Professional Documents
Culture Documents
This unit gives learners an understanding of the key features of health and safety legislation and regulations and how these are applied in engineering to ensure safe working conditions. The unit could form a key component in many learning programmes since the content is highly applicable to many manufacturing, engineering and industrial situations. The unit includes the roles and responsibilities of persons involved in engineering, and the association between hazards and risks within the workplace and the environment. Delivery can be by PowerPoint presentation, whole-class teaching, group discussion and individual research.
On completion of this unit, learners will: LO1 Understand the key features of health and safety legislation and regulations LO2 Know how to identify and control hazards in the workplace LO3 Be able to carry out a risk assessment, identifying control measures LO4 Understand the methods used when reporting and recording accidents and incidents
Unit contents
The scheme of work for this unit links to the following resources to help you deliver Unit 1.
LO1 Lesson plan Activity sheet Stretch and support PowerPoint Video component LP AS1AS7 SS1SS7 PPT TVC6, Web9, 10, 11 VWS1 Web9, 10 VWS 1 AS8AS13 SS8SS10 LO2 LO3 LO4
All of these resources can be found on the accompanying @t Work CD-ROM, as well as an editable version of the scheme of work and answers to questions in the Student Book. Learning outcome can be covered by assessment activity 1.2 from the Student Book, and learning outcome 4 by assessment activity 1.3.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
Unit 21 Engineering secondary and finishing techniques and processes Unit 22 Fabrication processes and technology
Unit delivery
Delivery can be achieved through front-of-class teaching and group and individual working. Use of discussion after inspection of working environments would benefit the learning experience. It would be appropriate for the unit to be taught with some practical applications, for example the identification of the hazards and associated risks in a hands-on experience within an engineering workshop. This will have the effect of bringing the unit to life through use of the relevant tools and machinery used by practising engineers. The learner can be given support and guidance while carrying out a range of simple engineering tasks. The tasks will allow the learner to prepare the environment, prepare for the activity and complete the task within the requirements of the unit. Use of the internet to research health and safety legislation and regulations would be highly beneficial, as well as cost saving in resources. The scheme of work indicates the various areas of teaching.
Assessment
The assessment process The unit requires the completion of some assignments; three have been included as the number suggested in the outline learning plan. All assignments are assessed internally. The three included assignments are based on health and safety legislation, risk assessment and the reporting of accidents. Included are activity sheets to reinforce the learning and to help the learner to achieve these weekly activities. Those based on workplace environments give a real-life experience that will help when completing the assignments. Evidence for assessment Evidence of learners reaching the required criteria for each part of the unit content can be collected from case studies, assignments and activities. These should enable the learner to explore the application of legislation, regulations, hazards and associated risk in a typical engineering workplace. Three assignments and a number of activities are included in the unit and Teaching Resource Pack. These can also be adapted to suit the needs of a centre. Grading The grading criteria are shown in the unit specification under the heading Assessment and grading criteria. Careful reading of this and cross-checking with the assessment method in the Programme of suggested assignments will assist the grading of work produced by learners. The pass grade specifies the minimum acceptable level required by learners. This minimum acceptable level should demonstrate that the learner has an understanding of health, safety and welfare issues as applied to engineering processes and companies. They need to be able to explain the key features of legislation, the roles and responsibilities of key individuals, and show an understanding of the connection between hazards, associated risks and the possibility of accidents. Achievement of merit and distinction grades requires learners to provide answers that demonstrate additional depth and/or breadth of understanding of the topic area.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
The three assignments included in the unit and the Teaching Resource Pack evidence the required levels for pass, merit or distinction, so they can be used as a model for other assignments.
Useful resources
Information on health and safety legislation can be resourced from:
www.hse.gov.uk Spoodle: a specialised health and safety site Health and Safety at Work etc. Act 1974 (The Stationery Office) ISBN 978-0-10-543774-1 Management of Health and Safety at Work Regulations (HSE) ISBN 978-0-7176-2488-1 COSHH 2002 (HSE) ISBN 978-0-7176-2981-3 PUWER 1998 (HSE) ISBN 978-0-7176-6285-2 Personal Protective Equipment 1992 (HSE) ISBN 978-0-7176-6139-3 Manual Handling Regulations 1992 (HSE) ISBN 978-0-7176-2823-X Workplace Health, Safety and Welfare Regulations 1992 (HSE) ISBN 978-0-11-886333-9
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
Scheme of work
Unit 1 Health and safety in the engineering workplace
Broad aim: To give learners the opportunity to understand the application of health and safety in an engineering workplace. Tutor(s): SB = Student Book AS = Activity Sheet AT = Active teach Week 1 Outcome/topic LO1 Understand the key features of health and safety legislation and regulations LO1 Content Introduction to Health and Safety at Work Act 1974 PPT = Presentation R = Research NS = Non-supervised individual study time Learner activity Whole class teaching: introduction of unit, scheme of work, assessment methods, features of H&S legislation, internet research PPT01 and AS1 Health and Safety at Work etc. Act 1974 Introduction to Employment Act 2002, Regulatory Reform (Fire Safety) Order 2005, Employment Equality (Age) Regulations 2006 Introduction to Management of Health and Safety at Work Regulations 1999, PUWER 1998, COSHH 2002 Whole class teaching: introduction to the statutory acts and regulations. Use of internet PPT01 and AS2 Fire detection and fire precautions in work areas Whole class teaching: introduction to statutory regulations PPT01 and AS3 Checklist for differing types of work equipment in the area Whole class teaching: introduction to LOLER, MHOR, PPE Internet research AS4 Checklist for different types of PPE worn in a work area Hard copies of regulations Internet access AS3 Checklist for differing types of work equipment in the area Hard copies of regulations AS4 Checklist for different types of PPE worn in a work area Hard copies of acts and regulations AS2 Fire detection and fire precautions in work areas Independent enquirers, effective participators English, ICT Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English SS4 Types of PPE SS2 Fire detection and fire precautions Resources Hard copies of Health and Safety at Work Act AS1 Health and Safety at Work etc. Act 1974 Assessment and PLTS Independent enquirers English, ICT Stretch and support SS1 Health and safety law Academic year: Number of weeks: 30 Duration of session: 2 hours Guided learning hours: 60 Credits: 10
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
2.
LO1
LO1
Week 5
Outcome/topic LO1
Content Introduction to Confined Spaces Regulations, Electricity at Work Regulations, Control of Noise at Work Regulations
Learner activity Whole class teaching: introduction to Confined Space, Electricity at Work, Control of Noise Regulations Internet research AS5 Noise and sound, confined spaces and RIDDOR
Resources Copies of regulations AS5 Noise and sound, confined spaces and RIDDOR
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
LO1
Whole class teaching: introduction to RIDDOR AS5 Noise and sound, confined spaces and RIDDOR
Hard copies of regulations AS5 Noise and sound, confined spaces and RIDDOR Hard copies of regulations AS6 First-aid boxes and first aiders in a work area
Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English SS6 Firstaiders in the workplace
LO1
Introduction to Workplace (Health, Safety and Welfare) Regulations, First Aid Regulations Supply of Machinery Regulations 2008
Whole class teaching: introduction to the Welfare, First Aid and Machinery Supply Regulations Use of internet AS6 First-aid boxes and first aiders in a work area Whole class teaching: explanations of roles and responsibilities of employers and employees from criminal and civil law, analysis of health and safety policy Whole class teaching: explanation of the authority and the rights of HSE Inspectors Whole class teaching: explanation of roles and responsibilities of management, subcontractors, public, suppliers and customers from civil and criminal perspectives AS7 Roles and responsibilities from the Health and Safety at Work etc. Act 1974 and organisational policies SB Assessment activity 1.1, page 17
LO1
LO1
Roles and responsibilities of HSE, span of authority and right of inspection Roles and responsibilities of management, subcontractors, public, suppliers, customers and visitors
10
LO1
Hard copies of HASAWA and H & S policies AS7 Roles and responsibilities from the Health and Safety at Work etc. Act 1974 and organisational policies SB Assessment activity 1.1, page 17
6
Week 11 Outcome/topic LO2 Know how to identify and control hazards in the workplace LO2 Content Introduction to hazards and risk controls in the workplace Learner activity Whole class teaching: analysis of hazards and risk Resources Hard copy of H & S policies Assessment and PLTS Independent enquirers, effective participators ICT, English Within the workplace, methods to identify hazards, use of accident data, work methods Whole class teaching: observation/discussion, accident data and work methods Whole class teaching: discussion of hazards, confined spaces, work over water, heights AS8 Hazards from working over water and working at height 14 LO2 Working environment: workplace and harm, electrical hazards, chemicals and noise Whole class teaching: discussion on hazards, electrical, chemicals, noise AS9 Hazards electrical and chemical Whole class teaching: discussion on trivial and significant hazards, risks and control measures AS10 Trivial versus significant risk 16 LO2 Hazards and risks: electrical safety, injury, body injuries Whole class teaching: discussion on electrical hazards to body AS11 Hazard of contact with electricity and its effects 17 LO2 Hazards, risks and control measures: circuit overloads, safety devices, RCD, fuses Whole class teaching: discussion on electrical safety and control measures AS12 Electrical safety and control measures AS12 Electrical safety and control measures AS11 Hazard of contact with electricity and its effects AS10 Trivial versus significant risk AS9 Hazards electrical and chemical Accident data sheets Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English SS9 DC/AC circuits SS10 Changing a car wheel SS8 Use of ladders Stretch and support
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
12
13
LO2.
Working environment and harm: confined spaces, work over water and at heights
15
LO2
Hazards that become risks: trivial and significant risk, cause harm, control measures
Week 18
Outcome/topic LO2
Content Hazards, risks, mechanical safety, injuries, rotating machinery, sharp edges
Learner activity Whole class teaching: discussion on, hazards, human body, mechanical AS13 Machinery hazard controls Whole class teaching: discussion on mechanical safety
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
19
LO2
Hazards, risks, mechanical safety, control measures, guards, fail safe, sensors
20
LO3 Be able to carry out a risk assessment, identifying control measures LO3
Whole class teaching: discussion on risk assessment for machinery and work area
Working area
21
Risk assessments and control measures, procedures, substance, guarding, lifting, manual handling, inspections, PPE, training, working area Week 1 risk assessments five steps: hazards, persons, risk evaluation, record, review
22
LO3
23
LO3
Week 2 risk assessments five steps: hazards, persons, risk evaluation, record, review.
24
LO3
Carry out risk assessments, evaluate risk and adequacy of control measures
Whole class teaching: carry out some research activities to evaluate risk and adequacy of control measures
HSE INDG 163 Five Steps to risk assessment see http://www.hse.gov.uk/pubns/indg163.pdf Risk assessment sheets
8
Week 25 Outcome/topic LO3 Content Carry out risk assessments, evaluate risk and adequacy of control measures Learner activity Whole class teaching: carry out some research activities to evaluate risk and adequacy of control measures SB Assessment activity 1.2, page 30 Resources HSE INDG 163 Five Steps to risk assessment see http://www.hse.gov.uk/pubns/indg163.pdf Risk assessment sheets SB Assessment activity 1.2, page 30 Assessment and PLTS Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English P3, P4, P5, P6, M2, M3, D1 27 LO4 Understand the methods used when reporting and recording accidents and incidents LO4 Report and record accidents and incidents, keep records, competent persons, cost, consequences, trends causes, injury types, statistics Whole class teaching, discussion of reporting and recording methods, costs of accidents, human consequences and outcomes, trends Research major disasters Piper Alpha, Kings Cross, Kegworth Whole class teaching. discussion of RIDDOR, accident book, report and record methods for near misses and dangerous occurrences Float week SB Assessment activity 1.3, page 34 Copies of RIDDOR forms, accident book and procedural documents Independent enquirers, effective participators ICT, English Float week SB Assessment activity 1.3, page 34 Independent enquirers, effective participators ICT, English Independent enquirers, effective participators ICT, English Stretch and support
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
26
LO3
Risk assessments
28
Report and record accidents and incidents, reporting procedure, RIDDOR Accident book and procedures Float week
29 30
LO4 LO4
Lesson plan Unit 1 Health and safety in the engineering workplace week 1
Aims
To introduce learners to the unit To introduce learners to the Health and Safety at Work etc. Act 1974
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS = Activity sheet
All learners will be able to understand the background to the Health and Safety at Work Act All learners will be able to clearly describe the function of the Act. Most learners will be able to describe and apply knowledge of the Act. Some learners will be able to explain the legal requirements and purpose of the Act. Tutor activity Welcome to the session and aims of the lesson written on the board. Health and safety check ECM check Register Learner activity Learners settle and read aims Resources Whiteboard/Interactive whiteboard PC/Pen Individualised activity/differentiation Welcome PLTS Welcome to the session and aims of the lesson written on the board Health and Safety Check ECM Check Register Learners settle whole class teaching Group discussion on unit Introduction to key features of health and safety legislation SB Paper Whiteboard/interactive whiteboard Pen PPT Facilities. Week 1 Learners may be grouped deliberately balanced or according to stretch and support needs Team workers Effective participators Speaking and listening: make a range of contributions to discussions and make effective presentations in a wide range of contexts Functional Skills Learners settle and read aims
15 mins
10
Timing/ Content 30 mins Tutor activity Tutor gives introduction to Health and Safety at Work etc. Act 1974 by PowerPoint Learner activity Whole class teaching Learners listening and making notes Learners share ideas on ways to remember the Act Learners ask questions Resources SB Paper Whiteboard/interactive whiteboard Pen PPT. Session 1 slides 113 Hard copies of Health and Safety at Work etc. Act 1974 Internet access AS1 Worksheet Learners may be grouped deliberately to balance or according to stretch and support needs AS1 Learners may be grouped deliberately to balance or according to stretch and support needs Effective participators Team workers Access, search for and use ICT-based information and evaluate its fitness for purpose. Speaking and listening: make a range of contributions to discussions and make effective presentations in a wide range of contexts Individualised activity/differentiation Learners may be grouped deliberately to balance or according to stretch and support needs PLTS Effective participators Functional Skills Speaking and listening: make a range of contributions to discussions and make effective presentations in a wide range of contexts
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
30 mins
25 mins
Tutor goes through the PowerPoint slides that are provided on Health and Safety at Work Act etc. 1974
Learners listening and making notes Learners share ideas on ways to remember the Act Learners ask questions
10 mins Plenary
Review the aims of the lesson with learners and go through the Knowledge Check
SB
AS1
Look at each of the statements and tick in the box to show where the statement matches what you have learned about the Act. If you agree then tick the true box; if you disagree then tick the false box. If you are not sure then tick that box. Each correct True tick is worth 4, each correct False tick is worth 3 and Not sure ticks are worth minus 1.
Statement The Act became law on 1 October 1974. Lord Robens chaired the committee that produced the Act. The Act protects everybody at work. An employee is in control of an organisation. Employees supervise employers. A contractor is a person with specialist skills. Persons who comply with the law are breaking the law. A person breaking the law could face fines and imprisonment. Section 2 of the Act formalises the employers duties. Totals True False Not sure
Add up your score and see how close it comes to 33, the total points available for this activity.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
11
AS2
Investigate the work area and list types of fire precautions, fire detection and firefighting appliances or equipment. Note with a tick or cross in the last column whether the items have been maintained in any way. This could be evidenced by fingerprints on the item, or by reference to the site or facilities manager. Another example would be a date recorded on a sign on a fire extinguisher.
Fire precautions Fire doors Emergency lighting Safe condition signs Instructions fire safety Fire detection Smoke detectors Flame detectors Firefighting Extinguishers Fire hoses Fire blankets Sprinkler systems Inert gas systems Yes Position/place Maintained
Increase your communication functional skills by drawing a floor plan of the work area showing the position of the fire precautions, fire detection and firefighting appliances or equipment.
12
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS3
Investigate the work area for the types of work equipment listed below. Enter your findings while carrying out a visual inspection of the work equipment. Types of work equipment Hand tools
Machinery
Appliances
Powered tools
Assembly or components
Increase your communication functional skills by pasting photographs of the work equipment in this space.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
13
AS4
Investigate a work area of your choice for different types of personal protective equipment (PPE) being used; list them below. Choose four different types of PPE and describe in each case the part of the body they are protecting. Type of PPE Part of body Protection against Cost
To increase your ICT functional skills, search the internet for manufacturers or suppliers for each of your choice of PPE. Try to determine an approximate cost for each, and enter this in the last column.
14
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS5
Many people confuse noise and sound. Do you think that they are the same? Complete the statement: Noise is sound that persons do ______________________________
Sound is noise that persons do ______________________________ Write your definition of a confined space.
After researching RIDDOR on the internet, complete the table. Include four examples under each heading.
Reportable injuries Reportable dangerous occurrences Reportable diseases
In your opinion, are there more deaths from accidents at work per year than from work-related ill health? Could you provide approximate figures for each?
Accidents at work Work related ill-health
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
15
AS6
First aid is a legal requirement in all workplaces. Could you write a definition for first aid?
Investigate a typical workplace to determine the location of the first-aid boxes. Then try to find out how often they are checked for their contents. Enter your findings below.
16
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS7
Roles and responsibilities from the Health and Safety at Work etc. Act 1974 and organisational policies
Responsibilities
Describe in your own words the responsibilities for health and safety of the individuals shown.
Individual Employer
Employee
Manufacturer
Describe in your own words two powers and two enforcement actions of a Health and Safety Inspector.
Two powers 1
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
17
AS8
Imagine that you are the Chief Engineer on a project to build a bridge across a 150 m wide tidal river. Discuss with your team the hazards that your employees could experience when working above the water. Select two hazards. Think about the control measures that you would need to put in place to protect your employees. Use the table below to record your discussion.
Hazards to employees from working above water 1 Control measures to be implemented to protect the employees 1
Would there be different hazards and control measures for working at height?
Hazards from working at height
18
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS9
You have to give a short presentation to a group of employees on electrical hazards and chemical hazards. List three hazards from electricity that you would include.
Hazards to employees from electricity 1
Choose two chemicals used in a workplace of your choice. List the hazards from the chemicals. Describe the control measures for each chemical including the risk and safety phrases. (Useful tip: information can be obtained from the container, or research on the internet.)
Chemical 1
Chemical 2
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
19
AS10
Look at the table below. Now complete a similar table for a task of your choice. The task must be capable of being carried out in a simple and a complex manner.
Task type Simple task: Remove corroded nut Complex task
Loss of sight Temporary loss of hearing Vibration white finger High pressure air into eye High pressure air into cut on hand embolism could cause death Strains/sprains or long-term muscular injuries to back
Equipment used
Hazards
Outcomes
Complex task
20
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS11
By the use of research from your course notes, books and/or the internet, describe the effects on the human body of contact with 230 V AC electricity.
Describe, in a logical sequence, what you would do if a person that you were working with suffered an electric shock, had collapsed and was still in contact with the live conductor.
Logical sequence
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
21
AS12
Using 230 V from a mains supply for power tools on a civil engineering site
22
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
AS13
Referring back to the Student Book and your experience of carrying out an inspection of a workshop, determine which type of machine would incorporate the following types of control measures.
Push stick
You could use a digital camera to photograph each of the above to insert into this worksheet. Use the internet for research if you cannot access the information from a workshop.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
23
SS1
Support
Choose one of the following tasks. 1. 2. 3. Locate the HSE Poster Health and Safety for All in your centre and check your answers for AS1. Look on the Spoodle website (www.spoddle.org.uk) and check your answers in the Health and Safety at Work etc. Act 1974. Refer to Section 6 of the Health and Safety at Work etc. 1974 and write a short brief about who it places duties on.
Stretch
Investigate Section 7 of the Health and Safety at Work etc. 1974 (www.spoodle.org.uk will help you here). Using the words from Section 8 of the Health and Safety at Work etc. 1974, carry out research among people you know, perhaps members of your family or friends, to find out if they have ever had to pay for personal protective equipment at work. Write a short briefing note on your research.
SS2
Support
Choose one of the following activities: After obtaining permission from one of your tutors, complete a plan of an engineering workshop showing the fire detectors and fire precautions. Then get together with a partner or a tutor to discuss your plan. Research the internet for a fire risk assessment. You will find that the local Fire and Rescue service will be listed. An example from the Essex County Fire and Rescue service can be found at www.essex-fire.gov.uk. Read through the document and write a 250-word summary of the key information presented.
Stretch
Discuss the arrangements for evacuation of your school/college in an emergency with the facilities/site manager or a senior teacher or lecturer. Try to discover: whether there are any general problems in evacuating the buildings the time requirements to evacuate completely to the assembly points whether a roll call is carried out whether fire marshals are used to sweep the building to ensure complete clearance.
Draw up a table of the key points that emerged from your discussions.
24
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
Unit <Unit title here> Unit 1 Health and safety in X the engineering workplace
25
Stretch
Discuss with the technicians or tutors in the engineering workshop, or a similar area, the maintenance procedures for the machines and tools. Write a 200-word report on your findings.
SS4
Support
Types of PPE
Choose one of the following tasks. 1 Research at least three different types of PPE. Your research should cover a range of costs, applications of the PPE and the differences between them. A report should be written covering the benefits and limitations of each PPE type. A discussion could then follow with your tutor. 2 Write a short briefing on the types of fall arrestors that are available to steel-erecting companies. The findings of the briefing note are to be discussed with members of your group.
Stretch
Read through the following scenario. You work for an engineering company as an assistant in the Health and Safety Department. You have been asked by your manager to prepare a short briefing for all departmental managers. The briefing is on the importance of wearing eye protection while operating machinery. It has been noted during inspections of the workplace that a number of machine operators are ignoring their Safe Systems of Work and putting themselves at risk. The points to be covered in the briefing will be: different types of eye protection supply, storage and cleaning of eye protection legal requirements training, instruction and supervision lack of complaince and disciplinary action why operatives should protect their eyes types of injury.
Your manager then says that a presentation should be prepared which will cover all the points. You should put together the presentation deciding the best order in which to cover the points listed.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
25
Main content
Finishing up
Answering questions
Quality of slides
Eye contact
Clarity of speech
Annoying traits
26
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
Unit <Unit title here> Unit 1 Health and safety in X the engineering workplace
27
SS5
Support
Noise
Noise is unwanted sound. So what is sound? Is there a difference between noise and sound? Discuss this in a group of four, recording the important points of the discussion, making reference to differing types of sound/noise. After about 15 minutes, be ready to report the findings in a whole-group discussion.
Stretch
You have been asked by your tutor to explain the differences between temporary and permanent threshold hearing loss. Prepare a report of approximately 250 words explaining the differences between the two work-related hearing problems.
SS6
Support
First-aiders in a workplace
Arrange to carry out an interview with a first-aider in an area that you are familiar with. Ask the first-aider some prepared questions. For example: how they were trained in first aid when the training took place whether they have received any refresher training.
Write up your notes on the interview and then discuss the results with your group, or with your tutor.
Stretch
At your appraisal meeting you ask if you can become a first-aider. Your manager replies to your request in a positive manner. You are told to find out about local courses in first aid, which will involve research into local course details from providers such as St John Ambulance. Gather all the details you need and write a report on the courses, including the costs. Your report should include a justification of how the training would make you a good first-aider.
SS7
Support
An HSE inspector can enter a workplace at any reasonable time. Discuss with your group, or your tutor, what is meant by a reasonable time. Write a short report to a manager who is unsure of the meaning. The report should be based on your findings.
Stretch
The HSE inspector has certain powers when they enter a workplace. Choose four of these powers and write a short paragraph explaining, to someone who does not know the powers of the inspector, the reasoning behind their having these powers.
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
27
SS8
Support
Use of ladders
Before use, all ladders have to be inspected by a competent person. In a whole-group discussion, led by your tutor, determine what is meant by a competent person in this context. Make notes of the discussion so that you can write a brief definition for competence. Ensure that your tutor agrees with your definition.
Stretch
Using either the internet, or discussion with other competent persons, find a safe system of work (SSoW), or a procedure for the use of ladders. Using the research create your own SSoW for an electrician replacing electric bulbs to outside wallmounted security lamps. You may have to find the area where SSoWs are shown in the course book. Discuss with your tutor your completed SSoW for the activity.
SS9
Support
DC/AC circuits
You are to give a 15-minute toolbox talk (TBT) to a group of six new apprentices on the basic differences between DC and AC electrical supplies. Discuss in a group of four for about 15 minutes how this would be best carried out. Then write a list of the topics to be covered in the TBT; afterwards discuss your list of topics with your group and your tutor.
Stretch
From the support area you have previously decided to show a simple circuit diagram for DC and AC current systems as part of the TBT. Draw the two simple circuits showing the differences and all the relevant parts. Ask your tutor for conformation that your circuits are correct.
SS10
Support
You are required to complete a safe-system-of-work observation sheet for the task of changing a punctured tyre on a car wheel. You should create a table using MS Word so that the step-by-step procedure can be shown. The best method for this support activity is to observe someone carrying out the wheel-change task. It would also be good practice if a team of four of your group observed the task so that a discussion could take place to determine the correct process. The actual wheel-changing task must be carried out by a competent person in a safe manner. Discuss this with your tutor before starting the task. Your table could look like this. [See following page.]
28
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
Unit <Unit title here> Unit 1 Health and safety in X the engineering workplace
29
Safe System of Work observation sheet Activity: Changing a car wheel Step 1 2 3 4 5 6 Part activity carried out Open boot Remove spare wheel Remove jack and wheel nut wrench Carry on until completion Prepared by: Date:
Stretch
You have been requested to add two extra columns to your table showing the hazards and the trivial or significant risks. Complete the table below and discuss your findings and decisions with the whole group through a seminar session with your tutor. Your table could now look like this.
Safe System of Work observation sheet Activity: Changing a car wheel Step 1 2 3 4 5 6 Prepared by: Hazard No real hazard Manual handling/weight of wheel/difficult to grasp Sharp edges/trapping of fingers Date: Trivial/significant Trivial Significant Significant
Part activity being carried out Open boot Remove spare wheel Remove jack and wheel nut wrench Carry on until completion
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.
29
VWS1
Video worksheet
30
Pearson Education Ltd 2010. Copying permitted for purchasing institution only. This material is not copyright free.