You are on page 1of 32

BELL MOUTH DESIGN PARAMETERS

By Yussef Rikli

1:NO HOLE

2:BELL MOUTH

3:ENGINE, 0.3M DIAMETER PIPE

4:ENGINE, 0.2M DIAMETER PIPE

5:ENGINE, 0.2M DIAMETER PIPE & LOWERED 3 INCHES.

SUMMARY OF RESULTS
Approx. velocity inside m/s 1: No hole
2: Bell mouth 3: Engine 0.3 4: Engine 0.2 5: Engine 0.2 lowered pipe

Cd 0.668
0.705 0.662 0.701 0.675

Total forces 395.2


417.3 391.7 415 399.5

38 39.1 46 38.5

MODELS & SOLUTION METHODS


Models-Viscous: laminar, k- turbulent. Solution methods-Spatial discretization: first order, second order.

LAMINAR FIRST ORDER

LAMINAR SECOND ORDER

TURBULENT SECOND ORDER

QUESTIONS?
If anything is not covered here or in the report feel free to contact me; Yussefrikli@gmail.com

You might also like