This document contains homework problems for an engineering mechanics class. Problem 1 asks students to draw influence lines for the vertical reactions at supports B, D, and F, as well as for the bending moment at point E and shear forces on either side of support D. Problem 2 asks students to use the influence lines from Problem 1 to calculate reactions and bending moment for a given structure. Problem 3 asks students to determine maximum values for reactions, bending moments, and shear forces using influence lines under given dead and live loads. Problem 4 repeats Problem 3 but replaces the live loads with specific wheel loads.
This document contains homework problems for an engineering mechanics class. Problem 1 asks students to draw influence lines for the vertical reactions at supports B, D, and F, as well as for the bending moment at point E and shear forces on either side of support D. Problem 2 asks students to use the influence lines from Problem 1 to calculate reactions and bending moment for a given structure. Problem 3 asks students to determine maximum values for reactions, bending moments, and shear forces using influence lines under given dead and live loads. Problem 4 repeats Problem 3 but replaces the live loads with specific wheel loads.
This document contains homework problems for an engineering mechanics class. Problem 1 asks students to draw influence lines for the vertical reactions at supports B, D, and F, as well as for the bending moment at point E and shear forces on either side of support D. Problem 2 asks students to use the influence lines from Problem 1 to calculate reactions and bending moment for a given structure. Problem 3 asks students to determine maximum values for reactions, bending moments, and shear forces using influence lines under given dead and live loads. Problem 4 repeats Problem 3 but replaces the live loads with specific wheel loads.
Problem 1 Draw the influence lines of: vertical reactions at supports B, D, and F bending moment at E (the middle of span DF) shear force immediately to the left and right of support D as a unit load moves from A to G.
Problem 2 Use the influence lines from Problem 1 to calculate all reactions and bending moment at E for the structure shown below.
Problem 3 The beam structure in Problem 1 will be designed to receive: Dead load: uniform load of 3 kips/ft, applied on the entire beam, and Live loads: uniform load of 6 kips/ft and a concentrated load of 25 kips.
Use the influence lines to determine: the maximum value of each vertical reactions the maximum value of positive bending moment at E the maximum value of negative bending moment at E the maximum value of shear force immediately to the left of support D the maximum value of shear force immediately to the right of support D
Problem 4 Repeat Problem 3, but replace the live loads with the wheel loads shown below:
B 10 ft C D 12 ft E 12 ft A G F 10 ft 10 ft 6 ft B 10 ft C D 12 ft E 12 ft A G F 10 ft 10 ft 6 ft 5 kips/ft 3 kips/ft 10 kips 20 kips 12 ft 24 kips 6 ft 24 kips 6 kips