Professional Documents
Culture Documents
Description Pump Housing Front Cover Rotor Drive Shaft Port Flange Mounting Frame Torque Arm Bearing Shaft Seal Lubricant Hose Weight
Material Cast Iron (GG25) Carbon Steel with Plexiglass Inspection Window Cast Iron (GG25) EN24T Steel 304 Stainless Steel slotted design fits to DIN PN16, ANSI 150# & JIS10K Insert Options: 316 Stainless Steel, Polypropylene or P.V.D.F Insert Carbon Steel Carbon Steel Bearing Steel Viton Option: PTFE Verderlube - Glycerine based lubricant Verdersil - Silicone based lubricant Natural Rubber (NR) Options: Nitrile Buna Rubber (NBR), Hypalon (CSM) and Verderprene Complete pump excluding drive: 19 kg
210
91.5
389
91.5
133
31.5
116 222
All dimensions are in mm. All dimensions and weights are for guidance only.
54
112
Verderflex Dura 5
Standard Pump Options for 50Hz Motor Fitted With Worm Gearbox, Suitable for Inverter Duty
Flow l/hr 4 8 11 15 18 23 Pump Speed RPM 11 23 35 47 56 70 Installed Motor Power kW 0.15 0.18 0.25 0.37 0.37 0.55 Max Turndown at 5 Bar discharge pressure 3:1 3:1 10:1 10:1 5:1 3:1
0.30
8 Bar
Pumphead Absorbed Power (kW)
5 Bar 0 Bar
Product temperature limitations (C)
35 40 45 50
10 5
20
30 10
Intermittent use
max. 1 hour running min. 1 hour stopped
40 15
50
60 20
70 22.5
VF_Techno_Rev01_2013_(eu)_Dura
Continuous use
(HP) High Pressure Rotor
Intermittent use
(HP) High Pressure Rotor
Flows are typical and were measured with water at 20C with no suction lift or discharge pressure. Actual flows will vary according to suction conditions, discharge pressure and normal component production tolerances.