This document contains a mix design for asphalt concrete using three aggregate stockpiles and filler. It provides the sieve analysis results for each stockpile and filler, showing the percentage passing various sieve sizes. It then calculates the blended aggregate gradation based on trial percentages from each source. The blended gradation is compared to JKR specification limits to determine conformity. The conclusion is that the mix design conforms if the blended gradation falls within the JKR limits.
This document contains a mix design for asphalt concrete using three aggregate stockpiles and filler. It provides the sieve analysis results for each stockpile and filler, showing the percentage passing various sieve sizes. It then calculates the blended aggregate gradation based on trial percentages from each source. The blended gradation is compared to JKR specification limits to determine conformity. The conclusion is that the mix design conforms if the blended gradation falls within the JKR limits.
This document contains a mix design for asphalt concrete using three aggregate stockpiles and filler. It provides the sieve analysis results for each stockpile and filler, showing the percentage passing various sieve sizes. It then calculates the blended aggregate gradation based on trial percentages from each source. The blended gradation is compared to JKR specification limits to determine conformity. The conclusion is that the mix design conforms if the blended gradation falls within the JKR limits.
% Of Agg. 30 SIEVE SIZE % PASSING %STOCK % PASSING 20 100 30 100 14 100 30 100 10 89 26.7 98 5 45 13.5 61 3.35 29 8.7 55 1.18 0 0 35 0.425 0 0 0 0.15 0 0 0 0.075 0 0 0 HIGHWAY ENGINEERING EAL334 : MARSHALL MIX DESIGN AGGREGATE GRADING Instructions to users : Please key in the required JKR Specification in Column K according to the mix type ACW10 or etc. By trial and error, key in the appropriate mix percentage for each stockpile and compare the BLEND (Column J) to Column K Answer the Conclusion Prepared by: KKLIEW 2013 Column5 Aggregate Type3 Column7 Filler ( < OR =75 microns) C FILLER 30 35 %STOCK % PASSING %STOCK % PASSING 30 100 35 100 30 100 35 100 29.4 100 35 100 18.3 97 33.95 100 16.5 94 32.9 100 10.5 65 22.75 100 0 45 15.75 100 0 25 8.75 100 0 8 2.8 95 Conclusion: Is mixing proportion in conformity with JKR specifications ? A. Yes , if the % of passing in the BLEND ( Column J ) is within the acceptable range as stated in JKR Spec ( Column K) B. No, if the above statement is not obeyed Column9 Mixed aggregate percentage of passingCompare to BLEND JKR SPEC LIMIT 5 %STOCK % 5 100 100 5 100 100 5 96.1 90-100 5 70.75 58-72 5 63.1 48-64 5 38.25 22-40 5 20.75 12-26 5 13.75 6-14 4.75 7.55 4-8 Is mixing proportion in conformity with JKR specifications ? A. Yes , if the % of passing in the BLEND ( Column J ) is within the acceptable range as stated in JKR Spec ( Column K) B. No, if the above statement is not obeyed