threshold to be present for up to 20 seconds without initiating an alarm. This type of detector is suitable for use in areas where transient high levels of smoke may be expected. Integrating effect in analogue addressable systems In XP95 systems, the integrating effect can be mimicked in both ionisation and optical smoke detectors by adjusting the control equipment software to cause an appropriate delay. Discovery smoke detectors should be set to Mode Two or Mode Four to achieve this effect.
Ionisation smoke detector The sensing part of the detector consists of two chambers - an open, outer chamber and a semi-sealed reference chamber within. Mounted in the reference chamber is a low activity radioactive foil of Americium 241 which enables current to flow between the inner and outer chambers when the detector is powered up. As smoke enters the detector, particles become attached to the ions, causing a reduction in current flow in the outer chamber and hence an increase in voltage measured at the junction between the two chambers. The voltage increase is monitored by the electronic circuitry which triggers the detector into the alarm state at a preset threshold. An externally visible red LED lights up when the detector changes to alarm state. Ionisation smoke detectors are good general-purpose detectors which respond well to fast-burning (flaming) fires and are widely used for property protection.
Optical (photo-electric) smoke detector Optical smoke detectors incorporate a pulsing infra-red LED located in a chamber within the housing of the detector. The chamber is designed to exclude light from any external source. At an angle to the LED is a photodiode which normally does not register the column of light emitted by the LED. In the event of smoke from a fire entering the chamber, the light pulse from the LED will be scattered and hence registered by the photodiode. If the photo-diode sees smoke on the two following pulses, the detector changes into alarm state and the indicator LED lights up. The detector housing is identical to that of the ionisation detector but has an indicator LED which is clear in quiescent state but produces red light in alarm. Optical smoke detectors respond particularly well to slow-burning (smouldering) fires. They are widely used for life protection.
Heat detector Most conventional heat detectors operate by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two thermistors register similar temperatures, but, on the development of a fire, the temperature recorded by the exposed thermistor will increase rapidly, resulting in an imbalance of the thermistors, causing the detector to change into alarm state. Rate-of-rise detectors are designed to detect a fire as the temperature increases, but they also have a fixed upper limit at which the detector will go into alarm if the rate of temperature increase has been too slow to trigger the detector earlier. The Series 65 and AlarmSense CS (static response) heat detectors have only one thermistor. They change to the alarm state at a preset temperature. Externally, the heat detectors are distinguishable from the smoke detectors by having wide openings to the surrounding atmosphere to allow good movement of air around the external thermistor. A heat detector may be more appropriate than a smoke detector where the environment is dirty or smoky under normal conditions. It must be recognised, however, that any heat detector will respond only when a fire is well established and generating a high heat output. Multisensor detector A multisensor detector is basically an optical smoke detector - so it will respond well to smouldering fires. The addition of a heat sensing element allows the multisensor to give a response to fast burning (flaming) fires which is comparable to that of an ionisation detector. Multisensor detectors are general purpose detectors which respond well to a wide range of fires.
Carbon Monoxide (CO) detector Carbon Monoxide (CO) is a poisonous gas produced by combustion and a CO fire detector is used to indicate the outbreak of a fire by sensing the level of CO in the air. The detector has an electrochemical cell which senses CO, but not smoke or other combustion products. The cells do not require much power, so the detector can be made electrically compatible with ordinary smoke and heat detectors. Apollo manufacturers a CO detector as part of the Discovery range. CO detectors are particularly good at detecting deepseated, smouldering fires. Beam detector A beam detector is made up of three main parts: the transmitter, which projects a beam of infra-red light; the receiver which registers the light and produces an electrical signal; and the interface, which processes the signal and generates alarm or fault signals. When a fire develops, smoke particles obstruct the beam of light and, once a pre-set threshold has been exceeded, the detector will go into alarm. Beam detectors are designed to protect large open spaces such as atria, museums, churches and warehouses. Flame detector A flame detector is designed to detect either ultraviolet (UV) or infra-red (IR) radiation emitted by a fire. The XP95 Dual IR flame detector is sensitive to low-frequency, flickering infra-red radiation. This means that the detector can operate even if the lens is contaminated by a layer of oil, dust, water vapour or ice. Flame detectors are effective in protecting areas where flaming fires may be expected.
New Products
New Products
Apollo prides itself on being a leader in product innovation. Providing fire solutions that meet the demands of our customers is the main pillar of Apollos product development programme. We are constantly working with our customers to develop new products to meet their needs. A further commitment to Apollos customer focus has seen the Marketing team be strengthened by the introduction of three new product management roles. These dedicated personnel will be responsible for the future direction of the portfolio as well as the internal management of the ranges. A prime responsibility of the new roles is continuation of customer focused product development within Apollo and continuing to be the Partner of Choice. If you have any comments or suggestions on any new or existing products, feel free to email ideas@apollo-fire.co.uk
New Products
DIN-Rail Sounder Controller (5 Amperes) The DIN-Rail Sounder Controller (5 Amperes) is used to control the operation of a zone of externally powered sounders and report their status to the control panel.
Locally Powered Zone Monitor DIN-Rail Zone Monitor for IS Heads 110dB(A) Open-Area Sounder Beacon Marine 110dB(A) Open-Area Sounder Beacon Discovery CO/Heat Detector Sounder Controller 8 Amperes (Marine) Conventional Flush Mounted Smoke Detector Marine DIN-Rail Mains Input/Output Unit
Deckhead Mounting Box The Deckhead Mounting Box gives extra protection to devices to be fitted in areas where there is the possibility of moisture or condensation ingressing through the rear of the of the base. This new version is suitable for a wider range of detector bases as well as Apollos AV bases.
Marine Base Mounted Flame Detectors Discovery Open-Area Sounder Beacon UL approved Open-Area Sounder UL approved Releasing Control Module UL approved Mini Monitor Module
8 10
In an Intelligent system all devices have unique addresses and are connected in loops to the control panel. Intelligent systems give advanced warning of a developing hazard and can pinpoint the individual device raising alarm. There are two types of intelligent system those with distributed intelligence and those with centralised intelligence. In systems with distributed intelligence the detectors incorporate processors which can determine whether alarm levels of smoke or heat exist and can initiate action accordingly. Detectors in systems with centralised intelligence monitor the air around them for smoke or heat and transmit the data to the control panel on interrogation. The processor in the panel compares the values with stored values and determines whether a pre-alarm or alarm should be signalled. The advantages of distributed intelligence are local adaptation to environment and reduction of traffic on the supply and data wires. The advantage of centralised intelligence is the ability to upgrade a system very quickly and easily by upgrading the control panel.
Discovery is a range of high-specification, intelligent fire detectors developed to meet the requirements of sophisticated systems while providing engineers with an additional dimension in fire protection capability. Discovery has a distributed intelligence system where decisions are made in the detector head as well as at the control panel. Drift compensation is also incorporated into the detector, allowing it to adapt to dirty or dusty environments, which reduces false alarms.
Each detector in the Discovery range can operate in one of five response modes, which can be selected from the control panel or hand held programmer. The response characteristics have been carefully set so that the detectors comply with the requirements of the relevant part of EN54 in all response modes. Mode One will give a higher sensitivity to fire than Mode Five. Discovery gives you total reassurance in installations where adaptability to changing conditions and protection against unwanted alarms is paramount. Key features of Discovery include: Rejection of transient signals Flashing LED option Five response modes for ease of optimisation to changing environments Drift compensation to ensure constant sensitivity Four bytes of non-volatile memory for user data Alarm flag for fast alarm reporting Conventional alarm facility during control panel processor fault 360 visibility in alarm Compatible with XP95 systems Insect Resistant
Discovery
10
Please check the Apollo website on a regular basis for up-to-date approvals information.
11
Isolating Base
The new style Isolating Base senses and detects short-circuit faults on Discovery loops and spurs.
Isolating Base 45681-284 The equivalent of up to 20 smoke detectors may be installed between isolating bases High brightness LED Compatible with Discovery CO detector
Isolator
The Isolator is placed at intervals on the loop and ensures that, in the case of a short-circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section.
Isolator 55000-720 Detects wiring short circuits using patented technology Minimises disruption from short-circuits Automatic de-isolation on short-circuit removal The equivalent of up to 20 smoke detectors may be installed between isolators
Please check the Apollo website on a regular basis for up-to-date approvals information.
12
Isolator Base
The Isolator Base is unique and designed to only accept the Isolator 55000-720.
Isolator Base 45681-211 Only accepts isolators
Please check the Apollo website on a regular basis for up-to-date approvals information.
13
MOUNTING ACCESSORIES Backplate Base Cover Conduit Box Sounder Ceiling Plate Module Base Deckhead Mounting Box Metal Deckhead Mounting Box PG16 Metal Deckhead Mounting Box M20 Deckhead Adaptor PG16-M20 Detector Ceiling Tile Mounting Box Sounder Ceiling Tile Mounting Box Beacon Enclosure DIN-Rail Interface Enclosure (4 units) DIN-Rail Interface Enclosure (10 units) 1.5mm Hexagonal Driver MANUAL CALL POINTS Discovery Manual Call Point Red (Surface) Discovery Manual Call Point with Isolator Red (Surface) Discovery Manual Call Point White Discovery Manual Call Point Yellow Discovery Manual Call Point Blue Discovery Manual Call Point Green Transparent Hinged Cover Weatherproof Manual Call Point Red Weatherproof Manual Call Point Red with Isolator STANDARD INTERFACES Input/Output Unit Three Channel Input/Output Unit Three Channel Input/Output Unit PCB only Output Unit Sounder Control Unit Switch Monitor Switch Monitor Plus Zone Monitor MINI INTERFACES Mini Switch Monitor Mini Switch Monitor with fly leads Mini Switch Monitor with fly leads (Interrupt) DIN-RAIL INTERFACES NEW!! DIN-Rail Sounder Controller (5 Amperes) DIN-Rail Input/Output Unit DIN-Rail Output Unit DIN-Rail Switch Monitor DIN-Rail Switch Monitor Plus DIN-Rail Zone Monitor with Isolator DIN-Rail Dual Isolator 55000-182 55000-803 55000-804 55000-822 55000-821 55000-812 55000-802 55000-760 55000-833 55000-832 55000-847 55000-588 43781-588 55000-849 55000-852 55000-843 55000-841 55000-845 58100-910 58100-908 58100-926 58100-927 58100-928 58100-929 26729-152 58100-950 58100-951 45681-233 45681-380 45681-204 45681-311 38531-822 45681-217 29600-131 29600-139 27249-005 45681-309 45681-310 29600-318 29600-239 29600-240 29600-095
82 83 83 83 83 83 84 84 84 84 84 84 84 85 85 85 78 79 79 79 79 79 79 79 80 80 69 70 70 70 70 70 71 71 71 73 74 74 74 75 76 76 76 76 77 77 77
14
Product Name
Part Number
Page No.
AUDIO VISUAL SIGNALLING Discovery Sounder Beacon Base Intelligent Open-Area Sounder Red Intelligent Open-Area Sounder White Intelligent 100dB (A) Open-Area Sounder Red Intelligent 100dB (A) Open-Area Sounder White Intelligent 100dB (A) Open-Area Sounder Slow Whoop Red Intelligent 100dB (A) Open-Area Sounder Slow Whoop White Intelligent 100dB (A) Open-Area Weatherproof Sounder Red Intelligent 100dB (A) Open-Area Weatherproof Sounder White Integrated Base Sounder Integrated Base Sounder with Isolator Integrated Base Sounder Slow Whoop Integrated Base Sounder Slow Whoop with Isolator Integrated Base Sounder DIN-Tone with Isolator White Cap Red Cap Intelligent Base Sounder Intelligent Base Sounder, for use with Isolating Base Intelligent Base Sounder Slow Whoop Intelligent Base Sounder Slow Whoop for use with Isolating Base White Cap Red Cap Ancillary Base Sounder Intelligent Open-Area Beacon Red Lens Intelligent Open-Area Beacon Clear Lens Loop-Powered Beacon Red Loop-Powered Beacon Amber Loop-Powered Beacon Clear Lens/Red Flash Beacon Enclosure Loop-Powered Beacon Base with Isolator Loop-Powered Beacon Base with Standard Flash Loop-Powered Beacon Base with Australian Flash Intelligent Open-Area Sounder Beacon Red Lens Intelligent Open-Area Sounder Beacon Clear Lens Multi-Tone Open-Area Sounder Beacon Red with Isolator Multi-Tone Open-Area Sounder Beacon White with Isolator Multi-Tone Open-Area Sounder Beacon Red Multi-Tone Open-Area Sounder Beacon White Weatherproof Multi-Tone Open-Area Sounder Beacon Red with Isolator Weatherproof Multi-Tone Open-Area Sounder Beacon Red Weatherproof Multi-Tone Open-Area Sounder Beacon White Sounder Beacon Base with Isolator Sounder Beacon Base Sounder Beacon Base with Australian Tone Sounder Beacon Base with Isolator DIN-Tone Sounder Beacon Base with NZ Tone Sounder Beacon Base Slow Whoop with Isolator Magnetic Wand 45681-393 55000-001 55000-002 55000-278 55000-279 55000-276 55000-277 55000-274 55000-275 45681-278 45681-277 45681-291 45681-290 45681-300 45681-292 45681-293 45681-265 45681-266 45681-267 45681-268 29600-256 29600-257 45681-276 55000-009 55000-010 55000-877 55000-879 55000-878 29600-318 45681-333 45681-335 45681-337 55000-005 55000-006 55000-293 55000-294 55000-291 55000-292 55000-298 55000-296 55000-297 45681-330 45681-331 45681-336 45681-334 45681-338 45681-332 29650-001 65 54 54 54 54 54 54 54 54 56 56 56 56 56 56 56 56 56 56 56 56 56 56 59 59 59 59 59 59 61 61 61 63 63 63 63 63 63 63 63 63 63 65 65 65 65 65 65 67
15
16
The XP95 range of intelligent fire detectors is advanced in design, improved in performance and has unique features that benefit the installer and end user.
XP95
The range features smoke detectors (ionisation and optical), standard and high temperature heat detectors and a multisensor. Beam detectors, flame detectors, manual call points, audio visual signalling devices, interface units and isolators complete the range. XP95 has a central intelligence system where all the decisions are made by the control panel. Apollo has always used an open, digital protocol since 1986 and has ensured backward compatibility when developing new products. An open protocol allows freedom of choice for the fire system specifier, installer and end user. A system using a digital protocol is also much less susceptible to corruption than an analogue protocol and is therefore often preferred in a system which is life critical.
Key features of XP95 include: Alarm Flag for fast alarm reporting Alarm Address for fast location of alarm XPERT card addressing Electronics-free base Easy installation Elegant design Insect Resistant
17
Please check the Apollo website on a regular basis for up-to-date approvals information.
18
Isolating Base
The new style Isolating Base senses and detects short-circuit faults on XP95 loops and spurs.
Isolating Base 45681-284 The equivalent of up to 20 smoke detectors may be installed between isolating bases High brightness LED
Isolator
The Isolator is placed at intervals on the loop and ensures that, in the case of a short-circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section.
Isolator 55000-720 Detects wiring short circuits using patented technology Minimises disruption from short-circuits Automatic de-isolation on short-circuit removal The equivalent of up to 20 smoke detectors may be installed between isolators
Isolator Base
The Isolator Base is unique and designed to only accept the Isolator 55000-720.
Isolator Base 45681-211 Only accepts isolators
Please check the Apollo website on a regular basis for up-to-date approvals information.
19
Please check the Apollo website on a regular basis for up-to-date approvals information.
20
MOUNTING ACCESSORIES Backplate Base Cover Conduit Box Sounder Ceiling Plate Module Base NEW!! Deckhead Mounting Box Metal Deckhead Mounting Box PG16 Metal Deckhead Mounting Box M20 Deckhead Adaptor PG16-M20 Detector Ceiling Tile Mounting Box Sounder Ceiling Tile Mounting Box Beacon Enclosure DIN-Rail Interface Enclosure (4 units) DIN-Rail Interface Enclosure (10 units) Series 90 to XP95 Base Adaptor 1.5mm Hexagonal Driver MANUAL CALL POINTS XP95 Manual Call Point Red (Surface) XP95 Manual Call Point with Isolator Red (Surface) Transparent Hinged Cover STANDARD INTERFACES Input/Output Unit Three Channel Input/Output Unit Three Channel Input/Output Unit PCB only Output Unit Sounder Control Unit Switch Monitor Switch Monitor Plus Zone Monitor MINI INTERFACES Mini Switch Monitor Mini Switch Monitor with fly leads Mini Switch Monitor with fly leads (Interrupt) DIN-RAIL INTERFACES NEW!! DIN-Rail Mains Input/Output Unit NEW!! DIN-Rail Sounder Controller (5 Amperes) DIN-Rail Input/Output Unit DIN-Rail Output Unit DIN-Rail Switch Monitor DIN-Rail Switch Monitor Plus DIN-Rail Zone Monitor with Isolator DIN-Rail Dual Isolator AUDIO VISUAL SIGNALLING Intelligent Open-Area Sounder Red Intelligent Open-Area Sounder White Intelligent 100dB (A) Open-Area Sounder Red Intelligent 100dB (A) Open-Area Sounder White Intelligent 100dB (A) Open-Area Sounder Slow Whoop Red 55000-001 55000-002 55000-278 55000-279 55000-276 55000-797 55000-182 55000-803 55000-804 55000-822 55000-821 55000-812 55000-802 55000-760 55000-833 55000-832 55000-847 55000-588 43781-588 55000-849 55000-852 55000-843 55000-841 55000-845 55100-905 55100-908 26729-152 45681-233 45681-380 45681-204 45681-311 38531-822 45681-217 29600-131 29600-139 27249-005 45681-309 45681-310 29600-318 29600-239 29600-240 45681-238 29600-095
82 85 83 83 83 83 84 84 84 84 84 84 84 85 85 85 85 78 79 79 79 69 70 70 70 70 70 71 71 71 73 74 74 74 75 76 76 76 76 76 77 77 77 52 54 54 54 54 54
21
Product Name
Part Number
Page No.
Intelligent 100dB (A) Open-Area Sounder Slow Whoop White Intelligent 100dB (A) Open-Area Weatherproof Sounder Red Intelligent 100dB (A) Open-Area Weatherproof Sounder White Integrated Base Sounder Integrated Base Sounder with Isolator Integrated Base Sounder Slow Whoop Integrated Base Sounder Slow Whoop with Isolator Integrated Base Sounder DIN-Tone with Isolator White Cap Red Cap Intelligent Base Sounder Intelligent Base Sounder, for use with Isolating Base Intelligent Base Sounder Slow Whoop Intelligent Base Sounder Slow Whoop for use with Isolating Base White Cap Red Cap Ancillary Base Sounder Intelligent Open-Area Beacon Red Lens Intelligent Open-Area Beacon Clear Lens Loop-Powered Beacon Red Loop-Powered Beacon Amber Loop-Powered Beacon Clear Lens/Red Flash Beacon Enclosure Loop-Powered Beacon Base with Isolator Loop-Powered Beacon Base with Standard Flash Loop-Powered Beacon Base with Australian Flash Intelligent Open-Area Sounder Beacon Red Lens Intelligent Open-Area Sounder Beacon Clear Lens Multi-Tone Open-Area Sounder Beacon Red with Isolator Multi-Tone Open-Area Sounder Beacon White with Isolator Multi-Tone Open-Area Sounder Beacon Red Multi-Tone Open-Area Sounder Beacon White Weatherproof Multi-Tone Open-Area Sounder Beacon Red with Isolator Weatherproof Multi-Tone Open-Area Sounder Beacon Red Weatherproof Multi-Tone Open-Area Sounder Beacon White Sounder Beacon Base with Isolator Sounder Beacon Base Sounder Beacon Base with Australian Tone Sounder Beacon Base with Isolator DIN-Tone Sounder Beacon Base with NZ Tone Sounder Beacon Base Slow Whoop with Isolator
55000-277 55000-274 55000-275 45681-278 45681-277 45681-291 45681-290 45681-300 45681-292 45681-293 45681-265 45681-266 45681-267 45681-268 29600-256 29600-257 45681-276 55000-009 55000-010 55000-877 55000-879 55000-878 29600-318 45681-333 45681-335 45681-337 55000-005 55000-006 55000-293 55000-294 55000-291 55000-292 55000-298 55000-296 55000-297 45681-330 45681-331 45681-336 45681-334 45681-338 45681-332
54 54 54 56 56 56 56 56 56 56 56 56 56 56 56 56 56 59 59 59 59 59 59 61 61 61 63 63 63 63 63 63 63 63 63 63 65 65 65 65 65 65
22
Apollos Intelligent ranges use patented XPERT cards. A unique XPERT card provides simple, user friendly and accurate identification of detector location where a coded card, inserted into the base, is read
XPERT cards
by any detector once plugged in. All the electronic components are in the detector but the location information is held in the base which saves time and increases accuracy during commissioning.
23
XPander Blank XPERT Card (White) XPander Blank XPERT Card (Red)
29600-413 29600-399
XPander XPERT cards are not interchangeable with those used with XP95 and Discovery.
Please check the Apollo website on a regular basis for up-to-date approvals information.
24 10
In conventional systems detectors are wired as a circuit or zone. They signal fire conditions to a control panel by changing from a high to low impedance. The panel detects this impedance change by current monitoring and identifies the zone. Individual detectors cannot be identified.
25 11
Orbis is a range of conventional detectors which has been developed with sophisticated technology previously only found in intelligent detectors. Orbis is a range with modern styling and incorporates a mounting base which saves installation time.
Key features of Orbis: Automatic drift compensation with DirtAlert warning Patented FasTest which reduces the time taken to test detectors ensAlert uses a flashing LED to indicate that the S sensor is not operating correctly StartUp for fast commissioning Attractive and compact design Electrically compatible with Series 60 and Series 65 Wide voltage and operating temperature ranges Algorithms for transient rejection Flashing LED option 360 visibility of LEDs nsect Resistant I
Orbis
26 10
ORB-HT-11001-APO ORB-HT-11013-APO ORB-HT-11166-APO ORB-HT-11167-APO ORB-HT-11002-APO ORB-HT-11014-APO ORB-HT-11003-APO ORB-HT-11015-APO ORB-HT-11004-APO ORB-HT-11016-APO ORB-HT-11005-APO ORB-HT-11017-APO ORB-HT-11006-APO ORB-HT-11018-APO Choosing a heat detector
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval
27 11
Orbis LX Base
The Orbis LX Base is a low cost mounting base for use with Orbis detectors.
Orbis LX Base ORB-MB-00012-APO Low cost option
TimeSaver Base
The TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
TimeSaver Base TimeSaver Base LX (simplified) version ORB-MB-00001-APO ORB-MB-00002-APO Grouped terminals to make wiring easy Two fixing centres LED alignment mark Cable stripping guide Detector locking mechanism
Please check the Apollo website on a regular basis for up-to-date approvals information.
28 10
Sav-Wire Base
The Sav-Wire Base is designed to allow Orbis detectors to be used in Sav-Wire detection and alarm systems.
Sav-Wire Base ORB-SW-10005-APO Grouped terminals to make wiring easy Two fixing centres LED alignment mark Cable stripping guide Detector locking mechanism Can be used in Sav-Wire systems
MOUNTING ACCESSORIES Backplate Conduit Box Sounder Ceiling Plate Polycarbonate Deckhead Mounting Box Metal Deckhead Mounting Box PG16 Metal Deckhead Mounting Box M20 Deckhead Adaptor PG16-M20 Detector Ceiling Tile Mounting Box Sounder Ceiling Tile Mounting Box 1.5mm Hexagonal Driver Series 65 to Orbis Base Adaptor 45681-233 45681-204 45681-311 45681-217 29600-131 29600-139 27249-005 45681-309 45681-310 29600-095 ORB-BA-10008-APO
82 85 83 83 84 84 84 84 84 84 85 85
Please check the Apollo website on a regular basis for up-to-date approvals information.
29 11
Series 65 incorporates well-proven sensing technologies together with advances in materials and electronics. Developed from the highly successful Series 60 range of detectors, Series 65 includes a chip (integrated circuit) based on that used in XP95 analogue addressable detectors.
Having a wide operating voltage of 9-33V, the Series 65 detectors can be integrated into security systems, when used with a relay base. The range consists of ionisation, integrating ionisation and optical smoke detectors, four grades of heat detector and a range of bases.
Series 65
conventional fire detection
Each type of detector is available in three versions: Standard Flashing LED Flashing LED and magnet operated test switch Key features of Series 65: Wide operating voltage Advanced electronic technology Flashing LED option Magnetic test switch option Can be used on security systems Electrically and mechanically compatible with Series 60 Proven detection performance
30 10
Responds well to fast burning, flaming fires Designed to operate in environments where transient levels of smoke may be expected Wide operating voltage Flashing LED and magnet operated test switch option
Series 65 Integrating Ionisation 55000-219 Smoke Detector with flashing LED Series 65 Integrating Ionisation Smoke Detector with flashing LED and magnetic test switch 55000-218
Series 65 Optical Smoke Detector with 55000-315 flashing LED and magnetic test switch Series 65 Optical Smoke Detector (French)* 55000-308
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval * Does not have LPCB or VdS approval
31 11
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval
32 10
Please check the Apollo website on a regular basis for up-to-date approvals information.
33 11
MOUNTING ACCESSORIES Backplate Series 65 Base Cover Conduit Box Module Base Metal Deckhead Mounting Box PG16 Metal Deckhead Mounting Box M20 Deckhead Adaptor PG16-M20 Detector Ceiling Tile Mounting Box 1.5mm Hexagonal Driver AUDIO VISUAL SIGNALLING Series 65 Sounder Base Series 65 Sounder Base with diode 45681-512 45681-513 45681-233 45681-370 45681-204 38531-822 29600-131 29600-139 27249-005 45681-309 29600-095
82 85 83 83 83 84 84 84 84 85 52 57 57
Please check the Apollo website on a regular basis for up-to-date approvals information.
34 10
Two-Wire Technology
Two-Wire Technology
In conventional systems, detectors are hard wired into a circuit or zone. They signal a fire condition to a control panel by changing from a high to low impedance. The panel detects this impedance change by current monitoring and identifies the zone. Individual detectors cannot be identified. In two-wire conventional systems, fire detection and alarm products are connected to the same pair of supply wires, making installation quicker, less expensive and more flexible than traditional fourwire systems. Two-wire systems are particularly well suited for small to medium sized buildings.
Two-Wire Technology
ALARMSENSE
35 11
AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium sized buildings. The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs.
The AlarmSense range incorporates a number of technologically advanced features such as patented RemovAlert which alerts the control panel if a detector has been removed without authorisation. The entire AlarmSense range has been designed to enable compliance with BS5839-1 and BS5839-6 in addition to EN54 standards. AlarmSense is also compliant with the Construction Products Directive (CPD).
AlarmSense
two-wire technology
Key features of AlarmSense include: Patented RemovAlert head removal monitoring Local and general alarm switching Reduced wiring costs Quick and simple installation False alarm reduction with non-priority signalling Flexible system design Failsafe operation of manual call points Detectors and call point alarms identifiable separately
36 10
Two-Wire Technology
ALARMSENSE
AlarmSense Base
AlarmSense detectors can only be mounted into the AlarmSense Base. The base is used for installing detectors that do not require an integral sounder or sounder beacon.
AlarmSense Base 45681-244 Detects the removal of a detector head and reports a fault Continues to work during unauthorised removal of detectors Quick and simple installation
Please check the Apollo website on a regular basis for up-to-date approvals information.
Two-Wire Technology
ALARMSENSE
37 11
Please check the Apollo website on a regular basis for up-to-date approvals information.
38 10
Two-Wire Technology
ALARMSENSE
MOUNTING ACCESSORIES Backplate Conduit Box Sounder Ceiling Plate Module Base Metal Deckhead Mounting Box PG16 Metal Deckhead Mounting Box M20 Deckhead Adaptor PG16 - M20 Detector Ceiling Tile Mounting Box Sounder Ceiling Tile Mounting Box 1.5mm Hexagonal Driver MANUAL CALL POINTS AlarmSense Manual Call Point (Surface) AlarmSense Manual Call Point (Flush) AUDIO VISUAL SIGNALLING AlarmSense Sounder Base LR AlarmSense Sounder Base AlarmSense Sounder Beacon Base LR AlarmSense Sounder Beacon Base White Cap Red Cap 45681-341 45681-510 45681-340 45681-509 45681-294 45681-295 55100-894 55100-893 45681-233 45681-204 45681-311 38531-822 29600-131 29600-139 27249-005 45681-309 45681-310 29600-095
82 83 83 83 83 84 84 84 84 84 85 78 80 80 52 57 57 65 65 65 65
Apollo makes ordering AlarmSense products for a project easy with a selection of detector/sounder base or detector/sounder beacon base packages. See pages 57 and 65 for a description of the AlarmSense Sounder Base and Sounder Beacon Base.
Sounder Base Combination Part Number
With Optical Smoke Detector With Integrating Optical Smoke Detector With A1R Heat Detector With CS Heat Detector Sounder Beacon Base Combination With Optical Smoke Detector With Integrating Optical Smoke Detector With A1R Heat Detector With CS Heat Detector
55000-392 55000-393 55000-196 55000-197 Part Number 55000-394 55000-395 55000-198 55000-199
Two-Wire Technology
ALARMSENSE
39 11
40 10
Wireless Technology
Wireless Technology
Traditionally, fire detection systems in industrial and commercial applications have used hard wired installations. These systems are generally installed at the time of construction or refurbishment, making the laying of cables less of an issue. Certain applications do not lend themselves to this approach, such as occupied buildings, heritage sites, palaces, annexes etc. - this is where wireless systems provide the ideal solution.
Wireless Technology
XPANDER
41 11
XPander is a system in which individual detectors, call points and alarm devices communicate with the XP95 loop by radio signals. An interface is connected to the loop in the same way as any other interface, such as an input/output unit.
Every XPander device is assigned an address and this address is recognised by the control panel in the same way as the address of any other device connected directly to the loop wiring. The XPander range benefits from the patented XPERT technology that is also used in Discovery and XP95. See page 23 for more details. XPander can be incorporated into fire detection systems in stately homes and architecturally sensitive buildings where the use of fire cables is either impractical or undesirable. Key features of XPander include: Easy to install XPERT card addressing Self-monitoring Proven technology No special control panel needed 868MHz radio channels Up to 15 devices per interface Up to 5 interfaces per loop All detectors within the XPander range are sold with mounting bases. Please ensure that you have attended an approved XPander training course prior to purchasing products from the XPander range. A site survey tool must be included in the first order of XPander products as a site survey must be carried out prior to installation.
XPander
wireless technology
42 10
Wireless Technology
XPANDER
Please check the Apollo website on a regular basis for up-to-date approvals information.
Wireless Technology
XPANDER
43 11
XPander Manual Call Point XPander Sounder and Sounder Base Red XPander Sounder and Sounder Base White XPander Red Sounder Beacon and Red Sounder Base XPander Amber Sounder Beacon and White Sounder Base XPander Clear Sounder Beacon and White Sounder Base XPander Blank XPERT Card (White) XPander Blank XPERT Card (Red)
80 54 54 63 63 63
XPander XPERT cards are not interchangeable with those used with Discovery and XP95.
Please check the Apollo website on a regular basis for up-to-date approvals information.
44
Specialist Detectors
Specialist Detectors
I n addition to standard detectors, Apollo offer a range of specialist detectors suitable for a wide variety of applications.
Specialist Detectors
FLAME DETECTORS
45
Flame detectors are effective in protecting areas where flaming fires may be expected. There is a choice of detection techniques - Ultra Violet and Infra-red, or a combination of both. UV Flame Detectors are generally used in engine rooms, factories and warehouse applications. Infra-red Flame Detectors are able to tolerate dirtier environments which may block UV radiation and are generally used in applications such as waste handling, colour printing and paper manufacturing.
Flame Detectors
specialist detectors
46
Specialist Detectors
FLAME DETECTORS
Please check the Apollo website on a regular basis for up-to-date approvals information.
Specialist Detectors
FLAME DETECTORS
47
Ancillary products:
Product Name Part Number Page No.
29600-226
117
Please check the Apollo website on a regular basis for up-to-date approvals information.
48
Specialist Detectors
BEAM DETECTORS
Beam detectors are designed to protect large open spaces such as atria, museums, churches and warehouses.
Beam Detectors
specialist detectors
Specialist Detectors
BEAM DETECTORS
49
Firebeam
Firebeam is a reflective beam smoke detector which is designed to protect large open spaces. It incorporates a motorised head that can align itself during commissioning.
Firebeam Reflective Beam Detector 5-40m Firebeam Extension Kit 40-80m Firebeam Extension Kit 80-100m Firebeam Adaptor Plate 29600-350 29600-351 29600-352 29600-353 Continually corrects itself against building movement Controlled and adjusted from ground level
Please check the Apollo website on a regular basis for up-to-date approvals information. Firebeam is a registered trade mark of The Fire Beam Company
50
Specialist Detectors
DUCT DETECTORS
Duct Detectors
specialist detectors
Specialist Detectors
DUCT DETECTORS
51
Extension Tubes
Product Name Part Number
Please check the Apollo website on a regular basis for up-to-date approvals information.
52 10
Apollo offer a wide range of Audio Visual (AV) signalling devices sounders, beacons, sounder beacons and sounder beacon bases for use in conjunction with their range of conventional and intelligent detectors to meet the requirements of the DDA.
53
Sounders
54
Please check the Apollo website on a regular basis for up-to-date approvals information.
55
Base Sounders
56
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval * Does not have CPD or VdS approval
57
Please check the Apollo website on a regular basis for up-to-date approvals information.
58
Beacons
59
Loop-Powered Beacon
The Loop-Powered Beacon is a local-area beacon designed for indoor use. The beacon has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.
Loop-Powered Beacon Red Loop Powered Beacon Amber Loop Powered Beacon Clear Lens/Red Flash 55000-877 55000-879 55000-878 High intensity LEDs More reliable than xenon beacons Automatic LED check Lockable Wide angle of visibility Enables DDA compliance Synchronised flash Can be used with Discovery or XP95
Beacon Enclosure
The Beacon Enclosure is weatherproof and allows Apollos loop-powered beacon to be used in highmoisture environments such as swimming pools and food processing areas where wash-down occurs. The enclosure is supplied with a mounting bracket to accept a Discovery or XP95 base.
Beacon Enclosure 29600-318 Protects against water ingress Allows beacon to be used outdoors Accepts MiniDisc Remote Indicator IP67
Please check the Apollo website on a regular basis for up-to-date approvals information.
60
Beacon Bases
61
Please check the Apollo website on a regular basis for up-to-date approvals information.
62
Sounder Beacons
63
IP65 weatherproof Gives two functions at one point Self-test fault monitoring Choice of tones Group addressing and synchronisation of alarm Comes with Isolating Base as standard Loop powered
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have CPD approval
64
65
Sounder Beacon Base with NZ Tone 45681-338 45681-332 45681-334 45681-292 45681-293
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval Does not have CPD approval
66
67
Beacon Enclosure
The Beacon Enclosure is weatherproof allowing a loop-powered beacon to be installed outside and in high moisture environments such as swimming pools.
Beacon Enclosure 29600-318 Can be installed outside IP 67
Magnetic Wand
The Magnetic Wand is used to initiate and terminate actions such as adjusting and setting the sound levels of the Discovery Sounder Beacon Base.
Magnetic Wand 29650-001 Flexibility to set sound output to desired level during walk test Allows local testing of Discovery Sounder Beacon Bases 1.2m when extended
Please check the Apollo website on a regular basis for up-to-date approvals information.
68
Interfaces
Interfaces
Apollo manufactures a comprehensive range of interfaces for intelligent systems which enable fire protection systems to be engineered simply and effectively without the need for custom-designed equipment. There are a variety of interfaces available to suit a number of individual applications.
Interfaces
STANDARD INTERFACES
69
Standard Interfaces are fitted with bi-directional short-circuit isolators so that they are unaffected by a single short circuit on either loop input or output. The exception to this is the Mains Input/Output unit which is not isolated.
Key features of Apollo Interfaces: Easy to install Well protected Modular design A neat solution
Standard Interfaces
70
Interfaces
STANDARD INTERFACES
Input/Output Unit
The Input/Output unit provides a voltage free, double pole change-over (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
Input/Output Unit 55000-847 It can report fault, switch open and switch closed levels Three visible LEDs Loop powered Voltage free Capable of switching up to 30V at 1A
Output Unit
The Output Unit provides a voltage-free single pole, change-over relay output. It is a simplified version of the Input/Output unit without circuitry for monitoring inputs.
Output Unit 55000-849 Capable of switching up to 30V at 1A
Please check the Apollo website on a regular basis for up-to-date approvals information.
Interfaces
STANDARD INTERFACES
71
Switch Monitor
The Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.
Switch Monitor 55000-843 Four input states - normal, fault, pre-alarm and alarm Two visible LEDs Loop powered
Zone Monitor
The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 Loop.
Zone Monitor 55000-845 Loop powered Visible LED
Please check the Apollo website on a regular basis for up-to-date approvals information. *Not isolated
72
Interfaces
STANDARD INTERFACES
With the exception of the Mains Switching Input/Output Unit Apollos range of standard interfaces without Isolators has been discontinued. The alternatives are listed below.
Comparison chart
Product Name Part Number Without Isolator With Isolator
Input/Output Unit Three Channel Input/Output Unit Output Unit Sounder Control Unit Switch Monitor Switch Monitor Plus Zone Monitor Mains Switching I/O Unit
Please check the Apollo website on a regular basis for up-to-date approvals information.
Interfaces
MINI INTERFACES
73
Mini Interfaces use very compact enclosures for installation into other equipment.
Mini Interfaces
74
Interfaces
MINI INTERFACES
Three input states - normal, fault and alarm Visible LED with remote LED connection option Loop powered Designed for use where space is limited Easy to install Monitors equipment where a fast response is required Interrupt facility
Interfaces
DIN-RAIL INTERFACES
75
DIN-Rail Interfaces feature enclosures that clip to standard 35mm DIN-Rails or are screwed to the base of a larger enclosure. They enable fire system designers to determine the functions required and create multi-purpose interfaces for individual sites.
DIN-Rail Interfaces
76
Interfaces
DIN-RAIL INTERFACES
Please check the Apollo website on a regular basis for up-to-date approvals information.
Interfaces
DIN-RAIL INTERFACES
77
DIN-Rail Accessories:
Product Name Part Number Page No.
DIN-Rail Interface Enclosure (4 units) DIN-Rail Interface Enclosure (10 units) DIN-Rail End Stops
85 85
Please check the Apollo website on a regular basis for up-to-date approvals information.
78
79
Please check the Apollo website on a regular basis for up-to-date approvals information.
80
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have CPD approval
81
Please check the Apollo website on a regular basis for up-to-date approvals information.
82
Mounting Accessories
Mounting Accessories
Mounting Accessories
MOUNTING ACCESSORIES
83
Backplate
The Backplate provides a high degree of protection against the ingress of water or dust into the back of the detector mounted directly onto a mounting box. When the backplate is used with an XP95 device, the number tab of the XPERT
card must be snapped off and placed in one of the knockout slots provided in the backplate. Backplate 45681-233 Protects against water ingress Improved performance Fits Discovery, XP95, Orbis, Series 65 and AlarmSense bases
Base Cover
Base Covers are available as part of the Series 65 and XP95 ranges.
Series 65 Base Cover XP95 Base Cover 45681-370 45681-380 Protects base when detector not in situ Aesthetically pleasing
Conduit Box
The Conduit Box is a versatile accessory for surface mounting Apollo bases. The box has knockouts to accept PG16 or M20 cable glands, conduit or mini-trunking. Self-tapping screws are included to fit the detector base to the conduit box.
Conduit Box 45681-204 Easy to install Aesthetically pleasing
Module Base
The Module Base is an accessory which can be secured to a standard base allowing customers to fit their own electronics.
Module Base 38531-822 5mm in depth
Please check the Apollo website on a regular basis for up-to-date approvals information.
84
Mounting Accessories
MOUNTING ACCESSORIES
Beacon Enclosure
The Beacon Enclosure is weatherproof allowing a loop-powered beacon to be installed outside and in high moisture environments such as swimming pools. The enclosure is supplied with a mounting bracket to accept a Discovery or XP95 base.
Beacon Enclosure 29600-318 Protects against water ingress Allows beacon to be used outdoors Accepts MiniDisc remote indicator IP67
Please check the Apollo website on a regular basis for up-to-date approvals information.
Mounting Accessories
MOUNTING ACCESSORIES
85
Please check the Apollo website on a regular basis for up-to-date approvals information.
86
Marine
Marine
Apollo offer both conventional and intelligent ranges of smoke and heat detectors which are approved for use in the marine environment. These detectors operate in the same way and carry the same approvals as standard detectors but are subject to additional approvals tests, specific to the marine environment.
The marine detectors are approved by the following bodies: American Bureau of Shipping Bureau Veritas China Classification Society Det Norske Veritas Germanischer Lloyd Lloyds Register of Shipping Maritime and Coastguard Agency Marine Marchande Franaise
Marine
DISCOVERY MARINE
87
Discovery Marine intelligent fire detectors are suitable for larger vessels. The high specification range has been developed to meet the requirements of sophisticated systems. Discovery gives you total reassurance in installations where it is necessary to adapt detection to different operating environments and where protection against unwanted alarms is paramount.
Key features of Discovery Marine: Approved for use in the marine environment Five response modes for environmental adaptation Day/Night switching for increased reliability Drift compensation for false alarm reduction User programmability for data retention XPERT card addressing for increased security
Discovery
marine
88
Marine
DISCOVERY MARINE
58000-500MAR
58000-700MAR
Please check the Apollo website on a regular basis for up-to-date approvals information.
Marine
DISCOVERY MARINE
89
Please check the Apollo website on a regular basis for up-to-date approvals information.
90
Marine
ORBIS MARINE
Orbis Marine conventional fire detectors offer a wealth of features to save time, enhance reliability and reduce false
Orbis
marine
alarms within the marine environment. These include drift compensation and DirtAlert, a feature that warns service engineers via a flashing yellow LED that detectors need maintenance; and patented FasTest, a procedure that takes just four seconds to test smoke detectors and confirm that they are functioning correctly.
Key features of Orbis Marine: Approved for use in marine environments Modern, low-profile design TImeSaver Base for fast installation Transient rejection for false alarm reduction High humidity tolerance at up to 98%RH Wide operating temperature -40C to +70C
Marine
ORBIS MARINE
91
Please check the Apollo website on a regular basis for up-to-date approvals information.
92
Marine
ORBIS MARINE
Please check the Apollo website on a regular basis for up-to-date approvals information.
Marine
ORBIS MARINE
93
Please check the Apollo website on a regular basis for up-to-date approvals information.
94
There are many places where an explosive mixture of air and gas or vapour is, or may be present continuously, intermittently or as a result of an accident. These are defined as hazardous areas by BS EN 60079, the code of practice for installation and maintenance of electrical apparatus in potentially explosive atmospheres. Hazardous areas are common in petroleum and chemical engineering plants and in factories processing and storing gases, solvents, paints and other volatile substances. Electrical equipment for use in these areas needs to be designed so that it cannot ignite an explosive mixture, not only in normal operation but also in fault conditions. There are a number of methods available to achieve this but one of the most common is intrinsic safety. Apollo offer both conventional and intelligent smoke and heat detector ranges designed to be intrinsically safe, as they meet the requirements of the ATEX directive.
Intrinsically Safe
XP95 IS
95
XP95 Intrinsically Safe (IS) detectors are a development of the well established intelligent XP95 range from Apollo. XP95 IS detectors feature all the benefits of the standard range, but are developed specifically for use in hazardous areas. The addresses of XP95 IS detectors are set by means of the patented XPERT card. See page 23 for more details.
XP95 IS
96
Intrinsically Safe
XP95 IS
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have LPCB or CPD approval
Intrinsically Safe
XP95 IS
97
Please check the Apollo website on a regular basis for up-to-date approvals information.
98
Intrinsically Safe
ORBIS IS
Orbis IS is a range of conventional detectors which have been developed from the standard Orbis smoke and heat detectors. Orbis IS is a range with modern styling and is electronically
Orbis IS
intrinsically safe
compatible with Apollo Series 60 intrinsically safe conventional detectors. Orbis IS is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range, Apollo has put ease of installation and reliability in daily operation at the forefront of considerations.
Features include: TimeSaver Base Patented FasTest enabling functional testing in four seconds DirtAlert indicates limit of drift compensation Tolerates extreme operating conditions: -40C to +70 C False alarm reduction Flashing LED option
Intrinsically Safe
ORBIS IS
99
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval
Orbis IS Adaptor
The Orbis IS Adaptor enables Orbis IS detector heads to be fitted into existing Series 60 IS bases in order to upgrade systems with minimal disruption.
Orbis IS Adaptor ORB-BA-50008-APO Allows an existing range to be updated with ease Eliminates the need for re-wiring
Galvanic Barrier
The Galvanic barrier is installed in the safe area and ensures system integrity.
Ideal for conventioanl hazardous areas Enables compliance with the ATEX directive
Galvanic Barrier
29600-378
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have VdS approval
102 UL
UL
Apollo has developed ranges of detectors for the American market and those markets which require UL classification. Apollo has carefully researched and developed the ranges to ensure that they meet not only the UL and other standards but also the demands of todays high technology environments.
UL 103
XP95A
The XP95A range of analog addressable fire detectors is advanced in design and performance and offers unique features that benefit both the installer and the end user.
The range is based on Apollos XP95 range. XP95A has a central intelligence system where all the decisions are made by the control panel. Each detector is addressed using Apollos patented XPERT card, supplied with the mounting bases. The XP95A range includes an ionization detector, a photo-electric detector, a heat detector, a multisensor, an isolator and a series of modules.
XP95A
UL
Key features of XP95A include: XPERT card addressing Analog value report Address confirmation Alarm flag Unobtrusive design Error check
104 UL
XP95A
XP95A Multisensor
The XP95A Multisensor contains a photo-electric smoke sensor and a thermistor (temperature sensor) whose outputs are combined to give the final analog value.
XP95A Multisensor 55000-886 Sensitive to a wide range of fires Well suited for environments such as hotel bedrooms or warehouse loading bays Unaffected by wind or atmospheric pressure
Please check the Apollo website on a regular basis for up-to-date approvals information. Does not have ULC approval * Does not have UL approval
UL 105
XP95A
45681-210USA 45681-225USA
XP95A Isolator
The XP95A Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.
XP95A Isolator 55000-750 Detects wiring short-circuits using patented technology Minimises disruption from short-circuits Automatic de-isolation on short-circuit removal Up to 20 devices may be installed between isolators
Please check the Apollo website on a regular basis for up-to-date approvals information.
106 UL
XP95A
Please check the Apollo website on a regular basis for up-to-date approvals information.
UL 107
XP95A
Please check the Apollo website on a regular basis for up-to-date approvals information.
108 UL
SERIES 65A
Series 65A
UL
UL 109
SERIES 65A
Responds well to fast burning, flaming fires Designed to operate in a variety of environments Wide operating voltage Flashing LED option Flashing LED and magnet operated test switch option
Series 65A Photo-Electric Detector 55000-325 with flashing LED and magnetic test switch S65A Photo-Electric High Sensitivity 55000-328
Please check the Apollo website on a regular basis for up-to-date approvals information.
110 UL
SERIES 65A
45681-257 45681-258
Please check the Apollo website on a regular basis for up-to-date approvals information.
UL 111
SERIES 65A
Please check the Apollo website on a regular basis for up-to-date approvals information.
112 UL
DISCOVERY UL
Discovery
UL
Discovery UL is a range of highspecification, intelligent fire detectors developed to meet the requirements of sophisticated systems while providing engineers with an additional dimension in fire protection capability. Discovery UL has a distributed intelligence system where decisions are made in the detector head as well as at the control panel. Drift compensation is also incorporated into the detector, allowing it to adapt to dirty or dusty environments, which reduces false alarms.
Each detector in the Discovery UL range can operate in one of five response modes, which can be selected from the control panel. The response characteristics have been carefully set so that the detectors comply with the requirements of the relevant part of UL in all response modes. Mode One will give a higher sensitivity to fire than Mode five. Discovery gives you total reassurance in installations where adaptability to changing conditions and protection against unwanted alarms are paramount.
Key features of Discovery UL include: Rejection of transient signals Flashing LED option ive response modes for ease of optimization to F changing environments Drift compensation to ensure constant sensitivity Four bytes of non-volatile memory for user data Alarm flag for fast alarm reporting Conventional alarm facility during control panel processor fault 360 visibility in alarm Compatible with XP95A systems
UL 113
DISCOVERY UL
Please check the Apollo website on a regular basis for up-to-date approvals information.
114 UL
DISCOVERY UL
XP95A Isolator
The XP95A Isolator can be used on a Discovery UL loop and is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.
XP95A Isolator 55000-750 Detects wiring short circuits using patented technology Minimises disruption from short-circuits Automatic de-isolation on short-circuit removal Up to 20 devices may be installed between isolators
Please check the Apollo website on a regular basis for up-to-date approvals information.
UL 115
DISCOVERY UL
To keep a fire detection system in good working order, it should be subject to a routine maintenance programme in accordance with locally applicable regulations. Over the course of a year, every detector in the system should be functionally tested at least once, using recommended equipment. Apollo offer a range of test equipment, for both conventional and intelligent systems to enable you to do this.
Discovery Programmer
The Discovery Programmer is a portable test and configuration tool for Discovery smoke and heat detectors.
Discovery Programmer 53832-030 Look up the date of manufacture Check the drift compensation value Display and change the operating mode Select/de-select LED flash mode Tests detectors Reads approval codes
Accessories:
Product Name Part Number
55000-872
Please check the Apollo website on a regular basis for up-to-date approvals information.
In addition to the main test kits, Apollo provide a range of equipment to enable you to keep your system in good working order.
Product Name Part Number
FOR INSTALLATION AND REMOVAL OF DETECTORS: Detector Extract Tool Extension Pole, 1.13m Telescopic Pole, 1.26m to 4.5m 1.5mm Hexagonal Driver (locks detectors to bases) XPERT Card Insertion Tool FOR IN SITU FUNCTIONAL TESTING OF INDIVIDUAL DETECTORS: Solo Smoke Dispenser Head Aerosol Test Gas Heat Detector Test Pole (240V) Heat Detector Test Pole (110V) Cordless Heat Tester Kit Cordless Heat Detector Tester CO Test Gas Detector Duster Battery Batons Battery Charger* Testifire Smoke/Heat Unit Smoke/Heat Kit Smoke/Heat/CO Unit Smoke/Heat/CO Kit 6-Pack Replacement Smoke Capsule 3-Pack Replacement Smoke Capsule 6-Pack Replacement CO Capsule 3-Pack Replacement CO Capsule Battery Batons Battery Charger* 29600-459 29600-460 29600-461 29600-462 29600-463 29600-464 29600-465 29600-466 29600-183 29600-214 29600-100 29600-225 29600-229 29600-231 29600-212 29600-213 29600-235 29600-449 29600-183 29600-214 29600-102 29600-103 29600-104 29600-095 45681-235
Please check the Apollo website on a regular basis for up-to-date approvals information. *When ordering please state if you require an EU lead or UK lead.
Additional Services
Loop Calculator
The Apollo Loop Calculator is a free computer programme used to establish the viability of a design. It enables engineers to calculate the total loop loading in a proposed Discovery or XP95 fire detection system by inputting relevant variables, for example control equipment, loop devices and cable length and type. Parameters are included for Apollo protocol compatible panels. Please see the Apollo website for more details www.apollo-fire.co.uk/loop-calc
SimSystem
SimSystem is a tool for simulating loops of detectors and interfaces in order to demonstrate a system and prove the design without having to connect actual products to a control panel. SimSystem consists of a software programme which features an intuitive graphical display and an interface which runs up to four loops. A maximum of two interfaces can be connected, thus allowing a system of up to eight loops to be simulated.
Training
Apollo offers a series of free one-day training courses for its customers. The courses cover the following modules: Module 1: Module 2: Detection Principles & Device Selection Conventional Detector Operation
Module 1.1: Carbon Monoxide Fire Detection (Coming soon) Module 2.1: AlarmSense Module 2.2: Orbis (Coming soon) Module 3: Analogue Addressable Principles Module 3.1: XP95 Module 3.2: Discovery Module 3.3: XPlorer Module 3.4: AV Alarm Devices (Coming soon) Module 3.5: XPander Module 4: Module 5: Intrinsically Safe Equipment (Coming soon) S ervice, Test & Maintenance
In addition to the standard training courses, Apollo can offer tailor-made courses if required. The majority of courses are held at Apollos head office, but on-site training is also available. You can find out more about Apollos training days and book your place by visiting www.apollo-fire.co.uk/training
122 Approvals
Approvals
Class BS Heat Detector Class BS Heat Detector with flashing LED Class CR Heat Detector Class CR Heat Detector with flashing LED Class CS Heat Detector Class CS Heat Detector with flashing LED Optical Smoke Detector Optical Smoke Detector with flashing LED Multisensor Smoke Detector Multisensor Smoke Detector with flashing LED TimeSaver Base TimeSaver Base LX TimeSaver Relay Base TimeSaver Deep Base Orbis IS Class A1R Heat Detector Class A1R Heat Detector with flashing LED Class A1S Heat Detector Class A1S Heat Detector with flashing LED Class A2S Heat Detector Class A2S Heat Detector with flashing LED Class BR Heat Detector Class BR Heat Detector with flashing LED Class BS Heat Detector Class BS Heat Detector with flashing LED Class CR Heat Detector Class CR Heat Detector with flashing LED Class CS Heat Detector Class CS Heat Detector with flashing LED Multisensor Detector Multisensor Detector with flashing LED Optical Smoke Detector Optical Smoke Detector with flashing LED Adaptor TimeSaver Base Series 65 Class A1R Heat Detector with flashing LED and magnetic test switch Class A1R Heat Detector with flashing LED Class A1R Heat Detector Class BR Heat Detector with flashing LED and magnetic test switch Class BR Heat Detector with flashing LED Class BR Heat Detector Class CR Heat Detector with flashing LED and magnetic test switch Class CR Heat Detector with flashing LED Class CR Heat Detector Class CS Heat Detector with flashing LED and magnetic test switch Class CS Heat Detector with flashing LED Class CS Heat Detector Integrating Ionisation Smoke Detector with flashing LED and magnetic test switch
ORB-HT-11004-APO ORB-HT-11016-APO ORB-HT-11005-APO ORB-HT-11017-APO ORB-HT-11006-APO ORB-HT-11018-APO ORB-OP-12001-APO ORB-OP-12003-APO ORB-OH-13001-APO ORB-OH-13003-APO ORB-MB-00001-APO ORB-MB-00002-APO ORB-RB-10004-APO ORB-MB-00019-APO
Apollo Fire Detectors has a library that contains Apollo Fire Detectors has a library that contains hundreds of different types of product certificate that have been obtained from many different national and international bodies. Listed below is a small selection. Please see our website for more details and up-to-date approvals information.
Loss Prevention Certification Board (LPCB) The LPCB is an international certification body who specialises in the fields of security and fire protection. LPCB approval is recognised by governments and regulatory authorities worldwide, particularly in Europe, the Asia-Pacific and the Middle East. The LPCB approval process involves the assessment and testing of products to ensure that they meet quality standards set by a team of industry experts. Testing is carried out in-house by LPCB and the approval is maintained by regular audits to ensure that the product continues to meet the approval criteria. Apollo products with LPCB approval: Orbis Class A1R Heat Detector Class A1R Heat Detector with flashing LED Class A1S Heat Detector Class A1S Heat Detector with flashing LED Class A2S Heat Detector Class A2S Heat Detector with flashing LED Class BR Heat Detector Class BR Heat Detector with flashing LED
ORB-HT-51145-APO ORB-HT-51146-APO ORB-HT-51147-APO ORB-HT-51158-APO ORB-HT-51157-APO ORB-HT-51148-APO ORB-HT-51149-APO ORB-HT-51150-APO ORB-HT-51151-APO ORB-HT-51152-APO ORB-HT-51153-APO ORB-HT-51154-APO ORB-HT-51155-APO ORB-HT-51156-APO ORB-OH-53027-APO ORB-OH-53028-APO ORB-OP-52027-APO ORB-OP-52028-APO ORB-BA-10008-APO ORB-MB-50018-APO
55000-120 55000-121 55000-122 55000-125 55000-126 55000-127 55000-130 55000-131 55000-132 55000-135 55000-136 55000-137 55000-218
Approvals 123
Integrating Ionisation Smoke Detector with flashing LED Integrating Ionisation Smoke Detector Ionisation Smoke Detector with flashing LED and magnetic test switch Ionisation Smoke Detector with flashing LED Ionisation Smoke Detector Optical Smoke Detector with flashing LED and magnetic test switch Optical Smoke Detector with flashing LED Optical Smoke Detector Standard Base Diode Base Standard Relay Base Auxiliary Contacts Base Relay 12V EOL Base Relay 24V EOL Base XP95 Class CS Heat Detector Class A2S Heat Detector Ionisation Smoke Detector Optical Smoke Detector Multisensor Detector Mounting Base 20D Isolating Base Low Power Relay Base Manual Call Point (Surface) Manual Call Point with Isolator (Surface) Isolator Base XP95 Interfaces Three Channel Input/Output Unit Switch Monitor Plus Switch Monitor Zone Monitor Input/Output Unit Output Unit Sounder Control Unit XP95 IS Class A2S Heat Detector Ionisation Smoke Detector Optical Smoke Detector Standard Manual Call Point Standard Base Discovery Heat Detector - Variable Temperature Ionisation Smoke Detector Optical Smoke Detector Multisensor Detector Mounting Base 20D Isolating Base Manual Call Point (Surface) Manual Call Point (Surface)
55000-219 55000-220 55000-215 55000-216 55000-217 55000-315 55000-316 55000-317 45681-200 45681-201 45681-245 45681-246 45681-247 45681-248
VdS VdS is an international and independent testing and certification body based in Germany who specialises in the fields of fire prevention and security. With over 100 years experience, VdS inspects and certifies products to ensure they meet standards jointly established by VdS and industry experts. Apollo products with VdS approval: Orbis Class A1R Heat Detector Class A1S Heat Detector Class A2S Heat Detector Class BR Heat Detector Class BS Heat Detector Class CR Heat Detector Class CS Heat Detector Optical Smoke Detector Multisensor Smoke Detector TimeSaver Base TimeSaver LX Base TimeSaver Diode Base TimeSaver Relay Base Orbis IS Class A1R Heat Detector Class A1S Heat Detector Class A2S Heat Detector Class BR Heat Detector Class BS Heat Detector Class CR Heat Detector Class CS Heat Detector Multisensor Detector Optical Smoke Detector Adaptor TimeSaver Base Series 65 Class A1R Heat Detector Class BR Heat Detector Class CR Heat Detector Class CS Heat Detector Ionisation Smoke Detector Integrating Ionisation Smoke Detector Optical Smoke Detector Standard Base Standard Relay Base Auxiliary Contacts Base Relay Base - 12V EOL Relay Base - 24V EOL XP95 XP95 Heat Detector Ionisation Smoke Detector Optical Smoke Detector
55000-401 55000-400 55000-500 55000-600 55000-885 45681-210 45681-284 45681-242 55100-905 55100-908 45681-211
ORB-HT-11001-APO ORB-HT-11166-APO ORB-HT-11002-APO ORB-HT-11003-APO ORB-HT-11004-APO ORB-HT-11005-APO ORB-HT-11006-APO ORB-OP-12001-APO ORB-OH-13001-APO ORB-MB-00001-APO ORB-MB-00002-APO ORB-DB-00003-APO ORB-RB-10004-APO
ORB-HT-51145-APO ORB-HT-51147-APO ORB-HT-51157-APO ORB-HT-51149-APO ORB-HT-51151-APO ORB-HT-51153-APO ORB-HT-51155-APO ORB-OH-53027-APO ORB-OP-52027-APO ORB-BA-10008-APO ORB-MB-50018-APO
55000-122 55000-127 55000-132 55000-137 55000-217 55000-220 55000-317 45681-200 45681-245 45681-246 45681-247 45681-248
124 Approvals
Multisensor Detector 20D Positive Short Circuit Isolator 20D Negative Short Circuit Isolator Isolator Base Interfaces Three Channel Input/Output Unit Switch Monitor Plus Switch Monitor Zone Monitor Input/Output Unit Output Unit Sounder Control Unit Sounders Integrated Base Sounder DIN tone Sounder Beacon Base Discovery Variable Temperature Heat Detector Ionisation Smoke Detector Optical Smoke Detector Multisensor Detector Mounting Base
Photo-Electric Smoke Detector with flashing LED Photo-Electric Smoke Detector - Standard Standard Base 4 Standard Base 6 Low Profile Base 6 E-Z Fit Base 4 Conventional Standard Relay Base 4 Conventional Auxiliary Contact Base 4 Conventional Relay 12V EOL Base 4 Conventional Relay 24V EOL Base XP95A Beam Detector High Temperature Heat Detector Ionization Smoke Detector Photo-Electric Smoke Detector Multisensor Detector Negative Isolator 4 Addressable Base Isolator Base 6 Addressable Base 6 Addressable Low Profile Relay Base 6 Addressable E-Z Fit Base 20D Negative Isolating Base XP95A Interfaces Dual Switch Monitor Switch Monitor Priority Switch Monitor Switch Monitor Input/Output Unit Sounder Control Unit Mini Priority Switch Monitor Mini Switch Monitor Relay Output Module Discovery Variable Temperature Heat Detector Ionization Smoke Detector Photo-Electric Smoke Detector Multisensor Detector
55000-326 55000-327 45681-200 45681-220 45681-232 45681-251 45681-255 45681-256 45681-257 45681-258
45681-300 45681-334
55000-266 55000-450 55000-550 55000-650 55000-886 55000-750 45681-210 45681-211 45681-225 45681-242 45681-250 45681-321
UL Underwriters Laboratories (UL) is an independent product certification body based in the United States. UL test products against standards set by a team of industry experts and potential customers. There are no laws which specify that a UL mark must be used on a product, however, in the US there are many municipalities that have laws, codes or regulations which require a product to be tested by a recognised testing laboratory such as UL before it can be sold in their area. Apollo products with UL approval: Series 65A Heat Detector 135F - flashing LED 55000-138 and magnetic test switch Heat Detector 135F - flashing LED 55000-139 Heat Detector 135F - Standard 55000-140 Heat Detector 170F - flashing LED 55000-141 and magnetic test switch Heat Detector 170F - flashing LED/ 55000-142 Heat Detector 170F - Standard 55000-143 Heat Detector 200F - flashing LED 55000-144 and magnetic test switch Heat Detector 200F - flashing LED 55000-145 Heat Detector 200F - Standard 55000-146 Ionization Smoke Detector - flashing LED 55000-225 and magnetic test switch Ionization Smoke Detector with flashing LED 55000-226 Ionization Smoke Detector - Standard 55000-227 Photo-Electric Smoke Detector flashing LED 55000-325 and magnetic test switch
ULC (Underwriters Laboratory of Canada) ULC is an independent product certification body that undertakes the quarterly inspection of manufacturers to ensure continued compliance of UL Listed/Recognised products to Agency reports and safety standards. This work is done under contract to UL Inc (Follow-up Services Division). They are not a branch or subsidiary of UL. Apollo products with ULC approval: XP95A Ionization Smoke Detector Photo-Electric Smoke Detector Heat Detector
Approvals 125
Isolator Multisensor Detector Mounting Base 4 Isolator Base Mounting Base 6 Low Power Relay Base 4 E-Z Fit Base Isolating Base XP95A Interfaces Mini Priority Switch Monitor Module Mini Switch Monitor Module Switch Monitor Module Priority Switch Monitor Module Switch Monitor Input/Output Module Sounder Control Module Relay Output Module Series 65A Photo-Electric Smoke Detector Standard Photo-Electric Smoke Detector with flashing LED Photo-Electric Smoke Detector with flashing LED and magnetic test switch 135F Heat Detector Standard 135F Heat Detector with flashing LED 135F Heat Detector with flashing LED and magnetic test switch 170F Heat Detector Standard 170F Heat Detector with flashing LED 170F Heat Detector with flashing LED and magnetic test switch 200F Heat Detector Standard 200F Heat Detector with flashing LED 200F Heat Detector with flashing LED and magnetic test switch Standard Relay Base 4 Auxiliary Relay Base 4 12V End-of-Line Relay Base 4 24V End-of-Line Relay Base 4 E-Z Fit Base 6 Discovery UL Photo-Electric Smoke Detector Heat Detector Multisensor Detector Mounting Base 4 Mounting Base 6 E-Z Fit Base
Apollo products with FM approval: XP95A Ionization Smoke Detector Photo-Electric Smoke Detector Heat Detector Mounting Base 4 Mounting Base 6 Isolator Discovery UL Mounting Base 4 Mounting Base 6 Isolator
55000-327 55000-326 55000-325 55000-140 55000-139 55000-138 55000-143 55000-142 55000-141 55000-146 55000-145 55000-144 45681-255 45681-256 45681-257 45681-258 45681-251
CCCF Fire Product Type Approval or CCCF Approval is a compulsory certification for fire products entering the China market. Apollo products with CCCF approval: XP95 Grade 2 Heat Detector Ionisation Smoke Detector Optical Smoke Detector Surface Mount Manual Call Point Flush Mount Manual Call Point
Discovery Discovery Heat Detector 58000-400MAC Discovery Ionisation Smoke Detector 58000-500MAC Discovery Optical Smoke Detector 58000-600MAC Discovery Multisensor Detector 58000-700MAC Discovery UL Heat Detector 58000-450 Discovery UL Ionization Smoke Detector 58000-550 Discovery UL Photo-Electric Smoke Detector 58000-650 Discovery UL Multisensor Detector 58000-750 Discovery Manual call Point with Isolator 58100-908 Red (Surface) Discovery Manual Call Point - Red (Surface) 58100-910 Orbis Orbis Optical Smoke Detector with flashing LED Orbis Multisensor with flashing LED Orbis A1R Heat Detector with flashing LED Orbis A2S Heat Detector with flashing LED Orbis BR Heat Detector with flashing LED Orbis BS Heat Detector with flashing LED Orbis CR Heat Detector with flashing LED Orbis CS Heat Detector with flashing LED Orbis Marine Optical Smoke Detector with flashing LED Orbis Marine Multisensor Detector with flashing LED Orbis Marine A1R Heat Detector with flashing LED
ORB-OP-12003-PRC ORB-OH-13003-PRC ORB-HT-11013-PRC ORB-HT-11014-PRC ORB-HT-11015-PRC ORB-HT-11016-PRC ORB-HT-11017-PRC ORB-HT-11018-PRC ORB-OP-42003-MAC ORB-OH-43003-MAC ORB-HT-41013-MAC
FM FM Approvals certifies products and services with a unique focus on objectively testing property loss prevention products and services and certifying those that meet rigorous loss prevention standards.
126 Approvals
Orbis Marine A2S Heat Detector with flashing LED ORB-HT-41014-MAC Orbis Marine BR Heat Detector with flashing LED ORB-HT-41015-MAC Orbis Marine BS Heat Detector with flashing LED ORB-HT-41016-MAC Orbis Marine CR Heat Detector with flashing LED ORB-HT-41017-MAC Orbis Marine CS Heat Detector with flashing LED ORB-HT-41018-MAC XP95 XP95 Waterproof Manual Call Point Orbis IS Detectors Orbis IS A1R Heat Detector with flashing LED Orbis IS A2S Heat Detector with flashing LED Orbis IS BR Heat Detector with flashing LED Orbis IS BS Heat Detector with flashing LED Orbis IS CR Heat Detector with flashing LED Orbis IS CS Heat Detector with flashing LED Orbis IS Optical Smoke Detector with flashing LED Orbis IS Multisensor with flashing LED XP95 IS XP95 IS Heat Detector XP95 IS Ionisation Smoke Ddetector XP95 IS Optical Smoke Detector XP95 IS Manual Call Point without flap - red XP95 IS Manual Call Point MEDC Push Button -red XP95 IS Manual Call Point MEDC Push Button - yellow
55000-950
Construction Products Directive (CPD) The CPD is one of the New Approach Directives to create a single European market by removing technical barriers to trade between Member States. Products which meet the essential requirements of the relevant directives will be eligible for CE marking and may be placed on the market anywhere within the EEA. Apollo products with CPD approval: AlarmSense Integrating Optical Detector Heat Detector A1R Heat Detector CS Base Sounder Base LR Sounder Base Sounder Beacon Base LR Sounder Beacon Base Manual Call Point (Surface) Series 65 Class A1R Heat Detector with flashing LED and magnetic test switch Class A1R Heat Detector with flashing LED Class A1R Heat Detector
Class BR Heat Detector with 55000-125 flashing LED and magnetic test switch Class BR Heat Detector with flashing LED 55000-126 Class BR Heat Detector 55000-127 Class CR Heat Detector with 55000-130 flashing LED and magnetic test switch Class CR Heat Detector with flashing LED 55000-131 Class CR Heat Detector 55000-132 Class CS Heat Detector with 55000-135 flashing LED and magnetic test switch Class CS Heat Detector with flashing LED 55000-136 Class CS Heat Detector 55000-137 French Ionisation Smoke Detector 55000-208 French Optical Smoke Detector 55000-308 Ionisation Smoke Detector with 55000-215 flashing LED and magnetic test switch Ionisation Smoke Detector with flashing LED 55000-216 Ionisation Smoke Detector 55000-217 Integrating Ionisation Smoke Detector 55000-218 with flashing LED and magnetic test switch Integrating Ionisation Smoke Detector 55000-219 with flashing LED Integrating Ionisation Smoke Detector 55000-220 Optical Smoke Detector with 55000-315 flashing LED and magnetic test switch Optical Smoke Detector with flashing LED 55000-316 Optical Smoke Detector 55000-317 Standard Base 45681-200 Standard Relay Base 45681-245 Auxiliary Relay Base 45681-246 Relay 12V EOL Base 45681-247 Relay 24V EOL Base 45681-248 Orbis Class A1R Heat Detector Class A1R Heat Detector with flashing LED Class A1S Heat Detector Class A1S Heat Detector with flashing LED Class A2S Heat Detector Class A2S Heat Detector with flashing LED Class BR Heat Detector Class BR Heat Detector with flashing LED Class BS Heat Detector Class BS Heat Detector with flashing LED Class CR Heat Detector Class CR Heat Detector with flashing LED Class CS Heat Detector Class CS Heat Detector with flashing LED Optical Smoke Detector Optical Smoke Detector with flashing LED Multisensor Smoke Detector Multisensor Smoke Detector with flashing LED TimeSaver Base TimeSaver Base LX TimeSaver Deep Base
ORB-HT-11001-APO ORB-HT 11013-APO ORB-HT-11166-APO ORB-HT-11167-APO ORB-HT-11002-APO ORB-HT-11014-APO ORB-HT-11003-APO ORB-HT-11015-APO ORB-HT-11004-APO ORB-HT-11016-APO ORB-HT-11005-APO ORB-HT-11017-APO ORB-HT-11006-APO ORB-HT-11018-APO ORB-OP-12001-APO ORB-OP-12003-APO ORB-OH-13001-APO ORB-OH-13003-APO ORB-MB-00001-APO ORB-MB-00002-APO ORB-MB-00019-APO
Approvals 127
Orbis IS Class A1R Heat Detector Class A1R Heat Detector with flashing LED Class A1S Heat Detector Class A1S Heat Detector with flashing LED Class A2S Heat Detector Class A2S Heat Detector with flashing LED Class BR Heat Detector Class BR Heat Detector with flashing LED Class BS Heat Detector Class BS Heat Detector with flashing LED Class CR Heat Detector Class CR Heat Detector with flashing LED Class CS Heat Detector Class CS Heat Detector with flashing LED Multisensor Detector Multisensor Detector with flashing LED Optical Smoke Detector Optical Smoke Detector with flashing LED Adaptor TimeSaver Base XP95 Class A2S Heat Detector Class CS Heat Detector Ionisation Smoke Detector Optical Smoke Detector Multisensor Smoke Detector Mounting Base Isolating Base XP95 Interfaces Three Channel Input/Output Unit Switch Monitor Plus Switch Monitor Zone Monitor Input/Output Unit Output Unit Sounder Control Unit XP95 IS Class A2S Heat Detector Ionisation Smoke Detector Optical Smoke Detector Base Manual Call Point (Red) Discovery Heat Detector Ionisation Smoke Detector Isolating Base Optical Smoke Detector Multisensor Detector Mounting Base
ORB-HT-51145-APO ORB-HT-51146-APO ORB-HT-51157-APO ORB-HT-51158-APO ORB-HT-51147-APO ORB-HT-51148-APO ORB-HT-51149-APO ORB-HT-51150-APO ORB-HT-51151-APO ORB-HT-51152-APO ORB-HT-51153-APO ORB-HT-51154-APO ORB-HT-51155-APO ORB-HT-51156-APO ORB-OH-53027-APO ORB-OH-53028-APO ORB-OP-52027-APO ORB-OP-52028-APO ORB-BA-10008-APO ORB-MB-50018-APO
Base Sounders Integrated Base Sounder with Isolator Integrated Base Sounder Slow Whoop Integrated Base Sounder with Isolator Slow Whoop Integrated Base Sounder Integrated Base Sounder with Short Circuit Isolator (DIN tone) Intelligent Base Sounder Intelligent Base Sounder for Isolating Base Intelligent Base Sounder Slow Whoop Intelligent Base Sounder Slow Whoop for Isolating Base Series 65 Sounder Base Series 65 Sounder Base with Diode Sounder Beacon Multi-Tone Open Area Sounder Beacon Red Sounder Beacon Base with Isolator Sounder Beacon Base Slow Whoop Sounder Beacon Base with Isolator Sounder Beacon Base with Isolator (DIN Tone) Sounders 100dB(A) Loop-Powered Sounder Red 100dB(A) Loop-Powered Sounder White 100dB(A) Loop-Powered Sounder Slow Whoop Red 100dB(A) Loop-Powered Sounder Slow Whoop White Weatherproof 100dB(A) Sounder Red Weatherproof 100dB(A) Sounder White XPander XPander Optical Smoke Detector and Mounting Base XPander Multisensor Detector and Mounting Base XPander A1R Heat Detector and Mounting Base XPander CS Heat Detector and Mounting Base XPander Manual Call Point XPander Sounder and Sounder Base Red XPander Sounder and Sounder Base White XPander Sounder Beacon and Sounder Base Red XPander Sounder Beacon Amber and Sounder Base White XPander Sounder Beacon and Sounder Base White
45681-277 45681-278 45681-290 45681-291 45681-300 45681-265 45681-266 45681-267 45681-268 45681-512 45681-513
XPA-CB-12034-APO XPA-CB-13032-APO XPA-CB-11170-APO XPA-CB-11171-APO XPA-MC-14006-APO XPA-CB-14001-APO XPA-CB-14002-APO XPA-CB-14003-APO XPA-CB-14004-APO XPA-CB-14005-APO
128 Approvals
ATEX The ATEX directive is compulsory for all equipment which is used in a hazardous area (where an explosive atmosphere might occur). The name ATEX comes from the French ATmospheres EXplosibles. Apollo products with ATEX approval: XP95 IS Ionisation Detector Optical Smoke Detector Heat Detector Base IS Standard Manual Call Points IS MEDC Manual Call Points
Orbis IS Class A1R Heat Detector Class A1R Heat Detector with flashing LED Class A1S Heat Detector Class A1S Heat Detector with flashing LED Class A2S Heat Detector Class A2S Heat Detector with flashing LED Class BR Heat Detector Class BR Heat Detector with flashing LED Class BS Heat Detector Class BS Heat Detector with flashing LED Class CR Heat Detector Class CR Heat Detector with flashing LED Class CS Heat Detector Class CS Heat Detector with flashing LED Multisensor Detector Multisensor Detector with flashing LED Optical Smoke Detector Optical Smoke Detector with flashing LED TimeSaver Base
ORB-HT-51145-APO ORB-HT-51146-APO ORB-HT-51157-APO ORB-HT-51158-APO ORB-HT-51147-APO ORB-HT-51148-APO ORB-HT-51149-APO ORB-HT-51150-APO ORB-HT-51151-APO ORB-HT-51152-APO ORB-HT-51153-APO ORB-HT-51154-APO ORB-HT-51155-APO ORB-HT-51156-APO ORB-OH-53027-APO ORB-OH-53028-APO ORB-OP-52027-APO ORB-OP-52028-APO ORB-MB-50018-APO
26729-152 27249-005 29600-095 29600-098 29600-100 29600-101 29600-102 29600-103 29600-104 29600-110 29600-131 29600-139 29600-183 29600-203 29600-206 29600-212 29600-213 29600-214 29600-225 29600-226 29600-235 29600-239 29600-240 29600-241 29600-256 29600-257 29600-318 29600-350 29600-351 29600-352 29600-353 29600-378 29600-449 29600-458 29600-459 29600-460 29600-461 29600-462 29600-463 29600-464 29600-465 29600-466 29650-001 38531-771 38531-822 45681-200 45681-200USA 45681-201 45681-204 45681-206 45681-209 45681-210 45681-210USA 45681-210MAR 45681-211 45681-211USA 45681-211MAR
Transparent Hinged Cover for Manual Call Point .............................................................79 Deckhead Adaptor PG16-M20...................................84 1.5mm Hexagonal Driver.............................................85 IS Galvanic Barrier............................................................97 Smoke Dispenser Head ........................................... 118 Heat Detector Test Pole (240V) ............................. 118 Detector Extract Tool ................................................. 118 Extension Pole, 1.13m .............................................. 118 Telescopic Pole, 1.26m to 4.5m ............................ 118 Heat Detector Test Pole (110V) ............................ 118 Metal Deckhead Mounting Box (PG16) .................84 Metal Deckhead Mounting Box (M20)...................84 Battery Batons ............................................................. 118 Flame Detector Bracket ................................................47 Flame Detector Weathershield ..................................47 Cordless Heat Tester Kit ........................................... 118 Cordless Heat Detector Tester ............................... 118 Battery Charger ............................................................. 118 Aerosol Test Gas ......................................................... 118 Flame Sensor Test Unit and Case .......................... 117 CO Test Gas .................................................................... 118 DIN-Rail Interface Enclosure (4 units) .............. 77, 85 DIN-Rail Interface Enclosure (10 units) ........... 77, 85 Reflective Beam Detector Backbox .........................49 White Cap ...........................................................................56 Red Cap ...............................................................................56 Beacon Enclosure .............................................59, 67, 84 Firebeam Beam Detector 5-40m .............................49 Firebeam Extension Kit 40-80m................................49 Firebeam Extension Kit 80-100m .............................49 Firebeam Adaptor Plate................................................49 Galvanic Barier ............................................................... 100 Detector Duster............................................................. 118 Base Mounted Flame Detector Bracket .................47 Smoke/Heat Unit.......................................................... 118 Smoke/Heat Kit............................................................. 118 Smoke/Heat/CO Unit.................................................. 118 Smoke/Heat/CO Kit..................................................... 118 6-Pack Replacement Smoke Capsule .................. 118 3-Pack Replacement Smoke Capsule .................. 118 6-Pack Replacement CO Capsule........................... 118 3-Pack Replacement CO Capsule........................... 118 Magnetic Wand................................................................67 Blank XPERT Card.............................................................23 Module Base .....................................................................83 Series 65 Standard Base...............................................31 Series 65A 4 Standard Base ................................... 110 Series 65 Diode Base .....................................................31 Conduit Box .......................................................................83 Series 65 Sav-Wire Base ..............................................32 Intelligent Deep Base...............................................11,19 Intelligent Mounting Base .................................... 11, 18 XP95A 4 Mounting Base ................................ 105,114 Discovery Marine Mounting Base.............................89 Isolator Base .............................................................. 12, 18 XP95A Isolator Base ........................................... 105,114 Discovery Marine Isolator Base .................................89 45681-215 45681-217 45681-219 45681-220USA 45681-225USA 45681-232 45681-233 45681-235 45681-238 45681-242 45681-242UL 45681-244 45681-245 45681-246 45681-247 45681-248 45681-250 45681-251 45681-255 45681-256 45681-257 45681-258 45681-265 45681-266 45681-267 45681-268 45681-276 45681-277 45681-278 45681-284 45681-290 XP95 IS Mounting Base.................................................96 Polycarbonate Deckhead Mounting Box ...................................................................12,19, 28, 84 Intelligent Heater Base .......................................... 12, 19 Series 65A 6 Standard Base.................................. 110 XP95A 6 Mounting Base ................................ 105,114 Series 65A 6 Low Profile Base .............................. 110 Backplate ............................................................................83 XPERT Card Insertion Tool ........................................ 118 Series 90 to XP95 Base Adaptor ...............................85 Intelligent Low Power Relay Base .................... 12, 19 XP95A 4 Low Power Relay Base ......................... 105 AlarmSense Base ............................................................37 Series 65 Standard Relay Base .................................32 Series 65 Auxiliary Relay Base ..................................32 Series 65 End-of-Line Relay Base (12V).................32 Series 65 End-of-Line Relay Base (24V).................32 E-Z Fit Base............................................................. 105,114 Series 65A 6 E-Z Fit Base ......................................... 111 Series 65A 4 Standard Relay Base ...................... 110 Series 65A 4 Auxiliary Relay Base ....................... 110 Series 65A 4 12V End-of-Line Relay Base ........ 110 Series 65A 4 24V End-of-Line Relay Base ........ 110 Intelligent Base Sounder .............................................56 Intelligent Base Sounder for Isolating Base...........56 Intelligent Base Sounder Slow Whoop ..................56 Intelligent Base Sounder Slow Whoop for Isolating Base .............................................................56 Ancillary Base Sounder..................................................56 Integrated Base Sounder with Isolator ...................56 Integrated Base Sounder..............................................56 Isolating Base ..............................................................11,18 Integrated Base Sounder - Slow Whoop with Isolator.......................................................................56
Index
Sequential Part Number List
45681-291 45681-292 45681-293 45681-294 45681-295 45681-300 45681-309 45681-310 45681-311 45681-321 45681-321USA 45681-330 45681-331 45681-332 45681-333 45681-334 45681-335 45681-336 45681-337 45681-338 45681-340 45681-341 45681-370 45681-380 45681-393 45681-508 45681-509 45681-510 45681-512 45681-513 45682-127 53546-021 53546-022 53546-023 53832-020 53832-030 53832-070 55000-001 55000-002 55000-005 55000-006 55000-009 55000-010 55000-020 55000-021 55000-022 55000-023 55000-024 55000-120 55000-121 55000-122 55000-125 55000-126
Integrated Base Sounder - Slow Whoop ...............56 White Cap ................................................................... 56, 65 Red Cap ....................................................................... 56, 65 AlarmSense White Cap ......................................... 57, 65 AlarmSense Red Cap ............................................. 57, 65 Integrated Base Sounder DIN-Tone with Isolator.56 Detector Ceiling Tile Mounting Box..........................84 Sounder Ceiling Tile Mounting Box...........................84 Sounder Ceiling Plate .....................................................83 Intelligent Isolating Base ....................................... 11, 18 XP95A Isolating Base ......................................... 105,114 Sounder Beacon Base with Isolator .........................65 Sounder Beacon Base .................................................65 Sounder Beacon Base Slow Whoop with Isolator.......................................................................65 Loop Powered Beacon Base with Isolator ............61 Sounder Beacon Base with Isolator DIN-Tone ....65 Loop-Powered Beacon Base Standard Flash .......61 Sounder Beacon Base with Australian Tone ........65 Loop-Powered Beacon Base with Australian Flash ................................................................61 Sounder Beacon Base with NZ Tone .......................65 AlarmSense Sounder Beacon Base LR....................65 AlarmSense Sounder Base LR...................................57 Series 65 Base Cover ....................................................83 XP95 Base Cover ............................................................83 Discovery Sounder Beacon Base ..............................65 Series 65 12V Relay Base ............................................32 AlarmSense Sounder Beacon Base ........................65 AlarmSense Sounder Base ..........................................57 Series 65 Sounder Base .............................................57 Series 65 Sounder Base with Diode ........................57 Pre-Addressed XPERT Cards........................................23 Conventional Duct Detector ........................................51 Intelligent Duct Detector...............................................51 Orbis Duct Detector ........................................................51 Conventional Test Set................................................. 117 Discovery Programmer .............................................. 117 MiniDisc Remote Indicator ..............12,19, 28, 33, 37 Intelligent Open-Area Sounder Red .........................54 Intelligent Open-Area Sounder White.....................54 Intelligent Open-Area Sounder Beacon Red.............. Lens.......................................................................................63 Intelligent Open-Area Sounder Beacon Clear Lens ...........................................................................63 Intelligent Open-Area Beacon Red Lens...................59 Intelligent Open-Area Beacon Clear Lens) ...............59 Intelligent IR3 Flame Detector .....................................46 Intelligent Flameproof IR Flame Detector ............46
3
55000-127 55000-130 55000-131 55000-132 55000-135 55000-136 55000-137 55000-138 55000-139 55000-140 55000-141 55000-142 55000-143 55000-144 55000-145 55000-146 55000-182 55000-190 55000-193 55000-196 55000-197 55000-198 55000-199 55000-215 55000-216 55000-217 55000-218 55000-219 55000-220 55000-225 55000-226 55000-227 55000-266 55000-268 55000-273 55000-274 55000-275 55000-276 55000-277 55000-278 55000-279 55000-280
Series 65 BR Heat Detector Standard .....................31 Series 65 CR Heat Detector flashing LED and magnetic test switch ............................................31 Series 65 CR Heat Detector flashing LED ...............31 Series 65 CR Heat Detector Standard......................31 Series 65 CS Heat Detector flashing LED and magnetic test switch ............................................31 Series 65 CS Heat Detector flashing LED................31 Series 65 CS Heat Detector Standard......................31 Series 65A 135F Heat Detector flashing LED and magnetic test switch ......................................... 109 Series 65A 135F Heat Detector flashing LED ... 109 Series 65A 135F Heat Detector Standard.......... 109 Series 65A 170F Heat Detector flashing LED and magnetic test switch ........................................ 109 Series 65A 170F Heat Detector flashing LED .. 109 Series 65A 170F Heat Detector Standard ........ 109 Series 65A 200F Heat Detector flashing LED and magnetic test switch ......................................... 109 Series 65A 200F Heat Detector flashing LED ... 109 Series 65A 200F Heat Detector Standard.......... 109 DIN-Rail Sounder Controller (5 Amperes)..............76 AlarmSense A1R Heat Detector (Standard) .........36 AlarmSense CS Heat Detector (High Temp) ........36 AlarmSense A1R Heat Detector and Sounder Base ....................................................................36 AlarmSense CS Heat Detector and Sounder Base ....................................................................36 AlarmSense A1R Heat Detector and Sounder Beacon Base ...................................................36 AlarmSense CS Heat Detector and Sounder Beacon Base ...................................................36 Series 65 Ionisation Smoke Detector flashing LED and magnetic test switch...................30 Series 65 Ionisation Smoke Detector flashing LED........................................................................30 Series 65 Ionisation Smoke Detector Standard...30 Series 65 Integrating Ionisation Smoke Detector flashing LED and magnetic test switch......30 Series 65 Integrating Ionisation Smoke Detector flashing LED.....................................................30 Series 65 Integrating Ionisation Smoke Detector ..30 Series 65A Ionization Smoke Detector flashing LED and magnetic test switch................ 109 Series 65A Ionization Smoke Detector flashing LED .................................................................. 109 Series 65A Ionization Smoke Detector Standard ........................................................................... 109 XP95A Loop Powered Beam Detector ................ 104 Reflective Beam Detector (5-50m) .........................49 Reflective Beam Detector (50-100m)....................49 Intelligent 100dB(A) Weatherproof Sounder Open-Area Red ................................................................54 Intelligent 100dB(A) Weatherproof Sounder Open-Area White ............................................................54 Intelligent 100dB(A) Open-Area Sounder Slow Whoop Red.............................................................54 Intelligent 100dB(A) Open-Area Sounder Slow Whoop White.........................................................54 Intelligent 100dB(A) Open-Area Sounder Red ....54 Intelligent 100dB(A) Open-Area Sounder White ....................................................................................54 Intelligent IR Flame Detector.....................................46
Intelligent Base Mounted UV Flame Detector .....47 Intelligent Base Mounted UV IR Flame Detector ..47 Intelligent Base Mounted IR Flame Detector.........47
3
Series 65 A1R Heat Detector flashing LED and magnetic test switch ............................................31 Series 65 A1R Heat Detector ....................................31 Series 65 A1R Heat Detector Standard ..................31 Series 65 BR Heat Detector flashing LED and magnetic test switch ............................................31 Series 65 BR Heat Detector flashing LED ...............31
55000-291 55000-292 55000-293 55000-294 55000-295 55000-296 55000-297 55000-298 55000-299 55000-315 55000-316 55000-317 55000-325 55000-326 55000-327 55000-390 55000-391 55000-392 55000-393 55000-394 55000-395 55000-400 55000-401 55000-440 55000-450 55000-500 55000-540 55000-550 55000-588 55000-600 55000-640 55000-650 55000-700MAR 55000-720 55000-750 55000-760 55000-765 55000-790 55000-802 55000-803 55000-804 55000-805 55000-806USA 55000-812 55000-820USA 55000-821
Multi-Tone Open Area Sounder Beacon Red .......63 Multi-Tone Open Area Sounder Beacon White...63 Multi-Tone Open Area Sounder Beacon Red with Isolator.......................................................................63 Multi-Tone Open Area Sounder Beacon White with Isolator.......................................................................63 Flameproof Intelligent IR Flame Detector ............46 Weatherproof Multi-Tone Open Area Sounder Beacon Red........................................................................63 Weatherproof Multi-Tone Open Area Sounder Beacon White ...................................................................63 Weatherproof Multi-Tone Open Area Sounder Beacon Red with Isolator .............................................63 Weatherproof Multi-Tone Open Area Sounder Beacon White with Isolator .........................................63 Series 65 Optical Smoke Detector flashing LED and magnetic test switch....................................30 Series 65 Optical Smoke Detector flashing LED 30 Series 65 Optical Smoke Detector Standard ........30 Series 65A Photo-Electric Smoke Detector flashing LED and magnetic test switch................ 109 Series 65A Photo-Electric Smoke Detector flashing LED .................................................................. 109 Series 65A Photo-Electric Smoke Detector Standard ........................................................................... 109 AlarmSense Optical Smoke Detector......................36 AlarmSense Integrating Optical Smoke Detector ..............................................................................36 AlarmSense Optical Smoke Detector and Sounder Base ....................................................................36 AlarmSense Integrating Optical Smoke Detector and Sounder Base ........................................36 AlarmSense Optical Smoke Detector and Sounder Beacon Base ...................................................36 AlarmSense Integrating Optical Smoke Detector and Sounder Beacon Base........................36 XP95 Heat Detector A2S ..............................................17 XP95 Heat Detector CS .................................................17 XP95 IS Heat Detector ...................................................96 XP95A Heat Detector ................................................. 104 XP95 Ionisation Smoke Detector ..............................17 XP95 IS Ionisation Smoke Detector..........................96 XP95A Ionization Smoke Detector ........................ 104 Three Channel Input/Output Unit..............................70 XP95 Optical Smoke Detector....................................17 XP95 IS Optical Smoke Detector ...............................96 XP95A Photo-Electric Smoke Detector................ 104 Discovery Marine Isolator.............................................89 Isolator ...........................................................................11,18 XP95A Isolator ..................................................... 105,114 Mini Switch Monitor ............................................... 74, 77 Mini Monitor Module .................................................. 106 XP95A Dual Priority Switch Monitor Module..... 107 DIN-Rail Dual Isolator......................................................77 DIN-Rail Input/Output Unit ...........................................76 DIN-Rail Output Unit .......................................................76 XP95A Switch Monitor Module .............................. 106 XP95A Priority Switch Monitor Module ............... 107 DIN-Rail Zone Monitor with Isolator .........................77 XP95A Switch Monitor Input/Output Module... 107 DIN-Rail Switch Monitor Plus ......................................77
55000-822 55000-825 55000-826 55000-830 55000-831 55000-832 55000-833 55000-835 55000-841 55000-843 55000-845 55000-847 55000-849 55000-852 55000-855 55000-856 55000-863 55000-870 55000-872 55000-875 55000-877 55000-878 55000-879 55000-885 55000-886 55000-894 55100-940 55100-942 55100-944 55000-945 55000-960 55000-961 55000-962 55000-963 55000-964 55000-965 55000-966 55000-967 55000-970 55000-971 55000-972 55000-973 55100-905 55100-908 58000-300 58000-400
DIN-Rail Switch Monitor................................................76 XP95A Sounder Control Module............................. 107 DIN-Rail Sounder Control Unit.....................................80 XP95A Mini Priority Switch Monitor Module ..... 106 XP95A Mini Switch Monitor Module .................... 106 Mini Switch Monitor with fly leads (Interrupt).....74 Mini Switch Monitor with fly leads...........................74 AlarmSense Alarm Relay ............................................37 Switch Monitor Plus........................................................71 Switch Monitor .................................................................71 Zone Monitor Unit ...........................................................71 Input/Output Unit ............................................................70 Output Unit.........................................................................70 Sounder Control Unit ......................................................70 XP95 Protocol Translator (Single Channel)............97 XP95 Protocol Translator (Dual Channel) ...............97 XP95A Relay Output Module ................................... 107 XP95 Test Set................................................................. 117 Printer for XP95 Test Set ........................................... 117 Mains Switching Input/Output Unit..........................71 Loop-Powered Beacon Red ........................................59 Loop-Powered Beacon Clear Lens Red Flash.......59 Loop-Powered Beacon Amber ..................................59 XP95 Multisensor Detector..........................................17 XP95A Multisensor Detector ................................... 104 AlarmSense Manual Call Point (Surface) ...............80 XP95 IS Manual Call Point Without Flap - Red......96 XP95 IS Manual Call Point Without Flap - Yellow ..96 XP95 IS Manual Call Point Without Flap Blue/White .........................................................................96 XP95 IS Manual Call Point With Flap Blue/White .........................................................................96 XP95 IS Manual Call Point MEDC Break Glass - Red .........................................................................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Red ......................................................97 XP95 IS Manual Call Point MEDC Break Glass - Yellow ...................................................................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Yellow ................................................97 XP95 IS Manual Call Point MEDC Break Glass - Blue ........................................................................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Blue .....................................................97 XP95 IS Manual Call Point MEDC Break Glass - Black/Yellow Stripes........................................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Black/Yellow Stripes ....................97 XP95 IS Manual Call Point MEDC Push Button - Red ......................................................................97 XP95 IS Manual Call Point MEDC Push Button - Yellow ................................................................97 XP95 IS Manual Call Point MEDC Push Button - Blue .....................................................................97 XP95 IS Manual Call Point MEDC Push Button - Black/Yellow Stripes.....................................97 XP95 Manual Call Point - Red (Surface) .................79 XP95 Manual Call Point with Isolator - Red (Surface) .............................................................................79 Discovery CO Fire Detector..........................................10 Discovery Heat Detector ..............................................10
58000-400MAR 58000-450 58000-500 58000-500MAR 58000-550 58000-600 58000-600MAR 58000-650 58000-700 58000-700MAR 55000-797 58000-750 58100-908 58100-910 51800-920 51800-927 58100-928 58100-929 58100-950 58100-951 58100-970MAR
Discovery Marine Heat Detector...............................88 Discovery UL Heat Detector .................................... 113 Discovery Ionisation Smoke Detector .....................10 Discovery Marine Ionisation Smoke Detector .....88 Discovery UL Ionization Smoke Detector............ 113 Discovery Optical Smoke Detector...........................10 Discovery Marine Optical Smoke Detector ...........88 Discovery UL Photo-Electric Smoke Detector ... 113 Discovery Multisensor Detector ................................10 Discovery Marine Multisensor....................................88 DIN-Rail Mains Input/Output Unit .............................76 Discovery UL Multisensor Detector ....................... 113 Discovery Manual Call Point with Isolator Red (Surface) ....................................................................79 Discovery Manual Call Point - Red (Surface) ........79 Discovery Manual Call Point (non standard) White ...................................................................................79 Discovery Manual Call Point (non standard) Yellow ..................................................................................79 Discovery Manual Call Point (non standard) Blue .......................................................................................79 Discovery Manual Call Point (non standard) Green ...................................................................................79 Waterproof Manual Call Point - Red ........................80 Waterproof Manual Call Point with Isolator Red ........................................................................................80 Discovery Marine Manual Call Point .......................89
ORB-HT-41018-MAR Orbis Marine CS Heat Detector with flashing LED........................................................................91 ORB-HT-51145-APO Orbis IS A1R Heat Detector .........................................99 ORB-HT-51146-APO Orbis IS A1R Heat Detector with flashing LED......99 ORB-HT-51147-APO Orbis IS A2S Heat Detector..........................................99 ORB-HT-51148-APO Orbis IS A2S Heat Detector with flashing LED......99 ORB-HT-51149-APO Orbis IS BR Heat Detector ............................................99 ORB-HT-51150-APO Orbis IS BR Heat Detector with flashing LED ........99 ORB-HT-51151-APO Orbis IS BS Heat Detector.............................................99 ORB-HT-51152-APO Orbis IS BS Heat Detector with flashing LED.........99 ORB-HT-51153-APO Orbis IS CR Heat Detector.............................................99 ORB-HT-51154-APO Orbis IS CR Heat Detector with flashing LED.........99 ORB-HT-51155-APO Orbis IS CS Heat Detector .............................................99 ORB-HT-51156-APO Orbis IS CS Heat Detector with flashing LED .........99 ORB-HT-51157-APO Orbis IS A1S Heat Detector..........................................99 ORB-HT-51158-APO Orbis IS A1S Heat Detector with flashing LED......99 ORB-MB 50018-APO Orbis IS Timesaver Base ........................................... 100 ORB-MB-00001-APO TimeSaver Base ...............................................................27 ORB-MB-00002-APO TimeSaver LX Base .........................................................27 ORB-MB-00012-APO Orbis LX Base ....................................................................27 ORB-MB-00019-APO TimeSaver Deep Base ...................................................28 ORB-MB-00001-MAR Orbis Marine TimeSaver Base ....................................92 ORB-OH-13001-APO Orbis Multisensor Detector..........................................26 ORB-OH-13003-APO Orbis Multisensor Detector with flashing LED........................................................................26 ORB-OH-43001-MAR Orbis Marine Multisensor Detector ..........................91 ORB-OH-43003-MAR Orbis Marine Multisensor Detector with flashing LED ............................................................91 ORB-OH-53027-APO Orbis IS Multisensor Detector .....................................99 ORB-OH-53028-APO Orbis IS Multisensor with flashing LED ....................99 ORB-OP-12001-APO Orbis Optical Smoke Detector ....................................26 ORB-OP-12003-APO Orbis Optical Smoke Detector with flashing LED........................................................................26 ORB-OP-42001-MAR Orbis Marine Optical Smoke Detector ....................91 ORB-OP-42003-MAR Orbis Marine Optical Smoke Detector with flashing LED .............................................................91 ORB-OP-52027-APO Orbis IS Optical Smoke Detector ...............................99 ORB-OP-52028-APO Orbis IS Optical Smoke Detector with flashing LED........................................................................99 ORB-RB-10004-APO TimeSaver Relay Base ...................................................27 ORB-RB-40004-MAR Orbis Marine Relay Base...............................................92 ORB-SW-10005-APO Sav-Wire Base ..................................................................29 XPA-CB-11170-APO XPander A1R Heat Detector and Mounting Base..42 XPA-CB-11171-APO XPander CS Heat Detector and Mounting Base ..42 XPA-CB-12034-APO XPander Optical Smoke Detector and Mounting Base .................................................................42 XPA-CB-13032-APO XPander Multisensor Detector and Mounting Base .................................................................42 XPA-CB-14001-APO XPander Sounder and Sounder Base Red .............89 XPA-CB-14002-APO XPander Sounder and Sounder Base White .........89 XPA-CB-14003-APO XPander Red Sounder Beacon and Red Sounder Base ....................................................................63 XPA-CB-14004-APO XPander Amber Sounder Beacon and White Sounder Base.......................................................63 XPA-CB-14005-APO XPander Clear Sounder Beacon and White Sounder Base.......................................................63 XPA-IN-14007-APO XPA-TE-14010-APO XPander Interface Unit ..................................................43 XPander Survey Tool ......................................................43 XPA-MC-14006-APO XPander Manual Call Point...........................................80
ORB-BA-10008-APO S65 to Orbis Base Adaptor ..........................................85 ORB-BA-50008-APO Orbis IS Adaptor ............................................................ 100 ORB-DB-00003-APO TimeSaver Diode Base ..................................................27 ORB-HB-00020-APO Orbis Heater Base ...........................................................28 ORB-HT-11001-APO Orbis A1R Heat Detector Standard...........................26 ORB-HT-11002-APO Orbis A2S Heat Detector Standard ...........................26 ORB-HT-11003-APO Orbis BR Heat Detector Standard..............................26 ORB-HT-11004-APO Orbis BS Heat Detector Standard ..............................26 ORB-HT-11005-APO Orbis CR Heat Detector Standard ..............................26 ORB-HT-11006-APO Orbis CS Heat Detector Standard ..............................26 ORB-HT-11013-APO Orbis A1R Heat Detector with flashing LED ..........26 ORB-HT-11014-APO Orbis A2S Heat Detector with flashing LED ..........26 ORB-HT-11015-APO Orbis BR Heat Detector with flashing LED .............26 ORB-HT-11016-APO Orbis BS Heat Detector with flashing LED .............26 ORB-HT-11017-APO Orbis CR Heat Detector with flashing LED .............26 ORB-HT-11018-APO Orbis CS Heat Detector with flashing LED..............26 ORB-HT-11166-APO Orbis A1S Heat Detector ..............................................26 ORB-HT-11167-APO Orbis A1S Heat Detector with flashing LED ..........26 ORB-HT-41001-MAR Orbis Marine A1R Heat Detector...............................91 ORB-HT-41002-MAR Orbis Marine A2S Heat Detector ...............................91 ORB-HT-41003-MAR Orbis Marine BR Heat Detector..................................91 ORB-HT-41004-MAR Orbis Marine BS Heat Detector ..................................91 ORB-HT-41005-MAR Orbis Marine CR Heat Detector..................................91 ORB-HT-41006-MAR Orbis Marine CS Heat Detector ..................................91 ORB-HT-41013-MAR Orbis Marine A1R Heat Detector with flashing LED........................................................................91 ORB-HT-41014-MAR Orbis Marine A2S Heat Detector with flashing LED........................................................................91 ORB-HT-41015-MAR Orbis Marine BR Heat Detector with flashing LED........................................................................91 ORB-HT-41016-MAR Orbis Marine BS Heat Detector with flashing LED........................................................................91 ORB-HT-41017-MAR Orbis Marine CR Heat Detector with flashing LED........................................................................91
AlarmSense
35
AlarmSense Alarm Relay ..........................................55000-835 ........................37 AlarmSense A1R Heat Detector (Standard).......55000-190 ........................36 AlarmSense A1R Heat Detector and Sounder Base..................................................................55000-196 ........................36 AlarmSense A1R Heat Detector and Sounder Beacon Base .................................................55000-198 ........................36 AlarmSense Base ..........................................................45681-244 ........................37 AlarmSense CS Heat Detector (High Temp) ......55000-193 ........................36 AlarmSense CS Heat Detector and Sounder Base..................................................................55000-197 ........................36 AlarmSense CS Heat Detector and Sounder Beacon Base .................................................55000-199 ........................36 AlarmSense Integrating Optical Smoke Detector ............................................................55000-391 ........................36 AlarmSense Integrating Optical Smoke Detector and Sounder Base ......................55000-393 ........................36 AlarmSense Integrating Optical Smoke Detector and Sounder Beacon Base......55000-395 ........................36 AlarmSense Manual Call Point (Flush) ..................55000-893 ........................80 AlarmSense Manual Call Point (Surface) .............55000-894 ........................80 AlarmSense Optical Smoke Detector ...................55000-390 ........................36 AlarmSense Optical Smoke Detector and Sounder Base.........................................................55000-392 ........................36 AlarmSense Optical Smoke Detector and Sounder Beacon Base ........................................55000-394 ........................36 AlarmSense Red Cap ...................................................45681-295 ................ 57, 65 AlarmSense Sounder Base........................................45681-510 ........................57 AlarmSense Sounder Base LR ................................45681-341 ........................57 AlarmSense Sounder Beacon Base ......................45681-509 ........................65 AlarmSense Sounder Beacon Base LR .................45681-340 ........................65 AlarmSense White Cap...............................................45681-294 ................ 57, 65 AV Accessories 66 Series 65 Sounder Base with Diode ......................45681-513 ........................57 White Cap (for Intelligent Base Sounder)............26900-256 ........................56 White Cap (for Integrated Base Sounder)...........45681-292 ........................56 Beacon Bases 60
Index
Product
Loop-Powered Beacon Base with Isolator .........45681-333 ........................61 Loop-Powered Beacon Base....................................45681-335 ........................61 Loop-Powered Beacon Base with Australian Flash ..............................................................45681-337 ........................61 Red Cap.............................................................................45681-293 ........................61 White Cap.........................................................................45681-292 ........................61 Beacons 58
Beacon Enclosure ..........................................................29600-318 ........................67 Magnetic Wand .............................................................29650-001 ........................67 Base Sounders 55
AlarmSense Sounder Base........................................45681-510 ........................57 AlarmSense Sounder Base LR ................................45681-341 ........................57 Ancillary Base Sounder ...............................................45681-276 ........................56 Integrated Base Sounder ...........................................45681-278 ........................56 Integrated Base Sounder - Slow Whoop.............45681-291 ........................56 Integrated Base Sounder - Slow Whoop with Isolator ....................................................................45681-290 ........................56 Integrated Base Sounder DIN-tone with Isolator ....................................................................45681-300 ........................56 Integrated Base Sounder with Isolator.................45681-277 ........................56 Intelligent Base Sounder ...........................................45681-265 ........................56 Intelligent Base Sounder for Isolating Base ........45681-266 ........................56 Intelligent Base Sounder Slow Whoop ................45681-267 ........................56 Intelligent Base Sounder Slow Whoop for Isolating Base...........................................................45681-268 ........................56 Red Cap (for Intelligent Base Sounder) ................29600-257 ........................56 Red Cap (for Integrated Base Sounder)...............45681-293 ........................56 Series 65 Sounder Base ...........................................45681-512 ........................57 DIN-Rail Interfaces 75 DIN-Rail Dual Isolator ...................................................55000-802 ........................77 DIN-Rail Input/Output Unit.........................................55000-803 ........................76 DIN-Rail Interface Enclosure (10 units) .................29600-240 ................ 77, 85 DIN-Rail Interface Enclosure (4 units)....................29600-239 ................ 77, 85 DIN-Rail Mains Input/Output Unit ...........................55000-797 ........................76 DIN-Rail Output Unit .....................................................55000-804 ........................76 DIN-Rail Sounder Controller (5 Amperes) ...........55000-182 ........................76
Beacon Enclosure ..........................................................29600-318 ........................59 Intelligent Open-Area Beacon Red Lens ..................55000-009 ........................59 Intelligent Open-Area Beacon Clear Lens..................55000-010 ........................59 Loop-Powered Beacon Amber ...............................55000-879 ........................59 Loop-Powered Beacon Clear Lens Red Flash ....55000-878 ........................59 Loop-Powered Beacon Red......................................55000-877 ........................59
DIN-Rail Switch Monitor .............................................55000-822 ........................76 DIN-Rail Switch Monitor Plus ....................................55000-821 ........................77 DIN-Rail Zone Monitor with Isolator.......................55000-812 ........................77 Mini Switch Monitor.....................................................55000-760 ........................77 Discovery 9
Discovery Manual Call Point - Red (Surface)......58100-910 ........................79 Discovery Manual Call Point with Isolator Red (Surface) ..................................................................58100-908 ........................79 Transparent Hinged Cover for Manual Call Point ...........................................................................26729-152 ........................79 Waterproof Manual Call Point - Red ......................58100-950 ........................80 Waterproof Manual Call Point with Isolator - Red...................................................................58100-951 ........................80 XP95 Manual Call Point - Red (Surface) ...............55100-905 ........................79 XP95 Manual Call Point with Isolator Red (Surface) ..................................................................55100-908 ........................79 XPander Manual Call Point ........................................XPA-MC-14006-APO.....80 Mini Interfaces 73
Discovery Carbon Monoxide Fire Detector.........58000-300 ........................10 Discovery Heat Detector ............................................58000-400 ........................10 Discovery Ionisation Smoke Detector...................58000-500 ........................10 Discovery Manual Call Point (non standard) White..................................................................................51800-920 ........................79 Discovery Manual Call Point (non standard) Yellow ................................................51800-927 ........................79 Discovery Manual Call Point (non standard) Blue .....................................................58100-928 ........................79 Discovery Manual Call Point (non standard) Green..................................................58100-929 ........................79 Discovery Manual Call Point - Red (Surface)......58100-910 ........................79 Discovery Manual Call Point with Isolator Red (Surface) ..................................................................58100-908 ........................79 Discovery Multisensor Detector ..............................58000-700 ........................10 Discovery Optical Smoke Detector ........................58000-600 ........................10 Discovery Programmer ..............................................53832-030 ..................... 117 Discovery Sounder Beacon Base ............................45681-393 ........................65 Intelligent Deep Base ..................................................45681-209 ........................11 Isolator...............................................................................55000-720 ........................11 Intelligent Mounting Base..........................................45681-210 ........................11 Isolating Base..................................................................45681-284 ........................11 MiniDisc Remote Indicator.........................................53830-070 ........................12 Discovery Marine 87
Mini Switch Monitor.....................................................55000-760 ........................74 XP95 Mini Switch Monitor with fly leads ............55000-833 ........................74 XP95 Mini Switch Monitor with fly leads (Interrupt).........................................................................55000-832 ........................74 Mounting Accessories 82
1.5mm Hexagonal Driver ..........................................29600-095 ........................85 Backplate ..........................................................................45681-233 ........................83 Beacon Enclosure ..........................................................29600-318 ........................84 Conduit Box .....................................................................45681-204 ........................83 Deckhead Adaptor PG16-M20 ................................27249-005 ........................84 Detector Ceiling Tile Mounting Box .......................45681-309 ........................84 DIN-Rail Interface Enclosure (10 units) .................29600-240 ........................85 DIN-Rail Interface Enclosure (4 units)....................29600-239 ........................85 Metal Deckhead Mounting Box (M20) ................29600-139 ........................84 Metal Deckhead Mounting Box (PG16)...............29600-131 ........................84 Module Base ...................................................................38531-822 ........................83 Polycarbonate Deckhead Mounting Box .............45681-217 ........................84 Series 65 to Orbis Base Adaptor .............................ORB-BA-10008-APO .....85 Series 90 to XP95 Base Adaptor.............................45681-238 ........................85 Series 65 Base Cover .................................................45681-370 ........................83 Sounder Ceiling Plate...................................................45681-311 ........................83 Sounder Ceiling Tile Mounting Box ........................45681-310 ........................87 XP95 Base Cover .........................................................45681-380 ........................83 Orbis 25
Discovery Marine Heat Detector ............................58000-400MAR ..............88 Discovery Marine Ionisation Smoke Detector ...58000-500MAR ..............88 Discovery Marine Isolator ..........................................55000-700MAR ..............88 Discovery Marine Isolator Base ...............................45681-211MAR ..............89 Discovery Marine Manual Call Point .....................58100-970MAR ..............89 Discovery Marine Mounting Base ..........................45681-210MAR ..............89 Discovery Marine Multisensor .................................58000-700MAR ..............88 Discovery Marine Optical Smoke Detector.........58000-600MAR ..............88 Discovery UL 112
MiniDisc Remote Indicator.........................................53832-070 ........................28 Orbis A1R Heat Detector............................................ORB-HT-11001-APO ......26 Orbis A1R Heat Detector with flashing LED ........ORB-HT-11013-APO ......26 Orbis A1S Heat Detector ............................................ORB-HT-11166-APO ......26 Orbis A1S Heat Detector with flashing LED ........ORB-HT-11167-APO ......26 Orbis A2S Heat Detector ............................................ORB-HT-11002-APO ......26 Orbis A2S Heat Detector with flashing LED ........ORB-HT-11014-APO ......26 Orbis BR Heat Detector...............................................ORB-HT-11003-APO ......26 Orbis BR Heat Detector with flashing LED...........ORB-HT-11015-APO ......26 Orbis BS Heat Detector ...............................................ORB-HT-11004-APO ......26 Orbis BS Heat Detector with flashing LED ...........ORB-HT-11016-APO ......26 Orbis CR Heat Detector ...............................................ORB-HT-11005-APO ......26 Orbis CR Heat Detector with flashing LED ...........ORB-HT-11017-APO ......26 Orbis CS Heat Detector ...............................................ORB-HT-11006-APO ......26 Orbis CS Heat Detector with flashing LED ...........ORB-HT-11018-APO ......26
Discovery UL Heat Detector ....................................58000-450 ..................... 113 Discovery UL Ionization Smoke Detector ............58000-550 ..................... 113 Discovery UL Multisensor Detector........................58000-750 ..................... 113 Discovery UL Photo-Electric Smoke Detector ....58000-650 ..................... 113 XP95A Isolating Base...................................................45681-321USA ............. 114 XP95A 4 Mounting Base ..........................................45681-210USA ............. 114 XP95A 6 Mounting Base ..........................................45681-225USA ............. 114 XP95A E-Z Fit Base .......................................................45681-250 ..................... 114 XP95A Isolator ...............................................................55000-750 ..................... 114 XP95A Isolator Base.....................................................45681-211USA ............. 114 Manual Call Points 78
AlarmSense Manual Call Point (Flush) ..................55000-893 ........................80 AlarmSense Manual Call Point (Surface) .............55000-894 ........................80
Orbis LX Base ..................................................................ORB-MB-00012-APO ....27 Orbis Duct Detector......................................................53546-023 ........................51 Orbis Heater Base .........................................................ORB-HB-00020-APO .....28 Orbis Multisensor Detector .......................................ORB-OH-13001-APO .....26 Orbis Multisensor Detector with flashing LED .....................................................................ORB-OH-13003-APO .....26 Orbis Optical Smoke Detector..................................ORB-OP-12001-APO .....26 Orbis Optical Smoke Detector with flashing LED .....................................................................ORB-OP-12003-APO .....26 TimeSaver Base .............................................................ORB-MB-00001-APO ....27 TimeSaver Deep Base.................................................ORB-MB-00019-APO ....28 TimeSaver Diode Base................................................ORB-DB-00003-APO .....27 TimeSaver LX Base.......................................................ORB-MB-00002-APO ....27 TimeSaver Relay Base ................................................ORB-RB-10004-APO......27 Sav-Wire Base ................................................................ORB-SW-10005-APO ....28 Polycarbonate Deckhead Mounting Box .............45681-217 ........................84 Waterproof Base Cover ..............................................45681-519 ........................28 Orbis IS 98
Orbis Marine CR Heat Detector ...............................ORB-HT-41005-MAR .....91 Orbis Marine CR Heat Detector with flashing LED .....................................................................ORB-HT-41017-MAR .....91 Orbis Marine CS Heat Detector................................ORB-HT-41006-MAR .....91 Orbis Marine CS Heat Detector with flashing LED .....................................................................ORB-HT-41018-MAR .....91 Orbis Marine Multisensor Detector ........................ORB-OH-43001-MAR ....91 Orbis Marine Optical Smoke Detector ..................ORB-OP-42001-MAR ....91 Orbis Marine Relay Base ............................................ORB-RB-40004-MAR.....92 Orbis Marine TimeSaver Base..................................ORB-MB-00001-MAR ...92 Orbis Marine Multisensor Detector with flashing LED .....................................................................ORB-OH-43003-MAR ....91 Orbis Marine Optical Smoke Detector with flashing LED ...........................................................ORB-OP-42003-MAR ....91 Series 65A 108
Series 65A 135F Heat Detector flashing LED ......55000-139 ..................... 109 Series 65A 135F Heat Detector flashing LED and magnetic test switch ..........................................55000-138 ..................... 109 Series 65A 135F Heat Detector Standard ..........55000-140 ..................... 109 Series 65A 170F Heat Detector flashing LED ......55000-142 ..................... 109 Series 65A 170F Heat Detector flashing LED and magnetic test switch ..........................................55000-141 ..................... 109 Series 65A 170F Heat Detector Standard ..........55000-143 ..................... 109 Series 65A 200F Heat Detector flashing LED ......55000-145 ..................... 109 Series 65A 200F Heat Detector flashing LED and magnetic test switch ..........................................55000-144 ..................... 109 Series 65A 200F Heat Detector Standard ..........55000-146 ..................... 109 Series 65A 4 12V End-of-Line Relay Base.........45681-257 ..................... 110 Series 65A 4 24V End-of-Line Relay Base.........45681-258 ..................... 110 Series 65A 4 Auxiliary Relay Base ........................45681-256 ..................... 110 Series 65A 4 Standard Base ...................................45681-200USA ............. 110 Series 65A 4 Standard Relay Base .......................45681-255 ..................... 110 Series 65A 6 E-Z Fit Base .........................................45681-251 ..................... 111 Series 65A 6 Low Profile Base...............................45681-232 ..................... 110 Series 65A 6 Standard Base ...................................45681-220USA ............. 110 Series 65A Ionization Smoke Detector flashing LED ...................................................................55000-226 ..................... 109 Series 65A Ionization Smoke Detector flashing LED and magnetic test switch ................55000-225 ..................... 109 Series 65A Ionization Smoke Detector Standard ...........................................................................55000-227 ..................... 109 Series 65A Photo-Electric Smoke Detector flashing LED ...................................................................55000-326 ..................... 109 Series 65A Photo-Electric Smoke Detector flashing LED and magnetic test switch ................55000-325 ..................... 109 Series 65A Photo-Electric Smoke Detector Standard ...........................................................................55000-327 ..................... 109 Series 65 29
Galvanic Barrier ..............................................................29600-378 ..................... 100 Orbis IS A1R Heat Detector .......................................ORB-HT-51145-APO ......99 Orbis IS A1R Heat Detector with flashing LED .....ORB-HT-51146-APO ......99 Orbis IS A1S Heat Detector .......................................ORB-HT-51157-APO ......99 Orbis IS A1S Heat Detector with flashing LED ......ORB-HT-51158-APO .......99 Orbis IS A2S Heat Detector ...........................................ORB-HT-51147-APO .......99 Orbis IS A2S Heat Detector with flashing LED ......ORB-HT-51148-APO .......99 Orbis IS Adaptor .................................................................ORB-BA-50008-APO ... 100 Orbis IS BR Heat Detector..............................................ORB-HT-51149-APO .......99 Orbis IS BR Heat Detector with flashing LED.........ORB-HT-51150-APO .......99 Orbis IS BS Heat Detector ..............................................ORB-HT-51151-APO .......99 Orbis IS BS Heat Detector with flashing LED .........ORB-HT-51152-APO .......99 Orbis IS CR Heat Detector ..............................................ORB-HT-51153-APO .......99 Orbis IS CR Heat Detector with flashing LED .........ORB-HT-51154-APO .......99 Orbis IS CS Heat Detector ..............................................ORB-HT-51155-APO .......99 Orbis IS CS Heat Detector with flashing LED .........ORB-HT-51156-APO .......99 Orbis IS Multisensor Detector...................................ORB-OH-53027-APO .....99 Orbis IS Multisensor with flashing LED..................ORB-OH-53028-APO .....99 Orbis IS Optical Smoke Detector .............................ORB-OP-52027-APO .....99 Orbis IS Optical Smoke Detector with flashing LED .....................................................................ORB-OP-52028-APO .....99 Orbis IS Timesaver IS Base .......................................ORB-MB-50018-APO . 100 Orbis Marine 90
Orbis Marine A1R Heat Detector ............................ORB-HT-41001-MAR .....91 Orbis Marine A1R Heat Detector with flashing LED .....................................................................ORB-HT-41013-MAR .....91 Orbis Marine A2S Heat Detector ............................ORB-HT-41002-MAR .....91 Orbis Marine A2S Heat Detector with flashing LED .....................................................................ORB-HT-41014-MAR .....91 Orbis Marine BR Heat Detector ...............................ORB-HT-41003-MAR .....91 Orbis Marine BR Heat Detector with flashing LED .....................................................................ORB-HT-41015-MAR .....91 Orbis Marine BS Heat Detector ...............................ORB-HT-41004-MAR .....91 Orbis Marine BS Heat Detector with flashing LED .....................................................................ORB-HT-41016-MAR .....91
MiniDisc Remote Indicator.........................................53832-070 ........................33 Series 65 12V Relay Base ..........................................45681-508 ........................31 Series 65 Auxiliary Relay Base ...............................45681-246 ........................31 Series 65 Base Cover .................................................45681-370 ........................83 Series 65 Diode Base...................................................45681-201 ........................31
Series 65 End-of-Line Relay Base (12V) ..............45681-247 ........................32 Series 65 End-of-Line Relay Base (24V) ..............45681-248 ........................32 Series 65 Sav-Wire Base ............................................45681-206 ........................32 Series 65 Standard Base ............................................45681-200 ........................31 Series 65 A1R Heat Detector flashing LED ..........55000-121 ........................31 Series 65 A1R Heat Detector flashing LED and magnetic test switch ..........................................55000-120 ........................31 Series 65 A1R Heat Detector Standard ................55000-122 ........................31 Series 65 BR Heat Detector flashing LED ..........55000-126 ........................31 Series 65 BR Heat Detector flashing LED and magnetic test switch ..........................................55000-125 ........................31 Series 65 BR Heat Detector Standard ...................55000-127 ........................31 Series 65 CR Heat Detector flashing LED ..........55000-131 ........................31 Series 65 CR Heat Detector flashing LED and magnetic test switch ..........................................55000-130 ........................31 Series 65 CR Heat Detector Standard ...................55000-132 ........................31 Series 65 CS Heat Detector flashing LED ...........55000-136 ........................31 Series 65 CS Heat Detector flashing LED and magnetic test switch ..........................................55000-135 ........................31 Series 65 CS Heat Detector Standard ...................55000-137 ........................31 Series 65 Integrating Ionisation Smoke Detector ............................................................................55000-220 ........................30 Series 65 Integrating Ionisation Smoke Detector flashing LED ..................................................55000-219 ........................30 Series 65 Integrating Ionisation Smoke Detector flashing LED and magnetic test switch .................55000-218 ........................30 Series 65 Ionisation Smoke Detector flashing LED .....................................................................55000-216 ........................30 Series 65 Ionisation Smoke Detector flashing LED and magnetic test switch ................55000-215 ........................30 Series 65 Ionisation Smoke Detector Standard ...........................................................................55000-217 ........................30 Series 65 Optical Smoke Detector flashing LED ...................................................................55000-316 ........................30 Series 65 Optical Smoke Detector flashing LED and magnetic test switch ................55000-315 ........................30 Series 65 Optical Smoke Detector Standard ......55000-317 ........................30 Series 65 Sounder Base..............................................45681-512 ........................57 Series 65 Standard Relay Base ...............................45681-245 ........................32
Sounder Beacons
62
Intelligent Open-Area Sounder Beacon Clear Lens (Sonos) ........................................................55000-006 ........................63 Intelligent Open-Area Sounder Beacon Red Lens (Sonos) ..........................................................55000-005 ........................63 Multi-Tone Open Area Sounder Beacon Red.....55000-291 ........................63 Multi-Tone Open Area Sounder Beacon Red with Isolator ....................................................................55000-293 ........................63 Multi-Tone Open Area Sounder Beacon White ..55000-292 ........................63 Multi-Tone Open Area Sounder Beacon White with Isolator ....................................................................55000-294 ........................63 Weatherproof Multi-Tone Open Area Sounder Beacon Red ...................................................55000-296 ........................63 Weatherproof Multi-Tone Open Area Sounder Beacon Red with Isolator.........................55000-298 ........................63 Weatherproof Multi-Tone Open Area Sounder Beacon White ...............................................55000-297 ........................63 Weatherproof Multi-Tone Open Area Sounder Beacon White with Isolator ....................55000-299 ........................63 XPander Amber Sounder Beacon and White Sounder Base ....................................................XPA-CB-14004-APO ......63 XPander Clear Sounder Beacon and White Sounder Base ....................................................XPA-CB-14005-APO ......63 XPander Red Sounder Beacon and Red Sounder Base ........................................................XPA-CB-14003-APO ......63 Sounders 53
Intelligent 100dB(A) Open-Area Sounder Red..55000-278 ........................54 Intelligent 100dB(A) Open-Area Sounder Slow Whoop Red ..........................................................55000-276 ........................54 Intelligent 100dB(A) Open-Area Sounder Slow Whoop White ......................................................55000-277 ........................54 Intelligent 100dB(A) Open-Area Sounder White..................................................................................55000-279 ........................54 Intelligent 100dB(A) Open-Area Weatherproof Sounder Red......................................55000-274 ........................54 Intelligent 100dB(A) Open-Area Weatherproof Sounder White..................................55000-275 ........................54 Intelligent Open-Area Sounder Red (Sonos)......55000-001 ........................54 Intelligent Open-Area Sounder White (Sonos) ...55000-002 ........................54 XPander Sounder and Sounder Base Red ...........XPA-CB-14001-APO ......54 XPander Sounder and Sounder Base White.......XPA-CB-14002-APO ......54
64 Specialist 44 Base Mounted Flame Detector Bracket...............29600-458 ........................47 Conventional Duct Smoke Detector ......................53546-021 ........................51 Firebeam Adaptor Plate .............................................29600-353 ........................49 Firebeam Beam Detector 5-40m ...........................29600-350 ........................49 Firebeam Extension Kit 40-80m .............................29600-351 ........................49 Firebeam Extension Kit 80-100m...........................29600-352 ........................49 Flame Detector Bracket..............................................29600-203 ........................46 Flame Detector Weathershield................................29600-206 ........................46 Intelligent Base Mounted UV IR Flame Detector ...........................................................................55000-023 ........................47 Intelligent Base Mounted UV Flame Detector ...55000-022 ........................47 Intelligent Base Mounted IR3 Flame Detector ............................................................................55000-024 ........................47
AlarmSense Red Cap ...................................................45681-295 ........................65 AlarmSense Sounder Beacon Base ......................45681-509 ........................65 AlarmSense Sounder Beacon Base LR .................45681-340 ........................65 AlarmSense White Cap...............................................45681-294 ........................65 Discovery Sounder Beacon Base ............................45681-393 ........................65 Red Cap.............................................................................45681-293 ........................65 Sounder Beacon Base ..............................................45681-331 ........................65 Sounder Beacon Base Slow Whoop with Isolator ....................................................................45681-332 ........................65 Sounder Beacon Base with Australian Tone ......45681-336 ........................65 Sounder Beacon Base with Isolator.......................45681-330 ........................65 Sounder Beacon Base with Isolator DIN-Tone ....45681-334 ........................65 Sounder Beacon Base with NZ Tone ....................45681-338 ........................65 White Cap.........................................................................45681-292 ........................65
Intelligent Duct Detector ............................................53546-022 ........................51 Intelligent Flameproof IR Flame Detector..........55000-295 ........................46 Intelligent Flameproof IR Flame Detector..........55000-021 ........................46 Intelligent IR Flame Detector ..................................55000-280 ........................46 Intelligent IR Flame Detector ..................................55000-020 ........................46
3
XP95
16
Intelligent Deep Base ..................................................45681-209 ........................19 Intelligent Mounting Base..........................................45681-210 ........................18 Isolator...............................................................................55000-720 ........................18 Isolator Base....................................................................45681-211 ........................18 Low Power Relay Base...............................................45681-242 ........................19 New Isolating Base ......................................................45681-284 ........................18 MiniDisc Remote Indicator.........................................53832-070 ........................19 Polycarbonate Deckhead Mounting Box .............29600-196 ........................19 Printer for XP95 Test Set............................................55000-872 ..................... 117 Waterproof Base Cover ..............................................45681-519 ........................19 XP95 Base Cover .........................................................45681-380 ........................83 XP95 Heat Detector High Temperature ...............55000-401 ........................17 XP95 Heat Detector Standard ..................................55000-400 ........................17 XP95 Heater Base .........................................................45681-219 ........................19 XP95 Ionisation Smoke Detector ............................55000-500 ........................17 XP95 Manual Call Point - Red (Surface) ...............55100-905 ........................79 XP95 Manual Call Point with Isolator Red (Surface) ..................................................................55100-908 ........................79 XP95 Multisensor Detector .......................................55000-885 ........................17 XP95 Optical Smoke Detector .................................55000-600 ........................17 XP95 Test Set .................................................................55000-870 ..................... 117 XP95A 103
Orbis Duct Detector......................................................53546-023 ........................51 Reflective Beam Detector (50-100m) .................55000-273 ........................49 Reflective Beam Detector (5-50m).......................55000-268 ........................49 Reflective Beam Detector Backbox.......................29600-241 ........................49 Standard Interfaces 69
Input/Output Unit ..........................................................55000-847 ........................70 Mains Switching Input/Output Unit .......................55000-875 ........................71 Output Unit ......................................................................55000-849 ........................70 Sounder Control Unit....................................................55000-852 ........................70 Switch Monitor Plus .....................................................55000-841 ........................71 Switch Monitor...............................................................55000-843 ........................71 Three Channel Input/Output Unit ...........................55000-588 ........................70 Three Channel Input/Output Unit PCB only ........43781-588 ........................70 Zone Monitor Unit .........................................................55000-845 ........................71 Test Equipment and Maintenance 116
1.5mm Hexagonal Driver (locks detectors to bases) .........................................................................29600-095 .................... 118 Aerosol Test Gas ..........................................................29600-225 .................... 118 Battery Batons ..............................................................29600-183 .................... 118 Battery Charger (No Mains Lead)...........................29600-214 .................... 118 Conventional Test Set .................................................53832-020 ..................... 117 Cordless Heat Detector Tester ................................29600-213 .................... 118 Cordless Heat Tester Kit ............................................29600-212 .................... 118 CO Test Gas .....................................................................29600-235 ..................... 114 Detector Extract Tool ..................................................29600-102 .................... 118 Discovery Programmer ..............................................53832-030 ..................... 117 Extension Pole, 1.13m ...............................................29600-103 .................... 118 Flame Sensor Test Unit and Case ...........................29600-226 ..................... 117 Heat Detector Test Pole (110V) .............................29600-110 .................... 118 Heat Detector Test Pole (240V) ..............................29600-101 .................... 118 Printer for XP95 Test Set............................................55000-872 ..................... 117 Smoke Dispenser Head ............................................29600-100 .................... 118 Telescopic Pole, 1.26m to 4.5m ............................29600-104 .................... 118 Detector Duster .............................................................29600-449 ..................... 118 Smoke/Heat Unit ..........................................................29600-459 ..................... 118 Smoke/Heat Kit .............................................................29600-460 ..................... 118 Smoke/Heat/CO Unit ..................................................29600-461 ..................... 118 Smoke/Heat/CO Kit .....................................................29600-462 ..................... 118 6-Pack Replacement Smoke Capsule ...................29600-463 ..................... 118 3-Pack Replacement Smoke Capsule ...................29600-464 ..................... 118 6-Pack Replacement CO Capsule ...........................29600-465 ..................... 118 3-Pack Replacement CO Capsule ...........................29600-466 ..................... 118 UK Mains Lead ..............................................................29600-215 .................... 118 XP95 Test Set .................................................................55000-870 ..................... 117 XPERT Card Insertion Tool .........................................45681-235 .................... 118
XP95A Isolating Base...................................................45681-321USA ............. 105 XP95A 4 Low Power Relay Base ..........................45681-242USA ............. 106 XP95A 4 Mounting Base ..........................................45681-210USA ............. 105 XP95A 6 Mounting Base ..........................................45681-225USA ............. 105 XP95A Dual Priority Switch Monitor Module .....55000-790 ..................... 107 XP95A E-Z Fit Base .......................................................45681-250 ..................... 104 XP95A Heat Detector ..................................................55000-450 ..................... 104 XP95A Ionization Smoke Detector.........................55000-550 ..................... 104 XP95A Isolator ...............................................................55000-750 ..................... 105 XP95A Isolator Base.....................................................45681-211USA ............. 105 XP95A Loop Powered Beam Detector ................55000-266 .....................104 XP95A Mini Priority Switch Monitor Module......55000-830 ..................... 106 XP95A Mini Switch Monitor Module .....................55000-831 ..................... 106 XP95A Multisensor Detector ....................................55000-886 ..................... 104 XP95A Photo-Electric Smoke Detector ................55000-650 ..................... 104 XP95A Priority Switch Monitor Module................55000-806 ..................... 107 XP95A Relay Output Module ...................................55000-863 ..................... 107 XP95A Sounder Control Module .............................55000-825 ..................... 107 XP95A Switch Monitor Input/Output Module ...55000-820 ..................... 107 XP95A Switch Monitor Module ...............................55000-805 ..................... 106 Mini Monitor Module ...................................................55000-765 ..................... 106 XP95 IS 95
IS Galvanic Barrier .........................................................29600-098 ........................97 XP95 IS Heat Detector.................................................55000-440 ........................96 XP95 IS Ionisation Smoke Detector .......................55000-540 ........................96 XP95 IS Manual Call Point MEDC Break Glass - Black/Yellow Stripes .....................................55000-966 ........................97
XP95 IS Manual Call Point MEDC Break Glass - Blue......................................................................55000-964 ........................97 XP95 IS Manual Call Point MEDC Break Glass - Red.......................................................................55000-960 ........................97 XP95 IS Manual Call Point MEDC Break Glass - Yellow .................................................................55000-962 ........................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Black/Yellow Stripes ..................55000-967 ........................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Blue...................................................55000-965 ........................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Red....................................................55000-961 ........................97 XP95 IS Manual Call Point MEDC Break Glass with flap - Yellow..............................................55000-963 ........................97 XP95 IS Manual Call Point MEDC Push Button - Black/Yellow Stripes ..................................55000-973 ........................97 XP95 IS Manual Call Point MEDC Push Button - Blue...................................................................55000-972 ........................97 XP95 IS Manual Call Point MEDC Push Button - Red....................................................................55000-970 ........................97 XP95 IS Manual Call Point MEDC Push Button - Yellow ..............................................................55000-971 ........................97 XP95 IS Manual Call Point With Flap Blue/White.......................................................................55000-945 ........................97 XP95 IS Manual Call Point Without Flap Blue/White.......................................................................55100-944 ........................97 XP95 IS Manual Call Point Without Flap - Red ...55100-940 ........................97 XP95 IS Manual Call Point Without Flap - Yellow 55100-942 ........................97 XP95 IS Mounting Base ..............................................45681-215 ........................97 XP95 IS Optical Smoke Detector.............................55000-640 ........................97 XP95 Protocol Translator (Dual) ..............................55000-856 ........................97 XP95 Protocol Translator (Single) ...........................55000-855 ........................97 XPander 41
XPander A1R Heat Detector and Mounting Base ..XPA-CB-11170-APO ......42 XPander Amber Sounder Beacon and White Sounder Base ....................................................XPA-CB-14004-APO ......63 XPander Clear Sounder Beacon and White Sounder Base ....................................................XPA-CB-14005-APO ......63 XPander CS Heat Detector and Mounting Base XPA-CB-11171-APO ......42 XPander Interface Unit ................................................XPA-IN-14007-APO .......43 XPander Manual Call Point ........................................XPA-MC-14006-APO.....80 XPander Multisensor Detector and Mounting Base....................................................................................XPA-CB-13032-APO ......42 XPander Optical Smoke Detector and Mounting Base ...............................................................XPA-CB-12034-APO ......42 XPander Red Sounder Beacon and Red Sounder Base ........................................................XPA-CB-14003-APO ......63 XPander Sounder and Sounder Base Red ...........XPA-CB-14001-APO ......54 XPander Sounder and Sounder Base White.......XPA-CB-14002-APO ......54 XPander Survey Tool ...................................................XPA-TE-14010-APO .......43 XPERT Cards 22
Blank XPERT Card ..........................................................38531-771 ........................23 Pre-Addressed XPERT Cards .....................................45682-127 ........................23
PP2327/2009/Issue 4
Apollo Overseas Offices Apollo America 821 Ulrich Avenue Louisville Kentucky 40219 USA Tel: +1 502 964 6565 Fax: +1 502 964 6229 Email: infoUSA@apollo-fire.com Web: www.apollo-fire.com
Apollo Germany Apollo GmbH Am Anger 31 D-33332 Gtersloh Germany Tel: +49 5241 33060 Fax: +49 5241 330629 Email: verkauf@apollo-feuer.de Web: www.apollo-feuer.de
Apollo Spain Apollo Fire Detectors S.A. Calle Rio Tietar 12 Nave 6 Pol Ind El Nogal 28110 Algete Madrid Spain Tel: +34 9162 89209 Fax: +34 9162 90168 Email: informacin@apollo-fire.com Web: www.apollo-fire.es
Apollo Ireland Apollo Ireland 8 Willbrook Road Rathfarnham Dublin 14 Republic of Ireland Tel: +353 1 493 3896 Email: info-ireland@apollo-fire.co.uk Web: www.apollo-fire.ie
Apollo China Apollo China 24D Huamin Empire Plaza 726 Yan An Road (W) Shanghai 200050 The Peoples Republic of China Tel: +86 21 5237 0922 Fax: +86 21 5237 0920 Email: info-china@apollo-fire.com Web: www.apollo-fire.com.cn