You are on page 1of 2

DESIGN OF A SLAB SECTION FOR A KNOWN MOMENT

For 1 m wide strip

Operate the Yellow Cells


Sl No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Grade of Concrete (fck) Grade of Steel (fy) Item

A. Design for Flexure

Factored moment (Mu)


Effective Depth Required for Balanced Section Effective Depth Provided (d) Overall Depth Provided (D) Area of Steel Required (Ast) Diameter of Main Bars Used Spacing of Main Bars Required Maximum Spacing Permitted for Main Steel [300mm or 3*d, whichever is less] Area of Distribution Steel Required, if One-way Slab [0.15% for MS Bars & 0.12% for HYSD Bars] Diameter of Distribution Bars Used Spacing of Distribution Bars Required Maximum Spacing Permitted for Distribution Steel [450mm or 5*d, whichever is less] Spacing of Main Bars Actually Provided [At Shorter Mid Span for Four Sides Supported Slab and at Fixed End for Cantilever Slab] Area of Steel Provided Service Stress in Steel (fs) Modification Factor [ As per Fig. 4 of IS 456 : 2000 ] Span of the Slab [Shorter for Two-way Slab] (L) Support Condition of the Slab Basic (L/d) Ratio Maximum Permissible (L/d) Ratio for Deflection Control (L/d)Provided

B. Deflection Control by Limiting Span to Effective Depth Ratio [Cl: 23.2 & 24.1 of IS 456 : 2000
15 16 17 18 19 20 21 22 23 24

Deflection Criterion Satisfied

MOMENT
Value 20 415 18.36 82 140 160 385 10 204 300 192 8 262 450 Unit N/mm2 N/mm2 kNm mm mm mm mm2 mm mm mm mm2 mm mm mm

l: 23.2 & 24.1 of IS 456 : 2000]


200 393 236 1.56 4.14
Simply Supported

mm mm2 N/mm2 metre

20 31.2 29.57

<=(L/d)max

You might also like