z
aS
=
2O
a5
Or
ce
an
=
Eee
Type SMA
Smart Analyzer 90
Sferoleyry)
felalelr ie
Geeee
eeelr ie
ejefayayry]
jeielele ieWARNING notices as used in this manual apply to hazards or unsafe practices which could result
inpersonal injury or death, oe
CAUTION notices apply to hazards or unsafe practices which could result in property damage.
Instruction Manuals
Do not install, maintain or operate this equipment without reading, understanding and following the
proper ABB Automation Inc., instructions and manuals, otherwise injury or damage may result.
Radio Frequency Interference
Most electronic equipment is influenced by radio frequency interference (RF). Caution should be
exercised with regard to the use of portable communications equipment in the area around such
equipment. Prudent practice dictates that signs should be posted in the vicinity of the equipment
cautioning against the use of portable communications equipment
Possible Process Upsets
Maintenance must be performed only by qualified personnel and.only after securing equipment
Controlled by this product. Adjusting or removing this product while itis in the system may upset the
process being controlled. Some process upsets may cause injury or damage.
NOTICE
The information contained in this document is subject to change without notice.
ABB, its affiliates, employees, and agents, and the authors of and contributors to this
publication specifically disclaim all liabilities and_warranties, express and implied
(including warranties Sere aa am: eee eerie eee 2), for the a
ofipletenéssyandiorte 4
glauar use andor frye perlomancaot any mater oe
iin whole or part with the user of/or in reliance upon sta
Selection of materials and/or equipment is at the sole risk
‘and/or equipment sele
information contained herei
of the User of this publication.
This document contains proprietary information of ABB and is issued in strict
confidence. Its use, or reproduction for use, for the reverse engineering , development.
or manufacture of hardware or software described herein is prohibited. No part of this
document may be photocopied or reproduced without the prior written consent of ABB.Preface
‘This publication is for the use of technical personnel responsible
for the installation, configuration, calibration, operation and
maintenance of the Bailey Type SMA Smart Analyzer 90 product.
It is important for safety and operating reasons that you read and
understand this manual. Until doing so, do not install or
complete any tasks or procedures related to configuration,
calibration or operation.
‘The software revision for the Type SMA Smart Analyzer 90
product at the time of this printing is: A10
1-E65-76A Advance Copy