Professional Documents
Culture Documents
The Jaw Type Couplings from Vescor are offered in the industrys largest
variety of stock bore/keyway combinations. These couplings require no
lubrication and provide highly reliable service for light, medium, and
heavy duty electrical motor and internal combustion power transmission
applications. Other features and benefits include:
Fail safe-will still perform if elastomer fails.
No metal to metal contact
Resistant to oil, dirt, sand, moisture and grease.
More than 850,000 combinations of bore sizes.
Most types available from stock in 24 hours
L Type
This coupling offers standard shaft-to-shaft connection for general industrial duty applications. Standard L type coupling hub materials are either
sintered iron (L035-L150) or cast iron (L190-L276).
AL Coupling
AL Type
The aluminum construction means this coupling is light weight with low
overhung load and low inertia. The AL type also offers excellent resistance to atmospheric conditions, so it is perfect for corrosive environment
applications.
C Type
These couplings provide standard shaft-to-shaft connection for medium
range applications. The standard coupling hub is made of cast iron.
L Coupling
C Coupling
Elastomers in Compression
Vescor offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs
are used in the L and AL models (referred to as spiders) and multiple part load cushions are used in the C model couplings. The load
cushions are in sets of 8 to 14 pieces depending on coupling size.
Solid Center Spider
The solid center design is the most commonly used in general power
transmissions applications when the shafts of the driver and driven can be
kept separate by a standard gap.
Open Center Spider
The open center spider design allows the shafts of the driver and driven
to be positioned within a short distance. Open center spiders offer shaft
positioning flexibility but have lower maximum RPM capability (1750
RPM max for NBR, 3600 RPM max for Urethane/Hytrel).
Cushions
The cushion design is available exclusively for the C Type jaw couplings.
The load cushions are held in place radially by a steel collar which is
attached to one of the hubs. This design allows for easy installation and
removal of the load cushions. The cushion design have the same engineering purpose as the spider design but is more effective in the heavy
duty applications that Type C couplings address.
Snap Wrap Flexible Spider
The snap wrap flexible spider design allows line spider section of the
coupling to be easily installed or removed without disturbing the coupling hub. This design also allows for close shaft separations all the way
up to hubs maximum bore, which is not possible with open center spiders. Maximum RPM is 1750 with retaining ring.
167
Spider Materials
SOX (NBR) Rubber
Nitrile Butadiene (Buna-N) Rubber, a highly flexible insert material that
is oil resistant, is our standard elastomer. It resembles natural rubber in
resilience and elasticity and operates effectively in temperature ranges of
-40 to +212F (-40 to +100C). (Also applies to SXB Cushions.)
Urethane
Urethane has 1.5 times greater torque capacity then NBR and offers good
resistance to oil and chemicals. However, this material provides less
dampening effect and operates at at temperature range of -30 to +160F
(-34 to +71C)
Hytrel
Hytrel is a flexible elastomer designed for high torque and high temperature operations. Hytrel can operate in temperatures of -60 to +250F
(-51 to +121C) and has an excellent resistance to oil and chemicals. It
is best used in continuous load applications rather than cycle or on/off service.
Bronze
Bronze is a rigid, porous, oil-impregnated metal insert exclusively for low
speed (max. 250 rpm) applications requiring high torque capabilities.
Bronze performance is not affected by water, oil, dirt, or extreme temperaturesoperates in temperatures of -40 to +450F (-40 to +232C).
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
VC
Selection Example
The selection process for determining the proper jaw coupling size and
elastomer requires using the charts shown on the following pages. There
are three components to be selected, two hubs and one elastomer. When the
shaft size of the driver and driven of the application are of the same diameter, the hubs selected will be the same. When shaft diameters differ, hubs
selected will differ accordingly.
Step 7: Using the item Number Selection Charts, find the appropriate Bore
and keyway sizes required and locate the item number.
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
168
VC
Agitators
Band Resaw (lumber)
Barge Haul Puller
Beaters
Blowers
Centrifugal
Lobe, Vane
Bottling Machinery
Brew Kettles (distilling)
Can Filling Machinery
Car Dumpers
Car Pullers
Card Machine
Chiller (oil)
Compressors
Centrifugal
Screw, Lobe
Reciprocating
Conveyors, Uniformly Fed
Assembly, Belt, Screw
Bucket, Sawdust
Live Roll, Shaker, Reciprocating
Conveyors, Not Uniformly Fed
Assembly, Belt, Oven, Screw
Reciprocating
Shaker
Cookers-Brewing, Distilling
Food
Cranes & Hoist
Crushers-Cane (Sugar, Stone, or Ore)
Dredges
Cable Reels
Conveyors, Pumps
Maneuvering Winches
Cutter Head Drives
Dynamometer
Evaporators
Fans
Centrifugal
Cooling Towers
Forced Draft, Propeller
Induced Draft w/damper control
Induced draft w/o damper control
Feeders
Belt, Screw
Reciprocating
Filter, press-oil
Generators
Not Welding
Welding
Hoist
Hammermills
Kilns
Laundry Washers-Reversing
Lumber Machinery
Barkers, Edger Feeder, Live Roll
Planer, Slab Conveyor
1Cyl.
2Cyl.
1.00
1.50
2.00
1.50
1.25
1.75
2.25
1.75
1.00
1.50
2.00
1.50
1.7
2.2
2.7
2.2
1.3
1.8
2.3
1.8
1.00
1.25
1.25
1.25
1.00
2.50
1.50
1.75
1.50
1.25
1.50
1.50
1.50
1.25
2.75
1.75
2.00
2.00
1.00
1.25
1.25
1.25
1.00
2.50
1.50
1.75
1.25
1.7
2.0
2.0
2.0
1.7
3.2
2.2
2.5
2.0
1.3
1.6
1.6
1.6
1.3
2.8
1.8
2.0
2.0
1.00
1.25
1.25
1.50
1.00
1.25
See Note
1.7
2.0
1.3
1.6
1.00
1.25
3.00
1.25
1.50
3.25
1.00
1.25
3.00
1.7
2.0
3.7
1.3
1.6
3.3
1.20
2.50
3.00
1.45
2.75
3.25
1.20
2.50
3.00
1.9
3.2
3.7
1.5
2.8
3.3
1.25
2.00
3.00
1.50
2.25
3.25
1.25
2.00
3.00
2.0
2.7
3.7
1.6
2.3
3.3
2.00
2.25
2.00
2.7
2.3
1.50
2.50
1.50
1.00
1.75
2.75
1.75
1.25
1.50
2.50
1.50
1.00
2.2
3.2
2.2
1.7
1.8
2.8
1.8
1.3
1.00
2.00
1.50
2.00
1.25
1.25
2.25
1.75
2.25
1.50
1.00
2.00
1.50
2.00
1.25
1.7
2.7
2.2
2.7
2.0
1.3
2.3
1.8
2.3
1.6
1.00
2.50
1.50
1.25
2.75
1.75
1.00
2.50
1.50
1.7
3.2
2.2
1.3
2.8
1.8
1.00
2.00
1.50
2.00
1.50
2.00
1.25
2.25
1.75
2.25
1.75
2.25
1.00
2.00
1.50
2.00
1.50
2.00
1.7
2.7
2.2
2.7
2.2
2.7
1.3
2.3
1.8
2.3
1.8
2.3
2.00
2.00
2.25
2.25
2.00
2.00
2.7
2.7
2.3
2.3
Machine Tools
Punch Press-Gear Driven,
Plate Planer
Tapping Machinery, Bending Roll
Main Drive
Auxiliary Drives
Metal Forming Machines
Draw Bench-carriage & Main Drive
Extruder, Forming Machine,
Wire Drawing
Table Conveyors
Wire Winding, Coilers, Slitters
Mills, Rotary Type
Ball, Kilns, Pebble, Rolling, Tube
Cement Kilns, Dryers, Coolers
Tumbling
Mixers
Concrete, continuous
Muller
Paper Mills
Agitator (mixers), Reel, Winder
Winder
Barker (mechanical), Log Haul,
Chipper
Barking Drum (spur gear)
Beater, Pulper, Jordans, Dresses
Calenders, Dryers, Washers,
Thickener
Converting Machines, Conveyors
Printing Presses
Pug Mill
Pumps
Centrifugal
Gear, Rotary, Vane
Reciprocating;
1-Cyl. Single or Double Acting
2-Cyl. Single Acting
2-Cyl. Double Acting
3 or more Cyl.
Rubber Machinery
Mixers
Rubber Calender
Screens
Air washing, Water
Rotary-stone or gravel, Dewatering
Vibrating
Grizzly
Shredders
Steering Gears
Stokers
Suction Roll (paper)
Textile Machinery,
Dryers, Dyeing Machinery, Mangle
Loom Spinner, Tenter Frames
Tumbling Barrels
Windlass
Woodworking Machine
Reciprocating
Engines
Electric motor w/
High Torque
Electric Motor w/
Standard Torque
Service Factors
Reciprocating
Engines
Electric motor w/
High Torque
Electric Motor w/
Standard Torque
Service Factors
1Cyl.
2Cyl.
2.00
2.00
1.50
1.00
2.25
2.25
1.75
1.25
2.00
2.00
1.50
1.00
2.7
2.7
2.2
1.7
2.3
2.3
1.8
1.3
2.00
2.25
2.00
2.7
2.3
2.00
2.50
1.50
2.25
2.75
1.75
2.00
2.50
1.50
2.7
3.2
2.2
2.3
2.8
1.8
2.00
2.00
1.50
2.25
2.25
1.75
2.00
2.00
1.50
2.7
2.7
2.2
2.3
2.3
1.8
1.75
1.50
2.00
1.75
1.75
1.50
2.5
2.2
2.0
1.8
1.20
1.20
1.45
1.45
1.20
1.20
1.9
1.9
1.5
1.5
2.00
2.50
2.00
2.25
2.75
2.25
2.00
2.50
2.00
2.7
3.2
2.7
2.3
2.8
2.3
1.50
1.20
1.50
1.75
1.75
1.45
1.75
2.00
1.50
1.20
1.50
1.75
2.2
1.9
1.7
2.0
1.8
1.5
1.3
1.6
1.00
1.25
1.25
1.50
1.00
1.25
1.7
2.0
1.3
1.6
2.00
2.00
1.75
1.50
2.25
2.25
2.00
1.75
2.00
2.00
1.75
1.50
2.7
2.7
2.5
2.2
2.3
2.3
2.0
1.8
2.50
2.00
2.75
2.25
2.50
2.00
3.2
2.7
2.8
2.3
1.00
1.50
2.50
2.00
1.50
1.00
1.00
1.50
1.25
1.75
2.75
2.25
1.75
1.25
1.25
1.75
1.00
1.50
2.50
2.00
1.50
1.00
1.00
1.50
1.7
2.2
3.2
2.7
2.2
1.7
1.7
2.2
1.3
1.8
2.8
2.3
1.8
1.3
1.3
1.8
1.20
1.50
1.75
2.00
1.00
1.45
1.75
2.00
2.25
1.25
1.20
1.50
1.75
2.00
1.00
2.0
2.2
2.5
2.7
1.7
1.6
1.8
2.0
2.3
1.3
Note: Applications involving reciprocating engines and reciprocating driven devices are subject to critical rotational speeds which may damage the coupling and/or connected equipment.
Contact engineering with specific requirements.
169
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
VC
Misalignment
Angular Parallel
Shore1
Dampening
Chemical 2
Range
Degree
Inch
Hardness
Capacity
Resistance
Color
-40 to +212F
-40 to +100C
.015
80A
High
Good
Black
-30 to +160F
-34 to +71C
.015
55D
L050-L095
40D
L099-L225
Low
Very Good
Blue
-60 to +250F
-51 to +121C
1/2
.015
55D
Low
Excellent
Tan
-40 to +450F
-40 to +232C
1/2
.010
None
Excellent
Bronze
Characteristics
Note: NBR standard shore hardness is 80A5A-except L035=60A. Other softer or harder designs are available in NBR material, consult engineering
Chart 3
Maximum
Bore
Size
inch
mm
Urethane Torque
in-lbs
Nm
in-lbs
Nm
in-lbs
Hytrel Torque
Bronze Torque
Nm
in-lbs
Nm
L035
.375
3.5
0.4
N/A
N/A
N/A
N/A
N/A
L/AL050
.625
16
26.3
3.0
39
4.5
50
5.6
50
N/A
5.6
L/AL070
.750
19
43.2
4.9
65
7.3
114
12.9
114
12.9
L/AL075
.875
22
90.0
10.2
135
15.3
227
25.6
227
25.6
L/AL090
1.000
25
144.0
16.3
216
24.4
401
45.3
401
45.3
L/AL095
1.125
28
194.0
21.9
291
32.9
561
63.4
561
63.4
L/AL099
1.188
30
318.0
35.9
477
53.9
792
89.5
792
89.5
L/AL100
1.375
35
417.0
47.1
626
70.7
1134
128.0
1134
128.0
L/AL110
1.625
42
792.0
89.5
1188
134.0
2268
256.0
2268
256.0
L150
1.875
48
1240.0
140.0
1660
210.0
3708
419.0
3706
419.0
AL150
1.875
48
1450.0
163.8
N/A
N/A
N/A
N/A
N/A
N/A
L190
2.125
55
1726.0
195.0
2592
293.0
4680
529.0
4680
529.0
L225
2.625
65
2340.0
264.0
3510
397.0
6228
704.0
6228
704.0
L276
2.875
73
4716.0
533.0
N/A
N/A
N/A
N/A
N/A
N/A
C226
2.500
64
2988.0
338.0
N/A
N/A
5940
671.0
5940
671.0
C276
2.875
73
4716.0
533.0
N/A
N/A
9432
1066.0
N/A
N/A
C280
3.000
76
7560.0
854.0
N/A
N/A
13866
1567.0
N/A
N/A
C285
4.000
102
9182.0
1038.0
N/A
N/A
16680
1882.0
N/A
N/A
C295
3.500
89
11340.0
1281.0
N/A
N/A
22680
2563.0
22680
2563.0
C2955
4.000
102
18900.0
2136.0
N/A
N/A
37800
4271.0
37800
4271.0
Note: Bronze has a maximum RPM capability of 250RPM. N/A indicates not available
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
170
VC
L Type Coupling
The L Type sizes range from L035 to L276.
Ordering requires selecting part numbers for two
standard L hubs and one standard open or solid
center elastomer (spider).
L Type Coupling
Type
SOX (NBR) (solid)
SOX (NBR) (open center)
L035
L050
L070
L075
L090
L095
L099
L100
L110
L150
L190
L225
L276
10118
10194
10406
10393
10621
10620
11070
10968
11070
10968
11494
11492
11494
11492
11724
11711
12001
37880
12274
37881
12409
12406
12612
10395
10411
10626
11075
11075
11499
11499
11729
12006
12280
12417
25308
25309
25310
25310
11486
11486
11717
38097
11993
38098
12285
38099
12400
12401
10409
10624
11073
11073
11497
11497
11727
12004
12274
34517
24669
11071
24669
11071
24670
11495
24670
11495
24671
11725
24672
12002
24673
12275
41170
41170
41171
Urethane (solid)
Urethane (open center)
37786
Hytrel (solid)
Hytrel (open center)
25307
10498
28284
25767
26093
Pitch
SAE
A
Spline
Diameters
Major
Minor
Shaft
Maj. Dia.
16/32
11
16/32
13
16/32
.901
13
8/16
D, E
1.798
14
12/24
1.289
1.087
1.250
15
16/32
BB
1.026
.877
1.000
21
16/32
1.401
1.250
23
16/32
1.526
1.375
27
16/32
15
8/16
L090
L095
L099
L100
L110
L150
L190
L225
L276
.651
.509
.625
38568
37900
38571
37904
.776
.631
.750
38569
37901
38572
37905
37909
37917
37925
.754
.875
38570
37902
38573
37906
37910
37918
37926
37935
1.506
1.750
37915
37923
37931
37940
37912
37920
37928
37937
38577
37911
37919
37927
37936
38578
1.375
37913
37921
37929
37938
1.500
37914
37922
37930
37939
37916
37924
1.776
1.625
1.750
2.048
1.753
2.000
38574
37907
37932
37941
37933
37942
38576
38579
Note: 1. All pressure angles on above splines = 30. Class 5 fit is standard, unless otherwise specified.
2. All stock spline bore hubs are supplied standard with standard Centaloc Spline Locking Feature. See page 142.
171
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
VC
Keyway
No KW
No KW
No KW
1
/8 x1/16
No KW
No KW
3
/32 x 3/64
1
/8 x1/16
No KW
3
/32 x 3/64
1
/8 x 1/16
No KW
1
/8 x 1/16
No KW
1
/8 x 1/16
No KW
5
/32 x 5/64
3
/16 x 3/32
3
/16 x 3/32
No KW
1
/8 x 15/16
3
/16 x 3/32
3
/16 x 3/32
No KW
3
/16 x 3/32
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
3
/16 x 3/32
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
5
/16 x 5/32
5
/16 x 5/32
5
/16 x 5/32
3
/8 x 3/16
3
/8 x 3/16
5
/16 x 5/32
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
7
/16 x 7/32
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
1
/ 2 x 1/ 4
5
/8 x 5/16
5
/8 x 5/16
3
/4 x 3/8
L035
10124
10126
10127
10128
24687
L050
L070
L075
L090
10206
10416
10766
10207
10208
46121
44136
10209
44713
10417
10418
41985
48829
10419
44007
44066
10420
10421
52338
10423
24771
51104
10424
10425
46116
51719
10426
10680
35744
10681
10682
37234
35745
10683
28089
28875
10684
10685
10686
10687
44322
37240
10688
10689
56140
35881
10690
10691
56941
10692
10210
10211
10212
10213
10214
26209
10767
37235
37236
10768
28877
28878
10769
26087
24976
28876
46052
37241
10771
10772
54282
37246
10773
10774
10775
38188
32332
31296
37257
L095
L099
L100
11082
27613
28879
11083
26088
37239
11084
41911
37242
11085
11086
56887
37074
11087
11088
31297
38198
38199
11333
11334
11335
38200
44174
38201
11336
11337
11455
38202
11338
11339
59063
11340
38203
11341
11342
38204
11343
11344
11345
11505
37237
37238
11506
26089
11508
11509
44291
37243
11510
11511
45212
37247
11512
11513
11089
35747
11090
11091
37258
11092
11093
11514
35686
11515
11516
37259
11517
11518
11519
11520
35748
11521
11522
44348
L110
L150
11733
37244
26211
11734
12101
37245
26212
12102
37248
11735
11736
37249
12103
12104
11737
35749
11738
11739
37260
11740
11741
11742
11743
35752
11744
11745
37265
11746
37269
11747
11748
11749
12105
35750
12106
12107
37261
12108
12109
12110
12111
35751
12112
12113
37266
12114
37270
12115
12116
12117
12118
12119
37274
12120
12121
L190
L225
12285
37250
38468
37252
12422
12286
37256
12287
12288
12289
12290
12291
12292
37264
12293
12294
37267
12295
37271
12296
37273
12297
12298
12299
37275
12300
12301
12302
12303
12304
12305
35882
37255
12423
35753
12424
12425
37263
12426
12427
12428
12429
35754
26090
12430
37268
12431
37272
12432
12433
12434
12435
12436
37276
26091
12437
12438
12439
26092
12440
12441
12442
12443
41809
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
L276
12582
12585
54883
12586
12587
12588
12589
12590
46758
12591
12592
45689
12593
60057
12594
48250
12595
49762
12596
12597
12598
12599
12602
12605
12607
172
VC
Keyway
No KW
No KW
No KW
No KW
No KW
3 x 1.4
No KW
3 x 1.4
4 x 1.8
No KW
4 x 1.8
No KW
5 x 2.3
No KW
5 x 2.3
5 x 2.3
5 x 2.3
6 x 2.8
No KW
6 x 2.8
6 x 2.8
6 x 2.8
8 x 3.3
8 x 3.3
No KW
8 x 3.3
8 x 3.3
No KW
10 x 3.3
No KW
10 x 3.3
10 x 3.3
12 x 3.3
12 x 3.3
14 x 3.8
No KW
14 x 3.8
No KW
14 x 3.8
No KW
16 x 4.3
No KW
18 x 4.4
No KW
18 x 4.4
20 x 4.9
L035
41850
47419
45872
60679
55169
L050
46214
50351
10215
41460
41313
10216
41450
41314
48510
41315
58036
41316
60708
41451
56176
L070
58803
46151
56177
41452
49870
41453
51562
41454
47505
41317
41455
41318
45333
59724
41319
L075
L090
L095
L099
L100
L110
L150
52471
60156
L190
L225
L276
60945
44298
41456
41457
50811
44153
41321
10693
41458
41322
49398
41884
41323
41459
52846
52828
49424
48276
44329
41461
51231
52096
49198
46433
10777
41462
41925
41968
41463
41464
44832
41465
41466
46561
45778
41325
49704
46826
55195
60094
52697
46972
52098
44647
45101
41469
47123
55534
56178
41926
41326
41467
44827
41327
41468
44157
47122
41959
41990
45055
41329
52093
44467
41330
41470
52092
60067
44288
41471
49700
41804
45214
48301
41906
41328
50103
47132
41331
48317
41333
45681
41332
41334
49925
45682
41335
45683
41336
48821
61218
44720
48182
46751
56179
45679
41738
41472
41873
56180
46562
41337
48318
41338
45102
56181
56227
46717
61497
59109
52153
56182
52976
44471
41473
45562
56183
58035
41474
48320
41475
56017
51995
48322
56228
44392
56229
47006
48982
48319
41849
56184
52197
49664
49605
47492
52674
47569
56230
48797
56231
44089
56185
44598
56185
56544
56232
41885
52961
59308
45609
50292
61202
56233
45062
56234
56067
56235
56236
56237
50102
52868
NOTE: All finished bore hubs are provided with one set screw as standard. Non-standard bores available, consult engineering.
173
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
Type
SOX (NBR) (solid)
SOX (NBR) (open center)
Urethane (solid)
Urethane (open center)
Hytrel (solid)
Hytrel (open center)
Bronze (open center)
Snap Wrap w/ring
Snap Wrap no ring
AL050
AL070
AL075
AL090
AL095
AL099
AL100
AL110
AL150
10194
10406
10393
10395
10411
10621
10620
11070
10968
11070
10968
11494
11492
11494
11492
11724
11711
18027
10626
11075
11075
11499
11499
10198
25308
10409
25309
10624
25310
11073
24669
11071
25310
11073
24669
11071
11486
11497
24670
11495
11486
11497
24670
11495
11729
11717
38097
11727
24671
11725
AL095
AL099
AL100
AL110
AL150
17977
38888
44059
18035
44828
46642
17978
18036
17979
17980
17981
26094
17982
17983
17984
17985
17986
17987
17988
17989
17990
18037
18038
18039
18040
18041
18042
18043
18044
18045
18046
18047
18048
18049
18050
18051
18052
18053
AL150
37786
25307
Bore
1
/4
5
/16
3
/8
7
/16
1
/2
1
/2
9
/16
9
/16
5
/8
5
/8
11
/16
3
/4
3
/4
13
/16
7
/8
15
/16
1
11/16
1 1/ 8
13/16
11/4
15/16
1 3/ 8
17/16
11/2
19/16
15/8
111/16
1 3/ 4
113/16
17/8
Keyway
AL050
AL070
AL075
AL090
No KW
No KW
No KW
No KW
No KW
1
/8 x 1/16
No KW
1
/8 x 1/16
No KW
3
/16 x 3/32
3
/16 x 3/32
1
/8 x 1/16
3
/16 x 3/32
3
/16 x 3/32
3
/16 x 3/32
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
1
/ 4 x 1/ 8
5
/16 x 5/32
5
/16 x 5/32
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
3
/8 x 3/16
1
/2 x 1/4
1
/2 x 1/4
10252
10253
10254
10256
10257
49706
10463
10464
10466
10469
10471
10473
17880
17881
37994
44323
17914
17915
56473
17917
10480
10482
10791
10792
10793
10794
10795
10796
10797
44812
44004
10798
10799
47725
10800
10801
10802
17847
17848
10259
10630
10631
10632
10633
10634
10635
10637
10638
61817
10639
45227
47835
10640
10641
10642
17850
17851
46295
17852
17853
17854
17855
17856
17857
17858
17882
45494
17918
17919
17883
17884
17885
17886
17887
17888
17889
17890
17920
17921
17922
17923
17924
17925
17926
17927
17928
17929
17930
45508
Bore
8
10
11
12
14
15
16
17
19
20
20
22
24
25
28
30
32
35
36
38
42
Keyway
No KW
3 x 1.4
4 x 1.8
4 x 1.8
5 x 2.3
5 x 2.3
5 x 2.3
5 x 2.3
6 x 2.8
No KW
6 x 2.8
6 x 2.8
8 x 3.3
8 x 3.3
8 x 3.3
8 x 3.3
10 x 3.3
10 x 3.3
10 x 3.3
10 x 3.3
12 x 3.3
AL050
AL075
AL090
AL095
AL099
AL100
AL110
48973
41924
51098
65655
47302
49633
52221
56514
58620
60429
58621
58622
56800
56801
47014
44712
47012
58624
58625
49629
45012
59164
47253
59064
48327
47013
45736
49634
49630
49631
60878
58626
49709
58627
52048
44058
55687
47393
58266
45690
45933
45463
49632
54417
46215
64634
64633
AL070
65694
56487
65696
62906
65698
47427
56137
59394
60887
44679
47105
52692
45063
44347
51737
58215
45404
AL Type
Coupling Spiders
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
174
VC
C226
6
C276
6
C280
6
C285
6
C295
6
C2955
10
14547
27529
14545
40122
14633
14637
14712
14716
14771
14774
40123
40124
40292
14805
14808
51914
40293
14805
14859
51915
40293
Keyway
mm
30
35
38
40
42
45
48
55
60
65
70
75
80
90
95
8x3.3
10x3.3
10x3.3
12x3.3
12x3.3
14x3.8
14x3.8
16x4.3
18x4.4
18x4.4
20x4.9
22x5.4
22x5.4
25x5.4
25x5.4
C226
62792
60243
45348
49379
52550
54288
58011
C276
47386
62160
54037
45219
44723
58444
47265
52008
59032
C280
C285
C295
C2955
56794
54355
47813
58675
58676
58677
58678
58679
C Type Couplings
Complete coupling selection includes two
standard hubs, one cushion set, and one collar
with hardware
58265
52205
49012
49378
44487
54363
62695
Keyway
C226
C276
/4 x 1/8
40125
26036
40126
26050
26037
26038
26039
/8 x 3/16
3
/8 x 3/16
3
/8 RSB
11/8
1
1 /4 RSB
11/4
13/8
17/16
1
1 /2 RSB
11/2
15/8
13/4 RSB
13/4
17/8
2
21/8
21/4
23/8
21/2
25/8
27/8
3
33/8
31/2
35/8
33/4
37/8
4
175
/4 x 1/8
5
/16 x 5/32
3
/8 x 3/16
C280
C285
C295
C2955
26051
26052
26067
48988
46278
41036
47173
55546
26040
26041
26053
26054
46277
46194
48366
41892
41037
44824
56078
26042
20643
26044
26045
20646
26047
26048
26055
26056
26057
26058
44547
26060
46120
46755
26064
44011
44012
48194
44370
52311
51533
45780
47080
49809
44711
44014
51998
44013
51525
48193
47288
56779
49456
44825
45249
50145
52702
52703
48454
54549
48108
47171
46844
45402
52988
49077
44545
50106
58378
49351
55016
41038
/8 x 3/16
1
/2 x 1/4
1
/2 x 1/4
1
/2 x 1/4
1
/2 x 1/4
5
/8 x 5/16
5
/8 x 5/16
5
/8 x 5/16
3
/4 x 3/8
3
/4 x 3/8
7
/8 x 7/16
7
/8 x 7/16
7
/8 x 7/16
7
/8 x 7/16
1 x 1/2
1 x 1/2
48247
49075
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
VC
Performance Data
Basic HP Ratings
@Varying RPM
Nm
Maximum
RPM
1000
.375
31.0
.625
.625
16
16
18.0
18.0
4.88
12.88
.750
.750
19
19
14.0
14.0
90.0
227.0
10.17
25.65
.875
.875
22
22
11.0
11.0
4.11
11.50
144.0
401.0
16.27
45.31
1.00
1.00
25
25
9.0
9.0
.310
.890
5.50
16.00
194.0
561.0
21.92
63.38
1.12
1.12
28
28
9.0
9.0
3
3
.500
1.260
9.10
22.60
318.0
792.0
35.93
89.48
1.18
1.18
30
30
7.0
7.0
SOX (NBR)
Hytrel
3
3
.660
1.800
11.90
32.40
417.00
1134.0
47.11
128.12
1.38
1.38
35
35
7.0
7.0
L110/AL110
L110/AL110
SOX (NBR)
Hytrel
3
3
1.260
3.600
23.00
65.00
792.0
2268.0
89.48
256.25
1.62
1.62
42
42
5.0
5.0
L150
L150
SOX (NBR)
Hytrel
3
3
2.000
5.900
35.00
106.00
1240.0
3708.0
140.10
418.95
1.88
1.88
48
48
5.0
5.0
AL150
SOX (NBR)
2.300
41.40
1450.0
163.63
1.88
48
5.0
L190
L190
SOX (NBR)
Hytrel
3
3
2.700
7.400
49.00
134.00
1728.0
4680.0
195.24
528.77
2.12
2.12
55
55
5.0
5.0
L225
L225
SOX (NBR)
Hytrel
3
3
3.700
9.900
67.00
178.00
2340.0
6228.0
264.38
703.67
2.62
2.62
65
65
4.2
4.2
L276
SOX (NBR)
7.500
135.00
4716.0
532.84
2.88
73
1.8
Torque Rating
Elastomeric
Member
Number
of Jaws
L035
SOX (NBR)
.006
.10
3.5
.40
L050/AL050
L050/AL050
SOX (NBR)
Hytrel
2
2
.042
.080
.75
1.43
26.3
50.0
2.97
5.65
L070/AL070
L070/AL070
SOX (NBR)
Hytrel
2
2
.070
.180
1.23
3.26
43.2
114.0
L075/AL075
L075/AL075
SOX (NBR)
Hytrel
3
3
.140
.360
2.57
6.48
L090/AL090
L090/AL090
SOX (NBR)
Hytrel
3
3
.230
.640
L095/AL095
L095/AL095
SOX (NBR)
Hytrel
3
3
L099/AL099
L099/AL099
SOX (NBR)
Hytrel
L100/AL100
L100/AL100
Size
100
1800
in-lbs
Nm
Bore
inch
L and AL TYPE
C TYPE
C226
C226
SXB (NBR)
Hytrel
3
3
4.700
9.400
85.00
170.00
2988.0
5940.0
337.60
671.13
2.50
2.50
64
64
4.8
4.8
C276
C276
SXB (NBR)
Hytrel
3
3
7.500
15.000
135.00
269.00
4716.0
9432.0
532.84
1065.67
2.88
2.88
73
73
4.2
4.2
C280
C280
SXB (NBR)
Hytrel
3
3
12.000
22.000
216.00
396.00
7560.0
13866.0
254.17
1566.65
3.00
3.00
76
76
3.5
3.5
C285
C285
SXB (NBR)
Hytrel
3
3
14.600
26.000
262.00
476.00
9182.0
16660.0
1037.43
1882.33
4.00
4.00
102
102
3.2
3.2
C295
C295
SXB (NBR)
Hytrel
3
3
18.000
36.000
324.00
648.00
11340.0
22680.0
1281.25
2562.50
3.50
3.50
89
89
2.3
2.3
C2955
C2955
SXB(NBR)
Hytrel
5
5
30.000
60.000
540.00
1080.00
18900.0
37800.0
2135.42
4270.83
4.00
4.00
102
102
2.3
2.3
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
176
VC
Dimensions
Size
NBR
SOX
L035
10118
L050
10194
L070
10406
L075
10621
1.75
L090
11070
2.12
.18
L095
11070
2.12
L099
11494
2.53
L100
11494
37786
25307
Size
NBR
SOX
.062
L035
1.06
L050
10498 1.06
1.38
L070
10393
10395
25308
10409 1.38
NBR
AA
HH
All
Size
L035
N/A
L035 .27
.31
L050
N/A
L050 .40
.50
L070
N/A
L070 .42
N/A
L075
10620
10626
25309
10624 1.75
.75
L075
.87
L090
10968
11075
25310
11073 2.12
.87
L090 .44
L075 .44
.18
.87
L095
10968
11075
25310
11073 2.12
.87
L095 .44
.25
1.03
L099
11492
11499
11486
L099 .63
2.53
.25
1.03
L100
11492
11499
11486
L100 .63
1.18
L110
11711
11729
38097
L110 .75
L110
11724
11717
3.31
NBR .25
HYT .18
L150
12001
11993
3.75
NBR .31
HYT .21
1.25
L150
37880
12006
38098
L150 .88
L190
12274
12265
4.50
NBR .31
HYT .18
1.38
L190
37881
12280
38099
L190 .88
L225
12409
12400
5.00
NBR .38
HYT .18
1.75
L225
12406
12417
12401
L225
L225 .92
L276
12612
L276
N/A
L276 1.50
L276
177
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
VC
Dimensional Data
L Type Flexible Couplings
Style 1
Style 2
Style 3
Vescor
Part
Style
Bore
Number No. Min. Max.
Outer
Dia.
OD
Overall
Length
OAL
Gap
G
Length
Thru
Bore
LTB
Hub
Dia.
HD
Clearance
CL
Set
Screw
Location
SL
Collar
Dia.
CD
Set
Screw
Size
T
Moment
of Inert
WR2
Weight Lbs.
in-lb3
Solid Max Bore (Solid)
L035
L050
L070
L075
L090
L095
L099
L100
L110
L150
L190
L225
L276
C226
C276
C280
C285
C295
C2955
1
1
1
1
1
1
1
1
1
1
2
2
2
3
3
3
3
3
3
.125
.250
.250
.250
.250
.437
.437
.437
.625
.625
.750
.750
.875
.875
.875
1.250
1.250
1.500
1.750
.375
.625
.750
.875
1.000
1.125
1.188
1.375
1.625
1.875
2.125
2.625
2.875
2.500
2.875
3.000
4.000
3.500
4.000
.62
1.08
1.36
1.75
2.11
2.11
2.54
2.54
3.31
3.75
4.50
5.00
6.18
5.15
6.18
7.50
8.50
9.12
9.12
.81
1.72
2.00
2.12
2.12
2.50
2.87
3.50
4.25
4.50
4.88
5.38
7.87
7.00
7.87
7.87
9.13
9.38
10.38
.27
.48
.50
.50
.50
.50
.75
.75
.87
1.00
1.00
1.00
1.63
1.50
1.63
1.63
1.63
1.88
1.88
.27
.62
.75
.81
.81
1.00
1.06
1.37
1.69
1.75
1.94
2.19
3.12
2.75
3.12
3.12
3.75
3.75
4.25
.62
1.08
1.36
1.75
2.11
2.11
2.54
2.54
3.31
3.75
4.00
4.25
5.00
4.12
5.00
5.50
6.50
6.31
7.12
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.12
.12
.12
.12
.12
.12
.13
.31
.38
.31
.44
.44
.44
.44
.75
.75
.88
1.00
1.56
1.38
1.56
1.56
1.75
1.88
2.12
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5.50
6.53
7.81
8.88
9.62
9.62
#6-32
/4-20
1
/4-20
1
/4-20
1
/4-20
5
/16-18
5
/16-18
5
/16-18
3
/8-16
3
/8-16
1
/2-13
1
/2-13
1
/2-13
1
/2-13
1
/2-13
1
/2-13
5
/8-11
5
/8-11
5
/8-11
.1
.003
.3
.6
1.0
1.5
1.8
2.5
3.5
6.6
9.1
17.0
23.0
47.0
29.0
47.0
61.0
87.0
97.0
117.0
.2
.4
.8
1.2
1.3
2.0
2.5
5.0
7.0
13.0
18.0
36.0
22.0
36.0
49.0
68.0
78.0
90.0
.054
.115
.388
.772
.890
2.048
2.783
8.993
11.477
39.256
65.000
188.000
74.000
188.000
362.000
642.000
862.000
392.000
AL050
AL070
AL075
AL090
AL095
AL099
AL100
AL110
AL150
4
4
5
5
4
5
5
4
5
.250
.250
.250
.500
.500
.500
.500
.625
.625
.625
.750
.875
.875
1.125
1.187
1.375
1.625
1.875
1.08
1.36
1.75
2.12
2.12
2.53
2.53
3.31
4.25
1.72
2.00
2.12
2.34
2.50
2.81
3.50
4.25
4.50
.48
.50
.50
.52
.50
.75
.75
.87
1.00
.56
.75
.81
.91
1.00
1.03
1.37
1.69
1.75
1.08
1.36
1.53
1.53
2.12
2.06
2.41
3.31
3.19
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.31
.38
.31
.34
.44
.44
.44
.75
.63
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.2
.3
.4
.5
.8
1.0
1.5
2.7
3.7
.2
.2
.3
.4
.6
.8
1.1
2.1
2.8
.020
.040
.121
.271
.336
.644
1.207
3.531
7.002
/4-20
/4-20
1
/4-20
1
/4-20
5
/16-18
5
/16-18
5
/16-18
5
/16-18
5
/16-18
1
.1
Hubs are standard with one set screw. AL150 has 2 set screws provided.
Style 4
Style 5
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03
178
VC
Splined Shafts
Installation Instructions for Fluid Power Applications
Spline bores furnished by Vescor are provided with a special spline
locking feature called Centaloc (see Fig. 1).
Spline shafts: For optimum spline shaft life, Vescor recommends full
shaft engagement in the coupling hub.(see Fig 2.) Caution: If only
partial spline shaft engagement is used, tightening of the special
Centaloc spline locking feature set screw over the unused section of
Figure 1
the spline bore will result in damage to the hub. Before tightening the
Centaloc set screws, check to see if the spline shaft is engaged under
the set screws.Then tighten the Centaloc set screws to the recommended torque shown below. If only one of the two Centaloc set
screws is used because of limited shaft engagement, please remove
the unused set screw. (see Fig. 3)
Figure 2
Figure 3
C
9
/32
/32
1
/2
1
/2
1
/2
1
/2
3
/4
3
/4
7
/8
1
1
1
15/8
11/2
15/8
15/8
15/8
15
Min-Shaft
Separation*
9
/32
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
1
/8
Set Screw
Size
5
/16-18UNC
5
/16-18UNC
5
/16-18UNC
5
/16-18UNC
3
/8-16UNC
3
/8-16UNC
5
/8-11UNC
5
/8-11UNC
*
*
*
Torque
ft.-lb.
13
13
13
13
23
23
100
100
*
*
*
Coupling
Size
L035
L050-L090
L095-L100
L110-L150
L190-L276
C225
C280
C285
Set Screw
Size
6 -32
1
/4-20
5
/16-18
3
/8-16
1
/2-13
1
/2-13
1
/2-13
5
/8-11
Torque
ft.-lb.
10
80
160
275
600
600
600
1200
Misalignment Data
Type of
Spider
Angular
Parallel
NBR (SOX)
Hytrel
Urethane
1
1/2
1
.015
.015
.015
179
NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
1 JULY 03