The document lists different piping classes with their corresponding pipe material identifiers. The pipe material identifiers indicate the pipe's material type, grade, pressure class, and system type. For example, CB1A uses carbon steel of ASTM A53 Gr. B grade with a pressure class of 150 and is designated type A, which specifies its end connection type, corrosion allowance, and design conditions as defined in section 7 and individual piping class datasheets.
The document lists different piping classes with their corresponding pipe material identifiers. The pipe material identifiers indicate the pipe's material type, grade, pressure class, and system type. For example, CB1A uses carbon steel of ASTM A53 Gr. B grade with a pressure class of 150 and is designated type A, which specifies its end connection type, corrosion allowance, and design conditions as defined in section 7 and individual piping class datasheets.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
The document lists different piping classes with their corresponding pipe material identifiers. The pipe material identifiers indicate the pipe's material type, grade, pressure class, and system type. For example, CB1A uses carbon steel of ASTM A53 Gr. B grade with a pressure class of 150 and is designated type A, which specifies its end connection type, corrosion allowance, and design conditions as defined in section 7 and individual piping class datasheets.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
PIPING CLASS CB1A CB1E CB7A PH1A SF1E PB7A PH1B CN7A
PIPE MATERIAL IDENTIFIER
C (MATERIAL TYPE) CARBON STEEL CARBON STEEL CARBON STEEL NON METALIC STAINLESS STEEL NON METALIC NON METALIC CARBON STEEL B(MATERIAL GRADE) ASTM A53 Gr.B ASTM A53 Gr.B ASTM A53 Gr.B HDPE 316L (UNS S31603) PVC HDPE AS 1594 HU250 1(PRESSURE CLASS LIMIT) CLASS 150/TABLE E CLASS 150/TABLE E NON ANSI CLASS 150/TABLE E CLASS 150/TABLE E NON ANSI CLASS 150/TABLE E NON ANSI A (SYSTEM TYPE) Designation A to Z, as required to differentiate between piping material classes of the same base material type, material grade and class rating, but with a different end connection type, corrosion allowance, or design conditions. For example: CB1A: C: Carbon steel, B: ASTM A-53 Gr.B, 1: CL150, A: 1500kPag@100C butt weld/socket weld, raised face flanged, 1.5mm CA; CB1B: C: Carbon steel, B: ASTM A-53 Gr.B, 1: CL150, B: 1500kPag@100C Victaulic couplings/threaded, 1.5mm CA; CB1C: C: Carbon steel, B: ASTM A-53 Gr.B, 1: CL150, C: 800kPag@130C butt weld, socket weld, raised face flanged, 3.0mm CA. Refer to pipe class index in section 7 and individual piping class datasheets for design conditions and construction type.