To calculate the data rate of LTE, you must consider several factors:
1) LTE divides the radio resources into resource blocks, time slots, and modulation symbols. With a 20 MHz channel bandwidth using 100 resource blocks and normal cyclic prefix, the number of bits in a subframe is 100,800.
2) Given this configuration, the data rate is 100,800 bits divided by the 1 millisecond subframe duration, which equals 100.8 Mbps.
3) Using technologies like 4x4 MIMO or error correction coding can increase the achievable data rate, with 4x4 MIMO providing up to 403 Mbps and a 3/4 coding rate providing around 302 Mb
To calculate the data rate of LTE, you must consider several factors:
1) LTE divides the radio resources into resource blocks, time slots, and modulation symbols. With a 20 MHz channel bandwidth using 100 resource blocks and normal cyclic prefix, the number of bits in a subframe is 100,800.
2) Given this configuration, the data rate is 100,800 bits divided by the 1 millisecond subframe duration, which equals 100.8 Mbps.
3) Using technologies like 4x4 MIMO or error correction coding can increase the achievable data rate, with 4x4 MIMO providing up to 403 Mbps and a 3/4 coding rate providing around 302 Mb
To calculate the data rate of LTE, you must consider several factors:
1) LTE divides the radio resources into resource blocks, time slots, and modulation symbols. With a 20 MHz channel bandwidth using 100 resource blocks and normal cyclic prefix, the number of bits in a subframe is 100,800.
2) Given this configuration, the data rate is 100,800 bits divided by the 1 millisecond subframe duration, which equals 100.8 Mbps.
3) Using technologies like 4x4 MIMO or error correction coding can increase the achievable data rate, with 4x4 MIMO providing up to 403 Mbps and a 3/4 coding rate providing around 302 Mb
How could we calculate the data rate of LTE (Long-Term Evaluation)?
Best Answer Asker's Choice
Mahi answered 4 years ago From the 3gpp specification: -1 Radio Frame = 10 Sub-frame -1 Sub-frame = 2 Time-slots -1 Time-slot = 0.5 ms (i.e 1 Sub-frame = 1 ms) -1 Time-slot = 7 Modulation Symbols (when normal CP length is used) -1 Modulation Symbols = 6 bits; if 64 QAM is used as modulation scheme
Radio resource is manage in LTE as resource grid.... -1 Resource Block (RB) = 12 Sub-carriers
Assume 20 MHz channel bandwidth (100 RBs), normal CP
Therefore, number of bits in a sub-frame
= 100RBs x 12 sub-carriers x 2 slots x 7 modulation symbols x 6 bits
= 100800 bits
Hence, data rate = 100800 bits / 1 ms = 100.8 Mbps
* If 4x4 MIMO is used, then the peak data rate would be 4 x 100.8 Mbps = 403 Mbps.
* If 3/4 coding is used to protect the data, we still get 0.75 x 403 Mbps = 302 Mbps as data rate.
I think this gives you little help. If any question, feel free to ask.