Professional Documents
Culture Documents
2
in. Over 2 in.
Material Range, F
1
2
or less to 2 in. to 5 in. Over 5 in.
5 hrs. plus 15 min.
for each
additional inch
P-No.6 10501150 30 min. 1 hr./in. 1 hr./in. over 5 in.
This is Electrontic File Page # 137
TABLE 1
MAXIMUM ALLOWABLE STRESS VALUES
For Temperature Maximum Allowable
Not Exceeding, F Stress, ksi
20 to 100 27.5
200 27.5
300 26.9
400 26.2
500 25.8
600 25.2
650 24.8
700 24.4
(1) The welding procedure and performance quali-
cations shall be conducted as prescribed in Section
IX for P-No. 6 Group 4 material.
(2) The postweld heat treatment of welds shall
be in accordance with PW-39 and Table 2 of this
Code Case.
(c) This Case number shall be shown on the Data
Report.
Asme BPVC Code Cases 1998 Edition CCASE12073 06-15-98 13:20:28
This is Electrontic File Page # 138