TATA
TATA STEEL
Continuous Monitoring System For Gas Flow and
Surface of Charged Material inside Blast Furnaces
The tides are changing
You are now in an increasingly competitive world
The customers are ever so demanding
The strictest quality specifications are in place
You have to yield maximum production from
‘optimum consumption of material and energy
Are you prepared
for the future?
Blast furnace top gas flow distribution monitoring is used to
continuously monitor, in real time, the blast furnace top gas flow &
charged material behavior.
Furnace Scope is able to observe charge and gas flow for uneven or
irregular distribution so that the cause of the abnormality can be
determined and appropriate remedial strategies be put in place.
Furnace Scope has been designed for continuous visual observation
of the whole blast furnace top interior and not for thermal pattern
‘monitoring,Furnacescope
Furnace Scope monitors the gas flow at the furnace top, and observes the surface of ore or coke
when theirtemperature exceeds the proper level
1. Furnace Scope provides the operator with an image of the above threshold temperature gas
flow through ore and coke dust
2. Furnace Scope provides the operator with an image of the material surface when temperature
ofthe chargeis at above threshold level
3. Furnace Scope also provides an image of low temperature objects asitis equipped with aCCD
semiconductor with higher sensitivity at low temperature
ciaiag
Operator's confidence - Furnace operators can v Abnormal operation prediction and its
visually observe the operating conditions within phenomenon
the blastfurnaceallthe time
¥ Gasignition monitoring
v Distribution control of ore and coke being
chargedatthe top of blastfunace v_ Prevention of furnace wall damage
¥_ Operational management by modifying operating
methods
Automation Division
‘TATA STEEL
Jamshedpur-831001
Ph: +91 9234531256 / 9204058066, Fax: +91 657-2422767
E-mail :bdv.automation@tatasteel.com
Visit us at: wwwautomationtatasteel.com