Professional Documents
Culture Documents
EXTENSION CABLE
This is the part that connects to the probe and allows you to reach a
convenient junction box. It has a length of triaxial cable identical to
that used on the probe. One end of the cable terminates to a 75
ohm miniature coaxial female connector for connection to the probe.
The other end terminates to a 75 ohm miniature coaxial male
connector for connection to the Proximitor.
A piece of heat shrink is available on the cable to be slid over the
probe to extension cable extension cable connection. This prevents
unwanted grounding of one side of the coil.
PROXIMITOR
This is the part that contains the electronics and is usually mounted
in a junction box. It has a die cast aluminum case with a powder
gray coat that resists oils, solvents and chemicals. A 75 ohm
miniature coaxial female connector is chassis mounted through the
casing for connection to the extension cable. A terminal strip is also
case mounted for supplying voltage to and taking signals from the
Proximitor. The base has an isolation plate mounted on it that will