You are on page 1of 2

1.

Current flows in a circuit when


a) a switch is opened b) a switch is closed
c) the switch is either open or closed d) there is no voltage
2. Resistance is measured in
a) Henries b) Ohms
C) Hertz d) Watts
3. Which of the following is not an electrical quantity?
a) Voltage b) current
c) distance d) power
4. Which of the following is not a type of energy source?
a) Battery b) solar cell
c) generator d) Rheostat
5. A Current is said to be direct current when its?
a) Magnitude remains constant with time b) Magnitude changes with time
c) Direction change with time d) Magnitude and direction changes with time
6. The basic function of a transformer is to change?
a) Level of the voltage b) The power level
c) The power factor d) The frequency
7. Which of the following is used as a passive component in an electronic circuit?
a) Vaccum diode b) Zener diode
c) Inductor d) SCR
8. Transmission lines connect ?
a) Generating station to a switching station / step down transformer station
b) Step down transformer station to service transformer banks
c) distribution transformer to consumer premises
d) service point to consumer premises
9. the basic element of an electric drive are
a) electric motor and the transmission system
b) electric motor, the transmission and control system
c) the transmission and control system
d) electric motor and conversion equipment
10. Any physical system which does not automatically correct for variation in its output, is called?
a) Open loop system b) Closed loop system
c) Unstable system d) None of the above

1.b
2.b
3.c
4.d
5.a
6.a
7.c
8.a
9.b
10.a

You might also like