Cape Peninsula University of Technology - Department of Electrical Engineering Set by AA du Plessis
12V 560 22k ELECTRONICS 1 PRACTICAL 2 AIM: To determine the characteristic curve of a diode. EQUIPMENT REQUIRED: 1. Multimeter and test leads. 2. Breadboard. 3. Power supply and connectors. 4. Components: 1 x 560 resistor 1 x diode 1 x 22 K pot. INSTRUCTIONS: Build the circuit above and then do the following: 1. Adjust the potentiometer so that there is 0,1 V across the diode. 2. Measure the voltage across the 560 resistor and calculate the current and fill it in on the table. 3. Repeat 2 and 3 for the other values in the table below. 4. Draw a graph of current versus voltage for the diode. Volts mA 0,1 0,2 0,3 0,4 0,5 0,55 0,6 0,65 0,7 0,75