Professional Documents
Culture Documents
pneumatic quiz
Search Quizzes
Create A Quiz
Take Quizzes Set 37 pneumatic quiz
Take Quizzes
pneumatic quiz
36 Questions I Created By marktired - 1338 days ago Pneumatic Quiz Pneumatic Quiz Pneumatic Quiz
Start
Embed
Remove Excerpt
Question Excerpt 1. The ________converts the compressed air energy into mechanical energy
and motion. The pneumatic drive elements can move in a linear, reciprocating or rotating motion. A.exhaust port. B.annular area C.drive elements D.inlet port
3. The cylinder has two ports - a pressure inlet port and an exhaust port. The
______ (shaped like or forming a ring) of the cylinder is connected to the atmosphere.
10/1/13
pneumatic quiz
lift, feed, eject, press or push objects or to clamp parts. Practically, they are suitable for oil- free operation.
why the cylinder can move loads or perform mechanical work in a forward motion only and that the effective force is reduced by the __________. A.exhaust port B.annular area C.inlet port D.return spring
8. Note that the length of stroke is the actual working movement. The ______
enables the cylinder to lift heavy loads. They can also be equipped with an anti-rotation anchor, external guidance and a magnetic ring for triggering non- contact signaling elements. A.longer stroke B.shorter stroke C.middle stroke D.left stroke
9. Note that a _______ is a metal
cylinder that slides up and down inside a tubular housing, receiving pressure from or exerting pressure on a fluid.
10. The working speed of piston is in the range of ____________.
A.10 to 100 mm/s B.20 to 200 mm/s C.50 to 500 mm/s D.40 to 400 mm/s
11. Cylinder forces are about __________.
chamber with flexible sides that can be expanded to draw air in and compressed to force the air out.
www.proprofs.com/quiz-school/story.php?title=pneumatic-quiz
2/8
10/1/13
pneumatic quiz
piston of the single-acting cylinder is pressed by the spring to the ______. A.cylinder center B.cylinder down C.cylinder bottom D.cylinder upper
15. An alternative construction is a __________ with a spring in the piston
area causing the piston to extend. Such pistons are used in the automotive industry and these are mounted in the air brakes for vehicles and trains.
A.single-acting cylinder, with return spring B.single-acting cylinder, without return spring C.double-acting cylinder, spring extend D.single-acting cylinder, spring extend
16. Another special form of single-acting cylinders is ___________ in which
the pistons return stroke is caused by external forces or by its own weight.
www.proprofs.com/quiz-school/story.php?title=pneumatic-quiz
3/8
10/1/13
pneumatic quiz
A.single-acting cylinder, spring extend B.single-acting cylinder, without return spring C.double-acting cylinder, spring extend D.single-acting cylinder, with return spring
17. _________ are used when short strokes are required together with high
in the form of of force and linear movement in both directions. A.single-acting cylinders B.double-acting cylinders C.double-acting cylinder, spring extend D.double-acting cylinder, spring extend
19. Diaphragm or bellows-type cylinders can have diameters of up to ____
mm.
control valves.
10/1/13
pneumatic quiz
The working speed is in the range of 30 to200 mm/s. Cylinder forces are about 40 kN. A.Short-stroke Cylinders B.Piston cylinders
23. The ________ (strong sudden movements) cylinder piston movements
depend upon the cylinder diameter and the load fluctuations which the cylinder is subjected to.
24. ____________are connected into the Line as close as possible to the
element concerned. Fixed-set throttles and throttle valves are fitted to special-purpose sub- assemblies like pneumatic timers.
__________to reduce the cross-sectional area enables the compressedair flow rate to be adjusted, and with it the working speed.
www.proprofs.com/quiz-school/story.php?title=pneumatic-quiz
5/8
10/1/13
pneumatic quiz
10/1/13
pneumatic quiz
between the input and the output of the valve. A.regulating throttle valve B.fixed throttle valve C.adjustable throttle valve D.PNEUMATIC CYLINDERS
27. A ____________ allows air to flow in one direction and seals it off in the
opposite direction.
single-acting cylinder. A.3/2 directional control valve (DCV) B.3/2 directional control cylinder (DCV) C.5/2 directional control valve (DCV) D.5/2 directional control cylinder (DCV)
29. When this method is employed, the piston of the double-acting cylinder Is
virtually clamped between two air cushions. Full pressure is applied at the inlet-air side and the exhaust air is throttled. This leads to uniform cylinder movement. INLET-AIR THROTTLING A. USING METER-IN CIRCUIT B.EXHAUST-AIR THRO1TLING USING METER-OUT CIRCUIT C.MANUALLY OPERATED DIRECTIONAL CONTROL VALVES
30. The ____________ controls or limits the air flow by offering an adjustable
restriction. The flow cross-sectional area in the throttle valve is changed by turning the throttling screw to adjust the position of the flow body. A.Cylinder Bottom B.Adjustable throttle valve C.Fixed-set throttles
www.proprofs.com/quiz-school/story.php?title=pneumatic-quiz 7/8
10/1/13
pneumatic quiz
D.Return Spring
31. Basically, the __________ functions the same as the 4/2 version. The only
difference being that due to its design as a spool valve, the 5/2 has an additional exhaust port (5). A.1/2 directional control valve B.3/2 directional control valve C.4/2 directional control valve D.5/2 directional control valve
32. The principles of operation of the pneumatically operated ___________ is
dependent upon the movement of the spool inside the valve. A.5/2 directional control valve B.3/2 directional control valve C.4/2 directional control valve
33. The _______, operated by pneumatic Impulse, is applied in various
practical solutions such as pushing off details, applying tools for performing operations, opening/closing doors and windows, stretch/bend robot/manipulator arms. A.4/2 directional control valve B.3/2 directional control valve C.5/2 directional control valve
34. Another version of the one-way flow-control valve is the _________which
can be screwed directly into the cylinder ports. A.screw-outside version B.screw-exit version C.screw-insert version
35. The ______________, manually operated, is used to control the direction
of the air flow in a single line of a pneumatic system. They are used to provide input control of power signals given by an operator or by moving mechanisms of the system. A.3/2 directional control valve (DCV) B.3/2 directional control cylinder (DCV) C.5/2 directional control valve (DCV) D.5/2 directional control cylinder (DCV)
36. The position of the valve spool is retained until a _________ is applied to
any of the control polls. A.short pneumatic control signal B.long pneumatic control signal
Back to top
Related Topics
pneumatic quiz
Related Quizzes
Review # 1: Electric, pneumatic and hydraulic tools and Power Drills
Powered by ProProfs
www.proprofs.com/quiz-school/story.php?title=pneumatic-quiz
8/8