Professional Documents
Culture Documents
Two point angular perspective is the technical drawing for a two point perspective. The difference between what you know and this drawing if that we need to shoe the correct projection lines from the plan view to come up with the 3D image.
Picture Plane: an imaginary transparent plane (face) on which the plan view sits on. This is placed about of the way up the page.
There are 3 lines we need to include in this drawing: Picture plane Eye level line Ground line
Picture plane
Step one:
Eye Level Line: The eye level line is the sightline determining the direction in which the observer is assumed to be looking
There are 3 lines we need to include in this drawing: Picture plane Eye level line Ground line
Picture plane
Step two:
Ground line: Ground line is the line that represents the ground, the 3D projection will sit near this line
There are 3 lines we need to include in this drawing: Picture plane Eye level line Ground line
Picture plane
Ground Line
Step three:
Station Point: this shows where the person and the eye of the observer stands
Picture plane
Station point
Ground Line
Step four:
Now we have the layout of lines and points done, we need to draw in our plan view . This should sit on the Picture Plane
Picture plane
Station point
Ground Line
Step five:
Firstly, find the angle of the plane Secondly, take the same angle from the station point to the picture plane
Picture plane
30
Station point
Ground Line
Step six:
Where those lines (the ones you just drew) meet the picture plane, take vertical lines down to the E.L.L. Next, draw a horizontal line through the station point, where the vertical and horizontal lines meet are our 2 VANISHING POINTS.
Picture plane
30
V.P
Ground Line
Step seven:
PROJECTION LINE STEPS Take plan corners to the picture plane by lining it up to the station point
P.P
V.P
V.P
E.L.L
S.P
G.L
Step Eight:
PROJECTION LINE STEPS Take plan corners to the picture plane by lining it up to the station point Then take them from the picture plane down vertically to the ground line.
P.P
V.P
V.P
E.L.L
S.P
G.L
Step Eight:
PROJECTION LINE STEPS Height line: The height line will be taken from the closest corner of the object to the picture plane. (it may be touching it, like this case). To find the H.L take a vertical line from where the corner touches the P.P down to the G.L
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step Nine:
PROJECTION LINE STEPS With all the projection lines in we now need to put an elevation in ( sitting on the G.L)
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step Ten:
Construction of Perspective With all the projection lines in we now need to put an elevation in ( sitting on the G.L)
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step eleven:
Construction of Perspective As out elevation drawings show our height of the building and the sizes on the exterior of the building, we need to take projection lines from the elevation across the page.
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step Twelve:
Construction of Perspective Now we have all the projection lines we can construct the 3d image by taking the closest point on the plan that is projected onto the ground line, to the vanishing points.
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step Thirteen:
Construction of Perspective It is now a matter of looking at the plans and the lines you have projected down into the G.L and E.L.L area and construct your box with a lid
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step fourteen:
Final touches to drawing If you are certain you have completed the drawing correctly, now you can add in your line weight. (e.g detail line (medium weight) and out line (darker line)
P.P
V.P
V.P
E.L.L
S.P
Height line
G.L
Step fifteen: