You are on page 1of 1

11/03/13

IsuzuTruck Electronic Service Information System

Isuzu Engine On-Vehicle Service Oil Jet Replacement


1. Remove the oil pan (134) as outlined previously in this section. 2. Remove the bolts (207) and oil jet (208) (figure 120). Inspect the oil jet (208) passage for obstructions. 3. Install the oil jet (208) and bolt (207). Tighten Bolt (207) to 20 Nm (14 Ib ft) 4. Install the oil pan (134) as outlined previously in this section. Fill the oil pan with the proper quantity and grade of oil. Refer to MAINTENANCE AND LUBRICATION (SEC. 0B) in this manual.

Figure 120. Oil Jet Location Legend 203. Main Bearing Cap 207. Bolt 208. Oil Jet

www.kbtree.com/index_open_book.php?Client=Isuzu&BookID=629&IsuzuTruck=

1/1

You might also like