Professional Documents
Culture Documents
Epoxy Phenolic Tank Lining Test Type Cathodic Disbondment Test Method ASTM G8 - "Cathodic Disbonding of Pipeline Coatings" , Method A Specification Details 2 x 125m dft applied directly to Sa2 blasted steel. Typical Results Typically less than 7mm disbondment following 30 days exposure.
Condensation
Immersion
Abrasion
Average of 86mg weight loss per 1000 cycles using CS10 wheels and a 1Kg loading.
Adhesion
ISO 4624 - "Pull-off test for adhesion" using portable adhesion testers
Not less than 10MPa (1450psi) when using a PAT Model GM01 hydraulic adhesion tester on 5mm thick steel. An average of 0.8% elongation of the coating is achieved prior to fracture.
Elongation @ Break
08 October 2001
Page 1 of 2
All representation and statements concerning the product(s) in this report are accurate to the best of our knowledge. Any statements herein are not intended to be specific recommendations or warranties of any product, combination of products or fitness for purpose
Interline 850
Test Method ASTM D2794 "Resistance to the Effects of Rapid Deformation (Impact)"
Tensile Strength
08 October 2001
Page 2 of 2
All representation and statements concerning the product(s) in this report are accurate to the best of our knowledge. Any statements herein are not intended to be specific recommendations or warranties of any product, combination of products or fitness for purpose
Interline 850