Using appropriate hand tools and test equipment Maintaining hand tools Selecting components to be measured Carrying out measurements and calculation Identifying different kinds of technical drawing Interpreting technical drawing Identifying hazards and risks Evaluating hazards and risks Controlling hazards and risks Prepared by: Edwin E. Manaoat
Which tool is used to loosen or tighten cross-head screws?
A. Anti-static mat B. Philips head screwdriver C. Hex driver C. Wire cutter Which tool is used for hardware to stand on to prevent static electricity from building up? A. Anti-static mat B. Philips head screwdriver C. Hex driver D. Wire cutter Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop? A. Anti-static mat B. Philips head screwdriver C. Torx screwdriver D. Wire cutter Which tool is used to loosen or tighten slotted screws? A. Torx screwdriver C. Hex driver C. Philip head screwdriver D. Flat head screwdriver Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws. A. Anti-static mat C. Philips head screwdriver C. Hex driver D. Wire cutter Turn the screwdriver _________ to tighten the screw. A. Clock wise B. Off C. Counter clock wise D. Down Turn the screwdriver ________________ to loosen the screw. A. Clock wise B. Off C. Counter clock wise D. Down Use a ________ head screwdriver with crosshead screws. A. Flat B. Philips C. Hex D. six-sided Clean the contacts on components with _________ alcohol. A. Isopropyl B. Denatured C. ethyl D. rubbing Use a __________ to loosen and tighten bolts that have a hexagonal head. A. Hex driver B. six driver B. six-sided driver D. torx screwdriver