Professional Documents
Culture Documents
Apsf (required surface area) = where Tu = force in N = 42833.33 t = resistant factor = 0.75 f'c = compressive strength of concrete = Apsf = L= Minimum length of embedment = 12 d =
32
N/sq.mm
PROVIDED LENGTH > 28.35 mm or 540 mm CHECK FOR TENSION As per ACI-318 Nsa = n Ase,N futa where Nsa = nominal stregth in tension in Newton n = nos. of bolts in a group. = 6 Ase,N = effective x-sectional area of a single bolt =
d2 4 = 1589.625 ( sq. mm) futa = not greater than 1.9 fya or 861.845 N/sq.mm(125000 psi) whichever is less fya = yield strenth of anchor steel in N/sq.mm = 250 Nsa = 4530.43 KN > 257 KN HENCE SAFE CHECK FOR SHEAR As per ACI-318 Vsa = n 0.6 Ase,V futa where Vsa = nominal stregth in shear in pounds n = nos. of bolts in a group. = 6 Ase,V = effective x-sectional area of a single bolt =
d2 4 = 1589.625 ( sq. mm) futa = not greater than 1.9 fya or 861.845 N/sq.mm(125000 psi) whichever is less fya = yield strenth of anchor steel in N/sq.mm = 250 Vsa = 2718.25875 KN > 733 KN HENCE SAFE CHECK FOR PULL OUT As per ACI-318 Npn = c,p Np where Npn = nominal pull out stregth in pounds c,p = modification factor = 1.4 and Np = 8 Abrg f'c where Abrg = net bearing area of bolt head(dia 2d) = = 32
d2 4 6358.5 N/sq.mm
( sq. mm)