Professional Documents
Culture Documents
00
G SHOP ~ 20 YEA
KIN RA
OR
W
NN
OD
IVE
GSPOR’S WO
RSARY
KLIN
www.woodworkingshop.com • 800-228-0000
Dear Fellow Woodworker,
As our summer draws to an end, kids go back to school and we once again settle into our
work schedules, we need to think about our own well-being – and that means taking time to
TABLE OF
2 wind down and enjoy our woodworking! There is enough stress in our everyday lives and
relaxing by using our hands and creating something is the perfect way to relieve this stress.
CONTENTS
So sit back and take some time to check our new Klingspor’s Woodworking Shop catalog and
ABRASIVE ACCESSORIES ..............10
all of the new items we have to offer. There’s sure to be something in your area of expertise
that you’ll find interesting and most of all, necessary. Thanks for shopping with Klingspor’s BARGAIN BOXES ................................3
Woodworking Shop! BELT SANDING ....................................6
Happy Woodworking! BLADES................................................36
BOOKS ................................................29
BUFFING & POLISHING ....................15
Christoph Klingspor, President CARVING ............................................56
CLAMPS ..............................................88
P.S. Be sure to look closely at the NEW Tool Zone Multi-Tool below!
CONTOUR SANDING
& SHAPING ........................................4
Bargain Box of Sheets DETAIL SANDING ..............................75
The bargains seem to never end at Klingspor’s Woodworking Shop. DISC SANDING ..................................46
Make our loss your gain with the Bargain Box of Sheets. Our other
Bargain Boxes have supplied top quality sandpaper in various dif- DRILLING ............................................39
ferent forms to woodworkers across the country for
many years. Now with this sheets bargain box,
DRUM SANDERS................................66
you’ve got something else to be excited about. DUST COLLECTION ..........................78
We’re packing this box full of 5 pounds of our
very best and heaviest weight paper materials FEIN TOOLS ........................................77
cut into useable sizes of no less than 4-1/2"
in length and width. That means each piece
FINISHING ..........................................16
is perfect for simply sanding with your hand, sanding FLOOR SANDING ..............................80
with a hand block or even on a sheet sander. Also, as you
know, you rarely will do any hand sanding in grits coarser FOAM SANDING ................................69
than 100. So we’re loading up the box with a nice random
assortment of grits that will range from medium to fine - not
GLUE ....................................................85
to exceed 400 grit– a tremendous variety to accomplish most of your final sanding needs. Try the latest, HARDWARE ........................................80
greatest Bargain Box from Klingspor’s Woodworking Shop Catalog today!
MACHINE ACCESSORIES ................42
BARGAIN BOX OF HEAVYWEIGHT PAPER SHEETS #BB45110..........................$15.95 MEASURING & LAYOUT ....................30
METAL AND TOOL
Tool Zone Multi-Tool PROTECTANTS................................43
ORDER FORM ....................................90
PEN BLANKS ......................................55
POWER GRINDING............................63
PUMP DRUMS ....................................14
ROLLS ..................................................67
ROUTING ............................................32
SAFETY................................................64
SANDERS ............................................72
SCRAPERS/PLANES ........................89
SHARPENING ....................................59
The new Tool Zone Multi-Tool delivers 11,000 oscilla- • Comes with 4 different attachments: triangular
SHEET SANDING ..............................12
tions per minute to handle a wide variety of jobs sanding pad, slitting (half moon) saw blade, circular SHOP HELPERS ................................81
around the shop and around the home. Perfect for saw blade, and scraper blade. Includes hex key for
remodeling and repair jobs like tile cutting and repair, fast accessory changeout. SLEEVE SANDING ............................70
removing caulking and grout, replacing windows, and • Die cast aluminum gear housing TABLE SAW HELPERS ......................44
perfect too for your special woodworking needs. • Sealed bearings for long life
Sand into tight corners and hard-to-reach areas with TURNING ............................................53
the supplied triangular sanding pad and use the cut- Rated Voltage: 120v; Rated Frequency: 60Hz;
ting blades for small trim work and for hobby work. Rated Input Power: 180w
This is your opportunity to have the multi-tool with SEE PAGE 91 FOR COMPLETE INDEX
accessories you’ve always wanted all at a new afford- TOOL ZONE MULTI-TOOL
able price. #TZ30000 ..........................................$59.95
Bargain Box
Would you like to get up to $100 worth of
Sanding Power for only $1995? How about up
to $200 worth of Sanding Power for only $3495?
20 LB.
Then look no further than KLINGSPOR’S WOODWORKING SHOP Bargain Boxes! COARSE/MED./FINE
Like thousands of our customers across the country, you’ll never need another #BB00006
$
34 95
source for sanding products once you’ve purchased a Bargain Box.
Why has this simple idea become so famous? Because there’s not a better sandpaper deal any-
where - plain and simple! Plus, woodworkers all around the world are realizing that this amount
of sandpaper is virtually priceless in the shop. Imagine never having to dig through your
shop to find the perfect piece of sandpaper - you’ll have a box loaded
with all usable pieces. The best part is that these are our premi-
um products that are meant for the rigors of industrial use. That
means you’re not only getting plenty of sandpaper, you’re getting
the best sandpaper available on the market today. You’ll find so
many uses for this stuff – hand sanding, disc making, etc.
23/8"x2"x1/4" 31/8"x2"x1/4"
Spindle Mounted Flapwheels
We haven’t placed much emphasis on these versatile products,
Max RPM 3,700 3,700 but the number of uses expand constantly. With a 1/4" spin-
150 Grit FW94810 FW94835 dle, they will fit most tools with a 1/4" chuck-drill press,
$10.95 12.95 hand-held drills. Bowl turners will appreciate these
80 Grit FW94800 FW94831 immediately. When you’ve got small concave or convex
surfaces to sand, remember Spindle Mounted
$10.95 12.95 Great for
Flapwheels from Klingspor’s Woodworking Shop. grinding &
polishing
metal!
Mac Mop Finishing Contours and Profiles Shouldn't Be a Hassle. 1/4" Spindle Mounted Flapwheels
1"x 1/2" 1"x 1" 2"x 1" 3"x 1"
Turnings, carv- defuzz your work without effecting or alter-
ings, chair arms ing any of the profiles. The Mac Mop will Max RPM 22,900 22,900 13,700 8,500
and legs, ballis- definitely improve the finishing stages of 180 Grit FW97627 FW97631 FW97644 FW97655
ters and other your project by sanding off all of the loose 3.95 4.25 5.75 6.95
shaped and con- fibers that have been pressed into the 120 Grit FW97551 FW97555 FW97569 FW97583
toured parts can wood during previous sanding applica- 3.95 4.25 5.75 6.95
be sanded easi- tions. This will in turn make for a smoother 80 Grit FW97469 FW97473 FW97488 FW97503
er, better and first coat of finish to build on. Simply con- 3.95 4.25 5.75 6.95
faster when sider this the best profile sanding device
60 Grit FW97423 FW97427 FW97440 FW97456
using our Mac on the market today.
Mop. KLINGSPOR’s Mac Mop is an exclu- Mac Mops should be mounted onto sta-
$3.95 4.25 5.75 6.95
sive of Klingspor’s Woodworking Shop tionary machines with motors ranging
and consists of hundreds of strips of flexi- from 1/2 hp to 3 hp and shaft diameters of SHOP ONLINE FOR OUR FULL LINE OF PRODUCTS
ble sandpaper that are bonded to a strong at least 1/2" in diameter. Ideal speeds for WWW.WOODWORKINGSHOP.COM
epoxy core. These small strips quickly find the Mac Mop are between 1100 and 2500
their way into all the recesses that your rpm but should never exceed 3400 rpm.
piece may have. Due to the nature and
design of the Mac Mop, the sanding action
Sand-O-Flex
is very passive and will sand, polish and Profile Sander
Perfect for sanding contours, profiles and
Dia x Width 10" x 2" 10" x 4" carved parts, the Sand-O-Flex wheel is a
Max RPM 3,400 3,400 quick fix for these sanding problems. The
180 Grit MM00518 MM00519 abrasive flaps are backed by brushes that
help to push the sandpaper into the desired
$89.95 149.95 surface shape. The slashed abrasive works
120 Grit MM00514 MM00515 REPLACEMENT SANDPAPER:
great on more severe profiles and contours
$89.95 149.95 or for flat surfaces and minor contours. The 80 Grit #MA8000......$10.95
These must be used with the mounting replacement sandpaper is held conveniently 100 Grit #MA1000......$10.95
80 Grit MM00510 MM00511
plates which are included in the price of in the center core of the wheel so when you
$89.95 149.95 the wheel. Please specify a bore size. 120 Grit #MA1200......$10.95
need to “freshen” your sandpaper, simply
Mounting Plates for 10" Mac Mop pull it out of the core and cut off the old ends. 150 Grit #MA1500......$10.95
BORE BORE 180 Grit #MA1800......$10.95
MP97314 ..........................1/2" MP97319 ............................1" Maximum rpm-2400 240 Grit #MA2400......$10.95
MP97316 .......................... 5/8" MP07737 ..........................11/8" SAND-O-FLEX WHEEL 320 Grit #MA3200......$10.95
MP97317 .......................... 3/4" MP97321 ..........................11/4" #MA35000....................$32.95
MP97318 ..........................7/8" MP97322 ..........................11/2" Replacement Brushes Adapter for 1/4" to 1/2" use
Mounting plates bought without Mac Mop ........................$4.95 per pair #MA130........................$12.95 #MA11055......................$7.95
6 KLINGSPOR’s
Famous Box of Belts
$
29 00
36 Belts For Only
$
19 95
materials in their production operations. So you too can pick any six item numbers from your size group and
now benefit from using the ultimate in industrial materi- you’re in business! So, if you’re a die-hard belt sander
als and SAVE MONEY in the process. If you’ve never user, and you haven’t tried the Box of Belts, you’re in for
used REAL industrial belts, then you don’t know what a real treat!
you’re missing. Even a casual user will realize the
DON’T DELAY
Order your Box of Belts today. Choose from six popular sizes:
EXTRA FINE FINE MEDIUM COARSE X-COARSE
320 240 220 180 150 120 100 80 60 50 40 36
Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit
21/2" x 16" BZRD68602 BZRD68600 BZRD68599 BZRD68598 BZRD68597 BZRD68596 BZRD68595 BZRD68594 BZRD68593 BZRD68592 BZRD68591 BZRD68436
3"x 18" BZRD68615 BZRD68613 BZRD68612 BZRD68611 BZRD68610 BZRD68609 BZRD68608 BZRD68607 BZRD68606 BZRD68605 BZRD68604 BZRD68603
3"x 21" BZRD68629 BZRD68627 BZRD68626 BZRD68625 BZRD68624 BZRD68623 BZRD68622 BZRD68620 BZRD68619 BZRD68618 BZRD68617 BZRD68616
3"x 24" BZRD68642 BZRD68640 BZRD68639 BZRD68638 BZRD68637 BZRD68636 BZRD68635 BZRD68634 BZRD68633 BZRD68632 BZRD68631 BZRD68630
4" x 21" BZRD68655 BZRD68653 BZRD68652 BZRD68651 BZRD68650 BZRD68649 BZRD68648 BZRD68647 BZRD68646 BZRD68645 BZRD68644 BZRD68643
4" x 24" BZRD68730 BZRD68667 BZRD68666 BZRD68665 BZRD68664 BZRD68662 BZRD68661 BZRD68660 BZRD68659 BZRD68658 BZRD68657 BZRD68656
Klingspor Classic Portable Belts Wide Belts Use The Same Belts As
Performance That’s Easy On The Wallet The Large Furniture Manufacturers!
With this Classic abrasive belt material from KLINGSPOR, you’ll KLINGSPOR wide belts are made daily for our large furniture
manufacturing customers.This product consists of a heavy-duty cloth
price point. Together, these equal “The Most Sanding Power for
realize excellent sanding performance paired with an outstanding
backing, our premium aluminum oxide grains and heat resistant resins. The
Your Money!” grains are applied in an open coat form to reduce loading and extend cut-
ting life. For any wide belt application, KLINGSPOR wide belts will outper-
Made from premium aluminum oxide grains, resin bonded to a form and outlast any competitor’s belts.
cloth backing, you’ll find that this classic material outlasts most Price Per Belt 16"x 48" 25"x 60" 36"x 60" 37"x 75"
companies’ premium belt materials! This cloth backing is more
pliable than our premium belt backings, making it perfect for use 220 Grit WB41157 WB48535 WB48568 WB48600
in the majority of your sanding applications. Additionally, we’ve $18.95 $27.95 $38.95 $46.95
made this product with an open coat grain structure that helps to 180 Grit WB34119 WB64126 WB64152 WB64180
decrease the loading that often occurs when sanding soft or $18.95 $27.95 $38.95 $46.95
resinous woods. Overall, you’ll be receiving a belt that’s of con-
sistent quality each and every time that’s perfect for everyday
150 Grit WB41158 WB63256 WB63301 WB63340
portable belt sanding. $18.95 $27.95 $38.95 $46.95
120 Grit WB34118 WB61817 WB61892 WB61942
BEST DEAL $18.95 $27.95 $38.95 $46.95
100 Grit WB51410 WB59351 WB59423 WB59467
Stock up on these quality belts packaged in convenient quantities of 10 or the value priced 20-Belt
Assortment that includes the following pre-packaged grits: $18.95 $27.95 $38.95 $46.95
80 Grit WB39851 WB56577 WB56676 WB56724
20 Belt Assortment Includes:
40 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit $20.45 $28.45 $39.95 $47.95
60 Grit WB43419 WB53942 WB54012 WB54040
1 1 3 5 2 5 3
$20.95 $30.45 $40.95 $48.95
Price Per
10 Pack 1"x 30" 1"x 42" 3" x 21" 4" x 24" 4" x 36" 6" x 48"
20 BELT EB00071 EB99064 EB99063 EB99072 EB99073 EB99074
ASSORT $18.95 $19.95 $24.95 $37.95 $48.95 $89.95
150 Grit EB21117 EB21118 EB21122 EB21127 EB21128 EB21130
$11.95 12.95 13.95 18.95 27.95 53.95
120 Grit EB19858 EB19860 EB19872 EB19884 EB19886 EB19894
$11.95 12.95 13.95 18.95 27.95 53.95
100 Grit EB18448 EB18449 EB18457 EB18465 EB18466 EB18468
$11.95 12.95 13.95 18.95 27.95 53.95
80 Grit EB17169 EB17171 EB17180 EB17191 EB17194 EB17202
$11.95 12.95 13.95 18.95 27.95 53.95
60 Grit EB16042 EB16045 EB16052 EB16062 EB16063 EB16068
$11.95 12.95 13.95 18.95 27.95 53.95
50 Grit EB15667 EB15670 EB15678 EB15685 EB15686 EB15691
$11.95 12.95 13.95 18.95 27.95 53.95
40 Grit EB15555 EB15557 EB15565 EB15573 EB15575 EB15579
$11.95 12.95 13.95 18.95 27.95 53.95
Economy Belts available only in the sizes listed above.
Price Per Belt 1"x 30" 1"x 42" 3" x 21" 3" x 24" 4" x 24" 4" x 36" 6" x 48"
With powerful special DC motor, quiet and long-
80 Grit PL89027 PL89031 PL89180 PL89184 PL89248 PL89253 PL89550 lasting. The sanding belt is located flush on the left
$1.93 2.22 2.61 2.79 4.55 5.50 9.72 side to allow surfaces to be sanded "right down to
60 Grit PL87567 PL87571 PL87701 PL87704 PL87759 PL87766 PL87873 the corner". Fine adjustment for the rollers pre-
vents running off on the side. Spring clamping sys-
$1.98 2.29 2.72 2.91 4.71 5.66 10.19 tem for easy replacement of belts without tool.
50 Grit PL05600 PL86597 PL86699 PL86701 PL86737 PL86739 PL86808 Housing made of fibreglass reinforced
$2.03 2.36 2.80 3.01 4.86 5.95 10.65 POLYAMIDE. Complete with screw clamp and 5
each 120 grit and 240 grit sanding belts.
40 Grit PL05601 PL85662 PL85752 PL85754 PL85796 PL85799 PL85855 Technical data: 110 - 120 V. 1/5 hp (150 W). Sanding
$2.10 2.42 2.91 3.14 5.00 6.23 11.12 belt 1 37/64" x 10 7/16" (40 x 265 mm). Sanding sur-
36 Grit PL84434 PL84437 PL84539 PL84540 PL84583 PL84586 PL84667 face 2 23/64" x 1 37/64" (60 x 40 mm). Belt speed 525
ft/min (160 m/min). Weight 1.5lb (700 g).
$2.26 2.51 3.03 3.27 5.20 6.51 11.66
24 Grit PL32732 PL83717 PL83795 PL83796 PL83835 PL07296 PL83877 Belt Sander BBS
$2.44 2.67 3.27 3.55 5.57 7.08 12.77 #PX38526 ............................$159.00
ASSORTMENT PL00130 PL00142 PL00321 PL00324 PL00424 PL00436 PL00648
ALUMINUM
1 of each grit $9.65 10.96 13.14 14.16 22.67 27.99 50.09
OXIDE BELTS
FOR BBS - 5 PACK
80 Grit #PX28922 ............$10.75
Premium Belts for Standard Size Machines 120 Grit #PX28924 ............$10.75
180 Grit #PX28926 ............$10.75
Unprecedented Life and Consistency 240 Grit #PX28928 ............$10.75
We use only the best cloth materials to give you superior strength and premium tear resistance.
Price Per Belt 1"x 30" 1"x 42" 3" x 21" 3" x 24" 4" x 24" 4" x 36" 6" x 48" 6" x 80" 6" x 89"
320 Grit PB49726 PB49731 PB49847 PB49850 PB49902 SB49906 SB50000 ST50010 ST50013
$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95
220 Grit PB47720 PB47724 PB47849 PB47852 PB47925 SB47930 SB48036 ST48051 ST48055
$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95
180 Grit PB63699 PB63702 PB63742 PB63476 PB63775 SB63780 SB63838 ST63846 ST63848
$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95
150 Grit PB62561 PB62564 PB62607 PB62613 PB62643 SB62645 SB62732 ST62745 ST62748
$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95
120 Grit PB60355 PB60358 PB60452 PB60462 PB60526 SB60538 SB60717 ST60740 ST60748
$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95
100 Grit PB57565 PB57571 PB57688 PB57698 PB57780 SB57791 SB57983 ST58013 ST58025
$1.55 1.75 2.03 2.17 3.56 4.30 7.54 9.95 10.95
80 Grit PB54595 PB54602 PB54753 PB54761 PB54861 SB54875 SB55132 ST55161 ST55174
$1.57 1.78 2.09 2.23 3.65 4.43 7.80 10.25 11.25
60 Grit PB52863 PB52865 PB52943 PB52953 PB53006 SB53014 SB53152 ST53167 ST53171
$1.62 1.85 2.18 2.34 3.78 4.62 8.19 10.65 11.65
50 Grit PB30645 PB30648 PB30806 PB30817 PB30891 SB30899 SB31050 ST31066 ST31071
$1.66 1.90 2.25 2.42 3.90 4.81 8.55 11.25 12.25
40 Grit PB52348 PB52349 PB52402 PB52409 PB52433 SB52438 SB52481 ST52492 ST29749
$1.69 1.95 2.34 2.52 4.02 4.99 8.93 11.75 12.75
36 Grit PB51942 PB51943 PB51988 PB51992 PB52016 SB52019 SB52052 ST52058 ST52060
$1.74 2.02 2.43 2.63 4.17 5.22 9.36 12.25 13.25
SandDevil
Use Sanding Belts For Hand Sanding - Now with new quick release!
FINE
uations. These sticks use an abrasive belt that is held on with a RED LS25015 LS45015 LS65015 120 Grit LB01123 LB01066 LB31755
COARSE
spring loaded tension end.This allows you to rotate the belt around $2.95 3.95 4.95 $6.95 7.45 8.75
the stick to get maximum use out of it. With three widths available, GRAY LS25070 80 Grit LB01124 LB01125 LB01126
1/4", 1/2", and 3/4", you’ll be certain to find one for every situation. $2.95 $6.95 7.45 8.75
used with Hook & Loop paper.You’ve got to Kit w/paper #VB25000.........$16.95 DOUBLE DENSITY BLOCK 9/16"
try this one to know what comfort along with Consists of (1) 10 pack each of 100 grit,
150 grit, 220 grit and one hand block #KL05265...........................$4.95
functionality is all about.
Cut To Size Sandpaper Sheets
320 Grit 220 Grit 150 Grit 120 Grit
KS84938 KS84936 KS84934 KS84933 KS84932 KS84931
100 Grit 80 Grit
SHOP ONLINE FOR OUR FULL LINE OF PRODUCTS
WWW.WOODWORKINGSHOP.COM
ITEM #
10PK $4.95 4.95 4.95 4.95 4.95 4.95
FEIN Triangle Sander Replacement Sheets (Aluminum Oxide Open Coat F Weight) Hook & Loop
EXTRA FINE FINE MEDIUM
240 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit
ITEM# FE90046 FE89044 FE88040 FE87042 FE85045 FE84041 FE83043
5 Pack $6.95 6.95 6.95 6.95 6.95 6.95 6.95
ITEM# FT33320 FT33220 FT33180 FT33150 FT33120 FT33100 FT33080
50 Pack $18.95 18.95 18.95 18.95 18.95 18.95 18.95
FEIN TRIANGLE SANDER REPLACEMENT DISCS 50 PACK ASSORTMENT: 10 each 60, 80, 120, 180, & 240 grit
WITH HOLES #FE09035..............$25.95 NO HOLES #FE82033 ..............................$25.95
#KL05235..........$7.95
Tight Nose Inner Body Radius Multi Angle
SAND-EZE Soft Sander 5" Set Soft Sanders are designed to sand
Groove Sanding Sanding Sanding #KL05245..........$5.95 almost any shape. The kit includes 6
blocks of 3 different consistencies and
Pump Sleeves
Flexibility without sacrificing strength or life is the key to Pump A sanding/buffing machine offers woodworkers the advantage of sanding and buffing
Sleeves from Klingspor’s Woodworking Shop. You instantly
irregular pieces. Everything from cabriole legs and spindles to bowls and other turnings
have the ability to sand contoured parts such as chair arms and
can benefit from sanding and buffing. Metal parts such as hinges, knobs and other hard-
legs, gun stocks, large molding and other fine pieces.
Please measure your drum before ordering and verify what ware can also benefit from buffing. This is an extremely versatile machine that all shops
size you actually need. could benefit from having. Comes with 1/4" to 4" bushings. Arbors are 1" in diameter and
US DELTA 8" long.
Dia. x Width 2" x 9" 3" x 9" 3" x 9" 4" x 9" 6" x 9" 8" x 9" Pump Sleeves
320 Grit PU24658 PU64588 PU80169 PU64589 PU24666 PU64591 JET 1 HP BUFFER Dia. x Width 3" x 6" 4" x 6"
$1.85 2.75 2.75 3.49 4.64 5.95 #J577110 ..................$229.95 320 Grit PU13016 PU13026
220 Grit PU64377 PU22818 PU83926 PU64379 PU64380 PU04893 Freight Charge ..........$20.00 $2.50 3.25
$1.85 2.75 2.75 3.49 4.64 5.95 BUFFER STAND 220 Grit PU13015 PU13025
180 Grit PU66983 PU66984 PU00745 PU66986 PU66988 PU66989 $2.50 3.25
#J577114 ..................$169.95
180 Grit PU13014 PU13024
$1.85 2.75 2.75 3.49 4.64 5.95 JET SOFT COTTON WHEEL $2.50 3.25
120 Grit PU66683 PU66685 PU00746 PU66688 PU66690 PU66692 8"X1/2"X5/8" 120 Grit PU13012 PU13022
$1.85 2.75 2.75 3.49 4.64 5.95 #J575856......................$12.95 $2.50 3.25
100 Grit PU66164 PU66166 PU00747 PU66168 PU66170 PU66171 100 Grit PU13011 PU13021
JET HARD COTTON WHEEL
$1.85 2.75 2.75 3.49 4.64 5.95 $2.50 3.25
80 Grit PU17240 PU65767 PU99097 PU65768 PU17249 PU17250
8"X1/2"X5/8"
80 Grit PU13010 PU13020
$1.85 2.75 2.75 3.49 4.64 5.95 #J575859 ....................$12.95 $2.50 3.25
This is a box cram-packed full of 5 lbs. of garage should have a box of these as well HARSH WINTER HAND
the softest, whitest cloths. They have been as whoever dusts and polishes your furni- SOOTHER LOTION #HW53021 ......$6.95
prewashed so they’re lint-free, clean and ture around the house. Every piece is of a
free of any contaminants. It’s hard to even generous size and can be cut into smaller
call these rags - fine clothing could be
made out of this stuff! You’ll find that apply-
pieces to make the box go even further.
Make your finishing and clean-up as has-
PDE Paint Remover
ing oils, stains, polishes and rubbing lac- sle-free as possible...order your Box of Will Remove Up To 8 Coats Of
quers and varnishes with these cloths will Rags today! Paint With One Dose
be one of the easiest ways to get the finish If you are looking for a paint remover that works,
on your project. Plus, your work will look look no farther than P.D.E.. P.D.E is non-toxic once
BARGAIN BOX OF RAGS 5LBS.
better, feel better and come out like you’ve mixed and is easy to use. Simply mix equal parts
#BC33010..........................$14.95 of PDE and water in a metal container and allow to
always hoped it could. Every shop and
sit for a few minutes. One dose of PDE is good for
Wool-Lube Final Preparation For Wood Finishing ing formula that restores the original color
and luster to the finish while blending out
enough on minor scratches and abrasions
while steel wool may be necessary on more
Wool Lube is a specially formulated lubricant that minor scratches and blemishes. Restor-a- seriously damaged pieces.
prepares furniture before waxing or polishing. Wool finish permanently eliminates white heat No Air Shipments!
Lube can be applied with either steel wool or rings, water marks, scratches, color fade, RESTOR-A-FINISH - 8OZ
wet/dry sandpaper.This is a product that’s excellent oxidation, smoke damage, etc. Restor-a-
Neutral # RF1008......$8.95
for removing pack marks, soiling or finger prints. finish cleans the surface and restores the
finish in one step without removing any of
Maple Pine # RF2008......$8.95
After Wool Lube is applied the piece will be ready to
the existing finish. Golden Oak # RF3008......$8.95
accept its finish. Wool Lube is non-flammable, non-
toxic and water soluble. No Air Shipments! With a simple wipe-on, wipe-off process, Walnut # RF4008......$8.95
most finished wood surfaces that seem to Mahogany # RF5008......$8.95
need a complete refinishing job can be Dark Walnut # RF6008......$8.95
WOOL LUBE #B7301365 ............$8.95 restored in a few minutes. Before stripping Dark Oak # RF7008......$8.95
it, try restoring it. Cherry # RF9008......$8.95
Qualarenu Restore Old, Cracked Finishes
A modern method of renovating an old cracked, or alligator finish, Kramer® Antique Improver
Qualarenu works equally well on old varnish, lacquer, or shellac fin- Kramer’s Antique Improver is the result of years of studies involving
ishes. Qualarenu may be brushed, sprayed, or padded on an old very old wood finishing recipes and formulas. Hand formulated from
surface. Ready to use out of the bottle, Qualarenu is simply 14 all-natural ingredients, this product when wiped on with a soft
brushed on with the grain until the imperfections disappear. cloth, allowed to stand 5 to 15 minutes, then wiped dry, will put more
Qualarenu eliminates the need for restaining and refilling with paste beauty and life back into your fine pieces than you ever thought pos-
wood filler. Before you decide to totally refinish that old piece of fur- sible. Antique Improver restores natural finishes-paint, lacquer, var-
niture, try fixing it with Qualarenu. nish, and shellac. It cleans, brightens and clarifies the finish, and
No Air Shipments!
helps heal checking, hazing, cracking and rebounds the finish.
QUALARENU (PINT) #B61100055 ................$16.95
ANTIQUE IMPROVER #KM00108..............$16.95
Oyster White #MP008 ..$16.95 Clear Coat #MP300 ......$15.95 Try our Trans-Tint Dyes. These are Golden Brown................#HS6002
liquid concentrates that are solu- Reddish Brown..............#HS6003
Salem Red #MP009 ..$16.95 Antique Crackle #MP400 ......$19.95 ble with either water or alcohol. Medium Brown ............#HS6004
Marigold Yellow Extra Bond #MP200 ......$16.95 Each 2 oz. bottle makes 1/2 gallon Dark Walnut....................#HS6005
#MP010 ..........................$16.95 Color Chart of tint dye. Transtint can be added Dark Mission Walnut ....#HS6006
directly to clear finishes, except oil Dark Vintage Maple ......#HS6009
Bayberry Green (FREE w/ Order) #MPCHART....$.99 based finishes, to make toners. Lemon Yellow ................#HS6020
#MP011 ..........................$16.95
Bright Red ......................#HS6021
EACH 2 OZ. BOTTLE MAKES Blue ................................#HS6022
Solar-lux Stains Alcohol Based Wood Stain 1/2 GALLON OF TINT DYE
..................................$15.95 EA.
Black ..............................#HS6023
Green ..............................#HS6028
These stains carry the Behlen “Master” label. Honey Amber ................#HS6001
They are a fast-drying (approximately 1 hour) Orange ............................#HS6025
premixed dye based stains that have a
tremendous degree of fade resistance and
Gel Stain
U.V. protection. Solar-Lux also incorporates Gel Stains are formulated with a combination of pig-
non-grain-raising capabilities with deep pene- ments, oils, and urethanes to produce a durable and
tration and translucency that enhances the beautiful "hand-rubbed" finish. Gel Stains are often
wood grain patterns. They may be added to used on blotchy woods which are difficult to stain
lacquers for a shading and highlighting effect. such as aspen, pine, birch, and maple. These easy-
Solar-Lux can be applied to bare wood with a to-use stains simply wipe on with a cloth or applied
rag, brush or sprayer, however they can only with a foam brush (no spills or splashes).
be applied over an existing finish by spraying. Gel Topcoat may be used to top coat any stain.
No Air Shipments! Although Gel Stains contain urethane, Gel Topcoat
SOLAR-LUX STAIN - PINTS has a higher content of urethane and may be used to
top coat Gel Stains for more protection.
Medium Wheat Blood Red
#B50307A35 ..........$11.95 #B5033A285 ..........$11.95 GEL STAIN- PINT GOLDEN PINE
Dark Green Golden Fruitwood AMERICAN OAK #GF10830 ..................$11.95
#B50308A75 ..........$11.95 #B5034A565 ..........$11.95 #GF10824 ..................$11.95 JAVA
Light Yellow Orange Medium Brown Walnut BROWN MAHOGANY #GF10831 ..................$11.95
#B50309A25 ..........$11.95 #B5036A205 ..........$11.95 #GF10825 ..................$11.95 NEW PINE
Light Brown Mahogany American Walnut CANDELITE #GF10832 ..................$11.95
#GF10826 ..................$11.95 NUTMEG
#B5033A105 ..........$11.95 #B5036A235 ..........$11.95
ANTIQUE WALNUT #GF10833 ..................$11.95
Medium Red Mahogany Brown Nutmeg
#GF10827 ..................$11.95 PRAIRIE WHEAT
#B5033A115 ..........$11.95 #B5036A265 ..........$11.95
COLONIAL MAPLE #GF10834 ..................$11.95
Light Red Mahogany Hickory
#GF10828 ..................$11.95 SATIN TOPCOAT
#B5033A125 ..........$11.95 #B5036A285 ..........$11.95
GEORGIAN CHERRY #GF10835 ..................$11.95
Cordovan Mahogany Cherry #GF10829 ..................$11.95
#B5033A165 ..........$11.95 #B5036A405 ..........$11.95 No Air Shipments!
MOHAWK CLEAR AEROSOLS - 13 OZ Buy 12 of Extra Dark Walnut Van Dyke Walnut
Gloss #M1020410 ......$6.95 #M1000209 ............................$6.95 #M1000353 ............................$6.95
Satin #M1020412 ......$6.95
same for Dark Red Mahogany Natural Cherry #M1000382 ..$6.95
Flat #M1020411 ......$6.95
$5.95 each! #M1000227 ............................$6.95 Dark Red Walnut
Brown Mahogany #M1000383 ............................$6.95
Dead Flat #M1020414 ......$6.95 #M1000229 ............................$6.95 Classic Cherry #M1000408 ..$6.95
Pre-Cat Aerosol Sealer #M1020413 ....................$6.95 Perfect Brown #M1000249....$6.95 Light Golden Oak
Light Natural Oak #M1000415 ............................$6.95
Buy 12 of
#M1000321 ............................$6.95 Classic Walnut #M1007021 ..$6.95 same for
Sanding Sealer $5.95 each!
Tone Finish Clear Lacquer Sanding Sealer fills in and levels sur-
face scratches and burn-in repairs. It’s fast drying, easy sanding Can Gun Jet Spray Handle
and has high solids for rapid build up. Seals in stains prior to final This spray can handle will turn any spray can into a
top coat to help speed up build up. No Air Shipments! spray gun. Spray paints, lubricants, adhesives and
more can all be more easily applied using the Can
MOHAWK CLEAR LACQUER Gun. No more tired, cramped or frozen fingers. The
SANDING SEALER
Buy 12 for ergonomic design allows for even, continuous
#M1020423..........................$6.95 $5.95 each! spraying. The Can Gun provides complete control
over the amount, speed and direction of all aerosols.
Lacquer every time. This gun will yield high out put with low overspray.
This light-weight and durable die cast alloy gun with stain-
Many of our customers build wooden less steel fluid needle and body has a fully adjustable spray
pattern. Model includes air adjustment knob with gauge.
instruments such as mandolins, violins,
guitars and more. If you decide to, don’t HVLP GRAVITY FEED GUN #PC00001 ......$99.95
put in all the time and then make a mis-
take at the finishing point. Behlen’s
Stringed Instrument Lacquer is ideal for STRINGED INSTRUMENT LACQUER
musical instruments. These type of
Quart #B6111406..........$14.95
instruments have to vibrate and move to
produce their certain sound. They need Gallon #B6111407..........$46.95
Fuji Mini Mite
to be finished with a finish that will move BEHLEN VINYL SEALER - Quart 3 System
with the wood. Stringed instrument lac- #B6111706 ............................$11.95
quer is specially formulated to move STRINGED INSTRUMENT LACQUER Fuji recognized that
with the wood and remain somewhat AEROSOL #B1041406 ..........$9.95 although there were
flexible. This lacquer must be applied VINYL SEALER AEROSOL plenty of lower priced
over Behlen’s vinyl sealer.
#B1028000 ..............................$7.95 HVLP turbine systems
No Air Shipments! on the market today,
there were none that combined
29
BUILT-INS
#TP88732..............$19.95
DUST COLLECTION
BASICS BOOK
#WK10500 ..............$7.95 TRIM CARPENTRY SHARPENING SIMPLIFIED
WOODTURNING, TWO VIDEO DVD
BOOKS IN ONE 2ND ED #EE20000 ..................$24.95
#SM65835 ............$19.95 #TP89432..............$19.95 TURNING PENS AND
PENCILS
#SM81006 ............$17.95
SHELVES CABINETS
& BOOKCASES WOODTURNING
THE BOW BUILDER'S BOOK
#TP50493..............$19.95 TURNING BOWLS WITH CHESSMAN
#SF27896 ..................$34.95
RICHARD RAFFAN #FX33737..............$24.95
500 WOOD BOWLS
#TP85084 ..............$24.95
#SM04831 ............$24.95
PRO SITE PROTRACTOR - 12" PRO SITE PROTRACTOR - 7" SCRATCH AWL #SW69122 ..................$5.95
#SE67752 ....................$64.95 #SE11677 ....................$54.95
12" Combination Square
6 Piece Measuring Set Every shop needs a combination square.
You get six essential measuring tools This one will obviously measure 45s and
at a bargain price in this kit. The kit 90s, but it also has other functions. It can be
includes a 6" flat leg divider, 6" flat leg used as both a depth gage and marking
outside caliper, 6" flat leg inside gage. With its built in vial, it functions as a
caliper, 6" angular depth gauge, 6" level. A built in, hardened scriber is also
stainless rule with pocket clip and a 0" included. The square head is zinc die cast
to 4" brass vernier caliper. 6 PIECE MEASURING SET and the blade is satin finished and is gradu- 12" COMBINATION SQUARE
#PA79057 ..............................$24.95 ated in 1/8" and 1/16". #GE81100 ............................$19.95
Tri Scribe measure the distance using the top scale and then
find the same reading on the bottom scale. It’s that
Trammel Compass: Attach these trammel quick.The heavy gauge tape and tough plastic hous-
heads to any rule up to 3/32" thick, 2" wide ing make this tool as durable as it is useful.
with a scribe point at one end and a pencil
CENTERPOINT TAPE 16' #CF97161 ..................................$16.95
at the other for the only flat lying compass
on the market. Tri Scribe is designed to lie
flat on your workpiece, making it inherent-
ly stable, giving you precision and constant
Contour Gauge Easily Duplicate Complicated Profiles
accuracy for arcs and circles. (Diameter Attach to a longer blade try-square/combi- Here’s the speedy simple way to dupli-
only limited by length of rule) nation square to get great depth when cate the profile that doesn’t quite trans-
Marking Gauge – Mortise Gauge – Panel marking panels with the same accuracy late by hand outlining. This 10" dual
Gauge: Adding a single or both Tri Scribe and ease that you mark mortises, tenon, scale gauge has four non-slip surfaces
to your try-square/combination square will rabbets etc. for sure handling. 186-cradled feelers
transform it into a very accurate and stable TRI SCRIBE #MR00004 ......$19.95 surround spindles, trim, and joinery
marking gauge or mortise gauge. ensuring the perfect fit.
TRI BLADE #MR00005 ........$5.95
Point 2 Point 10" CONTOUR GAUGE #GE83700 ....................................$12.95
How do you divide a span of wood - or any
other material - into several equal parts Set Up Gauge Blocks
instantly without the use of calipers, a ruler Gauge blocks are a quick way to many easy
or calculator? Just expand then contract and accurate set ups. Whether checking the
the Point 2 Point to give an instant visual width of dados, bit or blade heights above the
guide to locations. Quickly work out the table or any of a number of settings, these
correct number and position of dowels, between boards or over large areas. blocks make it quick and easy. The set con-
screws, pins, or calculate the maximum Designed for both right and left-handed tains 1/8", 3/16", 1/4", 3/8" and 1/2" blocks.
number of strips that can be cut from a use with a maximum expansion of 2ft. The blocks can be stacked to make other
board. The Point 2 Point has a 4-point accurate measurements.
brass locking mechanism enabling you to POINT 2 POINT
transfer your locked measurements #MR00003 ......................$22.95 4" BRASS SET UP GAUGE BLOCKS 5PC #W9810..........................$14.95
PORTER CABLE 12" DELUXE PORTER CABLE 7° DOVETAIL BENCHDOG PROPLATE STANDARD GROUP 1
PORTER CABLE 7518, 7519, 7538, 7539;
DOVETAIL JIG BIT /PC04212 MILWAUKEE 5625-20; TRITON TRA001
#PC04212 ..................$169.95 #PC43776 ....................$19.95 8-1/4" X 11-3/4" X 1/4" ALUMINUM
PORTER CABLE 11/32" PORTER CABLE 1-1/2" BIT OPENING
STRAIGHT BIT / PC04212 MINI DOVETAIL TEMPLET KIT #BD40120 ............................$59.95
#PC43743 ....................$19.95 #PC04215 ....................$79.95 BENCHDOG PROPLATE LARGE GROUP 1
BOSCH 1619; FREUD FT2000;
DEWALT 625; 8-1/4" X 11-3/4" X 1/4" ALUMINUM
Benchdog Featherboards 1-1/2" BIT OPENING
#BD40123 ............................$59.95
This inlay kit enables you and your router to cut pre- O.D. I.D. G.H.
cise inlays. Whether decorative or structural, an inlay 3/4" 21/32" 7/16"
can add a creative look to any project. 7/16" 11/32" 5/32"
1/2" 13/32" 5/16"
ROUTER INLAY KIT 3/8" 9/32" 5/16"
#FR15000..................................$34.95 51/64" 5/8" 9/16"
ROUTER INLAY KIT & TEMPLATE Includes 5/8" 17/32" 9/16" PC TEMPLATE GUIDE SET
Freud Inlay Kit and Template (shown above) 5/16" 1/4" 5/32" #PC42000................................$39.95
#FF40000 ..................................$42.95 Individual template guides available on www.woodworkingshop.com
CANOE
JOINT BIT
MORTISING BIT DOVETAIL BIT
FLUSH TRIM “V”
GROOVE BIT RABBETING BIT
& BEARING SET
CHAMFER
BIT
LOCK
BOTTOM MITER BIT
TRADITIONAL BEARING FLUSH ROUNDING
BEADING BIT TRIM BIT OVER BIT
SLOT CUTTER
ARBOR DOWN
UP SPIRAL BIT
SPIRAL BIT
2+2 RAISED
MATCHED RAIL PANEL BIT
& STILE SETS
ROUND NOSE
BITS
DOUBLE FLUTE STRAIGHT BITS 04-132 1/2" D X 1" CH ..........................$16.95 12-136 5/8" D X 1" CH ..........................$21.95
Overall Diameter x Carbide Height 04-140 3/4" D X 3/4" CH........................$19.95 12-142 5/8" D X 2" CH ..........................$24.95 TRADITIONAL BEADING BITS
04-100 1/8" D X 3/8" CH........................$13.95 12-100 1/4" D X 3/4" CH ......................$18.95 12-150 23/32" D X 11/4" CH ..................$25.95 80-102 1/8" RADIUS X 9/16" CH ........$29.95
04-102 3/16" D X 1/2" CH ....................$14.95 12-102 1/4" D X 7/8" CH ......................$18.95 12-152 3/4" D X 1" CH ..........................$22.95 80-104 3/16" RADIUS X 11/16" CH ....$34.95
04-104 1/4" D X 1/2" CH........................$14.95 12-106 5/16" D X 1" CH ......................$16.95 12-156 3/4" D X 11/2" CH........................$23.95 80-122 1/8" RADIUS X 9/16" CH ........$31.95
04-106 1/4" D X 3/4" CH........................$15.95 12-108 3/8" D X 1" CH ..........................$17.95 12-172 1" D X 11/4" CH ..........................$26.95 80-124 3/16" RADIUS X 11/16" CH ..$34.95
04-108 1/4" D X 1" CH ..........................$15.95 12-110 3/8" D X 11/4" CH........................$17.95 80-128 9/32" RADIUS X 3/4" CH ........$39.95
04-111 7/32" D X 3/4" CH ....................$14.95 12-116 1/2" D X 1" CH ..........................$17.95 FLUSH TRIM "V" GROOVE BIT 80-130 3/8" RADIUS X 1" CH..............$44.95
04-118 5/16" D X 1" CH ........................$15.95 12-118 1/2" D X 11/4"CH ......................$17.95 48-102 5/8" D X 1" CH ..........................$27.95
04-126 3/8" D X 11/4" CH........................$17.95 12-122 1/2" D X 11/2"CH ........................$19.95 48-112 5/8" D X 1" CH ..........................$28.95 BEADING BITS
04-127 15/32" D X 3/4" CH ..................$19.95 12-130 1/2" D X 21/2" CH........................$29.95 "Leaves a 1/8th" V Groove 36-104 1/8" RADIUS..............................$28.95
RIPPING BLADES
10 X 24 RIP PERMA-SHIELD 10" X 30T GLUE LINE RIP 10X30 TK GLUE LINE RIP - the only thin kerf
10X24T RIP FLAT - For smooth, heavy duty - Thin kerf Heavy Duty ripping blade - heavy duty rip/excellent finish ripping blade that delivers true glass
fast ripping #FR01486 (LM72R010)$59.95 #FR01677 (LU87R010) ..................$44.95 #FR74010 (LM74R010) ..................$69.95 smooth rips every time
#FR75010 (LM75R010) ....................$59.95
10" X 80T ULTIMATE CUT OFF 10" X 80T TK PLYWOOD- Thin kerf
10" X 60T CROSS CUT - 10" X 80 ULTIMATE CUT OFF- THIN KERF - 10" X 50 COMBINATION BLADE - plywood and melamine blade
#FR01060 (LU73M010) ......$64.95 #FR01615 (LU85R010)......$84.95 #FR35619 (LU74R010)..........$69.95 #FR00810 (LU80R010)..........$84.95 #FR04164 (LU79R010) ......$74.95
10" X 40 FUSION COMBO BLADE- 10"X50T PERMA-SHIELD COMBO 10" X 50 COMBINATION BLADE - Thin 10" X 60T COMBO BLADE- long life combo
40 tooth, full kerf combination blade BLADE - Heavy Duty combo blade kerf premium combination blade blade for hardwood or man-made materials
#FR00410 (P410) ................$99.95 #FR01554 (LU84R011) ..........$69.95 #FR00082 (LU82M010) ....................$39.95
#FR00083 (LU83R010) ..........$54.95
LAMINATES / PLYWOOD
DIABLO 7-1/4" X 24 BLADE - Thin kerf DIABLO 7-1/4" X 40 BLADE - Thin kerf
10" X 80T DBL SIDED LAMIN 10" X 80T ONE SIDED LAMIN combination blade combination blade
#FR00097 (LU97R010) ..............$94.95 #FR00098 (LU98R010) ..........$94.99 #FR19091 (D0724A) ........................$9.95 #FR19107 (D0740A) ......................$15.95
KREG SCREW
Forstner Bit Set
Set contains 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1",
ASSORTMENT KIT 11/8", 11/4", 13/8", 11/2", 15/8", 13/4", 17/8", 2" and 21/8".
#KR00020 ......................$29.95
ECONOMY 16 PIECE FORSTNER BIT
SET #FBS-009 ......................$49.95
Screw Extractor Set
Don’t let broken or stripped screws slow you down again. This is
the easiest way to remove broken and stripped screws without
Damaged Screw Remover
damaging the work piece. The kit includes 5 multi-fluted steel No tool box should be without a Damaged Screw Remover Kit. It can
extractors and 5 cobalt drill bits capable of removing screws remove both stripped screws and free spinning screws. The 2 pack of
removers will remove screws from size 6 to size 14. Each bit is double
ranging from 3/32" to 5/8".
ended. One end drills out the head of the screw and the other end is
SCREW EXTRACTOR SET 10PC threaded to dig in when the screw is reversed out.
#GT53105 ................................................................$18.95
DAMAGED SCREW REMOVER #2 & #3
#AC30000..................................$18.95
Pocket Hole Jig
This extruded aluminum frame accepts material
up to 2" thick. Distances between the holes can
Beaver Saw Drill
What first appears to be a 135 degree, split point 1/4"
be adjusted easily from 3/4" to 23/8" on center or
drill bit, is actually a multi-purpose drilling tool. The M2
they can be used separately. Secured either by
High Speed Steel, titanium nitride coated bit also has
clamps or screws, the jig can be used on virtual-
90 sharp cutting teeth along the sides. It is ideal for
ly any work surface. The jig includes a 6" #2
roughing out holes in plywood, wall board and plas-
drive, 3/8" step drill bit, stop collar, hex keys and
tics. Just drill the hole and ream. The drill bit offers
30 self- tapping, pan head screws.
fast, easy drilling, even in steel. This is another great BEAVER SAWDRILL
POCKET HOLE JIG #BH12600....................................................$44.95 tool to have in the shop or the tool box. #BV20000 ................$6.95
DELTA 14" SAW #CBL-001....................$12.95 can be rotated the full 360 degrees. They 3/8" THICKNESS, CENTER HOLE 25/64"
14" BANDSAWS #CBL-003 ..................$12.95 will easily out last most bandsaws. The #SA10002 ............................$19.95
Simply use the block like an eraser, rubbing Pitch & Gum Remover Increase The Life
firmly on the surface. Combined with oil, water And Performance Of Your Cutting Tools
or any cleaning fluid, the results can be even The performance and life of your cutting tools are clearly affected by
pitch and gum build up. Not only does pitch and gum shorten the life
SIZE: 3" x 2" x 3/4" of the cutting tool, but it can leave sloppy cutting edges and burn your
Sandflex Coarse Abraser Block Fine Abraser Block stock. Sprayway® Pitch and Gum Remover is an easy one step solu-
#SA99999 ..........................$3.95 #SA99997 ..........................$3.95 tion to these problems. Simply spray it on the blade, bit or cutter and
wipe it off. It’s that simple. So remember, it pays to keep those expen-
Medium Abraser Block 3 Sandflex Blocks (one of ea. grit)
sive cutting tools at their best. No Air Shipments!
#SA99998 ..........................$3.95 #SA99996 ..........................$9.95
SPRAYWAY® PITCH & GUM REMOVER
Boeshield Metal #SW00836 ..............................$7.95
Protectants
The Resin, Gum & Pitch Remover will keep Pitch RX Belt & Saw Cleaner
your cutting tools like saw blades and router
bits performing to their utmost. This non- Quickly Removes Stubborn Pitch & Gum
toxic, biodegradable formula gently A frequent complaint that we hear from our customers is blade and bit
removes the unwanted build-up quickly and dullness and performance. For increased blade life, cooler operating,
effectively. RUST & STAIN REMOVER cleaner cuts and decreased burns, Pitch Rx can deliver. A non-flamma-
If rust has already become a problem on #TB00008 ......................$9.95 ble, biodegradable, phosphate-free, abrasive-free, no silicone, and non-
some of your tools, Rust Free will remove it BLADE & BIT CLEANER aerosol product, Pitch Rx will remove stubborn pitch that ruins your
without harm to your tools. Also works great
#TB80088 ......................$9.95 blade, bit, and knife-edges. Simply soak blade for just 2-3 minutes. 1-pint
on rust stains on porcelain, concrete or size is economical and effective.
cloth. This is a must-have for every shop.
T-9 WATERPROOF
No Air Shipments! LUBRICANT - AEROSOL BELT & SAW CLEANER #AT16000 ................$13.95
#TB90004 ......................$8.95
Woodworker’s Dry Coat Lube TopCote Have the Smoothest Tool Tops Ever
Use TopCote along with Sandflex blocks to achieve a silky smooth sur-
This dry lubricant forms a thin, low-friction coating that mechanically face on your table saw tops, band saw tables, scroll saw tops, and other
bonds to the surface, providing excellent lubrication under high tempera-
tools. Compared to paste wax, TopCote is 30% slicker and prevents
tures and pressure. 801 reduces friction, inhibits resin build up, and pro-
rust 5 times longer - plus it’s easier to apply. TopCote contains no sili-
longs tool life. This spray contains no silicon or oil and will not affect wood
cone or petroleum so it won’t stain your wood or interfere with glues or
finishes. Use on saw blades, router bits, drill bits and virtually all other cut-
finishes. No Air Shipments!
ters for outstanding lubricating action.
WOODWORKER’S DRY COAT LUBE 5.5 OZ TOPCOTE #BOS1005 .....$10.95
#SW00801 ........................$9.95 No Air Shipments! 10.75 OZ TOPCOTE #BOS1075 .....$14.95
Measuring Tool enables you to keep your hands away from dangerous blades. It
has a comfortable D-handle grip, built in sliding stop and positive
trigger clamping action. It fits standard 3/8" x 3/8" miter slots and
Great for setting up a saw or router.
has positive angle stops at 90 and 45 degrees, both right and
MULTI-USE MEASURING TOOL left. The bar with a stop extends up to 12".
#BH13080 ............................$12.95 CLAMPING MITER GAUGE #WK13230 ............$42.95
Magnetic Featherboards
Magswitch feather boards give you all of the benefits of
traditional feather boards with one major advantage-
complete flexibility. Unlike regular feather boards which
are essentially tied to a miter slot, Magswitch feather
boards can be attached anywhere on the steel table or
fence. They utilize the same 20mm Mag Jig that’s sold
The new Milescraft feather boards works on both table saws and router tables, on the table separately. The Vertical Featherboard attachment can be
top or the fence. It comes with everything need to mount, including 5/8" and 3/4" miter added to keep constant down force on your work piece.
bars. The dual/tandem model can be used as one or taken apart and used individually.
PRO TABLE FEATHERBOARD VERTICAL FEATHERBOARD
FEATHERBOARD FEATHERBOARD DUAL/TANDEM 30MM ATTACHMENT /PRO
#WS14060............................$14.95 #WS14070............................$29.95 #MT10328 ............................$48.95 #MT10339 ............................$12.95
Stock removal
The Advanced Coating Technology (ACT) developed by KLINGSPOR Abrasives is a true synergy between process and prod-
uct. It is a process innovation explicitly geared for the improvement of grain adhesion in coated abrasives. The result is sub-
stantially more abrasive strength with a noticeably longer service life to your abrasive product. Look for the ACT logo to be Time
assured of the longest lasting coated abrasive products on the market today.
Festool
41/2" 5" 5" 5" 6" 6" 6" 5" 6"
Grit 8 holes 8 holes 5 holes No holes No holes 6 holes 8 holes 9 holes 9 holes
400 10 Pack VD98049 VD98019 VD98009 VD98070 VD80108 VD98029 VD80060 VD98100 VD98079
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80059 VD80088 VD80090 VD80111 VD80013 VD80109 VD80111 VD80114 VD80116
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
320 10 Pack VD98048 VD98018 VD98008 VD98069 VD98089 VD98028 VD98038 VD98099 VD98078
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80032 VD80030 VD80031 VD80099 VD80107 VD80041 VD80033 VD80077 VD80085
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
220 10 Pack VD98046 VD98016 VD98006 VD98067 VD98087 VD98026 VD98036 VD98097 VD98077
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80017 VD80005 VD80011 VD80098 VD80106 VD80040 VD80023 VD80076 VD80084
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
180 10 Pack VD98045 VD98015 VD98005 VD98066 VD98086 VD98025 VD98035 VD98096 VD98076
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80046 VD80044 VD80045 VD80097 VD80105 VD80043 VD80047 VD80075 VD80083
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
150 10 Pack VD98044 VD98014 VD98004 VD98065 VD98085 VD98024 VD98034 VD98095 VD98075
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80016 VD80004 VD80010 VD80096 VD80104 VD80039 VD80022 VD80074 VD80082
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
120 10 Pack VD98043 VD98013 VD98003 VD98064 VD98084 VD98023 VD98033 VD98094 VD98074
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80015 VD80003 VD80009 VD80095 VD80103 VD80038 VD80021 VD80073 VD80081
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
100 10 Pack VD98042 VD98012 VD98002 VD98063 VD98083 VD98022 VD98032 VD98093 VD98073
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80014 VD80002 VD80008 VD80094 VD80102 VD80037 VD80020 VD80072 VD80080
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
80 10 Pack VD98041 VD98011 VD98001 VD98062 VD98082 VD98021 VD98031 VD98092 VD98072
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80013 VD80001 VD80007 VD80093 VD80101 VD80036 VD80019 VD80071 VD80079
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
60 10 Pack VD98040 VD98010 VD98000 VD98061 VD98081 VD98020 VD98030 VD98091 VD98071
$6.95 6.95 6.95 6.95 8.95 8.95 8.95 6.95 8.95
50 Pack VD80012 VD80000 VD80006 VD80092 VD80100 VD80035 VD80018 VD80070 VD80078
$24.95 24.95 24.95 24.95 39.95 39.95 39.95 24.95 39.95
C.
B.
A.
BOCOTE KINGWOOD ZEBRAWOOD Use the Pen Mill Kit to square off the end of
#TS20002 ..........$12.95 #TS20006 ..........$19.95 #TS20010 ..........$12.95 the pen blank and tubes prior to final assem-
bly. The kit includes a 3/4" squaring cutter, a
7mm, 8mm, 9mm and 10mm pilot cutter,
BUBINGA OLIVEWOOD
allen wrench and sleeve adaptor.
#TS20003 ............$9.95 #TS20007 ..........$18.95
7 PIECE PILOT PEN MILL
#XR43000..............................$35.95
Carving Knife
These US made Carving knives are the ideal
knives for both novice and veteran alike. The
Flexcut Carvin’ Jack
The Carvin’ Jack is an easy way to keep your whole carving kit with you
price makes them attractive to the beginner
at all times. The pocket-knife-like tool still uses the same spring steel as
and the quality keeps the veteran satisfied.
all the other Flexcut tools and contains six different profiles in one han-
Each knife is made from uniformly hardened
and tempered high carbon cutlery steel and dle just over 4" long. It contains a detail knife, straight gouge, hook
is precision ground. CARVING KNIFE knife, V scorp, gouge scorp and chisel.
WHITTLING KNIFE 17/8" Blade #RM10000 ............$16.95 FLEXCUT CARVIN’ JACK RIGHT HAND
11/2" Blade #RM30000 ..........$9.95 11/2" Blade #RM20000 ............$16.95 #JKN91..........................................................................$109.95
With this Wolverine system, or Flat Tool accessory if you already own the Wolverine
System, you’ll be able to use your 6" or 8" bench grinder to sharpen chisels and
Honing Guide
plane irons up to 2.5". This affordable 2 stage honing guide opens
from 1/8" to 23/4". Knurled and slotted snugs
ACCESSORIES FOR THE COMPLETE SYSTEM (1) Base, up to your plane irons or chisels while gliding
WOLVERINE JIG (1) Arm Support, (1) Support Arm, (1) Honing Jig smoothly across stone or abrasive materials.
(1) Honing Jig #ON3601 ....$87.95 #ON3572 ..........................$109.95 HONING GUIDE #BH19117 ......$14.95
Airpro Face Shield • Tool-free adjustable guard — Quick guard installation and adjustments
• Spindle Lock — For quick wheel changes
The new and improved AirPro Face shield is a TOOL ZONE 41/2" ANGLE GRINDER #TZ10000 ....................................$59.95
fully protected air circulating face shield that’s
ideal for all woodworking applications, even
machining MDF material. Unlike the previous
version, the motor is now positioned away from
the forehead area, reducing noise and vibration.
Wrap-Around Safety Glasses
There is now an attachment area for the option- These top-notch wrap-around glasses
al hearing protection. With new twin filters that offer contemporary styling with out-
are 98% efficient, the AirPro has twice the filter- standing performance. The close-to-
ing strength of the previous model. Not only is
the AirPro a much improved unit, it will run
the-face fit and extreme light weight
longer due to its new 8 hour battery. make these ideal for extended wear.
Features include ANSI Z87.1 approved
AIRPRO FACE SHIELD EAR DEFENDERS(PR)/AIR/PRO impact resistance, economical pricing,
#TD40001..........................$329.95 #TD40004 ............................$44.95 and wrap-around coverage.
VISOR OVERLAY(10PK)/AIR/PRO BATTERY CRADLE/AIR/PRO WRAP-AROUND SAFETY GLASSES #AE13132 ........$4.95
#TD40003 ............................$29.95 #TD40005 ............................$46.95
Wide View Safety Glasses with
Headgear w/ Face Shield LED Light System
With a wide field of vision and integral side
Convenient headgear with faceshield combination is shields, you’ll get excellent protection from
an easy all-in-one way to protect the entire face and
these glasses PLUS the added benefit of two
front portion of the head when flying debris comes
into play – perfect for wood turners! The ratchet extra-bright LED lights. These are excellent for use
adjustment offers the best possible fit. The polycar- in dark work areas and in areas where extra detail
bonate faceshield is simple to detach for quick must be easily seen. Adjustable temples offer the per-
replacement when worn or scratched. fect fit. Features include ANSI Z87.1 approved impact
resistance, bright LED lights with replaceable batteries,
HEAD GEAR WITH FACE SHIELD brow guard, and adjustable temple.
#AE01055 ........................$14.95
REPLACEMENT SHIELD WIDE VIEW W/LED LIGHT SYSTEM #AE13155 ........$12.95
#AE01060 ..........................$8.95
66 industry. Unlike many of their competitors, Supermax Drum Sanders are still manufactured in The United States and
carry a 2 year warranty.
Supermax Drum Sanders are very versatile and will save you time while also giving you better results. Using a coars-
er grit, your glued up panel can go straight from the clamp rack to the sander. Any panel you sand will come out
perfectly dimensioned. Ultra thin stock can also be sanded since the drum can go all the way to the conveyor. Rail
and stile stock can be ganged and placed on edge to clean up any saw marks. If you typically work with highly figured
woods, the Supermax will do what no planer can. It will sand and dimension the wood with absolutely no tear out or
snipe. This has always been a very popular machine for luthiers because of its ability on figured woods as well as its
accuracy. Abrasive planing rough sawn stock is made much easier with ‘SandSmart”. SandSmart electrically moni-
tors the load on the drum(s) and conveyor if necessary and will then resume the initial conveyor speed once load
decreases.
The key benefit of the Supermax Drum Sander line is its ability to give you a perfectly dimensioned, flat piece of
stock that’s free from tear out and snipe. Whatever you may build, you will arrive with a better end product if you
start with perfectly machined stock.
3" 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit 50 Grit 36 Grit 24 Grit
ITEM# PE09366 PE09365 PE09364 PE09363 PE09362 PE09361 PE11448 PE09360 PE09359 PE09358 PE09357 PE09356
58 FEET $34.95 34.95 34.95 34.95 34.95 34.95 34.95 34.95 37.95 39.95 43.95 49.95
ITEM# PE09369 PE09368 PE47862 PE63751 PE62619 PE60474 PE09379 PE54773 PE07953 PE30828 PE03016 PE27258
163 FEET $84.95 84.95 84.95 84.95 84.95 84.95 84.95 84.95 109.95 115.95 126.95 145.95
4" 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit
ITEM# PE09364 PE09363 PE09362 PE09361 PE11448 PE09360 PE09359
58 FEET $44.95 44.95 44.95 44.95 44.95 44.95 48.95
FINE
$29.95 29.95 29.95 29.95 29.95
400 320 220 180 150 120 80 60 50 36 24
150 Grit PE61150 PE66150 PE62150 PE65150 PE67150
Surfacing rough
lumber heavy X X $29.95 29.95 29.95 29.95 29.95
stock removal
Surfacing and 120 Grit PE61120 PE66120 PE62120 PE65120 PE67120
dimensioning
boards
X X X $29.95 29.95 29.95 29.95 29.95
Light 100 Grit PE61100 PE66100 PE62100 PE65100 PE67100
X
MEDIUM
Surfacing
$29.95 29.95 29.95 29.95 29.95
Finish sanding,
minimal stock X X 80 Grit PE61080 PE66080 PE62080 PE65080 PE67080
removal
Finish sanding, $29.95 29.95 29.95 29.95 29.95
no stock removal X
60 Grit PE61060 PE66060 PE62060 PE65060 PE67060
Final finish X X $29.95 29.95 29.95 29.95 29.95
X-COARSE
sanding
36 Grit PE61036 PE66036 PE62036 PE65036 PE67036
READY-TO-CUT ABRASIVES - Cloth ®
$29.95 29.95 29.95 29.95 29.95
The READY-TO-CUT® is an upright box that allows the sandpaper to be reeled
out of a hole on the bottom of the box like a dispenser. Each reel of abrasive Combo PE61000* PE66000** PE62000*** *Includes: 2-36 Grit, 2-80 Grit & 2-120 Grit
**Includes: 1-36 Grit, 2-80 Grit & 1-120 Grit
sandpaper is marked and color coded; simply find the color line that corresponds Pack $29.95 29.95 29.95 ***Includes: 1-36 Grit, 1-80 Grit and 1-120 Grit
with your drum size and cut along the line.
READY-TO-CUT QUANTITIES
READY-TO-CUT Pre-marked Bulk Rolls (A KLINGSPOR Abrasive Product) 36 Grit Abrasive 60 Grit & Finer
Drum Size # of Wraps # of Wraps
36 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit 180 Grit 220 Grit
Aluminum Oxide Cloth PE69036 PE69060 PE69080 PE69100 PE69120 PE69150 PE69180 PE69220 16" (Black) 14 19
22" (Red) 10 14
PRICE $87.95 87.95 87.95 87.95 87.95 87.95 87.95 87.95 25" (Green) 9 12
Alumina Zirconia PE68036 PE68080 PE68120 37" (Blue) 6 8
PRICE $129.95 99.95 99.95
SIZE 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit
ITEM# PR62955 PR50409 PR39004 PR39003 PR38409 PR34872 PR36165 PR35101 PR67582
4 1/2" x 10 Yds. $15.95 $15.95 $15.95 $15.95 $15.95 $15.95 $15.95 $15.95 $15.95
Stearate PSA Rolls An addition to our PSA rolls, this stearate roll will offer you great performance and economy as
well.You’ll save money buying rolls and cutting the sheets for your PSA sheet sanders yourself.You’ll also come up with your own hand sand-
ing devices for this useful sticky-backed material. This is our premium stearate material that consists of our top quality aluminum oxide grains
held to a heavy C-weight paper backing with heat resistant resins and finally coated with our zinc stearate to reduce loading.
SIZE 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit
ITEM# AR33040 AR33032 AR33022 AR33018 AR33015 AR33012 AR33010 AR33008
4 1/2" x 10 Yds. $17.95 $17.95 $17.95 $17.95 $17.95 $17.95 $17.95 $17.95
SIZE 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit
ITEM# AR20271 AR20270 AR20268 AR20267 AR20266AR20265 AR20264 AR20263 AR20262
4 1/2"x 10Yds. $27.95 27.95 27.95 27.95 27.95 27.95 27.95 29.95 31.95
Heavyweight Paper Rolls Heavier Paper Material Extends Oscillating Sheet Sander Use
You won’t find a heavier paper for your oscillat- SIZE 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit
ing sheet sanders than this material from the
Klingspor’s Woodworking Shop. Order a ITEM# PR99386 PR98949 PR00047 PR98762 PR10255 PR99376
roll and cut your own sheets to fit most sheet 4 1/2"x 10Yds. $19.95 19.95 19.95 19.95 19.95 19.95
sander models. Use with the Bosch, Porter- ITEM# PR08482 PR99636 PR32712 PR00924 PR99186 PR01039
Cable, Ryobi or Dewalt 1/4 & 1/2 Sheet 4 1/2" x 25 Yds $33.95 33.95 33.95 33.95 33.95 33.95
Sanders for best results.
1" 1" 11/2" 11/2" 2" 2" 3" 3" 4" 4" 6" 6" 69
600 Grit SR81962 SR47252 SR69568 SR45848 SR48674 SR78172 SR81985 SR99536 SR82003 SR71894 SR45242 SR78982
EXTRA FINE
$4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
400 Grit SR81687 SR00870 SR81713 SR01037 SR81725 SR81721 SR99585 SR99190 SR81754 SR99697 SR81763 SR01061
$4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
Whether you’re a turner, a carver or
320 Grit SR81444 SR00355 SR81473 SR99046 SR81494 SR01046 SR98760 SR01050 SR81529 SR98749 SR02958 SR01060
just need to sand that certain little
$4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
spot, you’ll be raving if you try Shop
Rolls from Klingspor’s 220 Grit SR81171 SR01071 SR81178 SR01072 SR81188 SR01073 SR81192 SR01074 SR01078 SR01075 SR01079 SR01076
Woodworking Shop. This long last- $4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
ing, cloth-backed, aluminum oxide SR81034 SR00353 SR81048 SR99100 SR81059 SR99319 SR81077 SR80178 SR81092 SR98750 SR00709 SR01058
180 Grit
FINE
material from KLINGSPOR is spe- $4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
cially woven to be extremely flexible SR80904 SR99801 SR80910 SR99698 SR80917 SR99885 SR80936 SR99735 SR80942 SR00352 SR80961 SR01057
yet get you through those situations 150 Grit
$4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
when you must fold, crimp and twist
your sandpaper to the desired SR80750 SR99189 SR80762 SR99047 SR80770 SR98752 SR80791 SR99012 SR80804 SR99637 SR98787 SR01056
120 Grit $4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
shape—all without scratching and
possibly ruining your workpiece. SR80637 SR00351 SR80647 SR01035 SR98957 SR99213 SR80671 SR99580 SR99450 SR99695 SR00710 SR01055
MEDIUM
Shop Rolls not recommended for 100 Grit $4.95 10.95 6.95 14.95 8.95 18.95 12.95 27.95 17.95 36.95 25.95 54.95
drum sanding. SR80495 SR80496 SR80505 SR01034 SR80514 SR99699 SR80533 SR99114 SR80547 SR00350 SR80573 SR00925
80 Grit $5.95 11.95 7.95 15.95 9.95 19.95 13.95 28.95 18.95 38.95 27.95 57.95
41/2" Sanding Sleeves for Porter-Cable, Clayton, Delta & Ryobi Oscillating Spindle Sanders
Sleeves Packaged & Priced Per Each
1
/2" x 4 /2"
1
/4"x 4 /2"
3 1
1"x 4 /2"
1
1 /2" x 4 /2"
1 1
2"x 41/2" 3"x 41/2"
150 Grit SS20630 SS20609 SS20614 SS20615 SS20620 SS20621
$1.20 $1.31 $1.38 $1.48 $1.89 $2.10
100 Grit SS20607 SS20610 SS20613 SS20616 SS20619 SS20622
$1.20 $1.31 $1.38 $1.48 $1.89 $2.10
60 Grit SS20606 SS20611 SS20612 SS20617 SS20618 SS20623
$1.20 $1.31 $1.38 $1.48 $1.89 $2.10
Buy the 18 Piece 41/2" Sanding Sleeve Kit & Save Money! 18 pc. Sanding Kit (1 of each size & grit) #SS10000......$23.95
ELECTRIC FILER / SANDER Sanding Pad Pack (3) *concave - hollowed or rounded inward like the inside of a bowl; arched in; curving in.
*convex - curved or rounded like the exterior of a sphere or circle; arched outward.
#WH67800 ....................$58.95 #WH67640 ......................$4.95
Kit Includes: Power Unit, 1 Sander Pad - 220 Grit, Sanding Sheets (12) A. Concave set sizes 1/4", 3/8", 1/2", D. Three piece Concave set 3/4",
Flat Needle File, Round Needle File, Triangle 400 Grit #WH67650 ............$4.95
Needle File and a Half Round Needle File. 5/8" and a thick flat sanding pad 7/8", 1/2" #KL31000 ............$4.95
220 Grit #WH67660 ............$4.95 #KL12000 ............................$4.95 E. Angles set w/30 º, 45 º, 60 º, 90º
NEEDLE FILE 100 Grit #WH67670 ............$4.95
B. Convex set w/sizes 1/4", 3/8", angles #KL71000 ................$4.95
Flat #WH67600 ........$4.95 Sanding Sheets Assortment 1/2", 3/4" and a flat, thin sanding pad Complete set of all
Round #WH67610 ........$4.95 (4 sheets each of 100, 220 & 400 grit) #KL20000 ............................$4.95 #KL50000 ..........................$19.95
#WH67680 ......................$4.95
Triangle #WH67620 ........$4.95 File / Sander Assortment C. Three piece Convex set 3/8",
Half Round #WH67630 ........$4.95 #WH67690 ....................$13.95 7/8",1" #KL21000 ................$4.95
76 who have resisted the lure of the detail sander. The first
of the Proxxon items to be featured in Klingspor’s
Woodworking Shop, the Detail Sander is a small yet
efficient tool for very tight spots, corners, sides, and
normally inaccessible areas. This premium sander uti-
lizes the most popular and most efficient oscillating
motion to give the best possible results. A variable speed PROXXON DETAIL SANDER
control from 3000 oscillations per minute to 10,000 oscil- Packed in a sturdy, plastic case. Complete with
lations per minute lets you select the proper speed for 4 sanding pads, sanding fleece and hard
use on numerous different materials. The actual sanding and soft felt polishers.
This is the most detailed of the detail sanders.The Proxxon Pen area of the Proxxon Detail Sander is smaller than that of
Sander produces 8000, 2.5mm linear strokes per minute. It’s most of the other detail sanders on the market so you’ll be
#PX10000 Reg. ........$119.95
ideal for surfaces, slots and tight corners. It’s an excellent tool able to get into tighter areas, smaller corners, etc.
for model makers, carvers, furniture refinishers and makers REPLACEMENT TRIANGULAR PAD
alike. The tool comes with 8 attachments and 45 pre-cut pieces With the available accessories, the versatility of the #PX38520......................$9.95
of sandpaper. Proxxon Detail Sander will amaze you - add this to your
list of must-haves for your sanding and finishing. PROXXON POLISHING SET POLISHING set accessory contains a non-woven
PROXXON PEN SANDER W/ PROXXON Micromot AC
Delta pad and both a hard and a soft felt pad.This set is ideal for attaining a high-gloss fin-
COMPACT AC 2/S ADAPTER Adapter 5/E ish on steel and for rubbing finishes on wood. #PX28888..................$4.95
(powers 1 tool) KIT #PX38704 ................$49.95 HIGH SPEED STEEL SAW BLADE High speed steel saw blade accessory offers
#PX28000 ................$62.95 PROXXON Micromot AC precision cutting - even into corners. Cuts wood, ceramics, plaster and other materials
Adapter 2/S around the home. 21/2" in diameter. Also fits Fein® Detail Sander
PROXXON 12V PEN #PX38706 ................$22.95 #PX28900 ......................................................................$24.95
SANDER Replacement Attachment
#PX28594 ................$48.95 Angles PX28594 (3 PCS)
Proxxon Triangles - Packaged & Priced in Packs of 10.
#PX28594A ..............$6.95 400 Grit 320 Grit 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit 60 Grit
W/ FULL SIZE ADAPTER 5/E Replacement Attachment ITEM# PX00400 PX00320 PX00220 PX00180 PX00150 PX00120 PX00100 PX00080 PX00060
(powers 3 tools) KIT Straight PX28594 (4 PCS)
#PX28001 ................$89.95 #PX28594S ................$6.95 $4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95
MULTIMASTER WOOD KIT INCLUDES: 1-H&L Sanding Pad, 1-(5 pack) - 60 grit
Sandpaper, 1-(5 pack) - 120 grit Sandpaper, 1-126 Precision E-Cut Blade, 1-127 Standard E-Cut
Blade, 1-151 Universal E-Cut Blade #FE67402 ....................................$127.95
MULTIMASTER TILE KIT INCLUDES: 1-Thin Carbide Blade, 1-Normal Carbide Blade,
1-Carbide Rasp (removes old adhesive - prepares wall surface for new adhesive), 1-Scraper
Blade,1- E-Cut Blade (use to undercut door jambs and counter kicks, makes room for new tile),
1-E-Cut Universal Blade #FE67399 ..................................................$127.95
Shelf Pin Drilling Jig This jig provides a quick and accurate way to
drill shelf pin holes in any project. It precisely
Table Top Fastener Drawer Pull Jig
spaces shelf pin holes 1.25" apart, at either Screw into underside
37mm or 64mm from the edge of your work. of table top to fasten
By indexing the jig with a shelf pin, any length the apron of tables to
may be drilled. The shelf drilling jig comes with the top. Sold in packs
a 1/4" self centering drill bit. of 10.
SHELF PIN DRILLING JIG .75" TABLE TOP
#BH19651 ........................$24.95 FASTENERS 10 PK
5MM #BH19139..............$9.95 #SL20000...............$2.95 This easy to use jig enables you to quickly
1/4" #BH19138..............$9.95 and accurately locate the drilling holes for
drawer pulls. Mark center line, choose boring
FIGURE 8 DESKTOP CLIP width needed and position wooden guide for
Concealed Hinge Boring Tool (10PK)
correct spacing and lock. Align over center
line and mark holes. Remove jig and drill.
This one jig allows you to drill the holes for both the hinge and #SL20001 ............$2.99
the mounting plate for all brands of European hinges. All you’ll
DRAWER PULL JIG
need is a 13/8" forstner bit and a #5 hinge bit. The distance from #BH19650 ......................$12.95
the door edge to the hinge hole is adjustable and easily repeat-
able. A built in V-shaped center mark enables you to put the
hinge hole exactly where you want it. Made of high impact poly-
FULL EXT DRAWER SLIDE/PAIR
carbonate, the jig will last for years even under frequent use. 12" #WY10062 ....................$9.95
CONCEALED HINGE BORING TOOL
Drawer Slides 16" #WY10015 ..................$10.95
#EUR-014 ..............................$8.95 18" #WY10016 ..................$11.95
13/8" FORSTNER BIT 20" #WY10017 ..................$12.95
#FB-010................................$15.95 24" #SL20123....................$14.95
#5 HINGE BIT #PA79141 ......$8.95 22" #SL20124....................$13.95
Drawer Guide Jig Our side mounted, telescopic, full extension
drawer slides carry heavy loads smoothly SELF CLOSING FULL EXT DRAWER
The drawer guide jig will work with regular or full extension slides.You and silently with the help of double ball SLIDE
simply adjust the sliding drill guides to where they match up with the bearing raceways.With a 100 lb rated on an 14" #SL30914....................$10.95
holes on the drawer slide. Put the guide in the cabinet, using the cen- 18" size, this rust resistant, nickel plated
ter-line to match up to your reference mark, and drill your pilot holes. 16" #SL30916....................$12.95
steel slide incorporates a positive “anti
All marks will be 90 degrees to the cabinet edge. This durable poly- bounce back” when closed. The slides
18" #SL30918....................$13.95
carbonate jig offers repeatable accuracy and a very affordable price. 20" #SL30920....................$14.95
measure 1/2" thin and 13/4" high.
DRAWER GUIDE JIG #EUR-015............$9.95 22" #SL30922....................$15.95
Ball Bearing Rollers 12" Drill Extension Use with Sanding Mops,
Ball Bearing Rollers can be used in many Foam sanding pads, or
places in the shop. They can be used to Mushroom Buffs for get-
make outfeed tables behind your table saw, ting to hard to reach
planer or bandsaw. Any place where you typ- areas. - Great for
ically move lumber, sheet goods or product Woodturners
can benefit from the Ball Bearing Rollers.
Unlike many roller stands, the ballbearings 12" EXTENSION 6" FORSTNER BIT EXTENDER
can move in all directions. Assembly lines, fin- 1/4" Shanks #CY36212 ..........$9.95 3/8" Shanks #FF16000........$12.95
ishing tables and work surfaces can easily be BALL BEARING ROLLER 5/8"
covered with ballbearings allowing anything
to be moved effortlessly in any direction.
(6 PACK) #BH19100K..........$22.95 Magnetic Tool Bar
Spaceballs No more rattling panels!
As everyone knows, solid wood frame and panel furniture and doors have to be built with
expansion and contraction in mind. If you don’t, the wood will, more than likely, crack.
SpaceBalls are made of rubber and slightly larger than the 1/4" groove they fit into for a
snug friction fit. Simply size your panel smaller on all sides by 1/8" and insert the
SpaceBalls in the This is a fast and easy way to store your tools. MAGNETIC TOOL BAR
groove. After assembly, The 24" magnetic tool bar securely holds a wide
variety of tools from turning and carving to
13" #MS10000 ............$14.95
your panels will be auto-
matically centered in the screwdrivers and hammers. 24" #MS20000 ............$18.95
frame and will be free to
expand and contract
with the seasons. Plus, Rare Earth Magnet
when your panels are at You can’t believe the strength of these magnets until
their smallest, they will
SPACEBALLS 100 PACK
you actually have them in your hand. Each of these
not rattle. #RO10000 ............................$4.95
two magnets have several pounds of holding strength.
BUY 5 OR MORE ..........$3.95 EA They are like a refrigerator magnet on steroids. They
have so many uses. Use them to hold wrenches on
12 Piece Nylon Brush Set the cabinet of a machine, hold keys in secret places,
These nylon brushes are great for clean- chuck keys on drill presses, not to mention using them
ing deep crevices and hard to reach cor- to hold cabinet doors closed by recessing them in the
back of the face frame. The uses are endless.
ners. They are soft enough not to scratch RARE EARTH MAGNET 5PK
most surfaces while still stiff enough to 1" RARE EARTH MAGNET 3/8" #MS90005 ..............$5.95
effectively remove grit and grime.They are #MS90003 ......................$4.49 1/2" #MS90006................$9.95
very handy when restoring furniture.
The Pony line of hand saws use Fineline Technology that provides 3 diamond ground cut- DOUBLE FINE SAW 81/2" 23 & 18 TPI Replacement Double
ting edges on each tooth as opposed to the typical hard point. Induction hardened teeth 23 PT & 18 PT #S102450 ......$27.95 Blade #S012450......................$18.95
provide up to 5 times more cutting life. The Western Style saw has 8 tpi and can be used
on wood, MDF and plasterboard requiring coarse cuts. For dovetails and miter box appli-
cations, the Back Saw with 12tpi is the perfect fit. Both saws cut on both the push and Flushcut Saw
pull stroke.
BACK SAW 12" 12TPI HAND SAW 22" 7TPI/8PPI VERITAS DOUBLE
#ACC66012 ....................$9.95 #ACC66221 ..................$16.95 FLUSH CUT SAW
#VT53601 ................$25.95
Glue Injector Forces Glue into Tight Spots Glue Spreader Take The Mess Out of Spreading Glue
Need to get some glue into a tight spot? With this device
you’ll be able to “squeeze” and force glue right where you covered with glue and no more messy bot-
need it. It’s built like a heavy-duty syringe that offers maxi- tles laying around your shop - just this con-
mum pressure to “push” glue in to the tiniest of spaces. venient, timesaving device. Your glue can
Perfect for repairs and restoration work. even be stored in this bottle because it has a
plug that keeps it just as fresh as if it were in
GLUE INJECTOR #BH19405 ............$29.95 the original bottle. Another plus is it saves
glue and MONEY!
Are you tired of using your level and C clamps to make a cutting
straight edge? The All in One Edge Clamp will make the process
faster, easier and more accurate. Made from extruded aluminum,
the clamps are durable and rigid. They have a built in T track on
their top which lends them to use with any number of shop made
jigs. The regular clamps are 13/4" wide and the 54" Ultra measures
33/4" in width making it a much more durable and heavy duty clamp.
These Parallel Clamps from Jet features Maybe the handiest feature on the clamp ALL IN ONE SINGLE CLAMP
their exclusive design that provides preci- is the built in measuring scale on the bar.
12.5" #ET12000..........$26.95 36.5" #ET36000..........$34.95
sion and power with exact 90 degree This helps you get the clamps as close as
clamping up to 1000 lbs of pressure. All possible to the desired position without 24.5" #ET24000..........$29.95 50.5" #ET50000..........$39.95
necessary clamping pressure is easily any guess work. Other features include a
applied using the ergonomic, Sumogrip reversing head, moveable rail stand/end ALL IN ONE ULTRA CLAMP 54.5" #ET54000 ........$69.95
handles. They make tightening the stops and non marring jaw faces. After ROUTER PLATE XRP #ET10000 ........................$24.95
clamps effortless. When it’s time to using these clamps, you’ll see why they STOP BLOCK XSB #ET11000 ........................$14.95
release the clamp, it has a trigger that have become so popular.
allows you to easily slide the clamp apart.
SAW PLATE XSP #ET11001 ...................... $24.95
JET PARALLEL CLAMPS
1 2+ SHOP ONLINE FOR OUR FULL LINE OF PRODUCTS
12" #J70412 ..........$33.95 ........$29.95 WWW.WOODWORKINGSHOP.COM
24" #J70424 ..........$38.95 ........$34.95
31" #J70431 ..........$43.95 ........$38.95
40" #J70440 ..........$47.95 ........$39.95 23' Strap Clamp
50" #J70450 ..........$51.95 ........$40.95 The Bessey variable angle strap clamp has two dis-
JET FRAMING BLOCK SET - 4 PK tinguishing features that separate it from other gener-
#J70401 ..................................$15.95 ic strap clamps. First, the geared winder simultane-
JET BENCH DOG SET - 2 PK ously tightens both sides of the strap. Secondly, the
#J70402 ....................................$8.95 built-in rewinding mechanism keeps the strap
rolled up and out of the way. The 4 clamp pads
Picture Frame Clamp that come with the strap clamp can handle any
angle from 60 to 180 degrees.
This self squaring adjustable four corner clamp will 23' STRAP CLAMP
clamp frames from 5" x 7" up to 26" x 30". All 4 clamp #AC05569 ....................$42.95
pads are reversible to allow either gluing or nailing.
PICTURE FRAME CLAMP
#BH19635 ..................................$29.95 15' Band Clamp
Toggle Clamps The small, lightweight band clamp features a 15’
x 1" high-strength nylon webbing, 1000 lb test,
which enables the perimeter clamping of irregu-
lar shaped items. Positive hold is afforded by the
self locking aluminum cam which also allows
C. E. F. instant release. The band clamp comes with 4
steel corners to help protect the nylon band from
sharp corners.
15' BAND CLAMP #ACC1215 ..................................$16.95
Stanley Planes World Renowned and Time Tested Spokeshave Flat Base
The old, reliable spoke shave is
The Bailey brand has been a premiere name in hand
still the preferred tool for shaping
planes for over a century. These planes are
and smoothing irregular and
still manufactured to the high standards
curved surfaces. Any type of
that made them the preferred tool
woodworkers through the years. freehand contour work is still
Each piece is accurately ground for a best done with a spoke shave.
perfect fit and precision alignment of Made of iron and with two fine blade should be kept at a 25 degree angle. The
BAILEY #4 SMOOTH PLANE adjustment screws, the spoke overall tool length is 10".
the blade. The steel irons can easily be
2" X 93/4" #SW12904..................$59.95
BAILEY #5 BENCH PLANE
honed to a razor sharp long lasting edge. shave is sure to be a durable SPOKESHAVE FLAT BASE
that’s a pleasure to use. The 2" #SW12951 ..................................$26.95
2" X 14" #SW12905 ..................$56.95 LOW ANGLE BLOCK PLANE
BAILEY BLOCK PLANE 13/8" X 61/4" (Shown)
15/8" X 61/4" #SW12920 ..............$44.95 #SW12960 ..................................$42.95 Variable Burnisher w/Scraper
Dial in the Perfect Burnishing Angle
Slickplane Forget The Router For An Easy Radius Or Chamfer Cabinet scrapers are among the most useful tools in
The handy Slickplane produces an exceptionally the shop. Many woodworkers, however, have a difficult
smooth 1/8" radius or 45 degree chamfer over the time putting the optimum hook on the scraper. The
entire length of an edge. The brass sole glides easily biggest problem is determining the best angle and
along the edge as two independently adjustable, car- then holding the burnisher at that desired angle. This
bide tipped cutters apply the finishing touch. This is a variable burnisher uses a carbide rod that adjusts
great tool to have around when you don’t feel like get- from 0 to 15 degrees. An adjusting knob adjusts and
ting out the router. Comes standard with radius blade. holds the carbide bar at the desired angle.
SLICKPLANE Radius Blade Set Chamfer Blade Set VARIABLE BURNISHER W/SCRAPER #VT53701......................$34.95
#WK11000 ......$17.95 #WK11010 ........$8.95 #WK11020 ........$8.95
Scraper Burnisher speed steel burnisher and the scraper is
ready to go. The overall length of the scraper
Handled Scrapers Removes Glue, Paint, Varnish, Etc. is 11 inches with the shaft measur-
Some types of lumber are best finished with a ing 3/8" by 51/2"
triangle shaped blade giving three sharp scraper, and a finely tuned scraper can finish
edges and can be outfitted with 3 new dif- the wood better than anything else. Burled,
ferent shapes for detail work. Both scrap- curled and any other highly figured woods get
ers have an aluminum diecast blade the smoothest when they are scraped.
A few strokes with the high
holder and a molded plastic handle. #CN00377 ........................$22.95
2.5" HEAVY DUTY SCRAPER
(Model # 665) Veritas Scraper Holder
#SK66500 ..........................$29.95 Save Your Hands and Get the Perfect “Angle”
One tool that should be standard in all work- 2.5" Replacement Blades market, has made this aspect of scraper
shops is the scraper. The Sandvik scraper is #SK45100 ..............................$10.95 usage almost foolproof. The scraper
no ordinary scraper. Having a blade made of 1" MINI SCRAPER (Model #625) with mounts in the “holder/handle” and you tight-
Tungsten Carbide, the scraper stays sharp Holster #SK62500 ..................$19.95 en the center screw to “bend” the scraper to
50 times longer than conventional metal 1" Replacement Blades its most effective angle.The Veritas Scraper
blades. These carbide blades allow the Holder also takes the pressure off of your
#SK44900 ................................$8.95
scraper to be used on a variety of surfaces fingers and hands so getting the advan-
to remove glue, paint, varnish, rust or even
Pear Shaped Blade (Model #625)
#SK62510 ................................$8.95 tages of a scraper doesn’t have to be
bare wood. Both scrapers have blades Anyone who has ever worked with a
Round Shaped Blade painful. If it sounds simple, it is! So order
which are slightly curved on the edges to scraper knows that getting the correct
(Model #625) #SK62520..........$8.95 yours today. Includes blade.
prevent leaving gouges on the outside of “bend angle” is critical to the overall per-
your stroke. The 2.5" model has a reversible Drop Shaped Blade (Model #625) formance of the tool. Veritas, one of the VERITAS SCRAPER HOLDER
blade giving you two edges and the 1" has a #SK62530 ................................$8.95 most respected names in the woodworking
#VT53301 ......................$42.95
Certificate!
90 ________________ ________________
P.O. Box 3737, Hickory, North Carolina 28603-3737
PAGE # QUANTITY ITEM NUMBER DESCRIPTION SIZE GRIT UNIT PRICE EXTENDED PRICE
Privacy Policy
Standard Time). Orders may be placed 24 Hours A Day, 7 Days A Week. DISC SANDING Scribers ......................................30 Roller Stand................................84
Lightweight Discs ......................46 Combination Square ..................30 Edge Trimmer ............................84
Stearate AO Discs......................47 Measuring Tape..........................31 Roller ..........................................84
Heavy Paper Discs ....................48 Digital Fractional Caliper............31 Veneer Softener ........................84
Occasionally we make portions of our customer list available to carefully screened AZ-Plus ......................................48 Dovetail Saw ..............................84
companies that offer products and services we believe you may enjoy. If you do KLINGSPOR Gold ....................49 METAL/TOOL PROTECTANTS Gorilla Tape ................................84
PSA Discs & Disc Rolls ............50 Sandflex Blocks..........................43
not want to receive those offers and/or information, please let us know by contact- Cloth Discs ................................50 Bullfrog Rust Remover ..............43 SLEEVE SANDING
ing us in writing at: Klingspor Corporation, PO Box 5069, Hickory, NC 28603- Discs for Lathe Sanding ............51 TopCote ......................................43 Rotary Shaper ............................70
5069. Additionally, if you decide you no longer wish to receive our catalog, send Sponge Pads..............................52 Robo Sander ..............................70
your mailing label with your request to: Klingspor Corporation Mail List, P O Scalloped Discs..........................52 POWER GRINDING Spindle Sander ..........................70
Flapdiscs ....................................63 Quick Lock Sanding Drums ......71
Box 5069, Hickory, NC 28603-5069. If you would like to receive our catalog less DRILLING Carving Kits ................................63 Mini Size Sanding Drum Kit ......71
frequently, let us know by sending us your mailing label with your request to: Plug Cutters................................39 Power Wheels ............................63 Sanding Sleeves ........................71
KEY CODE
CUSTOMER NUMBER
http://klingsporswoodworkingshop.blogspot.com/
Get more information on woodworking.
Watch videos and learn!
http://klingsporextra.blogspot.com/
Stay up to date. Learn about past shows.
Join us - share your comments.
http://twitter.com/Woodworkingshop
Follow us! Stay up to date.