Professional Documents
Culture Documents
T-Anchor
Installation
The T-Anchor is a heavy duty toggle anchor that has many advantages over toggle bolts. The T-Anchor is made of hardened steel and is plated with zinc-dichromate over zinc which is more corrosion resistant than the standard zinc plating on toggle bolts.
BENEFITS: Stronger than toggle bolts High pullout strength Can be used in walls or ceilings Works equally well in concrete, masonry, steel or wood
Part Number* 20A-4E01 20A-4E02 20A-4E03 20A-4E04 20A-4E05 20A-4E06 20A-4E07 20A-4E08 20A-4E09 Anchor Size 1/4" x 1-3/4" 1/4" x 2-1/2" 1/4" x 3-1/4" 5/16" x 2-1/2" 5/16" x 3-1/4" 5/16" x 3-3/4" 3/8" x 3-1/4" 3/8" x 3-3/4" 3/8" x 4" Hole Size 1/4" Clearanc Past Hole 1" Min. Grip 1/2" Max. Grip 3/4" 1-1/2" 2-1/4" 1-5/8" 2-3/8" 2-7/8" 1-13/16 2-5/16" 3-1/16" Test Data* Pullout Shear (lbs.) (lbs.) 700 1,500 Threa Lengt 1" 1-3/4" 2-1/2" 1-5/8" 2-3/8" 2-7/8" 2-1/4" 2-3/4" 3-1/2" Std. Box 100
washer attached.
5/16"
1-1/4"
9/16"
900
2,300
3/8"
1-1/2"
5/8"
1,000
3,000
50
*Test data shown is based on ultimate values. Use four to one safety factor. Critical applications (vibratory
loads, overhead installations, etc.) may require safety factor of as much as 10 to 1 or more.
Completed Installation
Use in: Tile, metal and plaster ceilings Use with: No other fastener needed Made of: Steel - zinc plated Designed for remodeling work Used for suspension of acoustical ceiling Complete with spade end, washer and hex nut
Part Number 20A-3S03 20A-3S04 20A-3S05 20A-3S10 20A-3S11 Washer Number 20A-3T03 Size* 1/4"-20 x 3" 1/4"-20 x 4" 1/4"-20 x 5" 1/4"-20 x 4" King 1/4"-20 x 5" King Washer Size 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" Std. Box/Ctn 50/500 50/500 50/500 200 200
20A-3T10
*See pg.