Professional Documents
Culture Documents
Description:
1.Indirect drying using Stainless Steel Cylinders.
2.suitable for one or two sided drying of all types
of fabrics.
3. High Efficiency method for intermediate or final
drying.
Contact drying
1.Drum dryer: with this system, the fabric moves
forward arranged on several heated drums.
2.The drying temperature ranges between 120-130 C
and the cylinders are heated by means of steam at a
pressure of 1-3 atm.
3.This very efficient and low-cost drying system is
particularly suitable for flat fabrics, with slightly
evidenced structure, which cannot be easily affected
by tension during feeding.
4.Used for intermediate drying and for light finishes;
this system is not suitable for durable thermosetting
resin finishes.
Objects:
B
A
B
A
B
A
B
A
Main parts:
Main parts:
1.
Hollow cylinder
2.
Guide roller
3.
Free roller
4.
Pin roller
Utilities:
1.
Electricity
2.
Water
3.
Steam
Maintenance
Guide roller:
Here we have to look over the movement of guide roller.
We have to provide the steady of guide roller or without
movement of guide roller.
Free roller movement:
Free roller should be move freely as the path of material.
So we always look over of the free movement of free
roller.
Proper gearing:
It is very important that the lack of proper gearing will
hamper the correct function. So we have to maintain the
gearing properly.
Maintenance
Motor revolution:
For proper speed the correct rpm(10 to 150) of motor should
be check as maintenance.
Proper heating:
We have to confirm of even & proper heating of every
cylinder as the action of drying.
Uses of cylinder dryer:
1.To dry the fabric
2.To remove the remaining excess water from fabric.
Technical Details
Cylinder Width
1200 to 3600 mm
2 to maximum 12
Cylinder Diameter
Design Pressure
Drive
Speed
10 to 150 mtrs/min
Over
heated
+
excess
dried
cloth
Group trapping