Embedded systems Ph:7842522786 9948887244

2013

Automatic Measurement and Reporting System of Water Quality Based on GSM

Abstract:
With the rapid development of the economy, more and more serious problems of environment arise. Water pollution is one of these problems. Routinely monitored parameters of water quality are temperature, pH, turbidity, conductivity, dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD), ammonia nitrogen, nitrate, nitrite, phosphate, various metal ions and so on. Sensor is an ideal detecting device to solve these problems.

Existing System:
The most common method to detect these parameters is to collect samples manually and then send them to laboratory for detecting and analyzing. This method wastes too much manpower and material resource, and has the limitations of the samples collecting, long-time analyzing, the aging of experiment equipment and other issues. So we go for the proposed system to make the system easy.

Proposed System:
In the Proposed system we are having the PH sensor, flow sensor and temperature sensor, microcontroller, GSM modem and LCD. The sensor values are analog values then the values will be converted into the digital values by using the inbuild ADC module. If the values are abnormal then the system will send the message to the monitoring section. And the values will be uploaded in internet.

skesystems@gmail.com

Vijayawada

Hyderabad

Page 1

Embedded systems Ph:7842522786 9948887244

2013

Block Diagram: Quality Sensing Unit:

Power Supply

PH sensor

MAX232

Flow sensor

PIC Micro controller

GSM Modem

Temperature Sensor

Monitoring section:

skesystems@gmail.com

Vijayawada

Hyderabad

Page 2

Embedded systems Ph:7842522786 9948887244

Power Supply

2013

PC

MAX232

GSM Modem

Hardware requirement:
PIC Microcontroller PH sensor Temperature sensor Flow Sensor GSM Modem MAX232 LCD

Software requirement:
MPLAB Embedded C

Advantage:
Fast response. Reduce the manual power.

skesystems@gmail.com

Vijayawada

Hyderabad

Page 3