Professional Documents
Culture Documents
) REGION, MUMBAI
SUPERINTENDING ENGINEER RAIGAD PUBLIC WORKS CIRCLE, KONKAN BHAVAN, NAVI MUMBAI.
Price Rs.700/-
All rights reserved, No Part of this publication may be reproduced, or transmitted, in any form or by any means, without the prior permission in writing.
SCHEDULE OF RATES
INDEX
SR. NO.
1 2
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21
BUILDING WORKS
Bd - A Excavation Bd - B Pile Foundation Bd - C Structural Steel Work Bd - E Plain Cement Concrete Bd - F Reinforced Cement Concrete Bd - G Brick Masonry Bd - H Stone Masonry Bd - I Block Masonry Bd - J Water Proofing Bd - K Expansion Joints Bd - L Plastering & Pointing Bd - M Paving, Flooring & Dado Bd - N Wood Finishes Bd - O Oil Painting Bd - P Colour / white washing & Distempering Bd - Q Wood Work Bd - R Roofing & Ceiling Bd - T Doors & Windows, Ventilators & Partitions Bd - U Iron Works Bd - V Water Supply & Sanitary Fittings Bd - W Miscellaneous 7 9 13 15 17 22 24 26 27 30 31 35 44 46 49 51 55 60 85 86 105 8 12 14 16 21 23 25 26 29 30 34 43 45 48 50 54 59 84 85 104 116
SR. NO. 3 3.1 3.2 3.3 3.4 3.5 3.6 4 4.1 4.2 4.3 5 6 7 7.1 7.2 8 9
CLASSIFICATION OF ITEMS
ROAD WORK
Rd - Road Earth Work Rd - Road W.B.M. Surfacing Rd - Road Asphalt Surfacing Rd - Road Painting Rd - Road Furniture Rd - Road Miscellaneus Work 117 121 125 132 134 137 120 125 131 134 137 140
BRIDGE WORK
Br - Bridge Foundation Br - Bridge Sub-Structure Br - Bridge Super-Structure 141 154 159 169 173 153 159 168 172 175
10 11 12 13 14 15
Rates For Transportation Labour Rates Material Rates Annexure A (Pipe) Abbreviations Material consumption
GENERAL NOTES
0.01 0.02 Schedule of Rates prepared for the year 2012-2013 operative from 1/10 /2012 and is applicable for Raigad District. For the rates in Jail premises and Corporation areas an increase of percentage over the normal schedule of rate prescribed for the year 2012-2013 is allowed as follows :1) Jail Premises 2) Corporation Areas 3) Bridge work in costal area, marshi land, creek, sensitive area in Raigad Tribal Area in Raigad Dist. 4) District. Note-1 15% 5% 15% extra shall be added to item rates only. extra shall be added to item rates only. extra shall be added to item rates only.
10%
The increase in rates as above should be applicable only one at a time e.g.If Jail and Mental Hospital premises falls in Corporation area, an increase of only 15% is to be considered and not 20% (i.e. 5% + 15%). The above percentage should be applied on the cost of items after deducting the cost of materials as stated below. Prior permission of Superintending Engineer Raigad Public Work circle, Konkan Bhavan, Navi Mumbai for item NO.3 above is necessary..
Schedule of Rates is based on the following basic rates of materialsRate for following materials are at Ex. PWD store.
i) Cement ii) T.M.T. bars iii) Structural Steel iv) Prestressed steel 12.7 mm. v) Prestressed steel 15.2 mm. Vi) Bitumen in bulk - 60/70 vii) Bitumen in bulk - 80/100 viii) Crumb Rubber Modified Bitumen CRMB - 55 ix) Pack Bit.30/40 x) Pack Bit.60/70 xi) Pack Bit.80/100 Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs.6,500/- Per M.T. Rs.48,800/- Per M.T. Rs.49,400/- Per M.T. Rs.59,500/- Per M.T. Rs.60,700/- Per M.T. Rs.45,500/- Per M.T. Rs.44,400/- Per M.T. Rs.44,800/- Per M.T. Rs.52,700/- Per M.T. Rs.49,500/- Per M.T. Rs.48,400/- Per M.T.
a) The rates of Bulk bitumen, CRMB & PMB for the items of bitumenious works are based
on the rates prevailing from H.P.C.L. These rates are inclusive of all taxes. Subsequent increase/decrease, if any, in these rates shall be accounted for in the analysis of items, while framing estimates.
b) While preparing the estimates, the above rates may be treated as basic rates and if any
change is noted, all calculations should be done accordingly.
c) VAT is included in all basic rates of material rates as per finance dept. Mantralaya
Mumbai 400 032 circular dated 30/09/2006
d) Since the basic rates of materials adopted while preparing the Rate Abstract of items
are as per market rates,which include VAT and other taxes, no separate provision is required to be made in the DSR items i.e.rates considered in the DSR are inclusive of VAT. e) Rates for completed items are based on a minimum initial lead of 5 Km. Actual lead charges for lead beyond 5 Km. shall be added while framing the estimate. 0.04 Basic Rates of Rubble, Khandkies, Metal, Murum, Sand, Aggregates, Bricks, Earth for embankment filling, considered in this schedule are exclusive of Royalty charges, however
x xh G. x M G.MJx 10/2009/|.G.309/J j, < 400 032 n.11/02/2010 And it is non refundable as per Government of Maharashtra, P.W.
for completed items Royalty charges are considered as per 0.05 Deptt's circular No. Misc./112002/194/Plan-3 dated 6.6.2003.The agency shall bear Royalty charges toprocurement be paid to Revenue Dept. storage of water for construction purpose, For cost towards and temporary provision of 1% in the rate analysis is made. In difficult situation where water is not available in reasonable lead or where water charges are essentially required to be paid to local authorities etc., the assessment of cost of procurement of water for construction may be made on factual data. If this cost of procurement of water required for construction is more than 1%, then for additional cost (i.e. more than 1%) seperate provision should be made in the estimate. The completed item rates are inclusive of 1% Labour insurance & 0.5 % Labour cess with amenity charges as per Govt. Circular.. Quality control testing charges considered in the rate analysis are 0.50%. As per P.W.D. Marathi letter No Eh-2010/|.G.118/i--2
0.11
0.12
0.13
The rates for items pertaining to Parks and Gardens, shall be taken from the C.S.R. of Superintendent, Parks and Gardens, Mumbai. While calculating part rate or reduced rate etc., necessary overhead charges, sundries etc. should be proportionately considered as per rate abstract. References of P.W.D. standard specification,and M.O.R.T. & H. specification current are obligatory. This schedule of rates is applicable to all building works , road works, bridges, culverts and or any civil engineering works carried out by all agencies in areas of Raigad District. The Head load is to be considered while preparing detailed rate analysis for inaccessible area where shifting of materials by head load is necessary. The rates of excavation items for building & C.D. works are inclusive of normal manual dewatering. If pumping is required additional item for dewatering shall be introduced while framing the estimate, on BHP basis with prior permission of S.E. The detailed rate analyasis shall be prepared for works of Matheran Hill Station, Raigad Fort and Gharapuri Island, the same shall be got approved from the concemed Superintending Engineer The incresed in rate for tribal area is to be used only for the village identified by tribal development deptt.
0.20
0.21
BUILDING WORKS :For all completed items initial lead up to 5.00 km. is considered. 0.22 a) The floor is designated by the space contained between the virgin slabs of b) floors. The D.S.R. rates of items are applicable for ground floor and first floor work. For c)
every addtional floor, percentage increase in rates shall be 1% per floor. The above increase is applicable for items and specification shown below. Sr.No. 1 2 3 4 5 6 7 8 9 Specifica tion Bd.C Bd.F-G-H Bd.L Bd.M Bd.O Bd.R Bd.T Bd.V Bd.W
Item
Structural Steel Work, Tubular trusses. R.C.C. Mild steel, Tor steel reinforcement, Brick Masonry, Stone Masonry, Hume Pipe tanks. External Plastering and Pointing. Flooring, Dado, Skirting, Treads (except white glazed, ceramic and marble tiles) External Painting Manglore Tiles roof, ridge, ceilings Weather sheds, Replacing external window shutters using scaffolding. Soil, Waste, Vent and Rain water pipes and mild steel tanks. External Guniting.
d) For the items required to be carried out in the respective floors other than those
mentioned above, the following average percentage shall be applied. Floor percentage by which rate is to be increased Ground & First Nil Second 0.35% Third 0.70% Fourth 1.05% Add 0.35% for further each additional floor 3
Example : For a work to be done on sixth floor the percentage shall be increased as given below . Percentage by which for 4th floor 1.05% rates to be increased for for 5th floor 0.35% sixth floor for 6th floor 0.35% Total 1.75% Note : The increases in rates as above shall be on DSR item rates only. The percentage increase to be applied for items like water proofing treatment, e) storage tank, parapet wall with coping, stair case, Liftroom with slab and water proofing treatment, plastering, painting to be carried out in the terrace will be at the rate of floor situated just below. For Rates of excavation items as per standard specification of Bd-A charges f) for additional lift above 1.50 m. shall be added as below. i) Lift above 1.50 mtr. upto 3.00 mtr. Rs. 12.00 /cum. Rs. 18.00 /cum. Rs. 23.00 /cum. ii) Lift above 3.00 mtr. upto 4.50 mtr. iii) Lift above 4.50 mtr. upto 6.00 mtr. 0.23
ROAD WORK, BRIDGES AND C.D. WORKS :For framing the various rates in D.S.R. following leads are considered unless otherwise specifically mentioned in the items -
a) b) c) d)
For items of supplying stone metal, .- Initial lead 50 meters. Rubble (15cm. to 23cm.) Supplying soft/Hard murum & earth .- Initial lead 50 meters. for embankment For Bituminious construction works no lead for asphalt and 5.00 km. initial lead for metal/aggregates is considered.
0.24 0.25
For all items of cement concrete, plain or reinforced cement concrete, stone masonary the initial lead for metal, sand, stone, cement & steel is considered as 5.00 km. For working out items of additional leads more than 5.00 km., the estimate e) shluld be prepared for actual leads by deducting initial lead charges of 5.00 km. for all completed items. For E.G.S. works like earthwork in embankment, Items following the specifications mentioned in Rd-13 Page No.194 shall invariably be used while framing the estimate. The D.S.R. rates for bridge items are for works in normal conditions of site. a) Wherever bridges are to be constructed in special site conditions such as bridge on creek having tidal effects/in standing water of perennial river, the detailed rate analysis shall be prepared and the same shall be got approved from the concerned Superintending Engineer.
b)
Rates for excavation for Bridges/C.D. Works/Sakav are considered for initial lift of 1.50 mtr., and charges for additional lift above 1.50 mtr. shall be added as below. i) Lift above 1.50 mtr. upto 3.00 mtr. ii) Lift above 3.00 mtr. upto 4.50 mtr. iii) Lift above 4.50 mtr. upto 6.00 mtr. Rs. 12.00 / cum Rs. 18.00 / cum Rs. 23.00 / cum
c)
The rates of supplying R.C.C. pipes at site of work shall be adopted as per MSSIDC rate contract, plus 10% overhead charges while Framing the of estimates. 4
0.26
CONCRETE ITEMS
The grade of reinforced cement concrete should be as per Govt. Circular No. RMR1094/184/R-1 Dated 12-6-1996 for Bridges. In case of buildings IS-456-2000 should be followed.Appropriate grade of concrete is specified for different exposure. Condition Mix design shall be done as per requirement of IS 456-2000 for Building,& IRC-21-2000,for Bridges .
0.27
TRANSPORTATION CHARGES : Lead charges for various material given in statement C 1, are inclusive of a)
loading, unloading & over head charges, hence these charges should not be added seperately.
b)
c)
Lead charges are given in the statement C-1 for major items such as lime, murum, earth, building rubble, sand, stone aggregate, soling stone, concrete blocks, timber, cement, steel, bulk asphalt, bricks, Roofing tiles, all types of flooring, R.C.C. pipes etc. Statement C-2 is for loading, unloading and stacking charges.
D.S.R. APPROVED VIDE SUPERINTENDING ENGINEER, RAIGAD PUBLIC WORK CIRCLE, LETTER NO.DB/ RPWC/ DSR /2012-13 / 5966 DATE 28/09/2012 OPERATIVE FROM 1/10/2012 AND VALID UP TO 30/06/2013 APPROVED FOR THE YEAR 2012 - 2013.
N. T. PATIL
B.P.RANGARI
S.G.JADHAV
BLANK
Bd - A : Excavation
Item No.& Item code 1 Description of Items / Specification No. Excavation for foundation in___ including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling, ramming, watering, shoring and strutting etc. complete. as directed. Spec. No.: Bd-A 1 to 3 Page No. 259 Lift upto 1.50 metres. Bd. A-1 Bd. A-2 Bd. A-3 2 a) b) c) earth, soils of all types, sand gravel and soft murum hard murum hard murum with boulders Cu. M. Cu. M. Cu. M. 130.00 150.00 171.00 122.00 143.00 160.00 Unit Rate for 12-13 (in Rs.) Completed Labour
Excavation for foundation in ____ / old cement / lime masonry foundation including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking, necessary dewatering unless provided elsewhere, preparing the bed for the foundation and required backfilling with available earth / murum, ramming, watering etc. complete. as directed excluding shoring and strutting. Spec. No.: Bd-A 4 to 5 Page No. 259,BdA 6 to 7 Lift upto 1.50 metres.
a) b) c) d)
Soft rock hard rock by blasting hard rock by chiseling wedging laterite rock soft or hard
Bd. A-10
Filling in plinth and floors with approved excavated materials in 15cm to 20cm layers including watering and compaction etc. complete. Spec. No.: Bd-A 10 Page No. 262 Cu. M.
56.00
51.00
Description of Items / Specification No. Filling in plinth and floors with contractor's murum in 15 cm to 20 cm layers including watering, compaction etc. complete. Spec. No.: Bd-A 11 Page No. 263 Providing soling using 80mm size trap metal in layers of 15 cm each including filling voids with sand, ramming, watering etc. complete. Spec. No.: Bd-A 12 Page No. 264 Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Spec.No.: Bd- A-12/Page No- 264 Providing and filling in the foundation with sand of approved quality including watering, compaction etc. complete. Spec. No.:Bd-A 13 Page No. 264 Dewatering the excavated trenches and pools of water in the building area by using pumps and other devices, including disposing of the water to a safe distance as directed. Spec. No.:Bd-A 9 Page No. 261 a) b) c) By using 3 H.P. pumps By using 5 to 9 H.P. Pumps By using 10 to 19 H.P. Pumps
Unit
Bd. A-11 5
Cu. M.
250.00
51.00
Bd. A-12 6
Cu. M.
788.00
141.00
Bd. A-12 7
Cu. M.
616.00
145.00
Bd. A-13 8
Cu. M.
--
--
Bd. A-9
Deleted
8
Bd - B : Pile Foundation
Item No.& Item code 1 Description of Items / Specification No. Providing M-25 R.C.C. cast in situ bored piles of-------- using minimum cement quantity at the rate of 300 Kg. per cum, each of load-capacity as per design and of specified diameter or as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement, including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell etc. complete including chipping, dressing of R.C.C. piles cleaning the reinforcement etc. complete. Spec. No.:Bd-B -4 Page No. 270 i) ii) iii) iv) v) vi) vii) viii) ix) x) xi) xii) xiii) xiv) xv) xvi) 325 mm diameter 350 mm diameter 400 mm diameter 450 mm diameter 475 mm diameter 500 mm diameter 525 mm diameter 550 mm diameter 600 mm diameter 625 mm diameter 650 mm diameter 750 mm diameter 800 mm diameter 825 mm diameter 900 mm diameter 975 mm diameter R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. Unit Rate for 12-13 (in Rs.) Completed Labour
Bd. B- 4
1018.00 1043.00 1219.00 1302.00 1484.00 1586.00 1696.00 1792.00 2001.00 2204.00 2240.00 2628.00 2925.00 3057.00 3893.00 4438.00 4684.00 5096.00
291.00 301.00 321.00 344.00 357.00 372.00 384.00 400.00 433.00 447.00 465.00 542.00 586.00 608.00 641.00 758.00 785.00 841.00
Description of Items / Specification No. Providing M-30 R.C.C. cast in situ bored piles of-------- each of load-capacity as per design and of specified diameter or as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement, including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell including chippings, dressing of R.C.C. piles cleaning the reinforcement etc. complete. Spec. No.:B-dB -4 Page No. 270 i) ii) iii) iv) v) vi) vii) viii) ix) x) xi) xii) xiii) xiv) xv) xvi) 325 mm diameter 350 mm diameter 400 mm diameter 450 mm diameter 475 mm diameter 500 mm diameter 525 mm diameter 550 mm diameter 600 mm diameter 625 mm diameter 650 mm diameter 750 mm diameter 800 mm diameter 825 mm diameter 900 mm diameter 975 mm diameter
Unit
Bd. B- 4
R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M. R. M.
1036.00 1099.00 1263.00 1537.00 1562.00 1634.00 1780.00 1911.00 2133.00 2378.00 2509.00 3037.00 3270.00 3287.00 4003.00 4741.00 4994.00 5738.00
291.00 301.00 321.00 344.00 357.00 372.00 384.00 400.00 433.00 447.00 465.00 542.00 586.00 629.00 679.00 758.00 785.00 841.00
xvii) 1000 mm diameter xviii) 1050 mm diameter 3 Providing & Placing cement concrete M-25 for R.C.C. cast in situ bored piles using termie arrangement including compaction, curing etc. complete. Spec. Bd- B-4 Page No. 270
Bd.B-4
Cu.M.
--
--
10
Description of Items / Specification No. Chipping and dressing of the R.C.C. piles upto 0.60m. including cleaning reinforcement and removal of dismantled materials for providing pile caps etc. complete. Spec. As directed by Engineer-In-Charge. Providing bentonite slurry process for --------diameter of piles etc. complete. Spec. As directed by Engineer-In-Charge. a) b) upto 650 mm. Diameter above 650 mm. Diameter
Unit
No.
114.00
144.00
R. M. R. M.
Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position upto 400 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete.
Deleted
Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position above 400 mm to 550 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete.
41181.00
8236.00
Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position above 550 mm to 650 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete. Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position above 650 mm to 750 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete.
49871.00
9971.00
58965.00 11793.00
11
Unit
Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position above 750 mm to 825 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete. Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position above 825 mm to 900 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete.
72863.00 14572.00
11
81957.00 16391.00
12
Carrying out load test for 1.5 times the proposed Number safe working load on the pile in driven position above 900 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std. Specifications and dismantling the cap etc. cand cleaning the site complete.
100939.00 20188.00
12
Deleted
Bd. C- 2 2
M.T.
60560.00
6050.00
Bd. C- 3 3
Providing and fabricating structural steel work in rolled sections fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed design and drawings or as directed by Engineer-In-Charge. including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint followed by two coats of oil painting of approved quality and shade etc. complete. Spec. No.:BdC -3 Page No. 275 Providing structural steel work in single stanchions composed of R.S.J. channel etc. with caps bases, mild steel plates, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed design and drawings or as directed, including cutting fabrication, hoisting, erecting & fixing in position, making riveted/bolted/ welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No.:Bd-C -6 Page No. 277
M.T.
59999.00
3600.00
Bd. C- 6
M.T.
59226.00
4146.00
13
Description of Items / Specification No. Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed design and drawings or as directed by Engineer-In-Charge., including cutting, fabricating, hoisting, erecting fixing in position, making riveted/bolted/welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No.:BdC -8 Page No. 278 Providing Gas or Electrical Welding as per IS std. for structural steel sections, plates as per detailed drawing for less than 10 mm thick section etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Bd. C- 8 5
M.T.
78200.00
9665.00
CM
4.40
1.10
Providing and fixing 50 millimeter diameter heavy type galvanized iron pipe (IS Std.) gate of approved drawing with all fixtures and fitting in two leaves with strong hold fast embedded in cement concrete block at top and bottom with locking arrangement including cutting, bending, main holes and with one coat of primer etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M.. 2875.00 885.00
Providing and fixing stainless steel of S.S. 316 quality for railing with steel hand rail pipe of 50.80 mm dia of 18 gauge thickness witth steel pipe of 50.80 mm dia for vertical post @ 1.20 metre centre to centre with bottom 75 mm dia plates fixed on flooring with proper anchoring and middle horizontal steel pipe rails of 15.87 mm dia of 18 gauge thickness @ 150 mm centre to centre between top rail and flooring and fixing the pipe to vertical post by steel adoptors including finishing, grinding, gloossy polish fabrication and fixing as per approved drawing and over all weight of steel railing shall not be less than 7.5 kg per square meter etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M.. 5185.00 976.00
14
Bd. E -1
Deleted
a) b) c) d) e) 2
Bd. E -2
Providing and casting in situ cement concrete ___ of trap metal for steps, including formwork, compacting, roughening the exposed faces if special finish is to be provided and curing etc. complete. Spec. No.:Bd-E -2 Page No. 288 a) b) M-15 M-20 Cu. M. Cu. M. 4433.00 4974.00 461.00 461.00
Bd. E -3
Providing and casting in situ cement concrete ____ of trap metal for coping to plinth or parapet, moulded or chamfered as per drawings or As directed by Engineer-In-Charge., roughening the exposed faces if special finish is to be provided and curing etc. complete. Spec. No.:BdE -3 Page No. 288 a) b) M-15 M-20 Cu. M. Cu. M. 4816.00 5566.00 532.00 532.00
Providing and casting in situ cement concrete ____ of trap metal for bed block, foundation blocks and such other items, including bailing out water manually, formwork, compacting, roughening the exposed faces if specials finish is to be provided and curing etc. complete. Spec. No.:BdE -4 Page No. 289 a) b) M-15 M-20 Cu. M. Cu. M. 4948.00 4974.00 484.00 558.00
Bd. E -4
15
Description of Items / Specification No. Providing and casting in situ cement concrete ____ of trap metal for plain or moulded sills, cornice jambs, block in course or architraves of required size and shape, including centering, formwork compacting, roughening the exposed faces if special finish is to be provided and curing etc. complete. Spec. No.:Bd-E -5 Page No. 290 a) b) M-15 M-20
Unit
Bd. E -5
Cu. M. Cu. M.
4512.00 5014.00
461.00 461.00
16
Deleted
Bd. F -1
a) b) c) 2
Bd. F -3
Providing and casting in situ cement concrete ____ of trap metal for R.C.C.. work like raft, grillage, strip, foundations and footing of R.C.C. Columns and steel stanchions, including bailing out water manually, centering, formwork, compacting, finishing and curing etc. complete. (Excluding steel reinforcement) Spec. No.:Bd-F -3 Page No. 298 a) b) c) M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 4513.00 4622.00 4726.00 661.00 695.00 695.00
Bd. F -4
Providing and casting in situ cement concrete ____ of trap metal for R.C.C. columns as per detailed designs and drawings or As directed by Engineer-InCharge., including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) Spec. No.:Bd-F -4 Page No. 298 a) b) c) M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 5860.00 5928.00 6030.00 1040.00 1040.00 1040.00
17
Description of Items / Specification No. Providing and casting in situ cement concrete ____ of trap metal for R.C.C. Beams and Lintels as per detailed drawings and designs or as directed by Engineer-In-Charge., including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement.) Spec. No.:Bd-F -6 Page No. 300 a) b) c) M-20 M-25 M-30
Unit
Bd. F -6
Providing and casting in situ cement concrete _____ of trap metal for R.C.C. Slabs and landings of all thickness as per detailed drawings and designs, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) Spec. No.:BdF -8 Page No. 302 a) b) c) M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 5976.00 7254.00 7321.00 1368.00 1368.00 1368.00
Bd. F -8
Providing and casting in situ cement concrete _____ of trap metal for R.C.C. chhajja as per detailed designs and drawings, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) Spec. No.:Bd-F -9 Page No. 303 a) b) c) M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 6985.00 7086.00 7153.00 1368.00 1368.00 1368.00
Bd. F -9
18
Unit
Providing and casting in situ cement concrete ___ of trap metal for R.C.C. canopy as per detailed designs and drawings, including centering, formwork, compacting roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement). Bd. F -10 Spec. No.:Bd-F -10 Page No. 304 a) b) c) 8 M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 7185.00 7293.00 7360.00 1395.00 1395.00 1395.00
Providing and casting in situ cement concrete ____ of trap metal for R.C.C. waist slabs, steps and parapet as per detailed drawings for staircases, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement)
Bd. F -13 Spec. No.:Bd-F -13 Page No. 305 a) b) c) 9 M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 6316.00 6390.00 6461.00 1174.00 1174.00 1174.00
Providing and casting in situ cement concrete ____ of trap metal for R.C.C. pardi 75mm thick, including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement)
Bd. F -11 Spec. No.:Bd-F -11 Page No. 304 a) b) c) M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 7383.00 7608.00 7681.00 1504.00 1504.00 1504.00
19
Description of Items / Specification No. Providing and casting in situ cement concrete ___ of trap metal for R.C.C. fins 65 mm thick in position as shown in drawings or as directed by Engineer-InCharge, including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement)
Unit
Bd. F -16 Spec. No.:Bd-F -16 Page No. 306 a) b) c) 11 M-20 M-25 M-30 Cu. M. Cu. M. Cu. M. 7680.00 8015.00 8611.00 1678.00 1678.00 1678.00
Providing and fixing in position steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. M.T. M.T. M.T. 57000.00 60000.00 61800.00 4012.00 4012.00 4012.00
Bd. F -17 Spec. No.:Bd-F -17 Page No. 306 a) Mild Steel b) HYSD Fe - 415 c) TMT - 500 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforcment jali 50 mm. thick, of approved design, cement mortar 1:3 and curing complete (including mild steel bar reinforcement). Bd. F -20 Spec. No.:Bd-F -20 Page No. 307 13 12
Sq.M.
595.00
53.00
Providing and placing PVC cover block of required size at the rate of 27 Nos. per 10 Square Metre to reinforcement to give a clear cover as per I.S.4562000 in R.C.C. slabs. (Unit of this item is for volume of concrete ) Spec. As directed by Engineer-In-Charge. Cu. M.
47.00
9.00
20
Unit
Providing and placing in position PVC cover blocks of required size at 90cm centre to centre to each main bottom bars and to stirrups at sides to give required clear cover from all sides as per I.S.4562000 in R.C.C. beams etc. complete. (Unit of this item is for volume of concrete) Spec. As directed by Engineer-In-Charge. Cu. M. Providing and placing PVC cover blocks of required size at 1.50 metres centre to centre near the edge of each side and at cente when the width is more than 75 cm to reinforcement to give a clean cover of 40 mm to 65 mm from all sides as per I.S.456-2000 in R.C.C. columns etc. complete. (Unit of this item is for volume of concrete ) Spec. As directed by Engineer-In-Charge. Cu. M.
91.00
9.00
15
83.00
14.00
Deleted
21
Bd - G : Brick Masonry
Item No.& Item code 1 Description of Items / Specification No. Providing Second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls & external walls, including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering etc. complete. Unit Rate for 12-13 (in Rs.) Completed Labour
Deleted
Bd. G -1 2
Spec. No.:Bd-G -1 Page No. 313 Providing Second Class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure, including striking joints, racking out joints, watering and scaffolding etc. complete. Spec. No.:Bd-G -5 Page No. 315 Providing Second Class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter / 2 hoop iron strips 25mm x 1.6 mm painted with anticorrosive paint at every third course properly bent and bonded at ends, scaffolding, racking out joints and watering etc. complete. Spec. No.:BdG -7 Page No. 316
Cu. M.
3780.00
726.00
Bd. G -5 3
Cu. M.
3990.00
882.00
Bd. G -7 4
Sq. M.
492.00
85.00
Providing Second class Burnt Brick masonry with conventional/I.S.. type bricks in cement mortar 1:4 including scaffolding, raking out joints and watering and pillars of shapes as shown in the drawings etc. complete. Bd. G -10 Spec. No.:Bd-G -10 Page No. 318 a) Rectangular or square, b) Curved, Cu. M. Cu. M. 4008.00 4756.00 971.00 1262.00
22
Description of Items / Specification No. Providing Second class Burnt Brick masonry in cement mortar 1:6 using flyash bricks in foundations and plinth of inner walls & external walls, including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. Spec. Bd-.G1 page 313
Unit
Bd. G 1 6
Cu. M.
3865.00
649.00
Bd. G5 7
Providing Second class Burnt Brick masonry in cement mortar 1:6 using flyash bricks in superstructure including striking joints racking out joints watering and scaffolding complete. Bd-G5 page 315 Cu. M. Providing Second class Burnt Brick masonry in cement mortar 1:4 using flyash bricks in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter /2 hoop iron strips 25mm x 1.6mm at every third course, properly bent and bounded at ends scaffolding racking out joints and watering complete. Spec. Bd.G7 page 316
4168.00
767.00
Bd. G7 8
Sq. M
560.00
89.00
Providing Second class Burnt Brick masonry in cement mortar 1:4 using flyash bricks including scaffolding raking joints and watering in pillar of -------------- as shown in the drawing. Bd. G10 - Spec. Bd.G10 page 318 a) Rectangular or square, b) Curved, Cu. M. Cu. M. 4110.00 4853.00 930.00 1210.00
23
Bd - H : Stone Masonry
Item No.& Item code 1 Description of Items / Specification No. Providing uncoarsed rubble masonry of trap stones in cement mortar 1:6 in foundation and plinth of inner wall, including bailing out water manually, striking joints on unexposed faces and watering etc. complete. Unit Rate for 12-13 (in Rs.) Completed Labour
Deleted
Cu. M.
2670.00
793.00
Providing uncoarsed rubble masonry of trap stones in cement mortar 1:6 in superstructure, including racking out joints when plastering is to be done / striking out joints, watering and scaffolding etc. complete. Bd. H. -4 Spec. No.:Bd-H. -4 Page No. 331 Cu. M. Providing coursed rubble 2nd sort masonry using all stones of full height in each course of trap stones in cement mortar 1:6 in external walls of plinth, including striking joints, raking out joints, watering etc. complete. Bd. H. -11 Spec. No.:Bd-H. -11 Page No. 333 Cu. M. 4 Providing coursed rubble 2nd sort masonry using all stones of full height in each course of trap stones in cement mortar 1:6 in superstructure, including racking out joints when plastering is to be done / striking out joints, watering and scaffolding etc. complete. Cu. M. 3
2881.00
900.00
4809.00
1282.00
Bd. H. -12 Spec. No.:Bd-H. -12 Page No. 333 5 Providing coursed rubble masonry 1st sort of trap stones in cement mortar 1:6 in super structure including raking out joints on the inside when plastering is to be done scaffolding etc. complete.
5196.00
1319.00
Bd. H. -14 Spec. No.:BdH. -14 Page No. 333 to 334 6 Providing coursed rubble masonry 1st sort for pillar of trap stones in cement mortar 1:6 including pointing with cement mortar 1:3 scaffolding and watering etc. complete.
Cu. M.
4417.00
1532.00
Cu. M.
4505.00
1553.00
Description of Items / Specification No. Providing random rubble masonry 2nd sort of trap stones in cement mortar 1:6 in superstructure, raking out joints when no pointing or plastering is to be done on the inside, watering and scaffolding etc. complete.
Unit
Cu. M.
2559.00
1267.00
25
Bd - I : Block Masonry
Item No.& Item code 1 Description of Items / Specification No. Unit Rate for 12-13 (in Rs.) Completed Labour
Bd. I. -1 2
Providing and laying I.S. standard cement concrete hollow block 100 x 200 x 400 mm in cement mortar 1:6 for superstructure including raking out joints, when plastering is to be done/striking joints when no plastering is to be done, curing and scaffolding etc. complete. Spec. No.:Bd-I. -1 Page No.349 Sq. M.
Deleted
427.00
133.00
Providing and laying I.S.. standard cement concrete hollow block 200 x 200 x 400 mm in cement mortar 1:6 for superstructure including raking out joints, when plastering is to be done/striking joints when no plastering is to be done curing and scaffolding etc. complete. Spec. No.:BdI. -1 Page No.349 Providing and constructing 1:5:8 cement concrete solid block 300 x 200 x 150 mm in cement mortar 1:6 for external block masonry, raking out joints, when plastering is to be done/striking joints when no plastering is to be done, curing and scaffolding etc. complete. Spec. No.:Bd-I. -1 Page No.349 Providing and constructing 100 mm thick Siporex block partition in cement mortar 1:4 having mortar joint 6 mm thick including scaffolding curing etc. complete. Spec. No.:Bd-I. -1 Page No.349 Sq. M. 558.00 51.00 Sq. M. 1021.00 179.00 Sq. M. 864.00 202.00
Bd. I. -1 3
Bd. I. -1 4
Bd. I. -1
26
Bd - J : Water Proofing
Item No.& Item code 1 Description of Items / Specification No. Unit Rate for 12-13 (in Rs.) Completed Labour
Bd. J. -2 2 Bd. J. -2 3
Providing and laying damp-proof course 50mm thick M-20 cement concrete layer and bitumen using cement with approved water proofing compound at the rate of 1 kg per 50 kg of cement Spec. No.:BdJ. -2 Page No.355 Sq. M.
Deleted
267.00
37.00
Providing and laying damp proof course 50mm thick of Shahabad Stone and bitumen etc. complete. Spec. No.:BdJ. -2 Page No.355 Providing and applying bitumen layer at 2kg/square metre over terrace structural slab including cleaning the surface for water proofing etc. complete. Spec. No.:BdJ. -3 Page No.356 Sq. M. 120.00 15.00 Finishing the terrace slab integrally mixed with water proofing compound in cement mortar 1:3 proportion with 20 mm thick layer, including curing, finishing using approved water proofing compound at rate of 1 kg per 50 kg of cement etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. Providing and laying water proofing treatment of 112 mm average thickness consisting of 12 mm thick layer in cement mortar 1:3 with water proofing compound at the rate of one kilograme per bag of cement as base, constructing and laying brick bat coba in cement mortar 1:5 with waterproofing compound at the rate of one kilogramme per bag of cement and having average thickness of 80mm and finishing with 20 mm cement plaster layer in cement mortar 1:3 with approved water proofing compound at the rate of one kilogramme per cement bag, including all lead, lifts and laid to proper slope to drain off water entirely inlcuding watta at the junction of parapet and work upto a height of 30 cm or as directed and, including finishing the top layer of water proofing treatment with false marking of 30 x 30cm or as directed and covering the whole treatment with seven year's guarantee, on requisite stamp paper etc.complete. Spec. As directed by Engineer-In-Charge. 27 Sq. M. 559.00 155.00 Sq. M. 479.00 8.00
Bd. J. -3 4
139.00
49.00
Description of Items / Specification No. Providing leak proof treatment by injection grouting method to old floor without removing tiles of W.C../Bath with approved water proofing compound of IS standard and cement solution (fine sand, cement etc.) without breaking tiles making holes, refilling and making them water tight including making good the damages, cleaning etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Sq. M.
210.00
31.00
Removing existing water proofing treatment (all types) from terrace without damages to structure, leveling and cleaning the surface for providing new specialized water proofing treatment etc. complete as directed. Spec. As directed by Engineer-In-Charge. Sq. M. Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using approved waterproofing compound of IS Std. at the rate of one kg per 50 kg of cement etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. Providing waterproofing in W.C. and bath including brick bat coba in all positions consisting of specialized materials as per IS Standard and covering 7 years guarantee on requisite stamp paper including all leads, lifts etc. complete. Spec. As directed by Engineer-In-Charge. Cu. M.
92.00
81.00
276.00
130.00
2938.00
926.00
10
Providing waterproof bedding for flooring of bath and W.C. 25 mm thick in cement mortar 1:3 using 1 kg of approved waterproofing compound of IS Std. per 50 kg of cement, including leveling, curing etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. Providing water proofing by Polymerized water proofing compound to the virgin slab in 3 coats with 7 years guarantee on court fee stamp paper of Rs.100/- including materials and labour and ponding test etc. complete (with the permission of S. E.) Spec. As directed by Engineer-In-Charge. Sq. M.
304.00
141.00
11
--
--
28
Description of Items / Specification No. Providing water proofing treatment by Polymerized water proofing compound to the Water tank, W.C.. or toilet ducts in three coats with 7 years guarantee on court fee stamp paper of Rs.100/- including materials and labour and including ponding test etc. complete. (with the permission of S. E.) Spec. As directed by Engineer-In-Charge.
Unit
Sq. M.
459.00
43.00
13
Providing and applying Polysafe-EC for (Patent No.571) external walls, slopping R.C.C. roofs, in three coats to avoid water penetration, ultra-violet effects of Sun-rays, fungus development and to protect the reinforcement from corrosion in atmospheric effects. Cleaning the surface of concrete by brushing with solvent and applying Polysafe-EC chemical coating with primer and after 24 hour interval applying 1st coat, and after 24 hour interval applying second, third & final coat of approved shade, colour, avoid smoking while painting including necessary scaffolding etc. complete. (with the permission of S. E.) Spec. As directed by Engineer-In-Charge. Sq. M. Providing water proofing treatment as per IS 13461966 to generally inaccessible sloping R.C.C. terrace slab with bitumen fetts in all positions in five coarse consisting of applying cold bitumen primer coat at the rate of 2.50 litre/10 sq.m. hot bitumen layer at the rate of 14.50 kg/ 10 sq.m. and over the same layer of bitumen fett of type III grade as per IS 1332-1965 across slope with 10 cm overlap commencing at the lowest level and again applying hard bitumen coarse at the rate of 14.50 kg/10 sq m. and finally spreading over it grit at the rate of 14.50 kg / 10 sq.m. including all lifts. leads and scaffoldings whenever necessary complete as directed with five year guarantee etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M.
252.00
52.00
14
--
--
Deleted
29
Bd - K : Expansion Joints
Item No.& Item code 1 Description of Items / Specification No. Unit Rate for 12-13 (in Rs.) Completed Labour
Providing expansion joints in R.C.C. framed structure (interior columns) with plain premoulded bituminous filler 25 mm thick, including fixing C.C.T.W. battens both faces etc. complete as directed. Bd. K. -1A Spec. No.:BdK.-1A Page No.359 Sq. M.
Deleted
2180.00
191.00
Providing expansion joints in R.C.C. framed structure (exterior columns) with plain pre-moulded bituminous filler 25 mm thick and 3 mm thick aluminium plate, hold fast, fixing C.C.T.W.. battens on internal face, finishing etc. complete as directed. Sq. M. 3006.00 241.00
Bd. K. -1B Spec. No.:BdK.-1B Page No.359 3 Providing expansion joints in R.C.C. framed structure (at floor level) with pre-moulded bituminous filler 25mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing C.C.T.W.. battens on upper faces etc. complete as directed.
Bd. K. -1A Spec. No.:BdK.-1A Page No.359 4 Providing expansion joints in R.C.C. framed structure (at terrace level) with pre-moulded bituminous filler 25 mm thick and 3mm thick aluminium plate as required bituminous poured filler fixing lead flushing on upper side and C.C.T.W. battens and inner face finishing etc. complete as directed.
Sq. M.
3045.00
241.00
Bd. K. -1A Spec. No.:BdK.-1A Page No.359 5 Providing and fixing chicken mesh of 22 guage with about 35 cm. width at the junction of R.C.C. membes and brick work, of approved quality including fixing mesh in position by necessary nailing in concrete or B.B. masonry and tying by binding wire etc. complete. As directed by Engineer-in-charge.
Sq. M.
4103.00
361.00
Sq. M.
55.00
11.00
Deleted
30
Deleted
Bd. L. -1
Spec. No.:BdL.-1 Page No.367 a) b) in cement mortar 1:3 in cement mortar 1:4 Sq.M. . Sq.M. Sq.M.. 101.00 96.00 55.00 55.00
Providing internal cement plaster 12mm thick in a single coat, ______without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing etc. complete. Spec. No.:BdL.-2 Page No.367 a) b) c) in cement mortar 1:3 in cement mortar 1:4 in cement mortar 1:5 Sq. M. Sq.M. Sq.M.. Sq.M. Sq.M.. 154.00 140.00 132.00 67.00 67.00 67.00
Bd. L. -2
Providing internal cement plaster 20mm thick in a single coat, in cement mortar 1:3 without neeru finish to stone masonry and concrete members surface in all positions including scaffolding, racking out joints, providing groove at joints of stone masonry and concrete members and curing etc. complete. Spec. No.:BdL.-3 Page No.368 Providing internal cement plaster 20mm thick in two coat, ________ without neeru finish to brick masonry or concrete surface in all positions including scaffolding, racking out joints, providing groove at joints of stone masonry and concrete members and curing etc. complete. Spec. No.:BdL.-4 Page No.368 a) b) in cement mortar 1:4 in cement mortar 1:5 Sq. M. Sq. M. Sq.M.. 222.00 212.00 115.00 115.00 Sq. M. 203.00 86.00
Bd. L. -3 4
Bd. L. -4
31
Unit
Bd. L. -5 6
Providing cement plaster 25mm thick in two coat, in cement mortar 1:4 without neeru finish to concrete brick or stone surface in all positions including racking out joints, scaffolding and curing etc. complete. Spec. No.:BdL.-5 Page No.368 Sq. M. Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kilogramme / 50 kg of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8 mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete. Spec. No.:BdL.-7 Page No.369 Sq. M. Providing rough cast cement plaster externally in two coats to concrete / brick / stone masonry in all positions with base coat of 12 to 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1Kg / 50Kg.of cement and over it rough cast treatment 12 mm thick in proportion 1:11/2:3 including racking out joints, scaffolding and forteen days curing complete. Spec. No.:BdL.-8 Page No.370 Sq. M.
291.00
153.00
Bd. L. -7 7
386.00
196.00
Bd. L. -8 8
332.00
167.00
Bd. L. -9
Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete / brick / stone masonry in all positions with base coat of 12 to 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kg/50kg of cement and over it rough cast treatment 12 mm thick in proportion 1:11/2:3 including racking out joints, scaffolding and forteen days curing etc. complete. Spec. No.:BdL.-9 Page No.370 Sq. M.
367.00
167.00
32
Unit
Providing neeru finish to plaster surface in all position including scaffolding and curing etc. complete. Bd. L. -10 Spec. No.:BdL.-10 Page No.370 Sq. M. 10 Providing neeru finish to plaster surface for ceiling including scaffolding and curing etc. complete. (Only for repair work) Sq. M.
34.00
19.00
Bd. L. -10 Spec. No.:BdL.-10 Page No.370 11 Providing exterior stone-crete facing of approved colour and dressing with base coat of 12 to 15mm thick in cement mortar 1:3 using approved water proofing compound at the rate of 1 Kilogramme / 50 kg. of cement to brick/stone/concrete surface in all positions including final coat for stone-crete facing of thickness not less than 12 mm. in cement mortar 1:3 using coloured pigment including racking out joints, scaffolding and curing for fourteen days etc. complete.
79.00
27.00
Sq. M.
507.00
250.00
Providing flush grooved pointing with cement mortar 1:3 to brick masonry including scaffolding and curing etc. complete. Bd. L. -15 Spec. No.:BdL.-15 Page No.372 Sq. M. Providing flush grooved pointing with cement mortar 1:3 to stone masonry including scaffolding and curing etc. complete. Bd. L. -15 Spec. No.:BdL.-15 Page No.372 Sq. M. Providing tuck pointing with cement mortar 1:3 for stone/brick masonry including scaffolding and curing etc. complete. Bd. L. -16 Spec. No.:BdL.-16 Page No.373 Sq. M. 15 Providing weathered pointing with cement mortar 1:3 stone/brick masonry including scaffolding and curing etc. complete. Sq. M. 14 13
93.00
72.00
79.00
72.00
134.00
117.00
Bd. L. -17 Spec. No.:BdL.-17 Page No.373 16 Providing 'V' groove pointing with cement mortar 1:3 to stone masonry/brick masonry including scaffolding and curing etc. complete. Spec. No.:BdL.-18 Page No.373 33
129.00
104.00
Sq. M.
93.00
72.00
Deleted
Description of Items / Specification No. Providing internal cement plaster 12mm thick in a single coat in c.m.. 1:3 without neeru finish to brick surface including scaffolding and curing complete using Portland pozzolona cement and flyash.
Unit
Deleted
Bd. L. -2 18
Spec. No.:BdL.-2 Page No.367and IS1489 Providing internal cement plaster 20mm thick in a two coat in c.m.. 1:4 without neeru finish to brick suface including scaffolding and curing complete using Portland pozzolona cement and flyash. Spec. No.: BdL.-3 Page No.368and IS1489 Providing sand face plaster externally in two coats using approved screened sand in all positions, including preparing the surface, providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kilogramme / 50 kg of cement, curing the same for not less than two days, keeping the surface of base coat rough to receive the sand faced treatment 8 mm thick in cement mortar 1:4 and finishing the surface by taking out grains, curing for 14 days, scaffolding etc. complete, using Portland Pozzolana Cement & Flyash. Spec. No.: BdL.-7 Page No.369and IS1489
Sq. M.
134.00
67.00
Bd. L. -3 19
Sq. M.
180.00
86.00
Sq. M.
355.00
197.00
20
Providing and fixing chicken wire mesh (Reference IS 3150-1992) of 19 size of aperture at the junction of R.C.. Members and brick work, of approved quality including fixing mesh in position by necessary nailing \in conrete or / B.B. masonry and or tying by binding wire etc. complete. Spec. As directed by Engineer-in-charge. Sq. M. 386.00 200.00
21
Providing marble touch plaster to plastered surface 3 to 4mm thick surface of marble paste including providing primary coat with raw material such as putty, cement,with approved adhesive including 5 years gurantee period including cleaning the surface etc. complete. Spec. As directed by Engineer-in-charge. Sq. M. 430.00 26.00
34
Deleted
Bd. M. -1
Sq. M. Sq. M.
389.00 416.00
100.00 101.00
Bd. M. -1 3
Providing and laying rough Shahabad Stone Flooring 25mm to 30mm thick on a bed of sand including cement float, pointing in cement mortar 1:3, curing and cleaning etc. complete. Spec. No.:BdM.-1 Page No.379 Sq. M. Providing and laying in position polished Shahabad Stone flooring -------- of approved quality 25mm to 30mm thick in plain/diamond pattern on a bed of cement mortar 1:6 including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No.:BdM.-3 Page No.380 a) b) 30 cm. x 30 cm. 55 cm. x 55 cm. Sq. M. Sq. M.
349.00
93.00
Bd. M. -3
628.00 665.00
126.00 126.00
Bd. M. -3
Providing and laying in position polished Tandur Stone flooring ------- of approved quality 25mm to 30mm thick in plain/diamond pattern on a bed of cement mortar 1:6 including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No.:BdM.-3 Page No.380 a) b) 30 cm. x 30 cm. 55 cm. x 55 cm. Sq. M. Sq. M. 596.00 666.00 126.00 126.00
35
Description of Items / Specification No. Providing and laying in position polished Kota Stone flooring --------- of approved quality 25mm to 30mm thick in plain/diamond pattern on a bed of cement mortar 1:6 including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No.:BdM.-3 Page No.380 a) b) 30 cm. x 30 cm. 55 cm. x 55 cm.
Unit
Bd. M. -3
Sq. M. Sq. M.
1031.00 1086.00
126.00 126.00
Providing and laying in position skirting or dado of polished Shahabad Stone slab of approved quality 25mm to 30mm thick on plaster in cement mortar 1:4, including cement float, filling joints with neat cement slurry, curing polishing and cleaning etc. complete. Spec. No.:BdM.-5 Page No.381 Sq. M. 683.00 141.00
Bd. M. -5 7
Bd. M. -5 8
Providing and laying in position skirting or dado of polished Tandur Stone slab of approved quality 25mm to 30mm thick on plaster in cement mortar 1:4, including cement float, filling joints with neat cement slurry, curing polishing and cleaning etc. complete. Spec. No.:BdM.-5 Page No.381 Sq. M. Providing and laying in position skirting or dado of polished Kota Stone slab of approved quality 25mm to 30mm thick on plaster in cement mortar 1:4, including cement float, filling joints with neat cement slurry, curing polishing and cleaning etc. complete. Spec. No.:BdM.-5 Page No.381 Providing and laying cement concrete flooring -------mm thick with cement concrete M-25 laid to proper line, level and slope in alternate bays including compaction, filling joints marking lines to give appearance of tiles 30cm x 30cm or other approved design, finishing smooth (with extra cement) in approved colour as directed and curing etc. complete. Spec. No.:BdM.-6 Page No.381 a) 40mm b) 50mm 36 Sq. M. Sq. M. Sq. M.
649.00
153.00
Bd. M. -5 9
1086.00
153.00
Bd. M. -6
290.00 336.00
106.00 106.00
Description of Items / Specification No. Providing and laying white glazed tiles of -------------------------- in size and 5 to 6 mm thick for flooring in required positions and laid on a bed of cement mortar 1:4 including neat cement float, filling joints with white cement slurry, curing and cleaning etc. complete. (Including all specials required like round edge tiles, corner cups ,etc.) (with white cement)
Unit
Sq. M. Sq. M.
998.00 1034.00
170.00 170.00
Providing and laying coloured glazed tiles of -------------------- in size and 5 to 6 mm thick for flooring in required positions and laid on a bed of cement mortar 1:4 including neat cement float, filling joints with white cement slurry, curing and cleaning etc. complete. (Including all specials required like round edge tiles, corner cups, etc) Sq. M. Sq. M. 990.00 1016.00 156.00 156.00
Providing and fixing white glazed tiles of ---------------------- in size and 5 to 6 mm thick for dado and skirting in required positions on plaster of cement mortar 1:4 including neat cement float, including filling joints with white cement slurry, curing and cleaning etc. complete. (Including all specials required like round edge tiles, corner cups, etc) Bd. M. -13 Spec. No.:BdM.-13 Page No.386 148.5x148.5mm Sq. M. a) 200 x 100mm Sq. M. b) Providing and fixing coloured glazed tiles of -------------------- in size and 5 to 6 mm thick for dado and skirting in required positions on plaster of cement mortar 1:4 including neat cement float, including filling joints with white cement slurry, curing and cleaning etc. complete. (Including all specials required like round edge tiles, corner cups, etc) Bd. M. -13 Spec. No.:BdM.-13 Page No.386 148.5x148.5mm Sq. M. a) 200 x 100mm Sq. M. b) 13
990.00 1016.00
304.00 509.00
905.00 1085.00
326.00 326.00
37
Description of Items / Specification No. Providing and fixing ceramic tiles of IS Std. and approved quality ______ cm size for flooring in required position laid on bed of cement mortar 1:4 including cement float, filling joint with white/colour cement slurry, cleaning, curing, etc. complete.
Unit
Bd. M. -12 Spec. No.:BdM.-12 Page No.385 60x60cm. a) b) c) d) 15 45x45cm. 30x30cm. 20x20cm.
Providing and laying ceramic tiles of IS Std. and approved quality ______ cm size for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of cement mortar 1:4 including joint filling with white/colour cement slurry, cleaning, curing etc. complete.
Bd. M. -13 Spec. No.:BdM.-13 Page No.386 a) b) c) d) 16 60x60cm. 45x45cm. 30x30cm. 20x20cm. Sq. M. Sq. M. Sq. M. Sq. M. 1296.00 1296.00 1295.00 1132.00 277.00 277.00 277.00 277.00
Providing and laying ------- marble mosaic 25 x 25cm and 20mm thick for flooring in required position set on a bed of 1:4 cement mortar including neat cement float, filling the joints with white cement slurry mixed with approved shade of pigment to match the colour of tiles, curing, polishing and rubbing etc. complete with/without border.
Bd. M. -14 Spec. No.:BdM.-14 Page No.386 Grey cement base a) b) White cement base
Sq. M. Sq. M.
494.00 595.00
110.00 110.00
38
Unit
Providing and fixing -------------- marble mosaic 25 x 25cm and 20mm thick of approved colour and pattern, white and coloured marble chips of size 6 to 20 mm for dado and skirting in required position set on a bed of 1:4 cement mortar including neat cement float, filling the joints with white cement slurry mixed with approved shade of pigment to match the colour of tiles, curing, polishing and rubbing etc. complete with / without border. Bd. M. -15 Spec. No.:BdM.-15 Page No.387 a) b) 18 gray cement base white cement base Sq. M. Sq. M. 583.00 653.00 188.00 188.00
Providing and laying machine cut white / coloured marble slab 60 x 45 cm and 20 mm thick of approved quality, vein and colour for flooring in required pattern on a bed of 1: 6 cement mortar including neat cement float, filling joints with white/coloured cement slurry, curing, polishing and cleaning complete. Sq. M. 2729.00 120.00
Bd. M. -16 Spec. No.:BdM.-16 Page No.387 19 Providing and laying machine cut white / coloured marble slab 60 x 45 cm and 20 mm thick of approved quality, vein and colour for dado and skirting in required pattern on a bed of 1: 4 cement mortar including neat cement float, filling joints with white/coloured cement slurry, curing, polishing and cleaning etc. complete.
Bd. M. -17 Spec. No.:BdM.-17 Page No.387 20 Providing and laying in situ marble mosaic of 10 mm thickness with white and coloured marble chips of size 6 mm in coloured cement in suitable panels for flooring including under layer of 1:2:4 I.P.S.. 30 mm. thick, providing aluminium strips to form panels, leveling, compaction, curing, polishing and cleaning etc. complete.
Sq. M.
2785.00
166.00
Sq. M.
571.00
166.00
39
Description of Items / Specification No. Providing and laying in situ marble mosaic dado and skirting 6 mm thick with white and coloured marble chips of size upto with suitable panels on cement plaster 1:3, 20 mm thick including aluminium strips for forming panels, rounding of corners and junctions with flooring and walls, curing, polishing and cleaning etc. complete.
Unit
Bd. M. -19 Spec. No.:BdM.-19 Page No.388 22 Providing and laying in required positions flooring of tukada mosaic (broken mosaic tile pieces) of approved coloured and pattern, set in a bed of 1:4 cement mortar, including neat cement/coloured cement float, giving proper slopes, compaction, curing and finishing etc. complete.
Sq. M.
562.00
283.00
Sq. M.
488.00
240.00
Providing and fixing 1mm thick approved P.V.C.. / Synthetic tiles flooring/dado & skirting of approved make and quality and required size with ready made adhesive (ISI mark quality) including cleaning surface before laying, leveling the surface etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. Providing and laying polished ----------------------stone slabs 25 to 30 mm thick for treads and risers for steps and staircase in one piece with rounded nosing & engraving three lines for treads on bed of 1:4 cement mortar including neat cement float, filling joints with cement slurry, curing, polishing and cleaning etc. complete.
455.00
86.00
24
Bd. M. -22 Spec. No.:BdM.-22 Page No.390 a) b) c) d) Shahabad Tandur Kota Black Kadappa Sq. M. Sq. M. Sq. M. Sq. M. 684.00 715.00 1072.00 508.00 199.00 195.00 217.00 199.00
40
Description of Items / Specification No. Providing and laying white cement based marble mosaic tiles 20 mm thick of approved colour and pattern with white and coloured marble chips of size 6 to 20mm for treads and risers of steps and staircases, with nosing for the treads moulded as per drawing or as directed on a bed 1:4 including neat cement float, filling joints with neat coloured cement slurry to match the colour of tile, curing, polishing, and cleaning etc. complete.
Unit
Bd. M. -25 Spec. No.:BdM.-25 Page No.391 26 Providing and laying white / approved colour marble slabs 20 mm thick of approved quality, colour and veins, for treads and risers of steps and staircases in one piece with round nosing & engraving three lines for treads on bed of 1:4 cement mortar including neat cement float, filling joints with cement slurry to match colour of the slabs, curing, polishing and cleaning etc. complete.
Sq. M.
552.00
186.00
Sq. M.
3006.00
174.00
Providing and laying precast polished chequered colour cement tiles of size 20 x 32 and 20 mm thick for treads and riser of steps and staircase with nosing of treads moulded as per drawing or as directed on bed of 1:4 cement mortar including neat cement float, filling joints with cement slurry mixed with approved shade of pigment to match the colour of tiles, curing, polishing and cleaning etc. complete. Bd. M. -33B Spec. No.:BdM.-33B Page No.392 Sq. M. Providing sills, jambs and frames of polished ------------ stone 25 to 30 mm thick, on a bed of cement mortar 1:4 including neat cement float, filling joints with cement slurry, curing, polishing, rounding edges, cleaning etc. complete Bd. M. -29 Spec. No.:BdM.-29 Page No.391 a) b) c) d) Shahabad Tandur Kota Black Kadappa 41 Sq. M. Sq. M. Sq. M. Sq. M. 28
539.00
132.00
Description of Items / Specification No. Providing sills, jambs and frames of white/approved colour marble slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete.
Unit
Bd. M. -31 Spec. No.:BdM.-31 Page No.392 30 Providing 25 to 30 mm thick partitions of polished black Kadappa stone of approved shape, quality and colour for urinals including cutting holes of required sizes in appropriate places to receive pipes etc., fixing in the cement mortar 1:3, curing and cleaning etc. complete.
Sq. M.
2352.00
106.00
Bd. M. -35 Spec. No.:BdM.-35 Page No.393 31 Providing and fixing Kadappa Stone slab for Kitchen platform of approved type and design 40 mm thick in cement mortar 1:4, including providing and fixing border patti on front edge, filling joints, curing, cleaning etc. complete. As directed by Engineer-In-Charge. 32 Washing & Cleaning natural surface of stone or any kind of marble including clearing etc. complete Spec. As directed by Engineer-In-Charge. 33 Providing machine polishing to cement/marble mosaic tiled flooring or any other type of flooring including cleaning, washing, etc. complete as directed. Spec. As directed by Engineer-In-Charge. 34 Providing hand polishing to dado, skirting including cleaning, washing etc. complete as directed. Spec. As directed by Engineer-In-Charge.
Sq. M.
764.00
245.00
Sq. M.
893.00
269.00
Sq. M.
12.00
11.00
Sq. M.
43.00
41.00
Sq. M.
25.00
24.00
42
Unit
Sq. M.
111.00
37.00
36
Sq. M.
626.00
123.00
37
Bd.M-15
Sq.M.
512.00
123.00
38
Bd/M-12 p-385
Sq.M.
1363.00
319.00
Bd/M-12 p-385
Sq.M.
1107.00
319.00
39
Bd/M-13 p-386
Sq.M.
1389.00
368.00
Bd/M-13 p-386
Sq.M.
1210.00
368.00
Deleted
43
Bd - N : Wood Finishes
Item No.& Item code 1 Description of Items / Specification No. Providing and applying boiled linseed oil in --------coat to old wood work including knotting, preparing the surface, scaffolding etc., complete as directed. Unit Rate for 12-13 (in Rs) Completed Labour
Deleted
Bd. N. -1.1 Spec. No.:BdN.-1.1 Page No.399 a) b) 2 one coat two coat Sq. M. Sq. M. 11.00 18.00 6.00 8.00
Providing and applying Wax polishing to the new wood work, including knotting, preparing the surface, scaffolding etc. complete as directed. Sq. M. 29.00 26.00
Bd. N. -1.2 Spec. No.:BdN.-1.2 Page No.399 3 Providing and applying Wax polishing to the old wood work, including knotting, preparing the surface, scaffolding etc. complete as directed.
Bd. N. -1.2 Spec. No.:BdN.-1.2 Page No.399 4 Providing and applying French polishing for required finish on previously polished wood, including knotting, preparing the surface, scaffolding etc. complete as directed.
Sq. M.
19.00
14.00
Bd. N. -1.3 Spec. No.:BdN.-1.3 Page No.399 5 Providing and applying French polishing to new wood work, including knotting, preparing the surface, scaffolding etc. complete as directed.
Sq. M.
40.00
34.00
Bd. N. -1.3 Spec. No.:BdN.-1.3 Page No.399 6 Providing and applying varnish in one coat on previously varnished wood work, including knotting, preparing the surface, scaffolding etc. complete.
Sq. M.
64.00
44.00
Sq. M.
18.00
8.00
44
Description of Items / Specification No. Providing and applying coal tar in----------- coat on previously painted wood, including preparing the surface, scaffolding etc. complete.
Unit
Bd. N. -1.1 Spec. No.:BdN.-1.6 Page No.400 a) b) 8 one coat two coat Sq. M. Sq. M. 8.00 16.00 6.00 10.00
Providing and applying Melamine polish of glossy / mat required finish of approved colour to woodwork by spray machine, including knotting and preparing the surface by scrapping, applying French polishing, scaffolding if required etc. complete. (The work to be executed with prior approval of Superintending Engineer.) Spec. As directed by Engineer-In-Charge. Sq. M. 589.00 292.00
45
Bd - O : Oil Painting
Item No.& Item code 1 Description of Items / Specification No. Providing and applying ____ of lead/zinc base oil paint/ bituminous paint of approved colour, shade and quality to new wood work and fibre boards including preparing the surface, knotting, scaffolding if necessary excluding primer coat etc. complete. Unit Rate for 12-13 (in Rs) Completed Labour
Deleted
Bd. O. -1. Spec. No.:BdO.-1. Page No.403 a) b) 2 Two coat three coat Sq. M. Sq. M. 60.00 88.00 16.00 22.00
Providing and applying ____ of lead/zinc base oil paint/ bituminous paint of approved colour, shade and quality to old wood work and fibre boards previously painted by the surface, knotting, scaffolding if necessary excluding primer coat etc. complete. Bd. O. -2. Spec. No.:BdO.-2. Page No.404 a) b) 3 Two coat three coat Sq. M. Sq. M. 54.00 82.00 16.00 22.00
Providing and applying _____ of lead/zinc base oil paint/ bituminous paint of approved colour, shade and quality to new structural steel work and iron work in buildings, including scaffolding if necessary cleaning and preparing the surface excluding primer coat etc. complete.. a) b) Two coat three coat Sq. M. Sq. M. 58.00 88.00 16.00 22.00
Providing and applying _____ of aluminium paint of approved make to new and old structural steel work in buildings and workshops, including scaffolding, cleaning the surface (excluding primer coat) etc. complete.
Bd. O. -4. Spec. No.:BdO.-4. Page No.405 a) b) Two coat three coat 46 Sq. M. Sq. M. 43.00 73.00 16.00 22.00
Description of Items / Specification No. Providing and applying Two coat of synthetic enamel paint of approved colour and quality to new and old structural steel work and wood work in buildings, including scaffolding if necessary and preparing the surface by solvent degreasing and derusting by manual methods, preparing the surface etc. complete. (excluding primer coat) a) b) Two coat three coat
Unit
Bd. O. -5. Spec. No.:BdO.-5. Page No.405 Sq. M. Sq. M. 65.00 88.00 16.00 22.00
Providing and applying _____ of flat oil paint of approved colour, shade and quality to the old structural steel work and iron work (previously painted) in building, including scaffolding if necessary, cleaning the surface etc. complete. (excluding primer coat) Bd. O. -6. Spec. No.:BdO.-6. Page No.406 a) b) 7 Two coat three coat Sq. M. Sq. M. 64.00 91.00 16.00 22.00
Providing and applying _____ of flat oil paint of approved colour, shade and quality to plastered surface including scaffolding if necessary, cleaning the surface etc. complete. (excluding primer coat)
Bd. O. -7. Spec. No.:BdO.-7. Page No.406 a) b) 8 Two coat three coat Sq. M. Sq. M. 70.00 97.00 16.00 22.00
Providing and applying ______ of waterproof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete. Bd. O. -8. Spec. No.:BdO.-8. Page No.406 a) b) Two coat three coat Sq. M. Sq. M. 43.00 49.00 16.00 22.00
47
Unit
Providing and applying one coat of seal cement primer of approved manufacture and shade, including scaffolding if necessary, cleaning the surface etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. Providing and applying one priming coat of approved quality, over steel and other metal surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with wire brush, fine steel wool and sand paper, scaffolding etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M.
17.00
10.00
10
19.00
7.00
11
Providing and applying one priming coat of approved quality to wood and wood based surface, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, by sand paper and scrapping, scaffolding etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. 23.00 7.00
12
Providing and applying one priming coat of approved quality on concrete / masonry / Asbestos cement / plastered surfaces, including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter and sand papering etc. complete. Spec. As directed by Engineer-In-Charge. Sq. M. 20.00 8.00
Deleted
48
Deleted
Bd. P. -1. Spec. No.:BdP.-1. Page No.411 2 Providing and applying colour wash of approved colour, shade and quality in _____ to new surface, including scaffolding, brushing and brooming down etc. complete. (excluding two coats of white wash as base coat to be paid separately).
Sq. M.
7.00
5.00
Bd. P. -2. Spec. No.:BdP.-2. Page No.412 a) b) 3 Two coat three coat Sq. M. Sq. M. 8.00 11.00 5.00 5.00
Providing and applying colour wash of approved colour, shade and quality in _____ to old surface, including scaffolding, brushing and brooming down etc. complete. (excluding one coat of white wash as base coat to be paid separately).
Bd. P. -3. Spec. No.:BdP.-3. Page No.412 a) b) 4 Two coat three coat Sq. M. Sq. M. 7.00 12.00 5.00 8.00
Providing and applying washable oil bound distemper of approved colour, shade and quality to old/new surface, in ______ including scaffolding, preparing the surfaces etc. complete. (excluding primer coat). Spec. No.:BdP.-5. Page No.413
Sq. M. Sq. M.
38.00 61.00
10.00 18.00
49
Description of Items / Specification No. Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in ______, including scaffolding, preparing the surfaces etc. complete. (excluding primer coat).
Bd. P. -6. Spec. No.:BdP.-6. Page No.414 a) Two coat b) 6 three coat Providing and applying primer coat of approved quality to old/new wall surface to receive oil bound distemper treatment, including scaffolding, preparing the surface as directed etc. completed. (Prior approval of S.E. shall be obtained) Spec. As directed by Engineer-In-Charge.
Sq. M. Sq. M.
62.00 114.00
14.00 18.00
Sq. M.
18.00
8.00
Deleted
50
Bd - Q : Wood Work
Item No.& Item code 1 Description of Items / Specification No. Providing and fixing ____ wood framed collar beam / king post / queen post truss with all iron work, including scaffolding if necessary and primer coat etc. complete. Unit Rate for 12-13 (in Rs) Completed Labour
Bd. Q. -4. Spec. No.:BdQ.-4. Page No.422 a) b) 2 country cut teak hard wood
Deleted
Cu. M. Cu. M.
84334.00 39512.00
11665.00 11665.00
Providing and fixing 100 mm dia. country teak wood ballies for king post truss of 6.00 m'. span as per drawings or as directed by Engineer-in-charge, including all iron work, scaffolding if necessary and oiling complete. R. M. 181.00 90.00
Bd. Q. -23. Spec. No.:BdQ.-23. Page No.435 3 Providing and fixing ____ wood common rafters, purlins and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc., including scaffolding if necessary, all iron work and one primer coat complete.
Bd. Q. -5 Spec. No.:BdQ.-5. Page No.423 a) b) 4 country cut teak hard wood Cu. M. Cu. M. 79183.00 44741.00 4996.00 4313.00
Providing and fixing jungle wood ballies of approved species 85 mm average diameter for common rafters, purlins, ridge, hip and valley rafters, jack rafter, wall plate, post plate, posts etc., including all iron work, scaffolding if necessary and oiling in one coat etc. complete. Bd. Q. -22 Spec. No.:BdQ.-22. Page No.434. 5 Providing and fixing _____ wood joists and girders in timber floors of single, double or framed type, including scaffolding if necessary and one primer coat etc. complete.
R. M.
109.00
19.00
Bd. Q. -2 Spec. No.:BdQ.-2. Page No.420 a) b) country cut teak hard wood 51 Cu. M. Cu. M. 78665.00 -3576.00 --
Description of Items / Specification No. Providing and fixing country cut teak wood planking ___ mm thick for flooring planed on both sides, tongued and grooved, including scaffolding if necessary and primer coat etc. complete.
Unit
Bd. Q. -1 Spec. No.:BdQ.-1. Page No.419 a) b) 7 50mm 25mm Sq.M. Sq.M. 3729.00 1949.00 55.00 55.00
Providing and fixing country cut teak wood plank ceiling 20 mm thick planed on the underside, tongued and grooved, including iron screws and scaffolding if necessary, including primer coat on underside and one coat tar on upperside complete. Sq.M. 1796.00 76.00
Bd. Q. -3 Spec. No.:BdQ.-3. Page No.421 8 Providing and fixing _____ wood two way trellis work with battens or laths 2.5 x 1.2 cm and 5.0 x 5.0 cm openings, including frame of 8.0 x 5.0 cm vertical and horizontal scantlings and one coat of primer complete.
Bd. Q. -6 Spec. No.:BdQ.-6. Page No.424 a) b) 9 country cut teak hard wood Sq.M. Sq.M. 963.00 418.00 49.00 49.00
Providing and fixing ______ wood eaves board 15 cm wide and 25 mm thick plain type, including scaffolding and primer in one coat complete.
Bd. Q. -19 Spec. No.:BdQ.-19. Page No.432 a) b) 10 country cut teak hard wood R.M. R.M. 473.00 142.00 49.00 34.00
Providing and fixing country cut teak wood eaves plate of size 10 cm wide and 20 mm thick; including scaffolding and primer in one coat complete. R.M. 217.00 31.00
52
Description of Items / Specification No. Providing and fixing _____ wood barge board 22 cm wide and 20 mm thick plain type, including scaffolding and primer in one coat complete.
Unit
Bd. Q. -21 Spec. No.:BdQ.-21. Page No.433 a) b) 12 country cut teak hard wood R.M. R.M. 522.00 194.00 79.00 53.00
Providing and fixing in position Indian teak wood hand rail of 60 x 70 mm as per detailed drawings or as directed by the Engineer-in-charge, including French polishing etc. complete. R.M. 631.00 155.00
Bd. Q. -8 Spec. No.:BdQ.-8. Page No.425 13 Providing and fixing in position P.V.C. hand rail of approved quality as per IS Std. make and shade, as per detailed drawings or as directed by the Engineerin-charge, including French polishing etc. complete. (50mm size) Spec. As directed by Engineer-In-Charge. 14 Providing and fixing country cut teak wood skirting 20 mm thick in required position and of the size shown in the drawings, including all mouldings as per drawings, rough grounds, rawal plugs if necessary and finishing with French polish etc. complete.
R.M.
245.00
34.00
Bd. Q. -10 Spec. No.:BdQ.-10. Page No.426 15 Providing and fixing 20 mm thick teak wood particle board, faced with teak wood veneer for pelmet boxes of 150 to 200 mm wide, to door or window frames, including 20 mm diameter aluminium curtain rod with sockets and finishing with French polishing etc. complete. (without top)
Sq.M.
2495.00
750.00
Sq.M.
1838.00
857.00
53
Description of Items / Specification No. Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of country cut teak wood frame work of battens 12 x 25 mm at 30 cm centre to centre fixed to walls and pillars, without skirting and cornice as per drawings, including necessary iron work and finishing the exposed wood with French polish etc. complete.
Unit
Bd. Q. -18 Spec. No.:BdQ.-18. Page No.431 17 Providing and fixing shutter to wall cupboard made from 12 mm thick teak wood particle board and face with approved colour laminated face bonded with phenol formaldehyde synthetic resin B.W.P.. grade, including lipping, beading, iron oxidized fixtures and fastenings and painting primer one coat etc. complete. Spec. As directed by Engineer-In-Charge.
Sq.M.
853.00
105.00
Sq.M.
1473.00
499.00
Deleted
54
Deleted
Bd. R. -1 2
Sq.M.
601.00
48.00
Providing and fixing Mangalore tiled roofing with class "AA" tiles, including securing the last course of tiles near the eaves with steel flats of 40 x 3 mm and fixing by 112 mm long screw and fixing of 50mm x 25mm country teak wood sloping battens and fixing 50 x 25 mm country teak wood horizontal battens over the sloping battens including painting to all iron work and coal tarring the battens etc. complete. (excluding ridge and hip tiles) Spec. No.:BdR.-2. Page No.450 Providing and fixing new Mangalore tiles with "AA" tiles including scaffolding to M.T. roofing excluding wood work. etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. 246.00 19.00 Sq.M. 661.00 52.00
Bd. R. -2 3
Providing and fixing Mangalore type ridge and hip tiles class "AA" tiles, including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. Spec. No.:BdR.-3. Page No.450 Providing and fixing galvanizing corrugated iron sheets of 0.79mm thickness (22 B.W.G..) conforming IS. 277-1969 for roofing without wind tiles, including fastening with galvanized iron screws and bolts and bitumen washers as per drawing etc. complete. Spec. No.:BdR.-5. Page No.452 Sq.M. 621.00 37.00 R.M. 176.00 52.00
Bd. R. -3 5
Bd. R. -5
55
Description of Items / Specification No. Providing and fixing plain zinc sheeting of 1.00mm thickness (20 B.W.G.) over ridge, hip or valley for galvanized corrugated iron sheet roofing, including fastening with galvanized iron screws and bolts and bitumen washers as per drawing etc. complete. Spec. No.:BdR.-6. Page No.452 Providing and fixing 6 mm thick asbestos cement corrugated (Big size) sheet roofing conforming to I.S.. 459-1970, including galvanized iron J or L hook bolts, galvanized iron and bituminous washers, galvanized iron clamp bolts and nuts and scaffolding etc. complete. Spec. No.:BdR.-7. Page No.453 Providing and fixing 6 mm thick asbestos cement corrugated (Trafford) sheet roofing including galvanized iron J or L hook bolts, galvanized iron and bituminous washers, galvanized iron clamp bolts and nuts and scaffolding etc. complete. Spec. No.:BdR.-8. Page No.454 Providing and fixing 6 mm thick asbestos cement ridge capping for roofing conforming to I.S.. 4591970, including galvanized iron hook bolts, galvanized iron and bituminous washers, galvanized iron clamp bolts and nuts and scaffolding etc. complete. Spec. No.:BdR.-9. Page No.455 Providing and fixing valley gutter of 1.00 mm thick (22 B.W.G.) plain galvanized iron sheets ___ wide with teak wood planking of 20.00mm thick, including two coats of coal tarring the upper surface of plank. (excluding painting to under side of plank) etc. complete.
Unit
Bd. R. -6 7
Sq.M.
430.00
74.00
Bd. R. -7 8
Sq.M.
446.00
38.00
Bd. R. -8 9
Sq.M.
376.00
34.00
Bd. R. -9 10
R.M.
361.00
80.00
Bd. R. -10 Spec. No.:BdR.-10. Page No.455 a) b) 120 cm. 90 cm. R.M. R.M. 2390.00 1815.00 173.00 124.00
56
Description of Items / Specification No. Providing and fixing asbestos cement sheet of IS Std. (60cm top width) & (23 bottom width) & (15cm depth) valley gutters of approved size and make including drop ends, stop ends necessary fixtures and fastening the same as per code of standard practice etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
R.M.
227.00
75.00
12
Providing and fixing 12 mm dia. mild steel bar upto 0.5 metre length for anchor rods with necessary threading nuts and bolts etc. etc. complete. Spec. As directed by Engineer-In-Charge. No. 72.00 51.00
13
Providing and fixing 16 mm dia. mild steel bars upto 0. 5 metre length for anchor rods with necessary threading nuts and bolts etc. complete. Spec. As directed by Engineer-In-Charge. No. 103.00 51.00
14
Providing and fixing glass tiles of Mangalore type at required places in Mangalore tile roof, including scaffolding, if necessary etc. complete. No. 486.00 15.00
Bd. R. -11 Spec. No.:BdR.-11. Page No.456 15 Providing and fixing asbestos cement cowl ventilators in asbestos cement sheet roofing at the required places, including all accessories and scaffolding, if necessary etc. complete.
Bd. R. -14 Spec. No.:BdR.-14. Page No.459 16 Providing and fixing Mangalore pattern cowl ventilator tiles in the required places in a Mangalore tiled roof including scaffolding if necessary etc. complete.
No.
131.00
42.00
Bd. R. -13 Spec. No.:BdR.-13. Page No.459 17 Providing and fixing C.C.T.. wood battens _____ for Mangalore tiled roof work with all iron works, scaffolding etc. complete. Spec. As directed by Engineer-In-Charge. a) b) 50x25 mm. 25x12 mm. 57
No.
92.00
20.00
R.M. R.M.
72.00 28.00
6.00 6.00
Description of Items / Specification No. Providing and fixing skylight in R.C.C. roof including M.S. frame with all accessories and required fixtures and fastening fitting etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
1597.00
60.00
19
Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick, including scaffolding if necessary, all iron work etc. complete. (including C.T.W. frame 70mm x\40mm & work and teak wood runner) Sq.M. 1439.00 161.00
Bd. R. -16 Spec. No.:BdR.-16. Page No.460 20 Providing and fixing false ceiling of teakwood particle board 12mm thick, including scaffolding if necessary, all iron work etc. complete. (excluding frame work and teak wood runner to be paid separately)
Bd. R. -17 Spec. No.:BdR.-17. Page No.461 21 Providing and fixing false ceiling of 15 to 20 mm thick decorative boards of fibre plaster of paris, including scaffolding if necessary, all architectural work like mouldings, cornices, curves, domes, cups as per detailed drawing and three coats of spray painting to boards etc. complete. (excluding frame work, runners & mild steel suspenders to be paid separately)
Sq.M.
1252.00
172.00
Bd. R. -18 Spec. No.:BdR.-18. Page No.461 22 Providing and fixing false ceiling of 12 mm thick acoustic boards of approved make, with shapes and sizes as per drawings, including scaffolding, all screws and fastening and finishing etc. complete. (excluding frame work and runner to be paid separately)
Sq.M.
563.00
120.00
Bd. R. -19 Spec. No.:BdR.-19. Page No.462 23 Providing and dammering to roof with Two coat of bitumen (on new dungree cloth one coat on each side) including scaffolding etc. complete as directed. Spec. As directed by Engineer-In-Charge.
Sq.M.
1214.00
160.00
Sq.M.
81.00
37.00
58
Description of Items / Specification No. Providing and dammering to roof one coat of Bitumen (without cloth) including scaffolding etc. complete. Spec. As directed by Engineer-In-Charge. Providing and fixing glass crete roof in reinforced concrete member (0.05 x 0.75 meter) in size at 60 centimeter, center to center with 12 millimeter thick wired glass having thickness of 6 millimeter, including all accessories and required fixtures and fastenings, fitting etc. complete. (excluding reinforced cement concrete member) Spec. As directed by Engineer-In-Charge. Providing and fixing in position Gypsum board false ceiling with 12.5 mm th. Gypsum boards, screwed/ fixed to the under structure of suspended G.I. Grid constructed & suspended from the main ceiling consisting of ceiling sections at maximum centre to centre distance 600 millimeters perimeter channel intermediate channels at maximum centre to centre distance 1200 millimeters galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional / intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 millimeters item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs etc. all complete. Spec. As directed by Engineer-In-Charge. Providing & fixing Prepainted Galvanized iron plain colour sheets of 0.50 mm thickness having coating quality provides excellent corrosion protection for Ridge capping and vally gutter without wind tiles coforming to Indian standard ,with minimum ten year guarantee on bond paper, including G.I.screws & bolt & rubber washers with the help of drill machine fitting and Scaffolding ,for 10 to 20 degree slope of roof ,as per detailed drawing & design Or as directed by engg. charge etc. complete Spec. As directed by in Engineer-In-Charge. 59
Unit
Sq.M.
28.00
24.00
25
Sq.M.
903.00
112.00
26
Sq.M.
1176.00
161.00
27
Sq.M.
660.00
26.00
Door Frames
1 Providing and fixing ______ door frame as per drawing for second class doors without ventilators, windows, fanlights etc., including all mouldings, rebating, holdfast and finishing with one coat of primer etc. complete. Spec. No.:BdT.-2. Page No.478 a) b) 2 country cut teak wood. seasoned and treated non teakwood Cu.M. Cu.M. 111653.00 49702.00 15094.00 15094.00
Deleted
Bd. T. -2
Providing and fixing in position precast R.C.C. (as per IS 456-2000) M-40 frames for doors / windows / louver windows of section 125 x 50 mm with two tor steel bars of 8 mm / 10 mm diameter for compressed strength of 300 kg/square centimetre with wood like finish having 3 numbers of 12 gauge M.S. galvanized plates on vertical members for fixing hinges with 4 numbers of threaded holes in each plate, 2 numbers of 12 mm dia. holes on horizontal top members for tower bolts, 2 numbers of 16 mm dia. holes on vertical members for fixing Aldrop or Tadi, 3 numbers of M.S. galvanized heavy duty hinges with 12 numbers G.I.. machine screws of 3/16" x 3/8", 6 numbers of M.S. galvanized specially designed hold fast anchored with tor steel bars of vertical members etc. complete (with all lead), Excluding painting to the frame) Spec. As directed by Engineer-In-Charge. R.M. 456.00 45.00
Providing and fixing factory made precast door/window frames of cement concrete (as per IS456-2000) M-40 grade of section 100 x 60 mm including reinforcement as per I.S.6523 with polymeric blocks having screw holding capacity of 250 kg. screw, fixed in position of R.C.C. frame as per requirement and as per specifications without fan light including holdfasts, carting and erecting in position and two coats of oil paint etc. complete. Spec. As directed by Engineer-In-Charge. R.M. 565.00 56.00
60
Description of Items / Specification No. Providing and making of Alluminium frame works with all necessary Alluminium sections, fixtures and fastening required screws and nuts etc. of IS Std. for outer frames, shutter frames using for Doors, windows and cupboards. (Only weight of Alluminium section) without powder coating, without wooden filler etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Kg.
524.00
242.00
Providing and applying coloured powder coating to the Alluminium section as per details given or direction etc. complete. (Colour sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge. Sq.M. 465.00 46.00
Providing and fixing anodized aluminium fully glazed doors including door frame with powder coating 5 mm thick sheet glass necessary fixtures, and fastenings, neoprene type rubber plain gaskets as per IS std. & detailed drawing etc. complete. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge. Sq.M. 4317.00 76.00
Providing and fixing Sintex or equivalent door frames made out of rigid PVC hollow, section DWUF-412 of size 38 mm x 32 mm with steel reinforcement ST-33 of size 14 x 33 mm, machine cut and welded and tie rod at the bottom including fixing 100 mm long expandable screws in required number with wooden plugs fixed in walls as holdfasts and remaking damaged surface etc. complete. (For Toilet Blocks & Windows) Spec. As directed by Engineer-In-Charge. R.M. 362.00 24.00
61
Description of Items / Specification No. Providing and fixing Sintex or equivalent door frames made out of rigid PVC hollow section DWUF405 of size 48 mm x 40 mm with steel reinforcement ST-22 of size 22 x 18 mm, machine cut and welded and tie rod at the bottom including fixing 100 mm long expandable screws in required number with wooden plugs fixed in walls as holdfasts and remaking damaged surface etc. complete. (For Toilet Blocks) Spec. As directed by Engineer-In-Charge.
Unit
R.M.
391.00
24.00
Providing and fixing Sintex or equivalent door frames made out of rigid PVC hollow section BLR53 of size 60 mm x 53 mm with steel reinforcement ST-53 of size 27 x 20 mm, machine cut and welded and tie rod at the bottom including fixing 100 mm long expandable screws in required number with wooden plugs fixed in walls as holdfasts and remaking damaged surface etc. complete. (For Internal Rooms) Spec. As directed by Engineer-In-Charge. R.M. 571.00 23.00
10
Providing and fixing of PVC make frame choukhat having size 53 x 60 mm. The choukhat will be attached to the wall with the help of screws. The choukhat will be filled with solid polymer material in all voids necessary for fixing the screws. Spec. As directed by Engineer-In-Charge. R.M. ---
Door Shutters
11 Providing and fixing C.C.T.W. double leaf second class fully panelled door shutter without fanlight adopting sections and sizes as given in the standard specifications Volume II (1981) or as per detailed drawing, including Iron oxidized / alluminium with powder coating fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (without frame) Spec. No.:BdT.-7. Page No.481 Sq.M. 4601.00 845.00
Bd. T. -7
62
Description of Items / Specification No. providing and fixing C.C.T.W. single leaf for second class fully paneled door shutter without ventilator adopting sections and sizes as given in the standard specifications Volume II (1981) or as per detailed drawing, including Iron oxidized/ alluminium with powder coating fixtures fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (Without frame) Spec. No.:BdT.-8. Page No.482 Providing and fixing double leaf panelled door shutter 35mm thick as per detailed drawings consisting of C.C.T.W. vertical styles and top rail and frizer rails of 100 x 35 mm and lock rail 160 x 35 mm and bottom rail 250 x 35mm and panels - 12 mm thick 3 layered flat pressed teak wood particle board bonded with B.W.P. type exterior grade phenol formaldehyde synthetic resin ___ (conforming to I.S. 3097-1980) including Iron oxidized/ alluminium with powder coating fixtures and fastenings and T.W.. beading at junctions of panels inserted including finishing with one coat of primer etc. complete. (sample to be got approved form Ex. Engineer before use). Spec. No.:BdT.-7. Page No.481 a) with commercial veneers on both sides b) with one side decorative teak-wood faced veneer and other side commercial ply
Unit
Bd. T. -8 13
Sq.M.
4323.00
898.00
Bd. T. -7
Sq.M. Sq.M.
3469.00 3356.00
859.00 859.00
14
Providing and fixing single leaf panelled door shutter 35mm thick as per detailed drawing consisting of C.C.T.W. styles, top rail, frieze rail of 100 x 35 mm and inserting panels of 12 mm thick teak wood particle board bonded with phenol formal dehyde synthetic resin grade generally conforming to I.S.. 3097-1980 including iron oxidized/ alluminium with powder coating fixtures and fastenings and finishing with one coat of wood primer etc. complete. (without frame). Spec. No.:BdT.-8. Page No.482 Sq.M. 2948.00 859.00
Bd. T. -8
63
Description of Items / Specification No. Providing and fixing C.C.T.W. double leaf second class partly paneled partly glazed door shutter without ventilator adopting sections and sizes as given in the standard specifications Volume II (1981) or as per detailed drawing, including Iron oxidized fixtures / alluminium with powder coating fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (Without frame)
Unit
Bd. T. -11 Spec. No.:BdT.-11. Page No.482 16 Providing and fixing C.C.T.W. single leaf second class partly panelled partly glazed door shutter without ventilator adopting sections and sizes as given in the standard specifications Volume II (1981) or as per detailed drawing, including Iron oxidized/ alluminium with powder coating fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (Without frame)
Sq.M.
3842.00
859.00
Bd. T. -12 Spec. No.:BdT.-12. Page No.483 17 Providing and fixing C.C.T.W. double leaf 22 mm thick second class plain planked door shutter without ventilator adopting sections and sizes as given in the standard specifications Volume II (1981) or as per detailed drawings, including Iron oxidized/ alluminium with powder coating fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (Without frame)
Sq.M.
3390.00
859.00
Bd. T. -21 Spec. No.:BdT.-21. Page No.493 18 Providing and fixing C.C.T.W. single leaf 22 mm thick for second class plain planked door shutter without ventilator adopting sections and sizes as given in the standard specifications Volume II (1981) or as per detailed drawings, including Iron oxidized/ alluminium with powder coating fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (Without frame)
Sq.M.
3312.00
614.00
Sq.M.
3181.00
598.00
64
Description of Items / Specification No. Providing and fixing C.C.T.W. double leaf second class 22mm thick false paneled door shutter without fanlight, fixing 10 mm thick scantling to give appearance of panels as per detailed drawing including Iron oxidized/ alluminium with powder coating fixtures & fastening and finishing the wood work with one coat of primer etc. complete. (Without frame)
Unit
Bd. T. -23 Spec. No.:BdT.-23. Page No.494 20 Providing and fixing C.C.T.W. single leaf 22mm thick false paneled door shutter without fan light, fixing 10 mm thick scantling to give appearance of panels as per detailed drawing including iron oxidized / alluminium with powder coating fixtures & fastening and finishing the wood work with one coat of primer etc. complete. (Without frame)
Sq.M.
3312.00
614.00
Bd. T. -24 Spec. No.:BdT.-24. Page No.494 21 Providing and fixing C.C.T.W. single swing shutter part size paneled as per detailed drawings, including double acting brass spring hinges and finishing with French polishing etc. complete. (Without frame)
Sq.M.
3197.00
617.00
Bd. T. -27 Spec. No.:BdT.-27. Page No.495 22 Providing and fixing 25 mm thick C.C.T.W. single swing shutter part size panelled with obscured glass as per detailed drawings or as approved, including double acting brass spring hinges and finishing with French polishing etc. complete. (Without frame)
Sq.M.
2695.00
915.00
Sq.M.
2699.00
687.00
65
Description of Items / Specification No. Providing and fixing sintex or equivalent single leaf door shutter of approved colour made out extruded rigid PVC hollow section DWUF-305 shutter frame of size 26 x 47 mm having double wall construction as vertical styles, top and bottom rails and middle locks rail of size 26 x 94 mm and the panel in fill SPUF-105 multichamber hollow plastic section of size 12 x 150 mm joined each other by tongue and groove interlocking systems duly inserted in shutter frame and all shutter frames, lock rails, styles reinforced by seasoned wood inserted inside for fixing of hinges, aldrops, tower bolts and door stoppers etc. All corners should be machine cut, joined each other by metal screw after inserting rigid "L" bracket PVC reinforcement of size 125 x 200 mm including synthetic metal fixtures and fastenings, remaking damaged surface etc. complete. (Without Door frame) As directed by Engineer-in-charge
Unit
Sq.M.
2570.00
306.00
24
Providing and fixing sintex or equivalent single leaf door shutter of approved colour made out extruded rigid PVC hollow section DWUF-302 shutter frame of size 24 x 59 mm having double wall construction as vertical styles, top and bottom rails and middle locks rail of DWUF-312 of size 24 x 100 mm and the panel in fill SPUF-101 multichamber hollow plastic section of size 20 x 200 mm joined each other by tongue and groove interlocking systems duly inserted in shutter frame and all shutter frames, lock rails, styles reinforced by seasoned wood inserted inside for fixing of hinges, aldrops, tower bolts and door stoppers etc. All corners should be machine cut, joined each other by metal screw after inserting rigid "L" bracket PVC reinforcement of size 125 x 200 mm including synthetic metal fixtures and fastenings, remaking damaged surface etc. complete. (Without Door frame) As directed by Engineer-in-charge Sq.M. 2357.00 335.00
66
Description of Items / Specification No. Providing and fixing sintex or equivalent single leaf door shutter of approved colour made out extruded rigid PVC hollow section DWUF-306 shutter frame of size 33 x 47 mm having double wall construction as vertical styles, top and bottom rails and middle locks rail of size 33 x 94 mm and the panel in fill SPUF-101 multichamber hollow plastic section of size 20 x 200 mm joined each other by tongue and groove interlocking system duly inserted in shutter frame and all shutter frames, lock rails, styles reinforced by seasoned wood inserted inside for fixing of hinges, aldrops, tower bolts and door stoppers etc. All corners should be machine cut, joined each other by metal screw after inserting rigid "L" bracket PVC reinforcement of size 125 x 200 mm including synthetic metal fixtures and fastenings, remaking damaged surface etc. complete. (Without Door frame) As directed by Engineer-in-charge
Unit
Sq.M.
--
--
Bd. T. -34 Spec. No.:BdT.-34. Page No.499 a) with mortise lock b) 27 without mortise lock
Sq.M. Sq.M.
2769.00 1846.00
332.00 185.00
Providing and fixing 24 gauge plain Aluminiumum sheet on the face of door shutter including cutting to required size and fixing by screws including making good the damages if any to existing doors shutter and frame etc. complete as directed or as per detailed drawing. Spec. As directed by Engineer-In-Charge. Sq.M. 545.00 256.00
67
Description of Items / Specification No. Providing and fixing 30 mm thick single leaf door shutter of approved quality and make of ------------------- sheets on both sides filled with 'PUF' (Poly urethene foam) with three numbers of bright finished brass butt hinges (100 x 70 x 4 mm size) with brass screws, M.S. oxidized fixtures and fastenings such as one number of 16 mm dia. and 300 mm long aldrop, one number of 250 x 25 x 5mm door latch, two numbers of 100 mm and 200 mm long tower bolts and two numbers of 100 mm size handles and finished with one coat of approved primer etc. complete.. (Excluding shutter frame) Spec. As directed by Engineer-In-Charge. a) with 1.5mm thick P.V.C.. Sheets b) with 0.80mm thick G.I. Sheets
Unit
Sq.M. Sq.M.
2054.00 2354.00
205.00 235.00
29
Providing and fixing PVC multi leaf door shutter of approved colour / lamination made out of extruded rigid PVC hollow section PW2459 shutter frame of size 24 x 59 mm having double wall construction as vertical styles, top & bottom rails and middle lock rails of size 24 x 100 mm and the panel in PW20200 multi chamber hollow plastic section of size 20 x 200 joined each other by tongue and groove interlocking system duty inserted in shutter frames and all shutter frames, lock rails, styles reinforced by polymer inserted inside for fixing of hinges, aldrops, tower bolts and baby latch etc. All corners should be machine cut joined each other by metal screw after inserting rigid L bracket PVC reinforced of size 100 x 200 mm including synthetic metal / alluminium with powder coating, fixtures and fastenings remarking , damage surface etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing fibre glass reinforced polyster door (FRP Door ) shutter 30 mm thick confarming to i.s. 4020 ( 1 to 7 ) 1994 without ventilator including iron oxidised fixturesfastering etc. complete. ( without Door frame ) Spec. As directed by Engineer-In-Charge. Sq.M. 1840.00 92.00
30
4302.00
92.00
Deleted
68
Unit
Providing and fixing PVC Twin paneled single leaf door shutter of approved colour / lamination made out of extruded rigid PVC hollow section PW2459 shutter frame of size 24 x 59 mm having double wall construction as vertical styles, top & bottom rails and middle lock rails of PW24100H of size 24 x 100 mm and the panel in PW20610 multi chamber hollow plastic section of size 20 x 610 mm duty inserted in shutter frames, lock rails, styles reinforced by polymer inserted inside for fixing of hinges, aldrops, tower bolts and baby latch etc. All corners should be mitre cut joined each other by metal screw after inserting rigid L bracket PVC reinforced of size 100 x 200 mm including synthetic metal / alluminium with powder coating, fixtures and fastenings remarking , damage surface etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing PVC Twin paneled single leaf door shutter of approved colour / lamination made out of extruded rigid PVC hollow section PW2459 shutter frame of size 24 x 59 mm having double wall construction as vertical styles, top & bottom rails and middle lock rails of size 29 x 100 mm and the panel in PW20710 multi chamber hollow plastic section of size 25 x 710 mm duty inserted in shutter frames, lock rails, styles reinforced by polymer inserted inside for fixing of hinges, aldrops, tower bolts and baby latch etc. All corners should be machine cut joined each other by metal screw after inserting rigid L bracket PVC reinforced of size 100 x 200 mm including synthetic metal / alluminium with powder coating, fixtures and fastenings remarking , damage surface etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M.
2022.00
92.00
32
2350.00
124.00
Providing and fixing rolling steel shutter fabricated from 18/20 gauges steel laths with side guides, bottom rail, brackets, door suspension shaft, including rolling springs, locking arrangement and housing box at the top with one coat of red lead primer etc. complete. Bd. T. -55 Spec. No.:BdT.-55. Page No.510 Sq.M.
33
2212.00
167.00
69
Description of Items / Specification No. Providing and fixing rolling steel shutter fabricated from 18/20 gauges steel laths with side guides, bottom rail, brackets, door suspension shaft, including rolling springs, locking arrangement including 3 ball bearings and housing box at the top with one coat of red lead primer etc. complete.
Unit
Sq.M.
2561.00
180.00
Providing and fixing rolling steel shutter fabricated from 18/20 gauges steel laths with side guides, bottom rail, brackets, door suspension shaft, including rolling springs, locking arrangement and mechanical gear operation arrangement and one coat of red lead primer etc. complete. Bd. T. -56 Spec. No.:BdT.-56. Page No.511 Sq.M. 36 Providing and fixing collapsible steel gate in two leaves with channel pickets, pivoted flat bars, including top and bottom guide rollers, stoppers, handles, all fittings and accessories, locking arrangement and applying one coat of red lead primer etc. complete. Sq.M.
2436.00
158.00
2180.00
235.00
Ventilators
37 Providing and fixing C.C.T.W. second class fully glazed ............. rectangular in shape adopting sections and sizes as given in Standard Specifications Volume II (1981) or as per drawing, including iron oxidized / alluminium with powder coating, fixtures and fastening and finishing the wood work with one coat of primer etc. complete. (Without frame and mild steel bar)
Spec.No.:BdT.-4 Page No.479& BdT.-42 Page No. 503
a) b)
Ventilator Fanlight
Sq.M. Sq.M.
2542.00 2034.00
752.00 752.00
70
Description of Items / Specification No. Providing and fixing steel louvered windows / ventilators (IS std.) of various sizes as per detailed drawing without hot dip zinc coating including fabrication with approved type and quality all fixtures and fastening without teak wood boxing including finishing with one coat of primer and two coats of oil painting etc. complete. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
1903.00
240.00
39
Providing and fixing in position aluminium louvered windows/ ventilators (IS std.) of various sizes with powder coating as per detailed drawings and specifications including aluminium frames 80 x 38 mm box type 5 mm thick sheet glass louvers, clips / rubber plain P.V.C.. gaskets of approved quality etc. complete.. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge. Sq.M.
2182.00
253.00
Windows
Providing and fixing C.C.T.W. ____ double leaves second class windows (fully glazed) adopting sections and sizes as given in standard specifications Volume II (1981) with plain observed glass shutters without ventilators / fanlights as per detailed drawings, including iron oxidized / alluminium with powder coating fixtures and fastenings and finishing the wood work with one coat of primer etc. complete. (Without frame and mild steel bars) Bd. T. -42 Spec. No.:BdT.-42 Page No.503 a) b) 41 25mm thick 30mm thick Sq.M. Sq.M. 2296.00 2828.00 825.00 825.00 40
Providing and fixing C.C.T.W. louvered windows with teak wood frame 60 x 100 mm and glass louvers of approved quality with 16 mm dia mild steel bars between louvers, including finishing wood work and iron with one coat of primer etc.. complete . Bd. T. -52 Spec. No.:BdT.-52. Page No.506 Sq.M.
6088.00
893.00
71
Description of Items / Specification No. Providing and fixing C.C.T.W. double leaves second class window with paneled shutters 35 mm thick with panels 25 mm thick without ventilator / fanlights as per detailed drawings, including iron oxidized/ alluminium with powder coating fixtures and fastening and finishing the wood work with one coat of primer etc. complete . (Without frame)
Unit
Bd. T. -45 Spec. No.:BdT.-45. Page No.505 43 Providing and fixing steel windows of various sizes as per detailed drawings with hot dip zinc coating without/with ventilator including fabrication, glazing with non-acetinic / plain / obscured glass panels of approved type and quality, all fixtures and fastening without teak wood boxing,- and architraves and finishing with one coat of primer etc. complete. (Sample to be got approved from Ex. Engineer before use)
Sq.M.
2739.00
728.00
Bd. T. -53 Spec. No.:BdT.-53. Page No.509 44 Providing and fixing steel windows of various sizes as per detailed drawings with welded square bars 12 mm at 10cm centre to centre with hot dip zinc coating without/with ventilator including fabrication, glazing with plain / obscured glass panels of approved type and quality, all fixtures and fastenings without teak wood boxing, and architraves and finishing with one coat of primer etc. complete. (Sample to be got approved from Ex. Engineer before use)
Sq.M.
2893.00
209.00
Sq.M.
3225.00
202.00
72
Description of Items / Specification No. Providing and fixing steel windows-------------- made from preprinted cold rolled corrosion resistance steel profiles of required size and shape as per drawing and as directed by the Engineer in charge conforming to is 513 properly glavanised having zinc coating minimum 150 GSM conforming to IS 277 pretreated and phosphated coated with epoxy primer having thickness 5 to 7 microns properly baked, finally coated with polyester paint 12 to 16 micron thickness and baked properly, protected with ployethelene film to avoid damages durig handling including cotmer buckets, stiffener plates, hardware made of CRCA with zinc phosphating or powder coated high grade aluminum components, glass filled nylon joinery, high LTV resistance gaskets
Unit
made of EPDM with specially sleeted screws and fasteners as approved by the Engineer in charge including fixing glass 4 mm thick guard bars 12 mm square bars hold fast, fixing in position, filling gaps all around window after conveying to alf lifts and leads etc. complete. (Prior approval from S.E.'s essential) Spec. As directed by Engineer-In-Charge. a) b) c) d) 46 Double leaf without ventilator Double leaf with ventilator Double leaf with Double leaf ventilator Tripple leaf with Tripple leaf ventilator Sq.M. Sq.M. Sq.M. Sq.M. 3958.00 4159.00 4686.00 4865.00 396.00 416.00 468.00 486.00
Providing and fixing in position anodized extruded aluminium openable window of outer frame size 53 x 57mm (or as required size with proportionate change in weight) of average weight @ 1.118kg/Rmt and shutter of 53 x 57mm (or as required size) of average weight of 0.30 kg/Rmt. (or as required) with plain sheet glass 5.5mm thick with neoprene/rubber gasket with hinges, locking arrangement and wooden encasement wherever necessary etc. complete as directed by Engineer-incharge. Spec. As directed by Engineer-In-Charge. Sq.M.
5534.00
686.00
73
Description of Items / Specification No. Providing and fixing in position anodized extruded moulded aluminium fixed glass panel window having frame made out extruded tubular section of size 63 x 38mm x 2.00mm thickness (wt. 1.054 kg/Rmt.) mechanically assembled at corners with glazing, beading of angle 25 x 25 x 1.60mm thick (wt 0.21 kg/Rmt.) including plain sheet glass 5.5mm thick with rubber gasket and wooden encasement wherever necessary etc. as per approved drawing and specification etc. complete as directed drawing and specification etc. complete as directed by Engineer in charge. Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
3219.00
543.00
48
Supplying and fixing in position anodized extruded modular aluminium section ___ sliding windows mounted on rectangular frame of size 63 x 38 x 2.00mm thick (1.054 kg/Rmt.) made up of two/three track drain bottom section of size 61 x 45 x 1.3mm thick (1.055 kg/Rmt.) and top and sides sections of size 61 x 31 x 1.3mm thick (0.659 kg/Rmt.). The shutter should be of bearing bottom of size 40 x 18 x 1.2mm thick (0.417 kg/Rmt.) top member of size 40 x 18 x 1.20mm thick (0.475 kg/Rmt.) Interlocking section size of 43 x 27 x 1.30mm thick (0.558 kg/Rmt.) and handle section of size 43 x 18 x 1.30mm thick (0.424 kg/Rmt.) selected quality 5.5mm thick clear glass to be fixed in shutter with neoprene gasket with approved quality PVC rollers necessary locks handles PVC lining and wooden encasement wherever necessary etc. complete as directed by Engineer in charge. Spec. As directed by Engineer-In-Charge. a) Two track b) Three track Sq.M. Sq.M. 3078.00 5666.00 628.00 697.00
49
Providing and fixing 16 mm dia. mild steel round bars at 100 mm c/c to windows / ventilators / fanlights, fixing mild steel flats 40 x 6 mm in frame, cutting a recess to fit the flat exactly, including drilling the holes to flats to pass the bars through it 25 mm inside in wooden frame including providing two central flats of 40 x 6 mm by drilling holes. etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M.
937.00
189.00
74
Description of Items / Specification No. Providing and fixing 16 mm dia. mild steel round bars at 100 mm c/c to windows / ventilators / fanlights, fixing mild steel flats 40 x 6 mm in frame, cutting a recess to fit the flat exactly, including drilling the holes to flats to pass the bars through it 25 mm inside in wooden frame including providing one central flats of 40 x 6 mm by drilling holes including one coat of primer etc. complete. (when bar length exceeds 45 cm and upto 75 cm) Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
1133.00
261.00
51
Providing and fixing 16 mm dia. mild steel round bars at 100 mm c/c to windows / ventilators / fanlights, fixing mild steel flats 40 x 6 mm in frame, cutting a recess to fit the flat exactly, including drilling the holes to flats to pass the bars through it 25 mm inside in wooden frame without central mild steel flats including providing one coat of primer etc. complete. (No central flat to be provided upto 45 cm bar length) Spec. As directed by Engineer-In-Charge. Sq.M. 1296.00 262.00
52
Providing and fixing 16 mm dia. mild steel bars to window at 100 mm center to center, including one coat of primer etc. complete. (without M.S. flats) Spec. As directed by Engineer-In-Charge. Sq.M. 776.00 262.00
PARTITION
53 Providing and fixing partition 4 mm thick Indian teak veneer on both sides including C.C.T.W. frame of 70 x 35 mm at 60 cm C/C on both ways, including finishing with French polishing etc. complete. (without skirting) Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing partition 4 mm thick Indian teak veneer on one side and commercial type plywood on the other side including C.C.T.W. frame of 70 x 35 mm at 60 cm C/C on both ways, including finishing with French polishing to Veneer face and oil painting / French polishing to other face etc.complete. (without skirting) Spec. As directed by Engineer-In-Charge. Sq.M. 2142.00 334.00
2665.00
348.00
54
75
Description of Items / Specification No. Providing and fixing country teakwood partly veneered and partly glazed partition with C.C.T.W. frame and vertical members of same size 70 x 35 mm frame at 60 cm centre to centre and, decorative veneer of 4 mm thick panels including French polishing etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
2075.00
246.00
56
Providing and fixing partitions using 1.84 m height and 12 mm thick teakwood particle board bonded with phenol formal dehyde synthetic resin including C.C.T.W. vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and covering batten of 30 x 10 mm at 1.22 metre apart on both ways or as directed including finishing with one coat of primer etc. complete. Sq.M. 1284.00 258.00
Bd. T. -63 Spec. No.:BdT.-63. Page No.514 57 Providing and fixing partitions using 1.84 m height and 12 mm thick teakwood one face particle and other teak veneer bonded with phenol formaldehyde synthetic resin including CTW vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and covering batten of 30 x 10 mm at 1.22 metre apart on both ways or as directed including finishing with one coat of primer etc. complete.
Bd. T. -63 Spec. No.:BdT.-63. Page No.514 58 Providing and fixing partition using 1.84 metre height and 12mm thick teak wood with both faces teak veneer bonded with phenol formaldehyde synthetic resin including C.C.T.W. vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and covering batten of 30 x 10 mm at 1.22 metre apart on both ways or as directed including finishing with one coat of primer etc. complete.
Sq.M.
1425.00
256.00
Sq.M.
1607.00
268.00
76
Description of Items / Specification No. Providing and fixing in position anodized extruded aluminium partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 x 60mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenolformaldehyde synthetic resin conforming to I.S.12823-1990, laminated on both sides and 5 mm thick selected quality flat glass panels fixed with aluminium glass clips 12 x 12 mm and rubber cushioning beading to glass partition as per approved drawing etc. complete. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
2630.00
432.00
60
Providing, supplying and fixing in position anodized extruded aluminium partitions with both sides laminated panels having frame made out ofaluminium extruded tubular section of size 40 mm x 65 mm with 9 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenolformaldehyde synthetic resin conforming to I.S.12823-1990, laminated on both sides, fixed with aluminium glazing clips of size 12 x 12 mm as per approved drawing etc. complete. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge. Sq.M. 3518.00 458.00
61
Providing, Supplying and fixing in position anodized extruded aluminium partition having frame made of aluminium extruded tubular section of size 65 x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to I.S.12823-1990, laminated on both sides, fixed with aluminium glazing clips of size 12 x 12mm (conical) as per drawing etc. complete. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge. Sq.M. 3850.00 458.00
77
Description of Items / Specification No. Providing and fixing sintex or equivalent partitions partly glazed made out of rigid PVC extruded hollow section BLR-53 of size 60 x 53 mm with steel reinforcement ST-27 of size 27 x 20 mm, panel in fill in approved colour of SPUF 105 plain multi chamber hollow plastic section of size 12 x 150 mm joined each other by tongue and groove interlocking system fixed by sanp fit AL-15 of size 15 x 23 bead section and clear vision plain glass 5 mm thick fixed by snap fit GL-31 of size 30 x 23 mm bead section inserted with EPDM gasket, including fixing 100 mm long expandable screws in required number with wooden plugs fixed in walls as holdfasts, remaking food the damaged surface etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
1754.00
268.00
63
Providing and fixing partition using 1.84m height and 12mm thick Prelaminated particle board (IS 12823-1990)(OSL)one side decor lamination and other side balancing white paper bonded with phenol formaldehyde synthetic resin confirmed to IS 3087-1985, including C.C.T.W vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and covering batten of 30 x 10 mm at 1.2m apart on both ways or as directed including finishing with one coat of prime coat complete. (Excluding fixtures & fastening) Spec. As directed by Engineer-In-Charge. Sq.M. 1619.00 55.00
64
Providing and fixing partition using 1.84m height and 12mm thick Prelaminated particle board (IS 12823-1990)(BSL) both side decor lamination and bonded with phenol formaldehyde synthetic resin confirmed to IS 3087-1985 including CTW vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and covering batten of 30 x 10 mm at 1.2m apart on both ways or as directed including finishing with one coat of prime coat complete. (Excluding fixtures & fastening) Spec. As directed by Engineer-In-Charge. Sq.M. 1759.00 55.00
78
Unit
WEATHER SHEDS
65 Providing and fixing in position C.C.T.W. brackets for weather shads of section 70 x 45 mm with mortise and tenon joinery at 1.2 to 1.5 metre center to center or as directed and teak wood battens of required section, including fixing three numbers of iron nut and bolts to each bracket, necessary scaffolding and two coats of painting to wood work etc. complete. Spec. As directed by Engineer-In-Charge. 66 Providing and fixing 22 B.W.G.. plain galvanized iron sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be paid separately) Spec. As directed by Engineer-In-Charge. 67 Providing Fibre reinforced plastic Weather shed, comprising of stainless FRP sheet (of IS std.) of thickness 2.5 to 3 mm with adequate reinforcement at edges moulded to the shape as per approved drawing including scaffolding, fixing with GI screws etc. complete.( with the prior permission of S.E.) Spec. As directed by Engineer-In-Charge. 68 Providing and fixing 4 mm thick plain A.C. sheets (of IS std.) on top of the weather shed including scaffolding, fixing by means of nuts and bolts or as directed etc. complete as per detailed drawing (Brackets of 70 x 45 mm to be paid separately). Spec. As directed by Engineer-In-Charge. 69 Replacing by providing and fixing 3 mm thick plain sheet glass panels to doors and windows etc., including putty etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. 432.00 55.00 Sq.M. 293.00 68.00 Sq.M. 2050.00 205.00 Sq.M. 493.00 69.00 Cu.M. 69604.00 7560.00
79
Unit
Replacing by providing and fixing 3 mm thick ribbed glass panels to doors and windows etc., including putty etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing clear / frosted glass panels 3mm thick for all size including putty, C.C.T.W. beading etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing UV proof plastic sheet panels of approved quality in required thickness of 3 mm plain, clear or any colour or obscured (lining) in lieu of glass panels to doors/windows including providing and fixing clips, putty etc. complete. (Sample to be got approved from Ex. Engineer before use) Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing Acrylic plastic sheet (of IS std.) panels of approved quality in required thickness 3 mm plain, clear or any colour or obscured linings in lieu of glass panels to doors/windows including providing and fixing clips, putty etc. complete. Spec. As directed by Engineer-In-Charge. a) b) 3mm thick 5mm thick Sq.M. Sq.M.
455.00
55.00
71
390.00
76.00
72
605.00
55.00
73
710.00 1260.00
62.00 62.00
74
Providing and fixing C.C.T.W. skirting 20 mm thick, including necessary beading, rounding, French polishing etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. Providing and fixing C.C.T.W. runner size 150 x 75 mm over partition, including rounding, fixing in the masonry where necessary beading on sides etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M.
1377.00
198.00
75
837.00
37.00
80
Description of Items / Specification No. Providing and fixing C.C.T.W. cover moulding 45 x 20 mm over doors and windows in the required shape & size as per drawing, including all mouldings and finishing with French polishing etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
R.M.
89.00
22.00
77
Providing and fixing welded mesh of _____ and 2.54 mm thick (12 gauge) to teak wood frame work as per detailed drawings or as directed, including iron fastenings, one coat of primer, scaffolding etc. complete. (Frame work of 70 x 45 mm and covering battens of 45 x 10 mm to be paid separately)
Bd. T. -38 Spec. No.:BdT.-38 Page No.501 a) b) c) d) 78 75x25mm 50x25mm 25x25mm 50x50mm Sq.M. Sq.M. Sq.M. Sq.M. 180.00 187.00 262.00 159.00 20.00 20.00 20.00 20.00
Providing and fixing ______ of 2.54 mm thick (12 gauge) to teak wood frame work as per detailed drawing or as directed including iron fastenings, one coat of primer, scaffolding etc. complete. (Frame work of 70 x 45 mm and covering battens of 45 x 10 mm to be paid separately)
Bd. T. -39 Spec. No.:BdT.-39 Page No.502 a) b) 79 25mm XPM. 20mm XPM. Sq.M. Sq.M. 140.00 168.00 18.00 18.00
Providing and fixing aluminium grill as per AL-104 section approved by AIAGMA decorative of various sizes as per detail drawing and specification etc. complete. (Prior permission to be obtained from S.E. before execution ) Spec. As directed by Engineer-In-Charge. Sq.M. 2056.00 291.00
Deleted
81
Description of Items / Specification No. Providing and fixing factory made polyvinyl chloride (PVC) Door Frame in plain colour of the size 50 x 47mmwith a wall thickness of 5mm, made out of extruded 5mm PVC sheet, mitre cut at two corners and joined with 2nos. of 150mmlong brackets of 15mmx15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mmx19mm M.S. Square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame shall be fixed to the wall using65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per specification and direction of Engineer-inCharge. Spec. As directed by Engineer-In-Charge.
Unit
R. M.
389.00
86.00
81
Providing and fixing factory made polyvinyl chloride (PVC) Door Frame in Prelaminated colour of the size 50 x 47mmwith a wall thickness of 5mm, made out of extruded 5mm PVC sheet, miter cut at two corners and joined with 2nos. of 150mmlong brackets of 15mmx15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mmx19mm M.S. Square tube of 19 gauges, EPDM rubber gasket weather seal to be provided through out the frame. The door frame shall be fixed to the wall using65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per specification and direction of Engineer-in-Charge. Spec. As directed by Engineer-In-Charge. R. M. 440.00 86.00
82
Unit
Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles & 15mm x 15mm for top& bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC C channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. complete as per drawing &direction of Engineer-incharge, Sq.M. Spec. As directed by Engineer-In-Charge. Providing and fixing 30mm thick FACTORY MADE BOTH SIDE PRELAM SOLID PANEL PVCDOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top& bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mmthick heat moulded Rajshri Prelam PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail and 115mm wide Rajshri Prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap
2700.00
387.00
83
83
Unit
insert for top rail & bottom rail. Paneling of 5mm thick both side Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive etc. complete as per manufacturers specification & drawing. direction of Engineer-in-charge, Spec. As directed by Engineer-In-Charge. Sq.M. 84 Providing and fixing 35mm thick factory made Moulded door shutter consisting of solid core single leaf Flush Door of 30mm thickness, lipped with 15mm (5mm x 3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet with 2, 4, 6 raised panel design in different plain colours on one side after routing the Moulded design on flush door & 2mm plain PVC sheet on other side using rubber adhesive on flush door &solvent cement adhesive on the PVC lipping etc. complete as per direction of Engineer-in-charge, manufacturers specification and drawing. Spec. As directed by Engineer-In-Charge. 85 Providing and fixing factory made (Poly Vinyl Chloride) PVC Chajja PVC Shed 12 mm thickness or required colour and size; design made by PVC Sheet in single piece, having smooth gradual slope curvature for easy driange of rain water and duly reinforced vertically by 5 Nos. at equal distance of 12 mm PVC Sheet and one piece of Chajja fixed with 100mmx8mm anchor fastener screws to be fixed at a gap of every 8 inches etc. complete as per direction of Engineer-in-charge and manufacture's certification and drawing. Spec. As directed by Engineer-In-Charge. Sq.M. Sq.M.
3297.00
387.00
3558.00
338.00
1672.00
275.00
84
Bd - U : Iron Work
Item No.& Item code 1 Description of Items / Specification No. Providing and fixing mild steel grill work for windows, ventilators weighing 15.00 kg per Sq.M. as per drawing, including necessary fixtures, welding and painting with one coat of anti-corrosive paint etc. complete. Unit Rate for 12-13 (in Rs) Completed Labour
Deleted
Bd. U. -1 2
Spec. No.:BdU.-1 Page No.537 Add for extra weight or deduct for less weight per kg. for fabricating such as cutting, shaping, riveting etc. mild steel for grill works including welding etc. complete. Spec. No.:BdU.-1 Page No.537 Providing and fixing mild steel grill railing weighing ___ kg per Sq.M. with C.C. teak wood hand rail of size 75 x 60 mm and sill of 75 x 25 mm for staircase, and verandah including fabricating, fixtures, erecting, painting grill work with one coat of anticorrosive paint and polishing the sill, hand rail with French polishing etc. complete. Spec. No.:BdU.-2 Page No.537 a) 15 kg. b) c) d) e) 20 kg. 25 kg. 30 kg. 35 kg.
Sq.M.
961.00
55.00
Bd. U. -1 3
Kg.
61.00
6.00
Bd. U. -2
Deleted
85
Deleted
Bd. V. -5 A)
Medium type.
a) 15mm dia.. (outer dia.. 21.32 mm & weight 1.27 kg./ Rmt..) b) 20mm dia.. (outer dia.. 26.90 mm & weight 1.64 kg./ Rmt..) c) 25mm dia.. (outer dia.. 33.70 mm & weight 2.52 kg./ Rmt..) d) 32mm dia.. (outer dia.42.40 mm & weight 3.24 kg./ Rmt..) e) 40mm dia.. (outer dia.. 48.30 mm & weight 3.73 kg./ Rmt..) R.M. R.M. R.M. R.M. R.M. 179.00 205.00 248.00 287.00 349.00 62.00 62.00 62.00 62.00 62.00
B)
Heavy type. a) 15mm dia.. (outer dia.. 21.32 mm & weight 1.50 kg./ Rmt..) b) 20mm dia.. (outer dia.. 26.90 mm & weight 1.95 kg./ Rmt..) c) 25mm dia.. (outer dia.. 33.70 mm & weight 3.50 kg./ Rmt..) d) 32mm dia.. (outer dia.42.40 mm & weight 3.93 kg./ Rmt..) e) 40mm dia.. (outer dia.. 48.30 mm & weight 4.54 kg./ Rmt..)
86
Description of Items / Specification No. f) 50mm dia.. (outer dia.. 60.30 mm & weight 6.33 kg./ Rmt..) g) 80mm dia.. (outer dia.. 88.90 mm & weight 10.31 kg./ Rmt..) h) 100mm dia.. (outer dia.114.30 mm & weight 15.15 kg./ Rmt..)
Rate for 12-13 (in Rs) Completed 444.00 739.00 1125.00 Labour 62.00 62.00 79.00
Providing and laying on walls / ceiling / floors __mm diameter approved ___ Galvanized Iron pipe having embossed at every meter the ISI mark and name of manufacturer, having__mm outer diameter and __ kilogramme per metre weight with screwed sockets, joints, and necessary galvanized iron fittings such as backnuts, elbows, bends, tees, reducers, enlargers, plugs, etc. including necessary drilling in holes in walls/slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and applying primer and two coats of oil painting including necessary scaffolding including removing existing pipe if necessary & conveying & stacking in P.W.D.. chowky or as directed etc. complete. Spec. No.:BdV.-5 Page No.551
Bd. V. -5 A)
Medium type.
a) 15mm dia.. (outer dia.. 21.32 mm & weight 1.27 kg./ Rmt..) b) 20mm dia.. (outer dia.. 26.90 mm & weight 1.64 kg./ Rmt..) c) 25mm dia.. (outer dia.. 33.70 mm & weight 2.52 kg./ Rmt..) d) 32mm dia.. (outer dia.42.40 mm & weight 3.24 kg./ Rmt..) e) 40mm dia.. (outer dia.. 48.30 mm & weight 3.73 kg./ Rmt..) f) 50mm dia.. (outer dia.. 60.30 mm & weight 5.23 kg./ Rmt..) g) 65mm dia.. (outer dia.. 74.75 mm & weight 6.95 kg./ Rmt..) h) 80mm dia.. (outer dia.. 88.90 mm & weight 8.70 kg./ Rmt..) 87 R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. 192.00 214.00 254.00 304.00 335.00 428.00 614.00 734.00 44.00 44.00 44.00 44.00 44.00 46.00 46.00 46.00
Unit
Rate for 12-13 (in Rs) Completed 255.00 254.00 298.00 335.00 390.00 436.00 857.00 1117.00 Labour 46.00 48.00 48.00 48.00 60.00 60.00 60.00 60.00
Heavy type.
a) 15mm dia.. (outer dia.. 21.32 mm & weight 1.50 kg./ Rmt..) b) 20mm dia.. (outer dia.. 26.90 mm & weight 1.95 kg./ Rmt..) c) 25mm dia.. (outer dia.. 33.70 mm & weight 3.50 kg./ Rmt..) d) 32mm dia.. (outer dia.42.40 mm & weight 3.93 kg./ Rmt..) e) 40mm dia.. (outer dia.. 48.30 mm & weight 4.54 kg./ Rmt..) f) 50mm dia.. (outer dia.. 60.30 mm & weight 6.33 kg./ Rmt..) g) 80mm dia.. (outer dia.. 88.90 mm & weight 10.31 kg./ Rmt..) h) 100mm dia.. (outer dia.114.30 mm & weight 15.15 kg./ Rmt..) R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M.
Providing and fixing in position-------------- Ultra Violet stabilized UPVC plumbing pipes of specified outer diameter required standard thickness confirming to I.S.. 4985, including necessary fittings confirming to I.S.. 7834, such as P.V.C.. bends, vees, reducers, clamps, plugs etc. necessary excavation trench, refilling, necessary drilling holes in walls / slab, and making the good the surface etc. complete. (For 10.00 Kg/Sq.cm.. pressure)( including defect liability period and bond for three years.) Spec. As directed by Engineer-In-Charge. a) 15mm. Diameter b) 20mm. Diameter c) 25mm. Diameter d) 32mm. Diameter e) 40mm. Diameter f) 50mm. Diameter h) 60mm. Diameter R.M. R.M. R.M. R.M. R.M. R.M. R.M. 46.00 56.00 76.00 91.00 106.00 122.00 148.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00
88
Description of Items / Specification No. Providing and fixing approved and tested water meter bearing I.S.I. mark with non return valve including strainer, sockets, union nut and construction ______ of required and adequate size with M.S. fabricated frame and mild steel hinged cover with locking arrangement and lock etc. complete.
Unit
Bd. V.6-7 Spec. No.:BdV.-6 & 7 Page No.553 A) with brick masonary chamber i) 15mm. diameter water meter ii) 20mm. diameter water meter iii) 25mm. diameter water meter B) without brick masonary chamber i) 15mm. diameter water meter ii) 20mm. diameter water meter iii) 25mm. diameter water meter 5 Providing and fixing ___ mm dia. screw down bib/stop tap of brass of approved quality and make, including necessary sockets, union nut, testing etc. complete. Spec. No.:BdV.-8 Page No.554 a ) 15mm. Diameter b) 20mm. Diameter c) 25mm. Diameter 6 Providing and fixing ------mm.dia. screw down wheeled stop tap of steel with chromium plating of approved quality and make bearing I.S.I. mark, including sockets, union nut complete. Spec. No.:BdV.-9 Page No.555 a) 15mm. Diameter b) 20mm. Diameter c) 25mm. Diameter d) 32mm. Diameter e) 40mm. Diameter f) 50mm. Diameter g) 65mm. Diameter h) 80mm. Diameter 89 No. No. No. No. No. No. No. No. 219.00 294.00 390.00 430.00 556.00 617.00 667.00 705.00 33.00 33.00 37.00 40.00 43.00 46.00 48.00 49.00 No. No. No. 200.00 251.00 367.00 33.00 33.00 33.00 No. No. No. 1625.00 2213.00 2768.00 127.00 127.00 150.00 No. No. No. 2952.00 3598.00 4338.00 127.00 127.00 156.00
Bd. V. -8
Bd. V. -9
Unit
Providing and fixing ___ steel with chromium plating stop tap of approved quality and make with clutch/ wheel including sockets/ union nut and brick masonry chamber with cast iron-frame and mild steel hinged cover with locking arrangement and lock etc. complete. Bd. V. -10 Spec. No.:BdV.-10 Page No.555 a) 15mm. Diameter b) 20mm. Diameter c) 25mm. Diameter Providing and fixing brass stop tap of approved quality and make with crutch/ wheel including sockets/ union nut and brick masonry chamber with cast iron-frame and mild steel hinged cover with locking arrangement and lock etc. complete. Bd. V. -11 Spec. No.:BdV.-11 Page No.555 a) 15mm. Diameter b) 20mm. Diameter c) 25mm. Diameter Providing and fixing 15 mm diameter concussion push button typesteel with chromium plating self closing tap of approved make and quality, including necessary socket, testing etc. complete. Bd. V. -14 Spec. No.:BdV.-14 Page No.557 Providing and fixing half turn 25 mm dia. steel with chromium plating flushing cock including necessary fitting etc. complete. Bd. V. ---- Spec.. As directed by Engineer-in-charge Providing and fixing fittings and accessories such as ball cock, overflow pipe with mosquito proof coupling, scour, pipe with plug, manhole with cover and locking arrangement, connecting pipes and embedding intake and outflow pipes into the R.C.C water reservior etc. complete. Bd. V. -18 Spec. No.:BdV.-18 Page No.558 11 10 9 8 No. No. No. 1131.00 1155.00 1195.00 33.00 33.00 33.00
No.
239.00
54.00
No.
150.00
26.00
No.
1229.00
664.00
90
Description of Items / Specification No. Providing and fixing 45 cm wide steel ladder of 40 x 6 mm mild steel flat stringers and steps of 18 mm diameter mild steel bar including fixing it in M-15 cement concrete block 60 x 30 x30cm and painting the ladder with antirust primer and 2 coats of oil paint etc. complete.
Unit
Bd. V. -19 Spec. No.:BdV.-19 Page No.559 13 Providing and fixing Indian type white glazed earthenware 625 mm water closet pan including "P" trap, white earthenware foot rests, Cast Iron soil and vent pipes upto the outside face of the wall including 100 mm. diameter cast iron plug bend, cement concrete bedding, 10 litres fibre/UPVC high level flushing cistern of approved quality and make with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm. diameter UPVC flush pipe with fittings and clamps, 20 mm diameter galvanised iron overflow pipe with mosquito proof coupling, galvanised iron chain and pull, painting to the cistern and exposed pipes and cutting and making good the walls and floors etc. complete. (Exclusing waterproof brick bat coba)
R.M.
674.00
180.00
Bd. V. -20 Spec. No.:BdV.-20 Page No.559 14 Renewing Indian type white glazed earthenware 625 mm water closet pan with 'P' trap including cement concrete bedding and making good the damages, making connections to watersupply and drainage and making good the defeciencies if any complete. Spec. As directed by Engineer-In-Charge.
No.
5259.00
1264.00
No.
1441.00
443.00
91
Description of Items / Specification No. Providing and fixing Orissa type ____ (of IS Std.) earthenware 625 x 450 mm water closet pan including "P" trap, Cast Iron soil and vent pipes upto the outside face of the wall including 100 mm. diameter cast iron plug bend, cement concrete bedding, 10 litres capacity UPVC /Fibre flushing cistern of approved quality and make with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter UPVC flush pipe with fittings and clamps, 20 mm diameter galvanised iron overflow pipe with mosquito proof coupling, galvanised iron chain and pull, painting to the cistern and exposed pipes and cutting and making good the walls and floors etc. complete. Spec. As directed by Engineer-In-Charge. Coloured glazed first class a) with flushing cistern & B.B.Coba. b) without flushing cistern & B.B.Coba.
Unit
A)
No. No.
6428.00 4035.00
966.00 634.00
B)
White glazed first class a) with flushing cistern & B.B. coba. b) without flushing cistern & B.B. Coba. No. No. 6431.00 5192.00 902.00 581.00
16
Providing and fixing European type white glazed (of IS Std.) earthenware water closet pan with Bekelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC soil/vent pipe upto the outside face of wall, 10 litre enamelled low level flushing cistern with fittings, pipe and stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm dia. UPVC overflow pipe, mosquito proof couplings, G.I. chain and pulley, cutting and making good to the walls and floors, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge. No. 4345.00 1012.00
92
Description of Items / Specification No. Providing and fixing European type white glazed (as per IS Std.) earthenware water closet pan with Bekelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC, soil/vent pipes upto outside face of-the walls, 10 litre fibre low level tank flushing cistern with fittings, pipes and stop tap, brackets for fixing the cistern 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm dia. UPVC overflow pipe with mosquito proof coupling galvanised iron chain and pulley painting of the cistern and exposed pipes and cutting and making good to the wall and floor, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary be fore use.) Spec. As directed by Engineer-In-Charge.
Unit
No.
4207.00
950.00
18
Providing and fixing European type coloured glazed (as per IS Std.) earthenware water closet pan with Bekelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC soil and vent pipe upto the outside face of wall, 10 litre UPVC low level tank flushing cistern, 32 mm. dia. UPVC flush pipe with fittings, and clamps 20 mm dia. UPVC over flow pipe with mosquito proof couplings, pointing to exposed pipe and cutting and making good to the wall and floor testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge. No. 4638.00 1011.00
19
Providing and fixing European type white glazed (as per IS Std.) earthernware coupled closet with syphonic trap with syphonic low level 10 litres White Glazed cistern with black bakelite seat and lid with chromium plated brass hinges including UPVC soil and white glazed vent pipe upto the outside face of the wall including 100 mm- dia. UPVC plug bend, inlet pipe, stop tap etc. all fittings, cutting and making good to the walls and floor, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge. 93 No. 8623.00 799.00
Description of Items / Specification No. Providing and fixing "Anglo Indian type" white glazed (as per IS Std.) earthenware water closet pan with bekelite seat and lead with chromium plated brass hinges including uPVC soil and vent pipe upto the outside face of the wall and 100 mm dia. UPVC plug bend, 10 litre UPVC low level flushing cistern, 32 mm dia. UPVC flush pipe with fittings and clamps,20 mm dia. UPVC over flow pipe with mosquito proof coupling, G.I.chain and pulley painting of cistern and exposed pipe and cutting and making good to the walls and floor, testing etc. complete. (Prior approval of sample and brand, by Ex. Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge.
Unit
No.
3927.00
967.00
21
Providing and fixing "Anglo Indian type" (IS Std.) Orissa Pattern white glazed water closet pan with backelite seat and lid with chromium plated brass hinges including UPVC soil and vent pipe upto the outside face of the wall and 100 mm dia.uPVC plug bend, 10 litre UPVC low level flushing cistern, 32 mm dia. UPVC flush pipe with fittings and clamps,20 mm dia. UPVC over flow pipe with mosquito proof coupling, G.I.chain and pulley painting of cistern and exposed pipe and cutting and making good to the walls and floor, testing etc. complete. (Prior approval of sample and brand, by Ex. Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge. No. 4246.00 967.00
22
Providing and fixing _____ earthenware full stall type Urinal without flushing cistern with inlet pipes, uPVC flush pipe, stop tap 32 mm dia. with fittings,uPVC soil pipe,uPVC trap and soil pipe connection upto the outside face of the wall, making good to damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) (One full stall urinal)
Bd. V. -23 Spec. No.:BdV.-23 Page No.562 a) Coloured glazed b) White glazed No. No. 6758.00 4575.00 476.00 359.00
94
Description of Items / Specification No. Providing and fixing _____ earthenware full stall type Urinal without flushing cistern with inlet pipes, UPVC flush pipe, stop tap 32 mm dia. with fittings, UPVC soil pipe, UPVC trap and soil pipe connection upto the outside face of the wall, making good to damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) (Two full stall urinal)
Unit
Bd. V. -23 Spec. No.:BdV.-23 Page No.562 a) Coloured glazed b) White glazed 24 Providing and fixing ___ earthenware semi stall type urinals (of IS Std.) without cistern, with inlet pipes stop tap, UUPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge. a) Coloured glazed b) White glazed 25 Providing and fixing of approved quality and make white glazed earthenware lipped flat back type urinal with Fibre/UPVC 5 litres capacity flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm. diameter UPVC heavy type flush pipe with fittings etc. complete. No. 2624.00 756.00 No. No. 3175.00 2082.00 550.00 550.00 No. No. 10966.00 7677.00 1146.00 1146.00
Bd. V. -26 Spec. No.:BdV.-26 Page No.564 26 Providing and fixing of approved quality and make group of two white glazed earthenware lipped flat back type urinal with Fibre/UPVC 5 litres capacity flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm. diameter UPVC flush pipe with fittings etc. complete.
No.
3026.00
882.00
Description of Items / Specification No. Providing and fixing ___ earthenware Wash Hand Basin of ____ size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPVC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.
Unit
Bd. V. -30 Spec. No.:BdV.-30 Page No.565 A) White glazed with bottle trap a) 45x30 cm. b) 55x40 cm. c) 63x45 cm. B) Coloured glazed with bottle trap a) 45x30 cm. b) 55x40 cm. c) 63x45 cm. 28 Providing and fixing ______ pedestal for Wash Hand Basin of approved size and quality testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge. a) White glazed b) Coloured glazed 29 Providing and fixing of approved quality and make white glazed earthenware sink of size________ including all connections of the G.I. supply and UPVC waste pipe and trap upto the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap, making good the damaged surface, chromium plated bottle trap testing etc. complete. a) 600x450x200 mm. b) 450x300x200 mm. No. No. 2424.00 2135.00 562.00 559.00 No. No. 1016.00 1351.00 48.00 48.00 No. No. No. 2017.00 2438.00 2589.00 558.00 558.00 558.00 No. No. No. 1754.00 2354.00 2438.00 726.00 562.00 562.00
96
Description of Items / Specification No. Providing and fixing Steel sink of size ................ including all connections of G.I.supply and UPVC waste pipe and trap upto outside face of wall, cold water chromium plated screw down bib tap, rolled steel or C.I.brackets, rubber plug and brass chain, stop tap, making good the damaged surface, chromium plated bottle trap testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)
Unit
Bd. V. -31 Spec. No.:BdV.-31 Page No.566 a) 60x45x25 cm. b) 40x30x25 cm. Providing and fixing 10 cm dia. C.I.Nahani Trap (long arm) including symet grating,bend, connecting piece of C.I.pipe upto the outside face of the wall, making good the damaged surface, testing etc. complete. Bd. V. -32 Spec. No.:BdV.-32 Page No.567 32 Providing and fixing 10 cm dia. PVC Nahani Trap fixed with PVC grating, PVC plug bend and piece of PVC pipe upto plug bend, scaffolding etc. complete. No. 444.00 187.00 31 No. No. 5186.00 4300.00 554.00 554.00
No.
617.00
187.00
Bd. V. -32 Spec. No.:BdV.-32 Page No.567 Providing and laying 100 mm dia. half round white glazed earthenware pipes in cement concrete 1:5:10 bedding including bends, giving necessary slope, pointing, making good the damaged surface testing etc. complete. Bd. V. -29 Spec. No.:BdV.-29 Page No.565 Providing and laying saltglazed stone ware pipe of ____ mm diameter including fittings such as bends, tees, single junction, double junction, laying, jointing including excavation and refilling trenches etc. complete. Bd. V. -39 Spec. No.:BdV.-39 Page No.573 a) 100 mm. b) 150 mm. c) 225 mm. 34 33
R.M.
687.00
75.00
97
Description of Items / Specification No. Providing and fixing 75 mm dia. cast iron Rain Water Pipes with lugs including rain water receiving recess with cast iron grating, plug bend, necessary fittings such as offsets, shoe including filling joints with spun yarn soaked in bitumen and cement mortar of 1:3 proportion fixing over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls, cement concrete M-15 blocks of 30 x 30 cm in size including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of oil paint including removing the existing pipe if necessary and conveying and stacking in P.W.D. chowky or as directed etc. complete.
Unit
Bd. V. -33 Spec. No.:BdV.-33 Page No.567 36 Providing and fixing ___ diameter asbestos cement Rain Water Pipes including rain water receiving recess, caste iron grating, necessary asbestos cement fittings such as bends, shoes, pipes on walls over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick,necessary scaffolding,supported on ground by cement concrete M-15 block of 0.30m x 0.30m x0.30m or laying in ground including necessary excavation, filling the trenches,filling joints with cement morte 1:2, painting the exposed faces with two coats of paint etc.complete (including removing the existing pipe if necessary and conveying and stacking in P.W.D.chowky or as directed.)
R.M.
387.00
56.00
Bd. V. -34 Spec. No.:BdV.-34 Page No.569 a) 100 mm. b) 150 mm. R.M. R.M. 135.00 190.00 106.00 106.00
98
Description of Items / Specification No. Providing and fixing-------- diameter Cast Iron waste water pipe with necessary fixtures and fittings such as bends, tees, single junction, double junction, slotted vent offests,pipe over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on wall, supported on ground by cement concrete M-15 block of 0.30m x 0.30m x 0.30m or laying in the ground including excavation, filling the trench, filling joints with cement mortar 1:2 with two coats of anticorrossive paint, scaffolding etc. complete.
Unit
Bd. V. -35 Spec. No.:BdV.-35 Page No.570 a) 75 mm. b) 100 mm. 38 Providing and fixing 100 diameter Cast Iron Soil pipes with necessary fixtures and fittings such as bends, tees, single junction, double junction, slotted vent offests, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls or laying in the ground including excavation, filling the trench, filling joints with cememt mortar 1:2 with two coats of anticorrossive paint,scaffolding etc.complete. R.M. 587.00 146.00 R.M. R.M. 450.00 508.00 145.00 145.00
Bd. V. -35 Spec. No.:BdV.-35 Page No.570 39 Providing and fixing in position unplasticized poly venyl chloride (UPVC) ultra voilet rays stabilised _______ outer diameter rain water pipe conforming to I.S. 4985 and I.S. 13592, including necessary fittings, such as UPVC grating, bends, with door, UPVC clamps, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls, horse shoes at bottom, rubber ring and making connections water tight with solvent cement including making holes in masonary concrete, redoing the same in cement mortar 1:3, curing, testing etc. complete. Spec. As directed by Engineer-In-Charge. a) 110 mm. b) 75 mm.
R.M. R.M.
616.00 561.00
90.00 88.00
Deleted
99
Description of Items / Specification No. Providing and fixing ____ approved asbestos cement vent / waste water / waste water & soil pipe with necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls,supported on ground floors cement concrete M-15 block of 0.30m x 0.30m x 0.30m, or laying in the ground including necessary excavation, refilling the trenches, filling joints with cement mortar 1:2, painting with red lead oil base coat and two coats of anticorrosive paint, testing etc. complete.
Unit
Deleted
Bd. V. -36 Spec. No.:BdV.-36 Page No.571 a) 63.50 mm. diameter vent pipe b) 75 mm.diameter waste water pipe c) 100 mm. diameter waste water & soil pipe 41 Providing and fixing ___ UPVC, Soil vent / waste SWR pipe conforming to I.S. - 13592, and I.S. 4985 to withstand continous internal hydraulic pressure of 4 kg/cm2 including necessary fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls or laying in ground including necessary excavation, laying, refilling the trench testing etc. complete. Spec. As directed by Engineer-In-Charge. a) 75 mm.diameter waste water pipe b) 90 mm. diameter waste water & soil pipe 42 Providing and fixing A.C.Slotted Cowl Dome ______ in soil pipe including necessary fitting material / adhesive etc.complete. Spec. As directed by Engineer-In-Charge. a) 75 mm.diameter b) 100 mm. diameter No. No. 51.00 93.00 26.00 26.00 R.M. R.M. 342.00 480.00 60.00 87.00 R.M. R.M. R.M. 146.00 163.00 202.00 59.00 77.00 150.00
100
Description of Items / Specification No. Providing & fixing in position UPVC, Ultra Voilet stabilised ______ outer diameter cowl dome confirming I.S. 4985 including making joints with solvent / cement etc. complete. Spec. As directed by Engineer-In-Charge. a) 75 mm. b) 90 mm. c) 110 mm.
Unit
Providing, laying concrete pipes of I.S.NP.2 class of ------------ in proper line, level and slope including, nesessary collars, testing, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench etc. complete. Bd. V. -41 Spec. No.:BdV.-41 Page No.573 a) 150 mm.diameter b) 225 mm. diameter c) 300 mm. diameter 45 Providing and constructing Brick Masonry Inspection chamber _____ and 45 to 90 cm in depth including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, brick masonry, plastering from inside and outside as required in cement mortar 1:3 and airtight RCC lid with frame fixed in cement concrete 1:2:4, curing etc. complete. R.M. R.M. R.M. 419.00 458.00 587.00 73.00 51.00 60.00
44
Bd. V. -43 Spec. No.:BdV.-43 Page No.574 a) 60x45 cm. b) 90x45 cm. 46 Providing and constructing Brick Masonry Interseptic Chember 90 cm x 45 cm and 90 cm to 150 cm in depth including 1:4:8 cement concrete foundation, M-15 cement concrete channels, fixing salt glazed stoneware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and outside, airtight C.I.lid with frame fixed in cement concrete,curing etc.complete. No. 5686.00 567.00 No. No. 3824.00 4829.00 382.00 483.00
101
Description of Items / Specification No. Providing and fixing 15 x 10 cm of approved quality salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including symet grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with R.C.C. lid and Symet grating for the gully trap, testing etc. complete.
Unit
Bd. V. -38 Spec. No.:BdV.-38 Page No.572 Providing soak pit of size 120 x 120 x 120 cm including excavating and filling with brick bats. charcoal as per drawing etc. complete. Bd. V. -46 Spec. No.:BdV.-46 Page No.576 49 Providing and fixing 100 mm diameter. Chromium plated brass shower rose to 15 mm dia. G.I.Pipes including necessary bends and sockets etc. complete. 48
No.
931.00
53.00
No.
1008.00
293.00
Bd. V. -12 Spec. No.:BdV.-12 Page No.556 50 Providing and fixing chromium plated aluminium towel rails 20 dia. and 75 cms long of required length and approved quality fixed on teak wood plate 3" x 3/8" including providing teak wood block in the brick work etc. complete. as directed. Spec. As directed by Engineer-In-Charge. Providing and fixing chromium plated Towel Rails 75cms. long, 16mm dia. and of approved quality fixed on chromium plated bracket including providing teak wood gutties in masonry etc. complete. Spec. As directed by Engineer-In-Charge. Providing and fixing chromium plated Peg Rack____ fixed on 3" x 3/8" varnished teak wood plate 3'-0" long including fixing teak wood blocks in masonry etc. complete. Spec. As directed by Engineer-In-Charge.
No.
366.00
33.00
No.
136.00
10.00
51
No.
136.00
10.00
52
No.
--
--
Providing and fixing 450 x 550 mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Bd. V. ---- Spec. As directed by Engineer-In-Charge.
53
No.
841.00
59.00
102
Description of Items / Specification No. Providing Mirror of approved Indian quality; copper plated with 100 mm thick plywood backing and fixed in the masonry etc. complete as directed.
Unit
Bd. V. ---- Spec. As directed by Engineer-in-charge. 55 Providing and fixing Glass shelf 125 mm wide and 60 cm long with necessary chromium plated brackets, providing teak wood gutties etc. complete. Spec. As directed by Engineer-in-charge. 56 Renewing high level 10 litres ___ flushing cistern (as per IS Std.) of approved quality and make, including removing the existing tank & disconnecting & reconnecting to water supply and drainage pipes and making good the deficiencies etc. complete. Spec. As directed by Engineer-In-Charge. a) Fibre / uPVC b) C.I. flushing cistern 57 Providing and fixing--------- reinforced cement concrete cover of approved quality and make, 7.5cm thick over manhole and inspection chamber including mild steel reinforcement, curing testing etc. complete. Spec. As directed by Engineer-In-Charge. a) 1.15x0.60 Metre in size b) 1.25 Metre diametre 58 Providing hoisting and fixing in position sintex or equivalent high density polyethylene UV stabilized conforming to I.S.12701, water storage tank with necessary connections, testing & all required accessaries etc. complete. (Prior approval of sample by Ex. Engineer is necessary before use.) Spec. As directed by Engineer-In-Charge.
No.
1047.00
52.00
No.
275.00
14.00
No. No.
898.00 0.00
88.00 0.00
No. No.
697.00 924.00
99.00 99.00
Litre
9.00
1.00
103
Description of Items / Specification No. Conveying, hoisting and fixing the HDPE tanks at the terrace with all lead and lift and making necessary connections including fixing ladder as per Municipal Corporation requirement etc. complete. Spec. As directed by Engineer-In-Charge. a) up to 5000 litre capacity b) Above 5000 litre capacity
Unit
Litre Litre
2.00 2.50
1.00 1.50
60
Cleaning the Septic Tank upto 1.50 Cubic Meter capacity or equivalent etc. complete Spec. As directed by Engineer-In-Charge. Add for extra one cubical capacity of Septic tank above 1.50 Cubic Meter Capacity etc. complete. Spec. As directed by Engineer-In-Charge. Cum. 241.00 233.00 No. 1211.00 1056.00
61
Providing and fixing--------- Hume pipe septic Tank with pipe and cap including necessary excavation and laying etc.complete.
Bd. V. -45 Spec. No.:BdV.-45 Page No.575 a) 900 mm.diameter b) 1200 mm. Diameter No. No. 9339.00 13896.00 455.00 562.00
104
Bd - W :Miscellaneous
Item No.& Item code Description of Items / Specification No. GUNITING Providing and applying two coat of anticorrosive polymer "Rust-remover" of approved quality coating to the steel surface by exposing the reinforcement, removing dust, only residue and existing paint if any thorughly and washing the surface with water etc.complete as directed. Spec. As directed by Engineer-In-Charge. Unit Rate for 12-13 (in Rs) Completed Labour
Deleted
Sq.M.
115.00
14.00
Providing and applying one coat polymer based polysafe-plastone bonding chemical to concrete surface including cleaning the existing surface by grinding / wire brushing etc. complete as directed. Spec. As directed by Engineer-In-Charge. Providing and applying ________ polymer polysafe plastone or approved polymer based cement mortar 1:3 with river screened sand in all positions by using approved polymer chemical (as per IS std.) specifications and finishing the surface smooth, curing etc. complete as directed. Spec. As directed by Engineer-In-Charge. a ) 12.50 mm thick b) 25 mm thick c) 50 mm thick d) 75 mm thick ANTITERMITE & GENERAL PEST CONTROL Providing Pre-constructional Anti termite treatment by treating the bottom surface and the sides of excavation in soil with the plinth beams at the rate of 3 litres of emulsion concentrate of one percent concentration of chlorpyrifos 20% F.C. (i.e. by diluting 5 ltr. of chlorpyrifos 20% EC with 95 ltr. of water) ISI approved conforming as per I.S. 8944 & I.S. 6313 (Part II 1981) and spraying by high volume sprayer per square metre surface area with ten years guarantee bond etc.complete. Spec. As directed by Engineer-In-Charge.
Sq.M.
146.00
14.00
Sq.M.
30.00
--
105
Description of Items / Specification No. Providing exhaustive Anti termite treatment to the wooden frames by drilling 6 mm holes at four corners or as directed on one side at downward angle of 45 degree at junction of wood work and masonry and in between as instructed by Engineer as per requirement at the rate of 60 millimeter of chlorpyrifos 20% EC as per I.S. 6313 (Part III) of 1981 and filling with putty,with two years guarantee bond etc. complete. Spec. As directed by Engineer-In-Charge. Providing exhaustive Anti termite treatment to the wooden beams by injecting antitermite chemical emulsion at four corners or as directed on one side at downward angle of 45 degree at wooden joints and masonry and in between as instructed by Engineer as per requirement at the rate of 80 millimeter of chlorpyrifos 20% EC as per I.S. 6313 (Part III) of 1981,per joint as per requirement and filling with putty, with two years guarantee bond etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
No.
21.00
--
One Joint
12.00
--
Providing exhaustive Antitermite treatment to the sides of flooring by injecting one percent of chlorpyrifos 20% EC as per IS 6313 (Part III) of 1981at the rate of 50 millimeter per hole of 6 mm diameter drilled at a distance of 30 cms centre to centre or more as per requirement and sealing the same with proper filling, with two years garentee bond etc. complete. Spec. As directed by Engineer-In-Charge.
One Hole
6.20
--
Destroying Rats bandicates by putting cakes granules for destroying sq. Mt. Ratsarranging cages for catching Rats and destroying collected Rate in cages alive or dead, disposing them including throwing at the safe distance, buring etc. complete as directed. Spec. As directed by Engineer-In-Charge. Sq.M. 5.20 --
106
Description of Items / Specification No. Providing exhaustive Antitermite treatment around the periphery by excavating trenches of 20 cms. width and exposing the side of columns and plinth beams upto a depth of 300 mm by injecting one percent of chlorpyrifos 20% EC as per I.S. 6313 (Part III) of 1981,at the rate of 2.25 litres per running metre or more as per requirement with two years guarantee bond etc.complete. Spec. As directed by Engineer-In-Charge. Providing general pest control services to the building to control the nuisance of the cockcroaches, lizards, bedbugs and other insects etc. with four operations in a year and monthly check up etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Sq.M.
19.00
--
10
Sq.M.
10.00
--
11
Providing and applying oil based insecticides fogging treatment for the purpose to control cockroaches, bedbugs, mosquitoes,fligment, mots and malaria typhoid, the rate of pyrethins w/w 2% dichlorous 75% EC 5% petroleum Didtillate 93% used for fogging treatment over Garbage collections,dumping grounds,manure heaps,open gutter,open latrines night soil pits and cplony premises for control of house hold insect pests etc with two operation per month. Spec. As directed by Engineer-In-Charge. Sq.M. 8.50 --
12
Providing general pest control services to all size inspection chambers to control nuisance of the cockcroaches during the year with monthly check up etc. complete. Spec. As directed by Engineer-In-Charge.
No.
47.00
--
DISMANTLING
13 Dismantling Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves boards etc. and stacking the materials as directed with all leads and lifts complete including removing wood work below etc. complete. Sq.M. 107 37.00 35.00
Description of Items / Specification No. Dismantling and resetting Manglore tiles from roof including refixing loose battens etc. complete.
Unit
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling G.I. and A.C. sheet roof covering and stacking them as and where directed in the compound, including scaffolding etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 15
Sq.M.
23.00
23.00
Sq.M.
10.00
9.00
Dismantling G.I. and A.C. sheet roofing including purlins and rafters etc. including sorting out serviceable and unserviceable material and stacking the same as and where directed in the compound, including scaffolding etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 17 Dismantling R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound, scaffolding etc. complete for all height.
16
Sq.M.
23.00
23.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling planking from roof or ceiling and stacking them as directed with all leads and lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling queen post truss from roof and stacking the materials as directed with all leads and lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling king post truss from roof and stacking the materials as directed with all leads and lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 21 Dismantling other type of truss below 5 meter span from roof and stacking the materials as directed with all leads and lifts etc. complete. 20 19 18
M.T.
1157.00
1110.00
Sq.M.
18.00
15.00
No.
221.00
207.00
No.
181.00
166.00
No.
156.00
142.00
108
Description of Items / Specification No. Dismantling flat wooden or A.C. sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.
Unit
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 23 Dismantling the tiles, battens and dungree cloth, purlins, rafters, ridges etc. from roof sorting out serviceable and unserviceable materials and stacking the same as and where directed in the compound scaffolding etc. complete.
Sq.M.
20.00
19.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 24 Dismantling battens from roof and stacking them as directed with all leads and lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 25 Dismantling purlins from roof including stacking as directed with all leads, lifts etc. complete.
Sq.M.
40.00
37.00
R.M.
1.51
1.37
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling rafters from roof including stacking the materials as directed with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling doors and windows shutters without frame and stacking the materials as directed with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling ventilators and small window shutters without frame and stacking the materials with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 30 29 28 27 26
R.M.
2.86
2.64
R.M.
6.00
6.00
No.
74.00
68.00
No.
26.00
23.00
No.
70.00
65.00
No.
35.00
31.00
109
Unit
Dismantling wooden or A.C. partition including frame work and stacking the materials as directed with all leads. lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 32 Dismantling teak wood trellies work with frame including stacking the materials as directed with frame, all leads, lifts etc. complete.
Sq.M.
37.00
31.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling cement or lime plaster including disposing off the spoils as directed with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling teak wood panelled / partly / glazed / veneer partitions carefully without damaging the frame or panels and stacking the same as and where directed complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling cement tiles or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Dismantling Shahabad or Tandur stones from floor without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 37 Dismantling brick bat coba including stacking the spoils as directed with all leads, lifts etc. complete. 36 35 34 33
Sq.M.
19.00
18.00
Sq.M.
14.00
13.00
Sq.M.
18.00
14.00
Sq.M.
20.00
18.00
Sq.M.
19.00
16.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 38 Dismantling trap stone from floor without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.
Cu.M.
113.00
104.00
Sq.M.
39.00
36.00
110
Description of Items / Specification No. Dismantling wire fencing with wooden post and stacking the materials with all leads, lifts etc. complete.
Unit
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 40 Dismantling wire fencing with iron/cement concrete fencing posts and stacking the materials as directed with all leads, lifts etc. complete.
R.M.
2.00
1.65
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 41 Dismantling iron pipe railing having wooden R.C.C. or cement concrete or iron posts and stacking the materials as directed etc. complete.
R.M.
6.00
5.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 42 Scraping old paint from steel and other metal surface with flame, cleaning and making the surface even and scaffolding etc. complete.
R.M.
6.00
5.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 43 Scraping old paint from steel and other metal surface with hand scrapping, cleaning and making the surface even and scaffolding etc. complete.
Sq.M.
34.00
25.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 44 Removing water proofing treatment such as tarfelt etc. without causing any damages to structure from terrace including cleaning, levelling the surface, lowering down debris, refusal without causing dust nuisance and stacking the debris upto a distance of 50 m etc. complete.
Sq.M.
11.00
10.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 45 Removing existing water proofing treatment from terrace including I.P.S. / Brick Bat coba 15 to 18 cm thick without damages to structure, levelling and cleaning the surface for providing new water proofing treatment complete as directed etc. complete.
Sq.M.
7.70
6.60
Sq.M.
23.00
21.00
111
Description of Items / Specification No. Removing earthen stone ware pipes and stacking them as directed with all leads, lifts complete.
Unit
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 47 Removing cast iron or wrought iron or AC pipe and stacking them as directed with all leads, lifts etc. complete.
R.M.
5.50
3.30
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 48 Removing urinal pans or wash hand basins with frame, including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out-side. etc. complete.
R.M.
6.60
5.50
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 49 Removing W.C. pans, including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pans and removing the pan carefully and throwing out the refusal out-side etc. complete. Spec. As directed by Engineer-In-Charge. 50 Dismantling carefully the existing structure of stone masonary in cement or lime mortar, including sorting out serviceable materials and stacking the dismantled material within 50 metre lead neatly as directed etc. complete. Spec. As directed by Engineer-In-Charge. 51 Dismantling carefully the existing structure of brick masonary in cement mortar or lime mortar, including sorting out serviceable materials & stacking dismantled material within 50 meter lead as directed etc. complete. Spec. As directed by Engineer-In-Charge. 52 Dismantling carefully the existing plain concrete, including stacking the materials neatly within 50 meter lead as directed etc. complete. Spec. As directed by Engineer-In-Charge.
No.
56.00
56.00
No.
91.00
85.00
Cu.M.
90.00
86.00
Cu.M.
90.00
86.00
Cu.M.
308.00
290.00
112
Description of Items / Specification No. Dismantling R.C.C. concrete work including breaking concrete by chiselling, wedging etc. including cutting the reinforcement, stacking the serviceable materials and the debris separately upto a distance of 50 metre or spreading the debris as directed etc. complete. Spec. As directed by Engineer-In-Charge.
Unit
Cu.M.
399.00
384.00
54
Dismantling wooden floor including beams and joists, stacking the materials as directed with all leads, lifts etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. 25.00 23.00
55
Cleaning steel and concrete surface of columns, beams, ceilings etc. by compressed sand blasting including washing with pressured water including machinery, all lead, labour, scaffolding etc. complete. Spec. As directed by Engineer-In-Charge. a) by compressed sand blasting b) by manually
Sq.M. Sq.M.
121.00 64.00
43.00 51.00
56
Scraping out old white wash/colour wash by brushing and or scraping by sand paper and preparing the wall surface smooth including necessary repairs to scratches etc. complete. Spec. As directed by Engineer-In-Charge. Sq.M. 2.60 2.50
57
Scraping the old surfae with sand paper and coating it with mixture of whiting or glue and linseed oil including scaffolding etc. complete. Sq.M. 8.00 8.00
Bd. W. -8 Spec. No.:BdW.-8 Page No.587 58 Removing old paint from steel and other metal surface preparing the surface by solvent degreasing and derusting by manual scrapping, flame cleaning and chemical methods, hand scrapping, scaffolding etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 59 Cutting holes in brick masonry walls to receive ends of Girders of any size including scaffolding etc. complete.
Sq.M.
23.00
21.00
No.
23.00
22.00
Unit
Cutting holes of any size in stone masonry walls to receive ends of girders of any size and making good the damages done including scaffolding etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 Removing and Lowering the roof truss carefully without damaging the members and stacking as and where directed in the compound including scaffolding etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 62 Lowering debris of the existing water proofing treatment from the terrace by any means without causing dust nuisance and damages to structure, stacking the same as and where directed including cleaning the site etc. complete. Bd. W. -8 Spec. No.:BdW.-8 Page No.587 61
No.
35.00
34.00
No.
389.00
300.00
Cu.M.
144.00
131.00
FENCING WORK
63 Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on mild steel angles (50 x 50 x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete blocks of size 45 x 45 x 45 cm., fastening the wire and painting the mild steel angles with one coat of red lead primer and two coats of painting etc. complete. R.M. 665.00 45.00
Bd. W. -3 Spec. No.:BdW.-3 Page No.583 64 Providing and erecting chain link fencing 1.6 M. height with G.I.chain link of size 50 x 50 mm 8 guage thick and fixed 75 mm above Ground level vertical M.S. Angle of 40 x 40 x 6 mm size embedded in C.C.M-15 block of size 45 x 45 x 67 cms at 1.75 M. c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c nuts and bolts and horizontal M.S. angles at top and bottom of 25 x 25x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both sides at every corner or bends embedded in C.C.M-15 block of size 45 x 45 x 67 cms including 3 coats of oil painting etc.complete. Spec. As directed by Engineer-In-Charge. 114
Sq.M.
1330.00
113.00
Description of Items / Specification No. Providing and fixing mild steel grill gate with angle iron frame 65 x 65 x 10 mm with iron bars at 150 mm etc. centre to centre and diagonal flats as per the detailed drawing, including hinges, pivot blocks, locking arrangement, welding, reveting with oil painting in three coats of approved colour shade etc. complete. (Weight of gate 35 kg /sq.m.)
Unit
Sq.M.
2350.00
150.00
Providing and laying water proofing treatment to terrace slab with Nnilobit,Dr.fixit or equivalent mm thick APP modifiedibitumenmembrance with polyster reinforcement with over lapping of 75 mm along lengthand100 mm along width including removing the existing tarfelt treatment particles including applying bitumne based primer at 0.20 litr/sm andlaying 3 mm thick APP modified bitumen membrane coating with torching method and finishing the surface with heat reflelctive bitumen based silver paint at 0.10 Ltrs/Smt etc complete as per manufacturer specification and as directed by the Engineer in charge. ( With 7 years guarantee period)
Sq.M. Spec. No.:BdW.- Page No. Filling cracks of external walls including providing groove by grinder / cutter meking ' V ' knotch appling polymer bonding coat,filling cracks by polymer morter and finishing neatly including scaffolding etc. complete and as per instruction of engineer in charge. 752.00 126.00
Bd. W. 67
Bd. W. -
Sq.M.
45.00
23.00
115
Unit
Sq.M.
1338.00
47.00
116
Rd.1.
Excavation for roadways in soft strata such as ______ including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking, disposing as directed etc. complete. Spec. No.:Rd. 2,3,4. Page No. 180,183,184
a) b) c)
earth soil of all sorts sand, gravel or soft murum hard murum hard murum and boulders
Excavation for roadways in hard strata such as __ , including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking, disposing as directed etc. complete. Spec. No.:Rd. 5,6,7,8 Page No. 184,185,186.
a) b) c) d)
soft rock hard rock by blasting hard rock by wedging chiselling or line drilling laterite rock
117
Description of Items / Specification No. Excavation catch / side water gutters _______ to the specified section including stacking the excavated stuff in a regular bund if necessary and disposing off unsuitable or excess stuff as directed upto 50 mtr. etc. complete. Spec. No.:Rd. 9 Page No. 187 a) b) c) d) e) in all sorts of Soil in Hard murum in Hard murum & Boulder in Soft rock in Hard rock
Unit
Rd. 9.
Excavation for widening of carriageway from 3 to 5.5m / 5.50 to 7.00m width in all sorts of soils including dressing section to the required grade, camber and side slopes and conveying the excavated material with all lift upto a lead of 50m and spreading for embankment or stacking as directed etc. complete. Spec. No.:Rd. 9 Page No. 187 Preparing embankment with approved materials obtained from the cutting within a _____ including all lifts, laying in layers of 20 to 30cm. thickness, breaking clods, dressing to the required lines, curves, grade & section with normal watering and compaction etc. complete. Spec. No.:Rd. 14 Page No. 195 a) b) c) lead of 50m lead over 50m to 300m lead over 300m to 500m. Cu.M. Cu.M. Cu.M. 40.00 41.00 539.00 22.00 22.00 22.00 Cu.M. 125.00 114.00
Rd. 9. 6
Rd.14.
Watering and compacting of embankment formed of materials obtained from the road cutting, within a lead of 50m to 95% of standard proctor density after laying them in layers of 20 to 30 cm with _____ roller etc. complete. Spec. No.:Rd. 10 Page No. 187 a) b) static roller vibratory roller Cu.M. Cu.M. 40.00 52.00 24.00 24.00
Rd.10.
118
Description of Items / Specification No. Watering and compacting of embankment formed of materials obtained from the road cutting, within a lead of 50m, to 100% of standard proctor density after laying them in layers of 20 to 30 cm with _____ roller etc. complete. Spec. No.:Rd. 10 Page No. 187 a) b) static roller vibratory roller
Unit
Rd.10.
Cu.M. Cu.M.
42.00 52.00
25.00 25.00
Watering and compacting of embankment formed of materials obtained from the road cutting/Department land, within a lead of 50m, with normal watering and compaction including laying materials in layers of 20 to 30 cm with static roller etc. complete. Spec. No.:Rd. 10 Page No. 187 Providing earth work in embankment with approved materials obtained from departmental land or other sources specified by Engineer-in-charge including all lifts, laying in layers of 20 to 30cm thickness, breaking clods, dressing to the required lines, curves, grade & section, watering and compaction to ___ with ___ roller etc. complete. Spec. No.:Rd. 12 Page No. 189 a) 95% of standard proctor density i) static roller ii) vibratory roller b) 100% of standard proctor density i) static roller ii) vibratory roller Cu.M. Cu.M. 184.00 205.00 116.00 116.00 Cu.M. Cu.M. 172.00 194.00 116.00 116.00 Cu.M. 30.00 23.00
Rd.10. 10
Rd.12.
11
Providing earth work in embankment with approved materials obtained from Departmental land or other sources specified by Engineer in charge including all lifts, laying in layers of 20 to 30cm. thickness, breaking clods, dressing to the required lines, curves, grade & section, normal watering and compaction with power roller etc. complete. Spec. No.:Rd. 13 Page No. 194 119 Cu.M. 161.00 106.00
Rd.13.
Description of Items / Specification No. Providing earth work in embankment with approved materials obtained from private land including all lifts and laying in layers of 20 to 30cm thickness, breaking clods, dressing to the required lines, curves, grade & section, watering and compaction to------- with-------roller etc. complete. Spec. No.:Rd. 12 Page No. 189 a) 95% of standard proctor density i) static roller ii) vibratory roller b) 100% of standard proctor density i) static roller ii) vibratory roller
Unit
Rd.12.
Cu.M. Cu.M.
185.00 166.00
124.00 124.00
Cu.M. Cu.M.
187.00 166.00
124.00 124.00
13
Providing earth work in embankment with approved materials obtained from private land including all lifts and laying in layers of 20cm to 30cm. Thickness breaking clods dressing to the required lines, curves, grade & section, normal watering and compaction with power roller etc. complete. Spec. No.:Rd. 13 Page No. 194 Earth work in embankement with approved materials obtained from departmental land or other sources specified by Engineer in charge, including all lifts and leads laying in layers of 15 to 20 cm thickness, breaking clods, dressing to the required lines, curves, grades & section etc. complete (without watering but possible cmpaction) Spec. No.:Rd. 16 Page No. 195 Cu.M. --Cu.M. 145.00 109.00
Rd.13. 14
Rd.16
120
Unit
Rd.19.
Cu.M.
129.00
6.60
Description of Items / Specification No. Laying 15 to 23cm. trap stone rubble soling including hand packing with rubble chips etc complete.(excluding cost of materials) Spec. No.:Rd. 27 Page No. 204 Spreading gravel / hard murum /soft murum & stone dust over the rubble soling, oversize and size metal layer / blandage on W.B.M. surface etc. complete.
Unit
Rd.27. 21
Cu.M.
95.00
83.00
Rd.28,31,36. Spec. No.:Rd. 28,31,36,37 Page No.205, 206,209 22 Rd.29,34. 23 Spreading oversize 40mm / 50mm / 60mm / 80mm metal including sectioning etc. complete. Spec. No.:Rd. 29,34 Page No. 205,208 Compacting sub grade / gravel / oversize metal (200mm loose)layer 2 to 7 m wide with _____, including necessary, labour, materials and artificial watering etc. complete. Spec. No.:Rd.32 Page No.206 i) static roller (II) vibratory roller 24 Compacting sub grade / gravel / oversize metal (200mm loose)layer upto 2.00m. wide with _____, including necessary, labour, materials and artificial watering etc. complete. Spec. No.:Rd.32 Page No.206 i) static roller (II) vibratory roller 25 Rd.33. Picking the road surface including sectioning etc. complete. Spec. No.:Rd.33 Page No. 208 i) on W.B.M. surface ii) on B.T. surface iii) on murum surface 26 Compacting the size metal (100 mm loose) layer 2.00 to 7.00 m width with _____ roller, including necessary labour, materials and artificial watering etc. complete. Spec. No.:Rd.35 Page No.209 i) static roller ii) vibratory roller 122
Cu.M.
29.00
25.00
Cu.M.
52.00
37.00
Rd.32.
Sq.M. Sq.M.
14.00 18.00
3.30 3.30
Rd.32.
Sq.M. Sq.M.
14.00 18.00
3.30 3.30
Rd.35.
Sq.M. Sq.M.
13.00 15.00
3.30 3.30
Description of Items / Specification No. Compacting the size metal (100 mm loose) layer upto 2.00m width with _____ roller, including necessary labour, materials and artificial watering etc. complete. Spec. No.:Rd.35 Page No.209 i) static roller ii) vibratory roller
Unit
Rd.35.
Sq.M. Sq.M.
13.00 15.00
3.30 3.30
28
Compacting the size metal (150 mm loose) layer 2.00m to 7.00m width with ______ roller, including necessary labour, materials and artificial watering etc. complete. Spec. No.:Rd.35 Page No.209 i) static roller ii) vibratory roller Sq.M. Sq.M. 13.00 15.00 3.30 3.30
Rd.35.
29
Compacting the size metal (200 mm loose) layer upto 2.00 m width with ______ roller, including necessary labour, materials and artificial watering etc. complete. Spec. No.:Rd.35 Page No.209 i) static roller ii) vibratory roller Sq.M. Sq.M. 12.00 13.00 3.30 3.30
Rd.35.
As directed 30
Spec. - As directed by Engineer-In-Charge. Spreading hard murum / kankar on the road formation / side width. Cu.M. 22.00 20.00
Deleted Deleted
Compacting the hard murum / kankar upto 2.00 m width (200mm loose) with ______ roller including artificial watering etc. complete. Spec. No.:Rd.38 Page No.210 i) static roller ii) vibratory roller Sq.M. Sq.M. 4.50 5.50 2.20 2.20
Rd.38.
123
Description of Items / Specification No. Compacting the hard murum / kankar 2.00 to 7.00m width (200mm loose) with _______ roller including artificial watering etc. complete. Spec. No.:Rd.38 Page No.210 i) static roller ii) vibratory roller
Unit
Rd.38.
Sq.M. Sq.M.
4.50 5.50
2.20 2.20
33
Rd.40.
Compacting the hard murum side width, layer wise on each side with ______ roller including artificial watering etc. complete. Spec. No.:Rd.40 Page No.211 i) static roller ii) vibratory roller Sq.M. Sq.M. 4.50 5.50 2.20 2.20
34
Supplying------- crushed metal of trap / granite / quartzite / gneiss stone aggretage at the road side, including conveying and stacking etc. complete for use in bituminous road surface. Spec. No.:Rd.41 Page No. 215 a) b) c) d) e) f) 40 mm 25 mm 20 mm 12 mm 10 mm 6 mm Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. 540.00 593.00 606.00 611.00 611.00 459.00 48.00 48.00 48.00 48.00 48.00 48.00
Rd.41.
35
Supplying stone dust of trap stone aggregate at the road side, including conveying and stacking etc. complete for use in bituminous road surface. Spec. No.:Rd. 41 Page No.215 Refixing the disturbed guard stone in position and in line with necessary excavation, back filling, ramming etc. Complete. Spec. - As directed by Engineer-In-Charge. No. 9.45 9.45 Cu.M. 249.00 6.30
Rd.41. 36
37
Providing rain cuts over side shoulder and making arrangement for surface drainage. etc. complete. Spec. - As directed by Engineer-In-Charge. R.M. 3.30 3.15
124
Description of Items / Specification No. Providing dry Trap rubble stone pitching 23 cm thick as directed etc. complete. Spec. No.:Rd.73 Page No.246 a) b) Trap rubble Laterite rubble
Unit
Sq.M. Sq.M.
163.00 0.00
39.00 0.00
Providing dry Trap rubble stone masonry with headers etc. complete. Spec. No.:Rd.74 Page No.247 a) b) Trap rubble Laterite rubble Cu.M. Cu.M. 614.00 0.00 170.00 0.00
Providing and laying Shoulder drain of trap rubble of 0.45 X 0.45 m.section of 45 degree angle including hand packing, filling voids with sand and shingles of approved quality and ramming ect. Complete as directed Spec. - As directed by Engineer-In-Charge. Sq.M. 93.00 14.00
Rd.59. 41
Rd.43.
125
Description of Items / Specification No. Compacting 50 mm thick full grout surface with power roller including labour, use of plant etc. complete (Controlling Item.) Spec. No.:Rd.44 Page No.220 Providing 25 mm thick premix bituminous carpet of --------- including supplying all materials, preparing and cleaning the base heating bitumen , mixing hot bitumen and chips, laying the carpet layer and compacting etc. complete.(using Bulk Asphalt). Spec. No.:Rd.62 Page No.233 i) ii) 60/70 grade of bitumen 30/40 grade of bitumen
Unit
Rd.44. 43
Sq.M.
8.00
1.10
Rd.62.
Sq.M. Sq.M.
158.00 --
33.00 --
44
Laying 25 mm. thick premix bituminous carpet including and cleaning the base, heating bitumen, mixing bitumen &chips in a bitumen mixer and laying the carpet layer etc.complete. (excluding cost of stone aggregate, bitumen and compaction) Spec. No.:Rd.49 Page No.225 Compacting 25 mm thick premix bituminous carpet with power roller, including labour, use of tool and plant etc. complete controlling item. Spec. No.:Rd.50 Page No.226 Providing 25 mm thick HMHL bituminous premix carpet of ---------- including supplying all materials, preparing and cleaning the base, heating bitumen, , mixing hot bitumen and chips in drum mix plant, laying the carpet layer by paver finisher and compacting by power roller etc. complete.(using Bulk Asphalt over B.T. Surface) Spec. No.:Rd.62 Page No.233 i) ii) 60/70 grade of bitumen 30/40 grade of bitumen Sq.M. Sq.M. 159.00 -23.00 -Sq.M. 5.75 1.10 Sq.M. 19.00 14.00
Rd.49. 45
Rd.50. 46
Rd.62.
126
Description of Items / Specification No. CRMB 55 grade of bitumen (prior approval of superintending Engineer is essential) NRMB 70 grade of bitumen (prior approval of superintending Engineer is essential) PMB 70 grade of bitumen (prior approval of superintending Engineer is essential)
Providing 20 mm thick bituminous premix carpet of ------- including supplying all materials, preparing and cleaning the base, heating bitumen mixing hot bitumen and chips, laying the carpet layer and compacting etc. complete.(using Bulk Asphalt.) Spec. No.:Rd.63 Page No.233 i) ii) 60/70 grade of bitumen 30/40 grade of bitumen Sq.M. Sq.M. 129.00 0.00 23.00 0.00
Rd.63.
48
Laying 20 mm thick bituminous premixed carpet including preparing and cleaning, mixing chips in a bitumen mixer and laying the carpet etc. complete (excluding cost of seal coat / tack coat, stone aggregate, bitumen and compaction using Bulk Asphalt) Spec. No.:Rd.51 Page No.227 Compacting 20 mm thick bituminous premixed carpet with power roller, including labour, use of tool and plant etc. complete. Spec. No.:Rd.52 Page No.228 Providing 20 mm thick H.M.H.L.bituminous premixed carpet of ------including supplying all materials, preparing and cleaning the base, heating bitumen, mixing hot bitumen and chips, laying the carpet layer with / without paver finisher and compacting etc. complete. (using Bulk Asphalt.) Spec. No.:Rd.63 Page No.233 Sq.M. 4.80 1.10 Sq.M. 18.00 13.00
Rd.51. 49
Rd.52. 50
Rd.63.
A)
i) ii)
Description of Items / Specification No. CRMB 55 grade of bitumen (prior approval of superintending Engineer is essential) NRMB 70 grade of bitumen (prior approval of superintending Engineer is essential)
v) PMB 70 grade of bitumen (prior approval of superintending Engineer is essential) B) i) ii) iii) iv) v) 51 without paver finisher 60/70 grade of bitumen 30/40 grade of bitumen CRMB 55 grade of bitumen (prior approval of superintending Engineer is essential) NRMB 70 grade of bitumen (prior approval of superintending Engineer is essential) PMB 70 grade of bitumen (prior approval of superintending Engineer is essential)
------
------
Providing single coat surface dressing on _______ road surface including supplying all materials,cleaning the road surface, heating and applying bitumen,spreading chips, use of tools, plant and equipments and rolling with static roller etc.complete. (using bulk asphalt 60/70 grade) Spec. No.:Rd.64Page No.233,MoRT&H,cl.508 a) b) Over B.T. surface (bitumen @ rate of 1.00 kg / square metre.) Over W.B.M. surface (bitumen @ rate of 1.80 kg / square metre.) Sq.M. Sq.M. 72.00 103.00 23.00 23.00
Rd.64,
52
Laying single coat surface dressing including cleaning the road surface heating and applying bitumen to the road surface spreading chips etc. complete,excluding cost of rolling (using bulk asphalt). Spec. No.:Rd.53 Page No. 228 Rolling the single coat bituminous surface dressing of road with static roller including labour etc. complete. Spec. No.:Rd.54 Page No. 229 Sq.M. 4.40 1.10 Sq.M. 12.00 9.90
Rd.53 53
Rd.54
128
Description of Items / Specification No. Providing two coat Bitumen surface dressing including supplying all materials,including all leads,cleaning the road surface,spreading chips and rolling etc.complete. (using bulk asphalt 60/70 grade @ rate of 2.80 kg./ square meter.) Spec. No.:Rd.64Page No.233, MoRT&H, cl.508/2001. Laying two coat bituminous surface dressing including cleaning the road surface, heating and applying bitumen to the road surface and spreading chips etc. complete. (excluding cost of stone chips and bitumen & Rolling). Spec. No.:Rd.55 Page No. 230 Rolling two coat bituminous surface dressing with a power roller including labour use of plant etc. complete (controlling item) Spec. No.:Rd.56 Page No. 231 Providing bituminous Liquid seal coat to B.T. surface including, supplying all materials with all leads, preparing existing road surface, heating & applying bitumen, spreading chips, rolling etc. complete. (using bulk asphalt 60/70 grade @ rate of 0.98 kg / square metre) Spec. No.:Rd.66 Page No. 233 MoRT&H Cl Laying bituminous liquid seal coat to black top surface including preparing the existing road surface, heating and applying bitumen and spreading chips etc.complete excluding cost of stone chips bitumen and rolling. (using bulk asphalt). Spec. No.:Rd.57 Page No. 231 Rolling the bituminous liquid seal coat with a power roller including labour, use of plant etc. complete. Spec. No.:Rd.58 Page No. 232
Unit
Rd.65
Sq.M.
177.00
23.00
55
Rd.55 56
Sq.M.
14.00
12.00
Rd.56 57
Sq.M.
6.00
1.10
Rd.66 58
Sq.M.
62.00
9.90
Rd.57 59
Sq.M.
9.00
7.00
Rd.58
Sq.M.
3.96
0.60
129
Description of Items / Specification No. Providing and laying bituminous tack coat, @.......... by manual/mechanical sprayer including supplying all materials,preparing the existing surface, heating bitumen and applying tack coat evenly on the surface etc. complete. (using 60/70 grade) Spec. No.:MoRT&H cl.503/2001 a) b) @ 50 Kg/100 m2 over B.T.surface @ 100 Kg/100 m2 over W.B.M. surface
Unit
Sq.M. Sq.M.
27.00 53.00
7.35 9.45
61
Providing and laying Modified Penetration Macadam road surface for compected thichness of 50 mm supplying all materials, preparing the existing road surface, to recive the MPM course i.e.cleaining Existing WBM surface, spreading of 40 mm size metal layer in required thickness with compaction with power roller heating and Spraying bitumen with sprayer,spreading key aggreagates (12 mm chips) and final compation with power roller etc.complete.( using 60/70 grade of bitumen ) Spec. - As directed by Engineer-In-Charge. A) On W.B.M.surface including picking the existing surface, a) 75mm thick i) Power Roller ii) with vibratory roller b) 50mm i) Power Roller ii) vibratory roller
B)
coat @ 50 kg./ 100 Sqm, a) 75 mm thick i) Power Roller ii) with vibratory roller b) 50mm i) Power Roller
130
Description of Items / Specification No. Providing and laying hot mix hot laid bituminous macadam 50/75 mm average thickness with--bitumen by weight of total mix for levelling course to remove irregularities / Base course including diversion of traffic supply of all materials, heating bitumen and chips in drum mix plant, cleaning the road surface, laying bituminous macadam by paver finisherr including compacting with ____ roller transportation and cost of all materials, bitumen from refinery etc. complete. (excluding tack coat). Spec. No.:MoRT&H cl.504/2001 A) 2.5% Levelling course a) static roller i) 60/70 grade of bitumen ii) 30/40 grade of bitumen
Unit
Cu.M. Cu.M.
5125.00 --
68.00 --
b)
vibratory roller
Cu.M. Cu.M. 5178.00 -60.00 --
a)
static roller
Cu.M. Cu.M. 5569.00 -60.00 --
b)
vibratory roller
Cu.M. Cu.M. 5622.00 -60.00 --
i) 60/70 grade of bitumen ii) 30/40 grade of bitumen C) 3.3% Base course
a)
static roller
Cu.M. Cu.M. -----
b)
vibratory roller
Cu.M. Cu.M. -----
131
Unit
MoRT&H-803 Spec-No.-MoRT&H-803.
a) Yellow b) White 64 Providing and laying of hot applied thermoplastic compound 3.00 mm thick Yellow / White including reflectorising glass beads @250 gms.per sqm area,thickness of 3.00mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level,uniform and free from streaks and holes etc.complete with 3 years guarantee. a) Yellow b) White 65 Providing and painting centre line, dashes, arrows etc.in two coats on new / old work with ready mixedroad marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt,dust and other forein matter, demarcation at site and traffic control involved etc. complete. (10 cm in width) a) new b) old 66 Providing and painting Zebra painting of pedestrain crossing on the carriageway with approved road marking paint in two coats etc. complete.(over 10cm.wide patta) a) new b) old 132
R.M. R.M.
101.00 106.00
3.30 3.30
MoRT&H-803 Spec-No.-MoRT&H-803.
Sqm Sqm
1016.00 1064.00
3.00 2.20
MoRT&H-803 Spec-No.-MoRT&H-803.
R.M. R.M.
7.50 6.00
3.60 3.60
MoRT&H-803 Spec-No.-MoRT&H-803.
Sq.M. Sq.M.
106.05 56.00
42.00 29.00
Description of Items / Specification No. Painting 5th K.M. stone with approved enamel paint in two coats and lettering including cleaning surface etc. complete. Spec. - As directed by Engineer-In-Charge.
Unit
No.
254.00
53.00
68
69
Painting Ordinary K.M. stone with approved enamel paint in two coats and lettering including cleaning surface etc. complete. Spec. - As directed by Engineer-In-Charge. Painting Two Hundred Meter stone with approved enamel paint in two coats and lettering including cleaning surface etc. complete. Spec. - As directed by Engineer-In-Charge.
No.
187.00
49.00
No.
80.00
33.00
70
Painting Boundary stones with approved enamel paint in two coats and lettering including cleaning surface etc. complete. Spec. - As directed by Engineer-In-Charge. No. 39.00 15.00
71
Providing oil painting to the plain surface of cement plaster, wooden planks, steel sheets etc. complete in two coats with superior grade oil paints. Rate for Painting the letters as underSpec. - As directed by Engineer-In-Charge. i) For lettering upto 5 cm. height ii) For lettering 5 to 7.5 cm. height iii) For lettering 7.5 to 10 cm. height iv) For lettering 10 to 12.50 cm. height v) For plain surface. No. No. No. No. Sq.M. 3.60 4.50 6.00 6.00 52.00 1.10 1.10 1.10 1.10 12.00
72
Providing and colour washing to road side trees in 2 coats in 2 bands of white and one red band at centre of 30cm height each including preparing the surface, cost of material, conveying etc. complete. Spec. - As directed by Engineer-In-Charge. Sq.M. 16.00 12.00
73
Providing white washing the parapets of bridges, culverts and parapet and two coats of approved colour washing etc. complete. Spec. - As directed by Engineer-In-Charge. Sq.M. 15.00 5.50 Providing white washing the guard stone and two coats of approved colour washing etc. complete. Spec. - As directed by Engineer-In-Charge. 133 No. 7.70 3.30
74
Description of Items / Specification No. Breaking and removing the existing cement concrete pavement to full width, depth including lean concrete, cutting dowel bars, breaking the removed cement concrete slab pieces into 50 to 80 mm size, spreading the layer, watering and consolidation with power roller etc. complete. (IInd layer not to be more than 75mm) Spec. - As directed by Engineer-In-Charge. Dressing of side shoulder including excavation, cutting shrubs and bushes, spreading the excavated stuff and section in to the required line, level and slope etc. complete. Spec. - As directed by Engineer-In-Charge.
Unit
Cu.M.
433.00
304.00
76
Sq.M.
8.80
8.80
Rd. 69. 78
No.
2496.00
513.00
Rd. 69. 79
No.
1612.00
330.00
Rd. 69. 80
Rd. 70. 81
No.
442.00
81.00
Rd. 70.
134
Description of Items / Specification No. Providing and fixing ______ & out of 16 guage (1.6 mm) thick mild sheet painted with one coat of zinc chromate stoveing primer and two coats at white stove enamel paint and red border on front side and gray store enamel on backside symbols with cut out of red retro reflective sheeting of engineering grade, including one M.S angle post size 65 x 65 x 6.5mm, & 3.85 meter long, duly painted with synthetic enamel, alternate black and white bands of 25 mm of width including G.I.fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 x 60 x 75 cms including transportation etc.complete. IRC-67of 2001 cautionary/warning sign boards a) i) of size 90 cms.equilateral triangle ii) of size 60 cms.equilateral triangle b) mandatory/regulatory sign boards i) of size 90 cms.diametre ii) of size 60 cms.diametre Providing and fixing informatory sign boards in square and rectangular shape of any size made out of 16 Gauge (1.6mm) thick Mild Steel sheet painted with one coat of zinc chromate stoveing primer and two coats of green stove enamel paint on front side and grey stove enamel on back side and border message/symbols etc. with cutout of white retro reflective sheeting of engineering grade, including M.S. angle frame of size 35 x 35 x 3 MM and two M.S. angle iron post of size 65 x 65 x6MM , 3.65 metre long properly crossed brace with angle iron of size 50 x 50 x 5MM duly painted with alternate black and white bands of 25cm width including G.I.fixtures, fixing the board in 1:4:8 concrete block of size 60 x 60 x 75 cm including tranportation etc.complete. (The work to be executed with prior approval of Superintending Engineer.) IRC-67of 2001
Unit
83
Sq.M.
8835.00
594.00
135
Description of Items / Specification No. Providing and fixing Cautionary warning sign board having shape of equilateral triangle of 90/60 cm size made out of 16 Gauge (1.6mm) thick Aluminium sheet painted with one coat of zinc chromate stoveing primer and two coats of white stove enamel paint & red border on front side and grey stove enamel on back side symbol with cutout of red retro reflective sheeting of engineering grade, including one M.S. angle post of size 65 x 65 x 6 MM, 3.65 M long duly painted with synthetic enamel paint alternate black and white band of 25 cm of including G.I.fixtures,fixing the board in 1:4:8 concrete block of size 60 x 60 x 75 cm including tranportation etc.complete. (The work to be executed with prior approval of Superintending Engineer.) IRC-67of 2001 i) ii) Size 90 cm Triangle Size 60 cm Triangle
Unit
No. No.
4257.00 3738.00
332.00 332.00
85
A) Providing and fixing with apex point upward prepared on fibre reinforced plate 3.0 milimetre thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retoreflective white back ground and red border and back side gray, retroreflective symbols, letters, numerals, arrows, one M.S.angle post of 65 x 65 x 6 milimetre size and 3.65 metre long, inflated bottom and drilled on top,and painting posts with white & black border of 25 centimetres,fitting board to post with 2 numbers of strong G.I.bolts and nuts including transportation & fixing in p.c.c.1:4:8 etc. complete. (The work to be executed with prior approval of Superintending Engineer.) IRC-67of 2001
a) (i)Cautionary sign boards 90cm.equilateral triangle
(ii) High intenc ity grade b) (i) Informatory sign boards of size 60x80 cm. (ii) High intencity grade
c) (i) Prohibitory sign boards having size 60cm. Circular
-------
136
Description of Items / Specification No. Providing & fixing Road junction / Information sign boards of size _____ prepared fibre reinforced plate 4.0 milimetre thick on frame of 40 x 40 mm angle with support of 40 mm m.s. patti of 6.00 mm thick for strengthening including bonded with blue retroreflective sheeting of Engineering grade having preasure sensitive/heat activated adhesive retroreflective with as per directed colour with retroreflective symbols, letter, numbers, arrows with two m.s. angle post of 65 x 65 x 6 mm size and 3.65 metre long in one pieces with out joint inflow at bottom and drilled on top with bracing of 40 x 40 x 5 mm m.s. angle and painting with white and black border of 25 mm., fixing boards on post with including transporation fixing in 1:4:8 cement concrete block of 60 x 60 x 75 cm. size at site etc. complete. (The work to be executed with prior approval of Superintending Engineer.) IRC-67of 2001 i) a) Board size 1.20 x 0.90 metre. b) High intensity grade ii) a) Board size 1.80 x 0.90 metre. b) High intensity grade
Unit
-----
MoRT&H-401
137
Description of Items / Specification No. Providing and laying granular subbase (GSB) of compacted thickness of 150mm in two layers, each layer not exceeding 75mm compacted thickness with specified graded gravel in subbase course, including conveying all material, labour, machineryl to the site of work,spreading specified graded gravel in uniform layers on prepared surface,watering and compacting with static and vibratory roller etc.complete. Spec-No. - As directed by Engineer-in-charge. Providing and laying in situ Dry lean cement concrete sub-base of trap metal of specified gradation using ,mixing as per approved design mix, compacting with vibratory roller of minimum 80100KN static weight to give desired compacted density,providing construction joints,and curing with liquid curing compound and sprikling water, and covering with moist hessain or ponding of water for 7days including all materials,labour,machinery with all leads and lifts,bailing out water manually,and formwork etc complete.
Unit
MoRT&H-401
Cum.
--
--
89
Cum.
3160.00
469.00
138
Description of Items / Specification No. Providing and laying Pavement Quality Concrete of M-20 grade (cast in situ) of trap metal including providing 125 micron thick impermeable plastic sheet membrane over the surface to be covered,coarse and fine aggregates of specified gradation using minimum cement content of 350 kg/cum., approved admixtures, mixing as per the design mix to the specified workability, providing necessary side forms, rails and guidewires, transporting the mix with transit mixers and laying and spreading within fixed form by mechanical auger and compacting with plate vibrator and minimum ten needle vibrators curing with approved resin based aluminised reflective curing compound and covering with moist hessian or ponding and sprinkling of water for a minimum period of 14 days, fixing dowels, tie-bars, cutting joints, joint-fillers, sealants and all types of joints and finishing to the desired surface texture including all material, labour, machinery with all leads and lifts etc complete.(Prior permission of S.E. is essential ) Spec. As directed by Engineer-in-charge. a) without flyash. b) with flyash.
Unit
MoRT&H-602
Cum. Cum.
5708.00 4945.00
651.00 651.00
91
Spec. - As directed by Engineer-In-Charge. Providing and laying in situ cement concrete road pavement of -----grade,including supplying all materials, providing steel form work, compaction by plate vibrator, providing joints at every thirty meters internal and filling the joints with bitumen,curing etc.complete. (Excluding cost of reinforcement) (Newly laid concrete shall be covered by gunny bag/plastic sheet/tarpaulin etc. for curing period complete.)
Deleted
Spec. - As directed by Engineer-In-Charge. I) Using Concrete Mixer a) M-20 b) M-25 c) M-30 d) M-35 139 Cu.M. Cu.M. Cu.M. Cu.M. 4320.00 4627.00 4810.00 4933.00 459.00 459.00 459.00 459.00
Unit
MoRT&H-601
93
MoRT&H-601
140
BRIDGE WORKS.
Item No.& Item code Description of Items / Specification No. Unit Rate for 12-13 (in Rs) Completed Labour
Br - FOUNDATION
1 Dismentling carefully the old structure -------------------- including cutting reinforcement steel bars, sorting out serviceable materials and stacking, disposing off unserviceable material, upto lead of 50m etc. Complete. Spec. No. BR-2 Page No.100 a) Reinforced Cement Concrete b) Plain Cement Concrete c) Stone Masonry in Lime or Cement Morter d) R.C.C.pipe drain,only pipes.up to 900 mm. Dia. e) R.C.C.pipe drain,only pipes. 900mm.to 1200mm. Dia. 2 Excavation for foundation ----------- including shoring and strutting as necessary and disposing off excavated stuff excluding dewatering if seperately provided,as directed etc. complete (for depth upto 1.50 M.) Spec. No. BR-3 Page No.102 a) earth, soils of all types, sand gravel b) hard murum c) hard murum & boulders d) In Soft rock e) In Hard rock by blasting f) Hard rock by Chiselling & Wedging. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. 122.00 139.00 154.00 320.00 537.00 787.00 109.00 131.00 149.00 300.00 484.00 691.00 Cu.M. Cu.M. Cu.M. R.M. R.M. 395.00 335.00 320.00 131.00 262.00 323.00 271.00 297.00 123.00 248.00
BR-2
BR-3
141
Description of Items / Specification No. Dewatering for ---(a/b/c/d/e)--- in---(i/ii/iii)--including diversion of stream providing cofferdam, bunds etc. as may be necessary for foundation and other parts of work and bailing out and / or pumping out water below the actual initial natural water level during execution of all items of construction as required (from start of that particular component till completion of bridge) including all leads and lifts etc. Complete Note: All items of construction i.e.excavation, bedding, (soling & PCC ) and concreting of that structure upto natural water level. Spec. No. BR-4 Page No.103 ( i ) other soil a) Abutment b) Returns c) Piers d) Raft, Cut of Walls e) Toe Wall, Apron (ii) Sandy soil a) Abutment b) Returns c) Piers d) Raft, Cut of Walls e) Toe Wall, Apron (iii) Perennial River or Stream a) Abutment b) Returns c) Piers d) Raft, Cut of Walls e) Toe Wall, Apron
Unit
BR-4
142
Description of Items / Specification No. Dewatering on BHP basis by using water pump---i/ii/iii---including diversion of streams, providing earthen bunds coffer dam etc. as may be necessary for foundation and other parts of the work and bailing out and pumping out water, during and after excavation as required (The item include dewatering for excavation upto foundation level, filling foundation and sub structure masonry above water level)( Prior approval of S.E.is necessary ) Spec. No. BR-4 Page No.104-105 ( i )By using 3 Horse power pump. ( ii )By using 5 to 9 Horse power pump. ( iii )By using 10 to 19 Horse power pump.
Unit
BR-4
i)Providing & laying in situ-------cement concrete of trap/granite/quartzite/gneiss metal in foundation including necessary bailing out water, compacting and curing (excluding dewatering by pump).
Deleted
BR-5
Spec. No. BR-5 Page No.105 & MoRT&Hcl.1500,1700 & 2100 Span length less than 30 mtr.
Description of Items / Specification No. II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length more than 30 mtr. a)PCCM-25 b)PCCM-30
Unit
Cu.M. Cu.M.
3638.00 4043.00
48.00 34.00
Providing uncoursed rubble trap / graninte / quartize / gneiss stone masonry in cement mortar 1:5 for foundation of piers, abutments, wings etc complete including bailing out water striking joints and watering complete. Spec. No. BR-6 Page No.107 Providing & laying in situ ------------ controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. (excluding reinforcement). Spec. No. BR-5 Page No.105 & MoRT&H cl.1500,1700&2100 Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 Cu.M. Cu.M. 5043.00 5061.00 335.00 335.00 Cu.M. Cu.M. 4899.00 5019.00 335.00 335.00 Cu.M. 2463.00 702.00
BR-6 6
BR-5
Prividing and fixing pressure relief pipes of 100 mm diametre of _______ as per drawing for R.C.C Raft, galaries etc complete. Spec. As directed by Engineer-In-Charge. a) AC b) PVC R.M. R.M. 108.00 108.00 52.00 52.00
144
Description of Items / Specification No. Providing and laying in situ controlled cement concrete------- grade of trap metal for annular filling around abutment piers for foundation including necessary bailing out water, compacting, curing etc. complete (excluding dewatering by pump & formwork) Spec. No. BR-5 Page No.105,MoRT&H1500,1700&2100 Span length less than 30 mtr. a)PCCM-10 b)PCCM-15 Span length more than 30 mtr. c)PCCM-25 d)PCCM-30
Unit
BR-5
Cu.M. Cu.M.
3290.00 3776.00
287.00 393.00
Cu.M. Cu.M.
4700.00 4742.00
393.00 393.00
Providing Island for ------------------- laying steel curbs for cutting edge of wells for depth upto 3 m for standing water including supplying earth / murum/ within 50 m head lead in river / creek including necessary caging for protection etc complete. Spec.No. MoRT&H-1200 a) 4 M dia well b) c) d) 6 M dia well 8 M dia well 10 M dia well No. No. No. No. 45492.00 59812.00 83869.00 105480.00 10377.00 10377.00 10377.00 10377.00
10
Providing fabricating, launching, floating and grounding in position steel curbs for wells with necessary steel bracings and steel cutting edges as shown in the detailed drawings etc. Complete as directed by Engineer in charge. Spec. No. BR-8 Page No.108 Providing fabricating and setting out mild steel cutting edges for reinforced cement concrete well curbs as shown on the detailed drawings etc. Complete Spec. No. As directed by Engineer in charge 145 M.T. 67165.00 7967.00
BR-8 11
M.T.
62230.00
3460.00
Description of Items / Specification No. Providing steel anchor dowell at base of the well including drilling holes up to 2.50m.depth in rock placing the dowells in position and effectively grouting the holes (4no.of 32mm.dia.steel rod of 4 m. each ) etc. complete Spec. No. BR-16 Page No.120 Providing steel anchor dowell bar including drilling holes of 75mm dia. (one no.) in rock placing the dowell in position and effectively grouting the hole 32 mm dia anchor steel rod including taking out the removable M.S. Pipe etc. complete. Spec. - As directed by Engineer-In-Charge.
Unit
BR-16 13
No.
5455.00
435.00
R.M.
1232.00
81.00
14
Providing steel anchor dowell bars including drilling holes of 75mm dia. (one no) in rock placing the dowell in position and effectively grouting the hole 32mm dia.anchor steel rod with M.S. Pipe left inside etc. complete. Spec. - As directed by Engineer-In-Charge. Providing steel anchor dowells through steining of the well, at the base of the well in position and including drilling holes upto 2.5 mt. depth in rock effectively grouting the holes (4 no.of 32 mm diameter steel bar 4 m each) etc.complete Spec. No. BR-16 Page No.120 Providing and laying in situ cement concrete grade -------- of trap metal in the hollow of the steel curb including compaction by vibrating & curing etc. complete. Spec. No. BR-9 Page No.109 a)PCC M-10 b)PCC M-15 c)PCC M-20 Cu.M. Cu.M. Cu.M. 3188.00 3575.00 3720.00 514.00 514.00 514.00 No. 7292.00 1034.00 R.M. 1518.00 77.00
BR-16 15
BR-16 16
BR-9
146
Description of Items / Specification No. Providing & laying in -------- of trap / granite / quartzite / gneiss metal for R.C.C.well curbs including necessary compacting by vibrating,finishing and curing etc. complete. (excluding reinforcement and including shuttering) Spec. No. BR-12 Page No.112,MoRT&H1200,1500&1700 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35
Unit
BR-12
18
BR-13
Providing and laying in situ cement concrete------trap / granite/quartzite/gneiss metal in well steining including shuttering compacting by vibrating, rodding finishing and curing etc. complete (excluding reinforcement) Spec. No. BR-13 Page No.112,MoRT&H1200,1500&1700 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 Cu.M. Cu.M. 5023.00 5060.00 335.00 335.00 Cu.M. Cu.M. 4662.00 4890.00 335.00 335.00
147
Description of Items / Specification No. II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35
Unit
Cu.M. Cu.M.
4809.00 5039.00
40.00 40.00
Cu.M. Cu.M.
5212.00 5486.00
40.00 40.00
19
Providing and laying in situ -------- trap / granite / quartizite / gneiss metal for the bottom plugs of wells in the dry or under water including compation by vibrating and curing wherever necessary etc complete Spec. No. BR-17 Page No.120,MoRT&H1200,1500&1700. a)PCC M-10 b)PCC M-15 c)PCC M-20 d)PC M-25 e)PCC M-30 f)PCC M-35 Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. 3638.00 4386.00 4731.00 5115.00 5316.00 5428.00 335.00 335.00 335.00 335.00 335.00 335.00
BR-17
20
Providing and filling in well with single and sand including compacting between the top and bottom plugs etc. Complete
Spec. No. BR-18 Page No.122, MoRT&H-304
BR-18 21
Cu.M.
624.00
141.00
BR-19
Providing and laying in situ-------- of trap/granite/quartzite/ gniess metal for top plug of wells including compaction by vibration and curing etc complete Spec. No. BR-19 Page No.123,MoRT&H1200,1500&1700 a)PCC M-10 b)PCC M-15 c)PCC M-20 d)PCC M-25 e)PCC M-30 f)PCC M-35 148 Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. 3530.00 3991.00 4317.00 4462.00 4930.00 5019.00 335.00 335.00 335.00 335.00 335.00 335.00
Description of Items / Specification No. Providing and laying in situ------- of trap/granite / quartzite / gniess metal for reinforced cement concrete well / pile caps including necessary formwork compaction by vibrating finishing and curing etc. complete. (Excluding reinforcement) Spec. No. BR-24 Page No.124,MoRT&H1200,1500&1700 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35
Unit
BR-24
Cu.M. Cu.M.
4885.00 5269.00
320.00 320.00
Cu.M. Cu.M.
5464.00 5533.00
320.00 320.00
Cu.M. Cu.M.
5030.00 5416.00
40.00 40.00
Cu.M. Cu.M.
5609.00 5682.00
40.00 40.00
149
Description of Items / Specification No. Sinking of------------- for foundation in soft strata/ boulders etc. which can be removed by grabing and chiselling soft disintegrated rock which requires special efforts, including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic tools and all materials available to sink through such strata including removal of obstacles and use of necessary plant & machinery, driver etc complete and proper setting of wells including all methods except pneumatic sinking (depth 0 to 5 Metres). 1. For 5 m. to 10 m. depth 30% extra over basic rate. 2. For 10 m. to 15 m.depth 40% extra over basic rate. 3. For 15 m. to 20 m.depth 60% extra over basic rate. 4. For 20 m.to 25 m.depth 100% extra over basic rate. 5. For 25 m. to 30 m.depth 220% extra over basic rate. 6. For 30 m. to 35 m.depth 390% extra over basic rate. 7. For 35 m. to 40 m.depth 690% extra over basic rate. 8. For 40 m. to 45 m.depth 1100% over basic rate. Spec. No. BR-14 Page No.113,MoRT&Hsec.1200 a) b) c) d) e) f) 4 m dia well 5 m dia well 6 m dia well 7 m dia well 8 m dia well 10 m dia well
Unit
BR-14
150
Description of Items / Specification No. Providing & laying in situ---------Controlled reinforced cement concrete of trap/granite/quartzite/ gneiss metal for cut of walls including formwork,scaffolding, compaction by vibrating, finishing, curing etc complete. (excluding reinforcement). Spec. No. BR-5 Page No.105 Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35
Unit
BR-5
Cu.M. Cu.M.
3766.00 4373.00
368.00 368.00
Cu.M. Cu.M.
3923.00 4566.00
368.00 368.00
25
Providing and laying in position rubble stone of approved size for appron etc. complete as directed by Egineer in Charge.
Spec.No.BR-57 Page No.151,MoRT&H-2503
BR-57 26
Cu.m.
652.00
166.00
BR-21
Providing M-30 R.C.C. cast in situ-----------bored piles each of load capacity as per design and of specified diametre or as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shell, Chipping dressing of R.C.C. piles cleaning the reinforcement etc. complete. Spec. No. BR-21, Page 124,MoRT&H1100&1700. a) 450 mm dia b) 475 mm dia c) 500 mm dia d) 525 mm dia e) 550 mm dia f) 600 mm dia g) 625 mm dia R.M. R.M. R.M. R.M. R.M. R.M. R.M.
151
Description of Items / Specification No. h) 650 mm dia I) 750 mm dia j) 800 mm dia k) 825 mm dia l) 900 mm dia n) 975 mm dia m) 1000 mm dia o) 1050 mm dia p) 1100 mm dia q) 1200 mm dia r) 1500 mm dia
Unit R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M.
3007.00 3542.00 3843.00 4016.00 5094.00 5511.00 6026.00 6625.00 7374.00 8733.00 12614.00
525.00 611.00 661.00 686.00 766.00 855.00 886.00 948.00 949.00 1161.00 1665.00
27
Providing M-35 R.C.C. cast in situ bored piles each of load capacity as per design and of specified diametre or as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shell chipping, dressing of R.C.C. piles cleaning the reinforcement etc. complete. Spec.No.BR-21,P-124,MoRT&H1100,1600,&1700 a) 450 mm dia b) 475 mm dia c) 500 mm dia d) 525 mm dia e) 550 mm dia f) 600 mm dia g) 625 mm dia h) 650 mm dia R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M.
BR-21
152
Description of Items / Specification No. I) 750 mm dia j) 800 mm dia k) 825 mm dia l) 900 mm dia n) 975 mm dia m) 1000 mm dia o) 1050 mm dia p) 1100 mm dia q) 1200 mm dia r) 1500 mm dia
Unit R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M.
3569.00 3839.00 4045.00 5124.00 5540.00 6053.00 6656.00 7403.00 8760.00 12643.00
611.00 661.00 686.00 766.00 855.00 886.00 948.00 1016.00 1161.00 1665.00
28
Providing placing and driving in position for R.C.C.Piles, 6mm thick permanent M.S. liner upto required depth with 12mm thick M.S. cutting gauge of 0.50 metre length at bottom including fabricating, cutting the M.S. sheet to required diametre and shape, welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete.
Spec. No. As directed by Engineer-in Charge
--
--
29
Providing and cutting bending, hooking, laying in position and tying Mild steel / HYSD / TMT bars for reinforcement as per detailed drawings for R.C.C.work. BR.49P.143, & M.T. M.T. M.T. 50486.00 62817.00 63453.00 3335.00 3335.00 3197.00
BR-35,49. Spec.No. BR35P.134, MoRT&H-1600 a) Mild Steel bars b) HYSD bars c) T.M.T. bars 30 BR-36
Providing welded joints for Mild / H.Y.S.D. steel reinforcement bars etc. complete Spec. No. BR-36 Page No.134 a) upto 25 mm dia. b) above 25 mm dia. 153 No. No. 185.00 287.00 97.00 97.00
Unit
BR-SUB-STRUCTURES
31 Providing & laying in situ_______ cement concrete of trap/granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including form work centering (excluding dewatering by means of pump) and including bailling out water and curing etc. complete. (upto 5.00 mt. height) Note : add 2% for over 5.00 mt.height increase upto 10.00 mt. and 6% height above 10.00 mt.(height for that particular structure) Spec. No. BR-27 Page No.127& MoRT&Hcl.1500,1700 & 2100 I) Using Concrete Mixer Span length less than 30 mtr. a)PCCM-10 b)PCCM-15 Span length more than 30 mtr. c)PCCM-25 d)PCCM-30 II) Using Batching plant,transit mixer and concrete pump.(RMC) a)PCCM-25 b)PCCM-30 32 Providing coursed rubble trap / granite / quartzite / gneiss stone masonry in cement mortar __ for abutment, return, wings, head walls etc. with khandki facing and pointing with cement mortar 1:3 for all khandki faces and rubble facing with struck joints for rubble backing including scaffolding, bailing out water and watering masonry etc. complete. Spec. No. BR-25 Page No.125 I) Cement Morter 1:5 ii) Cement Morter 1:4 154
BR-27
Cu.M. Cu.M.
5000.00 5184.00
42.00 42.00
BR-25
Cu.M. Cu.M.
3746.00 4029.00
1871.00 1871.00
Description of Items / Specification No. Providing & laying in situ_______ cement concrete of trap/granite/quartzite/ gneiss metal for cast in citu R.C.C.solid piers, column etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including form work centering (excluding dewatering by means of pump) and including bailling out water and curing etc. complete. (upto 5.00 mt. height) (Excluding reinforcement) Note : add 2% for over 5.00 mt.height increase upto 10.00 mt. and 6% height above 10.00 mt.(height for that particular structure) Spec. No. BR-27 Page No.127& MoRT&Hcl.1500,1700 & 2100 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35
Unit
BR-27
Cu.M. Cu.M.
4947.00 5317.00
44.00 44.00
Cu.M. Cu.M.
5524.00 5630.00
44.00 44.00
155
Description of Items / Specification No. Providing and laying in situ cement concrete of------------ trap / granite / quartzite / gneiss metal for R.C.C. piers with vertical and horizontal diaphragram having neat and smooth finish, centering, shuttering, scaffolding compaction by vibrating and curing complete. Height. upto 5.00mtr. (excluding reinforcement) Note:i) Add 2% for over 5.00mtr.height increase up to 10.00mtr. ii)add 6% for height above 10.00mtr.(height for that particular structure ) Spec. No. BR-27 Page No.127& MoRT&Hcl.1500,1700 & 2100 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 e)RCCM-35
Unit
BR-27
Cu.M. Cu.M.
4792.00 5296.00
368.00 368.00
Cu.M. Cu.M.
5371.00 5477.00
368.00 368.00
35
Providing and laying in situ controlled -------of trap/granite /quartzite/gniess metal for R.C.C.caps over piers and abutments including necessary sacffolding,formwork, compacting by vibrating,finishing and curing etc. complete (excluding reinforcement) Spec. No. BR-29 Page No.129 Spec. No. MORT & H - Cl. 1500 & 1700 I) Using Concrete Mixer Span length less than 30 mtr. 156
BR-29
Description of Items / Specification No. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35
Rate for 12-13 (in Rs) Completed 5078.00 5269.00 Labour 352.00 352.00
Cu.M. Cu.M.
5453.00 5562.00
352.00 352.00
Cu.M. Cu.M.
5219.00 5409.00
42.00 42.00
Cu.M. Cu.M.
5594.00 5702.00
42.00 42.00
36
Providing and laying in situ --------- of trap / granite / quartzite / gniess metal for R.C.C work like dirt / ballast walls, kerbs, box returns etc complete including scaffolding, centering formwork, compaction,finishing and curing etc.complete (Excluding reinforcement) Spec. No. BR-50 Page No.143 Spec. No. MORT&H Section 1500&1700 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 Cu.M. Cu.M. 5194.00 5694.00 777.00 777.00 Cu.M. Cu.M. 4702.00 5040.00 777.00 777.00
BR-50
157
Description of Items / Specification No. Providing and laying in situ--------of trap/granite/quartzite/ gniess metal for reinforced cement concrete block below the bearing including necessary scaffolding, formwork, compaction by vibrating, finishing and curing etc. complete (excluding reinforcement) Spec. No. BR-30 Page No.130 Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c) RCCM-30 d) RCCM-35
Unit
BR-30
Cu.M. Cu.M.
5640.00 5901.00
830.00 830.00
Cu.M. Cu.M.
6120.00 6188.00
830.00 830.00
38
Providing and fixing in position Tar paper bearing as per detailed drawings etc. Complete. Spec. - As directed by Engineer-In-Charge. Sq.M. 69.00 12.50
39
Providing and fixing Neoprene bearing as per standard specifications etc complete. Spec. - As per IRC-83,part -ii. Spec. - MORT&H Sect. 2000 Cu.cm. 1.21 1.00
40
Providing and fixing cast steel roller rocker bearing including mild steel plate, grease box as per detailed drawings etc.complete Spec. No. BR-31 Page No.131 Spec. - MORT&H Sect. 2000 No. 40165.00 660.00
BR-31
41
Providing and fixing mild steel fixed and sliding plate bearing as per detailed drawing with 12 mm thick lead sheet between fixed bearing etc.complete No. 45619.00 660.00 Spec. - MORT&H Sect. 2000
158
Description of Items / Specification No. Providing and laying weep holes of 100 mm diameter ________ pipes as per drawing for abutment returns, return walls etc. Complete. Spec. - As directed by Engineer-In-Charge. a) AC b) PVC
Unit
R.M. R.M.
111.00 111.00
26.00 26.00
43
Providing trap/ granite/ quartzite / gneiss rubble filling behind the abtuments, returns or wings etc. complete. Spec. No. BR-57 Page No.151 Cu.M. 438.00 42.00
BR-57
BR-SUPER-STRUCTURES
44 Providing and laying in situ ____ I / II reinforcement cement concrete-- a to h -of trap /granite / quartzite / gneiss metal for R.C.C. work in solid slab,/ T-beam & slab / Box girder and balanced cantilever, including centering,formwork, scaffolding, ramming, vibrating finishing in cement plaster and curing etc. complete (excluding reinforcement) Height upto 5.00.mt.from the lowest bed level. Note: a) Solid slab i) 5% for height above 5.00 mtr. to 10.00 mtr. ii) 10 % for height above 10.00 mtr., b) T-beam & slab i) 5% upto 5.00mtr. height ii) 10% for height 5.00mtr. to 10.00mtr. iii) 15% for height above 10.00mtr.and c) Box girder and balanced cantilever i) 20% upto 5.00mtr. height ii) add 25 % for height 5.00mtr. to 10.00mtr. iii) 30% for height above 10.00mtr. BR-38 Spec. No. BR-38 Page No.135,MoRT&H1500,1600&1700 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 159 Cu.M. Cu.M. 6155.00 6341.00 1090.00 1090.00
Description of Items / Specification No. Span length more than 30 mtr. c)RCCM-30 d)RCCM-35 Span length above 30 mtr. e)PSCM-40 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-25 Span length more than 30 mtr. b)PSCM-30 c)PSCM-35 Span length above 30 mtr. d)PSCM-40 e)PSCM-45 f)PSCM-50 Box grider, segmental balance cantilever g)PSCM-55 construction,
Unit
Rate for 12-13 (in Rs) Completed 6636.00 6736.00 Labour 1090.00 1090.00
Cu.M. Cu.M.
Cu.M.
8058.00
1090.00
Cu.M.
6473.00
44.00
Cu.M. Cu.M.
6554.00 6591.00
44.00 44.00
Cu.M.
9820.00
48.00
45
Providing and laying in situ --------- cement concrete of trap / granite / quartzite / gneiss metal for R.C.C. work including formwork, centering ramming, vibrating, finishing and curing complete for main/cross girder diaphragms arch etc.complete. (excluding reinforcement) Height upto 5.00. Note:i) 5% for height above 5.0 m & upto 10.0 m ii) add 10% for height above 10.00 m Spec. No. BR-38 Page No.135,MoRT&H1500,1600&1700 I) Using Concrete Mixer Span length less than 30 mtr. a) RCCM-20 Cu.M. b) RCCM-25 Cu.M.
BR-38
6107.00 6341.00
1090.00 1090.00
160
Description of Items / Specification No. Span length more than 30 mtr. c) RCCM-30 d) RCCM-35 Span length above 30 mtr. e) PSCM-40 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a) RCCM-25 Span length more than 30 mtr. b) RCCM-30 c) RCCM-35 Span length above 30 mtr. d) PSCM-40 e) PSCM-45 f) PSCM-50 Box grider, segmental construction, balance cantilever g)PSCM-55
Unit
Rate for 12-13 (in Rs) Completed 6642.00 6736.00 8063.00 Labour 1090.00 1090.00 1090.00
Cu.M.
9820.00
53.00
46
Providing and casting special grade -------- in controlled cement concrete of specified strength for prestressed concrete work for main girder including slab, cross girder, box girder etc. including centering & scaffolding or launching including necessary plant and machinery for the job shuttering, vibrating, curing, finishing etc. complete. Hight upto 5 meter. (excluding reinforcement) Note:i) add 5% for hight and upto 10.00m. ii) Add 10% for hight above 10.00 m. Spec. No. BR-38 Page No.135,MoRT&H1500 &1700 I) Using Concrete Mixer Span length less than 30 mtr. a)RCCM-20 b)RCCM-25 Span length more than 30 mtr. c)RCCM-30 161 Cu.M. 6511.00 1069.00 Cu.M. Cu.M. 5810.00 6220.00 1069.00 1069.00
BR-38
Description of Items / Specification No. d)RCCM-35 Span length above 30 mtr. e)PSCM-40 II) Using Batching plant,transit mixer and concrete pump.(RMC) Span length less than 30 mtr. a)RCCM-25 Span length more than 30 mtr. b)PSCM-30 c)PSCM-35 Span length above 30 mtr. d)PSCM-40 e)PSCM-45 f)PSCM-50 Box grider, segmental construction, balance cantilever g)PSCM-55
Unit Cu.M.
Cu.M.
7605.00
972.00
Cu.M.
6365.00
46.00
Cu.M. Cu.M.
6656.00 6750.00
46.00 46.00
Cu.M.
9651.00
48.00
47
Providing and fixing in position to exact profile and prestressing high tensile steel of specified ultimate strength including cost of sheathing duct (ID66mm.),Tube anchorage set with bearing plate,permnet wedges, preparing cable with sheathing and spacers, cement for grouting etc. complete. Spec.No.:MoRT&H clause1800 M.T. 127483.00 4271.00
48
Providing and laying of an elastomeric slab seal expansion joint,catering to right or skew (less than 20 deg.) moderately curved with maxmimum horizantal movement upto 50mm., etc. complete as per approved drawings and specifications to be installed by manufacturer/ supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation etc. complete. (for road work & bridge work). R.M. 162 22656.00 733.00
Description of Items / Specification No. Providing expansion joint as per detailed drawing 25 mm thick premoulded bituminous filler and with alluminium plate Spec. No. BR-43 Page No.138 Providing & fixing in position expansion joint with ----- bituminous pad as per detailed drawing etc. complete Spec. No. BR-43 Page No.138 a) 18 mm. Thick b) 25 mm. Thick c) 37 mm. Thick
Unit
BR-43 50
Sq.M.
728.00
27.00
BR-43
51
Providing and laying in situ-----of trap / granite / quartzite / gniess metal including compacting, finishing,curing and filling in joints with bitumen complete for wearing course 8 cm thick etc. complete (excluding reinforcement)
Spec. No. BR-47 Page No.140,MoRT&H-2700.
BR-47
a)M-20 b)M-25 c)M-30 d)M-35 e)M-40 52 Providing bitumen mastic wearing coat excluding tack coat complete as per drawing and technical specification etc. complete (with lead of material 5 km) Spec. No: MoRT&H 515&2702 a) 25mm b) 20mm c) 12mm Providing vent holes in the slab and wearing course with iron grill at the top and galvanised iron pipe at bottom as per drawing. Spec. No. BR-48 Page No.142 Providing galvanised iron 100 mm diameter water spout as per drawing etc. complete (length of water spouts 600 mm) Spec. No. BR-55 Page No.150 163
53
BR-48 54
No.
404.00
44.00
BR-55
No.
535.00
106.00
Unit
BR-45
Providing and laying in situ cement concrete of trap metal for haunch filling including compacting curing etc. complete. Spec. No. BR-45 Page No.139 a)M-10 Cu.M. b)M-15 Cu.M. Providing trap rubble filling over haunches and arches including hand packing etc. complete Spec. No. BR-46 Page No.140 Cu.M. Providing and laying in position 90 cm thick flexible stone mat as per standard drawing consisting of 45cm.thick trap rubble soling,22.50cm. thick over size metal layor of 100mm to 150mm metal, 11.30cm thick layor of 80mm to 100mm over size metal,and 11.20cm. thick layer of 40mm size metal with blindage of hard murum for rubble soling & over size, soft murum for size metal layor,consolidation 15 cm to 23 cm soling, consolidation of 80 mm to 100mm, 100mm to 150mm over size metal in two layers and consolidation of 40mm size metal layers in single layer with watering etc. complete. (including lead of 50 mt) Spec. No. As directed by Engineer-in Charge Sq.M.
3277.00 3601.00
397.00 397.00
56 BR-46 57
630.00
232.00
719.00
105.00
58
Providing and laying in situ cement concrete of trap / granite / quartzite/ gniess metal including compacting, finishing, curing and filling in joints with bitumen complete for approach slab etc. complete (excluding reinforcement)
Spec.No.BR47Page No.140,MoRT&H-1500, 1700 & 2704
BR-47
164
Unit
BR-51(a)
Providing R.C.C.parapet with (15x 60cm)-------cement concrete of trap/ granite / quartzite / gneiss metal, cast in situ precast panels as per the detailed drawing including reinforcement, scaffolding , centering, formwok, compating, finishing and curing etc. complete. Spec. No. BR-51 (a) Page No.144 a)M-20 R.M.T. b)M-25 R.M.T.
1607.00 1722.00
513.00 513.00
60
Providing collapsible railing with mild steel channel posts removable galvanised iron pipes as per the detailed drawings including scaffolding and painting etc.complete. Spec. No. BR-51(d) Page No.146 Providing railing of mild steel angle post 2 metre centre to centre of section 75 mm x 75 mm x 10 mm or equivalent channel section of height 1.05 m above ------------- surface with minimum anchor lenght of 30 cm including hold fast of 25 mm diameter mild steel bars welded at the bottom and concreting of 1:3:6 of size 30 x 30 x 30 cm with three rows of 40 mm 'B' class G.I pipe provided at 30 cm centre to centre and including scffolding and with two coat of anticorrosive paint.etc.complete. Spec. No. BR-51 (b) Page No.144 a) on Bridge b) on road (High embankment with bed block) R.M. R.M. 2043.00 2043.00 226.00 226.00 R.M. 3492.00 874.00
BR-51(d) 61
BR-51(b)
62
BR-56 63
Providing and fixing 25 mm thick marble tablet of size and description as per detailed drawings inclduing engraving the description,filling the lead, moulded marble 1:2 cement mortar border etc.complete. Spec.No.BR-56 Page No.150 Sand blasting to the concrete surface including all materials, machinary and labour etc. complete.
Spec. No. As directed by Engineer-in Charge
Sq.M.
6667.00
1819.00
Sq.M.
77.00
73.00
165
Description of Items / Specification No. Guniting surface with cement mortar, 1:3 of 30 to 50 milimetre thick (average 40 milimetre) under pressure of 2.1 to 2.80 kg. per squre centimetre including necessary IRC fabric (welded mesh) of 75 x 75 milimetre and 10 gauge reinforcement, forms with floating, cutting etc complete (excluding reinforcement)
Spec. No. As directed by Engineer-in Charge
Unit
Sq.M.
740.00
93.00
65
Providing and applying Polymer synthetic elastomeric coating cum paint, ready to use for bridge structure in saline as to avoid salt penitration from marine environmet & U.V effects of sunrays, fungus developments and to protect the reinforcement from marine atmoshpere effects in three coats including scaffolding, sand blasting, cleaing the surface of concrete, brushing steel reinforcement and applying polymer coating with Primer, First coat and Second coat at an interval of 24 hours of approved shade and colour.( But not to applied on oil, Grease, Tar & Moisture of surface Note:-Prior approval of S.E. is required.)
Spec. No. As directed by Engineer-in Charge
Sq.m.
662.00
67.00
66
Providing and applying anticorrisive treatment for MS & TOR steel reinforcement as per cement polymer composite coating (CPCC) method developed by CECRI including cleaning the bar by means of any established mechanical or manual method for removing the rust and deletious matter, applying rapid setting primer and cement polymer sealing coat of approved and licensed by CECRI including redoing the process if damaged occur during handling, stacking etc. complete as directed by the Engineer in charge. (with prior approval of S.E. is essential.) Spec.No.As directed by Engineer-in Charge M.T. 8148.00 2110.00
166
Description of Items / Specification No. Providing fusion bonded epoxy to reinforcing bars as per IS: 3620-1993 specification for a thickness of 175+/-50 microns including testing of coating at plant, extra cost for careful handling using PVC coating, binding wires instead of G.I.wires, touching up the material supplied, repair work etc. complete as per detailed specifications etc. complete. (Lead 200 km to and fro from plant) Spec.:MoRT&H 1600 Edition 2001 Providing and applying approved quality coal tar epoxy paint in three coats of well, pier abutment between L.T.L. to 0.90 metre H.F.L. above including cleaning surface, scaffolding etc. complate. Spec.No.As directed by Engineer-in Charge
Unit
M.T.
11687.00
--
68
Sq.M.
236.00
58.00
69
Providing epoxy mortor with quartn sand with proportion epoxy sand 1:6 for repairs to the cracked pier, girder etc including chipping the loose cracked concrete cleaning rust by means of brush, sand blasting and rebuilding the section giving minimum 3 day compressive strenght of 525 Kg/cm2 and maximum epoxy consumption of 315 Kg/m3 of mortar with all materails labour equipment etc complete (Quartz sand 885 Kg/Cum)
Spec.No.As directed by Engineer-in Charge Sq.M. 114485.00 8464.00
167
Unit
Providing and laying epoxy concrete with epoxy aggregate proporation 1:4 using epoxy fine quartz sand,course quartz sand and trap metal in suitable proportion by weight including weighing, mixing placing inclusive of cleaning the surface by wire, brush, sand blasting for applying the tackcoat of epoxy as directed and giving minimum 3 days compressive strength of 525 Kg/cm2 and maximum epoxy consumption of 214 Kg/m3 of concrete including necessary formwork with all materials, labour, centering equipment etc complete as directed.(scaffolding will be paid separately if required) (Fine sand 660 Kg/Cum,course sand 660 Kg/Sqm,Trap metal 660 Kg/Sqm
Spec.No As directed by Engineer-in Charge Sq.M. 77287.00 8850.00
71
Providing epoxy coating in two coats with primer for the stone or concrete surfaces including cleaning by sand blasting, brushing, cost of the materials, machinery equipment, scaffolding labour etc complete as directed.
Spec.No.As directed by Engineer-in Charge Sq.M. 562.00 208.00
72
Providing and injecting epoxy grout including strutting of cracked in surfacs including cleaning by sand blasting, brushing cost of the materials, machinery equipment, scaffolding labour etc complete as directed.
Spec.No.As directed by Engineer-in Charge Sq.M. 1009.00 71.00
73
Providing and applying epoxy paint primer with middle coat and top to superstructure including scaffolding etc complete.
Spec.No.As directed by Engineer-in Charge Sq.M. 414.00 130.00
168
C. D. WORK
Item No.& Item code 1 Description of Items / Specification No. Unit Rate for 12-13 (in Rs) Completed Labour Providing rubble filling of trap/granite/quartzite gneiss stones of approved quality in foundation including hand packing filling gravel of sand in the voids etc. complete. Spec.No.CD-1,P-159 Cu. M. Providing and laying in situ cement concrete of ___ proporation with trap metal in foundations including necesary compacting and curing etc., complete. (including formwork) Spec.No.CD-3,P-160 a) 1:5:10 b) 1:4:8 c) M-10 d) M-15 3 Cu. M. Cu. M. Cu. M. Cu. M. 2342.00 2640.00 3200.00 3465.00 453.00 453.00 453.00 498.00
CD -1 2
520.00
147.00
CD -3
CD -4 4
Providing approved quality of trap / granite / quartizite / gneiss rubble stone paving 15cm thick in 1:3 cement mortar over a bedding of 15cm thick cement concrete of 1:4:8 proportion with trap/granite / quartizite / gneiss metal including striking joints and watering etc. complete. Spec.No.CD-4,P161 Sq. M. Providing approved quality of trap / granite / quartizite / gneiss khandki stone paving of 20.50 cm. thick in 1:3 cement morter over bedding of 15cm thick cement concrete of 1:4:8 porportion with trap / granite / quartzite / gneiss metal including pointing with cement mortar 1:3 and watering etc. complete. Spec.No.CD-5,P-161 Providing uncoursed rubble masonry trap stone in cement mortar 1:6 for head walls including striking joints of the non exposed faces and pointing the exposed faces with cement mortar 1:3 including scaffolding and watering masonry etc. complete. Including bailing out water manually. Spec.No.CD-6,P-162 169 Cu. M. Sq. M.
1002.00
169.00
CD -5 5
1519.00
555.00
CD -6
2543.00
911.00
Description of Items / Specification No. Providing coursed rubble masonry of Laterite stone in cement mortar 1:6 for head walls including striking joints of the non exposed faces and pointing the exposed faces with cement mortar 1:3 including scaffolding and watering masonry etc. complete. Including bailing out water manually.
Unit
CD -6 7
Cu. M. Spec.No.CD-6,P-162 Providing & laying in situ cement concrete of trap/granite/quartzite/ gneiss metal for cast in citu head walls for causeway & C.D.Works with compaction by vibrating & curing complete including form work centering etc. complete (excluding dewatering by means of pump and including bailling out water). Spec. No. BR-27 Page No.127 a)PCCM-10 Cu.M. b)PCCM-15 Cu.M. c)PCCM-20 Cu.M. Providing & Laying cement concrete pipe of IS 458-1988 __Class in proper line level & slope including providing fixing collars in cement mortar 1:2 etc. complete item. (A) Rate of supply of pipes as per MSSIDC rate contract taken for framing the estimate. (B) Labour rate for laying of pipe & fixing with collar in cement morter 1:3 as given below which is to be included in the item. Spec.No.CD-7,P162 A) I) ii) iii) iv) v) vi) B) I) ii) NP-2 for V.R.& O.D.R. Diameter 450 mm Diameter 600 mm Diameter 750 mm Diameter 900 mm Diameter 1000 mm Diameter 1200 mm R.M. R.M. R.M. R.M. R.M. R.M.
--
--
BR-27
CD-7
Description of Items / Specification No. Diameter 900 mm Diameter 1000 mm Diameter 1200 mm
Rate for 12-13 (in Rs) Completed 6030.00 6793.00 9233.00 Labour 323.00 379.00 407.00
C)
I) ii) iii) iv) v) 9
CD -8 10
Providing cast in situ block 1:3:6 cement concrete with circle or other shaped opening for water way including necessary form work, compacting, finishing and curing etc. complete. Spec.No.CD-8,P-163 Cu. M. Providing Precast M-25 R.C.C.slabs over the spans of cross drainge work as per drawings including HYSD bar reinforcement, conveyance, fixing in cement mortar 1:3 and curing, finishing etc. complete. Spec.No.CD-12,P-166 Cu. M. Providing and laying in situ 1:4:8 cement concrete of trap metal for haunch filling including formworks compacting, curing and scaffolding etc. complete. Spec.No.CD-13,P-167 Cu. M. Providing seclected hard murum filling including laying in layers of 15 to 20 cm. watering and compacting etc. complete. Spec.No.CD-14,P-167 Cu. M. Providing 5cm thick 1:3 cement mortar coping with stone chips embedded including scaffolding, form work, finishing and curing etc. complete. Spec.No.CD-17,P-168
3546.00
536.00
CD -12 11
8464.00
1819.00
CD -13 12
2881.00
396.00
CD -14 13
322.00
179.00
CD -17
Sq.M.
622.00
316.00
171
Description of Items / Specification No. Providing and fixing in cement mortar 1:2, marble plate 30cm. x 20cm. showing the No. of Cross Drainage work and the direction of flow by arrow including cutting border line, figures, letters, signs and painting etc. complete. Spec.No.CD-18,P-168 Providing and fixing M-15 R.C.C.Guard stone of 20 x 20 x 75 cms including fixing in ground and white washing etc. Complete. Spec.No.CD-20,P-169
Unit
CD -19 15
No.
422.00
174.00
CD -20
No.
300.00
61.00
172
BORING
Item No.& Item code 1 Description of Items / Specification No. Taking trial bores for detailed investigations -a/b/c/d-- 75mm.( 3")boring incluiding all materials such as casing pipes & accessories, grease, steel balls and other such materials as required,including conveying such materials and machinery to site of works, preserving the loose samples in glass or plastic jar / core sample in box with core samples serially numbered at site of work and conveying the same to the head quarter of concerned office as directed Spec. As directed by Engineer-In-Charge. a) up to hard murrm & boulder ( over burden ) i ) diamond drilling M/c b) in soft rock i ) diamond drilling by Calyx M/c c) in quartzite rock i ) diamond drilling M/c with NX bit double tube ii ) diamond drilling M/c with BX bit iii ) diamond drilling M/c with AX bit d) in other rock i ) diamond drill 2 Taking trial bores for detailed investigations -a/b/c/d-100mm.( 4") boring incluiding all materials such as casing pipes & accessories, grease, steel balls and other such materials as required,including conveying such materials and machinery to site of works, preserving the loose samples in glass or plastic jar / core sample in box with core samples serially numbered at site of work and conveying the same to the head quarter of concerned office as directed Spec. As directed by Engineer-In-Charge. a) up to hard murrm & boulder ( over burden ) i ) diamond drilling M/c b) in soft rock i ) diamond drilling by Calyx M/c R.M. R.M. 1997.00 2190.00 53.00 53.00 R.M. R.M. R.M. R.M. R.M. 1915.00 2166.00 7645.00 4477.00 3680.00 32.00 32.00 32.00 32.00 32.00 Unit Rate for 12-13 (in Rs) Completed Labour
R.M.
2428.00
32.00
173
BORING
Item No.& Item code Description of Items / Specification No. c) in quartzite rock i ) diamond drilling M/c with NX bit double tube ii ) diamond drilling M/c with BX bit iii ) diamond drilling M/c with AX bit d) in other rock 3 i ) diamond drill Taking trial bores for detailed investigations -a/b/c/d-150mm.( 6") boring incluiding all materials such as casing pipes & accessories, grease,steel balls and other such materials as required,including conveying such materials and machinery to site of works, preserving the loose samples in glass or plastic jar / core sample in box with core samples serially numbered at site of work and conveying the same to the head quarter of concerned office as directed Spec. As directed by Engineer-In-Charge. a) up to hard murrm & boulder ( over burden ) i ) diamond drilling M/c b) in soft rock i ) diamond drilling by Calyx M/c c) in quartzite rock i ) diamond drilling M/c with NX bit double tube ii ) diamond drilling M/c with BX bit iii ) diamond drilling M/c with AX bit d) in other rock i ) diamond drill 4 Taking trial bores by hand augar through over burden such as soil and soft murum upto hard strata. Spec. As directed by Engineer-In-Charge. Providing Tuntappa core boxes of jungle wood of size 1.25 x 0.55 x 0.15 metre for preserving core samples with all fixtures and fastening handles locking arrangements etc. complete. Spec. As directed by Engineer-In-Charge. 174 R.M. R.M. 2338.00 53.00 Unit Rate for 12-13 (in Rs) Completed 8260.00 5185.00 4046.00 Labour 53.00 53.00 53.00
2350.00
64.00
R.M.
2350.00
64.00
R.M.
446.00
383.00
No.
2799.00
378.00
BORING
Item No.& Item code 6 Description of Items / Specification No. Providing and maintaining a Temporary platform as required 100 Sq.ft. size for erecting the boring machine for taking trial bore in the nalla / small river bed in standing water -a/b/c- including all materials etc.complete. Spec. As directed by Engineer-In-Charge. a) For depth up to 1.00 Meter. b) For depth of 1.00 to 2.00 Meter. c) For depth 2.00 Meter. And above 7 Providing and maintaining temporary floating platform as required 10 Sq.mtr. size with country crafts and teak wood platform and/anchor's for erecting boring plant in standing and flowing water a/b/c-including all material, labours etc. complete. Spec. As directed by Engineer-In-Charge. a) For depth above 2.00 Meter. b) For depth of 5.00 to 10.00 Meter. c) For depth above 10.00 Meter. Note: The rate of Boaring item No.6&7( as given above ) is proposed for total working of platform for 10 days, if more work, the rate of this item should be worked out on the basis of rates abstract for item No.7(a). Shifting boring platform as required (100 Sq.Ft. size) with all components and reinstalling at directed places,including all charges of shifting etc.complete. Spec. As directed by Engineer-In-Charge. Conducting standard pentration test on soil, sand by split spoon sample for--a/b/c--diameter bore hole including labour & material etc. complete.(Equipment and materials is to be supplied by Department free of cost). Spec. As directed by Engineer-In-Charge. a) 75mm b) 100mm c) 150mm 175 No. No. No. 12216.00 23545.00 28786.00 1991.00 4011.00 4011.00 Unit Rate for 12-13 (in Rs) Completed Labour
No.
3579.00
3171.00
BORING
Item No.& Item code Description of Items / Specification No. Unit Rate for 12-13 (in Rs) Completed Labour .
BLANK
176
Km.
886.00
649.00
Km.
1241.00
908.00
Km.
1782.00
1557.00
177
Km.
3268.00
2855.00
No.
3208.00
1298.00
No.
0.00
0.00
10
No.
0.00
--
11
No.
74.00
51.00
15
No.
588.00
513.00
16
No.
1472.00
1317.00
17
No.
5221.00
4672.00
18
No.
1938.00
1734.00
19
No.
17474.00
15576.00
Carrying out the contour survey of the stream for 1 square kilometre area etc. complete. Spec. - As directed by Engineer-In-Charge. Sq.Km. Detailed survey of approaches to medium or major bridge including chain and compass survey, levelling etc.complete. Spec. - As directed by Engineer-In-Charge. Providing and constructing the theodolite piller of Burnt Brick Masonary in cement mortar 1:6 as per drawing or as directed including casting in situ cement concrete 1:2:4 coping of size 23 x 23 x 60 cm.and fixing theodolite ring, plastering in cement mortar 1:5 out side etc. complete. Spec. - As directed by Engineer-In-Charge. No.
34811.00
31152.00
22
Km.
3268.00
2855.00
23
6374.00
0.00
24
Complete survey of medium stream having catchment area upto 1 square mile including longitudinal section and cross section for bridge and approaches etc.complete Spec. - As directed by Engineer-In-Charge. Investigation of new quarry (other than existing) including taking necessary trial pits, cutting rock for finding suitablilty for metal etc. complete (excluding testing of material) Spec. - As directed by Engineer-In-Charge. Reconnaissance survey of bridge alignment in creek including its approaches,taking three dimensions of appexes without chaining including use of boat etc.complete. Spec. - As directed by Engineer-In-Charge. 180
No.
2610.00
2336.00
25
No.
2610.00
2336.00
26
Km.
2416.00
778.00
181
Km.
6000.00
0.00
182
Rd. 70. 9
183
Sq.Km. Sq.Km.
20200.00 22900.00
0.00 0.00
Job
5060.00
0.00
Job Job
32540.00 39050.00
0.00 0.00
185
Dist.
3340.00
3175.00
187
BLANK
188
VIDEOGRAPHY
Item No.& Item code 1 Description of Items / Specification No. Providing & carrying out video cassettee hour shooting of roads, bridges, buildings, other structures and programmes, including preliminary survey, still shots moving shooting, transportation of all equipments, persons required for shooting, lighting arrangement as may be necessary, editing, mixing, titling, lettering, sounding including cost of two coloured cassette (C.D) of approved quality etc. complete As Directed by the Engineer-In-Charge 2 Preparing and carrying out video shooting of roads, bridges, buildings, other structures and progremmes, including hiring of vehicles, equipment for video shooting, titling, lighting, mixing, lettering, editing, including cost of two colour cassettes(C.D)of approved make and quality etc. complete. As Directed by the Engineer-In-Charge i) ii) iii) 3 Within 50 Kms Beyond 50 Kms Work upto 5 hours per day only Day Day Day 4180.00 5380.00 2345.00 0.00 0.00 0.00 Cassette hour. 2145.00 0.00 Unit Rate for 12-13 (in Rs) Completed Labour
Shooting of still photographs,outdoor and indoor, of construction and other works of building, bridges, roads etc. complete in District and outside District of any distances. As Directed by the Engineer-In-Charge i) I)a ii) ii)a iii) iii)a Still photos passport cut size Extra copies passport cut size 4" x 6" Size Extra copies 4" x 6" Size 5"x 7" Size Extra copies 5" x 7" Size 3 Copies 1 each 3 Copies 1 each 3 Copies 1 each 70.00 22.00 104.00 22.00 175.00 38.00 0.00 0.00 0.00 0.00 0.00 0.00
189
VIDEOGRAPHY
Item No.& Item code 4 Description of Items / Specification No. Printing of drawing on Autocad in following size with tracing on reproducting paper from available sources etc. complete. As Directed by the Engineer-In-Charge i) AO ( 1165 X 817mm ) ii) A1 ( 817 X 570mm ) iii) A2 ( 570 X 396mm ) iv) A3 ( 396 X 275mm ) v) A4 ( 285 X 196mm ) 5 Printing of drawing on Autocad with one proof print for following size on plain white paper with black colour print providing tracing with saving on disc etc. complete. As Directed by the Engineer-In-Charge i) AO ( 1165 X 817mm ) ii) A1 ( 817 X 570mm ) iii) A2 ( 570 X 396mm ) iv) A3 ( 396 X 275mm ) v) A4 ( 285 X 196mm ) 6 Editing and correction on drawing and giving the print on tracing paper with tracing. As Directed by the Engineer-In-Charge i) AO ( 1165 X 817mm ) ii) A1 ( 817 X 570mm ) iii) A2 ( 570 X 396mm ) iv) A3 ( 396 X 275mm ) v) A4 ( 285 X 196mm ) 1 each 1 each 1 each 1 each 1 each 925.00 770.00 700.00 540.00 390.00 0.00 0.00 0.00 0.00 0.00 1 each 1 each 1 each 1 each 1 each 2450.00 1850.00 1700.00 1225.00 770.00 0.00 0.00 0.00 0.00 0.00 1 each 1 each 1 each 1 each 1 each 770.00 615.00 530.00 460.00 310.00 0.00 0.00 0.00 0.00 0.00 Unit Rate for 12-13 (in Rs) Completed Labour
190
Item No.
Description of Items
Unit
201
a) BY MANUAL MEANS
i) In area of light jungle ii) In area of thorny jungle Hector Hector 30341.00 40725.00
b) BY MECHANIC MEANS
i) In area of light jungle ii) In area of thorney jungle Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Hector Hector 17238.00 17232.00
202
a) BY MANUAL MEANS
(a) Lime /cement concrete i) Lime concrete/cement concrete Grade M-10 and below ii) Cement concrete grade M-15 & M-20 iii)Prestressed / Reinforced cement concrete grade M-20 & above cu.m. 331.00
cu.m. cu.m.
352.00 500.00
191
Item No.
Description of Items
(b) Dismantling Brick/Tile Work i) In lime/Cement mortar ii) Dry brick pitching or brick soling (c) Dismantling stone masonary i) Rubble stone masonry in lime/cement morter ii) Dry rubble masonry iii) Dismantling stone pitching/dry stone spalls iv) Boulders laid in wire in wire crates including opening of crates and stacking crates material. (d) Steel work in all types of section upto a height of 5 m above plinth level excluding cutting rivet. i) Including dismembering ii) Excluding dismembering (c) Extra over item No.IV(a) & (b) for cutting rivets
(e) Scarping Plaster in Lime or Cement Bricks / Stone Masonry Mortar from
Unit
cu.m. cu.m.
(f) Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works. I) upto 600mm dia. pipes ii) Above 600mm to 900mm dia iii) Above 900mm dia Rmt. Rmt. Rmt. 74.00 94.00 . 135.00
192
Item No.
4
Description of Items
Dismantling of Flexible Pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately. a) MANUAL MEANS I) Bituminous course
Unit
202
cu.m. cu.m.
424.00 241.00
cu.m.
149.00
193
Item No.
Description of Items
Unit
EARTHWORK
1 301 Excavation for the roadway in soil using manual means including dressing section to the required grade, camber, side slopes and loading in a truck and carrying of cut earth to embankment site with all lifts and lead upto 1000 metre and spreading for embankment or stacking, disposing as directed by Engineer in charge. a) Earth soil of all sorts sand, gravel or soft murum cu.m. 117.00
b) Hard murum c) Hard murum and boulders 2 301 Excavation in ordinary rock using manual means including dressing section to the required grade, camber, side slopes and loading in a truck and carrying of excavated material to embankment site with all lifts and lead upto 1000 metre spreading for embankment or stacking as directed by Engineer in charge. Excavation for the roadway in hard rock (requiring blasting) by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross section, loading and disposal of cut road with in all lifts and lead upto 1000 metre spreading for embankment or stacking as directed by Engineer in charge. Excavation for the roadway in hard rock(blasting prohibited) with including loading in tippers and disposal within all lifts and lead upto 1000 metre, dressing section by wedging, chiseling or line drilling, in accordance with requirements of lines, grades and cross section, spreading for embankment or stacking as directed by Engineer in charge.
302
Cu.m.
463.00
302
cum.
691.00
194
Item No.
5
Description of Items
Unit
302
Excavation for the roadway in marshy soil with hydraulic excavator 0.9 cum bucket capacity including cutting and loading in tippers and disposal within all lifts and lead upto 1000 metre, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross section, etc. complete. Construction of embankment with approved materials obtained from Private land/Barrow pit including all lifts and lead transporting to site, laying in layers of 250mm thick loose, breaking cloads dressing to the required line, curves, grade and section, watering the earth to O.M.C. and compacting to meet requirements as per specification 305-2 table 300-2 a) Compacting with vibratory roller b) Compacting with Power roller
Cum.
305
Cum. Cum.
191.00 172.00
305
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structure including all lifts and lead up to 15m. laying in layers of 250mm thick loose, breaking cloads dressing to the required line, curves, grade section, watering the earth to O.M.C.and compacting to meet requirements as per specification cl. 305-2 table 3002 a) Compacting with vibratory roller b) Compacting with power roller cu.m. cu.m. 92.00 84.00
309
Construction of aggregate Sub-Surface Drains 300 mm x 450 mm with aggregates conforming to table 300-4. excavated material to be utilised in roadway.
Rmt.
--
195
Item No.
Description of Items
Unit
404-3.2 Construction of inverted choke by providing, laying, spreading and compacting of specified graded aggregate in subbase course in uniform layer on a prepared base with motor grader and compacting with power roller etc. 404-3.1 Making 50 mm x 50 mm Furrows, 25 mm / 50 mm deep, 450 to the center line of the road and at one meter interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres complete.
Sqm
4.00
196
Item No.
5
Description of Items
Providing,laying,spreading and compacting stone aggregates of specified sizes to water bound macadam specification, including spreading in uniform thickness,hand packing rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber,applying and brooming requisite type of screening, binding materials to fill up the interstics of coarse aggregates, watering and compacting to the required density making necessary earthen bund to protect edges, lighting, guarding, barricading and maintenance of diversion etc.complete (a) By manual means I) ii) Grading - I Grading - II
Unit
404
iii) Grading - III (b) By mechanical means metal spreading is to be done by motor graders I) Grading - I ii) iii) 6 406 Grading - II Grading - III
Providing, laying, spreading and compacting graded stone aggreagte to wet mix macadam specifications including premixing the material with water to OMC in mechanical mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on a well prepared surface and compacting with power / vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion with etc. complete.
197
Item No.
Unit
502
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base and spraying primer at the rate of 0.60 Kg/sq.m using mechanical means including clearing of road surface. Providing and applying tack coat with bitumen 60/70 grade at the rate of ----- kg per sq.m on the prepared bituminous/granular surface cleaned with mechanical broom. A) On black topped surface at 2.5/10 Sqm. B) On granular surface at 3.50 Kg/10 Sqm.
Sq.M.
34.00
503
Sq.M. Sq.M.
15.00 20.00
504
Providing and laying bituminous macadam With 100120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.
A) By use of Vibratory roller 4 505 Providing and laying penetration macadam of 50 mm compacted thickness on prepared surface incluing spreading course aggregate compacting with 8-10 tonne smooth wheeled power roller for required grade and camber applying hot bitumen by pressure distributor at the specified rate applying key aggregate compacting with 8-10 tonne smooth wheeled power roller to achieve desire degree of compaction. Bitumen 60/70 grade @ 5kg/sq.m A) By use of power roller B) By use of Vibratory roller
Cu.M.
6476.00
Sqm. Sqm.
344.00 342.00
198
Item No.
5
Description of Items
Providing, laying & rolling of Builtup spray Grout layer 75mm thick compacted thickness over prepared base consisting of a 2 layers composite construction of compacted crushed coarse aggregates using motor grader for aggregates key stone chips spreader may be used with application of bitumen binder after each layer and with key aggreates placed on top of second layer to serve as a base confirming to the line, grades and cross section specified & rolling with vibratory roller etc. complete. Bitumen 60/70 grade @ 30kg per 10 sq.m. @ 15 kg per 10 sq.m. for each layer.
Unit
Sq.m.
506
507
Providing and laying hot mix hot laid Dence Bituminous Macadm 50/75mm compacted thickness with 4.25 % bitumen content by weight of total mix on prepared surface with specified gradedcrusher aggregates for the base/binding course including loading of aggregates with F.E.Loader, heating of stone aggregates and bitumen and mixing, in modern drum mix type of hot mix plant transporting the hot mix to work site laying the mixed material with sensor paver finisher to the required grade, level and camber, rolling by power roller and vibratory roller to achieve the desired density (Grade of Bitumen should be 60/70) Providing and laying bituminous concrete With 100120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment,rolling with smooth wheeled,vibratery and tandem rollers to achieve the desired compaction as per MORTH specification clause No.509 complete in all respects. A) Bitumen in bulk - 60/70-VG-30 B) Crumb Rubber Modified Bitumen CRMB - 55
Cum.
6257.00
509
Cum. Cum.
7701.00 7400.00
199
Item No.
8
Description of Items
Providing and laying surface dressing as wearing course in single coat using crushed stone aggregate of specified size on a layer of bituminous binder laid on the prepared surface, and rolling with 8 -10 tonne smooth wheeled steel roller a) 19 mm nominal chipping size @ 0.015 cum per sqm and Bitumen @ 1.20 kg per sqm. b) 13 mm nominal chipping size @ 0.01 cumper sqm and Bitumen @ 1.00 kg per sqm.
Unit
Sqm Sqm
73.00 59.00
511
Providing & laying and rolling open graded premix surfacing 20 mm thick with specified graded crushed aggregates for wearing course including supplying all materials, preparing and cieaning the base, loading of aggregate with F.E loader, heating bitumen and aggregates in modern drum type hot mix plant of appropriate capacity transporting the mixed material to work site and laying with paver finisher to the required level and grade rolling with power roller 8 - 10 tonne capacity. Using Bitumen 60/70 Grade @ 14.60 kg /sqm
Sqm.
110.00
10
512
Providing and rolling of close graded premix mix seal surfacing of 20 mm thickness composed of 11.2 mm to 0.09 mm (type a) or 13.2 mm to 0.09 mm (type b ) aggregate using 60/70 grade bitumen @ 22kg/10sqm to the required line, grade and level to serve as wearing course on a previously prepared base including mixing in suitable HMP of appropriate capacity and finishing to required level and grade.
Sqm.
147.00
11
513
a) Providing and laying of seal coat for sealing the voids in a bituminous surface laid to the specified level, grade and cross fall followed by a cover of stone chipping of 6.7mm size @ 0.09 cum & rolling with 8 to 10 tonne capacity per 10 cum per 10 sqm & rolling with 8 -10 tonne capacity power roller. ( using bitumen 60 / 70 grade @ the rate of 9.8 Kg/10 sqmt.) note : seal coat is to be provided immediately over the bituminous layer.
200
Sq.m.
56.00
Item No.
12
Description of Items
Unit
513
b)Providing and laying of premix sand seal coat with HMP of appropriate capacity using crushed stone chipping of 6.7 mm size @ 0.06 cum per 10 sqm laying of mixed material with sensor paver and rolling with power roller 8-10 tonne capacity using bitumen 60 / 70 grade @ the rate of 6.8 Kg/10 sqmt.) note : seal coat is to be provided over the premix carpet on the same day.
Sq.m.
201
Item No.
Unit
408
Providing & laying in situ Cement concrete 1:3:6 mix with trap stone aggregate 40 millimetre nominal size mechanically mixed and vibrated in foundation upto a depth of 1.5 metres below ground level and upto a height of 1.50 m.above ground / bed level including formwork, bailingout water, if necessary, curing etc. complete.
Cum.
3480.00
1013
Providing and Laying Reinforced Cement Concrete Pipe NP 4 /Prestressed concrete pipe on first class bedding in single row for culverts of granular material in single row of various diameter in proper line, level and slopeincluding fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets.
Rmt.
a)
900 mm dia
202
Item No.
1
Unit
408
Construction of cement concrete kerb with top and bottom width 115 and 165 respectively, 250 mm high in M 20 grade PCC on M-10 gradeoundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, etc. complete.
Rmt.
801
Painting new letrers and figures of any shade with Per Cm synthetic enamel paint black or any other approved Ht.per colour to give an even shade. letter a) Hindi/Marathi (Matras, commasand the like not to be measured and paid for Half letters shall be counted as half.) b) English and Roman 1.00
800
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Painting lines,dashes,arrows etc. on roads in two coats on new Work Painting lines,dashes,arrows etc. on roads in two coats on New Work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control. a) On New Work I) Over 10 cm in width (White and Yellow) ii) Upto 10 cm in width b) On Old Work I) Over 10 cm in width (White and Yellow) ii) Upto 10 cm in width
803
Sq.M.
801
a) Providing and fixing letters from reflective tape per letter per cm. of approved quality of standard width. height b) Providing and fixing Border from reflective tape per cm. Length of approved quality and standard width.
801
2.00
203
Item No.
6
Description of Items
Providing and applying hot applied thermoplastic compound 2.50 mm thick including reflectorising glass beads @ 250 gms per sqmt. area, thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and holes ect. complete. ( with 3 years guarantee) Supplying and installation of delenator (road way indicators, hazard markers, object markers) 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawing.
Unit
Sq.mt.
803
805
No.
845.00
204
Item No.
Unit
801
Providing and erecting direction and place identification retro- reflectorised sign boards as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, including conveying and fixing firmly to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing with 7 years guarantee for the sheeting etc. complete. Providing and erecting direction and place identification retro- reflectorised sign boards as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 nos. including conveying and fixing firmly to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing with 7 years guarantee for the sheeting etc. complete. Providing Cautionary sign boards 90cm.equliatterial with apex point upward prepared on fiber reinforced plate 3.0 millimeter thick bonded with white retro reflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retro reflective white back ground and red border and back side gray, retro reflective symbols, letters numerals arrow, one M. S. angle post of 65 x 65 x 6milimetre size and 3.65 meter long, inflated bottom and drilled on top and painting posts with white & black border of 25 centimeters, fitting boards to post with 2 numbers of strong G.I bolts and nuts including transportation fixing in executed with prior approval Of Superintending IRC-67 of 2001
Sq.m.
11816.00
801
Sq.m.
12910.00
No. No.
7128.00 8618.00
Item No.
Description of Items
B) i) Information sign boards of size 60 x 80 cm ii) High intencity grade C) i) Prohibitory sign 60cm.Circular ii) High intencity grade boards having size
Unit
No. No. No. No.
Providing & fixing road junction /information sign boards of size-------prepared fiber reinforced plate 4.0 millimeter thick on frame of 40x 40 mm angle with support of 40 mm m.s patti of 6.00 mm thick for strengthening including bonded with blue retro reflective sheeting of Engineering grade having pressure sensitive/heat activated adhesive retro reflective symbols, letter, number, arrows with two m.s angle post of 65 x 65x 6 mm size and 3.65 meter long in one pieces with out joint inflow at bottom and drilled on top with bracing of 40x40 x5 mm m.s angle and painting with white and black border of 25 mm, fixing boards on post with including transportation fixing in 1:4:8 cement concrete block of 60 x 60x 75cm.size at site etc. complete. (The work to be executed with prior approval of Superintending Engineer). IRC-67 of 2001 A) i) ii) B) i) ii) Board size 1.20 X 0.90 meter High intencity grade Board size 1.80 X 0.90 meter High intencity grade No. No. No. No. 18855.00 21547.00 40300.00 47550.00
206
Item No.
Unit
1500 & Providing & laying plain cement concrete 1:3:6 1711 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.
Cu.m.
3282.00
1400 Providing random rubble stone masonry of trap 1405 & stone in cement mortar 1:3 in foundation / sub 2200 structure as per drawing and specification striking joints of non exposed faces and pointing the exposed faces with cement mortar 1:3 including scaffolding and watering including bailing out water manually etc. complete.
Cu.m.
2512.00
1204 & Providing fabricating and setting out cutting edge 1904 of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification etc. complete.
Tonne
69370.00
1209
Providing and filling in wells with well graded sand / rubble and sand /shingle incluing compacting between top and bottom plug.
Cu.m.
722.00
710 IRC Providing Back Filling behind abutment, wing 78 & wall and return wall including watering and 2204 compacting complete as per drawing and technical specification. a) Gravelly material / Trap rubble b) Sandy material c) Filter medium behind abutment,wing wall and return wall complete as per drawing and Technical specification
Cu.m.
207
Item No.
6
Description of Items
a) Providing and cutting bending hooking layingand tying in position HYSD steel bar for reinforcement as per detailed drawings for all RCC members. b) Mild Steel Bar c) Thermo Mechanically Treated Bar
Unit
MT
1600
MT
51859.00 60966.00
1204 & Providing, placing and driving in position 6 mm thick 1904 permanent M.S. liner upto required depth with 12 mm thick M.S. cutting edge of 0 .5 metre lenth of bottom including fabricating, cutting the M.S. sheet to required diametre and shape, welding the joints and driving with the help of required machineries including all materials, labour and lift etc. complete.
MT
77247.00
208
Item No.
Unit
2000
Supplying,fitting and fixing in position true to line & Per level cast steel rocker bearing conforming to tonne IRC:83(Pt-I) Section IX and clause 2003 of capacity MORTH specificationcomplete including all accessories as per drawing and Technical specification.
438.00
2000
Supplying,fitting & fixing in position true to line & Per level fordge steel roller bearing conforming to tonne IRC:83(Pt-I) Section IX and clause 2003 of MoRTH capacity specificationcomplete including all accessories as per drawing and Technical specification.
733.00
2000
Supplying, fitting and fixing in position true to line & Per level sliding plate bearing with PTFE surface tonne sliding on stainless steel complete including capacity accessories as per drawing and technical specification and BS:5400, section9.1& 9.2(forPTTE) and clause 2004 of MORTH specification Supplying,fitting and fixing in position trueto line and level elastomeric bearing conforming to IRC:83(PtI) Section IX and clause 2005 of MoRTH specification complete including all accessories as per drawing and Technical specification. Per Cubic Centimetre
227.00
2000
1.40
2000
Supplying,fitting and fixing in position, true to line Per and level POT- PTFE bearing consisting of a metal tonne piston supported by a disc or unreinforced elastomer capacity confined within a metal cylinder, sealing rings, dust seals, PTEE surface sliding against stainless steel mating surface, complete assembly to be of cast steel / fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, Sections 9.1 & 9..2 and clause 2006 of MoRTH specifications complete as per drawing and approved technical specifications
166.00
209
Item No.
6
Description of Items
Unit
2000
Supplying,fitting and fixing in position,true to lind and Per level sliding plate bearing with stainless steel plate tonne sliding on stainless steel plate with mild steel matrix capacity complete including all accessories as per drawing and technical specifications.
2706
a) Providing weep hoels in plain/reinforced concrete in abutments, riding returen, return wall with 100 mm dia. A.C. pipe, extending through the full width of the structure with slope of 1V : 20 H towards drawing force etc. complete as per drawing andechnical Specification b) Using P.V.C. pipe, 100 mm dia.
Rmt.
121.00
2600
Providing and fixing single strip modular type expansion joint material inclusive of german mported edge beams and elastomeric strip seal along with indigenous fabricated anchorage system for fixing the deck for movement of +/-35 mm (total 70 mm ) as per MORT&H specification under supervision of specilised manufacturere.
210
Item No.
1
Unit
1900 & Providing the railing of mild steel angle post or 2700 mild steel channel post ,mild steel flat ,nuts and bolt as per detailed drawing including scaffolding and fixing complete(As per MORT&H drawing BD/1-88) Providing and laying 22mm thick precast cement concrete chequrred tiles on footpath over 20mm thick bed of cement morter (1:3) ncluding curing and cleaning complete as per the drawing and technical specifications. Providing and fixing G. I. pipe drainage waterspouts complete as per drawing and technical specification (1m length) including M.S.grating 260mm x 260mm
Rmt.
Sq.m.
444.00
2705
No.
1163.00
Painting on kerbs in black and yellow alternate bands complete as per drawing and technical specifications 1500 & Providing Fusion Bonded epoxy coating to 1700 reinforcing bars as per IS:3620-1993 specification for a thickness of 175+/- 50 microns including testing of coating at plant, extra cost for careful handing using PVC coating, binding wires instead of G.I. Wires, touching up the material suplied repair work etc. complete as per detailed specification. (Lead 200 Km to and fro from plant)etc. complete. a) Up to 20mm dia bar (including 20mm dia bar )
803
Sq.m.
82.00
Tonne
12885.00
211
Item No.
Unit
2503
Providing and laying apron With trap / boulder etc. complete as per the drawings and technical specifications. Providing pitching on slopes complete as per drawing and technical specifications . A) with trap stone
Cu.m.
810.00
2504
Cu.m.
810
Providing and erecting W metal beamcrash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above raod/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 millimeter spaced 2m. centre to center, 1.8, metre high, 1.1 metre below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS : 1367 and IS : 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm, 330 mm long complete as per clause 810.
212
Item No.
Unit
2809
Removal of existing cement concrete wearing coat manually on with the help of jack hammers including its disposal complete as per the technical specifications without causing any detrimental effects to any part of the bridge structure.
Cu.m.
369.00
2803
Sealingof cracks by injection process through nipples complete as per drawing and technical specifications with a) Cement grout b) Epoxy grout
Kg.
2804
Applying the epoxy morter over leached honeycombed and spalled concrete surface and exposed steel reinforcement complete as per the technical specifications . Gabian structure for Retaining Earth- Providing and construction of a Gabian structure for retaining earth with segment of wire crates of size 7m x 3m x 0.6m each devided into 1.5m compartments by cross netting, made from 4mm galvanised steel wire @ 32kg per 10 sq.mt. having minimum tensile strength of 300 mpa conforming to is:280 and galvanizing coating conformoing to is:4826, woven into mesh with double twist,mesh size not exceeding 100 x100 mm filled with boulders with least dimension of 200mm all loose ends to be tied with 4mm galvanised steel wire. Spec.No.MORT&H-2503.3.
--
cu.m.
1403.00
213
1 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 9.00 10.00 15.00 20.00 25.00 214
2 15.00 16.00 16.50 17.00 17.25 17.50 17.75 18.00 18.25 18.50 18.75 19.00 19.30 19.60 20.00 25.00 25.00 25.00
3 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00
4 7.48 7.11 6.77 6.48 6.20 5.96 5.74 5.54 5.36 5.19 4.88 4.61 4.37 4.17 4.00 3.64 3.08 2.67
5 13.50 20.22 26.31 31.92 37.00 41.76 46.16 50.31 54.22 57.93 64.54 70.48 75.98 81.06 86.00 115.09 129.08 139.33
6 3.38 5.06 6.58 7.98 9.25 10.44 11.54 12.58 13.56 14.48 16.14 17.62 19.00 20.27 21.50 28.77 32.27 34.83
7 177.28 265.40 345.12 418.55 485.16 547.58 605.27 659.82 711.22 759.48 846.54 924.17 996.55 1063.16 1127.68 1508.99 1692.56 1826.83
8 0.10 0.14 0.19 0.23 0.26 0.30 0.33 0.36 0.39 0.41 0.46 0.50 0.54 0.58 0.61 0.82 0.92 1.00
9 24.00 33.60 45.60 55.20 62.40 72.00 79.20 86.40 93.60 98.40 110.40 120.00 129.60 139.20 146.40 196.80 220.80 240.00
10 11 12 1380.00 1500.00 3081.28 1380.00 1500.00 3179.00 1380.00 1500.00 3270.72 1380.00 1500.00 3353.75 1380.00 1500.00 3427.56 1380.00 1500.00 3499.58 1380.00 1500.00 3564.47 1380.00 1500.00 3626.22 1380.00 1500.00 3684.82 1380.00 1500.00 3737.88 1380.00 1500.00 3836.94 1380.00 1500.00 3924.17 1380.00 1500.00 4006.15 1380.00 1500.00 4082.36 1380.00 1500.00 4154.08 1380.00 1500.00 4585.79 1380.00 1500.00 4793.36 1380.00 1500.00 4946.83
13 308.13 317.90 327.07 335.38 342.76 349.96 356.45 362.62 368.48 373.79 383.69 392.42 400.62 408.24 415.41 458.58 479.34 494.68
14 3389.41 3496.90 3597.79 3689.13 3770.32 3849.54 3920.92 3988.84 4053.30 4111.66 4220.64 4316.59 4406.77 4490.60 4569.48 5044.37 5272.70 5441.52
15
453.13 491.83 531.43 569.31 608.12 645.90 683.09 720.01 756.21 792.23 864.88 936.35 1008.41 1076.88 1142.37 1385.81 1711.91 2038.02
Kms done
Quantity Cost of Quantity Cost of Cost of 6 Hire Total cost Add 10% of diesel diesel at of oil per lit. mazdoor charges 7+9+ over in lit. Rs./lit.52. mobile Rs.240 at Rs. of truck 10+11 head 45 oil Rs.1500 charges
Total of 12+13
1 30.00 35.00 40.00 45.00 50.00 60.00 70.00 80.00 90.00 100.00 125.00 150.00 175.00 200.00 215
2 25.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 40.00 40.00 40.00 40.00
3 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00
4 2.35 2.40 2.18 2.00 1.85 1.60 1.41 1.26 1.14 1.10 1.04 0.94 0.82 0.73
5 147.80 174.00 180.55 186.00 191.00 198.00 203.40 207.60 211.20 214.00 281.00 288.00 295.00 296.91
6 36.95 43.50 45.14 46.50 47.75 49.50 50.85 51.90 52.80 53.50 70.25 72.00 73.25 74.23
7 1938.03 2281.58 2367.59 2438.93 2504.49 2596.28 2667.08 2722.16 2769.36 2806.08 3684.61 3776.40 3841.96 3893.36
8 1.05 1.24 1.29 1.33 1.36 1.41 1.45 1.49 1.51 1.53 2.01 2.06 2.09 2.12
9 252.00 297.60 309.60 319.20 326.40 338.40 348.00 357.60 362.40 367.20 482.40 494.40 501.60 508.80
10 11 12 1380.00 1500.00 5070.03 1380.00 1500.00 5459.18 1380.00 1500.00 5557.19 1380.00 1500.00 5638.13 1380.00 1500.00 5710.89 1380.00 1500.00 5814.68 1380.00 1500.00 5895.08 1380.00 1500.00 5959.76 1380.00 1500.00 6011.76 1380.00 1500.00 6053.28 1380.00 1500.00 7047.01 1380.00 1500.00 7150.80 1380.00 1500.00 7223.56 1380.00 1500.00 7282.16
13 507.00 545.92 555.72 563.81 571.09 581.47 589.51 595.98 601.18 605.33 704.70 715.08 722.36 728.22
14 5577.03 6005.09 6112.91 6201.94 6281.98 6396.14 6484.59 6555.73 6612.94 6658.60 7751.71 7865.88 7945.92 8010.38
15
2373.20 2502.12 2804.09 3100.97 3395.66 3997.59 4599.00 5202.96 5800.82 6053.28 7453.57 8367.96 9690.14 10973.12
STATEMENT 'C-1'
Lead in Cost per km trip Earth, murum, bldg, debris lime 5.75cumt per cumt Sand, Hand crushed Broken Metal, metal Stone Dust 40mm and Timber above 5.75cumt per cumt 5.50cumt per cumt Rubble Steel, Bulk Concrete cement, Bitumen Block and RCC Laterite blocks Stone G.I.sheets 9.00M.T. per M.T. 7.50M.T. per M.T. 6.0cumt Bricks Roofing All types R.C.C. Hume Pipe For C.D. work Tiles of 600 to 800 to 1200mm flooring 750mm 1000mm dia. dia. dia. 15 Rmt. Rmt 5 Rmt. Rmt
0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 9.00
453.13 491.83 531.43 569.31 608.12 645.90 683.09 720.01 756.21 792.23 864.88 936.35 1008.41 1076.88 48.68
78.81 85.54 92.42 99.01 105.76 112.33 118.80 125.22 131.52 137.78 150.41 162.84 175.38 187.28 198.67 8.47 241.01 11.34 297.72 11.34 354.44 11.66 412.73 4.48 435.15
78.81 85.54 92.42 99.01 105.76 112.33 118.80 125.22 131.52 137.78 150.41 162.84 175.38 187.28 198.67 8.47 241.01 11.34 297.72 11.34 354.44 11.66 412.73 4.48 435.15
82.39 89.42 96.62 103.51 110.57 117.44 124.20 130.91 137.49 144.04 157.25 170.25 183.35 195.80 207.70 8.85 251.97 11.86 311.26 11.86 370.55 12.19 431.49 4.69 454.93
96.41 104.64 113.07 121.13 129.39 137.42 145.34 153.19 160.90 168.56 184.02 199.22 214.56 229.12 243.06 10.36 294.85 13.88 364.24 13.88 433.62 14.26 504.94 5.49 532.37
50.35 54.65 59.05 63.26 67.57 71.77 75.90 80.00 84.02 88.03 96.10 104.04 112.05 119.65 126.93 5.41 153.98 7.25 190.21 7.25 226.45 7.45 263.69 2.86 278.01
60.42 65.58 70.86 75.91 81.08 86.12 91.08 96.00 100.83 105.63 115.32 124.85 134.46 143.58 152.32 6.49 184.78 8.70 228.26 8.70 271.74 8.94 316.43 3.44 333.62
75.52 81.97 88.57 94.88 101.35 107.65 113.85 120.00 126.04 132.04 144.15 156.06 168.07 179.48 190.40 8.11 230.97 10.87 285.32 10.87 339.67 11.17 395.53 4.30 417.02
129.47 140.52 151.84 162.66 173.75 184.54 195.17 205.72 216.06 226.35 247.11 267.53 288.12 307.68 326.39 13.91 395.95 18.63 489.12 18.63 582.29 19.15 678.06 7.37 714.89
90.63 98.37 106.29 113.86 121.62 129.18 136.62 144.00 151.24 158.45 172.98 187.27 201.68 215.38 228.47 9.74 277.16 13.04 342.38 13.04 407.60 13.41 474.64 5.16 500.42
4.12 4.47 4.83 5.18 5.53 5.87 6.21 6.55 6.87 7.20 7.86 8.51 9.17 9.79 10.39 0.44 12.60 0.59 15.56 0.59 18.53 0.61 21.57 0.23 22.75
15.10 16.39 17.71 18.98 20.27 21.53 22.77 24.00 25.21 26.41 28.83 31.21 33.61 35.90 38.08 1.62 46.19 2.17 57.06 2.17 67.93 2.23 79.11 0.86 83.40
30.21 32.79 35.43 37.95 40.54 43.06 45.54 48.00 50.41 52.82 57.66 62.42 67.23 71.79 76.16 3.25 92.39 4.35 114.13 4.35 135.87 4.47 158.21 1.72 166.81
90.63 98.37 106.29 113.86 121.62 129.18 136.62 144.00 151.24 158.45 172.98 187.27 201.68 215.38 228.47 9.74 277.16 13.04 342.38 13.04 407.60 13.41 474.64 5.16 500.42
216
10.00 1142.37 15.00 1385.81 65.22 20.00 1711.91 65.22 25.00 2038.02 67.03 30.00 2373.20 25.78 35.00 2502.12
Sand, Hand crushed Broken Metal, metal Stone Dust 40mm and Timber above
Rubble
Steel, Bulk Concrete cement, Bitumen Block and RCC Laterite blocks Stone G.I.sheets
Bricks
Roofing All types R.C.C. Hume Pipe For C.D. work Tiles of 600 to 800 to 1200mm flooring 750mm 1000mm dia. dia. dia.
60.39 40.00 2804.09 59.37 45.00 3100.97 58.93 50.00 3395.66 60.19 60.00 3997.59 60.14 70.00 4599.00 60.39 80.00 5202.96 59.78 90.00 5800.82 25.24 100 125 150 175 200 6053.28 56.01 7453.57 36.57 8367.96 52.88 9690.14 51.31
10.50 487.67 10.33 539.30 10.25 590.55 10.47 695.23 10.46 799.83 10.50 904.86 10.40 1008.84 4.39 1052.74 9.74 1296.27 6.36 1455.30 9.20 1685.24 8.92
10.50 487.67 10.33 539.30 10.25 590.55 10.47 695.23 10.46 799.83 10.50 904.86 10.40 1008.84 4.39 1052.74 9.74 1296.27 6.36 1455.30 9.20 1685.24 8.92 1908.37
10.98 509.83 10.79 563.81 10.71 617.39 10.94 726.83 10.93 836.18 10.98 945.99 10.87 1054.69 4.59 1100.60 10.18 1355.19 6.65 1521.45 9.61 1761.84 9.33 1995.11
12.85 596.61 12.63 659.78 12.54 722.48 12.81 850.55 12.80 978.51 12.85 1107.01 12.72 1234.22 5.37 1287.93 11.92 1585.87 7.78 1780.42 11.25 10.92
6.71 311.57 6.60 344.55 6.55 377.30 6.69 444.18 6.68 511.00 6.71 578.11 6.64 644.54 2.80 672.59 6.22 828.17 4.06 929.77 5.88 5.70
8.05 373.88 7.92 413.46 7.86 452.76 8.03 533.01 8.02 613.20 8.05 693.73 7.97 773.44 3.37 7.47 4.88 7.05 6.84
10.07 467.35 9.90 516.83 9.82 565.94 10.03 666.26 10.02 766.50 10.07 867.16 9.96 966.80 4.21 9.34 6.10 8.81 8.55
17.25 801.17 16.96 885.99 16.84 970.19 17.20 17.18 17.25 17.08 7.21 16.00 10.45 15.11 14.66
12.08 560.82 11.87 620.19 11.79 679.13 12.04 12.03 12.08 11.96 5.05 11.20 7.31 10.58 10.26
0.55 25.49 0.54 28.19 0.54 30.87 0.55 36.34 0.55 41.81 0.55 47.30 0.54 52.73 0.23 55.03 0.51 67.76 0.33 76.07 0.48 88.09 0.47 99.76
2.01 93.47 1.98 103.37 1.96 113.19 2.01 133.25 2.00 153.30 2.01 173.43 1.99 193.36 0.84 201.78 1.87 248.45 1.22 278.93 1.76 323.00 1.71 365.77
4.03 186.94 3.96 206.73 3.93 226.38 4.01 266.51 4.01 306.60 4.03 346.86 3.99 386.72 1.68 403.55 3.73 496.90 2.44 557.86 3.53 646.01 3.42 731.54
12.08 560.82 11.87 620.19 11.79 679.13 12.04 799.52 12.03 919.80 12.08 1040.59 11.96 1160.16 5.05 1210.66 11.20 1490.71 7.31 1673.59 10.58 1938.03 10.26 2194.62
217
807.10 1008.88 1729.51 1210.66 993.81 1242.26 2129.59 1490.71 1115.73 1394.66 2390.84 1673.59 1292.02 1615.02 2768.61 1938.03 1463.08 1828.85 3135.18 2194.62
####### 1908.37
STATEMENT 'C-2'
LOADING, UNLOADING & STACKING
Rates for
Sr. No. Materials Unit Loading Unloading Stacking carriage carriage carriageupt upto 50 m upto 50 m o 50 m lead lead lead 18.00 10.00 32.00 35.00 22.00 1.20 14.00 32.00 14.00 21.00 39.00 12.00 7.00 27.00 28.00 19.00 1.20 11.00 32.00 10.00 16.00 28.00 11.00 7.00 12.00 21.00 11.00 1.20 10.00 9.00 6.00 12.50 16.50
1 2 3 4 5 6 7 8 9 10 11
Boulders, Rubble stones and metal of all the sizes Murum, Sand Gravel, stone dust, Earth and other loos materials. Cement, Lime Mild Steel and H.Y.S.D. bars of all the diametres and structural steel. Bricks Shahabad Stones Manglore tile, Ridges, Hips, single Allahabad Tiles and Country Tiles. R.C.C. pipes with collars Timber Flooring tiles Asphalt pack tins
Cu.m. Cu.m. M.T. M.T. 1000 Nos. Sq.M. 1000 Nos. M.T. Cu.m. 1000 Nos. M.T.
Transportation charges by Head load Sr.No. 1 2 3 Description of leads 0 metres to 50 metres (initial lead 50mt.) 51 meters to 100 metres 101 metres to 200 metres Unit Cu.m. Cu.m. Cu.m. 2011-2012 2012-2013 17.50 13.20 21.00 18.00 13.50 21.50
218
Rate as per Minimum Wages LABOUR RATES (Per day) For Raigad D.S.R.2012-2013
Sr. Description No. 1 Asphalt Sprayer Skilled 2 Assistant plumber, skilled 3 Bandhani Semiskilled 4 Barbender Skilled 5 Beldar Skilled 6 Below Boy 7 Bhisti (mixing/curing) semi-skilled 8 Blacksmith with tools second class 9 Boreman skilled 10 Breaker Semiskilled 11 Carpenter second class skilled 12 Carpenter first class, skilled 13 Chiseller, semiskilled 14 Compressor operator 15 Ecavator, heavy unskilled 16 Electrician 17 Engraver for lettering skilled 18 Fitter second class with tools, skilled 19 Fitter first class with tools, skilled 20 Foreman, skilled 21 Glazer with tools, skilled 22 Gunman for Guniting 23 Head Fitter with tools, skilled 24 Helper, unskilled 25 Hole driller, semiskilled 26 Jack Hammer operator 27 Khalashi / Diver 28 Laboratory Assistant 29 Labour for traffic regulations 30 Labour for excavation in Hard rocl (un-blast) 31 Labour for tile truning 32 Lorry driver / mixer operator 33 Maistry Skilled / Supervisor 34 Mason second class skilled 35 Mason first class skilled
Rates Sr.
Description
Rates
266.00 266.00 274.00 270.00 270.00 277.00 274.00 270.00 277.00 270.00 270.00 274.00 270.00 277.00 270.00 270.00 270.00 277.00 270.00 274.00 274.00 274.00 266.00 277.00 266.00 274.00 274.00 266.00 270.00 270.00 270.00 266.00 270.00 274.00
No. 274.00 36 Mazdoor, unskilled Heavy / male 274.00 37 Mazdoor, unskilled light / female 270.00 38 Mechanic 274.00 39 Minor or blaster semiskilled 274.00 40 Navaghani 266.00 41 Painter first class, skilled 270.00 42 Painter second class, skilled 274.00 43 Painter (white washer) semi skilled 274.00 44 Plumber with tools, skilled 270.00 45 Polishman, semi skilled 277.00 46 Quarry man semiskilled 277.00 47 Skilled Labour 270.00 48 Stonecutter with tools, semiskilled 270.00 49 Supervisor 266.00 50 Tar Handler, Semiskilled 274.00 51 Tile Turner, Semiskilled 277.00 52 Tinsmith with tools, semiskilled 274.00 53 Traffic enumerator 277.00 54 Tree cutter, semiskilled 274.00 55 Vibrator Operator (skilled) 274.00 56 Welder/driller, skilled 274.00 57 Watchman 277.00 58 Mazdoor 266.00 59 Black smith with tools, 1st class 270.00 60 Carpenter third class for fencing and roofing work 274.00 274.00 61 Nozzleman for Guniting work 277.00 62 Polishman 1st class for furniture work 266.00 63 Room Boy 266.00 64 Mason third class 65 Mali 266.00 66 Sweeper wet 274.00 67 Sweeper Dry 277.00 68 Welder 2nd class 274.00 69 Plumber with tools 2nd class 283.00
219
Description
A.C. Bend 100 mm A.C. Bend 75 mm A.C. Collar A.C. Cowl Dome 100 mm dia A.C. Cowl Dome 75 mm dia A.C. Cowl Vent 100 mm dia A.C. Cowl Ventilator 100 mm A.C.Corrugated Sheet 6 mm thick A.C. Double 'Y' Junction 100 mm A.C. Double 'Y' Junction 150 mm A.C. Double 'Y' Junction 75 mm A.C. pipe 100 mm diameter A.C. pipe 150 mm diameter A.C. plain sheet 6 mm thick A.C. plug bend 100 mm dia A.C. plug bend 150 mm dia A.C. plug bend 70 mm dia A.C. rain water pipe 100 mm dia A.C. rain water pipe 150 mm dia A.C. rain water pipe 75 mm dia A.C. sheet 4.0 milimetre thick plain A.C. sheet ridge A.C. sheets (trafford) 6 mm thick A.C. shoe 100 mm dia A.C. Shoe 75 mm dia. A.C. Shoe for 150 mm dia. Accoustic Board (60 x 60 cm) Acrylic Plain Sheet - 2 mm thick Acrylic Plain Sheet - 3 mm thick Acrylic Plain Sheet - 4 mm thick Acrylic Washable Distemper Aldrop 300 x 16 mm chromium plated Aldrop 300 x 20 mm-Brass oxidised Aldrop Aluminium 300 x 16 mm Aldrop Iron Oxidised 300 mm long (20 mm dia) Alluminium Jali Aluminium Sections Aluminium Sheet 24 B w.g. Aluminium Sliding door bolt Aluminium Stay Aluminium Strips Anglo Indian Orissa - White Anglo Indian W.C.Pan - White
Unit
No. No. No. No. No. No. No. Sq.M. No. No. No. M M Sqm. No. No. No. M M M Sqm. Pair Sqm. No. No. No. No. Sq.M. Sq.M. Sq.M. Per Litre No. No. No. No. Sq.M. Kg. Sqm. No. No. Kg. No. No.
Final Rate
83.00 69.00 55.00 86.00 84.00 92.00 85.00 364.00 116.00 145.00 90.00 92.00 131.00 305.00 108.00 185.00 93.00 93.00 151.00 87.00 204.00 242.00 281.00 67.00 56.00 91.00 103.00 800.00 957.00 1460.00 127.00 219.00 607.00 164.00 117.00 1690.00 284.00 476.00 96.00 73.00 286.00 1845.00 1694.00
220
Sr. No.
44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
Description
Ball cock 12 mm dia. cromium plated Ballcock 15 mm dia with P.V.C. float Ballcock 25 mm dia with P.V.C. float Barbed Wire Basin & foundation- Brass Chromium plated Bearing roller for glazed window shutter Bed washer Bees wax Bell mouth cover (100 mm) dia Bend 110 mm-PVC Bend 75 mm dia -plain-PVC Bend 75 mm-PVC Bend/plug (18 guage) G.I. Bib stop tap brass heavy 15 mm Bib stop tap brass heavy 25 mm Bib tap 12 mm brass medium Bib tap 12 mm cast iron Bid stop tap brass heavy 20 mm Binding wires Bitumen (compound) Bitumen fillers Bitumen pad 25 mm thick Bitumen washers Bituminous felt Black bakelite seat to European closet pan Black kadappa (hand cut) 25 mm thick Black kadappa (Machine cut) 25 mm thick Black kadappa 40 mm / 35 mm. Black Kadappa stone 25 mm thick rough Black Kadappa stone 50 mm thick rough Black Kadappa stone polished 1.5 x 0.45 m size Black kadappa stone-Both sides polished Blasting powder Block Board 25 mm thick Boiled Linseed oil Boll Cock 40 mm dia and PVC float Boll Cock 50 mm dia and PVC float Box chamber with lock Bracket chromium plated Brass nozzle pillar Tap 12 mm Brick bats Bricks (I class) Bricks (II class) Bricks Aggregate (20 to 40 mm)
Unit
No. No. No. Kg No. No. Kg Kg No. No. No. No. No. No. No. No. No. No. Kg Kg Kg Sqm. Kg Sqm. No. Sqm. Sqm. Sqm. Sqm. Sqm. No. Sqm. Kg Sqm. Litre No. No. No. No. No. Cum. No. 1000 Nos. Cum.
Final Rate
186.00 247.00 295.00 92.00 635.00 68.00 72.00 58.00 69.00 206.00 101.00 151.00 149.00 223.00 386.00 172.00 90.00 276.00 100.00 63.00 51.00 1671.00 65.00 99.00 65.00 405.00 418.00 441.00 386.00 476.00 345.00 592.00 202.00 61.00 140.00 1136.00 1873.00 226.00 110.00 326.00 502.00 5.50 4036.00 347.00
221
Sr. No.
88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131
Description
Broken china tiles Broken mosaic tiles Brush for lettering Brush for road marking 4" dia. Butt hinges 125 mm-Brass oxidised Butt hinges aluminium 100 mm Butt hinges aluminium 125 mm Butt hinges aluminium 90 mm Butt hinges iron oxidised 100 mm Butt hinges iron oxidised 125 mm Butt hinges iron oxidised 90 mm C.C. septic tank 0.90 m dia and 2.50 m long C.C. septic tank 1.20 m dia and 2.50 m long C.I. bend 100 mm C.I. brackets C.I. coller 100 mm dia C.I. coller 150 mm dia C.I. coller 75 mm dia C.I. cover 45 x 30 cm with frame C.I. cover with frame (gully trap) C.I. cow/vent 100 mm dia C.I. cow/vent 150 mm dia C.I. cow/vent 75 mm dia C.I. grating 100 mm dia. C.I. grating 75 mm dia. C.I. manhole cover (75 kg) C.I. manhole cover 32 kg C.I. Nahani trap 100 mm dia C.I. Nahani trap 75 to 80 mm dia C.I. pipe 100 mm dia C.I. pipe 150 mm dia C.I. pipe 75 to 80 mm dia C.I. plug bend 100 mm dia C.I. plug bend 150 mm dia C.I. shoe 75-100 mm dia (18 guage) C.I. Tee C.I. Trap Grating 15 x 10 cm C.I. 'Y' junction 100 mm dia C.I. 'Y' junction 150 mm dia C.I. 'Y' junction 75 mm dia C.T.W. above 2.5 m length C.T.W. batten 50 x 25 mm C.T.W. battern 50 x 12 mm C.T.W. bullies 100mm dia
Unit
Kg Kg No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. M M M No. No. No. No. No. No. No. No. Cum. M. M. M.
Final Rate
51.00 30.00 82.00 146.00 97.00 50.00 71.00 45.00 31.00 72.00 28.00 12768.00 15243.00 237.00 77.00 236.00 556.00 227.00 732.00 295.00 518.00 213.00 125.00 65.00 60.00 1141.00 866.00 380.00 338.00 1133.00 1928.00 1096.00 375.00 652.00 382.00 547.00 266.00 556.00 1678.00 529.00 84684.00 108.00 111.00 126.00
222
Sr. No.
132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
Description
C.T.W. bullies 125mm dia C.T.W. bullies 150mm dia C.T.W. frame superior C.T.W. girder (joist) C.T.W. Particle board face laminated C.T.W. Plank 1 to 2 metre length C.T.W. Plank 15 to 50 mm thick 10 - 15 cm/wide C.T.W. Plank 20 mm thick 10 - 15 cm wide C.T.W. Pulins/Planks in General C.T.W. sash bars/T.W. glass beading C.T.W.plank superior Cast iron hinged cover with frame Cast iron shoe for 150 mm dia cast iron-Bend Cellular core flush door 35 mm thick Cement bag-Empty Cement- Coloured Cement paint Centering oil Ceramic tiles marble finish 200 x 200 mm Ceramic tiles marble finish 300 x 300 mm Ceramic tiles Plain Coloured 200 x 100 mm Ceramic tiles Plain Coloured 200 x 200 mm chain 12 mm dia-G.I. chain 28 mm dia-G.I. Charcoal Chequrred cement tile Chicken proof jali mesh clamp 100 to 150 mm pipe-G.I. clamp for 40 to 80 mm dia pipe-G.I. Clamp for G.I. pipe Clamps-PVC Coal tar Collapsible gate complete with accessories Collers-PVC Colour powder (yellow earth) Colours Connector for W.C.-PVC Corner stones 38 x 20 x 30 cm Corner/quions 30 x 20 x 30 cm Coupling cast iron 80 mm Coupling cast iron 100 mm Cow Dung Cowl \-dome- 110 mm outer diemater-P.V.C.
Unit
M. M. Cum. Cu.M. Sq.M. Cu.M. Cu.M. Cu.M. Cum. Cu.M. Cu.M. No. No. No. Sqm. No. Kg Kg Litre Sqm. Sqm. Sqm. Sqm. M M Kg Sqm. Sqm. No. No. No. No. Kg Sqm. No. Kg No. No. No. No. No. No. Kg No.
Final Rate
141.00 149.00 96488.00 83398.00 1093.00 73698.00 81620.00 95840.00 75336.00 65165.00 96099.00 415.00 345.00 38.00 1261.00 16.00 82.00 108.00 79.00 1119.00 1109.00 1031.00 1026.00 49.00 56.00 28.00 421.00 401.00 56.00 62.00 11.00 32.00 49.00 3391.00 100.00 23.00 1722.00 434.00 57.00 68.00 163.00 181.00 28.00 70.00
223
Sr. No.
176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218
Description
Cowl dome - 100 mm. Dia-A.C. Crimped wire mesh D.D.V.P. 100% emulsion concentration Detonator Double acting spring hinges-Brass Dungry cloth 42" wide Engraver for lettering skilled Epoxy coal tar for 1st coat/2nd coat F.R.P. Door Shutter 30mm thick F.R.P. Door Shutter Frame 35mm thick Face veneer board 20 mm thick Ferrule for C.I. pipe 100 mm Fevicol Fire bricks Fire wood Flooring Roll 1 mm thick, 2m. Wide.-PVC Flush tank 10 litre capacity-Low level glazed Flush tank Automatic for Urinal 10 Litre Flushing cistern 5 litre capacity Flushing cistern -Coloured H.D.P. - conforming to I.S7231/1994 Flushing cistern -White H.D.P. conforming to I.S.7231/1994 Flushing tank for W.C.-Enamelled Flushing Tank-PVC Fly proof G.I. wire mesh Foot rest chequerred 25 x 10 cm Formica Lamination Sheet Fountain jet-Brass Chromium plated French Polish Fuse G.C.I. sheets (corrugated) 22BwG Gasket Gasket-PVC Glass 3 mm thick Glass 4 mm thick Glass 5 mm thick Glazed tiles 15 x 15 cm- Colour Glazed tiles 20 x 10 cm-Colour Gravel at Nalla Bed Gully trap cover with frame Gun metal stop cock crutch wheel 20 mm Gun metal stop cock crutch wheel 25 mm Gun metal stop cock crutch wheel 32 mm Gun metal stop cocks crutch 15 mm cl. wheel
Unit
No. Sqm. Litre No. No. Mtr. Sqm. Litre Sq ft Rmt. Sqm. No. Kg No. Quintal M No. No. No. No. No. No. No. Sqm. Pair Sqm. No. Litre No. MT Rmt M. Sqm. Sqm. Sqm. Dozen No. Cum. No. No. No. No. No.
Final Rate
97.00 135.00 208.00 57.00 514.00 38.00 465.00 390.00 468.00 1255.00 581.00 427.00 250.00 22.00 408.00 468.00 1132.00 1557.00 793.00 1591.00 1265.00 1189.00 1089.00 146.00 133.00 909.00 157.00 138.00 19.00 57186.00 15.00 25.00 352.00 400.00 437.00 259.00 36.00 189.00 129.00 204.00 224.00 242.00 191.00
224
Sr. No.
219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262
Description
Gun metal stop tap & crutch wheel 20 mm Gun metal stop tap & crutch wheel 25 mm Half round chromium ware pipe 100 mm Half round earthenware pipe 100 mm Half turn flush cock 25 mm dia Hand Rail-PVC Handle 125 mm Chromium plated Handle aluminium 125 mm Handle for steel windows 150 mm Handle-ornamental-Brass Handles 100 mm -Brass oxidised Hard Board 6 mm thick Hard murum Hemp rope Heritage grains plasters Hinges 125 mm (Chromium plated) Hinges 125 mm-Brass oxidised Hinges 75 mm-Iron Hinges iron chromium plated 100 mm Hold fast 300 x 40 x 5 mm-Iron Holdfast strong for steel gate-Iron Hollow blocks CC'0.1 x 0.2 x 0.4 M Hollow blocks CC'0.2 x 0.2 x 0.4 M Hook and eye aluminium 75 mm Hook and eye chromium plated Hook and eye iron oxidised 75 mm Hook and eyes 225 mm iron oxidised Hooks "J" 6 mm dia-G.I. Hooks and eyes 200 mm-Brass oxidised Housing box to Rolling shutter Hume pipe septic tank 0.9 m dia (2.5 m) IRC fabric 150 x 150 mm and 10 guage IRC fabric 75 x 75 mm and 10 guage J.W. Ballies J.W. planks & in general Junction plug 110 mm dia.-PVC Khandkies Kota stone (hand cut) 25 mm thick Kota stone (machine cut) 25 mm thick Kota stone 25 to 30mm thick 55 x 55cm wide-Polished Kota stone step (polished) Laminate board 20 mm thick (10-15 cm wide) Latch 250 mm long iron oxidised Laterite oversize metal 80 mm
Unit
No. No. M M No. M. No. No. No. No. No. Sqm. Cum. Kg Sqm. No. No. No. No. No. No. No. No. No. No. No. No. No. No. Sqm. No. Sqm. Sqm. M Cum. No. No. Sqm. Sqm. Sq.M. Sqm. Sqm. No. Cum
Final Rate
249.00 294.00 449.00 626.00 65.00 63.00 67.00 65.00 61.00 323.00 124.00 223.00 102.00 108.00 594.00 125.00 126.00 26.00 56.00 39.00 56.00 22.00 34.00 50.00 55.00 15.00 25.00 16.00 85.00 2668.00 10398.00 88.00 61.00 64.00 35161.00 433.00 49.00 977.00 905.00 726.00 711.00 795.00 204.00 377.00
225
Sr. No.
263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306
Description
Laterite rubble on quarry Lead paint-White Lead pipe 32 mm dia Lead pipe 40 mm dia Lead pipe plate Lime (un-slaked) Lime filler for bituminous works Lime powder Lime slaked (fine lime) Linseed oil double boiled Locking arrangement sliding shutter Makrana Marble Slab 25 mm-White Mangalore glass tile Mangalore pattern cowl vent Mangalore ridge / hip tiles Mangalore tiles class A'A Marble chips Marble colour powder Marble mosaic chequred tiles Marble mosaic tiles (gray cement base) Marble mosaic tiles (white cement base) Marble name plate Marble powder Mechanical gearbox to rolling shutter Metal Grade I 90 mm to 40 mm Metal Grade II 63 mm to 40 mm Metal Grade III 50 mm to 20 mm Mirror 40 x 50 C.M. Mohagani Seat With Lid Mortice Lock Superior Mosaic tiles (white cement)-Colour Mosquito Proof Coupling Mosquito Proof Jali 26 gauge Mosquito Proof Nylon Net Murum Neel Neeru Netlon PVC Mosquito Proof Jali Netlon PVC Sponge liner Male & Femle Nipple For Fastening Detonator Noble Dynamite Non Return Valve 15 mm Non Return Valve 20 mm Water metre Non Return Valve 25 mm Water metre
Unit
Cum. Kg. M M Kg Kg Kg Kg Kg Litre No. Sq.M. No. No. No. No. Kg Kg Sqm. Sqm. Sqm. Sqm. Kg No. Cum. Cum. Cum. No. No. No. Sqm. No. Sq.M. Sq.M. Cum. Kg. Kg. Sq.M. M. No. Kg. No. No. No.
Final Rate
299.00 292.00 297.00 371.00 180.00 16.00 18.00 21.00 18.00 115.00 73.00 2825.00 629.00 135.00 45.00 25.00 23.00 26.00 399.00 342.00 411.00 6346.00 13.00 920.00 475.00 509.00 602.00 794.00 334.00 720.00 430.00 55.00 285.00 61.00 105.00 178.00 21.00 365.00 130.00 23.00 135.00 295.00 495.00 621.00
226
Sr. No.
307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350
Description
Non Teak/Jungle Wood (normal) Nut 12 mm dia.-Steel Nut 16 mm dia.-Steel Nut and bolts-G.I. Nut Bolt 16 mm Dia/nails Nuts and Bolts 16 mm Dia. Nylon Rope Obscured Glass 3 mm Thick Oil Bound Distemper Oil Paint Oil Paint 100ml pack Tin-White Oil Paint.-Zinc Based Paint - Coloured-Acrylic Paint - White-Acrylic Paint / flat paint-Enamelled Paint-Aluminium Paint-Road marking paint-White Zink Partical Board 12 mm Thick Pedestal (urinal Pan) colour glazed Pedestal (urinal Pan) White glazed Pedestal for Wash Basin Phenol formaldehyde synthetic resin Piller Tap 12 mm dia Chromium plated Pin Header Standard Size pipe 100 mm dia heavy type-G.I. pipe 100 mm dia medium-G.I. Pipe 100 mmdia.-PVC Rainwater Pipe 15 mm dia heavy type-G.I. pipe 15 mm dia medium type-G.I. Pipe 15 mm dia.-PVC pipe 20 mm dia heavy type-G.I. pipe 20 mm dia medium type-G.I. Pipe 20 mm dia.-PVC pipe 25 mm dia heavy type-G.I. pipe 25 mm dia medium type-G.I. Pipe 25 mm dia.-PVC pipe 32 mm dia heavy type-G.I. pipe 32 mm dia medium type-G.I. Pipe 32 mm dia.-PVC pipe 40 mm dia heavy type-G.I. pipe 40 mm dia medium type-G.I. Pipe 40 mm dia.-PVC pipe 50 mm dia heavy typeG.I.
Unit
Cu.M. No. No. Kg No. Kg. Kg. Sq.M. Kg. Litre No. Litre Per Litre Per Litre Litre Litre Litre Kg. Sq.M. No. No. No. Kg. No. No. M M M M M M. M M M. M M M. M M M. M M M. M
Final Rate
31429.00 17.00 24.00 143.00 16.00 130.00 256.00 397.00 148.00 295.00 65.00 402.00 446.00 436.00 465.00 348.00 402.00 190.00 612.00 1877.00 1600.00 1105.00 325.00 324.00 80.00 820.00 775.00 279.00 148.00 131.00 43.00 155.00 143.00 49.00 183.00 171.00 63.00 222.00 211.00 78.00 282.00 239.00 102.00 319.00
227
Sr. No.
351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391
Description
pipe 50 mm dia medium type-G.I. Pipe 60 mm dia.-PVC pipe 65 mm dia heavy type-G.I. pipe 65 mm dia medium type-G.I. Pipe 75 mm dia-PVC Rainwater pipe 80 mm dia heavy type-G.I. pipe 80 mm dia medium type-G.I. Pipe for roof 20 mm dia.-Steel Pipe for roof 25 mm dia.-Steel Pipe for roof 40 mm dia.-Steel Pipe for roof 50 mm dia.-Steel Pipe for roof 65 mm dia.-Steel Pipe for roof 75 mm dia.-Steel Plain G.I. Sheet 24 B.W.G. Plaster of Paris Board 45 x 45 cm. Plastic Cover Block Plastic Emulsion Paint Plug bend - 3"-P.V.C. Plug bend - 4"-P.V.C. plug bend (18 guage) for 75 to 100 mm dia pipe-G.I. Ply veener 4 mm thick-Decorative Ply Wood 12 mm thick Ply Wood 6 mm thick Ply Wood 9 mm thick Polymer based for 1st coat Polymer based for 2nd coat Polymer based for IInd coat for water proof external coating Polysafe-EC (patent No. 571) Polymer based for IInd coatWater proof external coating Polysafe EC (Patent No. 571) Polymer based for Ist coat for water proof external coating Polysafe-EC (patent No. 571) Polymer based primer (polysafe EC P.No. 569) Polymer plastone for Polymar Mortar and application Patent No. 568 Polythene sheet-Expanded Primer for Plaster Surface Push button tap of gun metal 15 to 25 mm Putty for Cement Plaster PVC Door shutter 35 mm thick 7' x 3' size PVC Flushing tank automatic 5 litre for urinal PVC flushing tank for W.C. 10 Litres. Quarry Spouls (trap Rubble) R.C.C. cover for gully trap 23 x 30 cm R.C.C. cover for inspection chamber 60 x 45 cm
Unit
M M. M M M M M M. M. M. M. M. M. Sq.M. No. No. Kg. No. No. No. Sqm. Sq.M. Sq.M. Sq.M. Litre Litre Litre Litre Litre Litre Litre Sqm. Litre No. Kg. No. No. No. Cu.M. No. No.
Final Rate
298.00 123.00 418.00 275.00 341.00 592.00 483.00 141.00 171.00 253.00 308.00 431.00 683.00 416.00 77.00 9.00 444.00 153.00 181.00 163.00 469.00 1018.00 531.00 647.00 772.00 938.00 710.00 710.00 646.00 749.00 558.00 244.00 128.00 126.00 69.00 3121.00 569.00 1146.00 265.00 88.00 274.00
228
Sr. No.
392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435
Description
R.C.C. cover for inspection chamber 90 x 45 cm R.C.C. Jali 100mm thick R.C.C. Jali 50 mm thick R.C.C. Jali 80mm thick R.C.C. Pipe 100 mm dia. R.C.C. Pipe 150 mm dia. R.C.C. Pipe 225 mm dia. R.C.C. Pipe 300 mm dia. Red Oxide paint Red Powder (Geru) Red Tape Saftey Fuse Reflective Sheet High intensity grade Retoreflective Sheet Engineering grade Ridge Cap (plain G. I.) Rubber Adhesive Rubber Gasket Rubber Insertion Rubber Lining Rubber ring Rustonil - Rust remover cum phosphating agent Rustonil - Rust Remover cum-phosphating Patent No.569 Salt Glazed Stoneware gully Trap Sand (screened) Sand (unscreened) Saras Scraping sand paper screw (25 mm)-Iron screw (couch) 50 mm-G.I. screw 100 mm-G.I. screw 125 mm-G.I. screw bolts-G.I. Screws 75 mm-G.I. Screws-Aluminium Screws-Brass Seal Cement paint Sewer Trap Shahabad 25 to 30 mm thick-Rough Shahabad 40 to 50 mm thick-Rough Shahabnad 20 mm thick-Rough Shahbad 25-30 mm thick-Polished Shahbad for steps (25 mm) thick-Polished Shahbad machine cut 25 mm thick-Polished Shahbad stone 55 x 55 cm wide-Polished sheets plain 22 guage (1.2 x 1.8 m)-G.I.
Unit
No. Sq.M. Sq.M. Sq.M. M. M. M. M. Kg. Kg. M. Sq.M. Sq.M. M.T. Litre M. Kg. M. No. Litre Litre No. Cu.M. Cu.M. Kg. Kg. Dozen Dozen Dozen Dozen No. Gross Dozen Gross Kg. No. Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. No.
Final Rate
361.00 899.00 455.00 599.00 230.00 313.00 377.00 523.00 176.00 23.00 39.00 11160.00 8798.00 53345.00 330.00 22.00 73.00 20.00 34.00 516.00 475.00 114.00 1147.00 909.00 120.00 65.00 72.00 166.00 322.00 345.00 6.00 109.00 17.00 467.00 95.00 303.00 190.00 220.00 177.00 370.00 384.00 419.00 397.00 847.00
229
Sr. No.
436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479
Description
Shoe-PVC Shower (bath) (telephonic type) Shower Rose chromium Plated Brass 10 cm sink 0.6 x 0.2 x 0.45 M-White glazed earthen ware Sink White glazed 45 x 20 x 30 cm. Sliding Door Bolt (Tadi) Sliding door bolt 300 mm-Brass oxidised Sliding door bolt-Brass oxidised Sliding Door Bolts Chromium Plated Slotted cowl/vent-75 mm dia -PVC Socket 32 mm dia.-PVC socket 40 mm / rivets 12 mm-G.I. Socket Brass for 32 mm Tap Socket Brass for 40 mm Tap Socket Brass for 50 mm Tap Socket Brass for 65 mm Tap Socket for 100 mm Tap Socket for 15 mm Tap Socket for 20 mm Tap Socket for 25 mm Tap Socket for 32 mm Tap Socket for 40 mm Tap Socket for 50 mm Tap Socket for 65 mm Tap Socket for 80 mm Tap Socket for G.I. Pipe 150 mm Dia. Soil pipe 110 mm dia.-PVC Solid core shutter (commercial 35 mm) thick Solid core shutter 35mm with TW veneeer on both side Solvent Solvent Cement Sprit for wood polishing Spun Yarn square mesh - 16 guage 3 feet wide-G.I. Standard butt Hing Brass Oxidised 100 mm Standard strap Hing Iron oxidised 200 mm Steel Primer Steel Sink - 40 x 30 cm. Steel Sink - 60 x 45 cm. Stone Dust Stone Ware Pipe 100 mm dia. Stone Ware Pipe 150 mm dia. Stone Ware Pipe 225 mm dia. Stop Tap Brass with C Wheel 15 mm
Unit
No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. M. Sq.M. Sq.M. Litre Litre Litre Kg. M No. No. Litre No. No. Cu.M. M. M. M. No.
Final Rate
124.00 575.00 238.00 1132.00 1288.00 64.00 406.00 264.00 63.00 59.00 23.00 32.00 50.00 59.00 76.00 90.00 125.00 42.00 43.00 51.00 53.00 68.00 93.00 108.00 114.00 123.00 296.00 1856.00 2786.00 44.00 101.00 102.00 137.00 291.00 102.00 41.00 128.00 3716.00 4552.00 304.00 149.00 205.00 331.00 210.00
230
Sr. No.
480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523
Description
Stopper For Steel Window Strainer 15 mm Strainer 20 mm Strainer 25 mm Strainer for 10 mm Strainer for 40 mm Strainer for 50 mm Strainer for 80 mm Strong Iron bolts 100 mm dia. SWG Pipe half round 100 mm dia. Synthetic Paint (Enamel)
Unit
Final Rate
55.00 41.00 154.00 233.00 35.00 471.00 597.00 1652.00 69.00 102.00 278.00 723.00 878.00 1020.00 360.00 401.00 510.00 446.00 592.00 107.00 68.00 35.00 567.00 552.00 324.00 108.00 68.00 24.00 264.00 132.00 182.00 141.00 316.00 163.00 202.00 236.00 235.00 49.00 83.00 99.00 90.00 119.00 120.00 161.00
No. No. No. No. No. No. No. No. Kg. M. Litre Synthetic Polymer based for 1st coat polysafe E.C. (P.No.567) Litre Synthetic Polymer based for 2nd coat polysafe E.C. (P.No.567) Litre Synthetic Polymer based primer polysafe E.C. (P.No.567) Litre Tandur (hand cut) 25 mm thick Tandur 25 mm thick (machine cut) Tandur 40 mm thick-Polished Tandur Polish For Steps Tandur stone 25 mm thick and 55 x 55 cm wide-Polished Tar Felt Tar Paper 3 mm Thick Tarat (gunny cloth) Thermoplastic paint white Thermoplastic paint Yellow Thimble socket 32 mm-Brass Thinner Throughstone Tile 20 x 10 cm-White glazed Tiles 15 x 15 cm-White Glazed Towel Rod with Clamps 16 mm dia. Tower Bolt 150 mm Iron Oxidised Tower bolt 150 mm-Brass oxidised Tower bolt 250 mm-Brass oxidised Tower Bolt Aluminium 150 mm Tower Bolt Aluminium 200 mm Tower Bolt Aluminium 250 mm Tower Bolt Aluminium 300 mm Tower Bolt Aluminium 75 mm Tower Bolt Iron Oxidised 200 mm Tower Bolt Iron Oxidised 250 mm Tower Bolt Iron Oxidised 300 mm Tower Bolts 200 mm chromium plated Tower bolts 200 mm-Brass oxidised Tower Bolts 250 mm chromium plated Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. Sq.M. Litre Litre Pair Litre No. No. Dozen No. No. No. No. No. No. No. No. No. No. No. No. No. No. No.
231
Sr. No.
524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567
Description
Tower Bolts 300 mm chromium plated Tower bolts 300 mm-Brass oxidised Transferent Corrugated Sheets Fibre Transparent glass 5 mm thick Trap grating 15 x 10 cm.-PVC Trap Header (17 x 22 x 60 to 75cm) Trap Header ordinary Trap metal 12 mm/10mm (crushed) Trap metal 20 mm (crushed) Trap metal 25 mm (crushed) Trap metal 40 mm (blasted) H.B. Trap metal 40 mm (crushed) Trap metal 40 mm unblasted (Boulder) Trap metal 50 mm hand broken Trap metal 50 mm unblasted (Boulder) Trap metal 6 mm crushed Trap metal 60 mm hand broken Trap metal 60 mm unblasted (Boulder) Trap metal 80 mm hand broken Trap metal 80 mm unblasted (Boulder) Trap Rubble (unblasted for metal) Trap Rubble 15-23 cm @ Quarry (metal) Trap Rubble 15-23 cm @ Quarry for (masonary) Trensferent Corrugated Sheets P.V.C. Turpentine Union 25 mm dia-G.I. Urinal Colour glazed full stall type Urinal -Flat Back Urinal Lipped type Urinal semi stall Urinal-White Glaged full Stall Varnish Venner 4 mm thick Vent-PVC W.C. pan-Colour glazed European type W.C. Pan-European type glazed W.C. pan-W.G.L. European type coupled closet W.C.580 mm white glazed Ist Class (Orissa) W.C.Pan (White)-Europian type W.C.pan 580 mm I Class with Trap (Indian) W.C.pan colour glazed 23" (Indian) W.C.pan colour glazed 23" (Orissa) wash basin 0.45 x 0.3 x 0.2-White Glazed Wash basin 63 x 45 cm-Colour glazed
Unit
No. No. Sq.M. Sq.M. No. No. No. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Cu.M. Sq.M. Litre No. No. No. No. No. No. Litre Sq.M. No. No. No. No. No. No. No. No. No. No. No.
Final Rate
206.00 179.00 772.00 572.00 323.00 75.00 69.00 563.00 609.00 598.00 388.00 409.00 344.00 403.00 344.00 458.00 380.00 318.00 371.00 291.00 311.00 370.00 296.00 500.00 73.00 89.00 4326.00 856.00 682.00 1007.00 2564.00 150.00 488.00 74.00 1485.00 1019.00 6250.00 2242.00 1366.00 951.00 933.00 1905.00 1135.00 1827.00
232
Sr. No.
568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609
Description
wash basin 63 x 45 cm-White Glaged Wash Basin Colour glazed 45 x 30 cm Wash Basin Colour glazed 56 x 38 cm Wash Basin White glazed 55 x 40 cm Wash hand basin 55 x 40 cm.-Colour Washable Distemper (powder) washer 12 to 16 mm-Iron Water Meter 100 mm Non return valve Water Meter 15 mm (non return valve) Water Meter 20 mm (Non return valve) Water Meter 25 mm (Non return valve) Water Meter 40 mm Non return valve Water Meter 50 mm Non return valve Water Meter 80 mm Non return valve Water Meter Box with Lock 15 mm Water Meter Box with Lock 20 mm Water Meter Box with lock above 25 mm Water proofing Compound water tank 1 piece mould PVC Water tank PVC / fibre 1 piece mould Wax For Wood Polishing Welded Mesh 25 x 25 x 2.54 mm Welded Mesh 50 x 25 x 5 mm Welded Mesh 50 x 50 x 2.54 mm Welded Mesh 75 x 75 x 2.54 mm wheel stop tap 32 mm dia-Brass wheel stop tap 40 mm dia-Brass wheel stop tap 50 mm dia-Brass wheel stop tap 65 mm dia-Brass Wheel stop tap 80 mm dia-Brass Wheel Stop Tap of Brass 15 mm Wheel Stop Tap of Brass 20 mm Wheel Stop Tap of Brass 25 mm White Cement Wire Glass 6 mm thick Wood Primer Wooden Peg X.P.M. 12 mm x 18 gauge PVC Door frames and window frames BLR - 53 - 53 mm x 60 mm FLRLI - 40 mm x 57 mm DWUF 405 - 40 mm x 48 mm DWUF 412 - 38 mm x 32 mm
Unit
No. No. No. No. No. Kg. No. No. No. No. No. No. No. No. No. No. No. Kg. Litre Litre Kg. Sq.M. Sq.M. Sq.M. Sq.M. No. No. No. No. No. No. No. No. Tonne Sq.M. Litre No. Sq.M. Sq.M. Sq.M. Rmt Rmt
Final Rate
1767.00 554.00 2341.00 1567.00 1536.00 68.00 4.40 9646.00 1222.00 1819.00 2142.00 7899.00 8102.00 7108.00 397.00 467.00 530.00 63.00 12.00 17.00 249.00 353.00 368.00 261.00 239.00 514.00 634.00 805.00 599.00 714.00 207.00 257.00 348.00 23235.00 1192.00 154.00 13.00 121.00 212.00 533.00 384.00 270.00
233
Sr. No.
610 611
Description
DWUF 414 - 40 mm x 48 mm DWUF 415 - 50 mm x 60 mm PVC Doors/Windows Shutter Frames DWUF - 406 - 40 mm x 63.50mm For Vertical Central Part 'T' Sector DWUF - 302 - 24 mm x 59 mm For Frame Styles DWUF - 305 - 26 mm x 47 mm For Frame Styles DWUF - 306 - 33 mm x 47 mm For Frame Styles DWUF - 312 - 24 mm x 100 mm (Lock Rail) DWUF - 312 - 26 mm x 94 mm (Lock Rail) DWUF - 312 - 33 mm x 94 mm (Lock Rail) PVC - Infill Panels SPUF - 101 - 20 mm x 200 mm (Panels) SPUF - 105 - 12 mm x 150 mm (Panels) PVC - Beeding for Window Shutters GL 06 - 6mm x 19.50 mm - Beeding GL 19 - 19.00 mm x 19.50 mm - Beeding GL 31- 23 mm x 30 mm - Beeding AL 15 - 23 mm x 15 mm - Beeding EDFM - Rubber Gasket - Gasket
Unit
Rmt Rmt
Final Rate
409.00 61.00
312 613 614 615 616 617 618 619 620 621 622 623 624 625
Rmt Rmt Rmt Rmt Rmt Rmt Rmt Rft Rmt Rmt Rmt Kg. Rmt Rmt
292.00 185.00 194.00 269.00 327.00 355.00 381.00 100.00 251.00 66.00 99.00 95.00 147.00 82.00
HINCOL EMULSION
HINCOL Emulsion RS1 ( Tack Coat ) 626 627 628 Bulk HDPE Drums RC Drums Tonne Tonne Tonne 35849.00 41449.00 36843.00
234
RATE SCHEDULE
ANNEXTURE 'A'
MSSIDC LIMITED
RATE SHEDULE FOR SUPPLY OF PIPE ISI MARK ON THE RATE CONTRACT. 2012-2013
RATES IN RS. PER NO.
RATE PER PIPE F.O.R.Destination basis inclusive of 13% S.T. plus Trnover Tax & surcharge on sales tax for non Govt. Depaartment F.O.R.Destination basis inclusive of 13% S.T. plus Trnover Tax & surcharge on sales tax for non Govt. Depaartment F.O.R.Destination basis inclusive of 13% S.T. plus Trnover Tax & surcharge on sales tax for non Govt. Depaartment
DIA
NP-2 417.00 437.00 471.00 515.00 539.00 580.00 853.00 1193.00 1391.00 1513.00 1750.00 2212.00 2737.00 3884.00 4631.00 5566.00 6419.00 8528.00 9280.00 ----
NP-3 -------1579.00 --3440.00 4117.00 5222.00 6946.00 8988.00 10017.00 11237.00 14865.00 15353.00 ----
NP-4 -------1947.00 --3494.00 4427.00 5835.00 8064.00 10455.00 12072.00 15449.00 -19191.00 ----
2 MTR. LENGTH
80 100 150 200 225 250 300
2.5MTR.LENGTH
300 350 400 450 500 600 700 800 900 1000 1100 1200 1400 1600 1800 a) Collers
b) Half Round Pipes c) Non-standard Length Pipes d) Non-standard Size (diameter) pipe with Collar
Extra @ 10 % of the accepted rate of full length RCC Pipes of the corresponding dia of 2.5 mtr. Length and @ 10% of the accepted rate of full length RCC Pipes of corresponding dia of 2 Mtr. Length. At the half price of full round pipe of coresponding diameter + 10% Extra for NP-2, NP-3 and NP-4 class pipes At the rate of full round pipe of corresponding diameter + 10 % Extra Rate to be fixed by inter pollation without any extra cost.
235
ABBREVIATIONS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Square Kilometre Kilogram Metric tonne Number Runing metre Cubic centimeter Milimetre Centimeter Metre Kilometre Square Metre Cubic Metre Ministry of Road Transport & Highway Indian Standard Indian Road Congress Tools and Plants Galvanised Iron Cast Iron Reinforced Cement Concrete Plain Cement Concrete Pre-Stressed Concrete Ready Mixed Concrete Ground Level Rupees Diametre Minimum Maximum Hour That is For Example Water Bound Macadam Bituminous Macadam Lead in Kilometre Optimum Moisture content Hot mix, hot laid Building Works Bridge Works Cross Drainage Road Works 236 Sq.Km. Kg. M.T. No. R.M. Cu.Cm. mm. Cm. M. Km. Sq.M. Cu.M. MoRT&H IS IRC T&P GI CI RCC PCC PSC RMC GL Rs. Dia Min Max Hr i.e. e.g. W.B.M. BM L O.M.C. H.M.H.L. Bd. Br. Cd Rd.
ABBREVIATIONS
40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Taluka District Country Cut Teak Wood Centre to Centre Mild Steel High Yield Strength Deformed Bar Unplasticized Poly Venyl Chloride Poly Venly Chloride Asbestos Cement Cement Mortar Expanded Mesh Boiling Water Proof Boring Survey Works (Departmental Agency) Survey Works (Private Agency) Tal. Dist. C.C.T.W. c/c M.S. H.Y.S.D. UPVC P.V.C. A.C. C.M. XPM BWP B'NG Survey-D Survey-P
237
2) (I)
(II)
3) (I)
238
Description of Mix B.B. Masonry IInd sort in C.M. 1:5 B.B. Masonry IInd sort in C.M. 1:6 Half brick thick walls in C.M. 1:4 B.B. Masonry 1st class in C.M. 1:6 without pointing POINTING .. Store masonry in C.M. 1:3 IInd sort. B.B. Masonry in C.M. 1:3 iind class FLOORING Shahabad stone paving over 20mm. murum bedding including pointing 1:3 finishing pointing Indian patent stone flooring on 1.5 inch 1:2:4 C.C. hedding concrete finishing 50mm. thick Indian patent stone flooring on 1.5 inch 1:2:4 C.C. hedding concrete finishing 40mm. thick Cement tiles flooring in C.M. 1:4 bedding and slury. Cement tiles dado in C.M. 1:4 including backing coat 12 mm. thick. CEMENT REQUIRED FOR COLLERS JOINTS a b c d e f g h 250 mm. dia. NP-2 class 300 mm. dia. NP-2 class 450 mm. dia. NP-2 class 600 mm. dia. NP-2 class 750 mm. dia. NP-2 class 900 mm. dia. NP-2 class 1000 mm. dia. NP-2 class 1200 mm. dia. NP-2 class Ridge tile in C.M. 1:3 Stone ware pipes 1 inch dia. 6 inch dia. W.C. pan fixing Providing water poofing type treatment over old or new surface with applying slurry, providing brick bats and filling with cement morter 1:1 I.P.S. Over it.
6)
0.02 .0.025 0.030 0.050 0.070 0.10 0.11 0.15 0.30 0.15 1.000 0.520
R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. R.M. No. Sq.M.
7)
a b c d
8) Sr.No. 1 2 3 4 5
PLASTER THICKNESS PROPORTION CEMENT IN BAGS AS PER 1SQ.M. Thickness 6 mm 12 mm 20 mm 25 mm 25 mm sand faced .1:1 -0.286 0.425 0.496 -.1:2 -0.202 0.300 0.341 -.1:3 0.07 0.140 0.210 0.254 -.1:4 0.045 0.110 0.180 0.197 0.26 .1:5 -0.090 0.145 0.180 -.1:6 -0.0817 0.1207 0.1450 --
239