Adjustable Heavy Duty Solid Forged Brass Shower Door
Hinges with Rounded Corners and Beveled Edges
Product Code Product Code Product Code
H-MBGTWA H-MBGTWA-OP H-MBGTWA-FP Wall Mount with Wall Mount with Wall Mount with Short Back Plate Offset Back Plate Full Back Plate
• Adjustable Feature Allows for Adjustment of Door
Closing Position After Installation • Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips Screws Available Upon Request) • Self-Centering 0˚ Return with Adjustment Up to 30˚ In or Out • Solid Forged Brass Construction Product Code Product Code H-MB135GTGA H-MB180GTGA • Precision Machined 300 Series Stainless Steel 135˚ Glass-to-Glass 180˚ Glass-to-Glass Components • Dual Precision Wound Stainless Steel Return Springs Adjustable Angle Instructions • Self-Closing from 25 Degrees Steps: • Non-Mouse Ear Design for Added Adjustment 1. Use 3mm Hex Wrench (A) to loosen two screws (B) by turning one circle counter-clockwise. Then proceed with the adjustment. • Designed for 3/8" and 1/2" (10 and 12 mm) Glass 2. Once you have aligned the door, re-tighten two screws (B). • Wall Mount Hinges Include Matching Finish Stainless Adjustment Angle Steel Mounting Screws • Allen Wrench Included B • Rated at 50 lbs (22.5 kg) per Hinge Outside 30˚ (Max.)
AVAILABLE IN ALL FINISHES, See Page 3
30˚ (Max.) Glass Door 3/8" Glass = RATED MAXIMUM MAXIMUM
A CAPACITY DOOR WEIGHT DOOR WIDTH Inside 5.05 lbs/sf (2.29 kg) 3 mm Hex Wrench 1/2" Glass = 2 Hinges 100 lbs (45 kg) 30" (762 mm) 6.40 lbs/sf (2.90 kg) 3 Hinges 150 lbs (68 kg) 36" (914 mm)
Note: Complete the above product codes by adding the desired finish code to the end.