Professional Documents
Culture Documents
MW Config
(A S O l (Conf<jura*n)
PLC
&
PUO AS)
I E a
Ji
101UR2
P'ofde
| PCS 7_V61
$ PRQF1BUSDP
D ow iJood to Module
Cancel
sw (| MocUc
5
fl D O a K 2 4 \/a &
f
If
IF 4 0 & 7 2 F *
8 IF AI2*HART. Ex
81
82
QideiNutibei
6E S ?32?& FO H H B e
6 E S ~ X tt-7 m & a *B 0
6ES 3
' 325H D O I-O M IO
|1
6ES7331-71800 OABO
0
512 :
51:
PROFIBUSPP
foi 5*MaTICS7
CP modcte
Pies;fi togetHelp
SIMATIC PCS 7
D
: T.pCS
15
Pa
*ale:S
7.1
S1
Y2S0_C
V67D_systtonf22
u#
l AulofralwnandDrivfo
esf
A fte r the station configuration was downloaded w ith CPU STOP, you made
changes to the configuration and have not saved them yet.
In the hardware configuration select
PLC -> Download to Module
or click the icon (point 1 in the slide)
The CPU keyswitch m ust be set to RUN_P.
Then download in RUN state is offered.
Should the CPU nevertheless go to STOP as a result of downloading in RUN, this
is an indication that the CPU software is incomplete or does not capture the
triggered events. This problem is automatically solved by using the PCS 7 driver
blocks.
Training Center
for Automation and Drives
System Config