Professional Documents
Culture Documents
Value 2.2 20 2
Fixed Constants Gear Symbol Value Pinion Symbol Value Pressure Angle in degrees = 20 = 20
Outputs Diametral Pitch Base Diameter in inches Root Diameter in inches Whole Depth in inches Addendum in inches Dedendum in inches Auxiliary Angle in degrees Interval of Contact in inches Roll Angle at Theoretical Limit Radius in Degrees Theoretical Limit Radius in inches Form Diameter in inches Circular Tooth Thickness in inches Fillet Radius in inches
Gear Symbol P= DbG= DRG= htG= aG= bG= AG= uG= lG= rlG= dfG= t= rfG=
Value 10.0000 2.8191 2.7560 0.2220 0.1000 0.0220 31.3213 0.2298 11.3616 1.4377 2.8753 0.1571 0.0300
All formulas are from the Boston Gear Values in formulas that have bars around t pinion value if you are calculating for the g versa
Pinion Symbol P= DbP= DRP= htP= aP= bP= AP= uP= lP= rlP= dfP= t= rfP=
Value 10.0000 1.8794 1.7560 0.2220 0.1000 0.0220 28.2414 0.2441 5.9508 0.9448 1.8846 0.1571 0.0300
Formula N/D Dcos Do-2ht 2.2/P + .002 1/P ht - 2a cos-1((|Db|/2)/((|D|/2)+|a|)) ((|D|/2)+a)*sin(A)-(|D|/2)*sin() tan-1(((D/2)sin() - u)/(Db/2)) (Db/2)/cos(l) 2(rl - .025*(.025/P)) Pi/2*P .3/P
om the Boston Gear Catalog t have bars around them use the calculating for the gear and vice versa
Parameter Gear Symbol Number of Teeth NG= Diametral Pitch Pd= Shaft Angle (in degrees) = Is There a Full Set of Inputs? Yes
Value 31 12 90
Fixed Constants Gear Symbol Value Pinion Symbol Value Pressure Angle (in Degrees) = 20 = 20
ng and
Outputs
Gear Symbol Value mG= 2.516 Ratio DG= 6.500 = 68.325 Ao= 3.497 F= 0.833 m90= 2.516 hk= 0.167 aoG= 0.051 ht= 0.184 boG= 0.133 G= 2.182 o= 69.451 DoG= 6.538 XoG= 1.244 p= 0.262 R= 66.143 No Symbol 3.497
Pinion Symbol Value mG= 2.516 DP= 2.583 = 21.675 Ao= 3.497 F= 0.833 m90= 2.516 hk= 0.167 aoP= 0.116 ht= 0.184 boP= 0.069 P= 1.126 o= 23.857 DoP= 2.798 XoP= 3.207 p= 0.262 R= 20.549 No Symbol 3.497
Pitch Diameter Pitch Angle (in degrees) Outer Cone Distance Face Width Equivalent 90 Ratio Working Depth Addendum (at heel of tooth) Whole Depth Dedendum (at heel of tooth) Dedendum Angle (In Degrees) Face Angle (in Degrees) Outside Diameter Pitch Cone Apex to Crown Circular Pitch Root Angle (in Degrees) Back-Angle Distance
Formulas mG=NG/NP DG=NG/Pd and DP=NP/Pd =- and If =90: =tan (NG/NP) If <90: =tan (sin()/(mG+cos()) If >90: =tan (sin(180-)/(mG-cos(180-))) If =90: Ao=1/2(DP2+DG2)1/2, If 90: Ao=DG/(2*sin()) F=Ao/3 or F=10/Pd (use the smaller value) If =90: m90=mG, If 90: m90=(mG(cos()/cos()))1/2 hk=2.0/Pd aoG=(.54/Pd)+(.460/Pd*m902) and aoP=hk-aoG ht=2.188/Pd+.002 boG=ht-aoG and boP=ht-aoP G=tan (boG/Ao) and P=tan (boP/Ao) o=+G and o=+P DoG=DG+2aoG*cos() and DoP=DP+2aoP*cos() If =90: XoG=DP/2-aoG*sin() and XoP=DG/2-aoP*sin(), If 90: XoG=Ao*cos()-aoG*sin() and XoP=Ao*cos()-aoP*sin() p=/Pd R=-G and R=-P Back-Angle Distance = Ao
-1 -1 -1 -1 -1
mG-cos(180-)))
s()-aoP*sin()
Parameter Gear Symbol Number of Teeth NG= Diametral Pitch Pd= Shaft Angle (in degrees) = Is There a Full Set of Inputs? Yes
Value 31 12 90
Fixed Constants Gear Symbol Value Pinion Symbol Value Pressure Angle (in Degrees) = 20 = 20
Outputs
Gear Symbol Value mG= 2.516 Ratio DG= 6.500 = 68.325 Ao= 3.497 F= 0.833 m90= 2.516 hk= 0.142 aoG= 0.043 ht= 0.157 boG= 0.114 G= 1.865 o= 69.294 DoG= 6.532 XoG= 1.251 p= 0.262 R= 66.461 No Symbol 3.497
Pinion Symbol Value mG= 2.516 DP= 2.583 = 21.675 Ao= 3.497 F= 0.833 m90= 2.516 hk= 0.142 aoP= 0.098 ht= 0.157 boP= 0.059 P= 0.969 o= 23.539 DoP= 2.766 XoP= 3.214 p= 0.262 R= 20.706 No Symbol 3.497
Pitch Diameter Pitch Angle (in degrees) Outer Cone Distance Face Width Equivalent 90 Ratio Working Depth Addendum (at heel of tooth) Whole Depth Dedendum (at heel of tooth) Dedendum Angle (In Degrees) Face Angle (in Degrees) Outside Diameter Pitch Cone Apex to Crown Circular Pitch Root Angle (in Degrees) Back-Angle Distance
Formulas mG=NG/NP DG=NG/Pd and DP=NP/Pd =- and If =90: =tan (NG/NP) If <90: =tan (sin()/(mG+cos()) If >90: =tan (sin(180-)/(mG-cos(180-))) If =90: Ao=1/2(DP2+DG2)1/2, If 90: Ao=DG/(2*sin()) F=Ao/3 or F=10/Pd (use the smaller value) If =90: m90=mG, If 90: m90=(mG(cos()/cos()))1/2 hk=1.70/Pd aoG=(.46/Pd)+(.390/Pd*mG2) and aoP=hk-aoG ht=1.888/Pd boG=ht-aoG and boP=ht-aoP G=tan (boG/Ao) and P=tan (boP/Ao) o=+G and o=+P DoG=DG+2aoG*cos() and DoP=DP+2aoP*cos() If =90: XoG=DP/2-aoG*sin() and XoP=DG/2-aoP*sin(), If 90: XoG=Ao*cos()-aoG*sin() and XoP=Ao*cos()-aoP*sin() p=/Pd R=-G and R=-P Back-Angle Distance = Ao
-1 -1 -1 -1 -1
mG-cos(180-)))
s()-aoP*sin()
Horse Power Required for Desired Application 1 RPM Required for Desired Application 20 Min. Shaft Diameter for Desired Application (in inches) 1.732
Shaft Sizes (in inches) Suitable? 1/2 Not Suitable 5/8 Not Suitable 3/4 Not Suitable