Professional Documents
Culture Documents
Kerry Whalley Geoff Phillips Greg Rickard Stewart Monckton Peter Roberson
Sydney, Melbourne, Brisbane, Perth and associated companies around the world
Pearson Education Australia A division of Pearson Australia Group Pty Ltd Level 9, 5 Queens Road Melbourne 3004 www.pearsoned.com.au/schools Offices in Sydney, Brisbane and Perth, and associated companies throughout the world. Copyright Pearson Education Australia (a division of Pearson Australia Group Pty Ltd) 2004 First published 2004 Reprinted 2005 All rights reserved. Except under the conditions described in the Copyright Act 1968 of Australia and subsequent amendments, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright owner. Designed by Polar Design Edited by Kay Waters Prepress work by The Type Factory Set in Melior 10 pt Printed in China National Library of Australia CataloguinginPublication data: Whalley, Kerry. Science focus 1. For secondary school students. ISBN 0 12 360444 3. 1. Science - Textbooks. I. Roberson, Peter. II. Rickard, Greg. III. Title. IV. Title : Science focus one. 500
ii
Being a scientist
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
Safetybefore we start What is science? Observing Equipment Reporting Measurement Working scientifically Using a Bunsen burner Chapter review
2
3 6 9 12 15 18 24 27 32
UNIT
UNIT
iv v viii 1
112
113 118 129 137 145
Classification
Being alive From kingdom to species Animal classification Plants and other kingdoms More on keys Chapter review
147
148 155 161 171 176 181
UNIT
7
34
35 41 46 48 54 60
UNIT
UNIT
Forces
7.1 Forces: what are they? 7.2 Balanced and unbalanced forces 7.3 Friction: slowing down and getting
moving
182
183 188 191 196 201 204 208 213
7.4 Gravity
Science focus: Flying high 7.5 Forces in water 7.6 Magnetic forces Chapter review
61
62 69 74 79 85
UNIT
Cells
The microscope Plant and animal cells Specialised cells Groups of cells Science focus: Stem cells Chapter review
86
87 94 99 103 108 111
UNIT
UNIT
UNIT
215
216 228 231 235 239 245
246
247 251 256 264 269 276 279 285 287
Index
iii
We thank the following for their contributions to our text book: Anglo-Australian Observatory/David Malin Images: figure 8.0.1.ANTphoto.com: Kelvin Aitken, figure 6.1.9. Arts Centre, Concert Hall: figure 5.4.11. Australia Picture Library: figures SF2.1, 3.2.4, 4.4.4, 5.1.2 a&i, 5.1.4b, 6.1.2, 6.1.8, 6.3.4, 6.3.13, 6.3.16, 6.3.17, 6.4.4, 6.4.5, 6.4.6, 6.5.5, 7.0.1, 7.3.4, 9.2.4, 9.3.3, 9.3.5, 9.3.7, 9.3.14, 9.4.4. Bureau of Meteorology: figures 9.4.1, 9.6.6 a-h. Calder Park Racing Promotions Pty. Ltd: figure 1.2.1a. Cambridge University Press: illustration from Edward Arnold, Science Scene 1, 1990, figure 1.4.3. CSIRO: Science Image Online: figures 1.2.1b, 9.5.6, SF9.1, SF9.2; CSIRO Minerals, figure 3.2.7. Daniela Ciminelli Pearson Education Australia: figures 1.6.7, 5.3.3, 5.3.4, 6.5.11. Dorling Kindersley: figures 2.2.1, 2.2.3, 2.2.5, 4.1.2, 4.1.15; Spike Walker, figures 4.1.16, 5.1.2f, 5.2.10 a&b, 9.2.1, 9.2.2, 9.2.5, 9.2.6, 9.2.7, 9.3.4, 9.3.6, 9.3.8, 9.3.10. Getty Images: figures 6.1.5, 7.2.1. Great Barrier Reef Marine Park Authority: figure SF9.5. Jeramey Jannene 2003: provided with courtesy, figure 6.2.1. Joo Estvo 2004: provided with courtesy, figure. 6.3.20. Karly Abery Pearson Education Australia: figures 1.2.1d, 2.1.1, 2.1.3, 2.1.4, 3.1.3, 3.1.7, 3.2.1, 3.3.5, 4.2.2, 7.3.5. Lisa Piemonte Pearson Education Australia: figure. 3.1.10. Melbourne Water: figure. 3.4.4. NASA: Kennedy Space Center, figures 1.2.1e, SF7.3, 8.4.1, 9.5.2; JSC, figure 5.3.2; GRIN/James McDivitt, figure. 7.4.1; JPL/Caltech, figures 8.1.6, 8.1.8, 8.1.10, 8.1.15, 8.1.17, 8.1.19, 8.1.21, 8.2.2, 8.4.2, SF8.7; JPL/Space Science Institute, figure. 8.1.13.
National Safety Council of Australia Ltd: figure. 1.1.3 a-f. National Science Foundation: Josh Landis, figure. 5.2.3 b. Newspix: Gary Graham, figure. 9.3.9. NOAA: Sanctuary Collection /Scot Anderson fig. 6.3.7; Corps Collection /Commander John Bortniak, figure. 8.2.5. NSW Fire Brigades: provided with courtesy, figure 5.3.13. Photolibrary.com: figures SF2.3, 3.0.1, 3.1.9, 3.3.1, 3.3.6, 4.0.1, 4.1.1, 4.1.3, 4.1.5, 4.1.6, 4.1.8, 4.1.9, 4.1.11, 4.1.12, 4.2.1, 4.2.6, 4.2.8, 4.3.2, 4.3.3, 4.3.7, SF4.4, 5.0.1, 5.1.1, 5.1.3, 5.2.5, 5.2.6, 5.3.5, 6.1.4, 6.2.2, 6.3.2a, 6.3.8, 6.3.14, 6.3.21, 6.4.7, 6.4.8, 7.3.1, 7.5.3, 7.6.1, 8.1.2, 8.1.4, 8.1.11, 8.4.5, 8.4.7, SF8.1, SF8.2, SF8.4, SF8.5, SF8.6, 9.2.3, 9.2.8, 9.3.2, 9.6.7, 9.6.9, SF9.4. Picture Desk, The: figure. 2.2.4. Ralph Kiesewetter 2004: provided with courtesy, figure. 6.3.19. Richard Thrift 2004: provided with courtesy, figure. 6.3.11. Steve Axford 2003: provided with courtesy, figure. 6.3.5. United Media Syndicate, Inc 1974: figure.1.6.1. University of Queensland /Chris Stacey 2003: figure. SF 7.4. U. S. Geological Survey: figure. 6.3.2b; Robert E. Wallace 2004, figures 3.4.1, 9.1.3. Walter & Eliza Hall Institute: provided with courtesy, figure. SF4.5. West Australian, The: provided with courtesy, figure. 7.5.1.
Every effort has been made to trace and acknowledge copyright. However, should any infringement have occurred, the publishers tender their apologies and invite copyright owners to contact them.
iv
The Science Focus series has been written for the NSW Science syllabus, stages 4 and 5. It includes material that addresses the learning outcomes in the domains of knowledge, understanding and skills. Each chapter addresses at least one prescribed focus area in detail. The content is presented through many varied contexts to engage students in seeing the relationship between science and their everyday lives.
Coursebook
The coursebook consists of nine chapters with the following features. Chapter opening pages include: the key prescribed focus area for the chapter outcomes presented in a way that students can easily understand pre quiz questions to stimulate interest and test prior knowledge. Chapter units open with a context to encourage students to make meaning of science in terms of their everyday experiences. The units also reinforce contextual learning by presenting theory, photos, illustrations and science focus boxes in a format that is easy to read and follow.
Each PFA has one special feature which uses a contextual approach to focus specifically on the outcomes of that PFA. Student activities on these pages allow further investigation and exploration of the material covered.
Each unit ends with a set of questions. These begin with straightforward checkpoint questions that build confidence, leading to think, analyse and skills questions that require further thought and application. Questions incorporate the syllabus verbs so that students can begin to practise answering questions as required in examinations in later years. The extension questions can be set for further exploration and assignment work and include a variety of structured tasks including research, creative writing and internet activities suitable for all students. Extension questions cater for a range of learning styles using the multiple intelligences approach, and may be used for extending more able students.
Key numeracy and literacy tasks are indicated with icons. Practical activities follow the questions. These are placed at the end of the unit to allow teachers to choose when and how to best Prac 1 incorporate the Unit 1.2 practical work. Cross references to practical activities within the units signal DYO suggested points for practical work. Some practical activities are design-your-own (DYO) tasks. Chapter review questions follow the last unit in each chapter. These cover all chapter outcomes in a variety of question styles to provide opportunities for all students to consolidate new knowledge and skills.
Online review questions Auto-correcting chapter review questions can be used as a diagnostic tool or for revision at school or home, and include: multiple choice matching labelling fill in the blanks. Results can be emailed directly to teacher or parents.
Destinations A list of reviewed websites is available these relate directly to chapter content for students to access. Technology applications These are activities that apply and review concepts covered in the chapters. They are designed for students to work independently, and include: animations and Quicktime Video to develop key skills and knowledge in a stimulating, visual way drag and drop activities to improve basic understandings in a fun way technology activities to enhance the learning of content in an interactive way.
The use of the Aboriginal flag in the coursebook denotes material that is included to cover Aboriginal perspectives in science.
Companion Website
The companion website contains a wealth of support material for students and teachers, which has been written to enhance the content covered in the coursebook.
vi
Homework Book
The homework book provides a structured program to complement the coursebook. These homework activities: cover various skills required in the syllabus. offer consolidation of >>> key content and HOMEWORK BOOK interesting extension activities. provide revision activities for each chapter, including the construction of a glossary. cater for a multiple intelligences approach through varied activities. have Worksheet icons in the coursebook to denote when a homework activity is available.
Kerry Whalley Geoff Phillips Greg Rickard Stewart Monckton
vii
Verbs
Science Focus 1 uses the following verbs in the student activities.
Account Analyse Apply Assess Calculate Clarify Classify Compare Construct Contrast Draw Demonstrate Describe Design Discuss Distinguish Evaluate Examine Explain Gather state reasons for, report on identify components and the relationships among them; draw out and relate implications use, utilise, employ in a particular situation make a judgement of value, quality, outcomes, results or size determine from given facts, figures or information make clear or plain arrange or include in classes/categories show how things are similar or different make; build; put together items or arguments show how things are different or opposite draw conclusions, deduce show by example provide characteristics and features provide steps for an experiment or procedure identify issues and provide points for and/or against recognise as being distinct or different from; note differences between make a judgement based on criteria; determine the value of inquire into relate cause and effect; make the relationships between things evident; provide the why and/or how collect items from different sources Recall Recommend Record Research Select Specify State Summarise Use Present Produce Propose Predict Identify Investigate Justify List Modify Outline recognise and name plan, inquire into and draw conclusions support an argument or conclusion write down phrases only without further explanation change in form or amount in some way sketch in general terms; indicate the main features of suggest what may happen based on available information provide information for consideration provide put forward (e.g. a point of view, idea, argument, suggestion) for consideration or action present remembered ideas, facts or experiences provide reasons in favour of store information and observations for later investigate through literature or practical investigation choose one or more items, features, objects state in detail provide information without further explanation express concisely the relevant details employ for some purpose
viii
A fully mapped and detailed correlation of the stage 4 curriculum outcomes is available in the Science Focus 1 Teacher Resource Pack.
outcomes
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27
1 23456789
Solids, Liquids and Gasses Mixtures and their Separation Cells Heat, Light Classification and Sound Forces Earth and Space
Note:
indicates the Key Prescribed Focus Area covered in each chapter. Chapters may also include information on other Prescribed Focus Areas..
Being a scientist
Key focus area:
>>>
By the end of this chapter you should be able to: identify pieces of equipment commonly used in science use equipment to safely and efficiently perform simple tasks collect and record data and display it in tables, graphs and diagrams with the correct units follow procedures and write reports for simple experiments describe ways to reduce the risk of accidents while working in a laboratory.
1.1
context
In science you will need to deal with many potential dangers. You will work with intense heat, acids and other corrosive substances. It is particularly dangerous if any chemicals get splashed into your eyes. Other chemicals are poisonous and can make you extremely ill or can kill. Broken glass and equipment pose the risk of cutting you or of fragments entering the eye if they shatter. Before we can start any science we must agree on a set of laboratory safety rules. These rules will assist us in reducing any dangers.
The figure below shows some situations where students are doing something potentially dangerous. Can you identify the dangers? What rules would you make to prevent these dangers happening?
UNIT
Fig 1.1.1
Whats wrong?
In the figure below, the students are doing the right thing. Can you identify what they are doing right?
Whats right?
Fig 1.1.2
When working in a science laboratory always look for unsafe activities and report these immediately to your teacher.
Safetybefore we start
>>>
UNIT
1.1
[ Questions ]
Skills
9 Without using any words, design a simple two-colour sign to tell people that: a there is a slippery surface ahead b crocodiles are in the waterways c you should not eat centipedes d earmuffs must be used in this area e fruit is good for you 10 Design a series of simple signs to inform students of the science safety rules. The signs must be in two colours only and use only a few words.
Checkpoint
1 Copy the following into your workbook. Modify any incorrect statements so they become true. a It is OK to pour all substances down the sink after an experiment. b Running and pushing people in the laboratory is never allowed. c It is OK to eat and drink in the laboratory. d Spilt chemicals can be left unattended. e The teacher must always be told if something goes wrong. f All solid objects should be put in the bin and not down the sink. g Safety glasses are optional when we use chemicals in the laboratory. h Chemicals should never be tasted or smelled. i To investigate a reaction in a test tube, look straight down the tube. j Always point test tubes away from yourself and others. k It is good science to mix unknown chemicals together. 2 Describe four dangers that you might have to deal with in a science laboratory.
[ Extension ]
Skills
1 Construct a time line showing the dates for the invention of the following: a steam locomotive b aeroplane c jet aircraft d refrigerator e telephone f television g electric light bulb h telegraph i X-ray machine j satellite k computer l personal computer m record player or phonograph n CD player o VCR p DVD player q laser
Think
3 Compare the dangers that appear in science with the dangers that appear in other subjects such as: a design and technology b food technology c PDHPE 4 Explain why safety rules in science might be different to the rules in other classes. 5 Identify five injuries that can happen in a science laboratory if simple safety rules are not obeyed. 6 Suggest a way of reducing the risk of those injuries occurring. 7 Eye injuries are common in science laboratories. Describe two ways that eye injuries could occur and suggest how to minimise the risk of these injuries. 8 Make a list of ten safety DOs and ten DONTs in the laboratory.
Investigate
2 Find and draw the symbols commonly used to label these types of chemicals: a flammable b corrosive c explosive
>>
3 Define these terms: a toxic b spontaneous combustion c caustic d flammable 4 Draw what you think would be good symbols for the terms used in question 3. 5 Find and draw the signs commonly used for the following: a an information sign showing that this is a wheelchair toilet b a warning sign that eye protection should be worn 6 What do you think these signs or labels mean?
7 Select two scientists from the table, one from each group. a Describe his or her work. b Explain why the scientists work was an important development for science or society in general. c Identify dates that were important in the scientists life. Record reasons why these dates were important. d Present your information as either a poster, a Powerpoint presentation or a diary as if written by the scientist.
Group A International
Marie Curie Galileo Galilei Robert Gallo Stephen Hawking
Group B Australian
Karl Kruszelnicki William Bragg Frank Macfarlane Burnet John Cornforth Peter Doherty Howard Florey Fred Hollows Mark Oliphant Andy Thomas Sister Elizabeth Kenny Barry Marshall Tim Flannery Sir Gustav Nossal David Unaipon
Alfred Nobel Rosalind Franklin Isaac Newton William Herschel Luc Montagnier Charles Darwin Albert Einstein
Fig 1.1.3
UNIT
1.1
1. 2
context
Scientists ask questions about how the physical and living world around us works. These might be: Why does water turn white when it goes down a waterfall? How do ants breathe? How are rainbows formed? What affects the rate at which fruit rots? Why are sunsets red? Why are dead cockroaches always on their back?
Physics Biology Chemistry Geology
UNIT
>>>
Scienceasking questions
The answers to these questions could be found in textbooks, encyclopaedias or on the Internet. Sometimes the questions that scientists ask have never been asked before and that is when scientists need to find the answers themselves by performing experiments. An experiment is simply a test on a small part of the The branches of science world. Science covers many areas. So many in fact that it is often Scientists need to be easier to split science into able to use all of their five branches or disciplines. Some of senses to make correct the important branches are observations. illustrated in Figure 1.2.1. Physics asks questions about how The main sense a and why things move and the scientist uses is sight. forces and energy involved. They will also use Biology is a branch that asks hearing, smell, taste about living things. Chemistry investigates materials, and touch, although chemicals and chemical reactions sometimes it will be far and how they can be used. too dangerous to use Geology studies rocks, the some of these. Tasting is Earth, earthquakes, volcanoes particularly dangerous and fossils. Astronomy asks about the planets, in science. stars and the universe. In a way, a scientist Ecology studies how living things is like a detective trying affect each other and the environment in which they live. to solve a puzzling case.
Astronomy
Ecology
Fig 1.2.1
Clues must be gathered through careful observation of all the evidence. The various clues can then be linked together until a conclusion can be drawn about the case. In science we dont always get it right the first timesometimes more experiments and Prac 1 p. 8 observations are required.
UNIT
1. 2
Think
[ Questions ]
4 Identify which branch or discipline of science these scientists would be working in: a Johanna is studying the eating habits of a cheetah. b Yianni is developing a new plastic. c Josh is measuring the growth rate of an apple tree. d Brigid is studying the movement of the planets. e Lauren is studying the crystals embedded in a rock. 5 Scientia is the Latin word for knowledge. Describe the sort of knowledge that scientists research.
Checkpoint
1 Identify and name the five senses that we can use to make observations. 2 List four of the main branches of science.
3 We can use all our senses to make observations but sometimes it is too dangerous to use some of them. Complete the table below.
Experiment
Testing the ability of strong acids to clean a sheet of metal Testing how long milk takes to go off Testing how long it takes for six tomatoes to ripen Studying lava flowing from a volcano Testing a new pesticide
[ Extension ]
Create
1 Design a game suitable for primary students to teach them about the branches of science. 2 Create a website that explains the branches of science. Hyperlink the main and sub-branches to show the relationship between different areas of science.
5 Scientists use a lot of abbreviations. Identify what the following abbreviations stand for. a mL f HIV+ b CSIRO g mm c HAZCHEM h NASA d kg i UNESCO e j
Action
6 Interview 20 people to find out what they know about the branches of science. To do this: a Prepare a list of six questions to ask your subjects. b Present the information collected in the form of a table.
Investigate
3 Research what these sub-branches of science study. a botany b microbiology c palaeontology d acoustics e seismology 4 Identify whether these sub-branches of science belong in physics, chemistry, biology, geology or ecology. a optics: the study of light b entomology: the study of insects c vulcanology: the study of volcanoes d zoology: the study of animals
Surf
7 Find out more about the branches of science by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 1 and clicking on the destinations button.
UNIT
1.2
What is science?
>>>
[ Practical activity ]
UNIT
1. 2
Prac 1 Unit 1.2
Questions
1 State what you want to know about the case. Scientists call this the aim. 2 List the observations you have made. 3 Identify the suspects in this case. 4 Explain what evidence there is to link them to the crime scene. 5 In conclusion, identify: a who you think stole the sausages b who or what broke the window c when it probably happened d who or what broke the vase e the order it all happened in. In the above case, you have used many of the skills a scientist needs. To have successfully solved the case you needed to: be clear about what you were trying to find out make an educated guess of what you hoped to find out make careful observations of what happened take careful measurements if possible infer reasons about why the investigation went as it did draw logical conclusions about what was found out.
The clues!
Fig 1.2.2
1. 3
context
Every one of us is a scientist already, since we are constantly observing and interacting with the world around us. To be a good scientist we must use these observations to think about what is happening.
logical and based on the observations made in your earlier experiments. You make observations, inferences and predictions every day, probably without knowing it: Observation: Inference: Prediction: The dog barked. That possum is back again. The barking will frighten it away.
UNIT
Observationsqualitative vs quantative
Scientists make two types of observations. Sometimes observations are qualitative, being written down in words only. Qualitative observations would be made about the noise a bird makes, the taste of ice-cream or the fact that bubbles appear when the top of a soft drink bottle is unscrewed. Other observations are quantitative. These observations involve measurements and are stated as numbers. Examples are the temperature of a room recorded as 25C, the time being 12.45 pm or the volume of a liquid in a Prac 1 can of Coke being measured as 375 mL.
p. 11
Sometimes the same observation can lead to different inferences and predictions: Observation: Inference: Prediction: or: Observation: Inference: Prediction: The leaves are turning brown. The tree is dying. I will have to get a new one. The leaves are turning brown. It is a deciduous tree that loses its leaves in autumn. It will get new leaves in spring.
UNIT
1. 3
[ Questions ]
Checkpoint
1 Copy the following into your workbook and modify any incorrect statements so they become true. a A qualitative observation is one where numbers are involved. b If we use a thermometer, we are making qualitative observations. c The colour of a leaf is an example of a quantitative measurement.
Think
3 Label each sentence below as an observation, inference or prediction. a The missing fish were eaten by the cat. There will be no fish left in the pond after a while. The cat is on the edge of the fishpond. b One Olympian is bigger than the other. The bigger Olympian will win the event. One can lift a heavier weight than the other can.
>> 9
Observing
c The fish will be a big one. Ive caught a fish. The line is taut and the fishing rod is bending. Fig 1.3.1
>>>
6 While in hospital, Jill made some inferences and predictions about the experiment. Identify which are inferences and which are predictions. a A chemical reaction happened between the copper and the acid. b The dissolved copper turned the liquid green. c The reaction caused the brown gas. d A different acid might not produce brown gas. e A different metal might not dissolve. f Brown gas makes people pass out. g More copper would have made more brown gas. h Stronger acid would give us more brown gas. 7 Without looking up from this page: a Identify how many separate windowpanes there are in this room. b Describe the colour of your parents eyes. c Describe the colour and type of shoes your teacher is wearing today. d Accurately draw the Australian flag. e Identify how many kangaroos there are on the $1 coin. f Draw a map showing how to get from the laboratory to your locker. 8 Below is a drawing of fossilised dinosaur footprints. Describe any observations that can be made about: a the size of each footprint b the spacing of the footprints Fig 1.3.3
4 The gas we breathe out contains carbon dioxide. Identify this statement as an observation or prediction.
Analyse
5 Jill is doing the wrong thing in the diagram below. Before Jill passed out, she wrote down everything that she saw, heard and smelt in this experiment. Describe any observations that Jill would have made.
copper
acid
9 State inferences that can be made about: a the number of creatures present b the speeds of the creatures
Fig 1.3.2
10
One scientist inferred that the larger dinosaur chased and ate the smaller one. 10 Identify where on the diagram you think: a the large dinosaur entered the picture b the small dinosaur began to run c the larger dinosaur caught the smaller one d the larger dinosaur first saw the smaller one e the smaller dinosaur realised it was being hunted 11 State an inference about whether the larger dinosaur was carnivorous (meat eating) or herbivorous (plant eating). 12 Are you sure which dinosaur was the largest? Have you made an observation or inference here? 13 Describe what you think happened to the dinosaur with the smallest feet. Is this an observation or an inference? 14 Infer what else could have happened to this dinosaur.
[ Extension ]
Investigate
1 At home (or out of class), write a description of your teacher with sufficient detail to allow another person to identify them in a line-up. Include the clothes they were wearing when you last saw them. 2 Go outside and feel the weather. Write a description of what it is like without using any of the words normally used to describe weather, like rain, wind, temperature etc.
UNIT
1.3
Prac 1 Unit 1.3
[ Practical activity ]
The burning question!
Aim To observe a burning candle Equipment
A candle, gas jar or beaker, metal or plastic lid or petri dish, matches, access to electronic scales
Method
1 Melt a little of the wax at the bottom of the candle and use it to stick the candle to the lid or petri dish. 2 Weigh the candle and lid or dish on the electronic scales. Record your result. 3 Light the candle. 4 Use all your senses (except taste) to write as many observations as you can. (Michael Faraday, the nineteenth-century scientist, made 53!) 5 Now cover the candle with a gas jar or beaker. 6 Record more observations. 7 Weigh the candle and lid again.
Questions
1 How many different observations did you make? For each observation, state whether it was qualitative or quantitative. 2 Compare the two weights. If they were different, explain why.
Fig 1.3.4
11
UNIT
1.3
1. 4
context
When we do a job we usually use equipment to make the job easier. It is the same in science. We use equipment to help us carry out experiments and to make more accurate observations. Some equipment is used to take accurate measurements in an experiment.
UNIT
>>>
Thermometers are used to measure temperature. Stopwatches and electronic timers are more accurate than normal watches and clocks, and can be used for better timing. Other equipment magnifies very small objects that might normally be difficult to measure. Microscopes magnify extremely small objects, while telescopes magnify objects that are far away. Microphones and electronic amplifiers allow us to hear sounds that can otherwise not be heard.
Scientific drawing
Diagrams of scientific equipment must be easy to draw and easy to read. You need not be an artist but you do need to follow conventions so that your
spatulas
thermometer
or to run experiments in
clamp
bosshead
safety glasses
clay triangle
Fig 1.4.1
Laboratory equipment
12
diagrams can be understood by another scientist. Scientists draw their equipment as a cross-section: they split the equipment down the middle. The drawings are simple lines and curves, normally without any shading or colouring. Figure 1.4.2 shows how scientists draw some of the most common equipment used Prac 1 in the laboratory. p. 14
Fig 1.4.2
Pyrex
Pyrex
UNIT
1. 4
[ Questions ]
filter paper and funnel test tube beaker conical flask
Checkpoint
1 Identify the glass-like substance from which many pieces of science laboratory equipment are made. (Hint: the name is often printed on the sides of beakers and flasks.) 2 Copy the following and modify any incorrect statements so they become true. a A clay triangle is used to hold a watch-glass over a Bunsen burner. b Beakers are used for accurate measurement of liquids. c Conical flasks are useful for chemical reactions. d Test tubes are used for heating small amounts of liquids. e Thermometers are used to stir liquids.
Think
3 Identify a piece of equipment that you would use to: a measure the temperature of boiling water b measure out exactly 55 mL of salt water c support a thermometer in a beaker d transfer a small amount of solid onto a balance e pour a liquid into a conical flask 4 Identify a piece of equipment that you would need to make a good set of observations in the following: a A plant is to be grown from seed. b Yeast releases a lot of heat when it is used in the fermentation of grapes. c Germs are being studied in a hospital. d The planet Mars is to be studied. e The speed of an athlete in a 100 m sprint is to be studied. 5 Describe the similarities between: a a beaker and a flask b a beaker and a measuring cylinder c tongs, a peg and a clamp d a clay triangle and a gauze mat e a test tube and an evaporating dish
6 Name a piece of equipment that would assist the following scientists in making their observations. a A microbiologist wants to study extremely small bacteria that have been causing infections. b A chemist is measuring the heat generated by a chemical reaction. c A physicist wants to accurately measure the time it takes for a stone to drop 2 m. d A botanist wants to measure the growth rate of a young tree. e An electrical engineer wants to measure the current flowing in an electrical circuit. f An astronomer wants to study the surface of the Moon. 7 State where the following special safety equipment is located in your school laboratory. a fire blanket b fire extinguishers (is there more than one type?) c gas control switch d electrical master switch e eyewash f broken glass container g bucket (maybe with sand or another chemical to soak up spills) h first aid cabinet i warning and safety signs
Skills
8 Draw a diagram representing a: a beaker b conical flask c test tube
>> 13
UNIT
1. 4
Equipment
>>>
[ Extension ]
Investigate
main gas tap sink fire extinguisher bucket of sand
9 Draw a plan or birds-eye view of the laboratory you are in, showing the location of all the special safety equipment. An example is shown in Figure 1.4.3.
1 Research what these pieces of equipment look like and how they are used. Draw a scientific diagram of each. a pipette f Geiger counter b burette g vernier calliper c micrometer h barometer d mortar and pestle i sphygmomanometer e ammeter and j thermistor and voltmeter thermocouple 2 Ask your teacher for a scientific supply catalogue. a Draw four pieces of equipment that are not commonly used in the school laboratory. b Describe the use of each piece of equipment in part a.
teachers bench
Action
first aid cabinet
Fig 1.4.3
3 Visit a pharmacy and ask the chemist what equipment they use to make their preparations. Compare the equipment the chemist uses to what is available in the school laboratory.
Create
4 Use animation software to animate different pieces of laboratory equipment showing how they are used.
UNIT
1. 4
Prac 1 Unit 1.4
[ Practical activity ]
What is it?
Aim To draw, classify and name common laboratory equipment Equipment
A range of scientific equipment
Measuring equipment Pouring equipment Storage equipment Equipment to run chemical reactions in
Method
1 Divide a new page in your science workbook into a table with eight sections, as shown opposite. 2 Every piece of equipment you have been provided with must be drawn under one of the headings. Draw each piece: a as realistically as you can b in the proper scientific way Write the name of each piece of equipment under the diagram.
Safety equipment Holding equipment Cleaning equipment Mixing equipment
14
1. 5
context
Scientists need to record their information accurately so that others can repeat their experiments. To do this, they write a scientific report. A report is not a story and it is not a set of instructions. It tells the reader what happened.
Headings and units (for example g, kg and t) are necessary.
UNIT
Discussion or analysis
This is where scientists discuss: any problems encountered in the experiment and what was done to overcome those problems what you think your results show about the experiment what you have found about the experiment from other sources such as textbooks, the Internet or encyclopaedias. It can also include: graphs ideas for further experiments.
A report should contain subheadings for the following sections: aim hypothesis (optional) equipment or materials method results and observations discussion or analysis conclusion.
Aim
This is what you intended to do in the experiment.
Conclusion
This is where scientists summarise what they have found out in the experiment. The conclusion should be short and must relate to the aim.
Hypothesis (optional)
Scientists always have an idea of what they think may happen or what they might find out in an experiment. Their educated guess is called a hypothesis.
Prac 1 p. 17
Equipment or materials
All important equipment and chemicals needed in the experiment must be included. The sizes of the various pieces of equipment must also be included.
UNIT
1. 5
[ Questions ]
Checkpoint
1 In your own words, describe what is meant by the term aim. 2 Explain how a hypothesis is different to an inference. 3 State the meaning of the word tabulated. 4 Identify two things that must always be included in result tables. 5 State two things that graphs must have on their axes.
Method
This is a detailed list of what was done in the experiment. To allow another scientist to be able to repeat the experiment, you must include what quantities were used and the exact order in which the experiment was performed. A diagram of the experiment (with all the equipment connected, not separate) can be very useful.
>>
15
Reporting
>>>
Date?
Apparatus? Materials?
No label What weights? What length? Spacings should be equal, and increase by the same amount
Units changed
Tonys report
Fig 1.5.1
Analyse
Tony wrote the above report on an experiment he ran on the flexibility and stretch of a fishing line. 6 Describe Tonys conclusion. 7 Identify which section in Tonys report on the flexibility of fishing line is missing. 8 Tonys hypothesis was excellent. Explain why. 9 In the report the reader needs to guess some things if they are to repeat the experiment. List the things that the reader may need to guess in order to do the experiment. 10 Describe two things that need to be added to Tonys results table. 11 State one thing that needs to be added to the graph in the report. 12 Explain whether the aim and the conclusion match. 13 Propose a better conclusion for this experiment. 14 For the detective investigation in Unit 1.2, state: a the aim c your results or observations b your hypothesis d your conclusion
16
[ Extension ]
1 Design and carry out an experiment to see what type of soap solutions make the biggest soap bubbles. Use the headings of aim, hypothesis, method, results and conclusion in your report. Identify the variables that you are using and explain how you control them.
DYO
4 Estimate the area covered by the drop by counting the squares on the graph paper underneath. Count half-covered squares as full and less than half-covered as empty. 5 Add another drop of water, being careful to keep it the same size, and estimate the area covered. 6 Repeat for three drops. 7 Predict the size for 4, 5 and 6 drops. 8 Check your predictions by counting the squares for 4, 5 and then 6 drops on the slide.
UNIT
1. 5
Prac 1 Unit 1.5
[ Practical activity ]
Spreading puddles
Aim To measure the area of water droplets Equipment
Glass microscope slide, eyedropper, graph paper
Questions
1 Compare the actual area to your predicted area and comment on your prediction. 2 Describe any pattern you see connecting the number of drops with the area covered. 3 Predict the size for 7, 8, 9 and 10 drops. 4 Present your results as a line graph, with area on the vertical axis and the number of drops on the horizontal axis.
Method
1 Construct the table below in your workbook.
Number of drops
Predicted area (squares) Actual area Area (squares) 100 80 60 40 20
9 10
2 Collect a clean glass slide, an eyedropper and a piece of graph paper and place the graph paper under the slide. 3 Drop one drop of water onto the slide.
How big is the drop?
Fig 1.5.2
4 5 6 7 Number of drops
10
eyedropper
graph paper
17
UNIT
1.5
1. 6
context
Measurements are extremely important in science. They improve the accuracy of our observations and allow us to see any patterns that may exist.
UNIT
>>>
Whoops!
In 1999 NASA sent three space probes to land on and explore the surface of Mars. All three failed. One is thought to have failed because NASA scientists did not write the units down for a series of measurements. One group of scientists thought the measurements were in older imperial units, while another group thought they were metric. This caused the calculated altitude of the spacecraft to be below ground level, so the spacecraft crashed into the surface!
Scientists use units from the metric system for their measurements. Grams are used for measurements of small masses, like the mass of a coin or a mouse. Kilograms or tonnes are used for heavier objects. Centimetres, metres and kilometres are used for length, and seconds, minutes and hours for time.
Worksheet 1.3 Observing and measuring Worksheet 1.4 Metric units of measurement
Measurement
Length, height and distance Mass (sometimes incorrectly called weight) Time Speed Volume of a liquid Temperature
Abbreviations
mm, cm, m, km mg, g, kg, t s, min, h km/h (sometimes shown on roadsigns as kph), m/s mL, L, ML C, K
Fig 1.6.1
18
70 mL 30C 65
70 mL
65
60 20C 55
60
55
50 10C
reading = 67 mL
50
reading = 66 mL
The meniscus in a measuring cylinderfor water the meniscus curves up at the edges, and for mercury it curves down at the edges.
Curvy water
Liquids in narrow tubes such as measuring cylinders often have a curve at their surface. This curve is called a meniscus and it gives us a problem when we need to measure the volume. Measure from the bottom of the meniscus if it curves downwards. Measure from the top of the meniscus if it curves upward.
Prac 1 p. 22
Another important error is caused by not having your eye directly in line with the measurement. This is called parallax error.
Parallax errorwho is reading it correctly, A, B or C?
B C
Fig 1.6.3
10
15
20
25
30
35
To minimise errors, scientists need to follow these rules or conventions: Always read measuring devices from directly in front. Always check that the measuring device has the correct starting point, such as zero. Always write down measurements as soon as they are taken. Do not try to remember measurements. Always write down the units of the measurements. Always use correct abbreviations for units. If possible, write all measurements in a table. Do not use fractions such as 1/2 or 1/4 in measurements. Use decimals instead. For example, 9.5 kg is acceptable, 91/2 kg is not. If you are working in a group, always make sure you have a copy of the results before you leave the laboratory. Always measure quantities in metric Prac 2 p. 23 units.
A common problem when using measuring devices is called zero error. This is when the device reads some value even though nothing is being measured. An example is a weighing scale that measures 0.12 kg when nothing is on it.
19
UNIT
1.6
Measurement
>>>
Fig 1.6.7
An electronic balance
100
200
300
400
500
600
10
20
30
40
50
60
70
80
90
100
10
Fig 1.6.5
A laboratory beam balance is used for measuring mass. A beam balance reading 200 + 70 + 3.5 = 273.5 g
Fig 1.6.6
100
200
300
400
500
600
10
20
30
40
50
60
70
80
90
100
10
UNIT
1. 6
[ Questions ]
Mass is usually measured in the laboratory in grams, abbreviated as g, or kilograms (kg). For increased accuracy an electronic balance is sometimes used.
Prac 3 p. 23
Checkpoint
1 Copy the following, and modify any incorrect statements so they become true. a Metric units are never used by scientists for measurements. b The kilometre is an example of an imperial unit. c Seconds could be used to measure the distance a sprinter runs. d There is 375 ML in a normal soft drink can (be careful). e Mistakes are the same as errors.
2 Draw a picture or cartoon showing each of the rules for taking measurements. 3 State a reason for each of the above rules for taking measurements. 4 State the correct metric unit for mass. 5 State two important types of errors. Give examples of each.
20
Think
6 Select a unit of measurement and a device that you would use to measure the following quantities. a b c d e the temperature of a fishpond the height of a person the length of a bull ant the mass of a teaspoon of sugar the volume of a glass of orange juice
14 Read these measuring devices and state their measurements. Fig 1.6.9
a
40
7 6 5
c
300
d
30
30
4 3
200
20
7 Identify what is wrong with these measurements. a Mass of a mouse = 15014 g b The car was travelling at 100. c The wind speed was 10 miles per hour. d A full bottle of soft drink contained 1.25 mL. e Evans height = 168 m. 8 Natalie took note of the speedometer reading every 5 seconds as her mums car accelerated. At the start, the speed was 0 km/h. The speed was 20 km/h after 5 seconds, then 30, 50, 60 and 80 km/h every 5 seconds after. Collate these results into a table. 9 Identify which of the abbreviations are correct for each measurement unit. a gram: gm gms G g b kilogram: kilo kg Kg KG c millimetre: mms mm Mm mL d litre: lt mL lit L e kilometres per hour: kph km/h km/hr kil/h f minutes: min m mins ms g degrees Celsius: deg C deg C C h hour: hr h Hr H I seconds: sec secs S s 10 Sometimes people use an incorrect term for mass. Name this incorrect term. 11 Describe what will happen to the needle of a beam balance if too much sliding mass is added. 12 Describe the difference between an error and a mistake.
20
100
10
100
200
300
400
500
600
10
20
30
40
50
60
70
80
90
100
10
100
200
300
400
500
600
10
20
30
40
50
60
70
80
90
100
10
g
45
60 15
h
100 200
0 30
300
16
17
18
k
0 100 200 300 400
500
l
20 10 0
55 0 50
10
Skills
13 Robs poorly recorded results for an experiment are shown here. Draw up a table and present the results as they should look.
Fig 1.6.8
45 15 40 20 35 30 25
21
UNIT
1.6
Measurement
>>>
[ Extension ]
Investigate
1 Identify whether NASA made an error or a mistake in its failed 1999 missions to Mars. Explain your reasoning. 2 Fred measured the mass of some substances that could not be held in the pan of a beam balance. He needed to put the substances in containers instead. Complete the table of his results.
Action
3 Describe how you would find out each of the following. Then use your method to measure them. a the mass of a Smartie or an M&M without using any weighing device b the thickness of a piece of A4 paper with a normal ruler DYO c the number of your heartbeats in a minute
Mass of container
1.2 g 13.7 g
Mass of substance
UNIT
1. 6
Prac 1 Unit 1.6
[ Practical activities ]
Taking measurements
Aim To measure various items with a range of measuring devices Equipment
Access to a range of instruments and pieces of equipment that all show different quantities.
Questions
1 Compare all the results on the paper from each group and state any differences. 2 If you got all different measurements, does this means that everyone is wrong? 3 Identify any results that were significantly different from the rest. 4 State a conclusion for this experiment. 5 Suggest reasons why scientists may not get exactly the same results.
Method
1 Construct a table similar to the one below, in your workbook. 2 Write your measurement in your table and on a piece of paper next to each piece of equipment.
My measurement
Unit it is measured in
22
How massive?
Prac 2 Unit 1.6
Aim To correctly use a beam balance to find the mass of various objects Equipment
Access to beam balances and objects to weigh, 50g mass
5 Repeat this step for all the sliding masses until you finish with the lightest sliding mass. 6 When you have successfully got the pointer at 0, record the measurement in your table and on the paper next to each balance.
Method
1 Construct a table in your workbook with the headings Object being weighed, Mass and Units. 2 At each balance, move all the sliding masses to 0. 3 The arm should now be balanced and reading 0. If this does not happen, adjust the balance screw on the edge of the arm. 4 Add the object to be measured and slide the heaviest sliding mass until the arm drops below 0. Then pull the sliding mass back one notch.
Questions
1 State the reading that should be on a beam balance when nothing is in its pan. 2 State the mass that you obtained for the 50 g standard mass. 3 Explain why a 50 g standard mass might not be exactly 50 g in an experiment. 4 Describe three errors that might be present in these measurements.
0.7 0.6 0.5 Mass (g) 0.4 0.3 0.2 0.1 0 10 20 30 40 50 Length (mm) 60
Equipment
4 lengths of uncooked spaghetti, beam balance, ruler with 1 mm markings
Method
1 Break three lengths of spaghetti each into three pieces of different sizes, so that you end up with nine different lengths. 2 Construct a table in your workbook or set up a spreadsheet with the headings Length and Mass. 3 Measure the length and mass of each piece of spaghetti and record it in your table. 4 Use this information to draw a line graph and draw a line of best fit through your points or generate the graph using your spreadsheet. 5 On your graph mark a length that you did not measure. 6 Use the graph to estimate its mass. 7 Get another length of spaghetti and break it at the length you chose in step 5. 8 Measure and record the mass of the spaghetti you used in step 7.
Fig 1.6.10
Questions
1 Explain what a line of best fit is. 2 For steps 58, compare your predicted value with the actual value. 3 State a conclusion about the link between mass and length of spaghetti.
23
UNIT
1.6
1.7
context
The work of scientists rarely starts with an experiment but normally with observations made in everyday life or even possibly by accident. Their observations lead them to ask questions like What caused that? or Why did that happen?. They then design experiments to answer their questions.
only change one factor at a time. These factors are called variables and are anything that may affect an experiment.
Joe thought about it carefully and came up with a list of factors that could affect the amount of froth produced: the amount of detergent used the amount of water in the sink the speed of the water coming from the tap the temperature of the water. These were his variables. Joe noticed that when he washed dishes he sometimes made lots of froth and at other times made almost none. Joe has a problem. Lets see how he solves it scientifically.
UNIT
>>>
From their observations, scientists can then make a hypothesis. This is a prediction or educated guess about what they may find in an experiment or what might have caused the observations.
Prac 1 p. 26
Joe had noticed that more froth was produced when faster tap water was added and when more detergent was used. He thought that these variables would have a great effect but didnt think the temperature of the water in the sink would have any effect at all. This was his hypothesis.
Scientists only change one factor or variable at a time. Otherwise they would not be able to work out which variable caused the effect. All the other variables must be kept exactly the same or constant.
Joe then designed and ran two experiments that he thought could solve his problem:
Fig 1.7.1
Be fair!
Things happen due to lots of different factors. But which factor has the biggest effect and which ones dont have any effect at all? Any test that a scientist carries out must be a fair one. To be fair, we need to
Experiment 1: He put 3 drops of detergent in the sink each time. He ran hot water in very slowly at first, then repeated with hot but faster water. He repeated the experiment with very fast but equally hot water. Each time he filled the sink half-way. Experiment 2: He put 1 drop of detergent in the sink and turned the tap on high until the sink was half full. He then repeated the experiment with 2 drops of detergent, then 3 then 4.
24
To make sure you design an effective experiment you should know: the problem you are trying to solve (the aim) exactly what you are going to measure what you are going to change what you are going to keep the same anything else that might affect the experiment but you cannot control, Prac 2 p. 26 eg air pressure.
Skills
10 For both of Joes experiments: a State an aim. b List a detailed method using numbers to set the order. c Construct a results table. 11 Joe then wanted to test whether the temperature of the water had any effect on the froth. For this new experiment: a State Joes aim. b State a list of equipment he would need. c List a detailed method. d Construct a results table he could use.
UNIT
1. 7
[ Questions ]
Checkpoint
1 State five points that you should know for an effective experiment. State an example of each point. 2 Explain what is meant by the term variable. 3 Explain why only one variable should be changed at a time.
[ Extension ]
Investigate
1 Nikki liked sweet coffee so she always added lots of sugar. She often noticed, however, that a lot of it remained undissolved at the bottom of the cup. a Describe three variables that you think would affect the amount of sugar dissolved in a cup of coffee. b List the variables in order from the most important to the least important. c Choose one important variable and describe a method to test it. 2 George heard an old tale that if you want an avocado to ripen quickly, you should place it in a brown paper bag with a banana! He thought this sounded weird and wanted to see if it was true. Describe in detail how he could test whether the tale was true or not. You may like to perform this experiment to see if your method works.
Think
4 List some variables that may affect: a the number of visitors to a swimming pool b the growth of a plant c the time taken to cook a potato d the number of times you go to the toilet in a day e how long a detention a student receives f your test results for this topic
Analyse
5 List Joes four variables in the above experiment. 6 Identify the variable that Joe didnt think was important. 7 List other variables that Joe didnt identify. 8 Explain whether any of the variables that you listed in question 7 might be important to the experiment. 9 Describe a method that Joe could use to measure the froth of the detergent.
25
UNIT
1.7
>>>
UNIT
1. 7
Prac 1 Unit 1.7
[ Practical activities ]
Froth production
Aim To interpret another students experiment and correctly write a report Equipment
Dishwashing detergent with dropper, ruler, access to tap, large beaker/bucket/ice-cream container, thermometer PART 2 1 Test one of the variables that Joe did not test. 2 Once again, write up the experiment.
DYO
Questions
1 State the variables that Joe tested. 2 Explain why Joe kept the variables the same in both experiments. 3 List three other variables that could have been tested. 4 Describe which variable you think would have the most effect.
Method
PART 1 1 Repeat one of Joes experiments. 2 Write up the experiment, following the rules for writing a report.
During the Easter holidays, Clare noticed that when you drop a ball it never bounces back to the height you dropped it from.
Why didnt the ball come back as high?
DYO
Fig 1.7.2
Method
1 Identify all the variables that you think will have some effect on the bounce. 2 Decide which variable you are going to keep the same. 3 Describe, in as much detail as you can, an experiment that would test Clares sisters statement. You will need to collect at least five different measurements. 4 Perform the experiment. 5 Construct a table for your results. 6 Make suggestions on how you could improve your experiments.
Questions
1 Identify which variables: a affected the bounce height b did not significantly affect the bounce height 2 State two conditions that would combine to produce: a a high bounce b a low bounce
Clare asked her sister about this and she replied, The ball never gets back as high because it loses some energy. Whats more, once you get to a certain height of drop it never bounces any higher. Clare decided to test her sisters hypothesis.
26
1. 8
context
One of the most important and dangerous pieces of equipment you will use in the laboratory is the Bunsen burner. Its correct use is essential for your safety.
This flame has a blue colour and is sometimes difficult to see, but can be heard. At the very base of the flame, there is a small cone of unburnt gas. The hottest part of the flame is just above this cone.
The Bunsen burner flame
Prac 2 p. 30
UNIT
Fig 1.8.2
gas hose
collar
base
People in science
Fig 1.8.1
A Bunsen burner
The collar controls the amount of air that enters the burner and controls the heat and colour of the flame. Prac 1 p. 29 It is very important that before lighting the Bunsen burner the collar is turned so that the air hole is shut. This causes very little air to mix with the gas, and so the gas does not burn well. It produces an easily visible, pale-yellow flame that is relatively cool. It is also a dirty flame because it leaves a layer of carbon on anything that is heated in it. This flame is called the safety flame because it is the coolest flame and is the easiest to see. If the collar is turned so that the air hole is open, a lot of air will enter. The gas will burn efficiently with no smoke and will be extremely hot (about 1500C).
27
Using a Bunsen burner Other equipment often used with a Bunsen burner
Prac 4 p. 32
>>>
Fig 1.8.3
evaporating dish
clay triangle Bunsen burner tripod and gauze mat retort stand, bosshead and clamp
bench mat
UNIT
1. 8
[ Questions ]
b a hissing sound is heard coming from a Bunsen burner that is not lit c you need to leave a Bunsen burner to collect some extra equipment
Checkpoint
1 Sketch a labelled diagram of a Bunsen burner. 2 Describe how hot the blue Bunsen burner flame is. 3 Copy the following, and modify any incorrect statements so they become true: a The blue flame of a Bunsen burner is called the safety flame. b Yellow flames are dirty flames. c The yellow flame is the hottest flame of the Bunsen burner. d The tip of the blue cone is the coolest part of the Bunsen burner flame. e There is no flame at the very top of the barrel. 4 Describe what you should do if: a you smell gas in the laboratory
Think
5 Explain why the gas should be turned on after the match is lit. 6 Explain why you should not use a piece of burning paper to light a Bunsen burner. 7 Identify which flame is the hottest and how it is achieved. 8 Identify which flame is called the safety flame, giving reasons for your answer. 9 Explain the purpose of the airhole in a Bunsen burner.
>>
28
10 Explain why the rubber gas hose should be as flat as possible on the bench. 11 Explain why the blue flame is noisier than the yellow. 12 Identify one thing that each of these students is doing wrong. Fig 1.8.4
[ Extension ]
Investigate
1 Research some of the achievements of Robert Bunsen. 2 Explain what natural gas is and where it comes from. 3 Identify the red material at the tip of a match and why it burns so easily.
Surf
4 Find out more about Bunsen burners by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 1, and clicking on the destinations button.
13 List five safety rules that you should follow when using a Bunsen burner for heating.
UNIT
1. 8
Prac 1 Unit 1.8
[ Practical activities ]
Lighting a Bunsen burner
Aim To correctly and safely light a Bunsen
burner 7 Carefully draw and colour a diagram of the yellow flame, looking carefully to see if there is any change in colour from the base of the flame to the top. Turn the collar so that the air hole is now half-open. 8 Now open the air hole completely. 9 Once again, carefully draw a coloured diagram of the blue flame and note any other features.
Equipment
Bunsen burner, bench mat, matches, safety glasses
Method
1 Put on the safety glasses. 2 Place the burner on a bench mat. 3 Connect the rubber tube to the gas jet on your bench, making sure the tube is reasonably flat on the bench. 4 Turn the collar so that the air hole is closed. 5 Light a match. Never use other materials, such as burning pieces of paper, to light a Bunsen burner. 6 Turn on the gas. At the same time, place the flame of the match just near the top of the burner. The burner should now light. If you lit it correctly, the flame should be yellow.
Questions
1 State your observations about the flame when the air hole is half-open. 2 Identify the colour of the flame when the air hole is open completely. 3 Explain whether the air hole should be open or shut when lighting a Bunsen burner.
29
UNIT
1.8
>>>
PART 2: Matches that wont light!
Method
1 Set up the Bunsen burner. 2 Place a pin carefully straight through an unlit match, a little under its head. 3 Balance the pin on the top of the Bunsen burner so that the match head is in the centre of the barrel. 4 Light the burner as usual. 5 Quickly turn the collar so that you get a blue flame.
Method
1 Set up and light the Bunsen burner. 2 Set it to yellow. 3 With tongs, hold the gauze mat vertically in the flame so that it touches the top of the burner.
flame
Fig 1.8.5
safety match
Fig 1.8.6
The match head should be just above the top of the Bunsen burner
Questions
1 State whether your match lit up. 2 Predict the relative temperature of the flame at its centre. 3 Describe any observations you made about the pin, particularly at its edges. 4 Compare the heat at the centre with the heat at the edges of a Bunsen burner. 4 Now set the flame to blue and repeat the experiment. 5 Carefully draw diagrams of any heat markings that you see. PART 3: Dirty and clean
Questions
1 If the wire glows red, state your inference about the flame at that point. 2 Discuss whether the yellow flame is hot enough to make the gauze mat go red. 3 Describe the markings caused by the blue flame. 4 Sketch a diagram of a flame and label where the flame is hottest and where it is coolest.
Method
1 Hold a small piece of porcelain in a pair of tongs. 2 Hold the porcelain in a blue flame and record your observations. 3 Hold the porcelain in the yellow flame and record what you see. 4 Copy the table on page 31 into your workbook and then complete it.
>>
30
Colour of flame
Questions
1 Describe what happened to the porcelain in the yellow flame and the blue flame. 2 State which flame could be called dirty. 3 Identify whether the dirty flame was cool or hot.
Aim To accurately measure an amount of water and heat using different flames Equipment
Bunsen burner, bench mat, matches and safety glasses, tripod and gauze, 100 mL measuring cylinder, 250 mL beaker, stopwatch or clock with second markings
2 Accurately measure 80 mL of tap water using the measuring cylinder and pour it into a 250 mL beaker. 3 Time how long it takes for the water to boil when using a blue Bunsen burner flame. Boiling will be obvious when the water begins to bubble vigorously. 4 Repeat the experiment with a yellow flame only.
Questions
1 Redraw the equipment in the correct scientific way. 2 State how long it took for the beaker of water to boil in each case. 3 Identify in which case the beaker boiled first. 4 Identify the flame colour that was the hottest. 5 Explain how you can tell which flame is the hottest.
Method
1 Set up the equipment for boiling water as shown here.
bosshead clamp thermometer retort stand beaker gauze mat tripod Bunsen burner
6 Explain how you can control the heat and colour of a Bunsen burner flame. 7 Explain why it is important to use the same quantity of water in each part of the experiment.
box of matches
heat-proof mat
Fig 1.8.7
31
UNIT
1.8
>>>
Chapter review
[ Summary questions ]
1 Copy the following, and modify any incorrect statements so they become true: a Spatulas are used for stirring. b Goggles do not need to be worn when using chemicals. c Measuring cylinders are used to heat water in. d A gram is a unit used in the measurement of mass. e The air hole should always be shut when lighting a Bunsen burner. f The gas should always be turned on before the match is lit. g The air hole must be closed to produce the yellow flame. h Burning paper can be used to safely light a Bunsen burner. 2 Identify the branch or discipline of science in which these scientists would be working. a Amelia is calculating the fuel needed to launch a rocket. b Ying is looking down a microscope at a flu virus. c Olivia is watching ants at work. d Mike is developing a new plastic. 3 Scientists run experiments to obtain information. Apart from experiments, list other sources of information that scientists can use. 4 State four observations about: a orange juice b an ice cube c the paper you write on in your workbook d dirt 5 Name a piece of equipment would you use to: a measure out roughly 100 mL of water b heat a small amount of liquid c heat strongly a small amount of solid d find the mass of a small stone e find the boiling point of water 6 List what you need to include in a good experimental report. 7 State the metric units you could use for measurements of: a mass (sometimes incorrectly called weight) b time c length or distance d temperature e speed f volume of a liquid
Method
1 Adjust a Bunsen to get a blue flame. 2 Fill the test tube to about 1/3 the way with water. 3 With tongs, hold the test tube near its top. 4 Point the test tube away from people, including yourself. 5 Heat the tube carefully near the bottom. 6 Move the tube in and out of the flame until the water starts to bubble. 7 Put the hot test tube in the test tube rack. 8 Record your observations.
Fig 1.8.8
Heating a test tube move the test tube in and out of the flame.
Questions
1 Explain why pointing test tubes at people is dangerous. 2 Outline why test tubes must always be kept moving in a flame. 3 Explain why tongs need to be kept near the top of the test tube and not the bottom. 4 Explain why test tubes should never be laid flat on a bench.
32
8 Identify which unit you would select to measure the following quantities. a the volume of water in Sydney Harbour b the mass of a car c the length of a rat d the mass of a dog e the volume of water in a bathtub 9 List the four most important steps in lighting a Bunsen burner, in the correct order.
12 Compare the advantages and disadvantages of using a blue flame and a yellow flame on a Bunsen burner. 13 Draw and label the equipment that you would need: a to boil 200 mL of water b to boil 20 mL of water c to evaporate water from sea water 14 Graeme noticed that his heart was beating fast after a cross-country run. He wanted to know what happened to his heartbeat before, during and after exercise. Design an experiment to find whether the number of heartbeats increases when you exercise and what it does if exercise stops.
[ Thinking questions ]
10 How observant are you? From memory: a Draw the shape of STOP and GIVE WAY traffic signs. b State the maximum speed shown on your parents car speedometer. c Identify whether your earlobes hang or are attached. d Identify whether the person sitting next to you is right- or left-handed. e State the number of pages in this textbook. 11 Collate the following into observations, inferences and predictions. a Ive eaten something that was off. My stomach is not feeling well. Ill vomit soon. b The plant required sun and water to grow. The plant will grow and fruit. The seed has a small leaf shoot breaking it in two.
[ Interpreting questions ]
15 In the case of the missing sausages, each observation was important in solving the case. The detective needed to infer something from each. Complete this list of observations in the case and state the logical inference that could be made from each:
Observation a b c d e f g h i
Curtains were all messed up Stone on the table Next doors lawn was mowed Fritz was not hungry Blond hair on carpet Vase was broken
Inference
Thief is hungry
33
>>>
By the end of this chapter you should be able to: explain the similarities and differences between solids, liquids and gases using observations and the particle theory use correct terms to describe what happens when a substance changes state, and explain how energy is involved use the particle model to explain dissolving, diffusion and expansion use densities to predict whether solids will float or sink, and how gases and liquids will arrange when mixed.
2.1
context
You get up in the morning and have a hot shower. Outside there is a mist in the air and frost has made the grass icy. Someone puts the kettle on and steam sprays upwards as it boils. Ice, water and steam are substances that we see and use almost every day. Although they look and act completely differently from each other, they are just different forms of exactly the same thingwaterand contain exactly the same types of particleswater particles. Why then can you dive into a swimming pool but not into a big block of ice? Why is a steam burn more serious than one caused by boiling water? How can we explain this when we cannot see the individual particles of water? We use a model.
Fig 2.1.1
Liquid water and solid ice are really the same substance.
Models in science
We cannot see individual particles of water, but we do know how water (and ice and steam) behaves. In science, a model is an idea that explains certain behaviour. A model might not match exactly what is really going on, but it can be used to help us understand and predict what will happen in other situations, just like a model of a planned building or aircraft helps designers better understand the real thing. To better understand different forms of water and other substances, we use the particle model.
35
UNIT
UNIT
3.1
>>>
Viscosity and quicksand
Viscosity describes how easily a liquid flows. Water, which flows easily, has a low viscosity, while honey, which does not flow as easily, has a high viscosity. Quicksand is an unusual substance because its viscosity increases when you try to move it quickly, making it harder to move through. If you are ever unfortunate enough to fall into quicksand, try floating and move very slowly to save yourself.
solid
liquid
gas
Fig 2.1.2
Particles in solids, liquids and gases vibrate, but those in liquids and gases are able to change position.
Solids
In a solid, the particles are strongly bonded to each other. The particles in a solid move or vibrate, but not much when compared to liquids and gases. Solids have definite shape, do not flow, and are very difficult (virtually impossible) to compress. Solids do, however, have the potential to expand if heated but less than liquids and gases. The heat energy makes the particles Prac 1 p. 39 move or vibrate faster.
Fig 2.1.3
What do these objects have in common?
can flow to take the shape of the bottom of a container. Like solids, they are very difficult to compressthey are virtually incompressible.
What do these have in common?
Prac 2 p. 40
Fig 2.1.4
Liquids
The particles in a liquid are weakly bonded to each other, but it doesnt take much to break these bonds (which is just as well when you jump into a swimming pool). The particles in a liquid move around more than those in a solid. Liquids have no definite shape, but
Fig 2.1.5
36
Gases
There are no bonds between the particles in a gas. The particles in a gas have much more energy than those of a solid or liquid, and fly around, bouncing off each other. Gases have no fixed shape. Even a small amount of gas will spread (or diffuse) to completely fill a container. Unlike solids and liquids, gases are compressible. This is because gases have large amounts of space in between the particles. It is this property that makes them useful in vehicle shock Prac 3 p. 40 absorbers.
Brownian motion
When Robert Brown used a microscope to look at pollen grains suspended in water in 1827, he observed that the pollen grains were constantly moving around as if they were being jostled by something. The particle model explains this so-called Brownian motion as being caused by water particles, which vibrate and are able to move, bumping the pollen grains.
Worksheet 2.1 The story of Robert Brown
pollen grain
Fig 2.1.7
Individual water molecules cant be seen, but their effect on a pollen grain can be observed.
Dissolving
As will be discussed in Chapter 3, dissolving can be explained in terms of particles of solute (e.g. sugar) spreading very thinly throughout particles of solvent (e.g. water).
Dissolving can be explained using the particle model.
Diffusion may be demonstrated by removing a dividing plate between two gas jars, where one gas jar contains a different gas from the other.
Fig 2.1.6
Fig 2.1.8
solute particles
Smells
Your nose is capable of detecting just a few particles of a substance when they dissolve in your nasal membranes. Car exhaust, cooking smells from a barbeque and perfume are small particles which spread by diffusion to our nasal membranes where
37
UNIT
2.1
>>>
Role play
moist nasal membrane
nose
nostril
A role play is another type of model that can help us explain something that is hard to see. In this role play you will experience the movement of particles. Organise a role play in which the class members act as particles which together represent a solid, then a liquid and finally a gas. After completing the role play write a description of the movement of the class members for each state of matter.
Fig 2.1.9
It may need only one particle of a substance for a smell to be detected by the nose.
they are detected. Particles may also diffuse through solids and liquids; for example, an ink stain may spread through paper or clothes.
UNIT
2.1
[ Questions ]
12 Identify a food or drink that contains: a both solid and liquid material b both a liquid and a gas c only solid d only liquid 13 Draw your own version of the particle model. Draw it as three layers, with solid at the bottom, changing into liquid and finally gas at the top. 14 The particle model predicts that only gases can be compressed. Explain how. 15 Describe what you think happens to the bonds (attractions) between particles as heat changes a material from solid to liquid to gas. 16 People might classify sugar and soft plasticine as liquids because they take the shape of their container. Clarify the definition of a solid so that people cannot make this mistake. 17 Explain how the fragrance of a perfume travels throughout a room. 18 Describe Brownian motion. 19 Copy and complete the following table to summarise the properties of substances.
Checkpoint
Models in science
1 Define the term model as used in science.
>>
Solid
definite very low
Liquid
Gas
Think
10 Explain why, when trying to prove a new scientific model, a scientist should repeat their experiments a number of times.
weak medium
38
Analyse
20 There must be some bonds or attractions, however weak, between the particles in a liquid. Explain why. 21 Explain why a liquid (brake fluid) is used in brake lines to transfer pressure to a cars brakes from the foot pedal, while gas is used in shock absorbers. 22 Explain why foam rubber can be compressed, when solids are supposed to be incompressible. 23 Identify which of the following statements are objective (that is, they are based on evidence). a If I go outside with wet hair I will catch a cold. b I know it is raining outside because I can see the rain. c The X-rays showed that I have a broken arm. d Many people say that exercise is good for you.
[ Extension ]
Create
1 Design a device that uses foam balls and an air blower with a variable speed control (say, a vacuum cleaner on reverse) to model the motion of particles in liquids and gases. 6 Find out about capillary action and design an experiment to demonstrate it.
Surf
Find out more about the following science applications by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools selecting chapter 2, and clicking on the destinations button. 7 Research solids, liquids and gases, and investigate plasma, the fourth state of matter. Compile a summary of the states of matter and their properties by using only labelled diagrams. 8 Oooze! Find out how to make a substance that acts like a liquid and a solid.
Investigate
2 Explain the difference between a fluid and a liquid. 3 Compare true and amorphous solids, using examples of each. 4 Research the viscosity of liquids. Explain how temperature affects the viscosity of honey. 5 Explain what surface tension is and how it enables some insects to walk on water.
UNIT
2.1
Prac 1 Unit 2.1
[ Practical activities ]
Plasticine particle models
Aim To build a model showing the arrangement
of particles in various solids
Fig 2.1.10
Equipment
Plasticine
Method
1 Use the plasticine to make 16 identical balls. 2 Investigate the different ways you can pack several of the balls together in regular patterns. One way is shown opposite. 3 Sketch the different packing arrangements you come up with.
spheres arranged in a body-centred cubic pattern
Questions
1 How many regular arrangements did you find? 2 State in which phase of matter you would most likely find regular packing patterns if you could see them.
39
UNIT
2.1
>>>
3 Remove the lump of silly putty and wash it under cold water.
Questions
1 Roll your silly putty into a ball. Describe how the silly putty bounces. 2 Sit a ball of silly putty on a flat bench top. Describe what it does over 5 minutes. 3 Put your silly putty in a small container (e.g. a film canister). Describe how the silly putty changes shape over time. 4 Assess all your observations and decide which state of matter silly putty belongs in.
WARNING: Handle borax with careuse water to wash any spills. Check the relevant materials safety data sheet (MSDS).
Equipment
Saturated borax solution, small container (e.g. film canister), white PVA glue, plastic spoon, small (100 mL) beaker
Method
1 Use the plastic spoon to measure out identical quantities (e.g. 2 spoonfuls each) of water and PVA glue into the 100 mL beaker. Mix thoroughly. 2 Use the plastic spoon again to measure out exactly the same amount (e.g. 2 spoonfuls) of borax solution. Add it to the water/glue mixture and stir rapidly.
Compressibility
Aim To compare the compressibility of a gas
Prac 3 Unit 2.1
Equipment
Food dye, eye dropper, test tube or beaker
Equipment
A plastic syringe (no needle attached), water, rubber stopper
Method
1 Almost fill a beaker or test tube with cold water. 2 Add a drop of food dye and let the mixture stand for several minutes, sketching what you observe every 30 seconds or so. 3 Repeat steps 1 and 2 using hot water.
Method
1 Draw some air into the syringe. 2 Press the opening of the syringe hard against the rubber stopper as shown, and try to compress the air by pushing the plunger. 3 Now draw some water into the syringe and repeat step 2. Fig 2.1.11
Questions
1 Explain why the spread of colour cannot be explained by gravity alone. 2 Explain how temperature affected your observations. 3 Explain the process of diffusion in this experiment in terms of particles.
one or two drops of food dye water test tube
Fig 2.1.12
Questions
1 State which substance you were able to compress. 2 Use particle diagrams to explain what happened with both substances.
solid rubber stopper
syringe
40
2.2
context
As discussed in Unit 2.1, substances can exist in three different states: solid, liquid and gas. Many of their uses rely on them changing from one state to another. Purifying water relies on a change of state from liquid to gas and back again, as does the formation of rain. The burning of a candle relies on the wax changing from a solid to a liquid and then to a gas. Understanding how things change state is therefore very important.
UNIT
Applying a model
In this unit we will use the particle model to help explain how substances change from one state to anotherthat is, from solid, to liquid, to gas and back again. Being able to use a model to explain how or why something happens is a very important skill. In each of the following sections, remember to keep thinking about what the particles are doing.
Fig 2.2.1
Changing states of matter: solid state (ice), liquid state (water), gaseous state (steam)
Solid to liquid
To change a solid (e.g. ice) to a liquid (e.g. water), heat energy must be added to make the particles vibrate more. This causes solids to expand. Adding more heat energy eventually loosens the bonds between the particles and a liquid is formed. This change is called melting. Another example is when a solid wax candle produces pools of liquid wax due to heat energy provided by the flame. The temperature at which a particular solid changes into a liquid is called the melting point. The melting point of water is 0C, while the melting point of wax is around 60C.
Liquid to solid
The reverse of melting is solidification or freezing. When a liquid loses energy, the vibration of particles lessens and the bonds between particles are again strong enough to keep them in fixed positions. Liquid candle wax will naturally lose energy to the surrounding air and solidify when its temperature falls below about 60C. Water will not freeze until it reaches 0C.
41
Changes of state
>>>
Liquid to gas
To change a liquid into a Refrigerators gas, heat must be added to Refrigerators work by pumping a completely break the bonds liquid with a low boiling point, such as freon, through a between particles. When heat network of tubes in their walls, is added to a liquid, small close to food. The freon absorbs bubbles of gas will form heat energy from the food, lowering the temperature of the within the liquid. When food. The energy absorbed by enough heat is added, these the freon causes it to evaporate, gas bubbles become large but it is pumped to a condenser where it is converted back to enough to float to the surface liquid for another circuit. When and boiling occurs. When the freon is condensed, heat is a liquid boils, bubbles of also removed and is transferred to a grid of black wires at the gas escape into the air. rear of the refrigerator, where it This is called evaporation is allowed to dissipate into the or vaporisation. The room. Have you ever noticed the warm air at the rear of a fridge? temperature at which a liquid boils is called the boiling point. The boiling point of water is 100C. A liquid does not have to boil in order for evaporation to occurboiling just speeds up the process. A puddle of water will eventually evaporate on a dry day as Prac 1 particles at the surface absorb enough p. 45 energy from the air to escape the liquid.
that a tub of People living in cold climates may tell you a cold night will freeze faster hot water left outside on A possible than a tub of cold water. How can this be? is lost due to evaporation answer: because more water , so a tub in the hot tub, there is less water to be frozen freeze before a tub of cold of hot water may actually . water. You might like to check this at home
DYO
Gas to liquid
The opposite of evaporation is condensation. Condensation occurs when gas particles lose energy and turn into liquid. When you breathe out on a very cold day, the water vapour in your breath (which is a gas) condenses to form tiny droplets of water which are suspended in air and appear fog-like. A similar thing happens when you breathe on a window and water droplets condense on the glass.
larger bubbles
Fig 2.2.2
Fig 2.2.3
Condensation
42
Solid to gas
A much less common change is when a solid absorbs heat and changes directly to a gas without melting and going through the liquid phase. This is called sublimation. An example of sublimation is when dry ice (frozen carbon dioxide) sublimes to form carbon dioxide gas. Dry ice is used on stage and in movies to produce the effect of fog. The word sublimation may also be used to describe the action of a gas changing directly into a solid.
Sublimation in action
Teacher demonstration
Iodine sublimation
CAUTION: Iodine gas is poisonousexercise caution and use a fume cupboard. Check the MSDS. Safety glasses must be used. Seal the test tube with a rubber stopper after heating and leave inside the fume cupboard. Watch your teacher gently heat the test tube in a fume cupboard until a small amount of purple gas is produced. Observe what happens as the iodine cools.
test tube
heat-proof mat
Fig 2.2.5
Sublimation of iodine
Questions
1 Describe the iodine at the start of this demonstration and any changes in state that occurred 2 Identify whether any liquid iodine formed. 3 Describe the coating on the side of the test tube as the contents cooled. 4 Explain how you know that the purple substance produced after heating was a gas.
43
UNIT
2.2
>>>
Solid to gas
9 Explain why it is unusual to find substances that undergo sublimation. 10 Identify two substances that sublime.
Think
11 State the scientific term used to describe when: a a liquid changes into a gas b a gas changes into a liquid c a solid changes directly into a gas 12 Identify which of the following is likely to be closest to the melting point of steel. A 0C B 60C C 100C D 1500C 13 Identify which of the following is likely to be closest to the melting point of oxygen. A 200C B 0C C 20C D 100C 14 Explain what would happen to an unlit wax candle on a 40C day. 15 State another term for evaporation. 16 State the opposite term to: a melting b condensation 17 Describe three changes of state that may occur in the home. 18 Explain how heat is transferred when a solid sublimes. 19 List the advantages of dry ice compared with water ice when producing fog for a stage effect.
melting
solid
liquid
gas
condensation
Fig 2.2.7
Changes of state
UNIT
2.2
[ Questions ]
Checkpoint
Solid to liquid
1 Identify which change of state the term melting refers to. 2 Describe what is meant by melting point. 3 Describe what happens at the melting point of water and identify at what temperature it happens.
Analyse
20 Draw a change of state diagram based on a triangle with solid, liquid and gas at the corners. On each side of the triangle, indicate the name of the process of the change in state, in each direction (e.g. melting). 21 Kevin notices that when his pool is heated to 27C, the water level falls by about 10 cm each week. a Explain how this can happen when 27C is a lot lower than the boiling point of water, 100C. b Predict what would happen if the pool was: i not heated ii heated to a higher temperature, say 30C
Liquid to solid
4 Identify the two names given to a change of state from liquid to solid. 5 Identify the freezing point of wax.
Liquid to gas
6 Define the terms boiling and evaporation. 7 Describe what happens to the particles when water boils.
Gas to liquid
8 Explain what is occurring in Figure 2.2.3.
44
[ Extension ]
Investigate
1 Prepare a list of melting points and boiling points for several substances. 2 Investigate the history of the thermometer, and the three different temperature scales (Celsius, Fahrenheit, Kelvin). 3 Describe snap freezing and freeze-drying.
Surf
4 Find out more about dry ice and sublimation by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools selecting chapter 2, and clicking on the destinations button. Produce a brochure with a set of rules for handling dry ice safely.
UNIT
2.2
Prac 1 Unit 2.2
[ Practical activity]
Ice to water to steam temperature graph
Aim To investigate what happens
to the temperature of water as it changes state
thermometer
Fig 2.2.8
Equipment
Ice cubes, heat-proof mat, water, gauze mat, beaker (250 mL), measuring cylinder (100 mL), thermometer (0C to 110C) or temperature probe, Bunsen burner, tripod
Method
1 Mix several ice cubes with 100 mL of water. 2 Place the thermometer in the ice/water mixture and record the temperature once every minute for 3 minutes. 3 Light the Bunsen burner and keep the air hole opening in the same position throughout the experiment. 4 Heat the ice/water mixture, and continue to record the temperature at 1-minute intervals until the water boils. Measure the temperature for 3 more minutes after boiling starts, but stop boiling if the water level falls below 50 mL. 5 Record your measurements in a table.
tripod Bunsen burner
heat-proof mat
Questions
1 Present the results in a graph showing temperature on the vertical axis and time in minutes on the horizontal axis. 2 Explain why you had to keep the air hole opening fixed during the experiment. 3 Explain why your graph did not quite start at 0C. 4 Identify any level sections in your graph. Explain why level sections may occur. 5 Imagine you were able to capture the steam produced when all the water has evaporated and measure its temperature as you continued to heat it. Describe the temperature graph that would be observed.
45
UNIT
2.2
Fig SF2.1
These models of a new space plane being built in Japan will be tested in a wind tunnel. Scientists will use the information collected from the models to predict and explain what will happen when they make a real space plane.
Fig SF2.2
Solid
Liquid
Gas
A scientist is an observant person who notices things happening and then wonders why they occur. Having made observations, a good scientist will then investigate further, to try and understand what they have observed. One creative and enthusiastic scientists search for understanding led to the first observation of molecules in motion. The British botanist Robert Brown led a very
46
The British botanist Robert Brown was interested in understanding the world around him.
Fig SF2.3
interesting life. After meeting Joseph Banks, he sailed with Matthew Flinders to Australia and collected vast numbers of specimens of Australian plants. When he returned to England, his studies provided important information about the different types of plants that are found. Brown used a microscope to study plants and was the first to observe and name the large structure found in all living cells, the nucleus. It was while using his microscope to make observations on tiny pollen grains from one of his plant specimens that he made an interesting observation. As he looked through the microscope, the pollen grains sat on the microscope slide in a drop of water. The pollen grains were not alive, yet Brown could see them jiggling and slowly moving about in zigzag paths through the water.
Knowing that the tiny pollen grains were not alive, Brown wondered why they appeared to be moving about. He decided to investigate further and placed a tiny drop of a stain, made from ground dried petals, into a drop of water on a microscope slide. He was surprised to see that the tiny particles of the stain also jiggled about and moved in the drop of water. Brown was unable to provide a full explanation for his observations, but he reported his findings anyway. The motion of tiny non-living objects jiggling about and moving through a drop of water, when viewed with a microscope, became known as Brownian motion.
Jiggling pollen grains in a drop of water. In the diagram the blue lines represent the movement of the blue water molecules, while the wiggly red lines show the movement of the pollen grains.
Pollen grains Drop of water on microscope slide
Fig SF2.4
[ Student activities ]
1 a Describe what a model is. b Describe an example of how the particle model can be used to predict the behaviour of each state of matter when a solid is heated. c Investigate and explain what these other scientific terms mean, and when they are used: inference, hypothesis, prediction, theory, law, observation. 2 a Outline the features of a good scientific model that can lead to it becoming accepted without anybody seeing the thing that the model suggests is there. b Discuss this in a group and create a final list of the most important features of a good scientific model. c Present your findings to the class. 3 The inference from Brownian motion is that the water molecules moving in the water droplet, although too small to see, are observed because of the jiggling effect
produced by their collisions with the pollen grains. Create a short story, or comic strip, to show how the water molecules bumping into the pollen grains produce Brownian motion. 4 Brown mounted the pollen grains in water at room temperature. Another experiment that would have been useful would be to place identical pollen grains into a drop of warm water. a Explain why this experiment might have assisted Brown in understanding what he saw. b Predict the result you would expect to observe. c Use a microscope to test your prediction. 5 a Describe the features of Robert Browns approach that enabled him to make an important contribution to science knowledge. b Outline how technology might have helped Brown in his work.
47
2.3
Have you noticed that your watch is tighter on your arm in summer than in winter? This is because the liquid in our body expands as the temperature rises and so our arm gets a little thicker. Solids, liquids and gases all expand (get bigger) when heated. Expansion can be useful and can be used to activate devices such as a fire alarm. It can also cause problems like making train tracks buckle in the heat.
UNIT
>>>
context
1C
0.001 0.003 0.003 0.009 0.009 0.011 0.011 0.012 0.019 0.025
10C
0.01 0.03 0.03 0.09 0.09 0.11 0.11 0.12 0.19 0.25
100C
0.1 0.3 0.3 0.9 0.9 1.1 1.1 1.2 1.9 2.5
concrete slab
Expansion of solids
Different solids expand at different rates. The table above shows how much a 1-metre length of particular solids will expand when the temperature is increased by 1, 10 and 100C. Notice that steel and concrete expand at the same rate. This allows steel to be used as reinforcement for concrete without the risk of cracking caused by one material expanding at a different rate to the other. Consider what would happen if aluminium bars were used instead of steel.
Fig 2.3.1
Reinforced concrete has steel rods to allow it to contract and expand without cracking and to give it more strength.
The steel rods may be heated before the concrete sets, so that after the concrete has hardened, the rods try to contract and this pulls the concrete more tightly together. This is called pre-stressing. Expansion gaps must be left in bridges and railway tracks, otherwise they may buckle as they expand in warm weather. You may also have noticed that power lines sag more on hot days due to expansion.
48
expansion gap
expansion gap
Fig 2.3.2
Fig 2.3.5
Brass expands more than invar when heated, so how many ways could this bimetallic strip bend?
cold day
hot day
bimetallic strip bends upwards to complete the circuit and turn on the alarm bell
Prac 1 p. 53
Prac 2 p. 53
Prac 3 p. 53
Fig 2.3.7
By applying the expansion theory we can loosen tight-fitting jar lids. Look at the expansion differences between glass and steel in the expansion table. Notice that steel will expand more than glass when we raise the temperature by 100C. The ends of a garden hose may be heated by placing them in hot water so they expand and are more easily joined. When the hose ends cool down, they contract and fit together more tightly.
Cracking dishes
A cold dish or glass may crack when its run under hot water, due to one side expanding faster than the other, forcing the object to crack. Not all expansion is a nuisance. A thermostat in a heater, oven or refrigerator may contain a bimetallic strip that controls a switch. As the name suggests, a bimetallic strip is made of two different metals. The strip bends when heated, because one metal expands a greater distance than the other, just as a runner on the outside of a curved track runs further than a runner in an inside lane.
after cooling
Expansion of liquids
In general, liquids expand much more than solids when heated. Care must be taken to leave space for liquids to expand into when filling containers such as
49
UNIT
2.3
Expansion
petrol and liquid petroleum gas (LPG) tanks. A car radiator contains water that is used to cool the engine. This water expands when it absorbs engine heat, and may overflow into an expansion chamber.
Any further expansion of water in the radiator will cause an overflow into the expansion chamber.
>>>
If water at 4C didnt sink to the bottom of lakes and ponds when they freeze in winter, fish and other animals wouldnt be able to survive. By sinking below the ice layer, water at 4C is insulated from the surroundings by the ice layer and will not freeze as easily. Its just as well water behaves strangely compared to other liquids!
Fish in ponds prone to freezing survive because ponds freeze from the top down, not the bottom up.
Fig 2.3.8
Fig 2.3.10
expansion chamber
radiator
ice layer
Thermometers are used to measure temperature. They contain a liquidmercury or coloured alcohol in a bulb connected to a narrow tube that makes the liquid rise noticeably when heated. Clinical thermometers containing mercury have a kink with a constriction (narrowing) at the lower end to prevent the mercury falling back after a patients temperature has been taken, allowing more time to read the temperature accurately.
A clinical thermometer
1C 2C 3C 4C
Expansion of gases
Gases react to changes in temperature more than solids and liquids do. A gas will try to expand if heated, but may be prevented from doing so by its container. Since the particles of a gas will diffuse to completely fill a container, its not always quite correct to say that gases contract to take up less space. Instead we say that a gas exerts less pressure when it is cooled or more pressure when it is heated in a container. The expansion of gas may be demonstrated as shown here.
The gas (air) in the test tube expands due to heat from the hand and is forced into the beaker.
Fig 2.3.9
42 41
40
constriction
38 37 36
39
35
mercury in bulb
Fig 2.3.11
50
Hot air balloons rise to great heights by making use of the fact that hot, expanded gas is less dense than cooler gas.
Worksheet 2.3 Expansion graphs
UNIT
2.3
[ Questions ]
Checkpoint
Expansion and particles
1 Copy and complete: Substances generally ______ when heated and ______ when cooled. 2 Explain what the particles in a substance do when heated to take up more space.
Expansion of solids
3 Describe what happens to the movement of the particles in a solid as it is heated. 4 Figure 2.3.13 shows a solid in terms of the particle model. Identify whether Figure 2.3.14, 2.3.15 or 2.3.16 best shows the solid after heating. Fig. 2.3.13
Before heating
Fig 2.3.12
Fig 2.3.14
Fig 2.3.15
Fig 2.3.16
Expansion of liquids
5 State whether liquids expand more or less than solids when heated. Give a reason for your answer. 6 Describe two uses of expanding liquids.
Expansion of gases
7 Identify what may be used to prevent a gas expanding when heated. 8 State what happens to the pressure as gas is heated inside a container.
10 Use the expansion table on page 50 to identify which solid or solids expand: a most when heated d the same as platinum b least when heated e three times more than wood c the same as steel f four times more than pyrex 11 Copy and complete: A gas trapped in a container that is heated will exert more _____ on the walls than in a cold container. 12 State why you think mercury or coloured alcohol is used in thermometers instead of coloured water. 13 Explain why it is more important to have a constriction in a clinical thermometer than in a laboratory one. 14 Describe why a clinical thermometer is usually shaken after use.
Think
9 a Identify two problems that expanding solids can cause. b Explain how each problem is overcome.
>> 51
UNIT
2.3
Expansion
>>>
[ Extension ]
Investigate
1 Research how a spiral of bimetallic strip can be used as a temperature gauge or how it is used in flashing car indicators. 2 Investigate the expansion of air using an apparatus similar to the one shown in Figure 2.3.17. Fig 2.3.17
15 Identify the temperatures at which water does the opposite of what other substances do. 16 Describe how the fish in a lake can survive when the lake freezes. 17 Explain why there are lines in a concrete footpath. 18 Some barbecue hotplates make sounds when they are first heated or begin to cool down. Describe what causes these sounds.
Analyse
19 Explain what the particles in a gas are doing to cause pressure. 20 A light globe is made of glass with a platinum filament. a Use the table on page 48 to state the expansion abilities of both glass and platinum. b Describe what you notice about their expansion abilities. c Explain why the answer to part b is important. 21 Explain why invar is often used to make accurate technical instruments that are used in hot situations. 22 Identify which type of bimetallic strip would bend most when heatedone made of iron and brass, or one made of iron and aluminium. 23 Draw a diagram to demonstrate how a bimetallic strip can be used in a switch. 24 Identify how much the following materials would expand by. a a 1 metre steel rod heated so that its temperature rises by 100C b a 1 m plank of wood that increases in temperature by 1C c a 2 m block of concrete heated so that its temperature goes up by 10C d a 50 cm iron rod that increases in temperature by 100C 25 List the following in order from least to greatest expansion when heated: concrete, pyrex, brass, platinum.
small balloon
string
weight
Surf
Find out how different types of thermometers work by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 2, and clicking on the destinations button.
Skills
26 Draw a bar graph comparing the expansion of different substances using the information in the table on page 48. 27 Construct a table like the one on page 48, but for a 10-metre length of each material.
52
2.3
UNIT
Prac 1 Unit 2.3
[ Practical activities ]
Ball and hoop
Aim To investigate the expansion of metals on heating Equipment
Ball and hoop apparatus, tongs, Bunsen burner, heat-proof mat
Fig 2.3.18
Method
1 Check that the ball fits through the hoop when both are at room temperature.
An expansion gauge
Prac 2 Unit 2.3
Method
1 Assemble the apparatus as shown.
metal rod
Questions
1 Identify the scientific idea or concept that this activity demonstrates. 2 A different the ball did not fit through the hoop at room temperature. Explain what you would do to make it fit.
retort stand
ruler splint
Prac 3 Unit 2.3
pivot
Fig 2.3.19 2 Use a Bunsen burner to apply heat to the metal rod. 3 Repeat using a rod made from a different metal.
Method
1 Hold a bimetallic strip using the tongs and heat it in a Bunsen burner flame until you notice an effect. 2 Repeat the experiment but this time heat the other side of the bimetallic strip.
Questions
1 Explain why a long splint is better than a short one. 2 Describe what you should do to ensure a fair comparison of different metals using this apparatus.
Questions
1 Describe what would happen as more heat is applied. 2 Explain how you can tell which side of the strip is expanding the most.
53
UNIT
2.3
2.4
Which weighs morea kilogram of lead or a kilogram of feathers? The answer to this old trick question is, of course, that they both weigh the same1 kilogram! What people may be thinking of when they wrongly answer a kilogram of lead is the different density of each substance. The density of substances determines whether they float or sink. If a substance floats on water, then it is less dense than the water it floats on.
UNIT
>>>
context
Introducing density
We used the term density in the last section to describe how closely the particles in a substance are packed together; for example, hot air is less dense than cold air because the particles are more spread out. We can extend this idea to compare the densities of different substances by considering how much mass is packed into each cubic centimetre. A technical definition of density is: the mass of a 1-centimetre cube of a substance. The densities of several substances are shown in Figure 2.4.1.
Fig 2.4.1
Black holes
Astronomers believe that black holes in outer space come in various sizes, some no bigger than a pinhead, but with a mass many times greater than that of our sun, making black holes the densest objects imaginable! The gravitational attraction of black holes is so strong that not even light can escape.
air
foam rubber
wood
oil
water
glass
steel
iron
copper
lead
gold
54
Calculating density
Of course, most substances are not easily available in the form of 1-centimetre cubes, so how can we find their densities? To calculate the density of a substance, we need to know two things about a sample of the substance: its mass (e.g. in grams) and its volume (e.g. in cubic centimetres, or cm3 for short). The volume, or space taken up by an object, can be found in one of two ways.
If an object is irregular, or odd shaped, its volume may be found by measuring the rise in water level when it is placed into a measuring cylinder containing enough water to cover the object. Note that 1 mL takes up the same space as 1 cubic centimetre. This method will not work, however, if the object is porous or absorbs any water.
Calculation example
Consider a lump of plasticine having a mass of 4.8 grams and a volume of 3 cubic centimetres. To find the density we can use the rule: density = mass volume So for our lump of plasticine, density = 4.8 3 = 1.6 grams per cubic centimetre or 1.6 g/cm3 for short. Another way of writing the rule for density is: density = mass volume or D = m V/ Prac 1 Prac 2
p. 58 p. 59
Volume
If the object is a rectangular prism, its volume is found by multiplying length x width x height (you may recall the formula V = L x W x H from maths).
H = 2 cm
W = 3 cm L = 4 cm
Prac 3 p. 59
Fig 2.4.2
An object will float if its density (or average density) is less than that of the liquid it is in. Pure water has a density of 1 g/cm3. This means that for objects placed in water, their density must be less than 1 if they are to float.
75 mL
80 70 60
50 mL
50 40 30 20 10
Fig 2.4.3
The object in the measuring cylinder at right has a volume of 75 50 = 25 mL or 25 cubic centimetres.
Whether or not an object will float depends on how its density compares with the density of the liquid it is in.
Fig 2.4.4
55
UNIT
2. 4
Density
Ice is less dense than water, so it will float. Steel is more dense than water, so it will sink in water. Salt water is more dense than fresh water, making it easier to float in the ocean than in a freshwater lake or river. An egg will sink in fresh water, because its average density is just greater than that of the water. Mixing some salt in the water increases the density of the liquid to just greater than that of the egg. The eggs density is now less than the liquids, and the egg floats.
Confirm this fact by repeating the experiment at home.
>>>
Fish contain a swim bladder that can be used to control the fishs average density by adding or removing air. This allows the fish to float, sink or stay suspended as it swims. Changes to the temperature or the amount of salt in the water can affect its density, so a fish may need to be able to alter its density just to remain at the same depth. Scuba divers wear inflatable vests that use the compressed air from their tanks to do the same job. Submarines work on the same principle, using compressed air to expel water from ballast tanks, getting lighter in the process.
Fig 2.4.5
hydrometer
Brewing scientifically
fresh water egg salt water
UNIT
2.4
[ Questions ]
stronger beer
weaker beer
Beer brewers use a hydrometer to measure the density of beer at various stages in the brewing process. Depending on the alcoholic strength of the liquid, the hydrometer floats at different levels. A higher alcohol content causes the brew to have a higher density. The higher the density of a liquid, the higher an object will float.
Checkpoint
Introducing density
1 State which weighs more: a tonne of gold or a tonne of sawdust. 2 Describe what is meant by the density of a substance. 3 State the density of: a water c copper b wood d gold Fig 2.4.6
Brewers use the term specific gravity to refer to density.
Calculating density
4 Identify two things we need to know to find the density of an object. 5 State the formula for: a the volume of a prism b density 6 Describe two ways to find the volume of an object.
56
Skills
11 A piece of metal has a mass of 6 grams and a volume of 2 cubic centimetres. Calculate the density of the metal. 12 Calculate the volume of a block of glass of length 4 cm, width 2 cm and height 3 cm. 13 Calculate the volume of the brick in Figure 2.4.7.
32 g 2 cm
2 cm 4 cm
26.4 g 3 cm
2 cm 4 cm
Fig 2.4.9
6 cm 90 g 8 cm 20 cm
Fig 2.4.10
7700 kg
5 cm
Fig 2.4.7 14 Calculate the volume of the stone shown in Figure 2.4.8. Fig 2.4.8
volume = 50 cm3
4 cm
5 cm
Fig 2.4.11 17 Calculate the density of a type of rubber if a sample of it has mass 75 g and volume 50 cm3. 18 Calculate the volume of the object in the measuring cylinder in Figure 2.4.13 if it contains 30 mL of liquid. 19 A type of garden potting mix has a density of 1.2 g/cm3. Calculate the mass of 2 litres (2000 cm3) of this potting mix. 20 Calculate the mass of 4 cubic centimetres of gold.
Fig 2.4.12
Fig 2.4.13
>>
15 If the mass of the stone in question 14 is 32 grams, calculate its density.
>> 57
UNIT
2. 4
Density
>>>
23 A lump of brand A concrete has the same mass as a lump of brand B concrete, but the brand B lump has less volume. State which concrete brand is the most dense. 24 Describe how you could find the density of an oil sample using a beaker, an electronic balance and a calculator. 25 Oil floats on water. Compare the density of oil to the density of water. 26 Perspex has the same density as a type of cooking oil, but a lower density than water. Draw a diagram to demonstrate what would happen if all three are placed in the one beaker.
21 The tile shown in Figure 2.4.14 has a density of 2.5 g/cm3. Calculate how much a load of 100 of these tiles would weigh. Fig 2.4.14
4 cm
10 cm
10 cm
[ Extension ]
Investigate
1 Research what Plimsoll lines on ships are used for. 2 Explain how Archimedes helped the King of Syracuse to determine whether the goldsmith who made the kings crown used pure gold or not.
Think
22 Two blocks of wood, one oak and the other cedar, have the same volume, but the cedar block has less mass than the oak. Compare the densities of oak and cedar.
UNIT
2. 4
Prac 1 Unit 2.4
[ Practical activities ]
Density of cubes
Aim To measure and calculate the density of cubes of different substances Equipment
Density kit containing 1-centimetre and 2-centimetre cubes of various substances, scales, ruler, calculator 3 Copy and complete the table below for each 2 cm cube.
Substance
Aluminium Brass
Mass (g)
Volume (cm3)
8 8 8
Density (g/cm3)
Method
1 Find the mass of each cube using the scales. 2 Copy and complete the table below for each 1 cm cube.
Substance
Aluminium Brass
Mass (g)
Volume (cm3)
1 1 1
Density (g/cm3)
Questions
1 Explain why 8 is given as the volume of the larger cubes when the side length of each cube is only 2 cm. 2 Identify which of the densities you calculated were similar. Explain this result. 3 List the substances in order of density from smallest to largest.
58
Density of liquids
Aim To design an experiment to determine the
Prac 3 Unit 2.4
Equipment
Equipment
Measuring cylinder (100 mL), various irregular objects small enough to fit in the measuring cylinder, e.g. stone, ball bearing, bolt, plasticine, scales, water
Measuring cylinder, scales, various liquids (e.g. water, cooking oil, kerosene, salt water, turpentine)
Method
1 Devise a way of finding the mass of, say, 50 mL of each liquid. 2 Calculate the density of each liquid.
Method
1 Find the mass of each object using the scales. 2 Place 50 mL of water in the measuring cylinder. 3 Hold the measuring cylinder at an angle and gently slide one of the objects into the water. Note the new water level and hence find the volume of the object. 4 Repeat steps 2 and 3 for the other objects. 5 Copy and complete the table shown.
Questions
1 Explain how you found the mass of the liquid in each case. 2 Draw a diagram to demonstrate where each liquid would float if all the liquids were all placed in the one beaker and allowed to settle into layers. Hint: the most dense layer will be at the bottom.
Object
Mass (g)
Volume (cm3)
Density (g/cm3)
Questions
1 Compare your densities with those found from previous experiments or from Figure 2.4.1. 2 List the possible sources of error in this experiment.
59
UNIT
2. 4
>>>
Chapter review
[ Summary questions ]
1 State the three phases of matter. 2 Describe a household example of each of the states of matter. 3 Copy and complete: Matter is something that takes up _____ and has _____. 4 Complete the table below, summarising the different possible changes of state.
From Solid Liquid
melting
c An object will float if it has a higher density than the liquid it is in. 18 Identify which of the following are possible units for density. (There may be more than one answer.) A grams B cubic centimetres C cubic centimetres per gram D grams per cubic centimetre E kilograms per cubic metre 19 Describe a method you could use to find the volume of a brussels sprout. 20 Calculate the volume of the block of metal shown. 21 Calculate the density of the block of metal shown.
1100 kg 5 cm
To
Gas
5 cm
4 cm
5 Identify all the changes of state involved when a container of frozen soup is thawed out and boiled. 6 Identify a substance that sublimes. 7 State the opposite term to expansion. 8 Copy and complete: Expansion is more noticeable at __________ temperatures or in __________ objects. 9 Explain what a model is and why they are used in science. 10 Identify two phenomena in this chapter that can be explained by the particle model.
[ Interpreting questions ]
22 Identify at which of the following temperatures water is the most dense. Give a reason for your answer. A 0C B 1C C 3C D 5C 23 Draw a diagram to demonstrate how a bimetallic strip may be used to control the heating element in an electric iron. 24 Explain how a thermometer works. 26 Sometimes when oil spills from a ship at sea it catches alight. Explain why this is possible given that there is so much water. 27 Explain what causes gas to exert pressure when placed in a container. 28 Design an experiment to find the density of a piece of metal that has an irregular shape. 29 Using your knowledge of the particle model, draw diagrams to demonstrate the arrangement and motion of particles in a solid, a liquid and a gas.
Worksheet 2.5 Solids, liquids and gases crossword Worksheet 2.6 Sci-words
[ Thinking questions ]
11 Identify three other models that are used in science to help us better understand a phenomenon. 12 Compare the bonds between particles in a solid with those in a liquid. 13 List which states of matter are compressible. 14 Describe one piece of evidence that supports the particle model. 15 Explain why a dish may crack when run under hot water. 16 Substance A has a melting point of 10C. Identify its state at normal room temperature. 17 True or false? a Density is how heavy an object is. b Density describes the amount of mass in a certain volume.
60
>>>
3
Key focus area:
4.5, 4.7.5
3.1
context
There are a great number of mixtures. Soft drinks, Vegemite, coffee, milk, sea water, hair gel, air and sunscreen are a few examples of mixtures that we see every day. A mixture contains two or more chemically pure substances that may be separated using a physical process such as sieving or filtering. When a mixture is made, no new substances are formed its just that the particles of each substance are spread between the particles of the other substances. Look around your home and you will be surprised at the number of different mixtures that we use every day.
UNIT
>>>
Solutions
Solutions are the most common type of mixture. A solution is formed when one substance (called the solute) dissolves in another (called the solvent). For example, when sugar is mixed with water, the solute is the sugar and the solvent is the water. We say that a sugar solution has been formed. One characteristic of solutions is that they are transparent (though they may be coloured)no particles of the solute can be seen as they are too small and are spread evenly throughout the solvent. When a solution is made, the solute does not disappear. All of the solute added is still in the solution even though you cant see it. The total mass of a solution is always equal to the mass of the solvent plus the mass of the solute. This is shown in Figure 3.1.1.
solvent particles
solute particles
Fig 3.1.2
solvent
solute
solution
Fig 3.1.1
Mass stays the same in solutions. We say that the mass is preserved.
Fig 3.1.3
62
Solutions can also be made by dissolving a liquid in a liquid, or a gas in a liquid. The table below gives some examples of solutions.
Solute
Carbon dioxide gas Detergent Oil Germ-killing chemicals Nail polish Pen ink stains
Solvent
Water Water Petrol Water Acetone (nail polish remover) Methylated spirits
Solution
Soda water Washing up water Two-stroke motor mower fuel Disinfectant No common name No common name concentrated solution dilute solution
solute particle
Fig 3.1.4
A concentrated and a dilute solution. Note the increased number of solute particles in the concentrated solution.
If one substance can dissolve in another, we say that the substance is soluble. A substance that will not dissolve is called insoluble for example, sand is insoluble in water.
Suspensions
A mixture of water and sand is not a solution, but is called a suspension. In a solution, the sizes of the solute and solvent particles are similar. In a suspension, the particles being mixed are bigger than those in the solution and, though they appear suspended initially, they will settle to the bottom of the container if left long enough. Some medicines are suspensions, as are some types of paint: they separate into different layers and therefore need to be re-mixed before use. The substance that settles out of a suspension is called the sediment. Sediment can be filtered out of a suspension, unlike the solute in a solution, which would pass through the filter.
A suspension showing the larger particles separating out by gravity
Prac 1 p. 67
Prac 2 p. 68
Prac 3 p. 68
Concentration
When a solvent (e.g. water) Snowy solutions contains a large amount of When a substance is solute (e.g. salt), the solution is dissolved, the freezing point of the solvent is said to be concentrated. The lowered. Thats why salt opposite of concentrated is is often sprinkled on dilute. Adding more solvent roads to prevent ice forming. For the same will dilute a concentrated reason, adding antifreeze solution, while adding more to a car radiator provides solute will make the solution protectionit makes it less likely that the water even more concentrated in the radiator will get If more and more solute is cold enough to freeze. added to a solvent, a point is reached where no more will dissolve. When a solution reaches this point, it is said to be saturated. Caramel is made from a saturated sugar solution.
Fig 3.1.5
sediment
63
UNIT
3.1
>>>
Kidney dialysis
When a person with kidney failure undergoes dialysis to clean their blood, a super-fine filter is actually removing soluble wastes from a colloidal solution of blood proteins.
This results in several possible colloid combinations, which are described below.
Sols
A sol is an emulsion where particles of a solid are spread throughout a liquid. Unlike a solution, a sol is not transparent. Blood plasma is an example of a sol in which solid blood proteins are spread throughout water. Blood is made up of blood plasma and blood cells (these will be studied in more detail later in Science).
dispersion medium
Emulsions
An emulsion is a colloid in which particles of a liquid are spread throughout another liquid. Milk is an emulsion of liquid fat spread throughout water. Medicinal ointments are other examples of emulsions. Normally oil and water will not mix, but if detergent is added, it helps break up fat and oil drops into small particles that allow an oil/water emulsion to form. A chemical that helps fats form an emulsion is called an emulsifier. Detergent helps emulsify fats, as does bile in our intestines, making fats easier to digest. Many foods contain emulsifiers to stop fats separating into layers.
Fig 3.1.8
Milk is an emulsion.
colloid particle
Fig 3.1.6
Fig 3.1.7
How then can we tell the difference between a solution and a colloid? The main difference is that a solution is clear, but a colloid is cloudy due to light reflecting off the larger particles. The substance in which the particles are being spread is called the dispersion medium. It may be a solid, a liquid or a gas.
Foams
A foam is a colloid made up of a gas mixed with a liquid. Shaving foam and fire extinguisher foam are examples.
64
Fig 3.1.9
Smoke
Smoke is a example of a colloid formed when a solid (carbon) is spread throughout a gas (air).
Gels
A gel is a colloid in which liquid particles (e.g. water) are held between the particles of a solid (e.g. gelatine). Jelly is a well-known example of a gel. Gels melt easily when heated.
Smoke is a colloid.
Fig 3.1.11
Mist
A liquid spread throughout a gas may form a colloidal mist. Fog is a common example.
Fog is a colloid.
Fig 3.1.12
Jelly is a colloid.
Fig 3.1.10
UNIT
3.1
Solutions
[ Questions ]
Worksheet 3.1 Representing mixtures Worksheet 3.2 Types of mixtures wordfind
Checkpoint
1 Clarify what is meant by the terms solution, solute and solvent. 2 Draw a diagram to compare a solution, a solute and a solvent. 3 Choose the correct answer: When coffee powder is mixed with hot water, the water is the: A solute B solvent C solution
4 In a solution, the particles of the solute cannot be seen because: A they are spread too thinly throughout the solvent B they have been destroyed by the solvent C they have been converted to solvent particles
65
UNIT
3.1
Types of mixtures
5 True or false? a In a solution, the solvent is always water. b A solute is always a solid. c A substance that is insoluble must be a solid. d When a mixture is made, new substances are not formed.
>>>
19 Explain why some medicines need to be shaken before using them. 20 Propose a method to separate the solid from the liquid in a suspension by researching how some suspensions are separated in industry. 21 Outline how a torch could be used to test for a colloid. 22 Explain how detergent changes an oil/water suspension into an emulsion. 23 Classify each of the following as a solution or suspension: glue, saline (salt water), cream, whisky, muddy water, sunscreen 24 Draw a diagram to compare the particles in a solution, an emulsion and a suspension. 25 Explain why is it important that fertilisers are soluble. 26 Describe a method that would enable you to distinguish between a solution and a colloid.
Concentration
6 Compare a concentrated and a dilute solution by listing their differences and similarities in a table. 7 Draw two diagrams showing a concentrated and a dilute solution, labelling the solute and solvent.
Suspensions
8 Explain why the particles in a suspension sink. 9 Identify the substance that settles out of a suspension in the following examples: a a mixture of chalk and water b muddy water c used engine oil that contains bits of worn metal 10 State two examples of suspensions.
Analyse
27 Copy and complete the following table after referring to Figure 3.1.1.
Colloids
11 Explain why a colloid is said to be in between a solution and a suspension. 12 Identify three classes of colloids and the dispersion medium of each. Give an example of each and construct a table to display your answer.
90 65 180
Think
13 Graffiti remover is used to wash paint from a wall. Classify the paint as solvent, solute or solution. 14 Identify two examples of common substances that are: a soluble in water b insoluble in water 15 Which of the following is not a solution? A Coke B salt water C sand in water 16 Describe how a dilute solution is formed. 17 Name a solution in which there are many solute particles and few solvent particles. Define the type of mixture that this represents. 18 Design an experiment to determine whether cordial is a suspension or a solution. In your experiment, you should: a outline a clear aim for the experiment b identify conditions (variables) that will change or should be kept constant c suggest ways of reducing any wastes that might be made in the experiment
Skills
28 To test the solubility of an unknown solid, students placed a solid into 200 mL of water. They then decided to see if solubility changed with increasing temperature of the water. The results are shown in the table.
Temperature (C) Amount of solid (g)
25 17
30 20
45 32
55 40
65 46
70 49
75 52
a Draw a line graph showing the relationship between the amount dissolved and the temperature of the water. c Predict the amount of solid that could be added to water at 35C and 85C. d State a conclusion to the investigation.
66
[ Extension]
Investigate
1 a Define an alloy. b Explain why an alloy is a mixture. c Identify some alloys that may be found around the home. d Relate the use of each alloy to its properties, such as lightness or resistance to rust. 2 Using the Internet or other resources, identify the components of a soft drink. Compare the ingredients of diet and normal soft drinks.
Surf
Find out more about the following science applications by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools selecting chapter 3, and clicking on the destinations button. 4 Washing powders can come in concentrated form. Investigate how this is done. 5 Salt is used to dissolve ice on roads, making them safer. Create a brochure to explain to drivers why the salt is used and how it works.
Action
3 Determine whether equal amounts of washing powder will dissolve in cold and hot water. a Design a test involving stained material to compare the results of washing in both types of water. b Identify any steps in your method that might be dangerous, e.g. working with hot water, spilling washing powder onto skin. Describe how you could perform these steps safely. c Carry out your test and report on your results. DYO
UNIT
3.1
Prac 1 Unit 3.1
[ Practical activities ]
Testing solubility in water
Aim To test the solubility of various substances
in water 4 Return the shaken test tube to the test tube rack and observe it. 5 Repeat steps 1 to 4 for the other substances, recording your observations.
Equipment
Salt, sugar, ground-up coloured chalk, copper sulfate, flour, soil, household and other substances as provided by your teacher, test tubes, test tube holder, water, rubber stopper(s), spatula(s), safety glasses
Questions
1 Classify all the substances tested as soluble or insoluble. 3 Explain why was it important to use a very small amount of each substance. 4 Identify which substance appeared to be: a most soluble b least soluble
Method
1 Use a spatula to place a very small amount of a substance into a test tube. 2 Half fill the test tube with water. 3 Place a rubber stopper in the top of the test tube and shake it in an attempt to dissolve the substance.
67
UNIT
3.1
Types of mixtures
>>>
Aim To find out how temperature affects the solubility of two different chemicals
5 Again swirl the test tube and try to dissolve more chemical. 6 Place the test tube in the rack and leave it to cool. Observe what happens as it cools. 7 Repeat steps 1 to 6 using calcium acetate.
Equipment
Test tubes, test tube holder, test tube rack, copper sulfate, calcium acetate, spatula, safety glasses
Method
1 Fill the test tubes with cold water to a depth of 5 cm. 2 Use the spatula to add a tiny amount of copper sulfate to a test tube, and gently swirl the test tube to dissolve the chemical. 3 Continue adding more chemical until a small amount remains undissolved in the test tube. 4 Gently heat the solution for about 1020 seconds. Do not boil it. Fig 3.1.13
Questions
1 Describe the effect (if any) of heat on solubility. 2 Explain the difference in solubility between copper sulfate and calcium acetate. 3 Calcium acetate and air have similar solubilities. Use this information to explain the bubbles that are seen as water is first heated. 4 Describe what happens as a saturated solution cools. (You may have to leave your test tube of copper sulfate solution overnight before answering this question.) 5 Draw diagrams to show what happens to the solute and solvent particles as a saturated solution cools.
copper sulfate/water
Bunsen burner
sugar cube
Fig 3.1.14 4 Swirl both beakers for 10 seconds in an attempt to dissolve as much of the sugar as possible.
Equipment
Two sugar cubes, two beakers, water
Questions
1 The crushed cube has greater surface area (imagine it spread over the bottom of the beaker). Describe what effect increasing the surface area of a solute has on the rate of dissolving. 2 Describe why all of the crushed cube is used rather than some of it. 3 State reasons for keeping water level and temperature the same in both experiments.
Method
1 Place an equal amount of water (e.g. to a depth of 5 cm) at the same temperature in each beaker. 2 Crush one of the sugar cubes into separate crystals. 3 Place the whole cube in one beaker and the crushed cube in the other.
68
3. 2
The separation of mixtures can give us pure substances. To obtain pure substances, we often need to remove insoluble substances from a mixture. Since each part of a mixture keeps its own properties we can use several methods. This is important as it is used in industry to purify metals, and in other activities, like panning to separate gold from river sand, and wine making to remove sediment from old bottles of wine.
UNIT
context
A sieve in action
Fig 3.2.1
Decanting
Decanting is a simple method of separation that may be used with suspensions. The mixture is left long enough for most of the sediment to collect at the bottom of a container and the liquid above the sediment is carefully poured into another container. Old wines contains sediment which may be re-spread throughout the wine if a bottle is moved too much during pouring. To avoid this happening, wine is often decanted from the bottle into a decanter before pouring.
Filtration
Filtration is just a very fine sieving process. Instead of a sieve, a special filter is used. One type of filter used in the laboratory is filter paper, which contains millions of tiny holes that allow particles in a solution to pass through, but not the larger particles.
Filter paper Funnel Residue (solid material left in the filter paper) Filter stand Beaker
Sieving
Sieving is useful when there are different-sized particles in a Whale of a filter Instead of teeth, the baleen mixture. If you accidentally add whale has a filtering too many chocolate chips to a device composed of 300 mixing bowl containing flour, plates of whalebone you could sieve the mixture so (baleen) hanging from the roof of its mouth. These that the finer flour passes baleen filter small through the sieve while the plankton called krill from chocolate chips are collected sea water. The whale then uses its huge tongue to on the sieve. Crushed ore may wipe the filter clean before be sieved to collect pieces that swallowing the krill. require further crushing prior to extraction of metals. Another common use for sieving is in fishing nets with various-sized holes to catch legal-sized fish.
Fig 3.2.2
The filtering process is used to separate solids from liquids in the science laboratory.
69
>>>
Similarly, a laboratory centrifuge holds special test tubes at an angle so that the heavier particles in a liquid are forced to the bottom of the tubes. Blood can be separated using a centrifuge. Milk and its cream can be separated this way too.
Gravity separation
If a mixture containing water and particles of different weights is stirred or shaken, the heaver particles will tend to move towards the bottom of the container. This is how panning for gold workstiny (but heavier) specks of gold sink to the bottom of the pan, so they remain when the lighter gravel is washed off.
Centrifuging
Another method involving the movement of particles is centrifuging. The spin drier in a washing machine is a type of centrifuge. When the spin cycle activates, the drum rotates rapidly, forcing the clothes and water against the drum wall. The walls contain small holes that allow water to pass through them and be pumped out, leaving the clothes spun dry.
A laboratory centrifuge separating blood into layers
Fig 3.2.4
Magnetic separation
Scrap iron may be separated from non-magnetic materials using a powerful electromagnet suspended over a conveyer belt. The electromagnet may be turned on and off to release the collected iron.
wet clothes
spinner
Prac 2 p. 73
spin
to basin
Fig 3.2.3
Fig 3.2.5
70
Electrostatic separation
Industrial chimneys may contain electrostatic precipitators, which remove waste products by charging particles as they move up a chimney. The particles, once charged, are attracted to metal plates (also charged) and are prevented from being released into the atmosphere.
Froth flotation
Froth flotation is used in the processing of minerals. During copper production, rocks containing grains of copper must first be crushed and ground to a fine powderthis is called liberation. Once liberation has occurred, the powder is mixed with water and special chemicals in flotation cells. Air is then blown into the mixture to produce bubbles of froth. Chemicals in the mixture stop the bubbles bursting, and help the copper stick to the bubbles. The unwanted part of the powdered rock, called gangue, falls to the bottom of the flotation cells. Copper ore, containing a high proportion of copper, may then be skimmed from the top of the flotation cells.
charged wires
+ + +
+ + +
+ + +
charged plate
Fig 3.2.7
smoke
An electrostatic precipitator
Fig 3.2.6
UNIT
3.2
Decanting Sieving
[ Questions ]
Froth flotation
6 Outline the process of froth flotation by placing the following terms in order from first to last: chemicals added, skimming, liberation, air blown in. 7 Define gangue and explain where it comes from.
Checkpoint
1 Draw a diagram to clarify how you could decant water from a sand/water mixture. 2 Explain a use of sieving and how this process works.
Think
8 Identify and explain two uses of filtration in your home. 9 Draw a crosssection diagram of the filtration method used in the laboratory. 10 A quarry produces a mixture of small and large crushed rock pieces. Explain the basic method that may be used to separate the small and large pieces. 11 During a heavy downpour, rain washes only the heavier stones from a driveway into a pile at the lowest point of the driveway. Identify and explain which separation method has occurred. >>
Filtration
3 True or false? a Filtration may be used to separate a solute from a solution. b Filtrate is what passes through a filter. 4 Explain what the residue is in filtration.
Centrifuge
5 Describe how the spinning of a centrifuge causes separation.
71
UNIT
3.2
>>>
Example
Wine from an old bottle poured into a carafe, leaving sediment behind.
Separation method
Decanting
Brief description
Liquid gently poured from one container into another, leaving sediment at the bottom of the original container.
12 Copy and complete the table above to summarise all separation methods in this section. Add as many lines as you need. 13 Identify some household appliances that contain a centrifuge. Examine other areas in the house where this method of separation could be used 14 Specify a separation method to assist with the following problems: a A container of small metal nuts and bolts is spilt on the grass near a workshop. b An orchardist wishes to separate under-sized fruit before packing fruit for market. c An industrial chimney belches unacceptable amounts of waste into the atmosphere. d An apiarist needs to remove honey from honeycomb before bottling. 15 Explain why salt cant be separated from salt water by using filter paper. Clarify your answer using diagrams showing the sizes of water and salt particles. 16 Explain why test tubes in a centrifuge are at an angle and not vertical.
17 Propose reasons why the paper element in an oil filter is folded as shown here.
paper element
Fig 3.2.8
[ Extension ]
Create
1 Design a simple device to stop leaves entering stormwater pipes after being washed down the spouting of a roof. Specify the separation technique that has been used. 3 Recycling aluminium, glass and plastic containers involves placing them together. Design a method to successfully separate these materials. Compare an industrial method such as a local recycler might use with your class method. 4 Examine the possibility of placing sugar and powered milk into a tea bag so that a cup of tea could be made even more quickly. Design a newspaper advertisement to promote the new product.
Investigate
2 a Kidney dialysis is an important application of the separation of materials. Explain what the process is and describe the benefits to our societys health. b Write a letter to a local dialysis centre and invite a representative to explain the process to the class.
72
UNIT
3.2
Prac 1 Unit 3.2
[ Practical activities ]
Filtration
Aim To filter a mixture to obtain a filtrate and
a residue 3 Fold the filter paper as shown in Figure 3.2.9 and place it in the funnel. Then place the funnel in the conical flask. 4 Tip the water/powder mixture into the filter paper.
filter paper funnel residue
Equipment
Crushed (powdered) coloured chalk and copper sulfate mixture, conical flask, beaker (100 mL), funnel, filter paper, stirring rod, safety glasses
conical flask
Method
1 Place the powdered mixture into the beaker, and add about 50 mL of water. 2 Use the stirring rod to mix the water and powder as best you can.
filtrate
Fig 3.2.10
Questions
1 Contrast the size of the copper sulfate particles with that of the chalk particles. Explain your observation. 2 Produce a magnified diagram explaining how the filtrate is trapped by the filter paper. Use different symbols for the solute and solvent particles. 3 Recommend a method that might recover the copper sulfate powder from the filtrate.
open out
Magnetic separation
Fig 3.2.11
Fig 3.2.9
Magnetic separation
Aim To separate a mixture using a magnet
Prac 2 Unit 3.2
Equipment
A mixture of sand and iron filings, a sheet of newspaper, a magnet in a plastic bag, empty container for iron filings, a sheet of paper
Method
1 Place the sheet of newspaper on a bench, then place a small pile of the sand/iron filings mixture on top. 2 Spread the mixture into a flat pile and place a sheet of paper on top. 3 Use the magnet in the plastic bag to carefully separate the mixture, placing the separated iron filings in a clean container as you go.
Questions
1 Explain why the sheet of paper was placed on top of the mixture. 2 Explain why the magnet was placed in a plastic bag. 3 Propose how a similar technique could be used in industry.
73
UNIT
3.2
3.3
context
Soluble substances are more difficult to separate out of mixtures than are insoluble substances. The methods used rely on the basic properties of matter, and are used in many industrial applications. These include making salt from sea water, purifying water for drinking, and even in forensics for working out who committed a crime.
UNIT
>>>
Distillation
Distillation also involves evaporation, but this time the evaporated liquid, called the distillate, is collected. Again, what remains in the original container is called the residue. Tap water contains several other substances, and so strictly speaking is not pure. Distillation is used to obtain pure or distilled water. A laboratory distillation apparatus is shown in Figure 3.3.2.
condenser
cold water in
distillate
Fig 3.3.2
A desert survival technique involves the collection of distillate using a sheet of plastic to trap water distilled from the ground or plants. Distillation is also used in the production of whisky (hence the term distillery) and perfume.
74
larger rock
Charcoal contains many fine pores that allow it to absorb many dangerous gases, and so is used in gas masks and breathing filters. Packages of food that must be kept free of moisture sometimes contain small sachets of silica gel, which can absorb nearly half their weight in water.
vegetation
Fig 3.3.3
Many different substances (called fractions) exist in crude oil. Fractional distillation uses the fact that these substances boil at different temperatures. This allows them to be separated into petrol and other substances as shown in Figure 3.3.4.
Fig 3.3.4
crude oil IN
Prac 2 p. 77
Fig 3.3.5
Chromatography
petroleum gases aviation gasoline petrol kerosene, jet fuel
090C
Chromatography is a technique that may be used to separate colours in inks, food dyes and other mixtures of colours. A medium such as blotting or filter paper containing a spot of the mixture is placed in contact with a solvent (e.g. water). Because different colours move at Prac 3 different rates through the medium, they p. 78 separate along the medium.
Worksheet 3.4 Using chromatography
400C heating oil diesel fuel lubricants, waxes furnace oil, bitumen
PREMIUM MOTOR OIL
500+C
Absorption
Absorption occurs when a material is taken in or swallowed by another. A kitchen sponge absorbs water. Special chemicals may be used to absorb particular substances from a mixture.
Fig 3.3.6
Paper chromatography can be used to separate the colours in ink.
75
UNIT
3. 3
>>>
UNIT
3.3
Distillation
[ Questions ]
13 The small silica gel packets inside various products carry a notice saying: DO NOT EAT. Propose why this warning is present. 14 Plan a sequence of steps for producing fresh water from sea water. 15 Identify a separation technique for each of the following situations. a A teacher has smelly feet. b Joe was cooking and dropped a bag of salt into a bowl of water. He wants to get the salt back, but not the water. c Mary wants to recycle water from her washing machine to make drinking water. d The police have three pens and want to find out which one was used to write an anonymous letter. e James want to breathe clean air, not paint fumes, while painting his house. 16 Explain why each of the separation techniques identified in question 15 would work.
Checkpoint
Evaporation and crystallisation
1 Copy and complete: When a solution evaporates, c_____ of solute may be left behind. 2 Describe what a salt pan is and what it is used for. 3 Describe how distillation is different to evaporation. 4 Sketch a diagram to illustrate the process of distillation. Explain what is happening at each step. 5 Identify three examples where distillation is used. 6 Define a fraction in distillation. 7 Identify three different fractions and their uses from Figure 3.3.4.
Absorption
8 Identify an example of something that absorbs a: a liquid b gas
Chromatography
9 Clarify the types of mixtures that chromatography is used to separate. 10 Explain how different colours move in chromatography.
[ Extension ]
Investigate
1 Water can be described as hard or soft. a Explain the difference between hard and soft water. b Form a team and design an experiment that will test the hardness of the tap water in your home. c Determine whether the water tested is DYO hard or soft. 2 a Investigate how you would make a solar still for use if you had run out of water in a desert area. b List the equipment that you would require. 3 When a cube of sugar is added to a clear glass of water you notice that there is a wavy area close to the dissolving cube. Over time this disappears. Explain this unusual feature.
Think
11 Copy and complete the table below to summarise the separation methods in this unit.
Separation method
Evaporating
Brief description
The mixture is boiled so that the solvent evaporates. This will leave behind the solute.
Example
Salt from sea water
12 Explain why salt is obtained from salt pans, rather than from boiling sea water.
4 Research why air bubbles form on the inside of a beaker when it is heated.
76
UNIT
3.3
Prac 1 Unit 3.3
[ Practical activities ]
Separation by evaporation
Aim To collect the dissolved substances from soft drink using evaporation
Prac 2 Unit 3.3
A simple distillation
Aim To collect a sample of pure water using distillation Equipment
Equipment
Bunsen burner, salt solution or soft drink, heat-proof mat, evaporating basin, tripod, gauze mat, safety glasses
Bunsen burner, gauze mat, heat-proof mat, conical flask, tripod, watch-glass, wooden test tube holder, salt solution, beaker, 3 paperclips, water, safety glasses
Method
1 Place a small amount of solution in the evaporating basin (half to one-third full) and place it on the gauze mat as shown here. Fig 3.3.7
Method
PART A The distillation 1 Assemble the apparatus as shown in Figure 3.3.8.
heat-proof mat
Fig 3.3.8 2 Use the watch-glass and beaker to collect distilled water. Save some of the salt solution for Part B of this activity. PART B Testing the distillate 1 Unfold the paperclips. 2 Dip one paperclip in the salt solution and then hold the dipped end of the paperclip in the blue flame of a Bunsen burner. What colour flame is produced? 3 Dip another paperclip in plain water and repeat the flame test. 4 Dip a third paperclip in your distillate and repeat the flame test.
2 Heat the solution, but turn off the Bunsen burner just before the last drop of water disappears (the heat remaining in the basin will be more than enough to finish evaporating the water). 3 Allow the crystals to cool. You may wish to stick a sample in your book under a piece of contact adhesive.
Questions
1 Describe what you saw as the water evaporated. 2 Explain why it is important to stop heating when the water is just about gone. 3 Predict where the water went.
Questions
1 Explain what the flame tests tell you about the distillate. 2 Present a reason for not using the same paperclip for all three flame tests.
77
UNIT
3.3
>>>
4 Repeat step 3 if necessary to spread rings of colour from the dot. Be patient. 5 Try different-coloured dots. 6 Instead of Textas, use the dye from Smarties. Place a drop of water on a Smartie to extract its colour, then use an eye dropper to collect some. Place a drop of dye in the centre of a piece of filter paper and repeat steps 1 to 5. 7 Compare results for different brands of felt-tipped pens or Smartie-type confectionery.
Water-based Textas, Smarties of various colours, eye dropper, water, beaker, filter paper
Method
1 Using a water-based Texta pen, make a dot in the centre of a piece of filter paper. 2 Place the filter paper on top of the beaker. 3 Using the eye dropper, place a drop of water on the dot of ink. Fig 3.3.9
Questions
1 Present a list of the colours in each Texta and Smartie you tested. 2 Explain why different colours spread at different rates. 3 Assess whether this experiment could be used to decide if a lolly is a genuine Smartie.
mL
eye dropper/water
1
filter paper
beaker
78
3. 4
context
Our water supplies and waste water are two mixtures that need to be treated very carefully. Removing unwanted impurities from drinking water is important to our health. Removing impurities from waste water is important to the health of the environment.
UNIT
Water supply
You may be surprised to learn that rainwater is a mixture, and is by no means a pure substance. Rain is produced when water evaporates from oceans, lakes and other bodies of water and even from plants and soil. Because it has been in contact with substances that dissolve in it, rainwater is a dilute mixture that must be treated before being supplied to our homes. Water from domestic rainwater tanks is generally not treated, as the potential for contamination is slight.
The rainwater that we normally drink has passed through an extensive water supply system, however, and must be treated to ensure it does not contain harmful levels of chemicals or bacteria. Treatment may involve the dissolving of the following substances in the supply.
Water consumption
The World Bank estimates that every person needs 5 litres of water for drinking and cooking per day, and an extra 25 to 45 litres per day to keep clean and healthy. It is estimated that Australians use around 57 litres each day quite a luxury compared to those in less fortunate countries.
Chlorine
Chlorine may be added in liquid or gas form to kill germs that can cause diseases such as gastroenteritis (gastro for short).
Fluoride
Fluoride is added to help prevent tooth decay in consumers of the treated water.
Electrolytes
Electrolytes trap suspended particles by causing them to clump together and fall to the bottom of the tank as sediment. These clumps are called floc, and the process is called flocculation. Figure 3.4.2 shows the basic stages of water supply. The service reservoir is an artificial structure that stores water for use during peak demand times. The stand pipe is used to provide increased pressure to high service areas.
Fig 3.4.1
Water is stored in reservoirs for up to five years to allow waste to settle out naturally before further treatment.
Prac 1 p. 84
Prac 2 p. 84
79
>>>
catchment area
storage reservoir
chlorination
fluoridation
pumping station
stand pipe
water mains
service reservoir
industry
sewage
treatment
ocean
Fig 3.4.2
80
Sewage
Many people get the terms sewage and sewerage mixed up. Sewage is the waste and water mixture that humans put down sinks, drains and toilets in their homes and in industrial processes. Sewerage is the word used to describe the network of pipes into which sewage passes. Some homes are connected to a septic tank, where sewage is broken down by bacteria and is released into the soil, leaving a thick sludge in the tank that must be removed periodically. Because a septic tank depends on bacteria, chemicals that may kill bacteria should not be allowed to pass into the tank. Most houses in city areas are connected to the sewerage network that leads to treatment plants and eventually to the ocean.
spouting
vent pipe downpipe laundry sink kitchen storm water system bath
Fig 3.4.3
Fig 3.4.4
81
UNIT
3.4
>>>
blowers
aeration tank sewage in screen chemicals added settling tank pebble filter
UV lamps outfall
ocean
Fig 3.4.5
out large objects. Then it flows to an aeration tank, where air is pumped into the tank to feed bacteria that help break down the sewage by feeding on it. The gas produced by bacteria as they break down sewage may be collected and used to power turbines for the aerators.
once A Japanese scientist burgers made promoted ham as an using treated sewage friendly food. environmentally Not surprisingly, the so-called poo-burgers never took off.
Poo-burgers
UNIT
3.4
[ Questions ]
Chemicals are also added to convert dissolved wastes into solids, which then fall to the bottom of the tank. The next stage is the settling tank, where gravity separation results in bacteria and other solids settling at the bottom in a thick sludge. Some of the bacteria may be returned to the aeration tank to help break down sewage. Next, the sewage passes into pebble bed filters where suspended solids are removed. UV light or chlorination is used to disinfect the sewage before it is released into the ocean. The sludge is removed and air dried before being stored for several years, after which some of it may be sold for use in soil and fertiliser products.
Worksheet 3.5 Using water wisely
Prac 3 p. 84
Checkpoint
Water supply
1 Rainwater is evaporated water. Describe some places where this water has been evaporated from. 2 Classify rainwater as either a mixture or a pure substance. 3 Account for how rainwater picks up impurities. 4 When treating water, which chemical is added to: a kill germs? b prevent tooth decay? 5 Explain the term flocculation.
Sewerage
6 Distinguish between sewage and sewerage. 7 Identify three items connected to the sewerage system in your house. 8 Explain what breaks down sewage in a septic tank. 9 Explain how the septic tank helps separate sewage. 10 Explain why air is blown into one of the tanks at a sewage treatment plant.
82
Think
11 Explain why more chlorine is required per litre in swimming pools than in our drinking water. 12 The catchment of a reservoir is the hills, creeks and rivers around the reservoir. Propose why it is important to look after the catchment of a water supply. 13 The forest in a catchment is often said to be like a natural filter. Explain what you think this means. 14 Justify why it is better to wash a car on your lawn than on the road. 15 Propose three ways that the sludge from a sewage treatment plant could be recycled or reused. 16 Predict what could happen if sewage was not treated before being released into rivers or the ocean. 17 Identify each separation technique used in the activated sludge process and describe what it removes from the sewage. 18 Propose a reason why basins around the house have S bends. Fig 3.4.6
[ extension ]
Create
1 Design a house that would assist people in country areas to use their house roofs to collect and use rainwater. 2 Why should people save water? Design and present a poster to promote reducing water waste in your home.
Investigate
3 Research and compare the amount of water used in various industrial processes (e.g. making paper, soft drinks, recycling). Present the data as both a table and a column graph. 4 Research the history of the sewerage system and its effects on public health. 5 Explain the term eutrophication and discuss its importance to farmers. 6 Research the composting toilet and produce an advertisement to sell this product. In your advertisement you must: a Outline how the composting toilet works. b Discuss its advantages and benefits. 7 a Define the term acid rain. b Describe regions of the world where acid rain is a problem.
basin
Action
8 Organise a representative from a local water treatment facility or sewage treatment plant to visit your class and talk about the importance of clean water.
Surf
9 Research the history of water treatment in Australia by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools selecting chapter 3, and clicking on the destinations button.
to sewerage system
83
UNIT
3. 4
>>>
UNIT
3. 4
Prac 1 Unit 3.4
[ Practical activities ]
Water purification
Aim To purify some dirty water for drinking Equipment
Ice-cream or margarine container, sand, stones, muddy water, beakers (2 x 250 mL), tripod, stirring rod
Prac 2 Unit 3.4
Method
1 Prepare the container containing sand and stones as shown in Figure 3.4.7. Fig 3.4.7
Method
1 Let the muddy water stand for a few minutes to separate out some sediment. 2 Decant some of the water into a filtering apparatus.
muddy water
3 Take the filtrate and add a few drops of one of the chemicals to be tested, stirring briefly. Note whether any flocculation occurs. 4 Test the other chemicals in this way.
Questions
1 Identify which chemical produced the most flocculation. 2 State which type of particles you think the chemicals that caused flocculation reacted withthose in suspension or those in solution. Explain why. 3 The clumped chemicals are referred to as the flocculent. Explain how you could remove the flocculent.
beaker
2 Pour half of your muddy water into the container, and keep half for later comparison. 3 Allow the filtrate to drain into the clean beaker long enough to collect a good sample of purified water.
Prac 3 Unit 3.4
Questions
1 Describe the effectiveness of the sand/stones filtration. 2 Design a method that could improve the purification (e.g. by adding stages to the basic method).
Artificial sewage mixture provided by your teacher (containing things like bread, chopped vegetable scraps, soil, sand, detergent, oil, grass clippings, coffee, paper, plastic etc.), other general science equipment depending on your method
Method
1 Design a method of treating your sewage sample. There may be several stages to your process. 2 Keep a small sample of treated and untreated sewage for comparison. 4 Clarify your process by describing the stages and their effectiveness.
84
Chapter review
[ Summary questions ]
1 Identify four mixtures found in the home. 2 Paint is removed from a brush using turpentine. Identify: a the solvent b the solute 3 Describe how a solution and a suspension are different. 4 Copy and complete: A substance that will not dissolve is said to be _____. 5 Give the correct scientific term for a: a weak solution b strong solution 6 Outline the process of: a sieving b filtration 7 Explain how crude oil is separated into several types of chemicals. 8 Identify three substances obtained from crude oil and specify two uses for each substance. 9 Identify the separation method used in gold panning. 10 Identify three uses for a centrifuge. 11 Identify the separation method in which charcoal is used. Describe how this technique works. 12 Define and explain chromatography. Identify how it is used in forensic science. 13 State what liberation is in mineral extraction. 14 Explain how rainwater can be used to pick up contamination. 15 Explain why fluoride is added to our water supply. 16 Explain why water in reservoirs is stored for several years before further treatment. 17 Define floc. 18 Explain why blowers are used in an aeration tank at a sewage treatment plant. 19 Describe how water may be disinfected in the final stages of treatment.
23 Explain how a coffee filter separates coffee from the ground coffee beans. Propose a method to separate the coffee from the ground beans if you ran out of coffee filters. 24 Predict which would dissolve faster in watera gram of cube sugar or a gram of castor sugar. Explain your answer. If you were performing an experiment to test this prediction, describe which factors must be kept constant. 25 A mineral water company requires a scientific demonstration to show that their water contains less dissolved mineral than its closest competitor. Design an experiment that could be shown on television. 26 If you suspected that the contents of a bucket contained sand, clay and salt all mixed with water, explain how you would: a remove all impurities in one attempt b remove only the sand c remove both the clay and the sand 27 Design a method by which you could check the amount of sugar dissolved in a certain brand of cordial.
[ Interpreting questions ]
28 Study the following data and answer the questions that follow.
Volume of water used = 100 mL Temperature of water (C) Maximum amount of copper sulfate that would disolve (grams)
0 18
20 22
40 29
60 38
80 50
100 78
[ Thinking questions ]
20 Explain what happens to a soluble solid when it dissolves in a liquid. 21 Water is a solvent for many substances. Identify suitable solvents for: a oil paint b grease c nail polish 22 Detergents are used when oil spills occur at sea. Discuss whether the detergent really cleans the water.
a Identify the solvent and solute. b Clarify what happens to the solubility as the temperature is increased. c Account for your observation in part b. d If the volume of water was doubled, predict what would happen to the amount of solute that could dissolve at 20C. Explain your answer. e Identify the type of graph that would best represent these results. f Draw a diagram to illustrate the experimental set-up you would use to collect the salt.
Worksheet 3.6 Mixtures crossword Worksheet 3.7 Sci-words
85
>>>
Cells
Key focus area:
By the end of this chapter you should be able to: explain what a cell is, using examples identify the parts of a cell and their function use a microscope correctly and prepare microscope slides explain the difference between unicellular and multicellular organisms, giving examples describe how cells reproduce describe some specialised cells and how they can arrange into tissues, organs and systems in living things describe the main systems of the human body.
4.1
context
Humans have always wondered what things are made up of. We pull apart pens and calculators to see what is inside. We try to look closer and closer to find out what tiny parts are inside larger objects. The microscope was invented to allow scientists to view extremely small things that are normally not able to be seen.
Without the microscope, scientists would not be able to study the tiny building blocks of life that we call cells. Knowledge about cells and their structure has allowed many important advances to be made in science and medicine. Microscopic is a term you have probably heard before. It doesnt just mean an object is small, it means so small that the only clear way of seeing it is by using a microscope. just one lens. A compound microscope, commonly used in schools today, contains two or more lenses. The compound microscope was invented by Hans Janssen and his son Zacharias and separately by Hans Lippershey in 1609, though some history books suggest that Janssens invention may date back to 1590. In 1665, Robert Hooke designed a prototype of the modern compound light microscope. The light microscopes of today are used to magnify specimens by as much as 1500 times.
barrel
Fig 4.1.1
arm objective lenses stage diaphragm mirror clips
base
Fig 4.1.2
A stereo microscope is one that has two eyepieces. These are more expensive than single-eyepiece microscopes, but provide a clearer and more three-dimensional image.
87
UNIT
UNIT
3.1
The microscope
>>>
Lowering a cover slip onto a wet mount
Fig 4.1.4
A stereo microscope
Fig 4.1.3
Using a microscope
Correct microscope use can help you see fantastic images that others may miss, so pay careful attention to the following. What you place under a microscope is called a specimen. What you see when you look through the eyepiece is called the image. To obtain a good image, we sometimes need to prepare the specimen first, by doing the following: Obtain a thin section by scraping, squashing, peeling or slicing the object. This allows more light to pass through the specimen into the microscope and to your eye. Place the specimen onto a glass microscope slide. Stain the specimen to make it darker and easier to see. Secure the specimen so it doesnt move easily. One way to do this is by using a wet mount. This involves placing the specimen on a glass microscope slide with a drop of water. Gently lower a thin glass cover slip onto the specimen and water by placing one edge of the cover slip down first. Use a piece of filter paper to soak up any excess water.
Sometimes air bubbles can become trapped under the cover slip and appear as circles when viewed under a microscope. Do not confuse air bubbles with what you are really trying to observe. Once the specimen has been prepared, you are ready to look at its image using a microscope. Follow these steps to protect the both the microscope and the slide from damage and to obtain a clear image. 1 Place the prepared slide on the stage and secure it using the clips. 2 Some microscopes have a built-in lamp. If your microscope doesnt, then face it towards a light source (this could be a microscope lamp or window). Adjust the mirror to project light through the stage to the specimen. 3 Select the objective lens with the lowest magnification and rotate it into place. (It is easier to start viewing with low magnification.) 4 While looking from the side (not through the eyepiece), adjust the coarse focusing knob so the objective lens is just above the specimen. Take note of which way you must turn the knob to move the objective lens away from the specimen.
People in science
Matthias Schleiden (18041881)
German botanist Matthias Schleiden, working with Theodor Schwann, proposed the basis of modern cell theory. Schleiden practised law before developing his hobby of botany into a full-time job. Schleiden studied the structure of plants using a microscope. Through these observations he noticed that the different parts of the plant were composed of cells or came from cells. He also recognised that the cell nucleus is important in cell division. Schleiden was one of the first German biologists to accept Darwins theory of evolution.
88
5 Look through the eyepiece and further adjust the mirror to obtain an adequate amount of light through the specimen. Turn the coarse focusing knob so the objective lens moves away from the specimen (remember the direction to turn from step 4) until you obtain as clear an image as possible. 6 Try to improve the sharpness of the image by turning the fine focusing knob. To obtain higher magnification, swap the eyepiece with another one or rotate an objective lens of higher magnification into place. Then repeat steps 4 to 6. The total magnification is obtained by multiplying the magnification of the eyepiece by the magnification of the objective lens being used. For example, if the eyepiece is labelled x 10, and the objective lens is labelled x 20, then the total magnification is x 200.
Fig 4.1.6
Fig 4.1.7
description. An actual view of material taken from the inside of a human cheek is shown in Figure 4.1.6 with a sketch of its main features in Figure 4.1.7.
An ant, magnified 125 times
Fig 4.1.5
The transmission electron microscope (TEM) was invented in 1930 by Ernst Ruska and made commercially in 1938 to aid in the study of metals. Instead of using light, this type of microscope uses a beam of tiny negatively charged particles called electrons that are transmitted through a thinly sliced specimen. An image is then produced and projected onto a screen for viewing. When it was found that the beam of electrons did not destroy specimens from plants and animals, biologists were able to use the electron microscope to gather more details than ever before. The transmission electron microscope can magnify up to around a million times, so it can reveal the delicate internal structure of cells and other specimens.
89
UNIT
4 .1
The microscope
>>>
How a scanning electron microscope works
magnetic deflectors (condensing lenses) focus the electron beam (like glass lenses focus light)
Fig 4.1.10
electron 'gun'
scan coils move the electron beam across the surface of the specimen display screen
computer
detector and amplifier electron impacts converted to electrical signal and sent to a display screen
Fig 4.1.8
Although first invented in 1942, the SEM did not become available commercially until 1965 due to problems with the electron beam. Specimens viewed with an SEM require less preparation but the images are not as detailed. Compare the images displayed in Figures 4.1.9 and 4.1.12. Many of the impressive super-magnified images seen in science magazines are obtained using an SEM. Although an SEM produces only black and white images (Figure 4.1.11), a computer may be used to add colour and so make more features distinguishable. Colour SEM pictures obtained this way are called false colour images (Figure 4.1.12).
TEM image of Giardia protozoa, a nasty bacterium found in contaminated water and guaranteed to make you ill (magnified x 1200)
Fig 4.1.9
A more recent development is the scanning electron microscope, or SEM, which moves a beam of electrons across the surface of the specimen and reconstructs an image, showing surface detail.
Fig 4.1.11
90
People in science
Antoni van Leeuwenhoek
In 1674, Dutch amateur scientist Antoni van Leeuwenhoek began writing articles describing amazing discoveries made with simple, hand-held, single-lens microscopes able to magnify from 50 to 100 times (compare this with the 40 to 50 times magnification of other compound microscopes that were common at that time). Leeuwenhoek made the first drawings of single-celled animals, bacteria, sperm cells (which he called animalcules) and red blood cells. His success was due to the quality of the single lenses he used. These produced much clearer images than those from compound microscopes that used multiple lenses of poorer quality and whose images were often blurred or had colour distortions.
Fig 4.1.12
UNIT
4 .1
[ Questions ]
Checkpoint
The light microscope
1 Define the following: a microscope b microscopic 2 Produce a diagram showing the main parts of a microscope. 3 Identify another name for the eyepiece. 4 Identify who invented the microscope and in what year was it invented.
Think
10 Name two types of compound light microscope. Identify which of the microscopes would give a finer, more detailed image of the specimen.
91
UNIT
4 .1
The microscope
>>>
15 A specimen is 0.2 mm long. Calculate how long it appears if it is magnified by 1000 times. 16 Construct a timeline of the history of the microscope using information from Unit 4.1.
12 State the approximate maximum magnification of: a a light microscope b an electron microscope
Skills
13 An image of a specimen obtained using a magnification of x 50 is shown below. Accurately sketch the image that would be obtained with a magnification of x 200. Fig 4.1.14
Analyse
17 Explain some advantages of the SEM over a transmission electron microscope. 18 Compare an SEM and a light microscope by listing their similarities and differences in a table.
[ Extension]
Investigate
1 Create a poster to teach other students how to use the microscope.
50
14 Sketch the following microscope specimens using the correct drawing technique. a
2 Research some other key people involved in the use and development of early microscopes, and give a brief presentation about their achievements. Choose from the following people: Galileo Galilei, Antoni van Leeuwenhoek, Giovanni Amici, Robert Brown, Matthias Schleiden and Theodor Schwann. 3 A micrometer is an instrument that measures extremely small objects. Describe how it is used. 4 Millimetre and micrometre are units often used when measuring small lengths. Identify what their symbols are. 5 Describe how specimens are prepared for viewing by an electron microscope. Present your findings in a flow chart.
Action
Fig 4.1.15 b
Onion cells
6 Construct a simple microscope that will allow you to view an object close up. You will find instructions on the Science Focus 1 Companion Website.
Surf
7 Find out more about light and electron microscopes by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 4, and clicking on the destinations button.
Fig 4.1.16
Muscle cells
92
UNIT
4 .1
Prac 1 Unit 4.1
[ Practical activities ]
Focus on the news
Aim To make a wet mount and view it using a
light microscope
Prac 2 Unit 4.1
Equipment
Microscope, microscope lamp, a section of newspaper containing small print, eye dropper, glass microscope slide, cover slip
Equipment
Microscope, microscope lamp, glass microscope slides, cover slips, eye dropper, small samples suitable for viewing under a microscope, such as a sugar crystal (both plain and caster), salt, copper sulfate, hair, clothing fibres, leaf, insect, writing sample (in ballpoint pen ink), mini grid (optional)
Method
1 Cut out a small section of newspaper filled with small print. 2 Prepare a wet mount containing the newsprint using the procedure described on page 88 and set the microscope to the lowest magnification. 3 Obtain a focused image of the newsprint. Sketch what you see. Record the magnification used. Count how many letters fit in the field of view. 4 Slowly move the slide containing the newsprint to the left, and note which way the image appears to move. Then note how the image moves when the slide is moved right, away from and towards you. 5 Repeat steps 3 and 4 but with a higher magnification.
Method
1 Observe a small specimen of each item under a microscope using the steps described on page 88. Specimens may not require wet mount preparation. 2 Sketch what you see in each case and record the magnification used to obtain the clearest image. 3 If you do not see an image, try shining the microscope lamp onto the surface of the object. Notice that this works very well with solid objects.
Questions
1 State how many letters fitted into the field of view at each magnification. 2 Compare the movement of the image to that of the actual specimen.
Questions
1 Describe in words how each specimen appeared. 2 Explain any observations that you did not expect. 3 Describe two ways in which a microscope could be used to solve crimes.
People in science
Robert Hooke (16351703)
Robert Hooke worked in many fields and was one of the greatest experimental scientists of the seventeenth century. Born in 1635, Hooke was educated at Westminster school and won a place at Oxford in 1653. In 1655 he was employed by Robert Boyle to construct an air pump. Five years later, Hooke discovered the law of elasticity, known as Hookes law. In 1665 he published a book, entitled Micrographia (meaning small drawings), in which he first used the word cell to name the microscopic cavities in cork. Hooke developed several techniques for improving the quality of compound microscopes. He was the first to state in general that all matter expands when heated, and that air is made up of particles separated from each other by large distances. Hooke also achieved fame as chief assistant to Christopher Wren, helping to rebuild London after the Great Fire of 1666. Robert Hookes other significant achievement was in the field of astronomy. He constructed one of the first Gregorian reflecting telescopes and was first to suggest that the planet Jupiter rotated on its axis. He made extremely detailed sketches of Mars which were used 200 years later to investigate its rotation. In 1678 Hooke stated a law to describe how the planets moved, a law that Isaac Newton later used in modified form. Hooke thought that he was not given enough credit for the law and became involved in a bitter disagreement with Newton.
93
UNIT
4 .1
4. 2
context
In 1663, the English scientist Robert Hooke discovered cells in cork. This is a special bark that is often used to stopper wine bottles and is similar to, but thicker than, the paper-like bark that you often find on trees in the park or school grounds.
Cells may be thought of as the building blocks of life, and come in an amazing variety of types and sizes. Skin, muscles, blood and plants are all made up of different types of cells. Most cells are so small that hundreds would fit on a full stop. Our bodies contain over a hundred million, million cells. An example of a very large cell is a hens egg.
A hens egga really big cell!
UNIT
>>>
Discovering cells
Using an early microscope, Hooke studied many different objects including feathers, the stinger of a bee and the foot of a fly. When he placed a thin strip of cork under his microscope he saw empty box-like shapes that he thought looked like the small rooms, or cells, occupied by monks of the time. It was logical then to call these box-like shapes cells too. It was not until nearly 200 years later, in 1839, that German biologists Theodor Schwann and Matthias Schleiden proposed the cell theory of life. This theory states: 1 All living things, or organisms, are made up of cells. 2 New cells are created by old cells dividing in two. 3 All cells are similar to each other, but not identical.
Fig 4.2.2
Fig 4.2.1
The simplest type of cell is a bacterial cell. Bacteria (sometimes called germs) are tiny cells that can have either good or bad effects. There are different types of bacteria that help us digest food, break down dead plants and animals in soil, and cause disease.
94
Fig 4.2.3
cell membrane
bacilli
Fig 4.2.5
spirilla
Animal cells
Cells from animals such as humans, pigs or frogs have several Cells from cells? organelles in common. Until 1855 it was 1 Cell membranethis is a thought that cells could thin, flexible outer layer that appear spontaneously from anywhere. Then encases the cell and controls a German physician, what goes in or comes out. Rudolph Virchow, found 2 Cytoplasmthis jelly-like that living cells can liquid fills most of the cell only come from other living cells through and contains hundreds of reproduction. different chemicals. New substances are made and energy is released and stored here. Think of the cytoplasm as the chemical factory of the cell. 3 Vacuolesthese are storage areas that may contain air, water, wastes and food particles. Animal cells often contain several small vacuoles. 4 Cell nucleusthis is the control room of the cell containing the genes composed of DNA. Each gene contains the information responsible for the production of chemicals. These chemicals control chemical reactions in a cell, and how the cell develops and functions. The genes contain instructions in chemical codes for building new cells. 5 Mitochondriathese small objects may be thought of as energy capsules. Each mitochondrion uses sugar and oxygen in a series of chemical reactions to release energy. Mitochondria are so small that they cannot usually be seen using a light microscope. Mitochondria were first described in muscle cells by Rudolph von Kolliker, a Swiss anatomist and physiologist, in 1857.
cytoplasm
flagellum
Fig 4.2.4
There are two main types of cellsanimal and plant cells. Each cell is made up of parts called organelles. Each organelle does a separate job inside the cell.
95
UNIT
4 .2
>>>
a green chemical, chlorophyll, which traps the light energy plants need for photosynthesis. The cell wall contains a tough fibrous material called cellulose and provides the support needed by the plant cell. Plant cells contain a single large vacuole filled with cell sap.
Worksheet 4.1 Cell diagrams
Prac 1 p. 98
Fig 4.2.8
Plant cells
Fig 4.2.6
Plant cells
As stated in the cell theory, all cells are similar but not identical. Plant cells have several features in common with animal cells, but there are also some differences. Unlike animals, plants need to make their own food with the help of sunlight, carbon dioxide and water. They do this in a process known as photosynthesis. Photosynthesis occurs in organelles called chloroplasts inside leaf cells. Chloroplasts may be seen using a light microscope. Chloroplasts contain
A plant cell showing the main organelles
People in science
Theodor Schwann (18101882)
Theodor Schwann was a German physiologist who said that the cell was the basic unit of an animals structure. In 1836, while investigating digestion, he isolated a substance responsible for digestion in the stomach and named it pepsin. He also observed the formation of yeast spores and said that the fermentation of sugar and starch was the result of yeast reproduction. In 1839 Schwann extended Matthias Schleidens work on plant cells to include animal cells. Together they proposed the cell theory of life. Schwann was the first to use the term metabolism for the chemical changes that take place in living tissue. Schwann also observed that an egg is a single cell that eventually develops into a complete organism.
Fig 4.2.7
large vacuole containing cell sap
cell nucleus
cell membrane
mitochondrion
96
UNIT
4 .2
[ Questions ]
17 The digestive systems of sheep, cows and rabbits contain special bacteria which help break down a substance found in cell walls that humans are unable to break down. State which substance this might be.
Checkpoint
Discovering cells
1 Identify who first used the term cell to describe the small structures in a slice of cork. 2 State when Schwann and Schleiden proposed the cell theory. 3 Write three points to briefly describe the cell theory. 4 Identify the simplest type of cell.
Analyse
18 Construct a table like the one shown here to compare animal and plant cells. Make sure you include some similarities and some differences.
Animal cells
5 Identify the part of a cell that could be called: a the control room b the chemical factory c the gatekeeper d the powerhouse e the walls 6 Identify three types of body cells.
Feature Animal cell Plant cell
19 Plant cells need to have thicker walls than animal cells. Explain why. 20 Explain why there are fewer types of plant cells than animal cells.
Plant cells
7 Identify the green substance in plant cells and state its function. 8 Clarify the following terms related to plant cells: a photosynthesis b cell wall c cellulose 9 Identify three differences between plant and animal cells.
[ Extension]
Create
1 Construct a 2D or 3D model of a plant or animal cell using any materials you can find.
Think
10 Compare an organelle in a cell to an organ in the human body. How similar are they in what they do? 11 Clarify the term organism. 12 Identify how big cells are. 13 State how many cells our bodies are thought to contain. 14 Draw a diagram of an animal cell and a plant cell side by side. Compare the cells by labelling the parts that are common to both with one label. 15 Muscle cells contain large numbers of mitochondria. Explain this observation. 16 Identify the contents of a vacuole if it is in a: a plant cell b animal cell
Investigate
2 Investigate the dates of key discoveries relating to the microscope and cells. Include those covered in this chapter and others that you research. Draw a time line using this information.
Surf
3 The confocal microscope is currently being developed by an Australian company. Investigate this new type of microscope and how it may be used to observe skin cells without the removal of skin from the body. Make your investigation easier by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 4, and clicking on the destinations button.
97
UNIT
4 .2
>>>
UNIT
4 .2
Prac 1 Unit 4.2
[ Practical activity ]
Onion and banana cells
Aim To observe and draw plant cells Equipment
A microscope, potassium iodide stain, lamp, filter paper, glass microscope slide, eye dropper, water, cover slip, onion skin, banana sample, wooden spatula (an icy pole stick is ideal)
Extension
1 Try to obtain a view of rhubarb cells by first peeling some of the outer layer from a piece of rhubarb.
Questions
1 Explain why stain was recommended when viewing banana cells, but not for onion cells. 2 Identify which cells were easier to observe. 3 Describe some of the similarities and differences you observed between banana and onion cells. 4 If you were able to see rhubarb cells, describe them.
onion skin
drop of water
Fig 4.2.9
98
4.3
The first cells on Earth were very similar to the simplest cells we find on Earth today, called bacteria. Bacteria have only one cell each. Each bacterial cell does everything needed to keep the bacterium alive. In more complicated organisms, cells live together in groups or colonies. In these colonies the cells are specialised. Specialised cells in colonies do particular jobs which could not be done by single cells living alone. Some cells, for example, specialise in swimming and others in feeding. The larger a plant or animal is, the more specialised cells it contains. The human body is made up of billions of cells, of which there are about 200 different, specialised types.
UNIT
context
bone cell
Fig 4.3.1
Leeuwenhoek discovered many types of cells. He was the first to see single-celled, living organisms in 1674. Imagine his excitement when he looked through his microscope and saw protozoa moving around! Then in 1683 he discovered bacteria, which were even smaller than protozoa!
Fig 4.3.2
A coloured SEM image, magnified 3000 times, of red and white blood cells
99
Specialised cells
SEM image of sperm cells and an egg cell
>>>
Fig 4.3.3
When plants take in carbon dioxide they give out oxygen and also lose a little water from their leaves. Special guard cells on the underside of a leaf open and close small openings called stomata to reduce this water loss. Stoma is the term for a single stomata. Water is absorbed from soil by root Prac 1 p. 102 hair cells.
Single-celled organisms
While humans contain more than 200 different types of cell, there are some primitive forms of life that are made up of only a single cell. These organisms are called unicellular, meaning one cell. This cell carries out all the required functions such as food intake and movement.
Expert survivor
The single-celled organism Chlamydomonas can grow a thick wall to survive severe drought, where it may blow around like dust in the wind and reactivate when conditions are more favourable.
Plant cells
Plants also contain different types of cells that perform different functions. Several types of specialised plant cell are shown in Figures 4.3.4 to 4.3.8. A layer of cells near the top of a leaf does most of the photosynthesis. Chloroplasts in the cell use energy nucleus from the Sun to convert carbon dioxide and water into glucose. This is then used as food for the chloroplasts plant. Oxygen is made as a waste material. Special conducting cells form tubes or pipes that transport water and nutrients to all parts of the Photosynthetic cell Fig 4.3.4 plant.
Fig 4.3.5
Conducting cells
guard cell
nucleus soil
Fig 4.3.6
Fig 4.3.7
100
Fig 4.3.8
Perhaps extraterrestrial life No sex please, includes not little green were amoebae! amoeba reproduces without The people, but different types of sex, in a process called binary unicellular organisms! There fission in which the cell nucleus is currently scientific debate splits in two first, followed by about what appear to be the cytoplasm to produce a copy of the original cell. primitive organisms found in meteorites from Mars. You can usually find unicellular organisms in a drop of pond water viewed under a microscope. Because some single-celled organisms show both plant and animal characteristics, they are often classified not as plants or animals, but as protists. Different types of protist include: 1 flagellatesthese have a long, whip-like tail or flagellum that helps them move 2 ciliatesthese move due to a wave-like beating of tiny hairs (or cilia)
3 amoebasthese have no definite shape but flow rather than swim 4 sporozoansthese generally dont move themselves, but exist in other cells. The potentially deadly disease malaria is caused by a sporozoan that lives in blood cells. The disease may be transferred when a mosquito passes on infected blood. Not all unicellular organisms cause disease many are important parts of the food chain.
Fig 4.3.9
Prac 2 p. 102
nucleus
nucleus
cell wall
UNIT
4 .3
[ Questions ]
Plant cells
4 Identify four types of specialised plant cells. 5 Describe what would happen to a plant without guard cells. 6 The cells on a leaf that specialise in photosynthesis are found only on the upper surface. Explain why.
Checkpoint
Different types of human cells
1 State the type of human cells that: a help keep out infection b send messages from brain to muscle c carry oxygen d assist with movement 2 Draw two different types of human cell and state their function. 3 State approximately how many different types of specialised cells there are in the human body.
Single-celled organisms
7 State another name for a single-celled organism. 8 Identify four types of unicellular organism. 9 Identify a disease caused by a unicellular organism.
>> 101
UNIT
4.3
Specialised cells
>>>
17 Two types of conducting cells form vessels that are grouped together in a plant. Explain why this is a good idea. 18 One type of protist has something in common with plants. Identify which protist it is and what it has in common.
Think
10 Construct a diagram to explain how an amoeba reproduces. 11 Draw labelled diagrams of two different protists to clarify their structures. 12 Describe a flagellum. 13 Identify which type of protist moves by beating many hair-like structures.
[ Extension]
Investigate
1 Many diseases are caused by protozoa, including malaria. Construct a brochure to be placed in a doctors clinic to teach others about malaria. Your information should include: a the cause of the disease b the signs and symptoms of the disease c who is most likely to get the disease d methods to prevent infection e possible cures or treatments.
Analyse
14 Identify the first single-celled organisms. 15 Explain how the functions that cells performed changed when they began to form colonies. 16 There are benefits and disadvantages in having specialised cells doing different jobs. a List some advantages and disadvantages of having specialised cells. b List some advantages and disadvantages of having one cell doing all jobs in a living thing. c Evaluate whether it is better to be a single-celled organism or to be made up of lots of specialised cells.
UNIT
4 .3
Prac 1 Unit 4.3
[ Practical activities]
Viewing prepared slides
Aim To observe prepared microscope slides of specialised plant and animal cells Equipment
Prac 2 Unit 4.3
Prepared slides of various specialised plant and animal cells, microscope, lamp
Method
1 Observe a prepared slide using a microscope. 2 Sketch the image and label your sketch. Include the name from the slide and the magnification used. 3 Repeat with several different slides of plant and animal cells.
Method
1 Place a drop of pond water onto the glass microscope slide and cover it with a cover slip. 2 Use a microscope to obtain a view of the life within the drop of water. 3 Sketch as many different organisms as you can.
Questions
1 Compare the slides, looking for any similarities and differences. 2 Explain the advantages of using prepared slides rather than obtaining your own specimens. 3 Describe the features within the cells that you were able to observe.
Questions
1 State how many different organisms you saw. 2 Explain how they appeared to move. 3 If possible, identify and name each type of organism.
102
4. 4
context
People in a group can perform more complex tasks than one person alone. Like people, the different specialised cells in our bodies are organised into groups to help them work more effectively.
heart muscle cell
UNIT
Fig 4.4.1
Fig 4.4.2
Failure of cells to divide properly during early development led to this Siamese snake.
103
Groups of cells
>>>
History of science
Cloning cells
One of the great moments in the history of science was the cloning of Dolly the sheep. Professor Ian Wilmut and his team were the first to clone an animal from the cell of another adult animal. This took place at Roslin Institute, near Edinburgh in Scotland, during 1997 after many years of research. Dolly was made using a body cell taken from the udder of another sheep. Cloning is the process of creating a copy of an organism by placing the contents of a cell from the original animal into a donor cell which is then implanted in a surrogate mother and allowed to develop into a complete animal. Dollys birth sparked a debate about the ethics of cloning and a rush by other scientists to copy the method used to clone her. Dolly was later diagnosed with a number of diseases including arthritis, and was put down when six years old after it was found she had developed a deadly lung disease. Sheep like Dolly normally live to 11 or 12 years and critics of cloning have warned that her early death is proof of the dangers of attempts to clone humans. After a post-mortem examination, Dolly was stuffed and put on public display at a Scottish museum. It is possible that particular animals such as pigs may be cloned. The advantage here is that their hearts might be suitable for transplant into humans suffering from terminal heart disease. There are, however, many ethical and religious concerns with cloning. In many cases the law is yet to catch up and rule on these concerns. Although a great moment in science, cloning has led to many new developments and is now just a link in the chain of scientific discovery and human development.
donor nucleus reprograms cell stem cell from donor sheep embryo donor nucleus injected into egg implant in surrogate
clone
remove DNA
Fig 4.4.3
Fig 4.4.4
Systems
A group of organs that work together is called a system. For example, in humans and animals, groups of muscles work together to form the muscular system. Some other human body systems are described briefly here and will be studied in more detail later in this series.
Several systems together form an organism, or living thing, such as a human. In humans, the nervous system includes the brain, spinal cord and nerves. The brain and spinal cord are referred to as the central nervous system; they send and receive messages which are carried by the nerves as a series of electrical signals and chemical changes.
104
Lung Heart
female
male
Fig 4.4.5
Fig 4.4.6
Fig 4.4.7
Fig 4.4.8
The circulatory system comprises the heart and blood vessels that carry food and oxygen to cells. Waste materials in the blood are transported to other organs for separation before being removed from the body. The digestive system includes the stomach and intestines and breaks down food into substances small enough to be absorbed into the bloodstream. Some separation of waste materials also occurs here. The reproductive system produces sex cells and contains the organs required for sexual reproduction. In a woman, this includes the uterus (sometimes called the womb), where a baby develops. The respiratory system includes the trachea (or windpipe), lungs and diaphragm. The respiratory system is where oxygen is transferred to the blood for circulation to other parts of the body. Carbon dioxide is expelled from the lungs when we breathe out. Excretion is the removal of waste from the body. The lungs expel carbon dioxide and the skin excretes sweat, but the main body system involved in excretion is the urinary system. Here, the kidneys filter out wastes from the blood and control the amount and contents of body fluids, producing urine in the process.
Fig 4.4.9
Fig 4.4.10
The skeletal and muscular systems work together to provide protection, movement and support for the body.
Worksheet 4.4 The human skeleton
105
UNIT
4.4
Groups of cells
>>>
Plant systems
skull (cranium) frontal muscle temporal muscle chewing muscle (masseter) neck muscles jawbone (mandible) neck vertebrae
collar bone (clavicle) shoulder blade (scapula) rib cage back (lumbar) vertebrae lower arm muscle (brachioradialis) main forearm bone (ulna) small forearm bone (radius) hip bone (pelvis) wrist bones (carpels) thigh bone (femur) kneecap (patella) small shin bone (fibula) main shin bone (tibia) foot bones (tarsals) thigh muscle (sartorius) abdominal muscle (rectus abdominis) shoulder muscles (pectorals)
Plants are also made of cells which group together to form organs and systems. Leaf cells group to form a leaf, which is an organ of the plant. Several leaves form a food-making system for the plant. Other plant systems may include: a reproductive system consisting of the parts of a flower a food and water transport system consisting of a network of veins a food storage system in the form of a bulb a root system for securing the plant in the ground and obtaining water and nutrients from the soil. These plant systems are studied in more detail later in this series.
Systems
4 Describe what is meant by the term body system.
Fig 4.4.11
UNIT
4.4
5 Copy and complete the table below to summarise the six body systems.
[ Questions ]
Body system List of its parts Brief description of what it does
Checkpoint
Cells, tissues and organs
1 Clarify what the word zygote means. 2 Copy and complete, using the words tissue, organ and cells (one word is used twice): Many ______ form ______. Groups of ______ make up an ______.
106
Think
6 If a cell is represented by a circle (shown in diagram A), select the diagram (from B, C, D or E) that best represents: a tissue b an organ c a body system Note that each answer is different. 7 Identify which body system is the main one involved in each of the following situations. a Your face goes red after you run for a kilometre. b Your leg moves up after you are tapped on the knee. c You need to go to the toilet. d You feel full after a meal. e You gasp for air after swimming under water. 8 Look at each body system on page 105 and name at least one organ in each system.
Fig 4.4.12
Fig 4.4.13
Pivot joint
Fig 4.4.14
Hinge joint
Fig 4.4.15
9 Where in the human skeleton would you expect to an example of each of the joints shown above? 10 Study the plant diagram in Figure 4.4.16 and state which part contains each of the following systems. a reproductive system b food-making system Fig 4.4.16
c food and water transport system d water absorption and anchoring system e food storage system 11 Describe what you think the term locomotion system in humans means.
[ Extension]
Investigate
1 Investigate the endocrine system and produce a small chart showing the main glands of the endocrine system and their function.
flower leaf
Surf
2 Find out more about body systems by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 4, and clicking on the destinations button. Choose a body system and examine in more detail how it works. Produce a PowerPoint presentation or poster to show your findings.
bulb roots
107
UNIT
4.4
Skin cells
Nerve cells
Muscle cells
Fig SF4.1
Stem cells taken from an embryo can be grown into many types of specialised cells.
Researchers think that there is the potential to collect embryonic stem cells and grow them into any form of specialised cell (see Figure SF4.1).
Sperm
Blastocyst
Foetus
Human
Egg
Stem cells
108
The future
Unfortunately it appears that when born, or shortly after, humans lose the last of the stem cells that are capable of growing into new nerve cells. This is why humans cannot repair damage to the brain or spinal cord. It is because embryonic stem cells can grow into so many different tissues, including nerves, that many scientists and members of the community strongly support further research. Scientists working on mice have already shown that a cut spinal cord can be repaired using embryonic stem cells injected into the ends of the damaged spinal cord. In a human, a damaged spinal cord can result in paraplegia (loss of use of the legs) or, when a broken neck occurs, quadriplegia (loss of use of both the legs and arms). There are currently no successful treatments for these injuries. Stem cells may also have other medical applications such as: growing new organs for someone who needs a transplant growing new body parts to replace those lost in an accident repairing damage to the brain from diseases that cause the brain to slowly stop working, like Parkinsons disease
The process of using stem cells to treat a human condition
repairing damaged heart muscle after a heart attack growing new skin for burns victims. Scientists are also researching whether adult stem cells can be used for these purposes, and are having some success. But it is still embryonic stem cells that offer the most potential.
Fig SF4.4
Fig SF4.3
The government has said that scientists can use embryos left over from IVF (in vitro fertilisation) for stem cell research in the future. The following comments on the use of embryonic stem cells were made by some well-known Australian scientists. The Australian Academy of Sciences Professor John White argues that we should use embryonic stem cells, because stem cells that are now being used are not good enough. Professor White argues that while much can be learned from animal experiments, experiments in human cells are needed now. IVF pioneer and stem cell researcher Professor Alan Trounson of the Monash Institute of Reproduction and Development supports the use of stem cells from spare IVF embryos. He thinks Australia should lead the way in this research.
109
Sir Gustav Nossal supports the need for (more) animal research. He said there is a huge amount of learning to be done in mouse experiments before embryonic stem cells can be used in humans. He expects it will take at least 10 to 15 years before embryonic stem-cell therapies become available. Dr McCullagh, formerly of the Australian National University, is a specialist in transplantation and foetal development. He believes we should find ways to use the stem cells that are already in our bodies. Dr McCullagh said that he does not agree with destroying human embryos for research.
Fig SF4.5
[ Student activities ]
1 a Use the Internet and newspapers to gather reports on some experiments being carried out with stem cells. b Use the information collected to outline what is being studied. 2 Create a poster or cartoon strip to explain to people what embryonic stem cell research is about. 3 Investigate the stem cell debate by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 4, and clicking on the destinations button. Use the available sites and any other material to answer the following questions. a List the advantages and disadvantages of stem cell research. b Investigate why some in the community are concerned about stem cell research. c Produce a survey to analyse public opinion about stem cell research. Test your survey on your classmates, parents or the community and write a brief summary of your results. d Evaluate the information you have collected and make a decision. Do you support embryonic stem cell research? Give reasons for your answer.
4 Research has shown that adults may have some remaining stem cells that can be used for research. Despite this there is still strong support for using embryonic stem cells. a Investigate and list the advantages of using embryonic stem cells over adult stem cells. b It might be better for a person who has a particular medical problemto use their own stem cells rather than embryonic stem cells. Do some research to explain this idea. 5 Hold a class debate on the topic: Research into embryonic stem cells can provide enormous benefits and should continue.
110
Chapter review
[ Summary questions ]
1 What is a compound microscope? 2 State two rules you should remember when using a microscope. 3 List the main parts of the microscope from its top to its base. 4 State the type of material Robert Hooke was looking at when he coined the term cells. 5 Sketch a bacterium, showing its main parts. 6 Sketch an animal cell and label its parts. 7 Sketch a plant cell. Label its parts. 8 Explain the purpose of each of the following cell organelles. a cell membrane b cell wall c cytoplasm d vacuole e cell nucleus f chloroplasts 9 Explain what a specialised cell is. 10 Name three types of human cells and state what job each does. 11 Name two specific protists, and state which type of protist each one is. 12 Identify whether a protist is a multicellular or unicellular organism. 13 Describe two different types of plant cell, and what each does.
Date
1609
17 Identify two features that plant and animal cells have in common. 18 Copy and complete the following table to summarise the history of cells. Include as many scientists as you can find throughout this chapter.
Scientist
Hans Janssen and his son
Discovery
Invented the compound microscope
[ Interpreting questions ]
19 a Use examples to distinguish between unicellular and multicellular organisms. b List the advantages and disadvantages of an organism being multicellular. c List the advantages and disadvantages of an organism being unicellular. d Evaluate whether unicellular or multicellular organisms have a greater advantage in terms of survival. e Are humans unicellular or multicellular? Explain your answer. 20 Identify which of the words below involves: a the most cells b the least cells tissue, body system, organ 21 Choose two body systems and describe them briefly. Include a simple diagram that shows the main parts of the systems. 22 Re-read the information about Leeuwenhoek on page 91 and assess the value of his discoveries. Give reasons to support your answer.
Worksheet 4.5 Cells crossword Worksheet 4.6 Sci-words
[ Thinking questions ]
14 Calculate the overall magnification for a microscope with a 20 x eyepiece and a 50 x objective lens. 15 Explain why it is important to develop different types of microscopes. 16 State the names of two different types of microscopes and explain the benefits of each to society.
111
>>>
By the end of this chapter you should be able to: identify different forms of energy and objects that have energy use models to describe different forms of energy describe how energy is changed from one type to another describe sound and light as different forms of energy identify how heat is lost and gained and describe how this can be controlled identify and describe how the understanding of energy is used in technological development.
1 Give three examples of energy. 2 Why do you feel cold when you
jump into a pool that is at the same temperature as the surrounding air?
5.1
context
On 16 July 1945, scientists exploded the first atom bomb. For the first time the atom was split in a nuclear reaction that released a huge amount of energy very quickly. This enormous explosion was seen 400 kilometres away, and the shock wave was felt 80 kilometres away. The energy released was made up of different forms including heat, light and sound. This single event changed our lives forever. So what is this thing called energy?
the ground has potential energy because gravity is trying to pull it down. When we release stored or potential energy it is often changed into kinetic energy. Kinetic energy is energy of motion. All moving things have kinetic energy. We are using kinetic energy every lunchtime when we play handball, train for netball or just sit around talking. All energy is measured with the same unit. This unit is called the joule and has the symbol J. The symbol is commonly seen on food packaging where the units are in kJ, which represents kilojoules or 1000 joules.
UNIT
What is energy?
Playing football or netball or climbing a mountain requires hard work and uses of a lot of energy. We can simply say that energy is the ability to do work. There are two main types of energy: potential energy and kinetic energy. But these can take many different forms. Potential energy is stored energy. The energy in food, a stretched rubber band, petrol or a battery is stored inside the material. Anything that is held above
Jack in the boxthe potential energy of the compressed spring is changed into kinetic energy as the box is opened.
Forms of energy
Potential and kinetic energy can exist in many different forms, as shown in Figure 5.1.2.
Fig 5.1.1
People in science
James Joule (18181889)
James Joule was a British physicist who found that rather than energy being lost or destroyed, various forms of energy are changed from one form to another. This is the law of conservation of energy. Joule was born in Manchester in 1818 to a wealthy brewery owner. From 1834 to 1837 the chemist, John Dalton, taught him privately at home. In 1838 he began experimenting in a laboratory equipped at his own expense at the brewery. In 1843 he determined the amount of work required to produce a unit of heat, now known as the Joule. In 1852 Joule, along with William Thomson, discovered that when a gas expanded, the temperature fell. This effect was later used to make refrigerators. In 1875 Joules money ran out and he died in 1889 after a long illness.
113
Energy
>>>
a. Electrical
b. Gravitational
c. Elastic
d. Nuclear
e. Light
f. Heat
g. Chemical
i. Kinetic
Fig 5.1.2
Energy transformations
Energy can be changed or transformed from one kind of energy to another. Most machines and appliances operate because they are able to change energy into another type, and then use this energy to do work. Some examples of energy changes or transformations are shown in Figure 5.1.3. The lighting of a match is one example of an action that involves many energy changes. First, moving our hand to strike the match involves kinetic energy. This is turned into heat and sound energy caused by the friction of the moving match head against the side of the box. The heat energy from the friction causes a chemical reaction to begin. This releases the chemical potential energy stored in the match head and wood as light Prac 1 Prac 2 p. 117 p. 117 and heat energy.
Fig 5.1.3
114
50 J Light energy
100 J Motion Electrical energy 1000 J 100 J Sound 200 J Light 600 J Heat
Energy conservation
For all energy there is a chain of energy changes, like the process we described for the match. In fact, energy can never be created or destroyed. It can only be changed from one form to another. This is the law of conservation of energy. Sometimes it appears that energy is lost, but when you look closer you find that the energy has gone into other forms, such as sound, heat or light. Some energy changes are shown in Figure 5.1.4.
Energy changes for a light globe and a toaster
Fig 5.1.4
UNIT
5.1
[ Questions ]
Checkpoint
What is energy?
1 Clarify what is meant by the term energy. 2 Identify the two main types of energy. 3 Explain the two types of energy in your answer to question 2, giving an example of each.
Forms of energy
4 List all the forms of energy shown in Figure 5.1.2. 5 Identify an example of each energy form you have listed.
Energy conservation
12 State the law of conservation of energy. 13 Clarify what we really mean when we say that energy is lost. 14 We burn petrol in a car engine to get the car moving. A lot of energy, however, is wasted. Identify two forms of energy into which this lost energy is converted.
Energy transformations
6 Clarify what is meant by the term energy transformation. 7 Construct a flow chart to summarise the energy changes when a match is lit.
>> 115
UNIT
5.1
Energy
>>>
Think
a Not all the energy that is stored in the water at the start is turned into electricity at the end. Some people could say that energy is lost in each stage of making electricity. Explain where this lost energy may go at each stage of the process above. b Identify a better term to replace the word lost. c Describe the energy changes that could occur as a person at home turns on the television and uses the electrical energy.
15 Describe the energy transformations that take place when an atomic bomb explodes. 16 Describe the energy transformations that take place in the following situations. Remember, the energy may be transformed more than once, and to more than one type or form of energy. a toaster b light globe c Discman d car engine e a person parachuting out of an aeroplane f a person doing a bungee jump g a student riding a bicycle, starting from rest 17 Solar panels capture the Suns energy and turn it into electricity. Explain why solar panels are similar to plants.
Create
20 Construct a model of a simple device that transforms energy from one type to another. Present your model to the class and explain the energy transformations involved.
Energy transformation a b c d e f g h
Chemical potential heat and light Light heat Chemical potential electrical light and heat Chemical potential kinetic and heat Gravitational potential kinetic sound (and heat) Chemical potential kinetic gravitational potential Elastic potential kinetic Kinetic heat and sound
Situation
Jack in the box Torch Cup falling off the bench Car braking Person running Solar hot water heater Crane lifting an old car Burning wood in a fire
Analyse
18 For each of the energy transformations listed in the table, identify which situation it belongs to. 19 The following energy transformations occur in a hydro power station. Study each stage of the process and answer the questions that follow.
Water stored in dam high up in mountains (gravitational potential) Water falls down pipes (kinetic) Water turns turbine (kinetic) Turbine produces electricity (electrical)
[ Extension ]
Investigate
1 Investigate the energy changes that occur in a coal power station. Draw a flow chart to present your information. 2 Identify 10 devices in your home that transform energy and write down the energy transformations for each.
Surf
Find out more about the following science applications by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 5, and clicking on the destinations button. 3 Investigate renewable and non-renewable energy sources that we use to make energy for everyday living. a Construct a table to show the advantages and disadvantages of each energy source. b Evaluate each energy source and decide whether it is suitable to use in the future. Give reasons to support your decisions.
116
UNIT
5. 1
Prac 1 Unit 5.1
[ Practical activities ]
Popcorn
Aim To use heat energy to change the stored energy in corn into sound and motion Equipment
Popping corn, small saucepan with lid, Bunsen burner, cooking oil
Prac 2 Unit 5.1
Chemical energy
Aim To perform an energy transformation Equipment
Test tubes, test tube rack, 100 mL measuring cylinder, sodium hydrogen carbonate (bicarb soda), hydrochloric acid (2 M), acetic acid (vinegar) (2 M)
Method
1 Place a small amount of cooking oil in the saucepan. 2 Cover the bottom of the pan with popping corn. 3 Heat the saucepan slowly, constantly moving it in the flame. 4 Continue heating, noting any changes that occur.
Method
1 Place a spatula of sodium hydrogen carbonate into a test tube. 2 Place the test tube in a test tube rack. 3 Measure 20 mL of the hydrochloric acid in a measuring cylinder. 4 Carefully but quickly pour the acid into the test tube. 5 Observe any energy released during the reaction. There may be more than one type of energy released, so use your senses of sight and hearing to examine the reaction carefully.
Saucepan
Questions
Bunsen burner
1 Describe the energy transformations that took place in this reaction. 2 Describe any difference in the amount of bubbles formed by each acid. 3 Identify the acid that released energy the fastest. Explain how you could tell. Fig 5.1.5 4 Identify the acid that released the most energy. Explain how you could tell. 5 Identify the acid that had more chemical potential energy stored in it.
Questions
1 List the energy changes that occurred during the heating of the corn. 2 Compare the unpopped corn to the popped corn and suggest what happened to the grains.
117
UNIT
5.1
5. 2
In summer you can feel the Suns heat warming you up. You have to take off layers of clothing to stay cool. In winter you increase the amount of clothing you wear to stop the cold air from cooling you down. We also use heat for many purposes such as cooking and drying clothes. Heat is a very common form of energy that affects us every day.
UNIT
>>>
context
The particles do not actually move along the length of the object; they merely pass along the increased vibrations. Have you ever walked barefoot across a tiled floor and felt that the floor was quite cold, even though it must have been at the same temperature as the rest of the room? Meanwhile the rest of your body didnt feel cold. The reason is that the tiled floor is a better
People in science
Anders Celsius (17011744)
Anders Celsius was born in Uppsala, Sweden, in 1701 into a family of scientists. One of his grandfathers was a mathematician, the other an astronomer, as was his father. Anders himself became a professor of astronomy at the age of 29. He went on several geographical expeditions, including some to polar regions and the equator to compare the length of a degree along a line of longitude in both places. His measurements confirmed Isaac Newtons opinion that the Earth was slightly flattened at the poles compared to a perfect sphere. This expedition helped make Celsius famous, and enabled him to raise funds to build the Uppsala Observatory, where he became director. Celsius is most famous for inventing the Celsius temperature scale, in which, interestingly, he made the boiling point of water zero degrees, and freezing point 100 degrees (the opposite of todays scale). In 1745 Carolus Linnaeus reversed this to the scale we use today. Celsius contributed to astronomy by making many observations, including measuring the brightness of 300 stars. To do this, he tested how many glass plates were needed to stop light from each star getting through. It took 25 glass plates to stop light from the brightest star in the sky, Sirius, from getting through.
Conduction
You may have experienced conduction when washing the dishes or running a bath. Have you ever felt one part of an object (e.g. a plate or metal tray) get hot when another part is held under running hot water, or been burnt by touching a metal tap that has had hot water running from it? These are both examples of conduction. Conduction occurs when the particles in one part of an object vibrate more, and these vibrations are passed on from particle to particle through the object.
118
Conductionvibrations pass along from particle to particle away from the heat source.
Fig 5.2.1
than liquids because the particles in a solid are packed closer together. Among the metals, copper and gold are particularly good conductors. Gases are less efficient conductors than liquids, as the particles in a gas are Cool pools spread out much more. When you jump into a Poor conductors are called swimming pool, the water insulators. The reason many gives you a shock, even if it substances are poor conductors is at the same temperature as the surrounding air. Why? (insulators) is that they contain Water is a much better trapped air, which is a gas and a conductor of heat than air, notoriously bad conductor. so though we may be
comfortable in air at 20C, water at the same temperature conducts heat away from our bodies more rapidly, leaving us feeling colder for a while.
Prac 1 p. 125
Prac 2 p. 126
conductor than the air surrounding the rest of your body, and conducts heat away from your feet, leaving the particles in them vibrating less and feeling cold. Different substances conduct heat at different rates. Metals are generally good conductors of heat, whereas non-metals like paper, wood and plastics are not. Compare the water tap in the laboratory with the desktop or your book. Which feels the coldest? Solids are better conductors
Useful insulation
Many animals make use of the poor conducting ability of air by having thick fur coats or feathers that trap air and insulate them against harsh, cold conditions. Some animals even grow a thicker winter coat. Jumpers, blankets and sleeping bags contain fibres (hair or feathers) that trap air and insulate against the cold.
Fur and feathers provide good insulation by trapping air.
Firewalking
Firewalking is not due to any special magical powers. With the right type of coals (pure charcoal), just a thin outer layer is on fire and only a small amount of heat needs to be conducted out of the burning coals to the foot for the coal to stop burning. Because pure charcoal coals are porous (contain many small holes), it takes about a second for enough heat to conduct from within the coal to the foot before any harm is done. At normal walking pace each foot is in ground contact for only half a second, so there is plenty of time for a firewalker to cross a few metres of hot coals.
Fig 5.2.3
metal rod
Esky
H2O
gas
good conductor
poor conductors
Fig 5.2.2
119
UNIT
5.2
Heat
There are many examples where insulators are useful in the kitchen. Saucepan handles, oven mitts and pot stands are all made of poor conductors to prevent burns to people or surfaces.
>>>
oven mitt
saucepan
insulated handle
pot stand
Fig 5.2.4
The walls and ceilings of many buildings contain fibreglass insulation batts that trap air within fibreglass fibres. Double-glazed windows have two layers of glass (instead of the conventional one sheet) with an insulating layer of air trapped in between. The space shuttles surface is protected by tiles made of insulating material to protect against the heat generated on re-entry to the Earths atmosphere. When these tiles are damaged the effect can be disastrous: on 1 February 2003 the space shuttle Colombia broke up on re-entry, 60 kilometres above Texas, killing all seven of its astronauts.
Fig 5.2.5
Convection
Prac 3 p. 126
R ratings
Insulation batts are often given R ratings. The R stands for resistance to heat flow. The R ratings for 2.5 cm thicknesses of some materials are given below.
Material
Insulation batt Polystyrene foam Chipboard Wood Window (single glazing) Window (double glazing)
R rating
4.0 4.5 2.0 2.3 0.9 1.6
In liquids and gases, more heat is transferred by convection than by conduction. The particles in a solid have fixed positions and can only vibrate, whereas the particles in liquids and gases can actually move about. They can easily carry their heat energy with them, spreading the heat to other parts of the substance. The spread of heat due to the movement of particles in liquids and gases is called convection. When a liquid or gas is heated, the particles in the heated region become more spread out, or less dense. Liquid or gas that is less dense than the rest of the substance will rise, taking heat with it. You may be familiar with the expression hot air riseshot air balloons rise due to the less dense hot air within the balloon. Smoke and air rise above a fire for the same reason.
120
Fig 5.2.6
Hot water systems have heating elements or flames at the bottom of the tank because convection will cause the heated water to naturally rise and mix with the remaining colder water. Central heating vents are usually in the floor, as the hot air will rise to warm higher regions. The roof cavity of a home will often be noticeably warmer than floor level for the same reason. When warmer air rises, cooler, denser air moves in to fill the space left behind, resulting in convection currents. Solar hot water systems also make use of convection as shown in Figure 5.2.8.
Prac 4 p. 127
Fig 5.2.8
cold water
roof
cold water
Fig 5.2.7
Conversely, colder liquid or gas will sink. When an upright freezers door is opened you may feel the cold air as it falls onto your feet. Supermarket freezers that are upright have doors, while the tub type do not, as the cold air cannot escape as easily.
121
UNIT
5.2
Heat
>>>
All objects give out heat radiationthe hotter an object is, the more heat it radiates. Dark objects tend to give out more radiation than shiny or lightcoloured ones at the same temperature. Another good example of radiated heat is an open fire. Red-hot coals give out a great deal of radiation. If someone stands between you and the glowing embers, you notice the loss of radiated heat immediately! An electric radiator gives the same effect.
cooler sea
air cools and drops cool air rushes in to fill space left by warm air warm air rises
Killer heat
In bushfires, it is often radiant heat that is deadlyit can kill well before flames actually reach the victims.
warmer sea
Prac 6 p. 128
Fig 5.2.9
Fig 5.2.10
Radiation
When you step outside into bright sunlight, you often feel the warmth of the Sun on your skin. Heat from the Sun cannot reach us by conduction or convection because space is a vacuum. There are no particles between the Sun and Earth to pass along vibrations or move in convection currents. How then does heat transfer from the Sun to the Earth? The answer is radiation. Radiation is the transfer of heat energy by invisible waves and does not need a material to travel through. Heat radiation is sometimes referred to as infra-red radiation and travels at the speed of light. In fact, infra-red radiation and visible light are both types of electromagnetic waves. You will learn more about these and other waves later on in Science.
Prac 5 p. 127
122
polythene
absorption
reflection
transmission
Fig 5.2.11
A vacuum flask prevents heat loss by all three methods of heat transfer.
Fig 5.2.12
UNIT
5.2
Summary
Heat may be transferred by: conductionthe passing of vibrations from particle to particle convectionthe movement of particles from one place to another radiationwhere no substance is required to aid the transfer.
[ Questions ]
Checkpoint
Energy and heat
1 Identify three sources of heat. 2 Explain the difference between temperature and heat. 3 Identify the three ways that heat can move from one place to another.
Conduction
4 Explain how conduction occurs in terms of particles. 5 For heat to conduct from one solid to another, two things must happen. Explain what these two requirements are. 6 Draw a particle diagram to demonstrate conduction in a metal rod. 7 List the following in order from best to worst heat conductor: water, air, copper, outer space. 8 Identify another name for a poor conductor. Give an example.
9 Explain how a fur coat insulates the person who wears it. 10 Describe what double glazing is and when it is used.
Convection
11 There are many differences between convection and conduction. Explain some of these. 12 Draw a diagram to demonstrate convection currents in a beaker of water being heated from underneath by a Bunsen burner. 13 Draw a diagram to demonstrate how a sea breeze works.
>> 123
UNIT
5.2
Heat
>>>
Radiation
14 Identify a household device that gives out both light and radiated heat. 15 Explain why cloudy nights are usually not as cold as nights when the sky is clear. 27 An open fire in a lounge room is an inefficient way to heat a house, but enclosed wood heaters are better at heating a home. Explain why. 28 Some central heating systems release hot air into a house through vents near the ceiling. Explain why this is a poor design.
Think
16 Explain how some supermarket freezers can be open at the top without losing too much cold air. 17 Explain why you often feel a draft when someone leaves a door open on a cold night. 18 Explain why heat cannot reach the earth from the Sun by conduction or convection. 19 Propose the best colour for the following things (and explain each choice you have made). a solar heating panels b the outside of a house in a hot country c a car radiator, where heat is required to be lost d a fire-fighting uniform 20 Identify the type of heat transfer that applies in each case below. a No material is required. b Particles vibrate. c Particles move through a material. 21 Identify the correct statement and copy it into your workbook. A Black objects are better emitters but poorer absorbers of heat than white objects. B Black objects are better emitters and better absorbers of heat than white objects. C Black objects are worse emitters and better absorbers of heat than white objects. D Black objects are worse emitters and worse absorbers of heat than white objects. E The colour of an object does not affect how it emits or absorbs heat. 22 Identify an example of each type of heat transfer. 23 Explain how a thermos keeps food hot by reducing all three types of heat loss. 24 a Identify four devices or inventions that have something to do with heat energy. b Evaluate the importance of each device to society.
Skills
29 Construct a column graph to display the R values for the table on page 120.
[ Extension ]
Investigate
1 Investigate how radiation is involved in the greenhouse effect. 2 List the ways your house uses or prevents heat transfer. 3 Investigate how dinosaurs such as dimetrodon were able to absorb and emit heat. Are there animals today that use similar methods to absorb and emit heat?
Action
4 Make a heat motor based on the design shown here. The spiral must be made from aluminium, not paper or cardboard.
DYO
thread
stand
Analyse
25 Propose why the outside of a kettle is often shiny. 26 A saucepan full of water is heated on an electric hotplate. Explain the different types of heat transfer happening.
Fig 5.2.13
124
5 Try the experiment illustrated here. The flame should go out due to the heat absorbed by the copper spiral lowering the temperature below that needed for combustion to occur. 6 Make a chimney machine as shown here, and explain its operation.
Flame snuffer
Project
match (lit)
An energy-efficient home
Design a home that requires minimum heating in winter and minimum cooling in summer. Present your final plan in poster format, with the energy-efficient features labelled. Estimate the cost of the features you include, and compare these to the possible savings on fuel and energy bills.
smoke
candle
UNIT
5.2
Prac 1 Unit 5.2
[ Practical activities ]
Conduction in metal rods
Aim To compare the heat conductivity of different metals
Bunsen burner
blob of wax
tripod
Equipment
Three rods made of different metals (e.g. iron, copper, brass), candle, tripod, Bunsen burner, heat-proof mat, timer
Method
1 Assemble the apparatus as shown in Figure 5.2.16. Melt a piece of candle wax at regular intervals along each rod. (Alternatively, use a temperature probe to monitor the temperature at the end of each rod for a given time.) 2 Begin heating the non-waxed ends of each rod, and time how long it takes each blob of candle wax to melt. 3 Stop heating after 5 minutes, if not before.
heat-proof mat
Fig 5.2.16
Questions
1 List the rods in order from best to worst conductor. 2 Present your results as a graph.
125
UNIT
5.2
Heat
>>>
Conduction in water
Prac 2 Unit 5.2
Insulators
Prac 3 Unit 5.2
Equipment
Bunsen burner, heat-proof mat, test tube, small ice blocks, steel wool, safety glasses, test tube holder
Two soft drink cans or small metal containers, insulating materials (e.g. cloth, cotton wool, foam, rubber, newspaper, carpet scraps, fibreglass insulation), thermometer or temperature probe, hot water, beaker, timer
Method
1 Surround one can or container with a layer of one of the insulating materials. Leave the other can uncovered. This can is called a control. 2 Use a beaker to measure a certain amount (e.g. 100 mL) of hot water into both. (Note: you will need hot water of the same temperature later in this experiment.) 3 Place a thermometer or temperature probe in the cans and record the temperature every minute for 10 minutes. 4 Repeat steps 1 to 3 for each of the other insulating materials, making sure the hot water is at the same temperature as that used previously.
Method
1 Heat a test tube containing ice, water and steel wool as shown, moving the tube continuously. Use the steel wool to hold the ice at the bottom of the tube. Make sure you heat at the middle of the test tube, above the steel wool, as shown in Figure 5.2.17. 2 Heat the water until it begins to boil. Fig 5.2.17
thermometer
insulating material
Fig 5.2.18
Extension
5 Try different thicknesses (number of layers) of a particular material. 6 Repeat the experiment, but instead of using hot water, use cold water, and attempt to heat the containers using sunlight or other suitable heating sources.
Questions
1 State whether the ice fully melts before the water boils. 2 Describe what this experiment tells you about the heatconducting ability of water.
Questions
1 Present your results in a table. 2 Draw a line graph for each container on the same set of axes. Put time along the horizontal or x-axis. Label each graph. 3 Identify which material is the: a best insulator b worst insulator 4 Explain why one container was left uncovered.
126
Radiation emission
Aim To find what colour best
Prac 5 Unit 5.2
Equipment
A single crystal of potassium permanganate, a 250 mL beaker, Bunsen burner, tripod, gauze mat, heat-proof mat, glass tube or straw
Two cans (one black and one silver or white), measuring cylinder or beaker, two thermometers or temperature probes, hot water, beaker, timer
Method
1 Assemble the apparatus as shown in Figure 5.2.19, except for the crystal of potassium permanganate. Fig 5.2.19
crystal of potassium permanganate glass tube or straw
Method
1 Fill each can with an equal amount of hot water at the same temperature. 2 Place a thermometer (or a temperature probe) in each container and record the temperature every minute for 20 minutes. 3 Record your results in a table.
water beaker
thermometer
thermometer
Bunsen burner
tripod
heat-proof mat
2 Use a glass tube or straw to gently place the crystal at the bottom of the beaker. (You could try several small pieces of paper instead of potassium permanganate.) 3 Heat the beaker and observe what happens.
Fig 5.2.20
Questions
1 Draw a line graph for each container on the one set of axes. 2 Identify which material is the: a better emitter of heat b worse emitter of heat 3 It was important that the water in each can was at the same temperature at the start. Explain why.
Questions
1 Sketch the pattern formed by the moving potassium permanganate particles at several stages of the experiment. 2 Explain why the particles moved in the path they did. 3 Explain where you would find similar convection currents in the home or industry.
127
UNIT
5.2
Heat
>>>
Radiation absorption
Prac 6 Unit 5.2
AIM To find what colour best absorbs radiated heat energy Equipment
Two thermometers or temperature probes, black card, white card, two retort stands with clamps, a 100 W light globe, heat-proof mat
Method
1 Attach the black card to the bulb of one thermometer, and the white card to the other as shown. (Alternatively, use a temperature probe and study one surface at a time.) Ensure the cards are the same size. 2 Clamp the thermometers and place them on either side of the light globe. 3 Measure and record the distance between the globe and the card. Ensure the globe is placed exactly between the two thermometers. 4 Connect the light globe to a power point and switch on. 5 Record the temperature on each thermometer in a table like the one below. Fig 5.2.21
10
6 Repeat steps 3 to 5 with the cards twice the distance from the globe.
Questions
1 Identify which colour card absorbed radiation the best. 2 In this experiment the light globe must not be closer to one thermometer than the other. Explain why. 3 Explain why the same-sized card should be used on each thermometer. 4 State what happened to the temperature when the cards were twice the distance away. Propose a reason for this observation.
128
5. 3
You see it every day and use it every night. Without it you cannot see. What is it? Its light! Light is the fastest form of energy known. It travels at 300 000 kilometres per second and does not need a material to travel through. (Just as well, as it has to travel through the vacuum of space.) At this speed light only takes about eight and a half minutes to travel 150 million kilometres from the Sun to the Earth.
UNIT
Luminous
Non-luminous
context
Fig 5.3.1
The Sun
Fig 5.3.2
The Moon
Fig 5.3.3
Fig 5.3.4
A tennis ball
Shadows
blue light more than other colours, spreading blue light in the sky.
Shadows are formed when an object blocks the light aimed at a surface. We can predict the position and type of shadow (sharp or fuzzy) using the fact that light travels in a straight line. The term umbra is used to describe a full or sharp shadow. When a larger light source is used, the shadow formed consists of a small umbra and a much larger partial shadow called the penumbra. The effect of the size of the light source on the shadow produced is shown in Figures 5.3.6 and 5.3.7.
Fig 5.3.5
129
Light
Shadow formed using a small light source
object small (point) source of light full shadow (umbra)
>>>
Fig 5.3.6
We measure these angles between the rays and a line called the normal, which is drawn at right angles to the surface.
screen
Regular reflection
Fig 5.2.8
Fig 5.3.9
screen
Diffuse reflection
Fig 5.3.7
Prac 2 p. 135
Fig 5.3.10
Reflection
Reflection occurs when light rays bounce off a surface. There are two main types of reflection: regular and diffuse. Regular reflection occurs at a very smooth surface, such as a mirror or polished metal, and forms a clear image in it. If we cannot see a clear image, then diffuse reflection has occurred for example, light may reflect from a tabletop, but not well enough to form a clear image. Even though it appears smooth, a tabletop surface is quite rough compared to a mirror. Both types of reflection obey the law of reflection. This law states that the angle of the incoming ray is always equal to the angle of the reflected ray.
incident ray angle of incidence angle of reflection
no rm al
mirror
reflected ray
130
Fig 5.3.12
mirror 1m 2m
Fig 5.3.11
1m
Incident ray
Object
Virtual image
Have you noticed how the image of writing appears the wrong way around in a mirror? This effect is known as lateral inversion. Emergency vehicles such as ambulances and fire engines often have their names written back to front so they are easily read in rear-view mirrors.
Two-way mirrors
(the Consider a two-way mirror with a person the subject) on one side, and an observer on ct is in a brightly lit room, and other. If the subje ct the observer is in a darkened room, the subje reflected from the front and back of only sees light back of the glassthat side acts like a mirror. The be coated with a layer of metal thin the mirror may d enough to allow some light to be transmitte observer. The darkened side through to the that side reduces the chance of light passing from cts side, therefore keeping the to the subje observer hidden.
The back-to-front writing will appear the correct way around when seen in a rear-view mirror.
Fig 5.3.13
A periscope makes use of reflection to allow the user to view an image of something at a higher level. Note how the image is at the same level as the users eye.
131
UNIT
5.3
Light
>>>
Fig 5.3.15
object
30
20
image of pointer pointer
40
10
50
mirror
periscope
60
virtual image
Fig 5.3.14
Reading meters
Prac 4 p. 136
UNIT
5.3
A mirror strip in meters, such as those used in electronics, allows a more accurate reading to be taken by lining up the pointer and its image.
[ Questions ]
9 Identify another example (besides a tabletop) of a surface that would most likely produce diffuse reflection. 10 Copy and complete Figure 5.3.16, labelling the angle of incidence, angle of reflection, incident ray, reflected ray and normal.
Checkpoint
Luminous and non-luminous
1 Explain how we can we see a basketball even though it does not produce its own light. 2 Identify five examples of: a luminous objects b non-luminous objects 3 Identify three incandescent objects. 4 Copy and complete: A glow-worm is an example of a _____luminescent creature.
Think
12 Explain the evidence that suggests that light does not need a material to travel through. 13 Calculate how far light could travel in: a 2 seconds b 60 seconds c 1 hour 14 Copy Figure 5.3.7, which shows a large light source, an object and its shadow on a screen. Underneath, draw a similar diagram, but make the object closer to the screen. 15 The Sun is a very large and wide source of light. If instead it was a tiny but bright point source of light, explain how the shadows on Earth would be different.
Shadows
5 Explain how a shadow is formed. 6 Clarify the meaning of the term penumbra. 7 Describe how a shadow changes when an object moves towards a screen. Assume the light source is small.
Reflection
8 Clarify the terms below by writing a definition for each. a reflection b diffuse reflection c law of reflection d normal
132
Fig 5.3.16
16 Write the word EMERGENCY VEHICLE so that it would appear correctly when viewed in a mirror. 17 When a periscope is used, identify where the following are normally located. a the object b the image 18 Other than those examples used in this unit, identify two other situations where plane mirrors are used. 19 a Identify four devices that use light to perform a task. b Evaluate the importance of each device to society.
Analyse
20 Copy Figure 5.3.17 and draw the reflected ray for each incident ray.
mirrored surface
Fig 5.3.18 22 In a clothes shop, a plane mirror is needed that allows people up to 180 cm tall to see themselves in it from head to foot. Calculate what length the mirror should be. 23 Redraw Figure 5.3.12 but place the person further from the mirror. Use rays to demonstrate that they can still see themselves from head to foot.
Create
24 Design a new device that uses a plane mirror(s) to help solve a problem or make a job easier. a Describe the problem you are trying to solve. b Describe how your device will overcome the problem. c Draw a labelled diagram of your device. Include rays to show where the light will be reflected. d Design an advertisement to sell your device to the public.
Fig 5.3.17 21 Copy and complete Figure 5.3.18, showing how the image is formed.
133
UNIT
5.3
Light
>>>
[ Extension ]
Investigate
1 Research what is meant by both a solar and a lunar eclipse. Draw diagrams to explain the differences. 2 Find out how a kaleidoscope works. 3 Research how lasers use reflection to produce stronger beams. 4 Research what an aurora is and make a presentation to the class about this. 5 a Investigate and report on how fibre optic cables transmit light. b List the advantages and disadvantages of fibre optics. c Evaluate the benefits that fibre optics may have for society.
UNIT
5.3
Prac 1 Unit 5.3
[ Practical activities ]
The pinhole camera
Aim To show that light travels in a straight line. Equipment
A small cardboard box (e.g. a shoebox), aluminium foil, tracing paper, masking tape, a candle, scissors
foil tape to join sections
Method
1 Remove a section from each end of the box, and replace it with foil at one end and tracing paper at the other. Seal all gaps with masking tape. 2 Make a small hole in the centre of the foil using a compass point or similar small point. 3 Place a lit candle about 30 cm in front of the pinhole/foil end of the box. 4 Make sure the room is as dark as possible. Observe the image formed at the tracing paper end of the box. 5 Investigate the effect of moving the candle to different distances from the pinhole. 6 Investigate the effect of increasing the size of the pinhole. Fig 5.3.19
Pinhole camera
candle pinhole screen (tracing paper) viewing hole
Fig 5.3.20
Questions
1 Compare the pinhole camera with a real camera. What section represents the film? 2 Copy and complete Figure 5.3.20. Which way up is the image? 3 Explain what happens to the image when: a the candle is moved further away from the camera. b the hole is made larger.
candle pinhole
tracing paper
134
Equipment
A light box and power supply, ruler, mirror, protractor or Mathomat, plain paper
Method
1 Assemble the equipment as shown here, marking the position of the back of the mirror and the normal. 2 Mark the position of the incident and reflected rays. 3 Measure the angle of incidence and angle of reflection and record your results in a table. 4 Repeat steps 1 to 3 for several different angles of incidence.
normal
Questions
1 Explain why the back of the mirror is marked and not the front. 2 Draw a conclusion about the angles for each pair of rays. 3 Describe some examples of reflection in real life. Fig 5.3.21
Image location
Aim To locate an image in a plane mirror
Prac 3 Unit 5.3
Fig 5.3.22
Equipment
A mirror, plain paper, ruler, a pin or small object (e.g. a nail in a small block of wood)
mirror
Method
1 Place the mirror on the paper and mark its position. 2 Place the object in front of the mirror and mark its position with a small cross. 3 Look at the image in the mirror and rule a line of sight on the paper towards the front of the mirror as shown. 4 Place the ruler in a different position and rule another line of sight. 5 Repeat step 3. 6 Remove the mirror from the paper and continue the lines of sight until they cross each other.
line of sight to image pin or other object ruler
Questions
1 Identify where the lines of sight cross each other. 2 Copy the sentence and complete it by choosing one of the words in brackets: The lines of sight represent _________ (reflected/incident) rays.
3 Rule a line from the cross that marked the pins position to where the lines of sight met. State the angle this new line makes with the mirrors surface. 4 State how far in front of the mirror the pin was. 5 State how far behind the mirror the image was.
135
UNIT
5.3
Light
>>>
The periscope
Aim To apply the law of reflection of light by
Prac 4 Unit 5.3
Method
1 Draw the plan in Figure 5.3.23 onto your sheet of cardboard. 2 Score the lines firmly with a pen to aid folding later. 3 Attach mirrors where indicated. 4 Fold the periscope together so that the lines indicated form valley folds, and the mirrors end up on the inside. Use tape to join the edges together. 5 Try your new periscope!
Equipment
Cardboard sheet, sticky tape, two mirrors (each approximately 5 x 7 cm, though smaller will do), scissors
Fig 5.3.23
Questions
attach mirror here
8.5 cm 6 cm 6 cm
1 State the size of the angle at which the light strikes the top of the mirror when the periscope is upright and aimed directly at an object. 2 How could the periscope be made twice as long? Draw a new plan for such a periscope. 3 Propose some uses for periscopes.
6 cm
6 cm
6 cm
6 cm
6 cm 8.5 cm
6 cm
136
5. 4
Sound, like light and heat, is a form of energy. We use sound to communicate, for entertainment such as music, and in medical and industrial applications such as fish finders and ultrasound that inspects unborn babies. As we shall see in this unit, using sound has made many tasks more entertaining and easier. Unlike light, sound needs something to travel in. It cannot travel through a vacuum.
UNIT
context
no sound detected
Fig 5.4.2
ears, our eardrums also begin to vibrate. In the case of a musical drum, a thin membrane vibrates when struck. Our vocal cords produce vibrations when we speak.
air in jar
Fig 5.4.3
sound detected
air particles
Fig 5.4.1
Transmission of sound
We hear sounds because something has caused our eardrums to vibrate. Eardrums are small flaps of tissue inside the ear that pass on messages via special bones and nerve impulses to the brain. But how do vibrations reach our eardrums? Sound is produced when an object vibrates and passes these vibrations into the air. Layers of air vibrate in turn, passing the sound energy through the air in a series of compressions and rarefactions that we call a sound wave. When the wave reaches our
compression speaker producing a rarefaction rarefaction
137
Sound
>>>
The vibration associated with a sound can be demonstrated by placing the prongs of a struck tuning fork into a beaker of water. A similar effect may be observed if several coils of a slinky are compressed. When the compressions are released they travel from one end of the slinky to Prac 1 the other. p. 144 Sound waves and waves such as the one in the slinky in Figure 5.4.5 are called longitudinal waves, as the particles vibrate in the same direction as that of the sound. Sneaky birds Some birds will hop Another type of wave is the around on the ground transverse wave shown in trying to create vibrations Figure 5.4.6, where the in the ground similar to particles vibrate at right angles those produced by rain. Worms under the ground to the direction of the wave. are tricked into coming to Transverse waves may be the surface to escape produced by shaking a slinky being drowned. sideways rather than releasing compressions.
A longitudinal wave in a slinky
Fig 5.4.4
Fig 5.4.5
compressions
rarefactions
coil movements
wave direction
Fig 5.4.6
138
150 m
Fig 5.4.7
If the speed of sound is known, it can be used to calculate distance or depth. If it takes 1 second for a sound vibration to return to a ship after bouncing off a shoal of fish, then the sound has travelled 1400 metres (from the table above, sound travels 1400 metres per second in water), so the distance to the fish is 700 metres. Sonar on ships and fishing vessels uses ultrasonic sound waves. These are waves travelling faster than humans can hear. This technique is called echolocation.
Ultrasonic waves are used in echolocation.
Material
Fig 5.4.8
Echoes
Sound striking a hard wall will reflect back, or echo, towards the source. Echoes can be used to calculate the speed of sound. For example, if the person in Figure 5.4.7 finds that it takes 1 second after making a sound to hear its echo, the sound must have travelled 2 x 150 m or 300 m in 1 second. Hence the speed of sound for the experiment was 300 metres per second.
Some animals use echolocation to avoid obstacles or detect food or objects. Dolphins, piranhas and bats are examples.
139
UNIT
5. 4
Sound
>>>
We call this effect reverberation, and it may take some time to die out as echoes become weaker and weaker. Soft materials such as carpet and curtains absorb the sound energy rather than reflecting it to produce echoes. Concert halls use special sound-absorbing panels to Prac 3 p. 145 reduce reverberation.
Fig 5.4.9
Radar is a similar process to echolocation, except that radio waves are used instead of ultrasound to locate, direct and track various objects over long distances.
Ultrasound
Pregnant women can have an ultrasound to check the development of their unborn baby. This procedure involves using an ultrasound scanner to send sound waves into the womans body, where they are reflected at different surfaces (e.g. bone, soft tissue). The echoes are then converted into images on a monitor. Using this method, the patient avoids potentially harmful X-rays or other surgical procedures.
Fig 5.4.11
Sound graphs
Sound waves may be detected by a microphone and displayed on a cathode ray oscilloscope (CRO for short), a device that converts the pressure variations caused by vibrating layers of air into electrical impulses. The wave displayed on the CRO in Figure 5.4.12 is not a picture of the sound produced by the tuning fork, but more like a graph showing how the
Fig 5.4.10
microphone
Reverberation
If you yell out in an empty hall, the echo time is too short for you to detect a distinct second sound. The echo partly overlaps with the original sound, producing a sound that lasts longer.
tuning fork
Fig 5.4.12
140
pressure is changing as compressions move through the air near the microphone. The number of compressions that pass a point (e.g. the microphone) each second is called the frequency of the sound. A high frequency produces a high-pitched sound. The CRO displays for some other sounds are shown in Figures 5.4.13 and 5.4.14.
reference sound
louder
higher frequency
When played, a clarinet may be thought of as a column of vibrating air particles that also pass vibrations into the surrounding air. A string or air column has a natural frequency that depends on its length. We say the string or column resonates at this frequency. Resonance can be observed when a vibrating object causes another nearby object to vibrate at the same rate. The thin wood of a guitar resonates in response to the vibrating strings. The frequencies of sounds produced by a guitar may be varied by altering the length of the string (by holding the strings at different points) or by tightening or loosening the strings. A clarinet has keys that open or close holes in the column. This changes the length Prac 4 of the air column and the resulting sound. p. 145
Fig 5.4.13
The height of a sound graph indicates loudness. Its horizontal spacing indicates its frequency.
Sound levels
The decibel scale is used to measure sound and noise levels. We use the abbreviation dB for decibels. Figure 5.4.15 shows some decibel levels of a variety of sounds.
Decibel levels for some common sounds
Fig 5.4.15
Decibels (dB) 160 guitar oboe 150 140 jumbo jet on take off
Harmful
piano
noise
CRO displays for a guitar, oboe and piano note, which show a repeating, smooth pattern. Noise shows a much messier pattern.
Loud
Fig 5.4.14
Dangerous
60 50
Quiet
When spoken, different words and letters produce different sound graphs. These can then be used by voice recognition software to convert spoken words into text on a computer.
Normal
141
UNIT
5. 4
Sound
For every increase of 10 decibels, we perceive the loudness to have doubled. Noise-producing machinery may be given decibel ratings; for example, a motor mower may be rated at 75 dB. Sounds levels of 120 dB or more can be painful and result in permanent loss of hearing with continued exposure. Earmuffs and sound-proof walls contain material that absorbs sound energy and so protects against high-decibel sounds.
Worksheet 5.5 The sonic spectrum Worksheet 5.6 Morse code
>>>
Teacher demonstration
Applause
Your teacher may have access to a sound level meter or sound probes. If possible, compare the decibel levels of one person applauding with two or three people applauding, and ultimately the entire class clapping enthusiastically. Determine what your teacher thinks is an acceptable noise level for a class.
UNIT
5. 4
[ Questions ]
12 Explain an advantage of ultrasound. 13 Explain the term reverberation.
Checkpoint
Transmission of sound
1 Describe a test to prove that sound cannot travel through a vacuum. 2 A sound is transmitted from Person X to Person Y by: A air particles which travel from X to Y B air particles passing vibrations from X to Y C infra-red waves in the same way as radiated heat D heated air particles which transmit heat by conduction from X to Y E none of the above 3 List five sources of sound. 4 Sketch a longitudinal wave. 5 Clarify the following terms by providing a definition for each. a compression b rarefaction
Sound graphs
14 True or false? a CRO is short for cathode ray oscilloscope. b A CRO shows what sound waves would actually look like if air were visible. c A CRO can display a graph of pressure at different times as a sound wave passes.
Sound levels
18 Identify the scale used to measure sound levels. 19 Use Figure 5.4.15 to identify the sound levels made by: a a jet aircraft on take-off b a motor mower c normal conversation 20 State the level at which sound becomes dangerous. 21 Identify an example of a machine that may produce dangerous sound levels.
Echoes
10 Identify an example of a useful and a not-so-useful echo. 11 Identify two animals that use echolocation.
142
Think
22 Explain why empty rooms echo more than furnished ones. 23 A student stands at the end of a road and yells towards a house some distance away. If she hears an echo 2 seconds later, how far is she from the house? 24 There is an old expression: Keep your ear to the ground. What do you think it means? Propose where it came from. 25 Explain how pushing someone on a swing is similar to resonance in a guitar. 26 a Identify four technologies that use sound in everyday life. b Explain why each technology is important to society.
29 Copy Figure 5.4.15, which shows various decibel levels, and add the following where you think they best fit. a a noisy class b an idling car engine c a telephone ringing d a rock concert e a person shouting
Create
30 Design a musical instrument that is made from only recycled materials. Your instrument must be able to play the song Twinkle, twinkle little star. Demonstrate your instrument to the class.
Analyse
27 A CRO displays the graph shown in Figure 5.4.16.
[ Extension ]
Investigate
1 Investigate how vocal cords work. 2 Select a photograph of an aeroplane going through the sound barrier and, using this example, explain what a sonic boom is. 3 Using diagrams and a short piece of writing, describe how a piano produces so many different sounds.
Surf
4 Make a model of an instrument called a bull roarer as used by Australian Aboriginals by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 5, and clicking on the destinations button.
Fig 5.4.16 Identify which of the following sounds produced the display above. A a tuning fork C a piano B a guitar D noise 28 Identify which of the displays in Figure 5.4.17 was caused by the loudest sound. Fig 5.4.17
Creative writing
What would be the consequences if the speeds of light and sound were swappedthat is, if light travelled at around 340 metres per second in air, and sound travelled at around 300 000 kilometres per hour? Consider one or more situations, for example: a classroom, sport, transport, communications, traffic, noise pollution possible new inventions that make use of this new state of affairs Would a sonic boom still be possible?
143
UNIT
5. 4
Sound
>>>
[ Practical activities ]
A sound cannon
Aim To make a sound cannon that will blow out
Prac 1 Unit 5.4
UNIT
5. 4
a candle
Equipment
A cardboard tube (e.g. a poster tube), plastic Contact covering or cling wrap, masking tape or rubber bands, a match
Equipment
A teacher with a starting pistol, a long tape measure or trundle wheel for measuring 100300 metres, a stopwatch
Method
1 Place the Contact or cling wrap over each end of the tube, stretch it taut and hold it tight with tape or rubber bands. 2 Make a small hole in one end using a pin or compass end.
Method
1 Measure a straight distance of between 100 and 300 metres with a clear view from the start to the finish. 2 Your teacher should stand at the start with the starting pistol. 3 Several students should stand at the finish with stopwatches. 4 The teacher fires the starting pistol. The students start their watches when they see a wisp of smoke rise from the starting pistol, and stop them when they hear the sound of the pistol. (Alternatively, use a sound detector to determine the time taken for the sound to reach you.) Fig 5.4.19
flame
Fig 5.4.18
Sound cannon
3 Hold a lit match a few centimetres in front of the hole and sharply tap the other end.
measure distance
Questions
1 Explain what happened to the flame when you tapped the end of the tube. 2 Explain why it is important to seal both ends of the tube, and for the Contact or cling wrap to be tight. 3 Why was the small hole necessary? 5 Calculate an average of the times recorded.
Questions
1 The people with stopwatches started timing when light from the smoke reached their eyes. Explain whether the time this takes is a significant factor. 2 Explain the advantage of calculating an average. 3 Use your average to calculate the speed of sound. To do this, divide the distance (in metres) by the time (in seconds).
144
Chapter review
[ Summary questions ]
1 Explain the difference between energy and work.
DYO
Equipment
2 List all the types of energy you can, and identify an example of each. 3 Use examples to explain the following terms: a conservation of energy b energy transformation 4 Choose two appliances used in the home and explain the energy transformations that happen when they are used. 5 Identify the three ways in which heat may be transferred. 6 Copy and complete: Heat flows from one region to any other at a __________ __________. 7 Classify the following as either heat insulators or heat conductors: nail, foam esky, wooden table, plastic cup, barbecue grill, frypan handle, woollen jumper, metal oven tray. 8 a Identify whether water or air is the better conductor of heat. b Explain why. 9 Copy and complete: A sea breeze is an example of ____.
A sound level meter or sound probe/data logging system, various materials to test as reflectors and absorbers of sound
Method
Design an experiment to test and compare the reflecting and absorbing qualities of various materials (e.g. cardboard, glass, wood, plasterboard, curtains).
Equipment
250 mL measuring cylinder, tuning fork
Method
1 Strike a tuning fork and hold it at the top of the measuring cylinder. (If a sound detector is available, you may wish to use one to measure the intensity of the sound produced.) 2 Add a small amount of water to change the length of the air column in the measuring cylinder, and repeat step 1. Note whether the sound produced is louder or not.
Fig 5.4.20
10 Identify an example of radiated heat. 11 State which colour objects best absorb and emit heat. 12 a Explain the difference between a luminous object and an incandescent one. b Identify an example of each. 13 Explain why not all shadows are sharp. 14 Write a definition to clarify the term umbra. 15 State the kind of waves that sound waves are. 16 Identify which diagram below best represents an actual sound wave.
>>
3 Keep adding water and testing the sound produced when a struck tuning fork is held at the top of the cylinder.
Questions
1 Determine the length of air column that has a resonant frequency equal to that of the tuning fork. 2 Explain why water is added in small amounts.
C
145
>>>
17 True or false? a Sound needs a material to travel through. b Light needs a material to travel through. 18 a Many applications and uses of science in everyday life were introduced in this chapter. Copy and complete the table below to summarise some of these applications. b Identify two more technologies not listed in the table and add them to your summary.
[ Interpreting questions ]
24 Identify the type of heat transfer that does not require a material. 25 Explain the difference between an echo and a reverberation. 26 A person standing 160 m from a wall hears an echo from it 1 second after calling out. State the speed of sound based on this information.
How it works
Sound waves are sent into the body and reflected back from bones, tissue etc. The reflected sound is changed into an image on a screen.
Technology
Ultrasound
Use of technology
Viewing unborn babies
Type of energy
(heat, light, sound)
Sound
Thermos Periscope Fish finder (echolocation) Two-way mirror Guitar Solar hot water system Insulation batt
27 A boat is using echolocation to find fish. The signal is sent down into the water and returns to the boat after 1 second. The speed of sound in water is 1400 m/s. a Calculate how deep the fish are. b If the sound returned in 0.5 seconds, how deep would the fish be?
[ Thinking questions ]
19 Identify the energy transformation taking place in each of the following situations. a A car accelerates. b A person running trips and falls over. c A brick is lifted up onto a wall. d A clothes dryer is switched on. 20 Draw a diagram to demonstrate a ray of light making an angle of incidence of 30C with a plane mirror. Also show the reflected ray. 21 a Explain what lateral inversion is. b Demonstrate your understanding of this by writing your name in capital letters, laterally inverted. 22 Identify the type of image that is produced when an object is close to a plane mirror. 23 Draw a diagram to demonstrate how a periscope works.
28 A vibrating tuning fork placed on a tabletop causes the tabletop to vibrate at the same frequency. What do we call this? 29 Three sounds are displayed on a cathode ray oscilloscope as shown here. a Identify which sound is the highest in pitch. b Identify which sound is the loudest. c State the unit used to measure sound levels.
Worksheet 5.7 Heat, light and sound crossword Worksheet 5.8 Sci-words
146
>>>
Classification
Key focus area:
By the end of this chapter you should be able to: identify whether something is living or not, using the characteristics of life explain how scientists developed models for the classification of living things classify plants and animals using simple keys use keys to identify a variety of plants and animals.
4.2, 4.8.2
Outcomes
1 How do we know if
something is alive?
Pre quiz
6.1
context
If you were given a rabbit, a Discman, a pencil case and a goldfish, you would have no difficulty sorting them into a group of living things and a group of non-living things. It would be a little more difficult if you were given some pond slime. Although definitely living, it seems to be less lively than the water in a fast-flowing river. So how do we know what is living and what is nonliving? What is it about living things that lets us know they are alive? In order to decide whether something is living we must use a set of characteristics.
UNIT
>>>
Scientists use these characteristics to make it easier to work out if something is living and so that we all agree about what living means. Anything that has life is called an organism, including you.
Fig 6.1.2
Fig 6.1.1
Animals obviously meet all the characteristics of living things. Plants are living things too, although their movement and growth can be so slow that we often dont notice it. Some things that are not alive may possess some of the characteristics of living things but not all of them. For example, the water in a river can move but it is not a living thing. Among other things, it does not use air or reproduce.
148
Plants also make energy by respiration but they are able to make their own glucose to carry out this reaction. Organisms that can make their own food are called autotrophs. The chemical reaction that plants carry out to produce food is called photosynthesis. The equation for photosynthesis is the reverse of cellular respiration. In photosynthesis, carbon dioxide and water are used to produce glucose and oxygen:
This plant does not gain energy from the insects it trapswhat does it get?
Fig 6.1.4
Carnivorous plants
Carnivorous plants do exist, but they dont get any energy from the animals they trap. Most of these plants live in soils that are short of nitrogen, so these plants get their nitrogen from the animals they trap. They then use the nitrogen to help build materials they need to live. One of the largest carnivorous plants in the world, a type of sundew known as Drosera gigantea, which grows to about 1 metre tall, is found in south-west Western Australia.
Plants capture energy from the Sun to make this reaction happen.
Plants absorb energy from the Sun and use it to make food.
Prac 1 p. 153
About two-thirds of the food that humans take in is used to keep us warm. If our bodies are not kept at 37C, we will quickly become unwell. This is because we are endothermic (more commonly known as warm-blooded). Some animals, like crocodiles, dont use the energy from their food to keep themselves warm; instead they use the warmth of the Sun. This means that, in spite of their large size, crocodiles dont eat very much food. Animals like this Prac 2 are said to be p. 154 ectothermic.
Cold blooded?
Ectotherms are often mistakenly called cold blooded. This term is incorrect as these animals do not have cold blood. They just gain their body heat in a different way to endotherms. The temperature of their blood will vary through the day and can be as warm as any endotherm. After all, the Sun can get very hot!
Fig 6.1.3
149
UNIT
6 .1
Being alive
Living things produce wastes
There are many chemical reactions constantly going on inside organisms. Along with the useful products, these reactions also produce wastes that can become poisonous if they are not removed. Humans get rid of the products of cellular respiration, carbon dioxide Helpful fungi and water, by breathing out. Wastes from living things We also get rid of excess water are sometimes used by by urinating and sweating. other living things. A type Plants use their leaves to of fungus called yeast uses sugar as its energy source get rid of the waste oxygen and produces alcohol as produced by photosynthesis, waste. The alcohol is then and excess carbon dioxide excreted into the liquid that the yeast lives in, making from respiration. wine, beer, whisky, vodka The removal of waste etc. in the process! products from an organism is called excretion.
Sweating is one way in which humans excrete wastes.
>>>
Fig 6.1.5
Fig 6.1.6
Fig 6.1.7
150
In 1674, when Antoni van Leeuwenhoek first used a very simple microscope to look at pond water, he saw tiny shapes that were moving about. Because they were moving he decided they were alive. He had used one of the characteristics of life to decide that his new discovery was a living thing.
Fig 6.1.10
Cells
Fig 6.1.8
Living things can reproducemating red-eyed tree frogs
Male or female?
Not all organisms are of one gender, and not all stay the same gender throughout their lives. Animals like slugs and snails are both male and female at the same time, or hermaphrodites. The barramundi, a type of fish found in northern Australia, changes from male to female as it grows. All barramundi under five years old are males, while older ones are all females.
Barramundi change gender during their lives.
Fig 6.1.9
There is another characteristic that all living things share that you cannot see with the human eye, no matter how carefully you look. All living things are made up from at least one cell or from things that are made from cells, such as hair or fingernails. This is why we call cells the building blocks of life. As you saw in Chapter 4, nobody knew that living things were made of cells until the microscope was invented. A living thing grows because it has created more cells. A fully grown blue whale contains about one hundred thousand trillion cells!
151
UNIT
6 .1
Being alive
>>>
[ Questions ]
17 Some robotic toys seem to behave as if they are alive. For example, they indicate when they need feeding. a List the characteristics of life that they show, and those they do not show. b Evaluate whether these toys could be alive. 18 During the Apollo 13 mission, the astronauts had a problem with the device that removed carbon dioxide from the air they were breathing. a Explain where this carbon dioxide came from. b Explain why we dont have similar problems on Earth. 19 Imagine that you are in radio contact with an astronaut on the Moon. She has just stood in a strange, squelchy mess and thinks it may be alive. Design a procedure she could follow to find out if it is alive or not. 20 This is a story about a normal person. He does the same sorts of things that we all do but there is one big difference. Aliens from another planet are watching him! They are trying to decide whether he is alive. This is what they see him doing one morning. Jack wakes up when his loud alarm clock rings at 6.45 a.m. He reaches across to the bedside table and turns it off. He also turns on the bedside lamp. The bright light from the lamp makes him blink. After a short while, Jack gets out of bed and walks to the bathroom. He goes to the toilet, takes a shower and walks down the stairs. He can smell toast cooking in the kitchen and he breathes in deeply to take in the wonderful smell. After eating his breakfast, he leaves the house and walks to the ferry. The cold Sydney air makes him cough as he gets on the ferry to go to work. Construct a table to summarise the things that Jack did during the morning that the aliens could use to prove he is alive.
UNIT
6 .1
Checkpoint
The characteristics of life
1 Explain what a characteristic is. 2 State two characteristics of humans. 3 List the seven characteristics of living things.
Think
4 Copy and complete the following equation for cellular respiration:
glucose + ______ carbon dioxide + ______ + ______
5 People breathe through their lungs. Explain how other animals and plants breathe. 6 Identify the term used for the removal of wastes from an organism. 7 A person runs up to a seagull and it flies away. In this case, identify: a the stimulus b the response 8 Compare endothermic animals and ectothermic animals by making a list of their differences. 9 Explain the difference between sexual and asexual reproduction. 10 Explain why people didnt know about cells until the microscope was invented. 11 Plants dont normally move very much. Describe an example of plants moving of their own accord. 12 Clarify whether organisms have to show all the characteristics of living things to be said to be alive. 13 Identify one non-living thing that displays a characteristic of a living thing. 14 Look around the classroom. Identify one living and one non-living thing that you can see. 15 Plants are living things yet it is difficult to see some of the characteristics of life in them. Explain why.
Analyse
16 Classify the following things as living or non-living, and give a reason for your answer in each case. a a rabbit e a car b a pen f a tree c an apple g a donkey d a human h a rubbish bin
152
[ Extension ]
Investigate
1 When people go to foreign countries, they often take travel guides with them. These point out the interesting places to see. These books normally contain a section on the wildlife of the area. Write a section for a travel guide to be used by an alien from another planet that would help them to decide what is and what is not alive on Earth. 2 NASA scientists have recently found what they think may be evidence that there used to be life on Mars. Research what this evidence is and how it relates to the characteristics of life.
3 When we send space probes to other planets, we often look for evidence of water rather than little green men. Research and explain why.
Create
4 Create a new organism that shows all the characteristics of life. a Decide in which environment your organism will live. b Either construct a model of your organism using play dough, or present your organism as an artwork or poster. c Make a key to explain how your organism meets the requirements of life. For example, how does it make its energy, move about etc? d Evaluate a classmates organism and decide if it is truly alive.
UNIT
6.1
Prac 1 Unit 6.1
[ Practical activities ]
Light and photosynthesis
Aim To investigate how the amount of light
affects how much food a plant makes
Method
1 Take one leaf that has been left in the dark and one that has not. Make sure they are different sizes so they are easy to tell apart. Record their appearance. 2 Set up a hot water bath. 3 Add the leaves to the small beaker and just cover them in ethanol. 4 Carefully place the small beaker in the hot water bath as shown in Figure 6.1.11. You may need to hold it with a test tube holder.
Equipment
A plant that has been left in the dark for several days and a plant that hasnt OR a plant with several leaves that have been covered with aluminium foil for several days, ethanol, 1 large and 1 small beaker, iodine solution, heat mat, Bunsen burner, tripod, gauze, tweezers, watch-glass
Step 1
Cover plant leaves in foil or leave in dark for several days
Step 2
Boil leaves in alcohol over hot water bath
Step 3
Cover leaves in iodine solution
uncovered
leaves
iodine solution
watch-glass
covered
leaves
Fig 6.1.11
>> 153
UNIT
6 .1
Being alive
>>>
Mustard seeds
Prac 2 Unit 6.1
CAUTION: Ethanol is extremely flammable. Dont get it near the Bunsen burner flame. 5 Boil the leaves in the ethanol until most of the green colour has come out. 6 Remove them from the beaker with the tweezers and place them on the watch-glass. 7 Cover them with iodine solution and record their appearance.
Aim To observe the changes that occur during growth and development of a living thing Equipment
3 small glass or plastic containers, cotton wool, aluminium foil, sticky tape, 30 mustard seeds, plastic wrap, pin
Method
1 Put about 1 cm of cotton wool in the bottom of each container. Moisten it with a bit of water. 2 Add 10 mustard seeds to each one. 3 Place plastic wrap over the top to stop the seeds drying out. 4 Use the pin to make a small airhole in each piece of plastic wrap.
Questions
1 Iodine turns purple when it is mixed with starch. The greater the amount of starch in the leaf, the more photosynthesis has occurred. Identify which leaf had the most photosynthesis occurring. 2 Draw a conclusion from this practical.
Fig 6.1.12
5 Completely cover one of the containers with the aluminium foil so that no light can get in. 6 Cover another container in a similar way but this time leave a 1 square centimetre window in the foil near the top of the container. 7 Leave the containers in a safe place for several days. 8 Remove the paper and note any difference in the seeds.
Questions
1 Sketch your results, labelling each container. 2 Explain what this experiment has shown.
154
6.2
context
There are an estimated 13 to 14 million different types of organisms in the world. So how can we logically organise them? When we are given a large, complicated group of things to organise, the first thing we often do is to sort them into smaller, simpler groups. Say you were given a handful of mixed lollies and told to put them into two groups. How would you do it? What characteristics would you use? Scientists use the same practice of putting things into groups of related types. This is called classification.
UNIT
Classification
Examples of classification can be seen all around us and they make life a lot easier. At the supermarket, items are organised by type or by the way they are packaged. Canned fish will be in one aisle, pasta in another, and sauces and bread somewhere else. Fresh vegetables are in one place, canned ones in another and frozen ones in the freezer. Classification in the supermarket helps us to find what we want. Lets say you need some maple syrup topping for your ice-cream. Where do you go?
Even though you may have never used it or seen it before, you know it is probably in the dessert and syrup area. If you then cant find the maple syrup, you will be able to find something very similar to it because all the similar things are kept together. Your school library organises its books by subject or author. Books on the same subject are in roughly the same place, and novels by the same author are grouped together.
Fig 6.2.1
The books in your school library have been classifiedwhy is this a good idea?
155
>>>
all life most organisms with least similarities
kingdom
phylum
class
order
family
Fig 6.2.2
genus
species
Fig 6.2.3
If all these terms are hard to remember, you might want to think of a mnemonica silly sentence to help remind you. For example, you can remember: KingdomPhylumClassOrderFamily GenusSpecies by remembering: Kind People Can Often Find Green Shoes Can you think of a better one? A kingdom is divided into smaller groups called phyla (singular: phylum). In the plant kingdom, phyla are often called major groups or divisions. These phyla and major groups are then divided into classes. Classes are divided into orders. Orders can be divided into families. Families can be divided into genera (singular: genus). Genera are divided into species.
fungi plants e.g. rosebush animals e.g. kangaroo e.g. mushroom monera e.g. bacteria protists e.g. seaweed
Fig 6.2.4
156
What is a species?
As you move down through this classification, the number of living things in New cat each group gets smaller, but It is not only new living the things in the group species that are being become more similarthat is, discovered. Through fossils, previously unknown they share more features. As extinct animals are also stated above, when you reach discovered from time to the final group it is called a time. One recent discovery was a million-year-old, species. All members of one sabre-toothed cat skull. species are very similar, but Previously only two kinds not identical. You only have of these cats were known now there are three! to look at your classmates to realise that all members of the same species are not identical. The easiest way to understand this is to think of a species as a group of things that can reproduce and create young that can also reproduce. Being able to reproduce is called being fertile: a species is a group of similar organisms that can produce fertile young. For example, a Japanese woman and a Scottish man can have a baby together because they are part of the same speciesthey are both human. On the other hand, a tiger and a frog can clearly not mate and produce young, so we say they are different species. Sometimes two different species that look similar can interbreed. For example, a horse and a donkey can interbreed to produce a mule. But a mule cannot reproduce, since it is sterile.
Naming species
The practice in science is to be very precise, therefore each species of living thing on Earth has its own unique scientific name. The naming system used by scientists throughout the world was established by Linnaeus in 1753. The system requires that each species be given a name with two partsits binomial name. The first part of the scientific name is the genus, and is always spelt with a capital. The second part of the scientific name is the specific grouping or species, and is always spelt with a lower case letter. Since no living thing can be placed into two different genera, no two living things can have the same scientific name. The scientific names of two types of trees found in New South Wales are Eucalyptus camaldulensis (the river red gum) and Eucalyptus ovata (the swamp gum). They both start with Eucalyptus because they belong to the same genus. The second part represents the species within the genus (i.e. what type of gum tree they are). As another example of classification, lets look at dogs. The dog has the following classification: Kingdom: Animal Phylum: Chordata Class: Mammalia Family: Canidae Genus and species: Canis familiaris.
Can you pick Canis familiaris from Felis catus?
Fig 6.2.6
Fig 6.2.5
157
UNIT
6. 2
>>>
Dichotomous key classifying five family pets
Fig 6.2.7
pets
Introducing keys
To make classifications easier to understand, scientists use a model called a key. Keys are simple, easy-tofollow representations of classification systems. The most common type is the dichotomous key. Dichotomous keys have two choices at every point. They start at the top with one group and slowly subdivide until no more choices are possible. These are most often written as flow charts, like the one shown in Figure 6.2.7. This dichotomous key starts with a group of five domestic pets and classifies each animal. The same key for the five domestic pets could also be written in tabular form as Prac 1 p. 160 shown in Figure 6.2.8.
lives in water
goldfish
mouse
UNIT
6 .2
[ Questions ]
doesnt bark
barks
Checkpoint
Classification
1 Clarify what classification is. 2 You are given five pieces of fruit: an apple, a pear, a banana, an orange and a grape. List the characteristics you could use to divide them into two groups. 3 Apart from the library and supermarket, identify one everyday place where there is a classification system at work. 4 Explain why classification systems are useful.
1 2 3 4 Lives in water Doesnt live in water Has big ears Doesnt have big ears Breeds quickly Doesnt breed quickly Barks Doesnt bark fish go to 2 rabbit go to 3 mouse go to 4 dog cat
cat dog
Fig 6.2.8
8 Explain what a species is. 9 Explain how we know that a horse and a donkey are different species. 10 Describe how the unique scientific name for every living thing is created.
7 Plants are not divided into phylastate what they are divided into.
158
Introducing keys
11 Explain what a key is. 12 Explain what the word dichotomous means when used to describe a key.
Fig 6.2.9
Think
13 Identify the class that a dog is in. 14 If you invented a system for classifying the tools used in a car repair shop, would you base your system on what the tools were made of or what they were used for? Explain your answer. 15 Think about the cars in a car park. They all have the same function but there are lots of differences between them. State the characteristics you could use to classify them. 16 A subphylum represents a group smaller than a phylum but bigger than a class. Explain what you think a subclass represents. 17 For a long time in history, people tried to name every single new organism they came across and remember them. Explain why this system was doomed to failure. 18 There used to be only two kingdoms of organismsplants and animals. Now there are four or five, or even six (depending on who you talk to). a Explain why the number of known kingdoms has changed in the past. b Explain why the number of kingdoms may change again in the future. c Explain what this says about the way science works. 22 Using the key in Figure 6.2.10, classify these people.
people
no freckles
freckles
female
male Eugene
no hair Ken
hair Herman
no pigtails Louisa
pigtails Jane
Skills
19 a Design a dichotomous key to classify the contents of your pencil case. Make sure you have at least six different items. b Now present the same key in tabular form. 20 a Write a paragraph to describe the contents of your pencil case. b Explain which is easier to understand: one of the keys you created in question 19 or the paragraph you just wrote. 21 Look at the aliens in Figure 6.2.9. Design a dichotomous key to classify them.
Fig 6.2.10
159
UNIT
6. 2
>>>
Create
3 You have discovered a new species! You must now report your findings to the Royal Society of Science. a Draw a diagram of your new species. Be creative about its characteristics. b Classify your organism into a kingdom. c Outline the characteristics of your new species, especially those that make fit the kingdom you have chosen. d Give your species a name using the binomal naming system.
[ Extension ]
Investigate
1 Investigate what led Linnaeus to come up with his system of classification. Produce an information card that explains your findings and other interesting information about Linnaeus.
Action
2 Design a key to identify the different members of your family or friends. Remember to use physical characteristics.
UNIT
6.2
Prac 1 Unit 6.2
[ Practical activity ]
Making a pasta key
AIM To construct a key to classify pasta Equipment
At least 5 different kinds of pasta in large container at front, beaker
Method
1 Using your beaker, scoop out some pasta. 2 Take this to your bench and discuss with your partner/group what characteristics you can use to classify this pasta. 3 Create a dichotomous key to classify your pasta. 4 When you get to the point where you are at a particular type, draw the pasta in that place on your key. 5 Now create a NEW dichotomous key and reclassify your pasta.
pasta
Questions
1 Look at your classmates keys. State whether they used the same characteristics that you did. 2 Evaluate your keys. Which do you think was better? Could it be improved?
Fig 6.2.11
160
6.3
Biologists have used the structural features of animals as the basis for classification. Structural features are how they are physically made up, so if animals have been grouped together it means that they have obvious structures in common. Notice in Figure 6.3.1 that the main structural feature used for classification of animals is whether they have a backbone or not.
UNIT
context
Vertebrates
Vertebrates are animals that develop a backbone as they grow. They are all members of the phylum Chordata and are called chordates. Vertebrates are divided into five major classesamphibians, reptiles, birds, mammals and fish.
Tiny animals
Large animals are a rare life form, since 99% of all known animals are smaller than a bee!
Fig 6.3.1
animal kingdom
sponges
arthropods
amphibians no skin covering, live in damp places, lay eggs in water e.g. frog
millipedes
centipedes
reptiles arachnids skin covered in scales, live mainly on land, lay eggs on land e.g. crocodile e.g. spider
161
Animal classification
Amphibious eyes
>>>
Without goggles, we are not able to focus below the water, so how do amphibians manage to see things both above and below water? The answer is that most of them have flattened corneas (see Figure 6.3.3). This flat cornea doesnt really do much in air or water, so vision is much the same. Humans have rounded corneas, which give us good vision in air, better than amphibians, but terrible in water. Amphibians can focus in air and water but their side vision isnt very good.
Amphibians
Amphibians have two stages to their life: many live their early life completely under water and the rest of their lives breathing above water. The best known example of this two-stage life is the frog, which starts life as a tadpole with gills and slowly changes into an adult frog with lungs. These animals have a thin skin that would dry out if they did not live in a damp area. Amphibians
Fig 6.3.2
have to go back to water to reproduce because their eggs do not have a waterproof coat. Amphibians get heat from their surroundings, making them ectotherms. All belong to the class Amphibia, meaning doublelife (amphis = double, bios = life, in Greek).
cornea
cornea
human
amphibian
Fig 6.3.3
Amphibians have flatter corneas than humans dothis enables them to focus both in and out of water.
Reptiles
Reptiles form the class Reptilia (repere = to creep, in Latin). They have dry scales and lungs, and lay soft, leathery, waterproof eggs. Animals similar to modern-day reptiles were the first animals that could live entirely on land. Reptiles include the snakes, lizards, turtles, tuatara, crocodiles and alligators. Many extinct animals (such as dinosaurs) Fossils were reptile too. Todays Fossils have been found reptiles are also ectotherms. By in Australia of a species lying in the sun, their body of goanna that was over temperature can become as 6 metres long. The largest living goanna, high as our own, but unlike us the Komodo dragon, and they cannot retain this heat. lives on Komodo Island This is why they are not very in Indonesia, and is less than half this size. active in cold weather. Some of Australias most dangerous animals are reptiles. The saltwater crocodile is feared with good reason. Some of our snakes, like the death adder, taipan and tiger snake, can kill very quickly.
162
Fig 6.3.4
crown eyering nape mantle back lores forehead upper mandible
rump
belly
tail
Fig 6.3.6
Fish Birds
Birds all have feathers, even the ones that cant fly. They have some scales, but only on their legs and feet. They breathe with lungs and the eggs they lay are hard-shelled. Birds are endotherms. This means they make their own heat by using most of the energy from their food to keep warm. About 900 different species of bird have been seen in Australia. Birds form the class Aves (avis = bird in Latin). There are many thousands of species of fish. They can be divided into bony fishes (class Osteichthyes), jawless fishes (class Agnatha), and cartilaginous fishes (class Chondrichthyes). The names for these classes all have a Greek origin: osteichthyes = osteon (bone) + ichthyes (fish) agnatha = a (without) + gnathos (jaw) chondrichthyes = chondros (cartilage) + ichthyes (fish). The bony fishes have a skeleton of bone. Most fish fall into this class. Cartilaginous fishes have a skeleton of firm, rubber-like cartilage (the same material that makes up the squashy part of the tip of your nose) and paired fins. Sharks and stingrays are cartilaginous fish. The jawless fishes also have a skeleton of cartilage, but they do not have any paired fins.
The great white shark is a cartilaginous fish.
Fig 6.3.7
Fig 6.3.5
163
UNIT
6. 3
Animal classification
There are only about forty-five species of this type of fish. One example is the lamprey. All fish have gills and scales, and most lay eggs. There have been fish in the Earths water systems for at least 440 million years.
Prac 1 p. 169
>>>
The marsupials give birth to tiny young, which then continue to grow in a pouch. Examples are wombats, possums and kangaroos. The monotremes are mammals that lay eggs. The eggs hatch after a few days and then the young develop in a pouch. There are only three living species of monotreme: the short-beaked echidna and the platypus, which are found in Australia, and the long-beaked echidna, which is found only in Papua New Guinea. When the first platypus was sent to Europe to be studied, scientists thought it was a hoax because it was so different from the animals they knew.
The kangaroo is a marsupial mammal with a pouch.
Fig 6.3.8
Fig 6.3.10
Mammals
All mammals (class Mammalia) are ectotherms, feed their young on milk and have hair. Not all hair is the same: wool and fur are types of hair. On some mammals such as whales, the hair is not obvious, but it is always present, even if only on newborns. The milk is formed in the mammary glands (mamma = breast, in Latin). These two featureshair and mammary glandsare the main features by which we can identify a mammal. The mammals are split into three groups. The placental mammals give birth to welldeveloped young. Examples are cows, bats, humans and whales.
Fig 6.3.11
Fig 6.3.9
164
Invertebrates
Animals without backbones are known as invertebrates. As can be seen from the pie graph in Figure 6.3.12, most of the animals in the world are invertebrates. There are many phyla within this group. The main ones are the cnidarians, arthropods, molluscs and worms.
The relative abundance of different types of animal
Fig 6.3.12
Examples of cnidarians are jellyfish, corals and anemones. Many jellyfish are harmless but some, like the box jellyfish, can kill. Many people have felt the nasty sting of a bluebottle, which leaves raised red welts on the skin. One treatment for this is to put vinegar on the welt to destroy the stinging cells left behind by the bluebottle.
A cnidarian the orange cup coral polyp
Jellyfish
There are some amazing types of jellyfish around. A siphonophore is a chain of individuals linked together. At the ends of their tentacles they make fishing-lure type shapes with their own flesh. They jig them up and down. The fish that go for the lure end up with a nasty, often fatal, sting.
invertebrates
Fig 6.3.13
mammals
vertebrates
Cnidarians
The cnidarians used to be called coelenterates. They form the phylum Cnidaria (pronounced nid-air-ee-a). About 10 000 species of cnidarians have been identified so far. All Cnidarians have stinging cells and a bag-like body with only one opening surrounded by tentacles. Food goes in this opening and wastes go out. Cnidarians with bodies that attach to something, like a rock, are called polyps. Free-swimming cnidarians are called medusas. Cnidarians mostly live in the sea but some are found in fresh water.
Fig 6.3.14
165
UNIT
6. 3
Animal classification
Arthropods
The arthropods form the largest animal phylum, the phylum Arthropoda. About 75 per cent of all known animals are part of this phylum. Arthropods are found everywhereon land, in the air, and in all water systems. They have segmented bodies, paired jointed legs and an exoskeleton. An exoskeleton is a hard outer coveringan external skeleton. Within the arthropods, the major classes are the: insects (class Insecta) centipedes (class Chilopoda) millipedes (class Diplopoda) arachnids (class Arachnida) Prac 2 p. 170 crustaceans (class Crustacea). There are close to a million different species of known insects although no doubt there are a lot more yet to be identified. There are more species of insects than any other living thing. Insects have one pair of antennae and their bodies are divided into three sectionsthe head, thorax and abdomen. They always have three pairs of legs on their thorax.
Fig 6.3.15
The parts of an insect
>>>
Centipedes live on land and have one long pair of antennae. Their whole body is segmented and they have one pair of legs on each segment. They have jaws on the first segment and a flattened body. Millipedes also live on land and have one short pair of antennae. Their bodies are also segmented, but tend to be more rounded than centipedes bodies. Millipedes have two pairs of legs on most segments.
Fig 6.3.17
pronotum forewing antenna head thorax abdomen ovipositor
hind leg
Many arachnids live on land but some can live in the water. They have no antennae and only a few body segments. They have four pairs of legs and no jaws. Everyone is familiar with spiders, but these are not the only arachnids. Scorpions, mites and ticks also belong to this class.
An arachnida rose-haired tarantula
Fig 6.3.18
How old?
The cockroach is an insect that has been almost unchanged for more than 320 million years. It is thought that the cockroach can survive nuclear radiation.
Fig 6.3.16
166
Crustaceans mostly live in the water. They have two pairs of antennae and breathe through gills. Examples of crustaceans are crabs, prawns and lobsters.
A crab is a crustacean.
Fig 6.3.19
cylindrical bodies and a digestive tube with a mouth and anus. Examples of roundworms are hookworms and intestinal roundworms. Flatworms (phylum Platyhelminths, from the Greek: platys = flat, helmins = worm) are similar to roundworms in that they can also be parasitic or freeliving but have flat bodies instead of round ones. If they have a digestive system, it has only one opening. Flukes and tapeworms are examples of flatworms. Annelids (phylum Annelida, in Latin annulus = ring) are also known as segmented worms. They are found both on land and in the water. They have well-developed body systems and segmented bodies. Examples Prac 3 p. 170 are leeches and earthworms.
A segmented wormthe different body segments are clearly visible.
Fig 6.3.21
Molluscs
Most molluscs live in the water but a few types live only on land. They have soft bodies, sometimes covered with a shell. They have well-developed internal organs and a large, muscular foot for movement. The molluscs are the second-largest phylum of animals and include snails, octopuses, slugs and squids.
Fig 6.3.20
Worms
There are three different phyla of worms. The roundworms (phylum Nematoda, from nema = thread, in Greek) are sometimes parasitic. This means that they live off other living animals. Others are free-living in either water or damp soil. They have long, unsegmented,
167
UNIT
6. 3
Animal classification
penguins were placed in the same category as kangaroos. The reason is that they are both grounddwelling meat sources. Birds were placed in the flying food source category. There are also instances of a particular species having no Aboriginal name because it is not used. In a northern area of Australia some Aboriginal tribes named plants according to their uses or their location such as swamp, beach or forest. Fish (guya) are also known according to where they live in the water. This gives five subclasses. Garrwarpuy dwell near the surface Ngoypuy live near the bottom Mayangbuy live in rivers
Worksheet 6.3 Sorting animals
>>>
Raypinybuy live in fresh water Gundapuy live among rocks and reefs In contrast, shellfish and crustaceans (maypal) have at least 10 subclasses. These are determined according to how they attach to rocks or move about and whether they are associated with rocks or reefs. The four distinct subgroups are: Gundapuy attached to reefs and rocks Warranggulpuy move over the outer surface of rocks Lirrapuy move around the edges of rocks Djinawapuy attached beneath rocks or inside coral
UNIT
6 .3
[ Questions ]
9 Classify the following animals as vertebrates or invertebrates. a hamster d mouse g shark b starfish e human h rabbit c snail f dung beetle i earthworm 10 Identify the two types of cnidarians. 11 Identify the largest animal phylum. 12 a State how many species of insects are known. b State whether you think there are any that are still undiscovered. c Justify your answer to part b. 13 List the main differences between centipedes and millipedes. 14 Identify an example of a mollusc. 15 Clarify the term parasitic. 16 Identify an example of an annelid. 17 Identify two invertebrates that live on land and two that live in the water.
Checkpoint
1 What is the main thing that biologists have used as a basis for classifying animals?
Vertebrates
2 Explain what a vertebrate is. 3 Identify the phylum that the vertebrates belong to. 4 Copy and complete the following sentences. a Animals that have a backbone of vertebrae belong to the subphylum _________. b The five main classes of vertebrates are amphibians, reptiles, birds, ________ and _____________.
Invertebrates
5 Explain the difference between a vertebrate and an invertebrate. 6 List the main phyla of the invertebrates.
Think
7 Identify three characteristics of each of the following classes. a amphibians d fish b reptiles e mammals c birds 8 Jimbia are animals with hair that lay eggs. Their young then develop in a pouch. Classify the jimbia.
Analyse
18 A new species of living thing is discovered and it is classified into the same group as an animal with six legs and wings. Identify the other features you would you expect the new species to have. Explain your answer.
168
19 If you discovered a new species of reptile, list the features it would have. 20 You are watching an animal and it lays an egg. a Identify the groups it could be in. b Explain what else you would need to place it in the correct group.
Surf
3 Find out more about the classification of the animal kingdom (and others) by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools selecting chapter 6, and clicking on the destinations button.
[ Extension ]
Investigate
1 Investigate more about the system used to classify books in the school library and propose what code number would be given to this book if it were in the library. 2 Use the information in Unit 6.3 to make a summary showing how animals are classified. a Gather and include several animal pictures for each group. b Present your information as a poster or PowerPoint presentation.
Creative writing
Australian animals
When European settlers first came to Australia they were surprised by some of the animals they found. Explain why this was. When you have found out why, write a letter as if you were one of those first Europeans describing Australian animals to someone in England who has never seen them.
UNIT
6.3
Prac 1 Unit 6.3
[ Practical activities ]
Perch dissection
Aim To investigate the internal organs of a fish Equipment
1 perch (or similar fish, e.g. mackeral, bream), dissecting instruments, newspaper, something to cover your clothes, gloves, dissecting board
The parts of a perch
Fig 6.3.22
Method
1 Cover your desk completely in newspaper with the board on top. 2 Put your protective clothing on and get your dissecting instruments ready. 3 Get your fish and place it on the board. 4 Observe your fish without cutting. Have someone in your group record your observations. Count how many fins there are. >>
anal fin anus bladder urogenital opening pelvic fin coelom
dder a i r b la gonad
stomach
pharynx
live
pelvic girdle
169
UNIT
6. 3
Animal classification
>>>
1st cut here to expose backbone
5 Make cuts as shown in Figure 6.3.23 to expose the backbone. You may need to scale some sections first. Only pick up the scalpel when you are ready to make a cut, and put it back down as soon as you are finished. 6 Turn the fish over and identify the anus. Make a cut from the anus towards the head. Be careful or you will disturb the arrangement of the internal organs. 7 Use Figure 6.3.22 to identify as many of the fishs organs as possible. Leave the head until last.
Fig 6.3.23
Questions
1 The air bladder can inflate and deflate. Explain how this helps the fish. 2 Were any organs difficult to identify? 3 Describe the features of the fish that make it suited for life in the water.
Equipment
Preserved invertebrate specimens
Equipment
Access to a computer, database programme (eg MS Access)
Method
1 Use the information in this book to identify as many invertebrates as possible. Try to identify the phylum even if you cant identify the class. 2 Make sketches of at least three specimens and write some characteristics of these organisms underneath your sketches.
Method
1 Design a draft table on paper to show all of the plant and animal kingdoms and phylum. Include their key characteristics, and examples of organisms in each group. Use the table on page 178 as a guide. 2 Present this draft to your teacher for assessment and feedback. 3 Redesign your table using the teachers suggestions. 4 Construct an electronic version of your database that can be used to sort or arrange the data in various ways.
170
6.4
In addition to the animal kingdom, scientific study so far has led to the separation or organisms into four other kingdoms: plant, fungi, monera and protists. None of these contains the great variety of species found in the animal kingdom but they are interesting nonetheless. The process of science is constantly changing, with many scientists splitting the moneras into two distinct kingdoms.
UNIT
context
nutrients around the plant. Most plants are in this phylum. The main classes of vascular plants are the angiosperms (flowering plants), conifers, cycads, gingkos and ferns. The angiosperms are in the class Angiospermae (angeion = small container, sperma = seed, in Greek). This is by far the largest class of vascular plants. Angiosperms always develop seeds inside the flower, the part that later becomes the fruit. The flowers of
The flower is the reproductive part of this plant.
Plants
Scientists have made many attempts to classify plants throughout history, but it was not until the invention of the microscope that a satisfactory system was created. Plants are now classified according to several characteristicshow they feed, their physical features and how they reproduce. The study of plants is called botany. Botanists tend to call the major groups of plants divisions but this word means the same as phylum. The main groups within the plant kingdom are the vascular plants and bryophytes.
Fig 6.4.2
Vascular plants
The vascular plants are in the phylum Tracheophyta (from the Greek, tracheia = windpipe, phyton = plant). Vascular plants contain vascular bundlescylindrical arrangements of transport cells that carry liquids and
Fig 6.4.3
anther filament
stamen
large vessel
sepal
Fig 6.4.1
171
>>>
The class Ginkgopsida (ginkgo = maidenhair tree, in Japanese) doesnt have many membersin fact, only one! Ginkgo biloba is a native plant of China. It bears its seeds in cones but, unlike other cone-bearing plants, it sheds its leaves in winter. Ginkgo biloba is now cultivated throughout the world and sold as a natural cure for circulatory problems.
Fig 6.4.5
Leaves on a Ginkgo branch
The ferns are in the class Filicopsida (filix = fern, in Latin). They have no seeds and reproduce through spores. The spore cases grow on the leaves and when they are ready they open and release their spores. These spores can give rise to new plants if they land in a good Prac 1 p. 175 place for growth.
Bryophytes
The bryophytes are in the phylum Bryophyta (bryon = moss, in Greek) and include the liverworts and mosses. These plants are generally quite small and dont have a well-developed vascular system or true roots. They are found in moist environments and generally prefer cooler places.
Fungi
Fig 6.4.4
A cycad
The fungi are a large group and are in the phylum Eumycota (eu = well, mykes = mushroom, in Greek). Fungi are not capable of
172
Harmful bacteriaanthrax
Fig 6.4.7
Protists
Fig 6.4.6
The death cap mushroom
photosynthesis so they cant make their own food. Like animals, they are heterotrophsthey must feed on other plants and animals to survive. Fungi include mushrooms, toadstools and moulds. Fungi reproduce by spores. Some are very useful. The mould penicillium gives us the valuable antibiotic penicillin.
Poisonous mushrooms
The most dangerous mushroom is Amanita phalloides, commonly known as the death cap. Normally a northern hemisphere plant, it has been found in Australia around Canberra and Melbourne. It has a yellowish to olive-green cap and is the cause of up to 95 per cent of all fatal mushroom poisonings. It doesnt kill straight away there are usually no symptoms until about ten hours after it has been eaten. Death can take up to four days.
The kingdom Protoctista (Greek: protos = very first, ktistos = to establish) is a strange kingdom in that its members are all the things that dont fit in anywhere else. This kingdom contains two phyla: algae (plant-like) protozoa (animal-like). All protists live in water. Organisms in this kingdom include seaweeds, slime moulds and amoebas.
Fig 6.4.8
Monera
The members of the kingdom Prokaryotae (from Greek: pro = before, karyon = seed, moneres = single) are also known as monera. All bacteria are in this kingdom. Bacteria are everywhere: in the soil, on your skin and in your intestines, to name just a few places. They can be helpful or harmful. The bacteria in your intestines help to digest your food. However, other types of bacteria can cause serious illness. This kingdom may soon be divided into two kingdoms, being the true bacteria (Eubacteria) and bacteria-like organisms (Archaebacteria).
173
UNIT
6. 4
>>>
Examples Characteristics Number Estimated total of species number of currently named species that exist
Chordates Cnidarians
Mammals (including humans), birds, reptiles, amphibians and fish Jellyfish Polyps Grasshoppers Spiders, crabs, snails Earthworms, leeches, hookworms
Vertebrates (have a backbone) Invertebrates Tentacles Hollow body cavity Invertebrates Exoskeleton Jointed legs Invertebrates Segmented bodies flat or round Vascular plants (transport system present) Nonvascular plants (no transport system) Multicellular Unicellular Autotrophic Heterotrophic Autotrophic, plant-like Heterotrophic, animal-like
Animals
1 300 000
10 000 000
Arthropods
Worms
Tracheophytes
Plants
270 000
320 000
Bryophytes
Fungi
Mushrooms, moulds, mildew Yeast Blue-green algae Bacteria Algae Protozoa Blue-green algae Streptococcus Seaweed, diatoms Amoebae, paramecium
72 000
1 500 000
Monera
4 000
1 000 000
Protists
80 000
600 000
UNIT
6. 4
Plants
[ Questions ]
Fungi
9 Explain how fungi are like animals. 10 A few fungi are parasitic. Explain what this means.
Checkpoint
1 State what the study of plants is called. 2 Identify a word for major group of plants. 3 Explain what is special about angiosperms. 4 Identify the part of the flower that contains the seeds in an angiosperm. 5 Explain what sort of seeds conifers produce. 6 State whether conifers occur naturally in Australia. 7 List three characteristics of bryophytes. 8 List the scientific names for the classes of vascular plants.
Monera
11 Explain with examples how bacteria can be helpful or harmful.
Think
12 Explain what is so special about protists.
174
Name of class
Vascular plants Angiosperms Conifers Cycadopsida Ginkgopsida Filicopsida Bryophytes Fungi Monera Protists Hydrangeas, eucalypts
Examples
Main characteristics
Contain cells that transport water and food around the plant.
Bacteria
13 Complete the table above to summarise the classification of plants. 14 Copy the following, correcting any incorrect statements so they become true. a A vascular bundle cannot transport anything. b Conifers thrive in hot climates. c There is only one plant in the ginkgo class. d Fungi reproduce with seeds. 15 Explain how ferns reproduce. Present your information as a diagram. 16 Identify three places where bacteria are found.
[ Extension ]
1 Choose one of the people listed below and investigate what they contributed to the classification of plants. Present a two-minute talk to the class about their work and contribution to scientific knowledge. Theophrastus Linnaeus John Ray Antoine Laurent de Jussieu 2 Research fungal infections of the body such as tinea and ringworm.
UNIT
6. 4
Prac 1 Unit 6.4
[ Practical activity ]
Dichotomous key of plants
Aim To construct a dichotomous key for plants from the local area Equipment
Plant specimens collected from home or around the school under supervision
Questions
1 Give your key and samples to a classmate. Assess whether they could successfully use your key to identify the plants. 2 Evaluate your key. How could your key have been improved?
Method
1 Examine your plants carefully and note some characteristics. 2 Create a dichotomous key to identify the different plants. Include sketches of the plant specimens. If you dont know their names, you can just call them A, B, C, etc.
175
UNIT
6. 4
6.5
context
Keys are models that scientists use to make their work easier and more consistent. We have already looked at some different types of keys. In this unit, we will look at why keys are used, and review the types already covered. A few new keys that scientists use will also be introduced.
This branching key is not dichotomous because it branches into three or four different groups.
UNIT
>>>
Fig 6.5.1
Why do scientists use a key? The main reasons are: A key makes it easy to identify an unknown object or organism. A key is easier to use than a page full of writing. We can see at a glance what characteristics each group has. All scientists anywhere in the world can use the same key to come up with the same answer (consistency).
mixed lollies
Jellybeans
chocolate coated
other
red
yellow
other
soft lollies
Minties
Smarties
Maltesers
Turkish delight
Fantales
Chocolate creams
If you use a key and you are finding it unclear or difficult to use, then it is not a good key. A good key is clear, simple and easy to use.
bird no does the adult have gills? no does it have a dry skin? yes its a reptile no its an amphibian yes
Branching keys
We have already looked at some branching keys. These are keys that get to a point and then branch off into smaller groups based on a choice made at that point. As stated earlier, a dichotomous key is one that branches off into only two groups at any point. Figures 6.5.1 and 6.5.2 are examples of a branching key and a dichotomous key.
its a fish
Fig 6.5.2
176
Tabular keys
We have also looked at an example of a tabular key. These are also sometimes referred to as go to keys. Like branching keys, the idea is to start at the top and work your way down, as shown in Figure 6.5.3.
1 2 3 4
has four legs doesnt have four legs eats meat eats grass wears clothes doesnt wear clothes has wings doesnt have wings
A tabular key to identify some animals
Circular key
One type of key that we have not yet looked at is the circular key. With this type of key you start in the middle and work your way outwards. The circular key in Figure 6.5.4 can be used to distinguish between certain animals.
Fig 6.5.3
bream
tiger shark
eats le p peo
African elephant funnel-web spider black can house kill spider cant kill huntsman black spider body flower spider mainly green hairy body
whale shark
big ears
small ears
elephant
fish
lives
jaw
s les
fis
hydra coral
redback spider
mainly black
multicoloured
lives on lan d
spider
ly on
cnidarian
jellyfish
animals
tiger
can live on both land and water commonly found in Australia not commonly found in Australia
octopus
poisonous
blue-ringed octopus
Indian tiger
frog
salamander
Fig 6.5.4
177
UNIT
6.5
only ater nw
More on keys
Lets say we wanted to use this key to identify the animal in Figure 6.5.5. We start in the middle, then move out to lives in water. After that we go to fish. From fish we go to bony fish. Then we go to large striped fins. This tells us the fish is a lionfish.
>>>
Classify this animal using the circular key in Figure 6.5.4.
Fig 6.5.5
UNIT
6 .5
Skills
[ Questions ]
insects
2 Given a square, circle, triangle, oval and octagon, construct a branching key to classify them.
small or no wings
3 Choose five different types of chips that you know and construct a dichotomous key to classify them. 4 Choose ten pieces of laboratory equipment and construct a dichotomous key to classify them. 5 Construct a tabular key to classify these people.
Fig 6.5.7
antennae to the rear grasshopper horned head rhino beetle not horned head
Fig 6.5.6
178
6 Use the following tabular key to classify the four cnidarians below.
7 Use the following circular key to find out what type of (fictional!) animal this is. Fig 6.5.9
branching arms go to 2
non-branching
Heliastra heliopora
8 eyes
disty
2 antennae
n ante o nna e
leaf-like arrangement go to 3
Astraea pallida
yista 1 eye
xero
1 head animals
2 heads
3 short stalk
Gorgonia
long stalk
feep
4 heads
1 mouth
yen
Pennatula
b a
din
8 Using the same key as in question 7, draw an example of an animal that could belong to each outer group. 9 Construct a circular key to classify these drinks.
d
Fig 6.5.8
Fig 6.5.10
179
UNIT
6. 5
More on keys
>>>
11 Construct a key to classify items in one of the following sets. all Rugby League jumpers flags of at least ten different countries a selection of stamps or coins Fig 6.5.11
10 Classify the plants shown below by constructing: a a dichotomous key b a tabular key c a circular key
180
Chapter review
[ Summary questions ]
1 Identify one living thing and one non-living thing. List at least three characteristics of each in a table. 2 Identify five organisms. 3 Identify two examples of endothermic and ectothermic animals. 4 Clarify the term excretion. 5 Explain why we classify things. 6 The largest groups of organisms are called kingdoms. List the smaller groups in order. 7 Explain the term species and give an example. 8 Explain what the binomial scientific name of an organism represents. 9 Identify the main groups of vertebrates and give an example of an animal in each group. 10 State the three main types of mammals. 11 Identify three groups of invertebrates and give two characteristics of each group. 12 Clarify the following terms: organism, stimulus, response, respiration, classification, phylum, taxonomy, vertebrate, exoskeleton, heterotroph.
[ Interpreting questions ]
21 You watch somebody running across a field being chased by a hungry lion. Identify which characteristics of life the person is showing. 22 You are standing by a campfire, listening to the rustle of the possums in the bushes, the crackle of the fire and the laughter of your friends. State whether all the things mentioned in this sentence are alive. Do any of the non-living things show any of the characteristics of life? Explain. 23 Dinosaurs are thought to have been reptiles. List the kinds of features you would expect them to have had if this is correct. 24 Some people believe that dinosaurs may have been warm-blooded. If this is true, explain what problems that would cause for their classification. 25 The first people to use the system of biological classification outlined in this chapter lived in north-west Europe. As more and more of the world became known to them, they had to change their system of classification. Can you explain why? 26 Imagine that you have spent a very long time studying the reptiles of Australia and have just published a book about them, containing a key to all the species. Explain the problems you would face if somebody discovered a new species of lizard in Australia. 27 Classify the following organisms in the animal kingdom. a dingo b red-bellied black snake c redback spider d kookaburra e platypus f kangaroo g Murray cod h yabbie i bat j sperm whale 28 Classify the following organisms in the plant kingdom. a apple tree b pine tree c tree fern d moss
[ Thinking questions ]
13 Both plants and animals use cellular respiration for energy. Explain why only plants undergo photosynthesis. 14 You accidentally touch a hot stove. Identify the stimulus and the reaction. 15 If you had a very large collection of music CDs, explain why it would be a good idea to invent a way of classifying them. 16 Explain an example from this chapter of how science ideas have changed over time. 17 Do you think all scientific ideas have changed over history? Identify and explain an example to support your answer. 18 Describe some evidence that supports the current five-kingdom system of classification. 19 Identify which technology used by scientists led to an increase in the number of kingdoms. 20 Explain what a key is and why scientists use them.
181
Forces
Key focus area:
By the end of this chapter you should be able to: describe what forces can do to an object describe what causes friction and identify situations where friction is an advantage or disadvantage use the terms mass and weight appropriately and recall the difference between them describe gravity in terms of its cause, and its effect on objects describe the forces that allow objects to float use the term force field accurately and be able to sketch the field around a magnet identify what happens when poles of different magnets are placed near each other.
7.1
context
We experience and use forces every day. Forces allow us to run, stand, write, open drink cans, and play sport. Riding a bike shows how forces can increase our enjoyment or if we take a fall, damage ourselves. If you fall, gravity pulls you down towards a heavy landing. The force of friction between you and the rough ground scrapes and cuts your elbows and knees. A bike helmet is the only thing that protects your head from the force of impact on the hard ground. So what are these forces that can be great fun or can cause damage?
UNIT
Introducing forces
Scientists say a force is something that changes motion. This means that a force can: get something to stop Example: You hitting the ground after falling off your bike. get something going faster (called acceleration) Example: Your bike as it goes down a hill. get something going slower (called deceleration) Example: As you put on your brake. change the direction that something is travelling in Example: As you go around a corner. twist or change the shape of something. Sometimes this change is permanent but often the object bounces back to its original shape. If this happens, we call the object elastic. Example: Your bike tyres squash and stretch as they go over bumps but return to their original shape. If you fall, your bones arent as elastic as tyres. They are unlikely to go back to their original shape, breaking or fracturing instead.
Forces in action
Fig 7.1.1
that they are affecting. These forces are non-contact forces. These forces act through a force field, and this does the pushing or pulling.
183
>>>
Fig 7.1.3
Springs can be used to measure forces.
NEWTONS 0
the ground pushes back on the bike
50 40 30
10 20
pedal force
air resistance
GRAMS 0 50
weight force
100
Fig 7.1.2
Forces are drawn as arrows, with the length showing the size of the force.
150
40
50
kg
60
184
UNIT
7.1
[ Questions ]
Think
9 Identify other words that mean the same as the terms acceleration and deceleration. 10 Identify three examples of situations where there are: a push forces acting b pull forces acting 11 Identify three examples of situations where an object: a accelerates b decelerates or stops c changes direction d changes shape permanently e changes shape for a short time but then bounces back to its original shape
Checkpoint
Introducing forces
1 Copy and complete: A force is either a _____ or a _____ or a _____. 2 Copy the following and modify any incorrect statements so they become true. a Force is needed to change the direction of an object. b Things naturally slow down. No force is involved. c A force is required to change the shape of an object. d Objects speed up when they fall because there is a force involved. e Twisting is caused by a force. 3 List the things you would you look for to tell if a force is being applied to an object.
Analyse
12 Look at Figure 7.1.4 and identify the statement that best describes what the force is doing in each case. A B C D E F starting movement or getting it to go faster stopping or slowing a moving object changing the direction of the object balancing another force, preventing movement changing the shape of an object causing a twist
>>
What is the force doing?
Fig 7.1.4
185
UNIT
7.1
>>>
d a car wreckage e wet mud f a diving board g a drinking glass 3 Examine a spring balance and explain how it works. Draw a simple diagram of its mechanism.
13 Draw small, simple sketches of the following situations: a weightlifter lifting a weight a spanner tightening a nut a nail being hammered a small child pulling along a toy a strong wind pushing your hair backwards a sliding door opening a football falling to the ground after it has been kicked a On each of your sketches, draw arrows to show the main forces. Indicate the size of the forces by using different length arrows. b Under each diagram, write words to describe the force as: a push or a pull contact or non-contact
Surf
4 Find out more about what forces are by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 7, and clicking on the destinations button.
Project
Roller ball
Your task is to build a structure that will allow a normalsized marble to drop a vertical height of 70 cm in as close to 20 seconds as possible: Your structure must stand by itself and cannot be higher or longer than 70 cm. The materials you can use are things that are readily available at home: cardboard boxes, tubing, plastic containers, glue, tape etc. The marble must pass across/through a minimum of four different materials/structures. You must label all forces that are involved in the trip: every push and pull.
[ Extension]
Investigate
1 Elastic means that an object will bounce back to its original shape once a force is stopped. Other materials are called inelastic materials. Explain what inelastic materials do when a force is applied to them. 2 Classify the following as either elastic or inelastic materials: a an elastic band b a crumpled piece of paper c plasticine
UNIT
7.1
Prac 1 Unit 7.1
[ Practical activities ]
Measuring forces
Aim To measure the force needed to do some common activities Equipment
Spring balance e Undo a Velcro tab. f Open different types of drawers. 2 Some of the forces may change as you measure them. If so, write the smallest and largest measurements you take. We call this the range of measurements. 3 Note that some of the forces may be too large or too small for you to be able to measure.
Method
1 Use a spring balance to measure the forces listed below. a Open and close different types of doors. b Pull off sticky tape stuck to a bench. c Pull your science textbook off the bench. d Lift or unzip your pencil case.
Questions
1 Look carefully at your results. Explain what factors made some measurements very large. 2 List the forces in order from smallest to largest.
186
2 Place a mark on the scale with no masses. Mark it as zero (no force). 3 Progressively add 50 g masses, marking the scale each time. 4 Since the scale is going to measure force, you will need to label the scale in newtons, not in grams. Use the table below to help you. This is called calibration of the scale. 5 Use the force measurer to re-measure some of the forces you measured in Prac 1.
Method
1 Build one of the following three designs:
cardboard
retort stand
50 g masses
150
Questions
1 Clarify the meaning of the term calibration. Explain why calibration is important.
wooden dowel
2 Compare your measurements in this prac with those taken in Prac 1. 3 Explain what happens to each of the designs when heavier objects are placed on them.
markings on dowel
rubber band
Fig 7.1.5
187
UNIT
7.1
7.2
context
Lots of things push and pull objects around. You can push your foot on the ground to increase the speed of your skateboard. You can pull on a rope in tug-of-war or on a zipper to close your fly. Gravity pulls all objects downwards, making them fall, while buoyancy pushes objects up so they float. Friction slows a skateboarder down, and magnets move steel cans around in a recycling plant. These are all forces that you have seen or experienced.
There are two forces acting on you right now, and they are equal in size and opposite in direction. This means that they cancel each other out so there is no overall force on you. You are not moving, because the forces are balanced.
Forces are balanced if they are equal in size but acting in opposite directions.
UNIT
>>>
Fig 7.2.2
chair pushes back with the same size force as the weight force
weight force
Fig 7.2.1
A balancing act
What forces are acting on you right now while you are reading this book? First, there would be the downward pull of gravity (sometimes called weight). Even though you cant see it, you know that gravity exists because if the chair broke you would fall down to the floor. You are not falling, however, because gravity is not the only force acting on you. The chair is also pushing you upwards. You can feel its push through the pressure on your backside. If forces in one direction are the same size as the forces in the opposite direction, they will balance. Forces are balanced on an object if it: is not moving is not getting faster or slower (we call this constant speed) is not changing direction is not changing shape.
Worksheet 7.2 Skateboarding forces the ollie
Prac 1 p. 190
188
7 In Figure 7.2.4 there are three objects that have no overall force on them. Copy these diagrams and add arrows to show how the forces cancel to provide no overall force.
Fig 7.2.3
Balanced forces
UNIT
7. 2
Fig 7.2.4
[ Questions ]
Checkpoint
A balancing act
1 Copy the following and modify any incorrect statements so they become true. a Forces are balanced when there is no overall force. b Forces are normally balanced when the forces are the same size and acting in the same direction. c If I am sitting on a chair, the only force on me is my weight force. d A car travels at constant speed when the force from the driving wheels balances the push backwards of the air (we call this air resistance) and friction between the road and the wheels. e A balanced force is needed if an object is going to accelerate. 2 Explain how you can tell if forces are balanced. 3 Describe what you would look for to check if forces are unbalanced. 4 Explain what will happen to a car moving at constant speed if all forces acting on it are balanced.
8 Draw simple sketches of the following situations and add arrows to show the balanced forces involved: a A student is lying on a couch. b A student leans against the wall. c A person is standing. d A hang-glider floats in the air. e A skateboarder is cruising at constant speed along a footpath. f A drop of water hangs from a tap. 9 Draw simple sketches of the following situations and add arrows to show the unbalanced forces involved. (Remember that the length of the arrow indicates the size of the force.) a A student sits back on only two legs of a chair. b A parachutist jumps from a plane but hasnt yet opened her chute. c A stone is dropped. d A passenger, not wearing a seatbelt, is involved in a car accident. e A parachutist is landing on the ground. 10 A class ran a tug-of-war. Who do you think would win in each of the following games? Provide a reason why you think that team won. a Three students went against another three students of equal strength. b Three went against four. c Ten students versus another ten students of equal strength. d Two versus ten.
Analyse
5 Look around you. Identify three things that are stationary and have no overall force on them. 6 A bike is slowing down to a stop. Explain why the forces on it must be unbalanced.
189
UNIT
7.2
>>>
Challenge
Wonky tower
Construct as tall a structure as you can using no more than 20 drinking straws. The structure must be able to stand without any other support and must be able to hold a 50 g mass at its very top. You can cut straws and can use pins or glue to join the straws, but you are not allowed any other materials. 1 Each joint in the structure has forces acting on it. Are they balanced? Why? 2 What very important non-contact force is acting on the structure and the object?
[ Extension]
1 The class tug-of-war continued. Who do you think would win these rounds and why? Fig 7.2.5
a b 2 people c
3 people
6 people 3 people d e 3 people 3 people 10 people 3 people 5 people 10 people 3 people 2 people 2 people 3 people
UNIT
7. 2
Prac 1 Unit 7.2
[ Practical activity ]
Tug-of-war
Aim To examine balanced and unbalanced
forces
mass a 3 masses b 3 masses c 4 masses 3 masses d 3 masses 3 masses 3 masses mass 3 masses 4 masses 3 masses
Equipment
Three pulleys and clamps, string/heavy cotton thread, metal washer/ring, 50 g masses
Method
1 Set up the apparatus as shown in Figure 7.2.6. 2 Attach the masses shown and support them until they are all attached. 3 Let all of the masses go at the same time. 4 Take note of any movement of the washer.
3 masses
Questions
1 Record the situations in which the washer did not move. 2 Explain what this suggests about the forces on the washer. 3 State the situations in which the washer did move. 4 Explain why this suggests that the forces were not balanced.
e 3 masses
2 masses 3 masses
3 masses
Tug-of-war
Fig 7.2.6
190
7. 3
You use friction every day but probably dont think about it. Imagine trying to walk if there was no grip or friction between your shoes and the floor. Imagine how fast you could go on your bike if there was no friction with the air or ground. There could also be problems if there were no friction between your brake pads and the wheel rimthe brakes wouldnt work!
UNIT
context
Introducing friction
Friction is a force between two sliding or rolling objects that acts to slow the objects down. A bike will come to a stop if it is not peddled; your school bus will stop if the driver turns the engine off. In these two cases the force of friction will be greater than the force trying to keep the object movingthat is, the unbalanced Prac 1 forces will cause the bike or bus to slow p. 194 down and eventually stop. Friction is the force caused by the roughness of surfaces and always acts in the opposite direction to the objects movement. What a drag! Some surfaces have a lot of When something moves through air it needs to push friction because they are very the air out of the way and rough. If we try to slide one then around it. The air ce rough surface over another, passing over the surfa has its own friction force, the bumps and hollows catch called air resistance or on each other and slow it drag. Cars and commercial to down. aircraft are designed ise the drag to save minim Smooth surfaces have on fuel consumption, and bumps and hollows jet fighters and arrows are too, although their designed to travel as fast as possible. An object is roughness can called streamlined if it cuts often only be through the air with little air seen under a Prac 2 resistance or drag. p. 195 microscope.
Fig 7.3.1
Even smooth surfaces have bumps and hollowsan electron microscope view of the surface of a plastic contact lens.
motion
friction
Fig 7.3.2
Friction can also wear away parts of a surface remember what happens when you fall onto the gravel or asphalt. This can also be a problem in machines, since their parts will gradually wear out with time. The wheels and peddles on bikes and the wheels on skateboards all have parts moving across
191
>>>
the ground. This way the hovercraft can travel over extremely rough surfaces (ground or water) without slowing down because of friction.
A hovercraft uses a blanket of air to reduce friction.
Fig 7.3.4
Reducing friction
We would travel further and faster, and machines would be more efficient, if we could reduce the friction between their moving parts. There are a number of easy ways of reducing friction. Friction occurs because of the roughness of the surfaces that try to slide over one another. If the hollows are filled in, the surfaces become smoother and will slide over each other much more easily. This happens when the surface is lubricated with oil or grease. Polishing and waxing make the surface smoother by removing some of the bumps and filling up some of those hollows that catch and cause friction. Wheels, rollers or ball bearings also reduce friction. Ball bearings allow your skateboard or inline skates to roll more freely by reducing the friction, allowing you to go as quickly as possible.
There is less friction if wheels spin on bearings.
Useful friction
So far, friction seems to be a problem force. But friction can work for us too. On your bike, you need to make sure the brakes are in good condition so that the friction of the brake pads against the rim is high. The condition of the tyres also contributes to the safe operation of the bike, as friction between the tyres and the road allows the bike to go forward and around corners. The type of tyres is also of great importance when the ground is rough and loose. Mountain bikes use a wider, blocked tread to gain more grip, as shown in Figure 7.3.5.
Fig 7.3.3
The most effective way of reducing friction is to stop the surfaces touching each other at all. A hovercraft does this by squeezing a blanket of air underneath it so that the craft loses contact with
Fig 7.3.5
192
What happens to a car that is trying to move on an icy road? Its wheels spin but does the car move? Can it be controlled once it is in a skid? When we try to move forward, whether we are in a car, on a skateboard or walking, we need to push backwards.
If the surface is rough, friction pushes back against our foot and pushes us forward. We get traction and traction moves us forward. If the surface is smooth then we lose traction: we simply cannot get moving or control our movements and we slide and skid. We have nothing to push off.
Useful friction
4 Clarify the term traction. 5 Friction allows us to do many things. List at least ten situations in order from greatest frictional force to least. 6 Identify a device that needs friction to work.
Think
7 State five examples of objects that naturally slow down (or stop) because of friction. 8 State five examples of surfaces that have very little friction between them. 9 Friction makes hinges on a door squeak, allows us to write with a pencil and to file our nails. Explain each of these situations using scientific terms. 10 A snowboarder hates friction but a cyclist is happy its there. Explain why. Fig 7.3.6 11 List three machines or devices that would benefit from using bearings in their wheels.
We need friction between our foot and the ground to move forward.
UNIT
7. 3
Analyse
12 In a world without friction, predict what would happen to: a objects that you hold on to. b pieces of wood nailed together. c pieces of wood screwed together. d your doona or blankets through the night. e your shoelaces. f the way you move across a room. g the way you stop. 13 List the disadvantages of friction as a force. 14 Predict the order from most to least friction for the blocks in Figure 7.3.7. Fig 7.3.7
[ Questions ]
Checkpoint
Introducing friction
1 Copy and complete: Friction is a force caused when two surfaces 2 Copy the following and modify any incorrect statements so they become true. a Friction is caused by bumps and hollows of the surfaces catching on each other. b Smooth surfaces have no bumps or hollows. c Friction causes a moving object to speed up. d Friction is a non-contact force. e Drag slows a moving object. f Streamlined is a word used to describe shapes that cut through the air easily.
C oil
Reducing friction
3 Construct a table to summarise the different ways that friction can be reduced.
193
UNIT
7.3
>>>
[ Extension]
Investigate
1 Investigate why weightlifters put chalk on their hands when attempting a heavy lift. What other sports use chalk to assist the participant? 2 Investigate why snowboarders wax their boards. Find other sports where this happens. 3 Car brakes get hot after driving in the city. Investigate how disc and drum brakes work. List the advantages that disc brakes have over drum brakes. 4 The tread on car tyres helps to increase friction or grip in wet conditions. When conditions are dry, the tread actually reduces friction: in these conditions, racing cars put on slicks with no tread. Explain why tread is only important in the wet. 5 When we drive in snow, we often are required to put chains on our tyres. Research why.
Surf
7 Find out more about the forces involved in skateboarding by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 7, and clicking on the destinations button.
Creative writing
Overnight scientists have discovered that friction has disappeared! What can we expect today in this new, frictionless world? Create a short piece of writing on friction. You must explain: 1 what friction is 2 how you intend to move about and stop 3 what will happen to structures (will nails hold and screws stay in?). Write your piece as either: a diary page about your exploits after getting out of bed a newspaper front page explaining what is happening in the world
Create
6 How did the gangs of slaves in ancient Egypt move the massive blocks of stone across the desert to build the pyramids and temples? Construct a model demonstrating how you think these large blocks were shifted over the sand.
or a pamphlet from the government explaining to residents how to cope in this strange new world.
UNIT
7. 3
Prac 1 Unit 7.3
[ Practical activities ]
Bumps and hollows
Aim To investigate the smoothness of surfaces Equipment
2 x A4 sheets of paper, light cotton line or fine string, sticky tape
tape string tape tape tape
Fig 7.3.8
Method
1 Tape a piece of A4 paper to the bench to hold it in place. 2 Tape 30 cm of cotton line to the edge of the other piece of paper.
tape tape tape
>>
string
194
3 Use the cotton line to pull the top sheet across the bottom one. 4 Now carefully fold the top sheet as a concertina, as shown in Figure 7.3.8. 5 Repeat the experiment with both sheets folded as a concertina. 6 Record your observations in the table.
Bottom sheet
Smooth Smooth Folded
Top sheet
Smooth Folded Folded
Question
Write a statement about what makes it difficult to slide things over each other.
Measuring friction
Prac 2 Unit 7.3
Fig 7.3.9
Protractor, wooden blocks, selection of different materials (bare wood, carpet, various grades of sandpaper, rubber grip material), ramp, lubricants such as detergent, non-stick spray, cooking oil, wooden dowels etc
ramp
Method
1 Construct a table in your workbook with the following headings:
Material Angle
benchtop
2 Predict which material would have the least friction and which would have the most. Arrange them in order in the table. 3 Place a wooden block on the wooden ramp. 4 Slowly lift one end of the wooden ramp until the block is just about to slide. 5 Measure the angle between the ramp and the desk with a protractor. 6 Place one of the selected materials on the ramp and repeat the experiment. 7 Repeat with all the other materials.
Extension
8 Repeat the experiment, but this time lubricate the surface instead of making it rougher. 9 Run another experiment, placing the block on wooden dowels to act as ball bearings.
Questions
1 What happened to the angle as you changed the roughness of the surface? 2 Explain your answer in terms of friction.
195
UNIT
7.3
7. 4
context
Youre on your bike travelling along at high speed when you unexpectedly hit a rock. You lose control, and as the bike flies out from under you there is only one way to go down! You have to love gravity.
In effect, gravity makes things fall down. Of course, down depends on where we are on Earth!
UNIT
>>>
Mass
Prac 1 p. 200
Introducing gravity
Gravitational force is a non-contact force that attracts objects to each other. In the above example you are attracted to the ground. Although normally a very small force, gravity becomes significant when we are near a large object such as a planet like Earth, a moon or a star like the Sun.
Mass is the amount of matter in an object. Unless we break the object up or add things to it, the mass of an object never changes. Thats massive! Astronauts, for example, can A Boeing 747-400 (the jumbo) flies non-stop be weightless in space, but from Sydney to Los Angeles their body mass has not every day using almost all changed. its 173 000 kg of fuel on its 14-hour, 13 000 km Mass is normally measured journey. On take off, its in kilograms (kg), maximum mass (aircraft, but sometimes is measured in passengers, cargo and fuel) is 400 000 kg. This is the grams (g) for smaller things, equivalent of 258 Holden or tonnes (t) for very large Commodores! objects. We often use the terms mass and weight interchangeably in everyday speech. They are, however, different things.
Fig 7.4.1
Weight
Weight is the name given to the pulling force on a mass caused by gravity. Weight is a force and depends on two things: the mass of an object the gravity on the object. To find the weight of an object you multiply its mass by gravity:
Weight = mass x gravity W =m x g
On Earth, gravity is about 10 m/s2, and therefore you would need a force greater than 10 newtons to lift a 1-kilogram mass. Like all other forces, weight is measured in newtons (N).
Worksheet 7.3 Pressure
196
Gravity and weight get less as we go further away from the Earth.
70 kg 0.8 N
Fig 7.4.2
Commercial aircraft 10 km
70 kg 686 N 70 kg 683.8 N
70 kg 608 N
Earth
2 km 70 kg 685.5
Because weight is a force due to gravity, you must use gravity to measure it. You allow gravity to stretch or squash a spring to give you a measurement.
Prac 2 p. 200
197
UNIT
7. 4
Gravity
>>>
5 Identify the direction in which the weight force is pointing.
0 100 200 300 400 500 600
0 10 20 30 40 50 60 70 80 90 100
6 Weight depends on two things. State what they are. 7 Distinguish between mass and weight.
10
Think
8 Copy and complete: All things fall at the _____ rate unless _____. 9 Explain how mass and weight can be measured. 10 Clarify the term weightlessness. 11 In space, does an astronaut have less mass or weight? Explain. 12 The following comment was overheard in a Year 7 class recently: Of course 1 kg of lead is heavier than 1 kg of feathers! Its lead, isnt it? Explain why the student has got it wrong and how they may have come to have this opinion.
50 40 20 10 0
A beam balance (top) measures mass, a spring balance (bottom) measures weight.
Fig 7.4.3
13 Copy the following and modify any incorrect statements so they become true. a Weight is measured in grams. b Kilogram is a unit for mass. c Weight is a force. d The weight of an object is the same everywhere you go. e Gravity does not depend on how far you are from a planet. f There is no gravity on the Moon. 14 List the three things gravity depends on. 15 Identify where on Earth you think gravity would be the greatest and where the least. 16 All things fall at the same rate due to gravity. a State one observation that supports this statement. b State an observation that does not support this statement.
UNIT
7. 4
Mass
[ Questions ]
Checkpoint
Introducing gravity
1 Clarify the term gravity. 2 Clarify the term mass. 3 State common units that are used to measure mass.
Analyse
17 The gravity on the Moon is only one-sixth the gravity on Earth. Explain what this suggests about the mass of the Moon. 18 List three activities you could do on the Moon that on Earth you normally would find difficult.
Weight
4 Identify whether weight is: a a push force or a pull force b a contact or non-contact force
198
19 Three ballsa tennis ball, a cricket ball and a shotput were dropped at the same time. The experiment was photographed on the way down, but unfortunately only the tennis ball was recorded on film. Complete the photographs by predicting where the other objects would be at the same time as the tennis ball. Fig 7.4.4
tennis ball
2 Research and record the world records for: a the largest mass that a man and a woman have lifted b the heaviest thing living at this moment c the smallest living thing d the heaviest of the dinosaurs e the heaviest ship ever built 3 Investigate how gravity keeps planets such as Earth revolving around the Sun and the Moon revolving around the Earth. 4 In science fiction movies, you often hear of a spacecraft being caught in the gravitational field of a planet. NASA often does this to change the direction of its deep space missions. Investigate how NASA does this.
cricket ball
shot put
Creative writing
Skills
20 An astronaut has a mass of 75 kg. Calculate his weight on earth if gravity is 10 m/s2. 21 Calculate your weight using your own mass, if gravity is 10 m/s2. 22 Complete the following table using the formula for weight:
weight = mass x gravity
Weight
Mass
5 kg 2 kg
Gravity
10 m/s2 10 m/s2 10 m/s2
Imagine a world without gravity. Nothing would fall down. Create a piece of writing about a world without gravity. You can produce either: a pamphlet for umpires explaining the rules of a sport invented for a world without gravity a diagram or model of a gravity-free home, bathroom or toilet a set of rules for going to bed without gravity and a design for the bed or a poster of exercises to keep astronauts fit and to stop their muscles getting weaker while on long space missions.
10 N 20 N 14 N 100 g 2 kg
10 m/s2 10 m/s2
Project
Strength
Find the stretch and strength of one of the DYO following objects: a plastic supermarket bag sticky tape a nylon fishing line an elastic band. You are to draw a line graph of the stretch obtained as the masses were added. Mark clearly the mass required to break the object.
[ Extension]
Investigate
1 Research and record the masses in kilograms of: a an average adult man and woman b an average newborn baby c an average family car
199
UNIT
7. 4
Gravity
>>>
[ Practical activities ]
Falling objects
Aim To see if all objects fall at the same speed
Prac 1 Unit 7.4
UNIT
7. 4
Method
9 Drop the 50 g mass and the paper ball and record your results again. 10 Crumple the paper into a very tight ball and repeat the experiment.
Equipment
50 g mass, a range of different objects that will not break if dropped
Questions
1 Identify the column in which you placed most of the objects. 2 Identify the type of objects that fluttered on the way down. 3 Explain why you think they did that. 4 Identify whether any masses fell faster than the 50 g mass. If so, Explain why. 5 Complete this sentence: Most objects fall at the same rate as/faster than/slower than a 50 g mass.
Objects that flutter instead of dropping
1 Collect a range of objects of different masses and different shapes and sizes. 2 Drop the 50 g mass and one of the other objects at the same time from the same height. Ensure that the objects fall onto something soft so as to reduce any damage. 3 Make the drop as high as possible. 4 Repeat with all the objects, until you have compared every object with the drop of the 50 g mass. 5 Arrange the objects in the following table:
A lot faster than the 50 g mass About the same as the 50 g mass A lot slower than the 50 g mass
6 Describe the only difference between the sheet of paper, the loosely crumpled ball and the tight ball. 7 Identify which dropped slowest. Explain why.
6 Now drop the 50 g mass and a single sheet of A4 paper at the same time and from the same height. 7 Add these results to the table. 8 Now crumple the paper into a loose ball.
8 Draw a conclusion by completing these sentences: Objects that catch the air fall ______ than objects that do not. Objects that do not catch air fall ______.
Object
Aim To accurately use a beam balance and spring balance to find the mass and weight of different objects
Equipment
Beam balance, spring balance, a variety of objects of different weights and sizes
Questions
1 State the maximum mass that could be recorded using the beam balance. 2 State the maximum weight that could be recorded using the spring balance. 3 Copy and complete: The weight of an object was about _____ times the mass of the object.
Method
1 Use the beam balance to measure the mass of each of the objects. 2 Now use the spring balance to measure the weight of each object. 3 Record all your measurements in a table like the one opposite.
200
Air above the wing rushes across the upper surface of the wing to catch up with the air travelling below the wing Lift This fast-moving air creates a LOW PRESSURE compared to the air under the wing.
Thrust
Drag
Weight Air on the underside of the wing moves more slowly. This slowly moving air is at HIGH PRESSURE compared to the faster-moving air above the wing.
Motion Airflow
Fig SF7.1
201
Jump!
1
When the skydiver first jumps from the aeroplane they are pulled down by Earths gravity. Their speed is low, so air friction is small. The skydiver accelerates downward, gaining speed.
Fig SF7.2
2
The skydiver continues to gain speed and the air friction increases. When they are travelling very fast, the air friction pushing them up becomes equal to gravity pulling them down. This means the forces are balanced and the skydiver no longer accelerates, but continues to fall at a constant speed. This speed is known terminal velocity.
Terminal velocity
3
The moment the skydiver opens their parachute, the air friction increases greatly as more air molecules collide with the parachute. Air resistance is now far larger than gravity. This causes the skydiver to slow down until air friction pushing upwards once again becomes equal to the weight pulling downwards. Fortunately for the skydiver, this is at a much slower speed than when they first opened their chute.
Slowing down
University doing research into a new form of propulsion system called a scramjet (super sonic scramjet). The scramjet is a more efficient engine as it uses oxygen from the air, and does not have to carry much fuel. The Australian team, working on a
shoestring budget, have shown great innovation and creativity to make good progress. In 2002 they conducted a successful trial of the scramjet, known as HyShot, using a rocket launched from Woomera. The scramjet project is supported by NASA and many other sponsors.
202
Enormous rockets are used to propel the space shuttle through Earths lower atmosphere and into orbit.
Fig SF7.3
Fig SF7.4
Launch of a HyShot rocket from Woomera, carrying an experimental scramjet engine being developed by Queensland University
[ Student activities ]
1 Many objects are caused to move, change direction, speed up, slow down or stop due to forces acting on them. a In small groups create two lists. i Methods or devices that use forces to get objects moving. ii Methods or devices that use forces to control the motion of an object, or stop it moving. b For each of the devices in your list, write a short description of how they use forces and attempt to name the forces involved. 2 Draw an aeroplane wing and include arrows on your diagram to demonstrate the size and direction of forces in the following situations: a during take-off b accelerating at a constant altitude c just before touchdown 3 Because most flying machines require air to operate, they are restricted to flying at particular heights. Research the maximum height that can be safely reached for the following flying machines: small helicopter small propeller-driven aeroplane large helicopter small military jet large commercial jets. Try to find out which aeroplanes fly highest in the atmosphere. Record your information in a table. 4 a Investigate the forces produced by a rocket. b Use a series of diagrams to create an information brochure demonstrating how a rocket engine works. Make sure you show the forces acting on the rocket. c Build a working model rocket. Try using a film canister, Alka-Seltzer tablets and water. You will find many examples on the Internet. 5 Australia was once among the leaders in rocket science and one of the first to launch a satellite into orbit around the Earth. Complete one of the following activities. a Research and describe how an understanding of forces now makes it possible to place a satellite in a stable orbit around the Earth. b Investigate and record any major contributions made by Australia to producing new forms of propulsion systems. Be sure to include some information on the Queensland University work on the scramjet.
203
7. 5
There are two special forces involved when objects are placed in water. The force that allows you to sit on your surfboard and float while waiting to catch a wave is known as buoyancy. The other force, called surface tension, allows you fill a glass above the rim without it spilling Prac 1 and enables some insects to walk on water. p. 206
UNIT
>>>
context
buoyancy
Buoyancy
A lump of steel sinks if it is placed in water, yet a ship made from steel floats. How is this possible? This is because the ships weight is balanced by the
weight
Fig 7.5.2
buoyancy
weight
water pushing upwards on its hull. The Prac 2 force that keeps the ship from sinking is p. 206 called buoyancy. A ship would definitely sink if it were solid steel: steel is more dense than water, so it sinks. The hull is hollow, however, and contains air, making the ship less dense than the water it floats in. Water gives the ship its upward buoyancy force, which then balances the downward weight force of the ship. As the ship is loaded, it gets lower and lower in the Dead mans float water. If it is loaded too If we want to float in much, or if the hull is holed a pool we always breathe in, filling and fills with water, it will our lungs with air. If we get sink. The buoyancy force is rid of all the air, we wil l generally sink: the bu now not enough to balance oyancy is now not enough to the weight of the ship, and keep us afloat. down the ship will go.
Surface tension
Water creates a film or skin on its surface. This skin is often strong enough to keep afloat objects that would normally sink and can make water take on shapes that are quite unexpected.
Prac 3 p. 207
Fig 7.5.1
204
All water particles have, between them, a force of attraction, called cohesion. This holds the water particles together. Cohesion at the surface is called surface tension and is sometimes strong enough to form a skin. Drops of water can hang from a tap without falling, we can fill a glass above the lip and small insects can walk on water because of the skin that surface tension creates.
Worksheet 7.4 A paper boat
UNIT
7. 5
Buoyancy
[ Questions ]
Surface tension being used by a pond skater
Checkpoint
1 Copy the following, correcting any incorrect statements so they become true. a Gravity is the force that keeps a ship afloat. b An iceberg stays afloat because its buoyancy balances its weight force. c A ship will sink if its weight is greater than its buoyancy. d Small objects often float because they are very dense. 2 Explain the term buoyancy in your own words. Fig 7.5.3
Analyse
10 Plimsoll lines are lines painted on the hull of a ship to show where the waterline should be under different conditions. Below is a diagram of a partly loaded ship. Copy this diagram and draw and label Plimsoll lines for: a when the ship is empty b when the ship is fully loaded c a safe line for a ship expecting heavy and dangerous seas.
Plimsoll lines on a container ship
Surface tension
3 Explain what cohesion is. 4 State what cohesion at a surface is called. 5 Identify what this cohesion at the surface forms. 6 List three places where you have seen surface tension in action.
Fig 7.5.4
Think
7 Organise this list into a table that classifies the following objects into those that float on water and those that sink. a a small pebble b a house key c a paperclip d a cork e a drop of car oil and a drop of cooking oil f a cricket ball g a book and a sheet of paper h an ice cube i a leaf j an inflated balloon and a deflated balloon 8 Explain what density has to do with buoyancy. 9 What happens to the water level on a ship as it is loaded? Explain.
LT LS LW LWNA
LTF LF L
TF F R
T S W W
11 How does a steel submarine float on top of the water while it is in harbour? 12 When out at sea, the submarine dives. Explain what the crew must do to allow it to dive.
205
UNIT
7. 5
Forces in water
>>>
[ Extension]
Investigate
1 It is impossible for a person to sink in the Dead Sea on the Israeli/Jordanian/Palestinian border. It is also recommended that people with small cuts or open wounds do not swim there because it would be very painful for them. Investigate what is strange about the Dead Sea that could account for these two facts. 2 When a piece of newspaper is dropped in water, it will probably float, but after a while it will sink. Examine this phenomenon and explain what is happening.
Create
3 Using a sheet of A4 paper (or a piece of aluminium foil of the same size), design and build a boat that can hold the greatest number of paperclips. Run a competition between class members to find out who has the best boat.
UNIT
7. 5
Prac 1 Unit 7.5
[ Practical activities ]
What water does
Aim To investigate buoyancy and surface tension Equipment
Table tennis ball, balloon, bucket/pneumatic trough/large sink, thin test tube, bubble-making equipment, detergents, glycol
Prac 2 Unit 7.5
Method
1 Try to hold a table tennis ball under water and an inflated balloon under water. 2 Observe a drop of water hanging from a tap and a small amount of water on the bench. 3 Observe the top of the water in a half-filled test tube and a test tube filled until it is brimming. 4 Make some bubbles using various detergents and glycol mixtures. Determine which mixture was the best in making the largest bubbles. 5 Carefully draw diagrams of each situation.
Method
1 Copy the table below into your workbooks.
Questions
1 Identify each case as an example of either buoyancy or surface tension at work. 2 Propose two ways each in which surface tension and buoyancy may be useful. 2 Seal the empty flask with the cork/rubber stopper. 3 Place an elastic band tightly around the neck of the conical flask. Use it to attach the hook of the spring balance. 4 Weigh the sealed conical flask. 5 Lower the conical flask into a large container of water.
>>
206
Fig 7.5.5
6 Record your observation of what is happening to both the flask and the reading on the spring balance.
spring balance
50 40 20 10 0
7 Progressively add more water to the flask and repeat the above.
Questions
1 State the weight of the empty flask in air.
stopper flask
2 Describe what you noticed about the flasks weight as it was lowered into the beaker of water. Explain. 3 Draw a diagram of all the forces on the flask as it was lowered into the beaker of water.
ice-cream container filled with water
4 State how full the flask was when it just sank. 5 Explain why the buoyancy force is sometimes insufficient to keep objects afloat.
2 Carefully place a pin on the surface of the water. Record what happens.
3 Now add more water very slowly and carefully until it is brimmingthat is, the water is actually above the lip of the beaker. 4 Place your eye level with the surface of the beaker and draw what you see. 5 Carefully rest a pin on the edge of the beaker and see if you can get the other end to float on top of the water. 6 If you cannot make it float, carefully use another pin to push it into the centre of the beaker. Keep trying if at first you dont succeed. 7 Record your observations of the water around the pin. 8 Repeat the experiment but now place a small amount of washing detergent on the surface. Record your observations and explain the effect of the detergent. 9 Place a mixture of milk and water into an aluminium tray to cover the base. 10 Allow it to settle, then place one drop of food colouring in the centre of the milk. Using an eyedropper place a single drop of detergent in the middle of the food colouring. 11 Observe and record what happens.
Equipment
Two fine pins, 250 mL beaker, detergent, eyedropper, aluminium tray, milk, food colouring
Method
1 Fill the 250 mL beaker with water until it nearly reaches the top. Fig 7.5.6
How to make a pin float
Questions
250 mL
1 A pin normally drops to the bottom of a beaker of water. Explain why. 2 With care, the pin floats. Use the idea of surface tension to explain why. 3 If pushed too hard, the pin once again sinks. Explain what has happened to the surface tension now. 4 For the milk experiment, use surface tension to explain the effect the detergent had on the food colouring.
207
UNIT
7. 5
7. 6
Magnets exert an invisible force that is strong enough to push or pull without even touching. This force is called a magnetic force. It is a non-contact force that has many uses. You would have felt the pull of a cupboard door just before it closes, or the pull of the rubber magnets that are on the fridge door. These magnetic forces attract only over a short distance between the magnet and the metal.
UNIT
>>>
context
Introducing magnets
Magnets can: attract metals containing the elements iron, nickel or cobalt. Steel is a common metal which contains a high percentage of iron. Magnets therefore also attract steel. pull the ends of other magnets towards them (attract), or push the ends of those same magnets away (repel)
Iron filings in the magnetic field of a bar magnet
Fig 7.6.1
Magnetic like poles repel (top), magnetic unlike poles attract (bottom).
Fig 7.6.2
208
would point in the field. Scientists show the direction of the field with arrows that point away from the north pole and into the south pole.
Fig 7.6.4
Bar magnet showing the force field with small compasses
N
N
S
S S
Fig 7.6.3
This can be done by: stroking the piece of iron or steel repeatedly, in the same direction, with another magnet lining up a piece of iron with the north and south poles of the Earth and gently tapping it leaving the iron in the core of an electromagnet. If magnets are dropped, hit or heated, the domains can be knocked out of alignment and the magnetism is lost. Permanent magnets are made from harder steel or cast iron where the domains are more resistant Prac 2 p. 212 to being knocked.
These lines never cross and come straight out of any surface. Lines that are close together show strong fields. Weak fields have their lines widely spaced. Magnetic fields are strongest at the magnets poles and get weaker as we move Prac 3 p. 212 further away from them.
Magnetic Earth
The ancient Chinese, Romans and Greeks all used lodestone (a natural magnetic rock) as a primitive compass to help them in their navigation. Although used less now than in the past, compasses are still used in navigation. Compasses are actually small magnets that are allowed to move. The compass needle aligns itself with the Earths Watch it! field lines and can be used to The fine inner workings find north or south. of a watch can easily be destroyed if a strong This suggests that the magnet comes nearby. interior of the Earth is actually The backs of watches a magnet, with its own are always made from stainless steel to shield magnetic field flowing from the mechanism from the south pole to the north magnetic fields. pole
Magnetic fields
Non-contact forces must have a method of moving other objects without touching them. This happens because there is a force field around the magnet. This magnetic field is the area around a magnet where a magnetic force is felt. Magnetic field lines show the direction an iron filing or a compass needle
209
UNIT
7. 6
S
N S N N N
N
S N S N S N N S
N N
S N S N N
S S
Magnetic forces
>>>
Making and destroying magnets
Earths magnetic north pole
geographic axis
true north pole
7 Explain the term domain. 8 Describe how a material can be made magnetic. 9 Use a drawing to explain what the word align means.
UNIT
7. 6
Introducing magnets
1 Suggest how magnets were given their name. 2 Identify whether magnetic forces are contact or non-contact forces. Explain your answer. 3 List the three metals that can be attracted to magnets.
Magnetic fields
10 Draw magnetic fields for a bar magnet and a horseshoe magnet. 11 Identify where the magnetic field on a magnet is strongest and where it is weakest.
Magnetic Earth
N
12 Predict what the Earths core is made up of, given that the Earth has a magnetic field. 13 Explain how a compass works.
Think
14 Copy the following and modify any incorrect statements so they become true. a The north pole of a magnet will attract other north poles. b Compasses are actually small magnets. c The area around a magnet is called its poles. d The ends of a magnet are called its magnetic field. e Domains must be aligned for a piece of iron to be a magnet. f The Earth does not have any magnetic field. 15 Magnets need to be stored carefully. Propose a set of recommendations for how they should be stored. 16 Steel ships often accidentally become magnetised while they are being built. Propose reasons for how this happens. 17 The Aurora Australis is an amazing show of lights in the night sky that only happens at the South Pole. It happens when particles from space follow the magnetic field of Earth until they enter the Earths atmosphere. a Draw the magnetic field of Earth, indicating where the field is strongest. b Indicate where the field lines actually touch Earth, and predict where on the Earth you would expect to see an aurora.
Bar magnets and the Earth have similar magnetic fields. The symbol at the top left shows the way a compass reacts in the Earths magnetic field.
Fig 7.6.5
[ Questions ]
Checkpoint
210
[ Extension]
Investigate
1 Investigate what you think the word ferromagnetic might mean. (Hint: Use the periodic table to find the chemical symbol for iron.) 2 Most permanent magnets are made from an alloy called Alnico. a Use a periodic table to identify the meanings of the chemical symbols Al, Ni and Co. b State the three elements that the alloy Alnico contains. c Propose a reason why each one might be included. 3 Research the uses of electromagnets in simple electrical devices such as doorbells and telephones. Produce a report to explain how these electromagnetic devices work. 4 Screwdrivers and screws are often accidentally magnetised when an electrical device such as a power drill has been operating nearby. Investigate how an electric motor works and how it could affect a screwdriver. 5 The north pole is not exactly where a compass points! Explain the difference between the geographic and magnetic north poles. 6 Investigate how magnetism is used to record sound and images in cassette tapes, computer disks and videotapes. Draw a series of diagrams to show how these devices record information.
Surf
7 Find out more about compasses and make your own by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 7, and clicking on the destinations button.
UNIT
7. 6
Prac 1 Unit 7.6
[ Practical activities ]
Attracting and repelling
Aim To investigate the two poles of a bar magnet
N
Equipment
Watch-glass, 2 bar magnets
Method
1 Balance a magnet on the back of a watch-glass. 2 Hold another magnet near the poles as shown and record your results in the table below.
Magnets attract and repel.
Fig 7.6.6
South pole
Questions
1 Propose a rule for the attraction and repulsion of magnetic poles. 2 Explain the term poles.
211
UNIT
7. 6
Magnetic forces
>>>
Magnetic fields
Aim To observe magnetic fields
Prac 3 Unit 7.6
Getting magnetic
Aim To make an object magnetic
Prac 2 Unit 7.6
Equipment
A permanent magnet, a large nail, small pins or paperclips, polystyrene, cork or other floating material, bucket or ice-cream container
Equipment
A wooden board or bench mat, 1 sheet of waxed lunch-wrap, bar and horseshoe magnet, fine iron filings (preferably in a shaker), either access to a 200300 W spotlight to be used as a heat source (CAUTION: the spotlight will be extremely hot)
Method
1 Repeatedly stroke the large nail with the same end of the magnet, lifting it high at the end of each stroke. Count the number of strokes you make. 2 Keep stroking until the nail is able to attract some pins or paperclips. 3 Now rest the nail on a float such as a piece of polystyrene. 4 Carefully rest the float on water in a bucket or ice-cream container. 5 Check the direction the nail points with that of a standard compass. Fig 7.6.7
A compass is simply a magnet.
Method
1 Place a magnet on the board or bench mat and lay a sheet of the waxed lunch-wrap over the magnet. 2 Sprinkle a small amount of the iron filings onto the sheet, gently tapping the sheet to spread them out around the magnet. 3 Shine the spotlight onto the sheet to melt the filings into the wax. 4 You now have a permanent record of the magnetic field of the magnetpaste it into your workbook. 5 An alternative is to use hair spray to fix the iron filings to the paper. (CAUTION: check whether any students are allergic to perfumed hair sprays.)
Questions
1 Identify where the magnetic field was the strongest. 2 Identify and describe any positions on the magnet where no (or very few) filings were attracted. 3 Describe what you noticed about the strength of the field further away from the magnet.
Questions
1 State the number of strokes you made to magnetise the nail. 2 Describe whether the nail successfully acted as a compass. 3 Describe how you could check.
212
Chapter review
[ Summary questions ]
1 Match the words with their correct meanings. Force Spring balance Friction Newton Lubricant Heat Sandpaper Kilogram Balanced forces Balance Caused by rough surfaces sliding A unit of mass Reduces friction Forces that add up to zero Push or pull Causes large friction Produced by friction A unit of force Measures mass Measures weight e The gravity on the Moon is less than on Earth. f Weight is measured in kilograms. g All objects have their own gravity and pull all other objects towards them. h A ship floats because its buoyancy balances its weight. i Buoyancy is a downward force. j Drag always makes objects go faster. 3 Classify the examples below according to whether friction can be seen as an advantage or a disadvantage. a stopping in a hurry b pushing a fridge across the floor c running a car engine d parachuting from a plane e turning quickly on your bike 4 Complete the following table to summarise how forces are important in our everyday lives. Give two examples for each type of force.
2 True or false? a Mass and weight are the same. b Gravity depends on the planet we are on. c The mass of an object depends on where we are in the universe. d There is no gravity on the Moon.
>>
Type of force
Push
Where used
Skateboarding
How it works
Skateboarder pushes ground with foot to move forward
Pull
Friction
Gravity
Magnetic
Buoyancy
213
>>>
[ Thinking questions ]
5 Reducing friction would make machines more efficient. Explain what is meant by this statement. 6 When we swallow food, there is a lot of friction from our throat. Explain what makes swallowing food easier. 7 Describe three ways in which a magnet can be made. 8 Explain how magnets can lose their magnetism. 9 Draw the magnetic field that exists around a bar magnet. 10 Explain what a compass is and how it can be made. 11 Identify three ways in which friction may be reduced. 12 Explain three situations in which it is important to be able to reduce friction. 14 Draw small, simple sketches of the following situations. On each, draw all the forces that are acting. a A kite is flown. b A basketball is thrown towards the goal. c A magnet affects a compass. d A fish is hauled in on a line. 15 Calculate the weight of a person on Earth who has a mass of 80 kg, if gravity is10 m/s2. 16 An astronaut has a mass of 91 kilograms on Earth. a Calculate their weight. The astronaut goes into space on a mission. b What would be their mass in space? c What would be their weight in space?
Worksheet 7.6 Forces crossword Worksheet 7.7 Sci-words
[ Interpreting questions ]
13 For each of the diagrams below, identify whether it shows: push pull friction drag buoyancy surface tension weight magnetic force
214
>>>
4.1, 4.9.1
4 How hot is it on the Sun? 5 The Moon has seas that are not
really seas. What are they?
8. 1
context
For thousands of years ancient astronomers saw points of light that appeared to move among the stars. They called these planets, meaning wanderers, and named them after the Roman gods. If you look up at a clear night sky, you too will be able to see many of the planets that the ancient astronomers saw. You might also see an assortment of space junk and satellites that also move in the night sky. Today we use telescopes to have a close look at the planets and sometimes send probes to visit them. Because of this we have a much greater understanding than before of Earth and the eight other planets of the solar system in which we live.
UNIT
>>>
Another ancient Greek, Aristarchus (310230 BC) questioned the geocentric model and proposed instead a model in which the Earth and other planets revolved around the Sun. This is known as a heliocentric model (helio = Sun). Aristarchus also thought that the Moon went around the Earth. The geocentric model continued to be favoured until the end of the fifteenth century. Those who suggested otherwise were often in danger from the religious authorities, who thought that humankind and Earth had to be the centre of everything. In the 1530s, Polish astronomer Nicolas Copernicus (14731543) agreed with Aristarchus and suggested that the Earth and other planets orbited the Sun. There was fierce opposition to his ideas.
Saturn
Ce
ia l le s t
t ar
s
Moon
Venus Mercury
Sun
Copernicus model
216
Galileo (15641642) was a strong supporter of Copernicuss ideas, and in 1609 he used a telescope for the first time to make detailed observations of the Moon and planets. His observations exposed errors in the geocentric model. The Danish astronomer Tycho Brahe (15461601) did not support Copernicuss heliocentric theory and took numerous detailed measurements of the positions of stars and planets in an attempt to Tycho Brahes nose improve the geocentric model. Body piercing may be Ironically, using Tycho Brahes thought of as a modern data, German astronomer Johannes fashion trend but in Kepler (15711630) finally the late 1500s Tycho Brahes gold and silver showed that Copernicuss idea of a nose must have caused heliocentric model was correct. In 1566 his real
a stir. nose was cut off in a sword duel with another student over who was the better mathematician.
once on its axis is called its day, and the time taken to orbit the Sun once is called its year. All the planets have days and years of different lengths. The four innermost planets are called terrestrial (meaning Earth-like) and orbit the Sun in almost circular orbits. The other, outer planets move in elliptical or oval orbits. All planets move in the same plane (a large imaginary flat surface) except for Pluto, whose orbit is tilted by about 17 compared to the other planets orbits. For this reason, some astronomers think that Pluto should not be classified as a planet. The larger outer planetsJupiter, Astronomical unit Saturn, Uranus and Neptuneare The average distance from known as the gas giants, because the Earth to the Sun is their outer layers are composed of called an astronomical unit, or AU for short, and equals gases such as hydrogen and helium.
The term solar system takes its name from the object at the centre of it allthe Sun, also known as Sol. The nine planets of the solar system, in order starting from closest to the Sun, are: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune and Pluto. One way of remembering this list is to use a sentence like the following, which may sound a little crazy, but helps us remember the order (such a sentence is called a mnemonic): My Very Early Morning Jog Starts Up Near Phillips. The planets each orbit the Sun, rotating on their axes as they do so. The time taken for a planet to spin
Fig 8.1.2
The planets to scale. The rings of the gas giants are not shown.
Following is a series of fact files for the planets that were known by ancient civilisations and which we will call the ancient planets. All can be observed by the naked eye. The diameter measurements are made at the equator for each planet. For comparison, the diameter of the Sun is 1 392 000 km. The symbols used for each planet are still used by astrologers and were invented by the Greeks, who imagined each planet to be a god.
149 600 000 kilometres. It was introduced by Copernicus and later defined by Cassini in 1672. To appreciate this distance, if you travelled at 100 kph it would take about 170 years to cover the distance.
Mercury
Mercury was known in ancient Sumer (now Iraq), some 5000 years ago. Since the planet moves very quickly across the sky, it was named after the Roman god, Mercury, who was the swift messenger of the gods.
Symbol for Mercury
Fig 8.1.3
217
UNIT
8 .1
>>>
Mercury showing its heavily cratered surface
Fig 8.1.4
Mercury
Fact file
Mythology Mass Moons Diameter Surface God of travel, commerce and thieves 0.056 times that of Earth None 4878 km ( = 0.38 x Earths diameter) Similar to Earths moon, with craters, lava-flooded plains and smooth mountains Mainly helium, which blows past Mercury from the Sun 0.38 times that on Earth 170C to 430C 59 Earth days 0 0.39 AU (58 million kilometres)
Mercurys missing rock Mercury is the second-smallest Scientists believe planet in the solar system and is Mercury has an iron the closest planet to the Sun but it core 75 per cent as large as the planet itself. interestingly, is not the hottest. Earth has a much lower Because it is so close to the Sun, it iron content. If both is often hard to observe, appearing planets were formed at as a morning or evening star. about the same time, Mercury should contain Mercury is in many ways similar more rock and less to Earths Moon, with a surface iron, so where did the containing craters, plains, and no missing rock go? Possible explanations atmosphere of its own. The are that the rock was Mariner 10 space probe flew past swept away by gas at Mercury three times in 1974 and the time Mercury was formed, or was 1975, photographing more than vaporised by a young half the planets surface. The Sun, or was blasted Messenger space probe was off by a collision with launched in 2004 and is the first an asteroid. spacecraft to have orbited the planet. Messenger will investigate Mercurys geology, atmosphere and magnetic field.
Venus
Venus was recorded by the Babylonians in approximately 3000 BC and it is also mentioned in the astronomical records of the ancient civilisations of China, Central America, Egypt and Greece.
Fig 8.1.5
Atmosphere Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun
218
Venus
Fact file
Mythology Mass Moons Diameter Surface Goddess of love and beauty 0.815 times that of Earth None 12 103 km ( = 0.95 x Earths diameter) Extensive cratering, volcanic activity. Mountain ranges, a 1500 km trench. 80 km thick layer of carbon dioxide with some water vapour. Clouds contain concentrated sulfuric acid droplets. 90 times that on Earth (enough to crush early space probes) 0.9 times that on Earth 460C 243 Earth days 30 0.72 AU (108 million kilometres)
used radar imaging to map 99 per cent of the planets surface, which cannot be observed using telescopes because of Venuss thick cloud layer.
Earth
The third planet from the Sun,Earth is known as the blueor water planet and is the only planet currently known to support life. The Earth has a molten core topped by floating plates that make up its surface, 70 per cent of which is under water. The Earth is orbited by the Moon and many communication satellites.
Symbol for Earth
Atmosphere
Fig 8.1.7
Atmospheric pressure
Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun
Fig 8.1.8
Venus, the hottest planet, is a similar size to the Earth, but would be very inhospitable for humans, with its acidic and crushing atmosphere. Apart from the Sun and Moon, Venus (when visible) is the brightest object in the sky and is known as the morning and evening star. Venus is unusual for several reasons. It spins in the opposite direction to the Earth and other planets (that is, from east to west) and a Venus day is longer than its year. Mariner 10 flew past Venus on its way to Mercury in 1974. More recently, the Magellan Venus Orbiter
219
UNIT
8 .1
>>>
Earth
across the sky gave ancient astronomers problems because it was sometimes direct and sometimes backwards (called retrograde motion). This was, however, explained by Kepler in 1609. The Viking 1 and Viking 2 space probes landed on Mars in 1976 after orbiting the
Fig 8.1.10
Fact file
Mythology Mass Moons Diameter Surface Atmosphere Gaiamother Earth 1.0 times that of Earth (5 980 000 000 000 000 000 000 000 kg) One (the Moon) 12 756 km Two-thirds water, one-third land 78% nitrogen, 21% oxygen, 1% carbon dioxide, argon and water vapour and other gases 1.0 times that on Earth Average 22C 1 day 23.5 1 AU (150 million kilometres) 365.25 days
Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun Time to orbit Sun (year)
Mars
Mars is the red planet and has been the subject of numerous science fiction movies. Perhaps Mars should be called the rusty planet, as its red appearance is due to Symbol for Fig 8.1.9 rust (iron oxide) in its Mars surface soil and rocks. There are some similarities between Earth and Mars. A Martian day is only 30 minutes longer than an Earth day, and its 25 tilt causes seasons similar to Earths, only twice as long. The movement of Mars
The Sojourner rover sampling the large rock known as Yogi on Mars in July 1997
Fig 8.1.11
220
planet and were used to look for signs of microscopic life. The results of these investigations are still being debated. In July 1997 the Pathfinder mission landed on Mars and placed a six-wheeled robotic rover, named Sojourner, on the surface to gather information about the rocks and weather. In September 1999, the Mars Climate Orbiter disappeared while orbiting Mars. In 2003 two rovers, Spirit and Opportunity, were launched to search for evidence of liquid water at different regions on Mars. Further Mars space probe launches are planned in the future.
Jupiter
The largest of the planets, Jupiter has a diameter more than 11 times that of the Earth. Ancient astronomers named the planet Jupiter, for the ruler of the gods in the
Fig 8.1.12
Mars
Fact file
Mythology Mass Moons Diameter Surface God of war 0.107 times that of Earth 2 (Phobosdiameter 23 km, Deimosdiameter 10 km) 6794 km ( = 0.53 x Earths diameter) Soft red soil containing iron oxide (rust), giving the planet its red appearance. Cratered regions, large volcanoes, a large canyon and possible dried-up water channels. Polar caps of frozen carbon dioxide and water. Very thin, mainly carbon dioxide 0.376 times that on Earth 120C to 25C 1.03 Earth days 25.2 1.52 AU (228 million kilometres)
Atmosphere Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun
Jupiter showing alternating east and west wind belts. The Great Red Spot is the large oval shape.
Fig 8.1.13
Roman state. It is famous for its Great Red Spot, which is really a giant hurricane about three times the size of the Earth. In 1977, two space probes, Voyager 1 and Voyager 2, were launched. In March 1979, Voyager 1 flew by Jupiter and detected a
221
UNIT
8 .1
>>>
Saturn
Hes at it again!
Remember Hooke from his discovery of cells? He was also one of the first men to build a Gregorian reflecting telescope and used it to discover a star in the constellation of Orion. Because of his telescope observations in 1664 he also suggested that Jupiter rotated on its axis. His detailed sketches of Mars were used in the nineteenth century to determine its rotation speed.
Jupiter
Fact file
Mythology Mass Moons Ruler of the Gods 318 times that of Earth At least 28 moons and four rings, including the four largest moons: Io, Ganymede, Europa and Callisto. These are known as the Galilean moons. 142 984 km ( = 11.21 x Earths diameter) Liquid hydrogen Hydrogen (84%) and helium (15%). Upper layer contains white clouds, probably composed of solid ammonia. 2.525 times that on Earth Cloud top 150C 9 hours 55 minutes 3.1 5.2 AU (778 million kilometres)
Saturn is the secondlargest planet in the solar system and is one of the most recognised due to its impressive ring system, which was discovered by Galileo in Symbol for Fig 8.1.14 1610. The rings are only Saturn tens of metres thick, but have a diameter of 270 000 kilometres. The rings are thought to be composed of particles of ice and icecovered rock, from tiny particles to large rocks. Like Jupiter, it is a world of gas, a planet so light it would float on water. The space probe Voyager 2 detected over 100 000 rings when it flew by Saturn in 1981.
Saturn
Fact file
Mythology Mass Moons Diameter Surface Atmosphere Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun God of agriculture 95.184 times that of Earth At least 30 moons and rings in seven bands 120 536 km (= 9.45 x Earths diameter) Liquid hydrogen. Winds up to 1800 km/h Very thick layer of hydrogen and helium 1.064 times that on Earth 180C 10 hours 39 minutes 26.7 9.6 AU (1400 million kilometres)
Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun
222
Uranus
Fact file
Mythology Mass Moons Diameter Surface Atmosphere Gravity Surface temp. Tilt of axis Distance from Sun
Saturn showing the cloudy atmosphere and the separation between the two bright rings (the Cassini Division)
Father of Saturn 14.54 times that of Earth At least 21 moons and 11 rings 51 200 km (= 4.01 x Earths diameter) Likely to be frozen hydrogen and helium Hydrogen, helium and very turbulent, with winds over 600 km/h 0.903 times that on Earth 220C 98 19.2 AU (2875 million klm)
Fig 8.1.15
Uranus
Symbol for The English astronomer Uranus Fig 8.1.16 William Herschel accidentally discovered Uranus in 1781. Uranuss axis is tilted at an angle of 98, so it virtually lies on its side as it orbits the Sun. This tilt gives Uranus the strangest seasons of all the planets, with each season lasting 21 years. Like Saturn, Uranus has a large number of moons, and a ring system that is quite faint in comparison. Voyager 2 discovered additional moons and rings when it flew by in 1986.
Fig 8.1.17
Uranus showing the vertical rings and moons (white) orbiting the planet
223
UNIT
8 .1
>>>
Neptune
Fact file
Mythology Mass Moons Diameter Surface Atmosphere God of the sea 17.15 times that of Earth 8 moons and 5 rings 49 528 km ( = 3.88 x Earths diameter) Frozen hydrogen and helium Mainly hydrogen, helium. Very high winds over 600 km/h 1.135 times that on Earth 220C 16 hours 7 minutes 29.3 30.1 AU (4500 million kilometres)
Neptune showing its blue-green atmosphere. The Great Dark Spot seen at the centre is about 13 000 km by 6600 km in size.
Fig 8.1.19
Pluto
Pluto is the outermost planet and was found by American scientist Clyde Tombaugh on 18 February 1930. It appeared as a dim star that slowly changed its position against the fixed stars as it went on its 248-year orbit around the Sun. Since it was sighted it
Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun
Planet X
For several years, many scientists believed there was an undiscovered planet, Planet X, beyond Pluto that was responsible for unexplained deviations in the orbits of Uranus and Neptune. When Voyager 2 provided more accurate information about the masses of Uranus and Neptune, it was discovered that both planets were heavier than first thought. New calculations using these more accurate masses were then able to explain the deviations in orbit, ending support for the existence of Planet X.
Fig 8.1.20
has completed about a third of its orbit of the Sun. Pluto has an unusual orbit that actually comes inside Neptunes orbit for 10 per cent of the time. Pluto is the smallest planet.
224
There are plans for a probe to be launched in 2006 to arrive at Pluto in 2015. Recently there has been debate as to whether Pluto is a planet or a comet trapped by the Suns gravitational field.
Extrasolar planets
As of July 2003, about 117 planets have been located revolving around other stars outside our solar system. Several of these are in what are called habitable zones around their parent stars, where the temperature would permit water to remain in a liquid state. Perhaps life exists on one of these planets.
Pluto
Fact file
Mythology Mass Moons Diameter Surface Atmosphere Gravity Surface temperature Period of rotation (day) Tilt of axis Distance from Sun God of the underworld 0.002 times that of Earth 1 (Charon) 2300 km ( = 0.18 x Earths diameter) Icy crust of methane Very thin, if any 0.061 times that on Earth 223C 6 Earth days 122 39.6 AU (5914 million kilometres)
UNIT
8 .1
[ Questions ]
Worksheet 8.1 Saturns rings Worksheet 8.2 History of astronomy
Prac 1 p. 227 Prac 2 p. 227
Checkpoint
Theories of the solar system
1 Identify three astronomers who proposed that the Earth and other planets revolved around the Sun. 2 Explain what you think the underlined part of the following words means. a geocentric b heliocentric 3 Describe the difference between a geocentric and a heliocentric model of the solar system using a diagram. 4 Many scientists believed for long time that the planets revolved around the Sun, yet they did not speak up. Explain why you think this was.
7 List the planets in order from: a largest to smallest b closest to most distant from the Sun
>> 225
UNIT
8 .1
>>>
k is two-thirds under water l has the most impressive ring system m was discovered because it was noticed that a neighbouring planet strayed from its orbit n has a day that is longer than its year o has the strongest gravity p is known as the morning and evening star q is the most dense 20 Identify which planets have: a moons b ring systems c methane in their atmosphere 21 Choose any three planets. Construct a table like the one below and enter the data for each planet.
Planet name
Mass Diameter Surface Atmosphere Gravity Surface temperature Moons Period of rotation Distance from Sun Time to orbit Sun
Think
12 Identify an object that is much smaller than a planet and which condensed from a cloud of interstellar gas and dust. 13 Identify three space probes, and at least one planet visited by each. 14 Identify the space probes that disappeared in 1999. 15 There is less information available about the outer planets than the inner ones. Explain why. 16 Propose a reason why it is unlikely that life exists or has existed on planets other than Earth. 17 Estimate the diameter of Plutos moon, Charon, and its distance from the planet using Figure 8.1.21. (Hint: the diameter of Pluto is 2300 km.)
Skills
18 Construct a table to summarise the main astronomers in this unit. Include three columns for their name, date and a description of their ideas and discoveries. 19 Identify which planet: a is the hottest b is the coldest c has a giant hurricane raging that is larger than the Earth d doesnt have its own atmosphere e spins the opposite way to all the others f has a similar day length to the Earths g spins on its side as it orbits the Sun h has a crushing atmosphere i has a rusty surface j is covered by a thick yellow layer composed mainly of carbon dioxide
__________
__________
__________
Create
22 Construct a three-dimensional model of the solar system using common spherical objects.
[ Extension]
Investigate
1 a Calculate planet sizes or distances from the Sun for a scale diagram of the solar system that will fit on poster paper. b Construct your scale model on paper. (Hint: you may need to change one of the scales to make it fit.) c Explain why it is not convenient to have both size and distance to scale. 2 a Investigate what or who each planet was named after. b Construct a booklet that summarises this information, including pictures of each planet and the person or object the planet was named after.
Action
3 Money spent on space exploration would be better spent on things like medical research and aid programs. Research what this statement means and have a class debate on this issue.
226
Surf
Find out more about the solar system by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 8 and clicking on the destinations button. 4 Construct a model of a space probe such as the Cassini spacecraft that is currently on its way to explore Saturn. 5 Investigate the planets further through pictures, games and information on the Internet.
Creative writing
Postcard from another planet
The year is 3000 and you are on holidays at a resort on another planet in the solar system. Construct a postcard, complete with stamp, and write a letter describing your holiday to someone back home on Earth.
UNIT
8 .1
Prac 1 Unit 8.1
[ Practical activities ]
A model solar system
Aim To represent the relative sizes and distances of the planets Equipment
Modelling clay, model information from Unit 8.1, a basketball to represent the Sun, photocopy of street map of the local school area, trundle wheel
Prac 2 Unit 8.1
Method
1 The classification used in Unit 8.1 was according to historyancient and modern planets. 2 Reclassify the planets according to the following rules. a Sizesmall planets have diameters less than 13 000 km, and large planets greater than 13 000 km. b Compositionrocky or terrestrial planets, and gas planets. c Distance from the Sunthe inner planets and the outer planets. The asteroid belt is the separating boundary. 3 Write a key for identifying the planets from their descriptions. 4 Use someone elses key to identify the planets and evaluate whether their key is effective.
Method
1 Split into small groups of students. 2 Copy the scale model information from the fact file for each planet into one table. 3 Using clay or play dough, make a model of each planet according to the size in the scale model. 4 Obtain a street map of the local school area. Decide where the Sun will be located and use the scale of the map to find the position of the outer five planets. 5 Go outside and place the Sun in position. 6 The inner planets should be placed in position from the Sun within the school grounds. Measure the distance for each planet using a trundle wheel. 7 Ask your teacher whether your group may place the outer planet models in position outside the school grounds. Measure the distance for each planet using a trundle wheel and check your street map to see if this is correct. Otherwise, mark on the street map where the other planets should be located.
Questions
1 Describe any problems that you had when classifying Pluto.
Questions
1 For the outer planets, did the distance measured by the trundle wheel agree with the position marked on your street map? 2 Compare the spacing of the inner planets to that of the outer planets.
227
UNIT
8 .1
Fig SF8.1
Fig SF8.2
Nearly all early cultures had their own ideas on the stars and planets. Most studied the way they moved across the night sky, and many were worshipped as gods. Others used observations of their motion to make predictions about events such as the seasons. The available evidence suggests that astronomy (the study of the motion of the stars and planets) began around 3000 BC when the Mesopotamians, Egyptians and Chinese grouped stars together into constellations (collections of stars). Large structures like the pyramids and Stonehenge, constructed about 2500 BC, show how important the motion of the Sun and other objects in the night sky was to these ancient humans.
For the Pitjantjatjara tribe, originally inhabiting the Western Desert area, the Pleiades' first appeared in the east, just before dawn, was a signal that the dingoes would be having pups. The people would then know that, if they searched the dingo lairs, they would find newly born pups. For the Aboriginal tribes in the south-east of Australia, their dreaming story for the Pleiades (now commonly called the Seven Sisters), had the stars as seven young women. They believed that the young women had shown a lot of courage and insisted on doing all the tribal initiation rites that the men had to do. In honour of their bravery they were placed into the heavens together after their life on Earth, to act as a role model for others.
228
Ptolemy with Urania, the Goddess of astronomy. Ptolemy is holding a quadrant used for measuring the altitude of stars. In the bottom left corner is an astrolabe for measuring the altitude and position of stars and planets.
The Ptolemy model predicted that Antares, a red star in the constellation of Scorpio, should be in the position where the thumb tip is. Ptolemys model was accurate enough to predict that Antares would be found somewhere within the circle, formed when the hand is rotated around the thumb.
Fig SF8.3
The Polish astronomer Nicolaus Copernicus began to examine all the available astronomical data and Ptolemy's model. Copernicus thought that Ptolemys model needed too many modifications to make it accurate. He suggested that this model could not truly reflect a perfect design from God. Copernicus produced a short paper in 1514, where he proposed his solution: a heliocentric model with the Sun at the centre. But Copernicuss ideas were frowned upon and viewed by some in the Church as heresy. Copernicus continued to work on his heliocentric theory, completing a book in 1530. Because the Church disapproved of his ideas, his book was not published until 1543. Copernicus only saw a printed copy of the book on the day he died. The book was eventually banned in 1616 and placed on the Church's official Index of forbidden books, where it remained until 1835.
229
Pages from the book published by Copernicus in 1543 that described the heliocentric model of the solar system
Fig SF8.5
1
Fig SF8.7
Jupiter and the two Galilean moons, named after Galileo, who first viewed them through a home-made telescope
Slow to change
Despite the banning of Copernicuss book, copies had become available. When the Italian, Galilei Galileo, read the book, he found that it made good sense and became a strong supporter of the heliocentric model. Galileo made a telescope and used it to examine the Moon and Jupiter. He showed others the mountains and craters of the Moon, and the moons orbiting around Jupiter, both of which were contradictory to what the Church believed. Galileo was condemned by the Church and forced to publicly declare that he was wrong to believe in a heliocentric model, and that he had misled others with the images they had seen through his telescope. He was kept under house arrest for the rest of his life. Galileo was finally given a reprieve by the Church in 1993. Better late than never!
[ Student activities ]
1 We only know a few of the ideas and stories that Aboriginal people had regarding the stars and planets. a Think of and record reasons why this is the case. b Discuss your ideas with classmates. c Research to find more information about Aboriginals and astronomy by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 8, and clicking on the destinations button. 2 The Milky Way is spectacular from a very dark location. a Research the Milky Way. Explain what it is and why it lights up the night sky so brightly. b Find a story that involves the Milky Way and retell it by writing a picture story book. 3 In his effort to get his idea across without causing more trouble with the Church, Galileo d use a poem to describe his ideas about the motion of the planets and stars. This got him getting into even more trouble. Imagine you are Galileo and first see the Moon with a telescope. Using the image of the Moon, write a short poem to try to describe it. 4 a Describe three reasons why most early people, and the church officials, could not believe that the Earth was in orbit around the Sun. b Design and perform an experiment or measurement to prove that the Earth is moving around the Sun and not the Sun around the Earth. 5 One of the brightest stars in the night sky is AlphaCentauri. This star is found in the Pointer to the Southern Cross. Use the Internet to investigate and record any interesting information on Alpha-Centauri and give reasons why it might be considered special.
Fig SF8.6
230
8. 2
context
Historically many cultures have recognised the Sun as a god, demon or spirit. Whatever role the Sun takes, most cultures see it as the prime controller of all life on Earth. It is true that we depend on the Sun to supply the energy that has allowed life to flourish on Earth.
UNIT
Fig 8.2.2
The Sun showing a spectacular solar flare about 588 000 km across the solar surface
Fig 8.2.1
cells can now convert the Suns energy into other forms of energy and are being used more and more widely as technology improves their efficiency. As well as heat and light, other types of radiation such as ultraviolet (or UV) radiation reach us from the Sun. The Earths atmosphere screens out much of this harmful radiation, and provides an insulating layer to trap heat. Different parts of the Earth heat up by different amounts, creating pressure differences in Free-floating planets the atmosphere, which in turn Astronomers have create winds that increase recently discovered evaporation, leading to rainfall. several planets that do The Sun also provides the not appear to be orbiting stars but just drift massive gravitational force through space. necessary to keep the Earth and other planets in orbit around it.
1 AU
Sun
Like all stars, the Sun produces energy in reactions in its core. The temperature and pressure at the core cause hydrogen particles to fuse or join together and form helium. This reaction releases a huge amount of energy and is called nuclear fusion.
231
The Sun
A million Earths
The term nuclear is used because each particle referred to above is really the centre, or nucleus, of a hydrogen atom. You will study more about atoms later in Science.
It would take 1.3 million Earths to fill the inside of the Sun, and 109 Earths would fit in a line across the Suns diameter.
>>>
Features of the Sun
Several features of the Sun may be Rotation rates Different parts of the Sun observed from the Earth using rotate at different rates. special solar telescopes. The solar equator rotates CAUTION: Although we can once every 26 days, see these features from Earth, you while the Suns polar regions rotate once should never look at the Sun every 37 days. unless you are using special protective apparatus, as you can permanently damage your eyes. In 1611 Galileo observed for the first time sunspots and solar flares on the Suns surface. Sunspots are depressions on the Suns surface that appear darker because they are several thousand degrees cooler than the surrounding gas. The number of observable sunspots follows an 11-year cycle, and varies from zero to about 200 in a year. Solar flares come from sunspots and can reach a height of hundreds of thousands of kilometres above the Suns surface. These Prac 1 can cause interference with radios and p. 234 television on Earth. Prominences are a larger type of solar eruption and consist of a streamer of glowing gas. They can be observed from Earth during a total solar eclipse. Solar flare The Suns atmosphere radiation Due to a solar flare, consists of three main layers passengers in an aircraft as shown in Figure 8.2.4. The may receive radiation layers are: the visible surface of equivalent to that of one the Sun or photosphere; a thin medical X-ray. ring around the edge of the Sun, called the chromosphere; and a
Solar statistics
The term solar is used to describe things associated with the Sun. The Sun is a star, but because it is much closer than other stars, it appears much larger and brighter.
Sun
Fact file
Mythology Mass Diameter Gravity Surface temperature The Sun God. Greeks called it Helios 333 400 times the mass of the Earth 1 392 000 km ( = 109 x Earths diameter) 28 times that on Earth 6000C (average). From 4500 to 2 000 000C up to 15 000 000C in the core. 122
Scale model
Diameter 300 millimetres
Earth
corona (1 000 000C2 000 000C) chromosphere (4500C1 000 000C) photosphere (5000C)
Sun
Sun
Fig 8.2.3
Fig 8.2.4
232
faint halo extending out a great distance, known as the corona. The corona includes clouds of gas called prominences. The Sun is constantly emitting a stream of particles into space at speeds of about 500 kilometres per second. These solar winds send particles towards the Earths north and south polar regions, where they interact with gas particles in the atmosphere to cause
Fig 8.2.5
Aurora Australisthe Southern Lights
spectacular light displays called aurorae. One such display occurs in Antarctica and is called the Southern Lights or Aurora Australis.
Solar eclipses
The word eclipse comes from the Greek word for abandonmentthe eclipse was seen as the Sun abandoning the Earth. There are three types of solar eclipses. A total solar eclipse is when the Sun is covered by the Moon. A partial solar eclipse is when the Moon covers only part of the Sun. An annular solar eclipse occurs when the Moon is at its greatest distance from the Earth. All solar eclipses occur when the Moon comes between the Earth and the Sun and the Moons shadow falls on the Earth, as shown in Figure 8.2.7.
Moon
Fig 8.2.6
Moon Sun
Fig 8.2.7
There are three types of solar eclipse. Solar eclipses can occur up to twice a year but do not all happen in the same place.
day
UNIT
8.2
[ Questions ]
Checkpoint
The importance of the Sun
1 Identify two types of energy provided by the Sun. 2 Plants and animals both depend on the Sun for food. Explain how.
>>
233
UNIT
8 .2
The Sun
>>>
13 The Sun is less dense than the Earth. Explain how this can be when the Sun is much bigger and has a much larger mass. 14 List the following in order from closest to most distant from the centre of the Sun: chromosphere, photosphere, corona. 15 a Identify the region of the Suns outer atmosphere that is the hottest. b State the maximum temperature that may be reached there.
3 If there had been no Sun, explain why there would also be no oil deposits inside the Earth. 4 Name a harmful type of radiation from the Sun.
Solar eclipses
9 Draw a diagram to demonstrate the view from Earth during: a a partial solar eclipse b an annular solar eclipse
[ Extension]
Investigate
1 Investigate where an aurora other than Aurora Australis occurs, and what it is called. 2 Investigate what the Ulysses probe is and construct a labelled diagram of its structure to show what it can do. 3 a Research when the next eclipse will occur that can be seen from your local area. b Produce an advertisement to get people out to watch the eclipse. Remember to inform them how they can safely view the event without damaging their eyes.
Think
10 Explain how the Sun affects: a rainfall b wind 11 Identify the name of our nearest star and its distance from Earth. 12 If the Earth is drawn as a circle of diameter 1 mm, identify how large the Sun would be on the same diagram if the diagram is to be drawn to scale.
UNIT
8.2
Prac 1 Unit 8.2
[ Practical activity ]
The sunspot cycle
Equipment
Graph paper 2 If the graph follows a similar cycle for the next 11 years, sketch the predicted number of sunspots up to 2009. 3 How many sunspots do you predict for this year? If possible, check your prediction using the Internet.
Method
1 The approximate numbers of sunspots recorded over a 14-year period are given below. Use these data to construct a sunspot line graph. Place the years on the years on the horizontal axis.
Year Sunspots
1989 157
1990 142
1991 146
1992 94
1993 54
1994 30
1995 18
1996 9
1997 22
1998 64
1999 93
2000 120
234
8. 3
The ancient civilisations defined the days, seasons, months and years by following the movements of the Sun and Moon. Babylonians, Mayans, indigenous Australians and many other cultures all developed complex ways to predict seasonal changes. This enabled people to plan when to plant crops or move to a new location in search of seasonal foods. Survival depended on this ancient scientific knowledge of the Earths movement in space.
UNIT
context
Day and night are not usually of equal length, except at the equator. This is caused by the tilt of the Earths axis. The diagram below shows the Earth in a position where the southern hemisphere experiences longer nights than days.
Sun Earth
Point A is about to experience sunrise, while on the other side of the Earth point B is about to experience sunset.
N
equator equal length day and night longer nights
longer days
northern hemisphere
southern hemisphere
S
night 23.5 day
When Earth is in the position shown, days are shorter in the southern hemisphere and longer in the northern hemisphere.
Fig 8.3.3
235
>>>
It is the Earths orbiting of the Sun that causes stars to appear in different positions throughout a year and the length of day and night to change through the year.
Seasons
As the Earth orbits the Sun, the tilt causes different parts of the Earth to experience different heating effectsin other words, different seasons. In summer, the Suns energy is concentrated over a smaller area, and therefore produces a greater heating effect and higher temperatures. In winter, the same amount of energy is spread over a larger area and that area does not heat up as much.
Seasons in the southern hemisphere
Fig 8.3.4
1 year
Sun 1 day
N
Fig 8.3.6
An Earth year is not quite 3651/4 days. So that our calendar has an exact number of days, it is based on 365 days, with an extra day added in February each leap year. Generally, a leap year occurs every four years and is divisible by 4, but years ending in 00 (1900, 2100, 2200, etc.) are not leap years unless they are divisible by 400.
Fig 8.3.5
Different concentrations of light and heat from the Sun produce the seasons.
Sun
same amount of heat/light from Sun heat/light from Sun line of latitude winter (heat/light spread out) spread over large area
236
The Earth may be thought of in terms of two hemispheres, or half spheres. When it is summer in the southern hemisphere (which contains Australia), it is winter in the northern hemisphere. At the summer solstice, days are longest, and at the winter solstice, days are shortest. Between these two times, at the two equinoxes, day and night are of Prac 1 equal length.
p. 238
11 If the Earths axis was not tilted, explain whether there would be: a seasons b day and night 12 If the Earth tilted even more, explain how the seasons would be affected. 13 Describe the difference between an equinox and a solstice. 14 It is hot at the equator all year. Explain why.
UNIT
8.3
Day and night The year
[ Questions ]
Analyse
15 Identify which is longer, day or night, for the area marked A on Earth in Figure 8.3.7.
Checkpoint
1 Clarify what is meant by the Earths axis. 2 State how long it takes the Earth to rotate once on its axis. 3 State how long it takes the Earth to travel once around the Sun. 4 True or false: a A leap year is one that 4 divides into without any remainder. b The year 2000 was a leap year. c The year 2100 will be a leap year.
Sun A
Earth
Seasons
5 Describe the feature of the Earth that is responsible for the seasons. 6 State the angle of the Earths tilt. 7 Clarify the following terms: a hemisphere b line of latitude c solstice d equinox 8 Draw a diagram to demonstrate your understanding of how a season occurs.
Fig 8.3.7 16 Identify which direction the stars appear to move: west to east, or east to west. Hint: Think about the direction of the Earths rotation. 17 Use Figure 8.3.6 to determine when the particular seasons occur in the northern hemisphere compared to the southern hemisphere.
Think
9 Identify the location on Earth where day and night are always the same length. 10 a Identify the location on Earth where it could be dark for more than 24 hours at a time. b Explain why this is possible.
237
UNIT
8 .3
>>>
[ Extension]
Investigate
1 Use newspapers or other sources to record sunrise and sunset times for two weeks. Describe any changes in the length of day and night. 2 Investigate and explain aphelion and perihelion. 3 Research what the five climatic zones on Earth are and produce a poster to display your information, with examples of what these zones commonly are like. 4 Investigate at what speed the Earth: a spins on its axis b moves around the Sun
Creative writing
Not in a spin!
Scientists have just announced that the Earth is about to stop spinning on its axis! What may be the consequences? How will the weather and climate be affected? Will plants grow? Is this the end, or will life be possible in some areas? Write an account of how you prepare, and events afterwards.
Create
5 a Construct a model to demonstrate either the seasons, day and night, or the year. b Present your model to the class to teach them about your chosen concept.
UNIT
8.3
Prac 1 Unit 8.3
[ Practical activity ]
Fig 8.3.8
A model Earth
Aim To model night, day and the seasons Equipment
A sphere (e.g. a ping pong ball or foam ball), a skewer or fine rod, a wedge, a lamp, a piece of string (60 cm)
mark where you live (approximately!) sphere (Earth)
Method
1 Assemble the apparatus as shown in Figure 8.3.8, and place a mark on the Earth model to represent where you live. 2 Rotate the Earth model on its axis to simulate day and night. 3 Keeping the axis at the same angle, move the model around the lamp (the Sun) while a partner keeps it spinning on its axis to simulate day and night. 4 Repeat step 3 as required in order to complete the questions.
lamp (Sun) string
rod
wedge
Questions
1 Explain the purpose of the piece of string. 2 Describe what you notice about the length of day and night as you move around the Sun. 3 Draw and clearly label a diagram to demonstrate your model in four positions representing each season.
238
8. 4
context
The Moon has inspired more stories, myths, prayers and rituals than anything else in history. Look at a full moon and you will see why different cultures see a man, a rabbit or a woman weaving. The name of the goddess Luna was given to the belief that a full moon makes people madlunatics. Easter is also associated with the Moon, as it falls on the first Sunday after the first full moon after 21 March. Maybe the Easter bunny is related to the image some cultures see in the Moon.
UNIT
Astronauts must wear space suits with breathing apparatus on the Moon, as the Moon has no atmosphere and therefore no air to provide oxygen to breathe. Though astronauts have the same mass on the Moon as they do on Earth, their weight (the force of gravity on them) is about one-sixth on the Moon because the Moon is much smaller than the Earth. So lunar astronauts were able to take huge leaps and jump further than on Earth before falling to the surface once more.
The Moon
Fact file
Mythology Mass Diameter Gravity Surface temperature Period of rotation (day) Time to orbit Earth Tilt of axis God of the night 0.012 times that of Earth 3476 km ( = 0.27 x Earths diameter) 0.16 times that on Earth 230C to 123C 27.3 days 29.5 days 5
Fig 8.4.1
Notice that the time for the Moon to orbit the Earth is nearly the same as the time it takes to spin once on its axisthis results in us only ever seeing the one side of the Moon from Earth. The other side is often called the dark side of the Moon since it had never been seen until the Apollo missions.
239
>>>
Phases of the Moon
The Moon takes about a month to orbit the Earth, and spins at a similar rate, and therefore we always see the same face of the Moon. How much of the Moons face we see depends on where it is in its orbit around the Earth. We call these different views phases. There are eight Once in a main phases of the Moon. blue moon To understand Figure 8.4.3, We have all heard the imagine yourself on the Earth, saying once in a blue under point A looking towards moon, which means not very likely. But what Moon A. Because the Sun is is a blue moon? It is directly behind the Moon, the name given to the you see nothing of the Moon second full moon in the same month. Since the (we call this a new moon). time between two full Now imagine yourself on moons is 29.5 days Earth under point C, looking and a month is about 30.5 days, a blue moon directly towards Moon C. is rare, occurring only From here you would see once every two and only half the Moon. a half
years.
Fig 8.4.2
Scientists believe that about 4 billion years ago the Moon was a hot, fluid mass that eventually cooled enough to form a crust. This crust was bombarded by meteorites to create the highland regions. Some of the depressions caused by meteorite impacts were filled with lava from lunar volcanoes that solidified to form large, Prac 1 p. 244 smooth areas or maria. In 1971 and 1972, Apollo missions discovered that the interior of the Moon is still hot. In 1998, the Lunar Prospector found evidence of water in the form of ice mixed with lunar dirt at the Moons poles.
Fig 8.4.3
Look from a letter on Earth to the same letter near the Moon and try to imagine the view from Earth in each case.
Now try the other positions (D to H) and check out how each phase occurs. A summary of the phases is shown in Figure 8.4.4.
Prac 2 p. 244
240
new moon
waxing crescent
first quarter
gibbous
full moon
gibbous
third quarter
waning crescent
Fig 8.4.4
Fig 8.4.6
Earth N
Moon high tide water not as strongly attracted by Moons gravity is left behind, causing another high tide
Fig 8.4.5
Tides
As early as the second century BC, the Chinese had recognised a connection between tides and the Moons cycle. About twice a day the sea level rises to a high tide and falls to a low tidethe average time between two high tides is 12 hours 25 minutes. It was not until Newton proposed a theory of gravity in 1687 that tides were understood to be the result of the Moons gravitational pull on the Earth.
The gravitational force between two objects is only noticeable when one or both objects are very large, as is the case with the Moon and the Earth. The Moon attracts the oceans towards it, enough to cause a bulge in the oceans facing the Moon. If this were the only effect there would only be one high tide and one low tide a day, not two. The Earths rotation, however, causes a similar bulge on the other side of the Earth.
Lunar eclipse
A lunar eclipse occurs when the Moon passes into the shadow of the Earth, as shown in Figure 8.4.7.
A lunar eclipse
Fig 8.4.7
241
UNIT
8. 4
The Moon
Lunar eclipses occur in stages as shown in Figure 8.4.8. Lunar eclipses can occur up to three times a year.
>>>
Stages of a lunar eclipse
Fig 8.4.8
UNIT
8. 4
[ Questions ]
Sun Earth A Moons orbit
Checkpoint
Introducing the Moon
1 Clarify what is meant by celestial. 2 State the year when the first person walked on the Moon, and identify who it was. 3 Identify who the second person was to walk on the Moon. 4 State whether the Moon has: a atmosphere b gravity 5 State how far the Moon is from the Earth, rounded to the nearest 1000 kilometres. 6 Identify who used a telescope to view the Moon in 1609.
A
Think
18 More meteorites reach the surface of the Moon than the surface of the Earth. Propose a reason why. 19 Identify the number of Moons (approximately) it would take to equal the mass of the Earth. A 10 B 100 C 1000 D 10 000 E 1 000 000 20 Explain the difference between a waxing crescent and a waning crescent. 21 Predict how the tides would be affected if the Moon was: a larger b further from the Earth 22 Explain what happens during: a a penumbral lunar eclipse b a partial lunar eclipse 23 Describe what is meant by the dark side of the Moon. 24 There are more extreme temperatures on the Moon than on the Earth. Propose a reason why.
Tides
14 Identify what causes the tides on Earth. 15 State the number of tides that occur per day. 16 Draw a diagram to demonstrate how the tides are created.
Lunar eclipse
17 Describe how a lunar eclipse occurs.
242
25 Describe how the duration of a lunar eclipse would be different if the Earth was smaller. Hint: Look at Figure 8.4.8.
[ Extension]
Investigate
1 Produce a poster of the Moon, showing the names of some major features. 2 Investigate what neap and solar tides are. 3 Obtain a tides chart and produce a key to explain its use.
Analyse
26 Copy Figure 8.4.9, and show where the Earth would be placed if a quarter Moon is to be seen.
Surf
4 Construct a model of the Lunar Prospector that discovered ice on the Moon by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 8, and clicking on the destinations button.
sunlight
Moon
Fig 8.4.9 27 The tidal bulges are missing from Figure 8.4.10. Copy the diagram and include them.
Creative writing
Due to overpopulation on Earth, a settlement is to be established on the Moon. You are a consulting scientist involved in planning and establishing the colony. What requirements will people have on the Moon? Anticipate some of the difficulties of life on the Moon. Consider factors such as food, temperature, oxygen, etc. and the possibility of meteorite strikes. Include a diagram of planned lunar constructions.
Moon
Earth
Fig 8.4.10
243
UNIT
8. 4
The Moon
>>>
[ Practical activities ]
Crater formation
Aim To investigate how craters get their shape
UNIT
8. 4
Prac 1 Unit 8.4
Equipment
Flour, chocolate icing sugar, shallow tray (e.g. foil tray), three rocks about 1 cm to 7 cm, newspaper, metre rule
Aim To construct a flip book to show the main phases of the Moon Method
Method
1 Spread newspaper under the shallow tray. 2 Place a fairly thick layer of flour in the tray, and smooth it into the tray. 3 Cover this with a thin layer of chocolate icing sugar to represent an outer layer of rock. 4 Drop the rocks onto the flour from a height of 1 metre. Remove them after each drop. 5 Increase the height to two metres and repeat. 6 Record the diameter of each crater and its shape for the three rocks. CAUTION: Do not dispose of the flour down the sink (your teacher will advise you of the correct method of disposal).
1 Record the phases of the Moon every third night for one month, using multiple copies of a record box like the one in Figure 8.4.12.
Date
____________________
Time ____________________
Fig 8.4.11
Fig 8.4.12
2 If the sky is cloudy, guess what the Moon may look like. 3 Paste the diagrams onto stiff cardboard. 4 Place them in order from a new moon and secure to make a small booklet. 5 Flip the pages with your thumb to see the Moons phases.
flour
Questions
1 Make a list of the factors that affected the type of crater formed. 2 Did the same rock make the same size crater every time? Explain. 3 The experiment assumes that all objects hit planets or moons vertically. Design an experiment to see the effect of an impact at an angle.
244
Chapter review
[ Summary questions ]
1 Give scientific definitions of the terms day and year. 2 Identify the term used when day and night are of equal length. 3 Identify the word starting with L that is used to describe aspects of the Moon. 4 State how long it takes the Moon to orbit the Earth. 5 Describe gravity on the Moon. 6 Draw the eight main phases of the Moon. 7 Explain three examples of our dependence on the Sun. 8 Copy and complete: Nuclear _____ reactions occur in the core of the Sun. 9 Why do sunspots appear dark when they are obviously very hot? Explain. 10 List the planets in order, starting with the one closest to the Sun. 11 Describe one aspect or fact about each planet. 12 Identify two space probes and state which planet(s) they explored. 13 Identify the planet that has an orbit which overlaps that of another. 22 Explain the following phenomena. Include a description of what each phenomenon is and what its cause and effect are. Give examples where appropriate. a tides b seasons c day/night d year e lunar eclipse f solar wind 23 Describe how many cultures depend on the Sun and Moon for survival.
[ Interpreting questions ]
24 Use the fact files in this chapter to answer the following questions. a Identify the planets with more than 15 moons. b List the terrestrial planets. c Identify the planets that have methane in their atmosphere. d Identify the planet that is most similar to Earth and explain your reasons for choosing this planet. e State how long a day and a year are on Pluto. f Identify the planet that looks red and explain why this is the case. 25 Construct a table that shows the distance from the Sun, the day length and the year length for each planet. 26 a List the things that make it possible for us to survive on Earth. b Could any other planets in the solar system support life? Explain why. c Which planet would be easiest to move to if we had to leave the Earth? Explain why. d Of the nine planets and the Sun, evaluate which is the most important body in the solar system. Give reasons for your decision.
Worksheet 8.4 Earth and space crossword Worksheet 8.5 Earth and space revision Worksheet 8.6 Sci-words
[ Thinking questions ]
14 Explain the differences between a prominence and a solar flare. 15 Use a diagram to describe what causes an aurora. 16 Draw a diagram to demonstrate an annular eclipse. 17 State whether the year 2500 is a leap year. 18 The geocentric model was accepted before the heliocentric model. Compare these two models of the solar system. 19 Classify the following as supporters or opponents of the heliocentric solar system model: Aristotle, Copernicus, Ptolemy, Brahe, Kepler. 20 Explain why scientists did not speak up in favour of the heliocentric model for a long time when they knew it to be a better model than the geocentric model. 21 Identify the astronomer who first used a telescope to find errors in the geocentric model.
245
>>>
By the end of this chapter you should be able to: identify and describe the different layers of the Earth and its atmosphere describe where sedimentary, igneous and metamorphic rocks come from identify different rocks and the minerals that make them up describe how rocks are broken down and moved about, and how this affects the shape of the land identify gases found in the atmosphere and describe their importance to life on Earth describe the importance of ozone and greenhouse gases to life on Earth describe the effect of the Sun on the atmosphere, weather and the water cycle identify some specialised careers for scientists.
2 What causes volcanoes and earthquakes? 3 Is it possible for rocks to be made out of dead
animals?
9.1
context
In 1872 Jules Verne wrote a best-selling novel called A Journey to the Centre of the Earth, in which dinosaurs fought to the death deep inside a hollow Earth. Today geologists are still trying to finding out what actually goes on inside our Earth. Geologists ask us to imagine the Earth as a cracked hard-boiled egg. The thin, cracked shell is the crust and is divided into plates; within the shell is the mantle made of firm but slippery egg white, and the solid yolk is the core. As you move the pieces of shell around, some mantle is exposed. The same thing happens on Earth but this movement causes mountains, earthquakes and volcanoes.
The crust
The crust is the layer of Earth on which we live. It contains the land and seas. If we were to dig down into the crust the first thing we would come across is a thin layer of soil and sand. This is followed by a layer composed mostly of solid rock. Just like the shell of an egg, it is brittle and can easily break. On Earth there are 12 major pieces or plates. The crust is thickest under the continents (about 70 km thick) and thinnest under the sea (about 11 km thick). The crust is extremely thin when compared to the diameter of the Earthlike a postage stamp stuck on a basketball. The temperature of the crust increases from an average of 20C at the Earths surface, Prac 1 to about 500C at its maximum depth.
p. 250
Fig 9.1.1
Lithosphere p (crust and upper mantle)
The mantle
Mantle 2900 km
Solid
Inner core
Core
5100 km
6378 km
On further digging we enter the mantle. It is about 2900 km thick, with temperatures of 500C near the crust and 3000C nearer the core. The mantle is unusual in that the upper mantle is solid, very much like the crust. The upper mantle and crust form a rigid layer of rock called the lithosphere (from lithos, Greek for stone). Geologists believe that below the lithosphere is a narrow layer of semi-molten rock called the asthenosphere (from asthenes, Greek for weak). Below this is the lower mantle, which is solid due to the extreme pressure from the material above.
The core
At the centre of the Earth is the core. The core is actually made up of two parts, a 2200 km thick liquid outer core and a 1280 km thick solid inner core.
247
UNIT
UNIT
9.1
Our Earth
The outer core is made of continually moving molten (molten means melted) metal (iron and nickel). This metal gives the Earth its north and south poles and its magnetic field. This field acts as a cosmic shield for the Earth, protecting us by deflecting large doses of cosmic rays from the Sun. The temperature of the outer core varies from 4000 to 6000C. The remaining 1280 km of our journey is through the inner core, where temperatures range from 4000C to 7000C. At these temperatures the iron and nickel that make up the inner core should be molten, but the extremely high pressures from the layers above keep these metals solid.
Worksheet 9.1 Cut-away Earth
>>>
along with it: the plates are continually moving. The plates A changing Earth move until they eventually crash A map of the world of into one another, break away the distant future would look very different to from each other or slip along or that of today. Because under each other. This is the the continents are on source of much volcanic activity shifting plates, they are travelling slowly across and earthquakes. the surface of the Earth. This sliding is not smooth: Australia is drifting north rocks stick and jam. Pressure at about 5 cm per year! The Mediterranean Sea builds until the rocks can take is slowly being squeezed no more. There is a sudden shut, the Atlantic Ocean explosive slippage and an is getting wider and the earthquake happens, its damage Himalayan mountains are getting higher! being the most severe at the edges of the plate. Shifting plates also suggest that the continents must be slowly moving too. When a German meteorologist, Alfred Wegener, suggested in 1912 that continents could shift, the idea sounded so ridiculous that it was hardly believed at first. There are clues, however, that the continents were once stuck together as super-continents and that they have slowly shifted
Earths plates move in different directions as they split, bang and scrape together.
Crashing plates
The surface of the Earth looks as if it could never move, but bits of it are actually moving all the time. The lithosphere is broken into huge slabs of rock called plates. These plates float on the semi-molten rock of the asthenosphere. Currents (called convection currents) in the asthenosphere slowly move the semi-molten rock and also carry the plates
Fig 9.1.2
Eurasian plate
African plate
IndianAustralian plate
N W S E
Nazca plate
248
to their current positions. These clues include the shapes of the continents and the types of rocks and plant life found on them. The idea that the Earths lithosphere is made up of shifting plates was first introduced in 1969 and is called the theory of plate tectonics.
e the outer and inner core f the outer and inner mantle g the lithosphere and asthenosphere
Crashing plates
6 Copy and complete: The ____________ is broken into huge slabs of rock called __________. These ___________ float on the continually moving molten rock of the _______________. 7 Identify two events that are caused by the plates of the Earth crashing into each other or moving apart. 8 Describe how an earthquake may be caused.
Think
9 List the types of places where a geologist may work. 10 Describe two tasks that a geologist would do as part of their work. 11 If you were to be good geologist, describe what skills you would need to have. 12 Explain why a geologist would need to check the land and rock that a skyscraper is to be built on. 13 Copy the following and modify any incorrect statements so they become true. a The inner core of the Earth is solid. b The iron and nickel in the crust gives the Earth its magnetic field. c The crust is very thick compared to the total volume of the Earth. d Mines are often deep enough to go into the mantle. 14 Describe how life on Earth would be affected if there was no magnetic field. 15 Scientists want to explore the Earths structure by digging a hole through the crust into the mantle. List the advantages and disadvantages of choosing central Australia for the dig.
Fig 9.1.3
The edge of a tectonic plate: the San Andreas fault causes up to five tremors a day through California.
UNIT
9 .1
[ Questions ]
Checkpoint
Journey to the centre of the Earth
1 Clarify what is meant by the crust of the Earth. 2 Identify where the crust is: a thickest b thinnest 3 List the layers of the Earth from inside to out. 4 Identify which of the layers of the Earth is: a the thickest b the hottest c mainly made of iron and nickel d liquid e solid 5 Draw a cut-open diagram of planet Earth and label: a the poles b the equator c the direction it spins d the crust
Skills
16 Use the information in the table to plot a line graph showing the temperature for every kilometre as we dig into the crust.
0 20
2 87
4 153
6 220
8 286
17 Use your graph from question 16 to estimate the temperature at the following depths: a 1 km c 10 km b 5 km d 20 km
>> 249
UNIT
9.1
Our Earth
>>>
3 a Research and write a short report on how the journeys of these sailors assisted us in thinking the Earth was spherical: i Christopher Columbus in 1492 ii Magellan and his ship Victoria in 1519 b Compare what they found to the work done by Eratosthenes of Cyrene in about 250 BC. 4 Australia is drifting northwards at 5 cm per year. This means that Sydney will eventually be where Newcastle is now! Calculate how long this will take if the distance between Newcastle and Sydney is 100 km.
18 Use the graph to roughly determine the depth at the following temperatures: a 50C c 200C b 100C d 300C 19 Use an atlas to find the spot on Earth where you would expect the crust to be: a thickest b thinnest c thinnest while you are still standing on land. Explain why you chose these three sites.
[ Extension]
Investigate
1 Imagine digging a hole from where you live straight through Earth to the other side. Use a globe to predict where the tunnel would emerge. 2 Investigate the seven continents of the world and identify the highest mountain on each.
Creative writing
Its hot down here!
You have invented a machine that will dig 100 km into the centre of the Earth every day. The journey will take a little over two and a half days. Write a series of four diary entries for the time of day that you enter a new layer of the Earth. Calculate how long it will take to get through each layer and describe the conditions found in each.
UNIT
9 .1
Prac 1 Unit 9.1
[ Practical activity ]
The crust is like an eggshell
Aim To observe first-hand a model of the Earths plates Equipment
Fresh hard-boiled egg
Method
1 Tap the egg firmly so that the shell cracks, but do not peel off the shell. 2 Squeeze the egg gently but not enough to destroy the egg. 3 Try to slide one piece over another. Fig 9.1.4
The cracks are in the eggs shell only.
Questions
1 Describe what happens to the cracks in the shell. 2 Record your observations. 3 Explain how this cracked egg is similar to the Earth. 4 If an ant was standing on one of the cracks while you were performing the experiment, describe what it would experience.
250
9. 2
context
Rocks may not be alive, but they can still tell us quite a lot. Geology is the study of the Earth, including its rocks and minerals. Though we are familiar with the words rock and mineral, not many of us can give a good definition of what each word really means. First we will ask Clare, a mineralogist, to explain what minerals are. We will then ask Peter, a petrologist, to explain rocks and their formation.
UNIT
Minerals
Clare describes minerals as the building blocks of all rocks. Clares work as a mineralogist involves working with mining companies to find better ways to get the minerals out of rocks. Minerals are natural substances in which the particles are arranged in patterns. Minerals often occur in beautiful shapes called crystals. Metals, gems and industrial materials of many kinds are made from minerals. Examples of minerals are quartz, mica and feldspar as seen in Figure 9.2.1. Ninety-nine per cent of all minerals are made up of only eight elementsoxygen, silicon, aluminium, iron, calcium, sodium, potassium and magnesium. Since the two most common elements that make up the Earth are oxygen and silicon, it is not
surprising that these are also common in minerals. Quartz is made up of silicon and oxygen. Some minerals are made up of only one metal element such as gold, silver or platinum, and are called native metals.
Fig 9.2.2
Native silver
Piezoelectricity
When two brothers, Pierre and Jacques Curie, sandwiched a thin slice of quartz between two layers of tin and applied pressure to it in 1880, they detected a short pulse of electricity. Many years later, scientists realised that this so-called piezoelectricity could be generated using tiny quartz crystals, and could be used to keep time in watches and clocks.
Fig 9.2.1
Quartz (left), mica (middle) and feldspar (right) are all minerals.
251
>>>
produce a streak, while other powdered minerals have a different-coloured streak than the mineral itself.
Colour of streak
Red White Yellow (or brown) Black
Fig 9.2.3
Different colours in minerals are caused by the different chemicals in them. The red colour of haematite, for example, is caused by lots of iron oxide (more commonly known as rust). These ochres are often mixed to make other colours.
Aboriginal rock painting using powered ochre supplied by nature
Fig 9.2.4
Although a mineral may have a distinctive colour, this is not a reliable enough property to identify the mineral. A better method is to crush the mineral into a powder. The colour of a powdered mineral is called its streak and can often be seen by rubbing a mineral on an unglazed white tile. Some minerals do not
252
Charcoal, for example, is commonly mixed with kaolin to make grey. The powders are also mixed with egg, juice or blood to make a paste that can then be painted onto rocks or the body.
Uses
Food preservative, source of sodium and chlorine Lead in pencils, electric motors Matches, fertilisers Light bulb filaments, saw blades and drill bits Used to make sulfuric acid, fertiliser
Crystals
Many minerals have a distinctive crystal structure. The word crystal comes from the Greek word kyros, meaning icy cold. In ancient times it was believed that quartz crystals were composed of water that had frozen so solid that it could never melt. Because each mineral has a different crystal structure and colour, they reflect light differently. Lustre is a term that refers to the way a mineral reflects light.
Rocks
Petrology is the study of rocks. Prac 1 Prac 2 As a petrologist employed by a p. 255 p. 255 mining company, Peter collects rock samples, looking at their properties and working out which minerals they contain. This information is used in designing mines. Peter describes rocks as follows: Rocks are made up of minerals. Granite is a rock made from three mineralsquartz, mica and feldsparwhereas limestone contains just one mineralcalcium carbonate. You may be surprised to learn that clay and sand are types of rock.
Fig 9.2.5
Some crystals have an internal structure that causes them to break apart more easily in particular directions. These are called cleavage planes.
Several cleavage planes can be seen in these crystals.
Fig 9.2.6
Fig 9.2.7
Ores
Part of Peters job is to study the minerals in rocks and work out whether it is worthwhile getting them out. Ores are rocks or minerals that contain elements that can be profitably extracted. For example, iron is extracted from an ore called haematite, and aluminium from the ore bauxite.
253
UNIT
9. 2
>>>
Fig 9.2.8
Some other examples of ores are listed in the table below. Australia has large mines for extracting aluminium, iron, uranium and many other elements from rocks.
Ore
Azurite Bauxite Carnotite Cassiterite Chalcopyrite Galena
UNIT
9.2
Minerals
Haematite
[ Questions ]
18 Explain how an ochre is prepared before being used for painting. 19 The following statements are incorrect. Modify each so it becomes true. a A mineral is any substance found in the ground. b The two most common elements that make up the Earth are oxygen and aluminium. c Gold and silver are metals, not minerals. d Mineralogy is the study of minerals. 20 Silicates are types of minerals containing silicon and oxygen. Explain why silicates are very common. 21 True or false? a Clay is a type of rock. b A rock may contain only one type of mineral. c Ore is a type of mineral.
Checkpoint
1 Describe what a geologist does. 2 Clarify what minerals are. 3 List four examples of minerals 4 List four characteristics of minerals. 5 a Explain what Mohs hardness scale is used for. b Frederick Mohs was a scientist. Identify what type of scientist he was.
Rocks
6 Describe what a petrologist does. 7 Clarify the term rock. 8 Identify three examples of rocks.
Ores
9 Is an ore a rock, a mineral or could it be either? 10 Clarify the term ore. 11 Identify the ore that contains: a iron b aluminium 12 Identify two ore types that contain the same element. Name the element.
Analyse
22 a Construct a line representing Mohs scale of hardness. b Predict where each of the following would go on the line and mark them on it. i fingernail ii copper iii iron nail 23 List the following minerals in order from softest to hardest. apatite, calcite, talc, quartz, diamond 24 Predict whether: a orthoclase would scratch gypsum b quartz would scratch topaz c calcite would scratch your fingernail d diamond would scratch glass 25 Gneiss contains feldspar, quartz, mica and hornblende. Identify which of these: a are minerals b is a rock
Think
13 Explain the difference between geology and petrology. 14 Explain how a native mineral is different from most other minerals. 15 Identify how ancient or current-day people use pigments from minerals. 16 Describe what ochre is, and who uses it. 17 Identify three ochres and their colour.
254
[ Extension ]
Investigate
1 Investigate the types of gemstones, their characteristics and where they are found. 2 The term carats is used to describe diamonds and other gems. Investigate exactly what a carat is, and find out how diamonds are classified in terms of colour and quality. Produce an information card for people to use when selecting diamonds for jewellery. 3 Research the location of Australias major known mineral deposits. Draw a poster-sized map showing the location of these. Include pictures of different minerals, ores and mines in Australia. 4 Present information in a chart showing how an ore is processed to produce a pure metal.
Surf
5 Learn more about the uses of minerals in Australia, by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 9, and clicking on the destinations button.
UNIT
9.2
Prac 1 Unit 9.2
[ Practical activities ]
Fig 9.2.9
Making a crystal
Aim To grow a crystal and observe its structure Equipment
Copper sulfate, 250 mL beaker, icy pole stick, petri dish, Bunsen burner, tripod, gauze mat, heat-proof mat
seed crystal icy pole stick
Method
PART A Obtaining a seed crystal 1 One-third fill a 250 mL beaker with water and dissolve as much copper sulfate in it as possible. 2 Heat the solution and add more copper sulfate in small amounts until no more will dissolve. 3 Remove the solution from heat and allow it to settle and cool for about 5 to 10 minutes. 4 Carefully decant some of the solution into a shallow layer in a petri dish and allow this to cool overnight. Keep the rest of the solution in the beaker. PART B Growing a large crystal 1 Obtain a small seed crystal from the petri dish (or ask another group for one if yours did not produce any). 2 Tie it to a length of cotton thread and suspend it in your cooled copper sulfate solution. 3 Observe the crystal every few days for a week or so. 2 Sketch the fully grown crystal. 3 Identify whether copper sulfate crystals have obvious cleavage planes.
copper sulfate solution
Observing rocks
Prac 2 Unit 9.2
Method
Questions
1 Your initial solution was saturated. Explain what this means.
Construct a table of results and comment on as many of the following characteristics as you can for the rock samples: colour, streak, lustre, crystal structure, hardness, density.
255
UNIT
9.2
9. 3
When you pick up a rock, have you noticed that some are different than others? There are so many different rocks that geologists have found it hard to classify them. To make identification of rocks easier, geologists classify rocks according to how they were formed. This results in three main types of rocks: igneous, sedimentary and metamorphic.
UNIT
>>>
context
Igneous rocks
Igneous rocks are formed when molten material from within the Earth cools and becomes solid. Igneous comes from the Latin word ignis, meaning fire. Molten material is called magma when it is below the Earths surface, and lava when it is above the Earths surface. Magma reaches the Earths surface when volcanoes erupt. When magma cools slowly below the Earths surface, intrusive igneous rocks containing large interlocking crystals are formed. Intrusive means forced in, and is a good description of underground igneous rocks that have squeezed between other rock layers.
Lava solidifying to form extrusive igneous rock
Fig 9.3.2
Fig 9.3.1
Granite is an example of a slow-cooling igneous rock in which crystals are easy to see. Because it is above the Earths surface, lava cools more quickly than underground magma and the crystals formed are smaller or nonexistent. This results in extrusive igneous rocks. Extrusive means pushed out. Basalt is an example of an extrusive igneous rock containing tiny crystals and is the main rock forming the ocean Prac 1 crust. p. 263
256
Sedimentary rocks
Sedimentary rocks derive their name from the Latin words sedimentum, meaning settling, and sedere, meaning to sit down. They are made from sedimentsmall, broken-down bits of other rocks, or animal or plant remains. This material has been compressed and stuck together in a process known as lithification. There are two main stages in lithification. First, sediment builds up in a layer (for example, at the bottom of a river bed or the sea). The pressure of material above it squeezes the sediment at the bottom of the layer. This pressure reduces the air gaps and the particles interlock. Second, water seeping through the compressed sediment carries with it minerals which cement the sediment particles together even more strongly.
Uses of basalt
Bridges Buildings Crushed and placed under railway sleepers Crushed and covered with tar to make bitumen roads
Ancient tools
Aboriginals had a great knowledge of the rocks in Australia. This was important in the making of tools, weapons and ochres. Different rocks were identified for different purposes depending on their hardness, ability to flake and form sharp edges, ability to be ground or worn, and their colours. Very hard igneous rocks were suitable for making tools such as axe heads. At Mount William in Victoria, volcanic greenstone was mined for axes. It had the hardness, toughness and fine grain needed to make heavy-duty axes with a sharpened edge. Greenstone from such quarries was traded with many other tribes around Australia. Axes made from igneous rocks have also been found in ancient Aboriginal quarries near volcanic outcrops in Kakadu National Park, Northern Territory. These axes have been dated using scientific methods and found to be over 20 000 years old!
An Aboriginal axe-head made from an igneous rock
Sedimentary rock
Sandstone Mudstone Conglomerate Limestone Chalk Coal
Made from
Sand Mud Particles of different sizes Remains of sea organisms (e.g. fish, corals) Skeletons of tiny sea animals Compressed plant material
Fig 9.3.3
Sandstone
Fig 9.3.4
257
UNIT
9.3
Types of rocks
>>>
Fig 9.3.8
These stalactites are chemical sedimentary rocks.
The white cliffs of Dover in England are made of powdery chalk composed of the tiny skeletons of sea creatures over 70 million years old.
The white cliffs of Dover, England
Fig 9.3.6
Sedimentary rocks are easy to split because of their layered structure. Sandstone comes in a variety of colours, and blocks of it are used to make bridges and buildings. Limestone may be ground to make cement, which in turn is a key ingredient in concrete, one of the most important building materials of all. Coal is burnt to provide power for electricity generation and heating.
Fig 9.3.7
These fascinating natural structures are formed when slightly acidic rainwater dissolves calcium carbonate (lime) out of sedimentary rock. This lime solution may then drip from the roof of a limestone cave, leaving deposits on the ceiling (stalactites) and floor (stalagmites) when the water evaporates.
Prac 2 p. 263
Tourist-attracting rocks
Kata Tjuta (the Olgas) are a group of thirty or so huge rocks in Central Australia that are the weathered remains of sedimentary rocks. They consist of both sandstone and conglomerate rock. The largest of these rocks reaches 546 metres above the surrounding ground level.
Oyster mortar
The first white settlers of Sydney had no limestone from which to grind lime for mortar used in bricklaying. Instead they collected oysters, which were in abundance around Sydney harbour, and burned and crushed them to produce the lime needed.
258
Career profile
Palaeontologist
A palaeontologist examines, classifies and describes animal and plant fossils found in sedimentary rocks. This helps us understand the history of life on Earth, which is particularly important in oil exploration.
Sedimentary, igneous or even metamorphic rocks may be changed by heat, pressure or a combination of both within the Earth. A rock made this way is stronger than the original material, because its particles are fused together. This is similar to the process of squeezing a snowball to make it stronger.
Original rock
Limestone Granite Shale Slate Schist
Changed by
Heat Heat, pressure Pressure Heat, pressure Heat, pressure
Metamorphic rock
Marble Gneiss Slate Schist Gneiss
Fig 9.3.9
Palaeontologists can be involved in: locating sites where fossils may be found carefully digging fossils out of the rocks in which they are found preparing fossils for display or storage dating fossils to work out their age using information about fossils to study other things such as oil exploration or the history of life on the Earth. A good palaeontologist will: be able to work safely as a team member or alone be able to work very carefully and patiently as it can take years to remove fossils from rocks have a good eye for detail love fossils.
Fig 9.3.10
Gneiss (pronounced nice) is a metamorphic rock that frequently contains bands of different minerals. Bends in the bands indicate where enormous pressure has folded the rock.
Metamorphic rocks
Pressure cooker conditions deep in the Earths crust can change rocks into new types of rocks. The word metamorphic comes from the Greek words meta (meaning change) and morphe (meaning form), so a metamorphic rock is one that has changed form.
Marble is a popular material for kitchen benchtops and ornaments because of its beautiful patterns and dense composition. The Taj Mahal in India is made of the metamorphic rock marble inlaid with gemstones. Slate is used for roofing tiles, floor tiles and billiard tabletops.
259
UNIT
9.3
Types of rocks
>>>
Simplified rock cycle
Fig 9.3.13
Igneous rocks
Heat Pressure
g Coolin
Meltin
Weathering Erosion
Magma
Melting Sediments
Fig 9.3.11
The Taj Mahal in India is made of white marble and was built by the emperor Shah Jahan as a tomb for his wife, Mumtaz.
Compaction and cementing
Sedimentary rocks
ocean crust
mantle sediments build up and compact to form layers of sedimentary rock continental crust igneous rocks formed from molten rock heat and/or pressure form new, metamorphic rocks sediments pulled deeper by movement of tectonic plates
260
Career profile
Geologist
Geologists study the composition and structure of the Earth. This allows them to locate materials and minerals. Geologists work in laboratories and in the field, usually as part of a team. Fieldwork can involve spending time in remote deserts, or in tropical or Antarctic areas. Geologists can be involved in: advising on suitable locations for tunnels and bridges examining rock samples using electron microscopes studying the nature and effects of natural events like weathering, erosion, earthquakes and volcanoes taking rock samples for analysis finding the age of rocks and fossils. A good geologist will be able to: work as a team member or alone keep accurate records and prepare reports work safely in a number of different environments.
Fig 9.3.14
UNIT
9.3
Igneous rock
[ Questions ]
10 Marble is sometimes used to make food-cutting boards. Propose a reason why marble is used for this purpose.
Checkpoint
1 Clarify the meaning of the Latin word ignis. 2 Compare the following terms: a magma and lava b intrusive and extrusive rocks c a dyke and a sill 3 The rate of cooling of molten rock affects crystal formation. Explain how this occurs and identify whether fast or slow cooling forms the biggest crystals. 4 Identify two types of igneous rocks. 5 Describe a use for a particular igneous rock.
Rock cycle
11 Copy and complete Figure 9.3.15, which is a schematic diagram summarising the rock cycle.
>>
Fig 9.3.15
igneous rocks
me ltin g co oli ng
er o
Sedimentary rocks
6 Identify two types of sedimentary rocks and describe what they are made from. 7 The particles in a sedimentary rock have to stick together. Explain two ways in which this can occur.
heat/pressure
melting
Metamorphic rocks
io
8 Identify two things that may affect rocks in the Earths crust. 9 Identify two types of metamorphic rocks, and name their parent rocks.
ng
ero
he
at/
pr
ss
ur
261
UNIT
9.3
sio
n
me
lti
Types of rocks
>>>
[ Extension ]
Investigate
1 a Investigate Uluru (formerly known as Ayers Rock) to find out the type of rock it is made of. b Draw a diagram to demonstrate how Uluru was formed. c Describe the cultural history of Uluru and its mythology to the Australian Aboriginals. d Discuss with your teacher how to present your findings. 2 Investigate in more detail how coal is formed, and explain the difference (besides colour) between brown and black coal. Present your information as a poster including the key stages in coal mining. 3 Investigate the properties of artificial sedimentary rocks made from various combinations of sand, dry clay, small stones, plaster mix and water.
Think
12 Copy and complete: Rocks are classified according to 13 Granite is formed underground, yet granite boulders are often seen above ground in many areas of Australia. Explain how this could happen. 14 State the age of some ancient Aboriginal axes found in Kakadu National Park. 15 Draw a sketch explaining the difference between a stalactite and a stalagmite. 16 Stalactites and stalagmites often occur in pairs. Propose a reason why you think this may occur. 17 Clarify the meaning of these terms: a sediment b lithification 18 Although coal is made from plant material, a lump of coal burns much longer than a similar-sized piece of dry plant. Explain why. 19 Write a one-sentence summary of each of the three main rock types.
DYO
Analyse
20 Classify the following types of rocks from their descriptions and attempt to name each rock. a Commonly known as bluestone, this rock has small crystals and is found where volcanoes used to be in New South Wales. b Used for tiling floors, this rock easily breaks into layers. c This rock is white and made up of the remains of millions of sea creatures. d Formed inside the Earth by heat and pressure, this rock has layers of minerals that are visible. e This rock forms where muddy rivers flow into lakes. f This rock has large, easily seen crystals and forms inside volcanoes. g This rock was mined by Aboriginal people and used for axe heads.
Create
4 Imagine you are a piece of magma in a volcano. Write and draw a picture storybook that shows what happens to you as you erupt from the Earth and form a rock. Follow your life through the rock cycle as you become different types of rock.
Surf
5 View animations of how the main types of rock are created, and learn more about the rock cycle by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 9, and clicking on the destinations button.
262
UNIT
9.3
Prac 1 Unit 9.3
[ Practical activities ]
Crystals and cooling rates
Aim To observe the effect of cooling rates on crystal size
Prac 2 Unit 9.3
Concrete evidence
Concrete is made from a combination of two or more of the following: cement, sand, crushed rock, water.
Equipment
Copper sulfate, two 100 mL beakers, two 500 mL beakers, one 250 mL beaker, stirring rod, Bunsen burner, tripod, gauze mat, heat-proof mat, safety glasses
Method
1 One-quarter fill the 250 mL beaker with cold water, and dissolve as much copper sulfate in it as possible. 2 Heat the solution and add more copper sulfate in small amounts until no more will dissolve. You now have a saturated copper sulfate solution. 3 Carefully place half of the solution in each of the 100 mL beakers. 4 Place one 100 mL beaker in a 500 mL beaker with some cold water as shown in Figure 9.3.16. 5 Place the other 100 mL beaker in an empty 500 mL beaker. 6 Allow each to stand overnight and pour off any excess solution from the 100 mL beakers. 7 Observe any crystals formed. Fig 9.3.16
Method
1 In one cup, place 3 teaspoons of sand and 3 teaspoons of cement. Label this cup 3S, 3C. 2 In another cup, place 4 teaspoons of sand and 2 teaspoons of cement. Label this cup 4S, 2C. 3 In another cup, place 2 teaspoons of sand and 4 teaspoons of cement. Label this cup 2S, 4C. 4 In another cup, place 3 teaspoons of finely crushed rock, 2 teaspoons of sand and 1 teaspoon of cement. Label this cup 3R, 2S, 1C. 5 Now gradually add a small amount of water to the first cup and mix until you get a thick, even paste. Repeat for the other cups. 6 Leave each cup to dry overnight. 7 Devise a test for the strength of each concrete sample.
Questions
DYO
1 Explain why it was important to have the same total amount of ingredients in each case. 2 Identify which sample was strongest. 3 Identify whether you think concrete setting is a physical or chemical change. Explain why.
cold water saturated copper sulfate solution air only
Questions
1 Describe and sketch any crystals formed in the small beakers. 2 Compare the contents of the beakers to see if there are any key differences between them. If so, describe them. 3 Explain what caused larger crystals to form.
263
UNIT
9.3
9. 4
Have you ever wondered where soil, sand, pebbles and boulders came from? When you look very closely at them you will see that they are simply rocks that have been broken down into smaller particles. This natural process is caused by wind, water, temperature and other factors. Humans can also speed up this change through their actions, some of which can have negative effects on the environment.
UNIT
>>>
context
Break it down
The process of breaking down rocks into smaller pieces is called weathering. Once weathered, any material that is loose can be moved away by the wind, water from rain, creeks and rivers and the ice of glaciers. This movement is called erosion. The material that is washed away is called sediment and is the first step in making sedimentary rocks. Rocks seem tough but can be broken down in a variety of ways. Physical weathering (sometimes called mechanical weathering) is when rocks break into smaller pieces. Waves crashing on rocky shores break down our coasts. Dramatic changes in temperature break rock into small flakes: water expands when it freezes and can split rocks in two if it freezes in cracks on frosty nights. The small particles of soil and sand that are carried away by wind and water have an abrasive action that can act like sandpaper on other rocks that they scrape across. Farming and drought loosens the soil and can speed up erosion by the wind, as Figure 9.4.1 shows.
Worksheet 9.3 The soil texture triangle
Prac 1 p. 268
Fig 9.4.1
Extreme erosion: wind dumped 140 000 tonnes of soil from farmland on Melbourne in 1983.
Some rocks are actually changed into new substances by chemical reactions with water or the gases of the air. This is called chemical weathering. Burning fossil fuels and other industrial activity adds harmful pollutants to the air. Some of these
pollutants are acidic and can dissolve in rainwater to form acid rain. Acid rain is a product of pollution that can speed up the process of chemical weathering. It can also have many effects on the environment, including: dissolving statues and buildings made of certain rocks such as marble killing fish and animals in rivers and lakes killing forests, leading to erosion making soils too acidic for plants and Prac 2 crops to grow. p. 268 Other weathering can be caused by animals scratching and breaking apart rocks with their tracks, as they look for food and when they build burrows. Seeds can settle and grow in small cracks in rocks, and tree roots can search out cracks for a better grip. As these plants grow so do their roots, forcing the crack wider until eventually the rock splits. Any weathering due to living things is called biological weathering.
264
Gases dissolve in water vapour and form sulfuric acid Wet deposition (acid rain) can cause die-back of new growth, leaf fall, and root damage to trees and crops. It increases soil acidity and releases poisonous chemicals into soils, lakes and rivers lakes acidified
Smoke and fumes from power stations and factories Sulfur dioxide (SO2)
Dry deposition smoke and soot blacken buildings. Sulfur dioxide corrodes metal and stone and damages plants
Fig 9.4.2
Sulfur dioxide in pollution causes acid rain, which will increase chemical weathering. Industrial pollution adds harmful chemicals to the atmosphere.
Fig 9.4.3
265
UNIT
9. 4
>>>
Career profile
Environmental scientist
Science has had a large impact on our society and especially on the environment. Environmental scientists have the important job of measuring, recording and finding methods to control the harmful effects of human activity on our environment. Environmental scientists can be involved in: investigating the effects of chemical spills and accidents on the environment assisting farmers, industry and others in methods to reduce their negative effect on the environment testing pollution in water, soil and air assessing the environmental impact of new housing estates and industrial developments upholding anti-pollution laws. A good environmental scientist will be able to: work as part of a large team communicate by writing clear, accurate reports apply the scientific method to an investigation be passionate about environmental issues.
Fig 9.4.4
266
UNIT
9. 4
Break it down
[ Questions ]
16 Identify which parts of a statue are most likely to be weathered and explain why. 17 Chemical weathering is more likely in the city than the country. Explain why. 18 In your own words, summarise what an environmental scientist does. 19 Construct an argument as to why you think humans have or have not sped up erosion and weathering.
Checkpoint
1 Clarify the meanings of the following terms: a soil b decomposition c weathering d sediment 2 Explain the difference between erosion and weathering. 3 Describe what happens to water when it freezes. 4 Identify three causes of: a mechanical weathering b biological weathering 5 Identify three different ways in which rocks are weathered. 6 Identify four ways in which weathered material can be moved.
Create
20 The Environment Protection Authority (EPA) has responsibility for protecting the environment. An environmental scientist employed by the EPA gets up and watches a morning news report that there has been an oil spill in Sydney Harbour. Write a diary for their day, starting from when they hear the news.
[ Extension ]
Investigate
1 a Investigate ways of minimising erosion in one of the following situations: in rivers on beaches on farms around building or road construction sites b Use this information to go out and find examples of these methods. Take some photographs of them. c Produce a poster with your photos to show how these methods work. 2 Describe what these geographical features are and how they form. a river deltas b sandbanks and sandbars in rivers 3 Produce a crossword about weathering and erosion.
Think
13 Compare the similarities and differences between sand and boulders. 14 It is dangerous to leave a filled glass bottle in the freezer. Explain why. 15 Many ancient statues in cities have changed shape in the past 50 years. Propose a reason why.
267
UNIT
9. 4
>>>
UNIT
9. 4
Prac 1 Unit 9.4
[ Practical activities ]
Youre cracking me up!
Aim To investigate the effect of changing temperature on rocks Equipment
Large tin, Bunsen burner, bench mat and matches, safety glasses, tongs, sample(s) of rock (granite, sandstone or shale)
Prac 2 Unit 9.4
Acid rain
Aim To simulate the effect of acid rain on
various rocks
Equipment
Safety glasses, watch-glass, eyedropper, dilute sulfuric acid, samples of rock (limestone, marble, sandstone, shale, granite, basalt), 3 x 100 mL beakers, hammer
Method
1 Put your safety glasses on. 2 Three-quarters fill the tin with cold water. 3 Hold a small piece of rock in a blue Bunsen burner flame with tongs. 4 After about a minute, carefully drop the hot rock into the water. 5 Carefully observe what happens. 6 Once cool, repeat 23 times with the same rock, recording your observations.
Method
PART 1 1 Place the rock sample on the watch-glass. 2 Place 23 drops of acid on the surface of the rock. 3 Record your observations. PART 2 1 Measure out three identical samples of limestone or marble chips. 2 Use a hammer to make the particles in one pile large, another medium and the last small. 3 Place each pile in a 100 mL beaker. 4 Add the same volume of dilute sulfuric acid to each. 5 Record the time required to completely dissolve the limestone.
Questions
1 Identify the type of weathering you are simulating. 2 Draw a conclusion about the effect of changing temperatures on rock. 3 Explain other ways that temperature changes can crack rock.
Questions
1 Identify the type of weathering you are simulating. 2 Draw a conclusion about the effect of acid on rock. 3 Draw a conclusion about how the size of a rock affects the rate at which it is damaged.
268
9. 5
We live in a thick layer of gases that surrounds the Earth. This layer is what we call air. Scientists know the layer of gases as the atmosphere. The atmosphere moves and swirls about us, often quite violently, with winds, storms, cyclones and tornadoes. It stretches about 800 km from the Earths surface, providing us with oxygen to breathe and clean water to drink. It also protects us from the harmful radiation from the Sun and from stray meteorites. The atmosphere is very important to all of us, and without it we would not be here.
UNIT
context
120
ionosphere
110
100
90
80
60
Altitude (km)
50
40
30 ozone 20
stratosphere
10
Mt Everest
troposphere
0 100
Layer upon layerthe Earths atmosphere. The temperature at each level is shown as the solid curve.
Fig 9.5.1
269
The atmosphere
>>>
2 fossil fuels: every time fossil fuels such as petrol, oil, gas and coal are burnt in car engines, factories, homes and power stations, carbon dioxide is produced 3 rotting garbage in tips breaking down to release carbon dioxide. Australians alone add 70 million tonnes (1 tonne = 1000 kg) of carbon dioxide to the atmosphere each year.
Carbon dioxide is increasing in concentration.
360 350
Fig 9.5.3
Fig 9.5.2
Space shuttle image of the clouds and weather patterns in the troposphere
The region called the ionosphere begins near the top of the stratosphere and extends Shooting stars through the mesosphere and A shooting star is actually thermosphere, but is most a meteor: what you are noticeable at altitudes above about seeing is a small rock, 80 km. The ionosphere is also the size of a walnut, maybe burning up 100 km or so where meteors begin to burn up above the Earth. and where harmful gamma rays from the Sun are screened out. The final layer is the exosphere, which begins at about 600 km and extends out into space.
1900
Year
1950
2000
Whats in air?
The air we breathe is made up of more than ten different gases. One of the most important gases in the air is oxygen (O2). This is the gas that humans and all other animals breathe. Although only making up 21 per cent of the atmosphere, it is constantly being replaced by plants. Like animals, plants also use some of the oxygen in air to produce energy. Only a tiny 0.03 per cent of the atmosphere is carbon dioxide (CO2). It is vital to plants since they use it to make their own food. CO2 is also one of the gases animals breathe out. The amount of carbon dioxide in our atmosphere is increasing due to: 1 forest depletion: trees use up carbon dioxide and every tree that is cut down increases the amount of this gas in the atmosphere by reducing the amount removed from the air
At 78 per cent, nitrogen is the most abundant gas in the atmosphere. It seems to have little use except to dilute the oxygen gas to levels that animals can breathe without feeling ill. Pure oxygen can be poisonous to animals and plants. In the middle level of the stratosphere lies a 1520 km thick layer of ozone (O3).
270
Radiation passes straight through glass instantly Radiation passes straight through atmosphere instantly greenhouse
Heat cannot escape easily through carbon dioxide so atmosphere stays warm.
Heat energy cannot escape through glass easily so greenhouse stays warm
The greenhouse
The atmosphere
Fig 9.5.4
Compare the two diagrams and you will see why it is called the greenhouse effect.
Overnight this stored heat is released slowly back into the air, warming it up. If all this heat escaped back to space, we would freeze at night. Clouds, water vapour and gases such as carbon dioxide and methane reduce this loss to space and keep the atmosphere warm. Carbon dioxide is very effective in trapping this heat. This greenhouse effect keeps the Earth at a temperature that can support life. It is a natural and essential phenomenon. The enhanced greenhouse effect is caused by an increase in the amount of carbon dioxide (and some other pollutant gases) in the atmosphere. The amount of CO2 in the atmosphere has increased by 37 per cent since the early 1800s. Many scientists believe that this increase has led to a warming of the Earth global warming. Glaciers have been gradually retreating (melting and getting smaller), huge icebergs are breaking off Antarctica more than ever before, and the ice has been getting thinner in Greenland. Are these indicators that the temperature is rising? Science and technology have led to many inventions and activities that add CO2 to the air. We do not yet fully understand the implications this might have for society and the environment in the future. Australian scientists predict that some of the following changes may occur:
The melting of much of the polar ice caps would raise sea levels, flooding coasts, cities and some entire island countries. Expansion of the water in the oceans would also raise sea levels, causing further flooding. Increases in the numbers of wild storms and cyclones. Cyclones could move further south. More droughts and heatwaves. More bushfires. Less rain and snow. Ski resorts may go out of business. People will need to collect their own water with tanks. The places animals and plants live in will change. Some may become extinct. Increased temperatures may cause bacteria to grow faster, causing more disease in humans and other animals. Some plants may grow faster with higher temperatures. This would be good news for farmers. But less rain may mean that farmers can grow fewer plants and fewer varieties. Increased heat may cause more humans to suffer from heat stroke and illness. With all these possible changes to the environment it is clear that we must start reducing the amount of greenhouse gases Prac 2 we release into the atmosphere. p. 275
271
UNIT
9. 5
The atmosphere
Are global temperatures increasing?
>>>
Fig 9.5.5
1.2 Change in average temperature (C) 1.0 0.8 0.6 0.4 0.2 0 1880 1900 1920 1940 Year 1960 1980 2000
Career profile
Greenhouse engineer
Engineers are like designers. A greenhouse engineer is really an environmental engineer. Environmental engineers work to design ways to do things better, so that we reduce the impact of humans on the environment. The greenhouse engineer provides advice and services on energy management and greenhouse gas reduction to companies and the government. Environmental engineers are in one of the fastest-growing job areas as we try to find ways to live without harming the Earth. Greenhouse engineers can be involved in: measuring greenhouse gas emissions. carrying out environmental audits reviewing facilities to identify where environmental improvements can be made finding ways for companies to reduce greenhouse gas production. A good greenhouse engineer will be able to: work as part of many different teams communicate with people from many different backgrounds apply the scientific method to collect and analyse data
Fig 9.5.6
give people clear advice on how to improve what they are doing be passionate about environmental issues.
272
1980
1990
2000
Fig 9.5.7
In 1985 it was discovered that the ozone layer over Antarctica was getting thinner: a hole had been forming, allowing more UV radiation through to the Earths surface. Concern that the thinning of the ozone layer could spread worldwide led to restrictions on the use of chemicals called chlorofluorocarbons. Chlorofluorocarbons (CFCs) are chemicals known to react with ozone, destroying it.
Until recently CFCs were used as the propellants in aerosol cans, in the production of polystyrene and as a coolant in air conditioners and refrigerators. It is thought that these gases slowly rise up into the ozone layer and are reacting with it, causing the hole. It is now reported that the ozone hole has shrunk a little over the past couple of years. This shows that we can solve environmental problems through scientific research and international cooperation.
UNIT
9.5
[ Questions ]
4 Describe what happens to the air temperature as we go higher in the: a troposphere b stratosphere c mesosphere d ionosphere
Checkpoint
Layer upon layer
1 Copy the following, and modify any incorrect statements so they become true. a Humans live in the ionosphere. b Commercial aircraft travel in the stratosphere. c Oxygen is the most common gas in the atmosphere. d Meteors burn up in the troposphere. e The ionosphere protects us from X-rays and gamma rays. f The ozone layer is part of the stratosphere. g Weather happens in the troposphere. h Most of the air is in the ionosphere. 2 The atmosphere does not escape into space. Explain why. 3 Identify the layers of the atmosphere that could be considered the: a hottest b coldest c thickest
Whats in air?
5 Identify the main gases in air and state the percentage of each. 6 Each gas in air has a purpose. Describe a purpose for each gas you listed for Question 5.
>> 273
UNIT
9. 5
The atmosphere
>>>
[ Extension ]
Action
1 The enhanced greenhouse effect is a very serious problem. a As a class or in large groups, organise an information display about the enhanced greenhouse effect and global warming. You should include information to teach people about: what the greenhouse effect is what the enhanced greenhouse effect is and its causes the possible effects of the enhanced greenhouse effect on Australia how people can help reduce the problem through everyday decisions. b Your display should use different ways to communicate such as signs, posters, pictures, video, sound and activities. Make it fun! c Get your display set up in the science area or at science day, open day or even a local shopping centre.
11 Describe two effects that the enhanced greenhouse effect may have on Australian society.
Think
15 State what these abbreviations stand for. a O2 b O3 c CFC d UV e IR f CO2 g SO2 16 Accurately draw a pie chart showing the percentage of each gas in the atmosphere. 17 Sea levels are expected to rise in the future. a Provide a possible reason for this. b Identify where the water would come from. c Describe the possible effects of this. d Describe three ways in which humans are adding CO2 to the atmosphere. e Propose three ways in which you could reduce the amount of carbon dioxide you personally produce every day. 18 Even though CFCs are generally not used now, they will react with the ozone layer for many more years. Propose a reason why.
Investigate
2 Record in a diary the day and night temperatures reached over a week and the amount of cloud cover each night. Which days had the greatest difference between day and night temperatures? What was the cloud like on those days? Summarise your findings. 3 a Investigate how sunscreens work. What does the SPF number on a sunscreen indicate? b Examine reasons why Australians are more likely to develop skin cancer, and recommend ways to minimise the risk. Produce a sign/poster for use at the beach to inform sunbathers of the skin cancer risk and solutions.
Analyse
19 The troposphere is the atmosphere of Earth. Explain why: a this statement is wrong b this statement has some truth in it 20 Use Figure 9.5.5 to find the average increase in the average temperature of Earth between: a 1880 and 1990 b 1940 and 2000 21 State which 20-year period showed the greatest increase in Earths temperature.
274
UNIT
9. 5
Prac 1 Unit 9.5
[ Practical activities ]
An already wet planet
Aim To calculate the percentage of water on the Earths surface. Equipment
A4 map of the world, graph paper, calculator
Prac 2 Unit 9.5
Method
1 Trace out the main continents from a map of the world onto graph paper. 2 Count the number of squares covered by the continents. 3 Do not count squares that are less than half-filled. Count squares that are more than half-filled as full squares. 4 Use subtraction to calculate the number covered by water. 5 Use a calculator to find the percentage of the Earth that is land by completing this calculation:
100 x Earth squares total squares
1 On the map from the previous activity, extend inland all the oceans, seas and bays by one graph-square. 2 Reduce the lands covered in ice by two graph-squares.
Questions
1 Identify which pieces of land have completely disappeared. 2 Describe six problems that would occur in a shrunken world like this. 3 Identify what could cause this to happen in reality.
Questions
1 Did you count the number of squares covered by lakes and rivers, islands and small land masses? If not, explain why. 2 About 29 per cent of the Earths surface is land, while the other 71 per cent is water (97 per cent of that is salt water, 2 per cent is stored as ice in Antarctica and Greenland). Describe any difference between the percentages that you calculated and the percentages given here. 3 State three suggestions as to why your percentages may be different to those given.
275
UNIT
9. 5
Fig SF9.2
On the temperature line, the troughs represent the ice ages when the average temperature was up to six degrees lower than today. The peaks are when warmer periods occurred on Earth.
CO2 and temperature over 420 000 years Predicted level CO2 in 2100
Fig SF9.1
This piece from an ice core shows tiny bubbles of trapped air from the atmosphere.
The graph in Figure SF9.3 shows carbon dioxide levels in the Earths atmosphere for the last 420 000 years. It is normal for the level of carbon dioxide to go up and down, but the amount of carbon dioxide in the atmosphere is now at the highest level ever. Notice that the Earths temperature changes in line with changes in the amount of carbon dioxide in the air.
10 400 000
100 300 000 200 000 100 000 now Predicted Years before present CO2 Temperature
Fig SF9.3
Carbon dioxide levels over the past 420 000 years. The graph shows a prediction for the year 2100 if humans keep increasing carbon dioxide levels at the current rate.
276
rise, possibly flooding many low-lying and coastal communities. This has already created great concern for communities on many small islands. These people are worried that as the oceans rise their whole islands may be lost below the water. Many models on global warming predict that Australia will become drier as temperatures slowly increase. (More possible effects are listed in Unit 9.5.) One thing that is clear is that the Earth is slowly warming, and there is new and stronger evidence that most of the warming observed over the past 50 years has been caused by human activities.
Fig SF9.5
There is already worldwide evidence that glaciers are receding and shrinking back up the mountains. Global warming is melting glaciers faster than a few years ago.
Fig SF9.4
277
Climate change: The Earth is experiencing a major change in climate. Climate change caused by humans will persist for many centuries. Research is required to collect more information in order to increase our understanding of what may happen in the future. To stop carbon dioxide levels rising we need to produce less carbon dioxide.
[ Student activities ]
1 A lot of Australias electricity and transportation is now produced by the burning of fossil fuels such as coal. , Australians possibly produce more greenhouse gases per person than anyone else in the world. a List the ways that you produce greenhouse gases like carbon dioxide. b List the ways that you, as an individual, can contribute to reducing greenhouse gas emissions. c Pick one of the items on your list and make an effort to do this activity. d Report back to the class about how successful you have been in reducing the amount of carbon dioxide you produce. 2 Many people think that the contribution of an individual will make no difference. But it is definitely true that many little contributions will quickly add together to ultimately make a large contribution. Discuss this topic in small groups. a Explain why some people think that an individual cannot make a difference. b Describe a number of examples to prove that lots of little contributions can add up to be very significant. c Describe why many people, such as friends and family, may find it difficult to make any changes to reduce their use of fossil fuels and electricity use. d List ways that you can help others make small contributions that collectively will reduce the greenhouse emissions created by your school, your home and your community. 3 Connect to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, by selecting chapter 9 and clicking on the destinations button. Use the web links available to research the following questions. a Which countries produce the most greenhouse gases? b What is the predicted rise in sea levels over the next 50 years? c Which locations and countries are most at risk from rising sea levels? 4 The world community was concerned enough about global warming to produce the Kyoto protocol. This document was designed to get all countries to agree on ways to produce less carbon dioxide and other greenhouse gases. As of 2004, both Australia and the USA had still not signed the Kyoto protocol. a Research this issue and find out reasons why some say we should sign up while others think we should wait until the evidence is clearer. b Organise a class debate based on the following topic: Australia and the USA should sign the Kyoto protocol as soon as possible.
278
9. 6
We often talk about the weather. Its too hot, Its too cold or sometimes Today is perfect weather for . Sometimes we like the wind, as it helps clothes dry and yachts race, but at other times it messes our hair or blows dust into our eyes. The weather affects our everyday decisions such as what we wear, how we travel, and where we go. Extreme weather causes floods, drought and often destruction. It is therefore important to understand this most important part of our lives.
UNIT
context
The Earths equator receives a lot more concentrated heat and light energy from the Sun than do the poles, causing the air over the equator to rise and the air over the poles to drop. Convection currents take warm air to the poles and cooler air back to the equator. The atmosphere is also swirled around by the spin of the Earth, creating a series of winds called tradewinds.
Wind
As air is heated, it expands and becomes lighter or less dense and has lower pressure. Cold air is heavier, more dense and has a higher pressure than warmer air. Because of this, hot air rises while cold air drops. This process is called convection and happens in our houses, the kitchen oven and in the atmosphere.
The Suns heat is spread over a smaller area at the equatorthis makes the equater hotter.
equator hot air rising air moving in to replace air that has risen warm air moving to cooler region
Fig 9.6.1
cold air sinking
Fig 9.6.2
In theory, this would cause winds that always blow roughly in the same direction, but winds dont actually do this. The Sun heats different materials at different rates. Land areas heat up more quickly than lakes, oceans and the seas. Dark colours increase in temperature faster than light colours. This means that bitumen roads, carparks, newly ploughed fields and dark-coloured rocks such as basalt heat faster than sand and marble, fields of crops and shiny metal roofs. Convection currents and winds are created because of differences in temperatures and air pressures in a small area.
279
Weather
>>>
water, forming clumps of small droplets that we normally call clouds. If the clouds cool further by being pushed upwards or over colder regions, the tiny droplets begin to join to make bigger drops that will fall as rain or, if cold enough, sleet or snow. Tiny specks of high floating dust often start the process. Sometimes it is cold enough for the water vapour to cool just above the land, forming fog. Hail formation is still not fully understood. One explanation is that the Severe thunderstorms supercooled raindrops freeze These usually develop in the on the surface of dust particles late afternoon when the atmosphere is moist and or snow. These small unstable. High cumulonimbus hailstones are blown up and clouds rapidly develop with down inside the cloud by the lightning, thunder, severe wind gusts, heavy rain and large storms wind. They gradually hail. Many thunderstorms are gather more water and shortlived (about one hour), increase in size until they and limited in size. They can become too heavy and fall travel large distances and cause significant damage. The to the ground. Another 1999 Sydney thunderstorm explanation is that they grow was unusual in that it lasted in size as they fall through over five hours, with hailstones measuring up to the storm cloud. 9 cm. The rain, hail and wind All this water evaporating affected 22 000 properties, and falling back as rain forms with $2 billion in insurance part of the water cycle, as losses. shown in Figure 9.6.5.
Clouds are cooled water vapour. This is called condensation. If the drops are heavy enough, they fall as rain. This flow of water from sea to clouds to rain, then run-off from land to sea, is called the water cycle.
Fig 9.6.3
Local winds are caused by different heating rates, and differences in air pressure.
Fig 9.6.4
pressure variation
surface wind
Fig 9.6.5
Winds move from areas of high pressure to fill the gap created in areas of low pressure.
clouds form
280
e Stratus clouds produce drizzle or fine rain. They may form fog at low levels.
Fig 9.6.6
Clouds
A satellite image of a low pressure weather system off Australias southern coast. Note that the winds spiral clockwise and move towards low pressure.
Fig 9.6.7
281
UNIT
9. 6
Weather
>>>
dry air sinking
eye
rain
Fig 9.6.8
Career profile
Meteorologist
Meteorologists forecast the weather and study the atmosphere to improve our understanding of the Earths climate. Meteorologists can have a major effect on both society and the environment. Their weather predictions affect our society every day, especially when the forecast is inaccurate. Their advance warnings for dangerous weather can save both lives and property. A meteorologist can be involved in: using different scientific instruments to forecast the weather examining satellite images of clouds for dangerous weather preparing special reports for shipping, agriculture, fishing and flying issuing warnings of cyclones, storms, floods, frosts, fire dangers and strong winds reporting air pollution. A good meteorologist will be able to: record and analyse many different types of data be part of a team use different instruments to gather data in the field write accurate reports.
Meteorologists releasing a weather balloon to measure temperature and humidity in the atmosphere
Fig 9.6.9
282
UNIT
9. 6
Wind
[ Questions ]
Analyse
17 Predict the direction of the winds in the areas shown in Figure 9.6.10. Fig 9.6.10
forest
Checkpoint
1 Copy the following and modify any incorrect statements so they become true. a Hot air rises and cold air drops. b The equator receives more concentrated heat energy from the Sun than the poles do. c Hot air circulates away from the poles to the equator. d Tradewinds are local winds. e All rocks heat up at the same rate.
bitumen
road
land
sea
Think
9 Explain why it is unwise to eat snow. 10 Explain why the poles would be even colder if there were no convection currents. 11 Predict whether the temperatures at the equator would be higher or lower if there were no convection currents. 12 Gliders often increase their height by riding thermals (rising hot air). Identify where these might be found. 13 Draw a simplified diagram to demonstrate the water cycle. 14 Plants are also involved in the water cycle. Describe how you think they fit in. 15 The water in your body could once have been in the body of a great scientist. Explain how this could be possible. 16 In your own words, summarise the role of a meteorologist.
black rocks
18 Gather weather maps from the newspaper for one week. Then use each map to do the following: a Draw arrows on the maps to indicate the directions you would expect the winds to blow. b Shade areas where it would be warmer in red, and cooler in blue. c Draw water drops or snow flakes where you would expect rain or snow. d Write a summary to describe Australias weather over the week.
283
UNIT
9.6
Weather
>>>
[ Extension ]
Investigate
1 Keep a diary of the types of clouds you see over the next week and any rainfall (none, rain, drizzle, spitting) that occurs. 2 Investigate how tornadoes form and why they are rare in Australia but common in the USA. Also find out how storm chasers in the USA collect information about tornadoes. 4 Set up a weather station in your school grounds and monitor the weather.
Surf
5 Look at satellite photos of the weather and learn more about forecasting by connecting to the Science Focus 1 Companion Website at www.pearsoned.com.au/schools, selecting chapter 9, and clicking on the destinations button.
Action
3 Construct a model of the water cycle using a fish tank with a lid on. Set up the inside of the tank to look like a part of the surface of the Earth. Attach labels to the outside of the glass to explain what is occurring in each part of the tank.
DYO
UNIT
9. 6
Prac 1 Unit 9.6
[ Practical activity ]
Making clouds
Aim To determine what conditions are needed to
make clouds
Method
1 Heat about 100 mL of water in the beaker until boiling. 2 Turn off the gas and cover the beaker with an evaporating dish. 3 Observe and note in your results what happens. 4 Repeat the experiment but this time place ice cubes in the evaporating dish as shown in Figure 9.6.11. 5 Write down your observations in your results.
Equipment
400 mL beaker, ice cubes, evaporating dish, Bunsen burner, bench mat, tripod, gauze mat and matches, safety glasses
ice cubes
Questions
evaporating dish 400 mL beaker
1 Explain what water vapour is. 2 Describe what happens to water vapour as it cools. 3 Explain how cooling water vapour could cause a cloud.
Fig 9.6.11
284
Chapter review
[ Summary questions ] [ Thinking questions ]
Use a diagram to explain why: a the Mediterranean Sea is being slowly squeezed shut b the Atlantic ocean is getting wider c the Himalayan mountains are getting higher Identify in which layer of the atmosphere is: a the ozone layer b the layer we live in Describe where the ozone hole is located. Describe the effects in the future if: a the ozone hole continues to increase b carbon dioxide concentrations increase further c acids are continually released into the air List eight types of cloud in order from those most likely to give heavy rain to those that will not bring any rain. Compare the following items: a rock and mineral b crystal and mineral c pigment and streak d rock and ore Identify the element that may be extracted from chalcopyrite. Match a rock type to a description. 3 1 True or false? a The radius of the Earth is approximately 12 800 km. b The thickest layer of the Earth is the mantle. c Sedimentary rock is a type of mineral. d Rocks can contain a number of different minerals. 4 e The mantle is where most volcanic and earthquake activity occurs. f The crust is thickest under the continents. g The moving around of pieces of rock by wind and 5 water is called weathering. 6 h The layer of the atmosphere that humans and animals live in is called the stratosphere. i The magnetic field of the Earth comes from movements in the outer core. 7 j Winds move in a clockwise direction around a low. k Condensation is the name given when water turns 8 from liquid to vapour. l Hot air is more dense than cold air. m Water heats up more quickly than rock. n The Sun heats up the atmosphere. o Australians add 70 tonnes of carbon dioxide to the atmosphere each year. 9 p At night the Earth releases heat back into the atmosphere. 10 q Greenhouse gases trap heat in the atmosphere. Rock type r More CO2 in the atmosphere traps more heat. Sedimentary s Clouds help trap heat in the atmosphere Metamorphic on cold nights. Igneous 2 Draw simplified diagrams to demonstrate any three of the following: a the rock cycle 11 b the water cycle c the Earths structure 12 d the greenhouse effect 13 e acid rain
Description
Formed from molten material Made from broken down particles compressed into layers Made from other rocks changed by heat and/or pressure
Identify two uses for each major type of rock. Describe two uses that Aboriginals had for rocks. a Explain the term ochre. b Describe how ochres were prepared and used by the Aboriginals.
>>
285
>>>
[ Interpreting questions ]
14 Copy and complete the following table to summarise the science careers covered in this chapter.
Job title
Geologist Palaeontologist Environmental scientist Greenhouse engineer Meteorologist
Main tasks
Skills required
15 Identify two other science careers not included in the table in Question 14, but mentioned in this chapter. 16 Draw a diagram to demonstrate the wind direction around a low-pressure system. 17 Make a sketch to demonstrate the air movement around a cyclone. 18 Place in order from hardest to softest: calcite, quartz, corundum, topaz. 19 On Mohs scale a particular mineral has a hardness of 6.5. Identify a mineral it would: a be able to scratch b not be able to scratch 20 Classify as sedimentary, igneous or metamorphic: a shale b sandstone c granite d limestone e conglomerate f gneiss g basalt
21 List these layers of the Earth and atmosphere in the correct order starting from the centre of the Earth: outer core, stratosphere, troposphere, mantle, inner core, ionosphere, mesosphere, troposphere, crust. 22 From the list in Question 21, identify which layer: a is the hottest b is about 2025C on average c is made of liquid rock d is where the jet stream winds occur e contains most of the air f is made mostly of iron and nickel
Worksheet 9.5 Our planet Earth wordfind Worksheet 9.6 Sci-words
286
absorption of heat, 123 of liquid, 75 of sound, 140 acceleration, 183 acid rain, 264, 265 activated sludge process, 82 aeration tank, 82 amphibians, 162 animals, classification, 161168 arachnids, 166 Aristarchus, 216 Aristotle, 216 arthropods, 166 asteroids, 221 astronomical unit, 217, 231 astronomy, 6, 228230 indigenous, 228 atmosphere (Earths), 269273 aurorae, 233 autotrophs, 149 bacteria, 94 beam balance, 1920 bearings, 192 bimetallic strip, 49 binominal name, 157 biology, 6 birds, 163 boiling (liquid), 42 Brahe, Tycho, 217 breezes, wind and sea, 121122 Brown, Robert, 37, 97 Brownian motion, 37, 4647 Bunsen, Robert, 27 Bunsen burner, 2728 buoyancy, 204 carnivorous plants, 149 cathode ray oscilloscope (CRO), 140141 cells, 87106, 151 animal, 95 cloning, 104, 108110 human, 99, 103106 parts of, 95 plant, 96, 100 stem, 108111 theory, 94 Celsius, Anders, 118 centrifuging, 70 changes of state, 4144 characteristics (of life), 148 chemistry, 6 chlorine, 79 chlorofluorocarbons, 273 chlorophyll, 96 chloroplast, 96 chordates, 161, 174 chromatography, 61, 75, 78 classification, 155158 animals, 161168, 174 indigenous, 167168 keys, 176178 plants, 171174 climate change, 276278 coal, 258 clouds, 280281 cnidarians, 165 cold blooded, 149 colloid, 64 compass, 209 compression in liquids, 36 in sound waves, 137 concentration, 63 conclusion, 6 condensation, 42, 280
conduction, 118119 contraction, 48, 49 convection, 120122 Copernicus, Nicolas, 216, 229 crustaceans, 167 crystallisation, 74 cyclone, 281 day and night, 235 decanting, 69 decibel scale, density, 5456, 204 diffuse reflection, 130 diffusion, 37, 40 dilute, 63 dissolving, 37 distillation, 7475 domain (magnetic), 209 drag, 201 dyke, 256 Earth, 219220 crust, 247 mantle, 247 core, 247248 earthquakes, 248 echoes, 139 echolocation, 139140 eclipse lunar, 241242 solar, 233 ecology, 6 ectothermic, 149 elastic, 183 electrolytes, 79 electromagnetic waves, 122 electrostatic separation, 71 emulsion, 64 endothermic, 149 energy, 113115 conservation, 115 heat, 118123 kinetic, 113 light, 129132 potential, 113 production, sound, 137142 source, 115 transformation, 114 enhanced greenhouse effect, 271 environmental scientist, 266 equinox, 237 equipment, 12, 28 drawing of, 1213 erosion, 260, 264265 and people, 265266 errors parallax, 19 reading, 18 zero, 19 evaporation, 74, 280 excretion, 150 exoskeleton, 166 expansion, 4851 experiment, 6, 46 family, 156 fertile, 157 filtration, 6970 fish, 163164 floating and sinking, 5556 flocculation, 79 fluoride, 79 foam, 64 forces balanced/unbalanced, 188189, 201202 contact, 183193 drawing, 184
frictional, 188, 191193, 201202 gravitational, 188, 196197, 201202 in water, 204205 magnetic, 208210 measuring, 184 non contact, 196197, 208210 freezing, 42 friction, 188, 191193, 201202 reducing, 192 using, 192193, 202 froth flotation, 71 fungi, 172173 Galileo, 217, 222, 230 Galle, Johann, 224 gases, 37, 4243, expansion of, 5051 gel, 65 genus, 156 geology, 6 geologist, 261 global warming, 271, 276 evidence of, 276277 gravity, 188, 196197, 201202 separation, 70 Great Barrier Reef, 277 greenhouse effect, 270271 enhanced, 271 growth, 151 heat, 118 energy, 118123 hemispheres, 237 Herschel, William, 223 heterotrophs, 149 Hooke, Robert, 87, 93 humans, impact of, 265266 hurricane, 281 hypothesis, 24 igneous rocks, 256257 extrusive, 256 intrusive, 256 uses of, 257 images (reflections), 131 imperial units, 18 inference, 9 insects, 166 insoluble, 63 insulation, 119120 invertebrates, 165167 ionosphere, 269, 270 joule, 113 Joule, James, 113 Jupiter, 221222 Kepler, Johannes, key, 158 branching, 176 circular, 177178 dichotomous, 158 tabular, 158, 177 kingdom, 156 lateral inversion, 131 lava, 256 law of reflection, 130131 light, 129132 Linnaeus, Carolus, 156 lime, 79 liquids, 3536, 4142, 4950 expansion of, 4950 luminous (and non-luminous), 129 lunar eclipse, 241242 landscape, 240
287
INDEX
Index
Magellan Venus orbiter, 218 magma, 256 magnetic fields, 209210 forces, 208210 separation, 70 magnets, 208210 electromagnet, 209 mammals, 164 Mariner (space probe), 218, 219 Mars, 220221 marsupials, 164 mass, 196, 197 matter, 35 measurement, units of, 1819, 118 measuring, 1820 equipment, 2021 forces, 2021, 184, 196 mass, 2021, 196, 197 melting, 41 meniscus, 19 Mercury (planet), 217 mesosphere, 269 Messenger (space probe), 218 metamorphic rocks, 259 meteorologist, 282 metric system, 18 microscope, 8791 compound, 87 electron, 8991 simple, 87 sketching images, 89 stereo, 8788 using a, 8889 mineralogist, 251 minerals, 251 indigenous uses, 252 properties, 252253 mirror plane, 131 mist, 65 mistake, 1819 mitrochondria, 95 mixtures, 6265 separation, 6871, 7475 molluscs, 167 monera, 173 monotremes, 164 Moon, 239242 landscape, 240 phases, 240241 statistics, 239 multicellular, 99 music, 141 Neptune, 224 Newton, Sir Isaac, 184 newtons, 196 normal, 130 nuclear fusion, 231 observations qualitative, 9 quantitative, 9 order, 156 ores, 253254 organs, 103 organisms multicellular, 99100 unicellular, 100101 ozone, 269270, 273 hole, 272273 layer, 269, 270 paleontologist, 259 parallax error, 19
>>>
particle model, 3537 Pathfinder mission to Mars, 221 pebble bed filter, 82 petrologist, 251 photosynthesis, 96, 149 phylum, 156 physics, 6 planets, 216225 plants, classification, 171175 plate tectonics, 249 Pluto, 224225 pollution, 264, 265, 266 predictions, 9 pressure (and weather), 279281 protists, 173 Ptolemy, 216, 229 Pythagoras, 216 qualitative observations, 9 quantitative observations, 9 radiation, 122123 rain, 280 ray tracing, 131 reading error, 18 reflection heat, 123 light, 130 refrigerators, 42 regular reflection, 130 reports, 1516 reproduction (sexual, asexual), 151 reptiles, 162 resonance, 141 reverberation, 140 rock cycle, 260 rocks igneous, 256257 metamorphic, 259 sedimentary, 257258 safety in the laboratory, 3 saturated solution, 63 Saturn, 222223 Schleiden Matthias, 94, 98 Schwann, Theodor, 94, 96 scientific drawings, 1213 equipment, 1213, 2728 models, 3537, 4647 reports, 15 seasons, 236237 sediment, 63, 257, 264 sedimentary rocks, 257259 separation of mixtures, 6975 septic tank, 81 settling tank, 82 sewage, 8182 sewerage, 81 shadows, 129130 sieving, 69 sky diving, 202 smells, 3738 smoke, 65 soda ash, 79 solar atmosphere, 232 eclipse, 233 energy, 231233 flares, 232 prominences, 233 statistics, 232 wind, 233 solar system, 216225 geocentric, 216, 229 heliocentric, 216, 229 history, 216217, 228230 solidification, 42 solids, 3536, 4143, expansion of, 4849 sols, 64 solstice, 237 solubility, 63 solute, 62 solutions, 6263 solvent, 62 sonic boom, 139 sound, 137142 graphs, 140141 levels, 141142 speed, 139 transmission, 137 waves, 137138 space, Earths movement in, 235237 species, naming, 157 specific gravity, 56 states of matter, 35, 4144, 4647 stimulus, 150 storms, 280, 281282 stratosphere, 269 sublimation, 43 Sun, 231233 prominences, 233 sunspots, 232 surface tension, 204205 suspensions, 63 taxonomy, 155 temperature, 118 thermos flasks, 123 thermosphere, 269 thrust, 201 tides, 241 tissue, 103 Tombaugh, Clyde, 224 tradewinds, 279 troposphere, 269 typhoon, 281 ultrasound, 140 unicellular organisms, 100101 Uranus, 223 vacuoles, 95 van Leeuwenhoek, Antoni 91 vaporisation, 42 variables, 2425 Venus, 218219 vertebrates, 161164 Viking (space probes), 220 virtual image, 131, 132 volcanoes, 248 volume, 55 Voyager (space probe), 221, 222, 223, 224 warm blooded, 149 water cycle, 280 expansion of, 4950 supply, 7982 waves electromagnetic, 122 sound, 137138 longitudinal, transverse, 138 weather, 276278, 279282 weathering, 260, 264266 biological, 264 chemical, 264265 physical, 264 weight, 188, 196, 197, 201202 wind, 121122, 269, 279 worms, 167 year, 236
288