Myth: Long stall time and high starting torque are independent
parameters and therefore can both be obtained at the
same time. There are a number of ways in which the stall time, which is defined as the period required for the rotor or stator of a machine to reach a limiting temperature while the rotor is at standstill, can be established. The simplest calculation for the stall time of a rotor is based on the assumption that during the stall period, all the locked rotor torque is transformed into heat energy that is stored in the rotor cage with none transferred into the surrounding iron core or air. Then, the power generated in the rotor bars is given by (1) as Q = kTN17040 where Q the heat generated in kilowatts k per unit bar contribution T locked rotor or starting torque in foot pounds N synchronous speed in revolutions per minute. Using the power input to the rotor bars, the stall time can be calculated from (2): t = MT/QCp where t stall time in seconds T rise for bar material in degrees Celcius M bar weight in pound meters Cp material thermal conductivity in pounds Celcius per kilowatt second.