Professional Documents
Culture Documents
com/speckled-rhombus-bracelet-instructions/
In this video you will learn how to make the a Speckled Rhombus Bracelet (a Beginner level design). To make this bracelet you will need:
Its a good idea to have the supplies ready before you begin and get ready to continue with this guide.
Start from the center pin and place the first A band to the left. Back from the center pin, place another A band forward to the next center pin. Place a C band from the pin on the left towards the pin on the center; from that same left pin, place a B band forward up to the next left pin. Now, from the center pin place a B band to the following left pin, remember to check the diagram to understand the triangle structure we are aiming for. From the second left pin, you will place two A bands, one towards the center and the other one towards the the next left pin. Finally place two B bands from the third center pin and third left pin to the last (fourth) center pin. Now repeat this pattern until the end of the Loom. Place a twisted band on the last pin.
Start from the center pin and grab the top B band in order to loop it to the next center pin, do the same for the pin on the right. Go to the right pin and loop the C band to the center. From the center pin, loop an A band to the side. Dont forget to loop the A band on the first right pin forward as well. From the second right pin, loop two B bands, one to the center pin and one up to the next right pin. Loop the C band on the third center pin towards the right. Loop the A bands on the third center and right pins towards the last center pin. Now repeat for the rest of the Loom.