Professional Documents
Culture Documents
DATA SHEET
CUSTOMER: SHEET:
1 of 4
PROJECT:
PVC PLANT
TITLE:
"PVC PLANT"
NDICE DE REVISIONES
REV.
REV. 0 24/03/14
REV. A
REV. B
REV. C
REV. D
REV. E
REV. F
REV. G
REV. H
1 of 4
REV. H
DATA SHEET
PROJECT:
REV.
SHEET:
PROCESS
One (1)
(NOTE 3)
Diseo
Fabricacin
Como Construido
GENERAL
Process SYSTEM Comonomer TYPE OF INSULATION INSULATION THINKNESS INLET TEMPERATURE OTHER: VINNOLIT VCM By Vendor By Vendor 83 (Estimado) in F
OPERATING CONDITIONS
psig F Polyethylene Density (aprox) Comonomer Content Production 0.911 8% (by weight) 600000 TMA g/cm3 OUTLET FLUID INFORMATION
DESIGN CONDITIONS
F psig in STRESS RELIEF: X-RAY: NACE MR-01-75: SPECIAL REQUIREMENTS: BASIC DESIGN LOADS: Bomba de TEG TYPE SIZE Volt/Phase/Hz ENCLOSURE RPM HP OTHERS 380/3/50 EXPLOTION PROOF BY VENDOR BY VENDOR BY VENDOR CENTRIFUGAL Per code 100 NO NO %
OUTLET DEBUGGER
OD OD OD H tb tc in in in x x x ft S/S ft S/S ft S/S in in in
OTHER FEATURES
INSTALED INSTRUMENTS: REQUIRED STEPS/ PLATFORM INSTALLED: OTHER: Note 3 NO
1. The manufacturer shall specify the characteristics of the Comonomer to be used in the process 2. The manufacturer must complete list of features and equipment that includes their system to get the outlet conditions process 3. The manufacturer should list all the system's instrument. 4. The equipments must be designed according to the API 12J and ASME VIII Div 1
DATA SHEET
PROJECT:
0
SHEET:
REV.
TITLE:
PROCESS
MATERIALS
SHELL AND HEAD: PIPES: FLANGE: ACCESORIES: BOLTS: NUTS: GASKET: SIT/SKIRT: LIFTING LUGS: CS/SS CS/SS CS/SS CS/SS CS/SS CS/SS SPIRAL METALIC 304 SS CS/SS INTERNOS: BAFFLE: DIFUSOR DE ENTRADA: VORTEX BREAKER: WEIR BAFFLE: MIST ELIMINATOR COALESCENT FILTER: INTERNAL SUPPORTS BOLTS: ESPIRAL:
AUXILIARY BUILDINGS
DESCRIPTION STORAGE FOR RAW MATTERIALS AND PRODUCTS: TANK FARMS AND WAREHOUSES
1. Provision shall include all de auxiliar buildings (campament, material storage, workshops, fire systems, Laboratory, Canteen, recreational areas, offices, consumption water, industry water, etc.) 2. Manufacturer must complete the features of the equipments and instruments included in the skid 3. This list of equipments is consider as preeliminar 4. The manufacturer shall provide the system in a Skid (Poliethylene Plant)
5. After dehydration plant, the gas will be treated in a Dew Point Plant
A SHEET
NOTES
NOTAS
ONS
, Laboratory, Canteen,
DATA SHEET
PROJECT
0
SHEET:
REV.
TITLE
NOTAS: The manufacturer must provide mechanical, hydraulic and process warranty. 2. All equipment and accessories must be according to the list of GTLI vendor
1.
A SHEET