Professional Documents
Culture Documents
Home
Lab1Construction
ofMasonryWalland
Prisms
Generaldescription:
Workabilityofmortarisitsease
of use measured by the flow of
the mortar. The standard flow
tests uses a standard conical
frustum shape of mortar with a
diameter of four inches. This
mortar sample is placed on a
flowtableanddropped25times
within15seconds.Asthemortar
isdropped,itspreadsoutonthe
flow table. The ititial and final
diameters of the mortar sample
areusedtocalculateflow.Flow
is defined as the increase in
diameterdividedbytheoriginal
diameter multiplied by 100.
Laboratorymixedmortar,where
conditions are more controlled,
should have a flow of
approximately 110. In the field,
mortar is usually mixed to a
flow of about 130150. As
mortarsits,itsflowdecreases,to
maintain workability, water can
be added, this is called
retempering.Mortarshouldonly
be retempered for the first two
andahalfhours,afterthistime,
anewbatchshouldbemixed.
Lab
MasonryWall
InitialRateofAbsorption
MixingMortar
MortarWorkability
MortarAirContent
PrismConstruction
Extras
LabHandout
SampleLabReport
Photos
LabEquipmentandMaterials
ExtraResources
LabWorksheet
PrinterFriendlyVersion
Home
a)Mortarinconicalfrustrumb)Priortodroppingtablec)After25drops
Universityof
Wyoming
RMMI
PCA
NCMA
TMS
http://www.masonrysociety.org/masonry%20lab/lab%201/Lab1workability.html
1/1