You are on page 1of 1

35 Howard Street Phillipsburg, New Jersey 08865 Tel: 908-213-7070 Fax: 908-213-7069 www.accuratus.

com

99.5% Alumina Material Properties

Mechanical Density Porosity Color Flexural Strength Elastic Modulus Shear Modulus Bulk Modulus Poissons Ratio Compressive Strength Hardness Fracture Toughness KIC Maximum Use Temperature (no load) Thermal Thermal Conductivity Coefficient of Thermal Expansion Specific Heat Electrical Dielectric Strength Dielectric Constant Dissipation Factor Loss Tangent Volume Resistivity

Units of Measure gm/cc (lb/ft ) % (%)


3

SI/Metric 3.89 0 ivory

(Imperial) (242.8) (0) (55) (54.4) (22) (33) (0.22) (377) (3180)

MPa (lb/in x10 ) GPa (lb/in x10 ) GPa (lb/in x10 ) GPa (lb/in x10 )
2 6 2 6 2 6 2 3

379 375 152 228 0.22

MPa (lb/in x10 ) Kg/mm MPam


2 1/2 2 3

2600 1440 4 1750

C (F)

W/mK (BTUin/ft hrF) 10 /C (10 /F) J/KgK (Btu/lbF)


6 6

35 8.4 880

(243) (4.7) (0.21)

ac-kv/mm (volts/mil) @ 1 MHz @ 1 kHz @ 1 kHz ohmcm


5

16.9 9.8 0.0002

(420) (9.8) (0.0002)

>10
14

*All properties are room temperature values except as noted. The data presented is typical of commercially available material and is offered for comparative purposes only. The information is not to be interpreted as absolute material properties nor does it constitute a representation or warranty for which we assume legal liability. User shall determine suitability of the material for the intended use and assumes all risk and liability whatsoever in connection therewith.

ACCURATUS: Latin careful, precise, accurate

You might also like