Professional Documents
Culture Documents
Owners
Consultant
Main BOP
Contractor
BF INFRASTRUCTURE LTD.
NOIDA
UP
Prepared by
Checked by
KHAIRUL
SUHAN
Approved by
S. PAUL
Document No.
DESIGN CALCULATION OF RW
RESERVOIR.
BF-C001-120-DC-C001
REV.
RECORDS OF REVISION
Rev No.
Date
0
19.07.12
1
24.08.12
Revision Details
Released for Approval
Revised as per DCPLs comment dated
09.08.12
Revised By
Khairul
Approved By
S Paul
Description:
REV. NO.
Page
Ltd.
R-1
24.08.12
CONTENT
1. INTRODUCTION
2. SCOPE OF REPORT
3. REFFERENCES
4. DESIGN CONSTANTS
APPENDIX - I
APPENDIX II
APPENDIX III
BF-C001-120-DC-C001
Customer
IPCL(HALDIA)
Consultant:
DC Pvt.Ltd
Statutory Warning: All rights reserved. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited
3 of 28
Description:
REV. NO.
Page
Ltd.
R-1
24.08.12
1.INTRODUCTION:
This report presents the design calculation of Raw water Reservoir. There are boundary
wall on three sides and Raw water Pump House on one side of reservoir. Approximate
volume of the reservoir is 3,69,299.22 m3. A 250 mm thick brick wall is provided as a toe
wall on four side of reservoir except at inlet point and raw water pump house portion. At
inlet point, a 250 thick RCC wall of 2.9 m length is provided. side slope of the reservoir is
1:2 (V:H) and side slope at inlet portion is 1:3.51(V:H). A pair of RCC wall is provided at
junction of these two slope. A pair of staircase is provided to access the reservoir. Depth
of reservoir from FGL is 6.5m.side slope is lined with precast concrete tiles
(600mmX600mmX50mm). 65 mm thick PCC is provided at the bottom of the
reservoir.500 micron thick LDPE film is provided at the bottom of tiles and PCC.
3.REFERENCES:
Following codes and documents are used in design.
i)
ii)
SP 16
BF-C001-120-DC-C001
Customer
IPCL(HALDIA)
Consultant:
DC Pvt.Ltd
Statutory Warning: All rights reserved. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited
4 of 28
Description:
REV. NO.
Page
Ltd.
R-1
24.08.12
4. DESIGN CONSTANTS:
i)
= Fe 500
ii)
Grade of concrete
= M 30
iii)
Density of concrete
= 25 KN/m3
iv)
Density of soil
= 18 KN/m3
v)
=0.5
BF-C001-120-DC-C001
Customer
IPCL(HALDIA)
Consultant:
DC Pvt.Ltd
Statutory Warning: All rights reserved. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited
5 of 28
Description:
REV. NO.
Page
Ltd.
R-1
24.08.12
APPENDIX I
DESIGN OF RCC WALL
AND FOUNDATION.
BF-C001-120-DC-C001
Customer
IPCL(HALDIA)
Consultant:
DC Pvt.Ltd
Statutory Warning: All rights reserved. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited
6 of 28
7 of 28
8 of 28
9 of 28
10 of 28
11 of 28
12 of 28
13 of 28
Description:
REV. NO.
Page
Ltd.
R-1
24.08.12
APPENDIX II
RESERVOIR CAPACITY
CALCULATION
BF-C001-120-DC-C001
Customer
IPCL(HALDIA)
Consultant:
DC Pvt.Ltd
Statutory Warning: All rights reserved. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited
14 of 28
15 of 28
Description:
REV. NO.
Page
Ltd.
R-1
24.08.12
APPENDIX III
ANALYSIS OF
SLOPE STABILITY
BF-C001-120-DC-C001
Customer
IPCL(HALDIA)
Consultant:
DC Pvt.Ltd
Statutory Warning: All rights reserved. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited
16 of 28
Direction Angle
26
A =
25
B=
35
W =*A
Area (A)=bXh
L =b/cos
Radius Of Slip Circle =
12.804 m
m
1.6808
1.6808
1.6808
1.6808
1.6808
1.6808
1.6808
1.6808
F.O.S
=
=
Trial-1
Radius Of Slip Circle =
Kn/m
105.38
150.52
163.26
159.62
143.97
117.58
80.45
30.76
Degree
33
17.4
6.8
-1.9
-10
-17.7
-25.5
-33.8
sin
0.5447
0.2991
0.1185
-0.0332
-0.1737
-0.3041
-0.4306
-0.5563
T=Wsin N=Wcos
Cos
0.8387
0.9543
0.993
0.9995
0.9849
0.9527
0.9026
0.831
m
2.004
1.762
1.693
1.682
1.707
1.765
1.863
2.023
Kn/m
57.41
45.03
19.35
-5.3
-25.01
-35.76
-34.65
-17.12
Kn/m
88.39
143.65
162.12
159.55
141.8
112.02
72.62
25.57
14.499
3.95
905.72
Cos
0.5196
0.7478
0.8805
0.9589
0.9956
0.9953
0.9579
0.8789
m
4.697
3.264
2.772
2.545
2.452
2.452
2.548
2.777
Kn/m
100.63
164.48
153.42
91.89
27.33
-23.01
-46.03
-29.01
Kn/m
61.19
185.24
284.93
310.13
288.84
234.59
153.42
53.43
23.507
439.7
1571.77
12.819 m
m
2.44025
2.44025
2.44025
2.44025
2.44025
2.44025
2.44025
2.44025
F.O.S
Soil weight(W)
m2
5.79
8.27
8.97
8.77
7.91
6.46
4.42
1.69
(c*L+tan*N)/T
133.86 Hence Safe
Area(A)
m
3.441
4.918
5.336
5.217
4.703
3.84
2.626
1.005
m
2.649
5.576
7.283
7.28
6.53
5.306
3.605
1.368
=
=
Area(A)
Soil weight(W)
m2
6.47
13.61
17.78
17.77
15.94
12.95
8.8
3.34
Kn/m
117.76
247.71
323.6
323.42
290.11
235.69
160.16
60.79
Degree
58.7
41.6
28.3
16.5
5.4
-5.6
-16.7
-28.5
(c*L+tan*N)/T
2.07 Hence Safe
17 of 28
sin
0.8545
0.664
0.4741
0.2841
0.0942
-0.0976
-0.2874
-0.4772
T=Wsin N=Wcos
Trial-2
Radius Of Slip Circle =
13.339 m
m
2.10625
2.10625
2.10625
2.10625
2.10625
2.10625
2.10625
2.10625
F.O.S
=
=
Trial-3
Radius Of Slip Circle =
=
=
Area(A)
Soil weight(W)
m2
2.89
6.71
7.57
7.57
6.88
5.6
3.78
1.41
Kn/m
52.6
122.13
137.78
137.78
125.22
101.92
68.8
25.67
Degree
52.8
41
31
22
13.5
5.3
-2.8
-10.9
Area(A)
Soil weight(W)
m2
2.26
4.53
5.31
5.41
4.97
4.08
2.75
1.02
Kn/m
41.14
82.45
96.65
98.47
90.46
74.26
50.05
18.57
Degree
50.9
40.8
32
23.9
16.4
9.1
2
-5.1
m
1.244
2.5
2.928
2.983
2.742
2.247
1.517
0.562
=
=
Trial-5
Radius Of Slip Circle =
0.5765
0.7513
0.8652
0.9391
0.9827
0.9997
0.9915
0.9579
m
3.654
2.804
2.435
2.243
2.144
2.107
2.125
2.199
Kn/m
55.63
104.17
94.68
64.06
31.23
3.83
-12.03
-9.89
Kn/m
39.25
118.56
163.3
175.03
165.27
136.46
91.32
32.96
19.711
331.68
922.15
sin
Cos
0.6046
0.7548
0.8572
0.9272
0.9724
0.9958
0.9989
0.982
m
3.235
2.592
2.282
2.11
2.012
1.964
1.958
1.992
0.7966
0.6561
0.5151
0.3747
0.2335
0.0924
-0.0489
-0.1891
Kn/m
41.91
80.13
70.98
51.63
29.24
9.42
-3.37
-4.86
Kn/m
31.81
92.19
118.11
127.75
121.77
101.5
68.73
25.21
18.145
275.08
687.07
Cos
0.6307
0.757
0.8481
0.9143
0.9594
0.9875
0.9994
0.9961
m
2.873
2.394
2.137
1.982
1.889
1.835
1.814
1.82
Kn/m
31.93
53.89
51.23
39.91
25.55
11.75
1.75
-1.66
Kn/m
25.95
62.42
81.97
90.04
86.79
73.34
50.02
18.5
16.744
214.35
489.03
Cos
0.6535
0.7593
0.8387
0.8988
0.9433
0.974
0.9928
1
m
2.556
2.2
1.992
1.859
1.771
1.715
1.683
1.67
Kn/m
18.88
32.7
34.21
28.97
20.62
11.68
4.21
0.19
Kn/m
16.3
38.15
52.67
59.39
58.56
50.18
34.7
13.11
15.446
151.46
323.06
T=Wsin N=Wcos
sin
0.7761
0.6535
0.53
0.4052
0.2824
0.1582
0.0349
-0.0889
T=Wsin N=Wcos
(c*L+tan*N)/T
1.59 Hence Safe
15.751 m
F.O.S
0.8172
0.6601
0.5016
0.3437
0.1857
0.028
-0.1306
-0.2874
T=Wsin N=Wcos
Cos
14.663 m
m
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
Unit
1
2
3
4
5
6
7
8
sin
(c*L+tan*N)/T
1.62 Hence Safe
F.O.S
Degree
54.8
41.3
30.1
20.1
10.7
1.6
-7.5
-16.7
m
1.477
3.426
3.87
3.867
3.516
2.862
1.928
0.716
Trial-4
Radius Of Slip Circle =
Unit
1
2
3
4
5
6
7
8
Kn/m
68.07
157.8
188.74
186.37
168.17
136.5
92.1
34.4
13.886 m
m
1.95575
1.95575
1.95575
1.95575
1.95575
1.95575
1.95575
1.95575
F.O.S
Soil weight(W)
m2
3.74
8.67
10.37
10.24
9.24
7.5
5.06
1.89
(c*L+tan*N)/T
1.72 Hence Safe
Area(A)
m
1.772
4.116
4.923
4.857
4.384
3.559
2.398
0.894
m
0.818
1.647
2.061
2.172
2.037
1.689
1.149
0.428
=
=
Area(A)
Soil weight(W)
m2
1.37
2.76
3.45
3.63
3.41
2.83
1.92
0.72
Kn/m
24.94
50.24
62.79
66.07
62.07
51.51
34.95
13.11
Degree
49.2
40.6
33
26
19.4
13.1
6.9
0.8
sin
0.757
0.6508
0.5447
0.4384
0.3322
0.2267
0.1202
0.014
(c*L+tan*N)/T
1.66 Hence Safe
Minimum FOS obtained from this analysis is 1.59 which is more than 1. Hence the slope is stable.
18 of 28
T=Wsin N=Wcos
19 of 28
20 of 28
21 of 28
22 of 28
23 of 28
24 of 28
16.25 m
26.60
ABCD slope (H:V=2:1)has been is drawn . To locate the centre of rotation, extend the
bisector of line BC to cut the vertical line drawn from C at point O. O as the center and OC as radius,
Slip Circle has been drawn.
Now,
OC = R =
16.25 m
Area BECFB =
2/3* EF*BC
EF=
1.716 m
A =
16.63 m2
BC =
14.53 m
Therefore soil weight per meter width (W) =
A**1
i.e. W=
302.67 Kn
W acts through point G which has been taken as the middle of EF.
Now, X=lever arm=
6.884 m
=
Subtended angle =
53
Length of arc BEC =
R*
=
15.03 m
Disturbing moment =
W*x =
2083.59 Kn-m/m
Restraining moment=
(Length of arc BEC *Cohesion*Radius)
=
6105.94 Kn-m/m
Factor of safety
FOS
=
Restrainning Moment/Distrubing Moment
=
2.94
Hence Safe
25 of 28
26 of 28
16.25 m
26.60
ABCD slope (H:V=2:1)has been is drawn . To locate the centre of rotation, extend the
bisector of line BC to cut the vertical line drawn from C at point O. O as the center and OC as radius,
Slip Circle has been drawn.
Now,
OC = R =
16.25 m
Area BECFB =
2/3* EF*BC
EF=
1.716 m
2
BC =
14.53 m
A=
16.63 m
Therefore soil weight per meter width (W) =
A**1
i.e.W=
302.67 Kn
W acts through point G which has been taken as the middle of EF.
Now, X=lever arm=
6.884 m
=
Subtended angle =
53
Length of arc BEC =
R*
=
15.03 m
Disturbing moment =
W*x =
2083.59 Kn-m/m
Effect of Tension Crack
Maximum height of tension crack = Z =
=
(2*C)/
2.75
2
If the tension crack is filled with water then water thrust= 0.5 * w*Z0
Lever arm= y
Distrubing moment
Total distrubing moment
Now,1(Subtended angle COH)
=
=
=
=
=
37.82
11.583
438.1
2521.69
40
27 of 28
Kn
m
Kn-m/m
Kn-m/m
28 of 28