Professional Documents
Culture Documents
Abstract
Concerning the fact that the planet gear can be utilized in practice due to the restriction on its outer diameter size and service life,
through the investigation of sliding bearing film force law, on the internal surface of which the film force is posed, instead of
cylindrical roller bearing in this paper, and with the aid of ANSYS finite element analysis software, the stress and strain
distribution of sliding bearing are evaluated, resulting in the conclusion that sliding bearing can fulfill the task in terms of design.
Keywords: Planetary Reducer; Journal Bearing of Planet Gear; Finite Element Analysis; Stresses and Strains
116028
ANSYS
60KN
[1-3]
1.1
dmm
Dmm
Bmm
*51075049
- 19 www.ivypub.org/MED
NU219E
95
1
170
32
19
8 Solid45
3 [4]
7 1
1.2
3 Von Mises mm
Von Mises
243.89MPa 0.00126mm
2.1
[5-8] Reynolds
h3 p h3 p
h
6v
x z z
x
- 20 www.ivypub.org/MED
(1)
Holland 1
1
pv , 1.59cos
1 1 2.2
2
1 0.6cos
(2)
=2z/l 2 4
2.2
FZ1365 [9] 2
Hypermesh
Z
2
/mm
95
/mm
32
/M Pa
200 000
0.28
kg/m
8000
10
2.3
6
[10-11]
- 21 www.ivypub.org/MED
7 Von Mises mm
[p][v][pv]
M Pa
M Pa
243.9
1175
45.75
250
ANSYS
REFERENCES
[1]
Yang Qin. Probe into the Design of Transmission Planet Gear Bearing of NGW Planet Gear in Coal Mine Machinery[J].SCITECH information development & economy, 2007,17 (21): 181-182
- 22 www.ivypub.org/MED
[2]
Zhou Xincong, Liang Wang, Feng Hao. Powder Metallurgy Oil Bearing Technology[M]. SciencePress, 2010
[3]
Yang Jin-fu, Yang Kun, Yu Da-ren, et al. Study on Nonlinear Oil-film Force of Journal Bearing[J]. Journal of Vibration
Engineering, 2005, 18 (3): 118123.
[4]
Wang Jun-ling, Zheng Xiang, Wu Huan. The Finite Element Analysis of Cylindrical Roller Bearings[J]. Journal of Yangzhou
University, 2012, 15 (2): 43-46
[5]
Ma M.T., Taylor C.M.. An Experimental Investigation of the Thermal Effects in Circular and Plain Journal Bearings[J].Tribology
International, 1996, 29 (l):19-26
[6]
Zhang Zhi-ming. Theory of fluid Power Lubricate in Journal Bearing[M]. Beijing: Higher Education Press, 1986
[7]
Ma G.J., Wu C.W., Zhou P. Wall Slip and Hydrodynamics of Two-dimensional Journal Bearing[J]. 2007, 40 (7): 10561066
[8]
Wang Ning. Based on the MATLAB Numerical Calculation of Sliding Bearing Pressure Distribution[D]. Dalian University of
Technology, 2006
[9]
Xu Jun. Research on Design and Strength Analysis of Marine Diesel Engine Bearing[D]. Chongqing University, 2010
[10] Khonsari M.M., Wang S.H., On the Fluid-Solid Interaction in Reference to Thermoelastohydrodynamic Analysis of Journal
Bearings[J]. ASME Journal of Tribology, 1991, 113(4):398-404
[11] Zhong Wei, Cui Min, Tong Shui-guang. Numerical simulation of deformation and stress in sliding bearing considering oil film
lubrication[J]. Journal of Zhejiang University. 2012, 46 (7):1228-1232
[12] Bu Yan. Practical Bearing Technology Manual[M]. Beijing: China Machine Press, 2004
1957-
1987-
2010
1989 3
Email: gzl@djtu.edu.cn
Email: gustav5233@yeah.net
1967-
1992
2004 2005
11
Email: hwdong@djtu.edu.cn
- 23 www.ivypub.org/MED