The document provides requirements for the design of a steel structure, including: drawing a bracing system to scale; designing an intermediate purlin; computing internal forces in truss members; designing truss members as back-to-back angles; designing a back tie using two back-to-back UPNs; designing connections using fillet welding and bolts; and drawing the truss to scale. The design is to be completed according to information provided about steel properties, bolts, plate thickness, loads, and other structural elements.
The document provides requirements for the design of a steel structure, including: drawing a bracing system to scale; designing an intermediate purlin; computing internal forces in truss members; designing truss members as back-to-back angles; designing a back tie using two back-to-back UPNs; designing connections using fillet welding and bolts; and drawing the truss to scale. The design is to be completed according to information provided about steel properties, bolts, plate thickness, loads, and other structural elements.
The document provides requirements for the design of a steel structure, including: drawing a bracing system to scale; designing an intermediate purlin; computing internal forces in truss members; designing truss members as back-to-back angles; designing a back tie using two back-to-back UPNs; designing connections using fillet welding and bolts; and drawing the truss to scale. The design is to be completed according to information provided about steel properties, bolts, plate thickness, loads, and other structural elements.
Covering = 15 kg/m2 Live load = According to Egyptian Code Wind load = According to Egyptian Code Required 1. Draw to scale 1:100 the bracing system required for the stability of the structure in all views. 2. Design an intermediate purlin 3. Compute the maximum internal forces in the truss members 4. Design the truss members as two back-to-back angles 5. Design the back Tie AC as two back-to-back UPNs 6. Design all truss and tie connections using fillet welding and HS Bolts 7. Draw the truss to scale 1:10