In the refinery. O Checked and changed the carbon brush of the motors of the power plant. O Tested the voltage regulation of an UPS (uninterruptable power supply) with 100 kHz. Projects Held in university September 2014 - January 2015 Constructed a DC to DC switch mode power supply based on push-pull topology. O Used a snubber network for filtering the to produce an output with less ringing.
In the refinery. O Checked and changed the carbon brush of the motors of the power plant. O Tested the voltage regulation of an UPS (uninterruptable power supply) with 100 kHz. Projects Held in university September 2014 - January 2015 Constructed a DC to DC switch mode power supply based on push-pull topology. O Used a snubber network for filtering the to produce an output with less ringing.
In the refinery. O Checked and changed the carbon brush of the motors of the power plant. O Tested the voltage regulation of an UPS (uninterruptable power supply) with 100 kHz. Projects Held in university September 2014 - January 2015 Constructed a DC to DC switch mode power supply based on push-pull topology. O Used a snubber network for filtering the to produce an output with less ringing.
Aali, Bahrain Mobile: (+973) 33377156 Email: mohammedlanasser93@gmail.com EXPERIENCE March 2015 to Present
Salesman in Zara seef Mall:
Rearranged the classic formal section and fixing the
suits. Brought items to display (replenishment (24): when customers buy items, I had to bring the same items from the store).
January - February 2015
Trained in the power plant 2.0 in the refinery.
o Checked and changed the carbon brush of the motors of the power plant. o Tested the voltage regulation of an UPS (uninterruptable power supply) with 100 kHz. o Tested thyristor before using. o Tested and provided maintenance to transformers. o Tested motors performance in the desalination area.
January February 2014
Bapco
Bahrain Flour Mills Company
Trained in the electrical department.
o Test Watts of the power supplies. o Test the power of a 3 phase motor. Projects Held in university
September 2014 - January 2015
Constructed a DC to DC switch mode power supply based on push-pull
topology: o Designed the circuit diagram using Altium software to simulate the output of the circuit before building it. o Used a snubber network for filtering the to produce an output with less ringing. Constructed an Active load power factor correction: o Measured the power factor of the power supply (which was 0.7). o Used a capacitor to correct the power factor value (which was 0.89). o Replaced the capacitor with TDA4628 microchip to make perfect of the power factor value (which was 1.0). EDUCATION
2008
High school certificate (91.1%) GPA, Altaawon secondary school.
2016
Bachelor of electronic engineering, University Of Bahrain Polytechnic.
INTERCULTURAL AND TECHNICAL SKILLS
Fluent in Arabic (mother tongue) and English.
Fast leaner, hard worker and have excellent communication skills (gained through experience in Zara). Effectual Research skills, Proactive, excellent IT skills including Microsoft products (gained through studying in Bahrain Polytechnic).