This document provides design details for anchor bolts connecting a base plate to a concrete foundation. It summarizes:
1) The factored shear and axial loads on the connection and presents the grade of steel and concrete to be used.
2) It checks the capacity and strength of proposed anchor bolts by calculating tensions, shear forces and comparing to allowable values.
3) Additional checks are performed on the bolt length, plate thickness, and combined tension and shear to ensure the design is safe.
4) Dimensions of the base plate are proposed and the system is checked for tension forces and required plate thickness.
This document provides design details for anchor bolts connecting a base plate to a concrete foundation. It summarizes:
1) The factored shear and axial loads on the connection and presents the grade of steel and concrete to be used.
2) It checks the capacity and strength of proposed anchor bolts by calculating tensions, shear forces and comparing to allowable values.
3) Additional checks are performed on the bolt length, plate thickness, and combined tension and shear to ensure the design is safe.
4) Dimensions of the base plate are proposed and the system is checked for tension forces and required plate thickness.
This document provides design details for anchor bolts connecting a base plate to a concrete foundation. It summarizes:
1) The factored shear and axial loads on the connection and presents the grade of steel and concrete to be used.
2) It checks the capacity and strength of proposed anchor bolts by calculating tensions, shear forces and comparing to allowable values.
3) Additional checks are performed on the bolt length, plate thickness, and combined tension and shear to ensure the design is safe.
4) Dimensions of the base plate are proposed and the system is checked for tension forces and required plate thickness.
ASTER BUILDING SOLUTION (P) LTD Job No.: J-619 Date: 19-02-2014 Client: CIDCO Designed By: MSS Building: Mumbai Metro Checked By: MNU Detail A (node 1) Factored Design Forces DL+LL DL+WL Shear Force (Fx) kN 77 145 Axial load (Fy) kN 254 322 Bending Moment (M) kN 258 390 Grade of steel N/mm 2 Grade of Anchor Bolt Concrete Grade (fck) N/mm 2 Geometric properties Web Size mm 400 x12 Flange Depth mm 300 x20 Bolts Dia mm No. Of Bolts (n) Plate Thickness (t) mm Pitch (p) mm O.K guage (g) mm O.K Edge Distance O.K Embed Length (Le) mm Plate Length 'L' : 650 mm Plate Width 'W' : 500 mm Check for capacity of bolts Sd = 2x140+2x270+4x410 = 857400 mm^4 Maximum Tension in extreme Bolt= 390X10^3x410/857400 186.5 kN Actual Allowable (kN) (kN) 186.50 Max Tension due to Axial Force ( Fy/n ) : 26.84 213.34 323.14 Hence Safe Shear in each Bolt ( Fx/n) : 12.09 207.30 Hence Safe Check for thickness of Plate in Tension P x g/ 4 : 213.34x0.096/4 : 5.13 kN.m Thickness of plate required ( t ) : 32.00 <36mm Hence Safe Check for Combined Tension and Shear Actual Tension Actual Shear Allowable Tension Allowable Shear (213.34 / 323.136 ) ^2+(12.09 / 207.3)^2 = 0.44 <1.0 Hence Safe Check for Bolt Length Bond Stress : 1.9 N/mm 2 Pullout Force resisted by square plate in tension 56.5 kN Force resisted by bolt 156.8 kN Length of bolt required : Tension in bolt/(p x bolt Dia.)x Bond stress : 156.8x1000/(3.14x32)x1.9 : 821 mm Hence Safe + <1.0 12 36 140 96 50 850 DESIGN OF BASE PLATE 345 Gr 8.8 40 32
Page 24 of 32
Check for capacity of bolts Shear Force (Fx) 77 VERTICAL LOAD (downward '+'-ve) (kN) : 254 B.M (kN-m) : 258 Try with a BASE PL. length L (mm.) : 650 BASE PL. width B (mm.) : 500 Eccentricity, e (mm.) = 1017 mm Tension Occurs in the Anchor Bolts Max. stress on fdn. concrete, P max (N/mm 2 ) = 8.12 OK. Min. stress on fdn. concrete, P min (N/mm 2 ) = -6.55 c : L * Pmax / (Pmax+Pmin) = 360 mm a : L/2 -c/3 = 205 mm e : edge distance 50 mm y : L - c/3 - e = 480 mm FT = Tension in all anchor bolts located at one side of base plate FT = (M - P x a) /y = 429 kN Tension per bolt 72 kN 323.14 Hence Safe Shear per bolt 4 kN 207.29 Hence Safe Check for thickness of Plate in Compression For Cantilever Plate Portion ALLOWABLE BEARING STRESS (N/mm 2 ) : 24.0 N/mm 2 Projection of base pl. beyond column flange/gusset (a1) (mm) = 105 Width of Plate (d1) (mm) = 96 a1/d1 = 1.09 1.09 From the Mukhanov chart, a = 0.12 B.M., M = a.q.b 2 Here, q (N/mm 2 ) = 5.76 P y = 254 kN. M (N-mm) = 6145 (in a 1 mm. wide plate strip) t reqd (mm.) = 10.90 < 36 mm., OK. M = 258.211153903157 k 105 mm. t = 36 mm. Pmax = 8.12 N/mm2 L = 650 mm. For Mid Span Portion Length of the plate portion, b (mm) = 133 (two stiffeners in between) Width of the plate portion, a (mm) = 244 a/b = 1.83 From the Mukhanov chart, a = 0.130 B.M., M = a.q.b 2 Here, q (N/mm2) = 3.28 M (N-mm) = 7598 (in a 1 mm. wide plate strip) t reqd (mm.) = 12.1 < 36 mm., OK. a