Professional Documents
Culture Documents
English
Italiano
Franais
Espaol
Deutsch
Arabic
NETWORK SETUP
For Video Recorder
Please read instructions thoroughly before operation and retain it for future reference.
We reserve the right to revise or remove any content in this manual at any time.
We do not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual.
The content of this manual is subject to change without notice.
V0.9
1. BEFORE STARTED
Note: Network configurations may require a person who has advanced network knowledge. Its
recommended to check with your installer for this service if possible.
Understand How Your Laptop / Computer Connect to Internet
Then, connect your video recorder directly to your router / hub / modem with a network cable, and power it on.
If youre using:
2. Router + Modem
Before configuring, make sure:
Your laptop / PC is connected to the same router as the video recorder is intended to connect to.
You know the IP address, user name and password to access your router.
The DHCP function of your router is on.
Note: For details, please refer to the user manual of your router.
The setup of your video recorder is completed as instructed in its user manual, and its powered on.
Note: For details, please refer to the user manual of your video recorder.
Step1: Connect your video recorder to the router with a RJ45 network cable, similar as follows:
Laptop or PC
LAN Port
WAN Port
Router
POWE
RA
LM
W
A
N
L
A
N
R
Modem
WAN Port
Video recorder
Devices connected with a RJ45 network cable
" or
WAN
LAN
DDNS
NETWORK TYPE
DHCP
IP
192.168.1.112
GATEWAY
192.168.1.254
NETMASK
255.255.255.0
PRIMARY DNS
168.095.1.1
SECONDARY DNS
139.175.55.244
PORT
88
EXIT
Network NETWORK.
ADVANCED CONFIG
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
NETWORK
SNTP
FTP
DDNS
NETWORK TYPE
DHCP
IP
192.168.001.010
GATEWAY
192.168.001.254
NETMASK
255.255.255.000
PRIMARY DNS
168.095.001.001
SECONDARY DNS
139.175.055.244
PORT
0080
EXIT
or
Step3: Select DHCP, and configure the DNS setting and port number.
Note: DNS is the domain name server obtained from your ISP (Internet Service Provider).
Note: The default port number is 80. Typically, the TCP port used by HTTP is 80. However in some cases,
it is better to change this port number for added flexibility or security.
Then, note down the IP address shown in IP. This is the IP address assigned to your video recorder by
the router. Youll need it later for port forwarding.
Step4: Go to DDNS, and select eagleeyes in SYSTEM NAME.
Note down the whole address under CURRENT HOST ADDRESS, such as
MAC000E5318B3F0.ddns.dvrtw.com.tw. This will be the address used to access your video recorder
remotely.
ADVANCED CONFIG
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
WAN
LAN
DDNS
DDNS
ON
SYSTEM NAME
eagleeyes
HOST NAME
MAC000E5318B3F0
EMPTY
EXIT
MAC000E5318B3F0.ddns.dvrtw.com.tw
Then, select EXIT to return to the live view, and continue to Step5 for port forwarding.
Step5: Open Internet Explorer from your laptop / PC, and enter the IP address of your router to access your
router. Enter the user name and password if needed.
Note: Internet Explorer is the registered trademark of Microsoft Corporation in the United States and
other countries.
Step6: In the router setting interface, go to the port forwarding (or virtual server) rule configuration page.
Note: The naming of port forwarding or virtual server may vary based on different router brands. To
know where it is, please refer to the user manual of your router.
Then, enter the IP address and the port number you note down in Step3, and enable this rule.
Take D-Link router as an example:
Go to ADVANCED PORT FORWARDING.
IP Address:
Ports to Open:
The port number you set for the video recorder, such as 88 in our example.
Note: For details, please refer to the user manual of your video recorder.
Step1: Connect your video recorder to the hub or modem with a RJ45 network cable, similar as follows:
WAN Port
Video recorder
Hub
Modem
(Optional)
or
WAN
LAN
DDNS
NETWORK TYPE
DHCP
IP
192.168.1.112
GATEWAY
192.168.1.254
NETMASK
255.255.255.0
PRIMARY DNS
168.095.1.1
SECONDARY DNS
139.175.55.244
PORT
88
www.google.com
EXIT
Network NETWORK.
ADVANCED CONFIG
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
NETWORK
SNTP
FTP
DDNS
NETWORK TYPE
DHCP
IP
192.168.001.010
GATEWAY
192.168.001.254
NETMASK
255.255.255.000
PRIMARY DNS
168.095.001.001
SECONDARY DNS
139.175.055.244
PORT
0080
EXIT
Step3: (Optional) If you see INTERNET AVAILABILITY ADDRESS in Network WAN, make sure a valid
address, such as www.google.com, in your country is entered to help the recorder determine whether the
network setup is successfully or not when the setup is completed later.
Step4: Select STATIC, PPPOE or DHCP based on your network type, and change the port number if
needed.
For STATIC, enter the information of the static IP address, gateway and net mask from your ISP, and go to the next
section, Check your connection via Internet Explorer directly to examine your setup.
For PPPOE, enter the DNS address, user name and password from your ISP, assign a port number (if necessary), and
go to Step4 to continue.
Note: The default port number is 80. Typically, the TCP port used by HTTP is 80. However in some cases,
it is better to change this port number for added flexibility or security.
For DHCP, go to Step4 to continue.
Step5: (PPPOE & DHCP Only) Go to DDNS, and select eagleeyes in SYSTEM NAME.
Note down the whole address under CURRENT HOST ADDRESS, such as
MAC000E5318B3F0.ddns.dvrtw.com.tw. This will be the address used to access your video recorder
remotely.
ADVANCED CONFIG
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
WAN
LAN
DDNS
DDNS
ON
SYSTEM NAME
eagleeyes
HOST NAME
MAC000E5318B3F0
EMPTY
EXIT
MAC000E5318B3F0.ddns.dvrtw.com.tw
If yes, check the icon on the status bar of your recorder, and make sure you see
Step1 again.
jp_V0.9
1.
()
RJ45
//
2 2. +
5 3. /
2. +
/
IP
DHCP
1RJ45
Laptop or PC
LAN
LAN
Port
WAN
WAN
Port
Router
POWE
RA
LM
W
A
N
L
A
N
R
Modem
WAN
Port
WAN
Video recorder
Devices
connected with a RJ45 network cable
RJ45
WAN
WAN
LAN
DDNS
DHCP
IP
192.168.1.112
192.168.1.254
255.255.255.0
DNS
168.095.1.1
DNS
139.175.55.244
88
SNTP
FTP
DHCP
DDNS
IP
192.168.001.010
192.168.001.254
255.255.255.000
DNS
168.095.001.001
DNS
139.175.055.244
0080
3DHCPDNS
DNS ISP ()
80 HTTP TCP 80
IP IP
IP IP
4DDNSeagleeyes
MAC000E5318B3F0.ddns.dvrtw.com.tw
WAN
LAN
DDNS
DDNS
ON
eagleeyes
MAC000E5318B3F0
MAC000E5318B3F0.ddns.dvrtw.com.tw
5
5 / Internet Explorer IP
Internet Explorer
6 ()
3 IP
D-Link
IP Address
192.168.1.112 IP
(IP )
Ports to Open
88
()
Internet Explorer
1 )
- iOS/Android mobile
1Internet Explorer
2 URL
http://hostaddress:portnum
http://MAC000E5318B3F0.ddns.dvrtw.com.tw:88
1
iOS/Android mobile
1App StoreSM (iOS ) Google Play (Android )
EagleEyes
2 iOS/Android 3G
3 EagleEyes
4+
MAC000E5318B3F0.ddns.dvrtw.com.tw
88
admin ()
5
3. /
IP PPPoE
IP IP ISP ()
PPPoE ISP ()
1RJ45
WAN
WAN
Port
Video
recorder
Hub
Modem
()
(Optional)
Devices
connected with a RJ45 network cable
RJ45
WAN
WAN
LAN
DDNS
DHCP
IP
192.168.1.112
192.168.1.254
255.255.255.0
DNS
168.095.1.1
DNS
139.175.55.244
88
www.google.com
SNTP
FTP
DDNS
DHCP
IP
192.168.001.010
192.168.001.254
255.255.255.000
DNS
168.095.001.001
DNS
139.175.055.244
0080
3()NetworkWAN
(www.google.com )
4 PPPOEDHCP
ISP IP
- Internet Explorer
PPPOEISP DNS ()
4
80 HTTP TCP 80
DHCP 4
WAN
LAN
DDNS
DDNS
ON
eagleeyes
MAC000E5318B3F0
EMPTY
MAC000E5318B3F0.ddns.dvrtw.com.tw
(WAN)
(WAN)
(WAN)
1
Internet Explorer
1 ()
iOS/Android mobile
1Internet Explorer
2 IP ()(PPPOE/DHCP) URL
http://ipaddress:portnumhttp://hostaddress:portnum
http://MAC000E5318B3F0.ddns.dvrtw.com.tw:88
1
iOS/Android mobile
1 App StoreSM (iOS ) Google Play (Android )
EagleEyes
2 iOS/Android 3G
3 EagleEyes
4+
IP ()
(PPPOE/DHCP)
MAC000E5318B3F0.ddns.dvrtw.com.tw
88
admin ()
5
IMPOSTAZIONE RETE
Per il registratore video
Ita_V0.9
1. OPERAZIONI PRELIMINARI
Nota: le configurazioni di rete possono richiedere una persona esperta di reti avanzate. Si consiglia di
verificare con linstallatore la disponibilit del servizio.
Informazioni su come connettere il laptop/computer a Internet
1. Router + Modem
PC
Laptop
Router
Modem
Laptop
Hub
(opzionale)
Modem
Quindi collegare il registratore video direttamente al router / hub / modem mediantre un cavo di rete e accenderlo.
Se si sta utilizzando un:
2. Router + Modem
Prima di eseguire la configurazione, verificare che:
Il laptop / PC sia collegato allo stesso router del registratore video a cui eseguire il collegamento.
Si conosca lindirizzo IP, nome utente e password per accedere al router.
La funzione DHCP del router sia attiva.
Nota: Per informazioni sullinstallazione, fare riferimento al manuale utente del registratore video.
Fase1: Collegare il ricevitore video al router con un cavo di rete RJ45, simile al seguente:
Laptop o PC
Porta WAN
Porta LAN
Router
Modem
Porta WAN
Registratore video
Dispositivi collegati con un cavo di rete RJ45
Fare clic col tasto destro del mouse per visualizzare il menu principale e selezionare
WAN
LAN
DDNS
TIPO RETE
DHCP
IP
192.168.1.112
GATEWAY
192.168.1.254
NETMASK
255.255.255.0
DNS PRIMARIO
168.095.1.1
DNS SECONDARIO
139.175.55.244
PORTA
88
USCITA
Rete RETE.
AVANZA NELLA CONFIG.
CANERA
RILEVAMENTO
AVVISO
RETE
VISUALIZZA
REGISTRA
REMOTO
RETE
SNTP
FTP
DDNS
TIPO RETE
DHCP
IP
192.168.001.010
GATEWAY
192.168.001.254
NETMASK
255.255.255.000
DNS PRIMARIO
168.095.001.001
DNS SECONDARIO
139.175.055.244
PORTA
0080
USCITA
WAN
LAN
DDNS
DDNS
ACCESO
NOME SISTEMA
eagleeyes
NOME HOST
MAC000E5318B3F0
VUOTO
USCITA
MAC000E5318B3F0.ddns.dvrtw.com.tw
Quindi selezinare ESCI per tornare alla vista dal vivo e continuare alla Fase 5 per linoltro porta.
Fase5: Aprire Internet Explorer dal laptop / PC e inserire lindirizzo IP del router per accedere al router. Se
necessario, inserire il nome utente e la password.
Nota: Internet Explorer un marchio registrato di Microsoft Corporation negli Stati Uniti e altri paesi.
Fase6: Nellinterfaccia di impostazione del router, passare alla pagina di configurazione delle regole di inoltro
porta (o server virtuale).
Nota: Lassegnazione del nome di inoltro porta o del server virtuale varia in relazione alla marca del
brands. Per conoscerne la posizione, consultare il manuale utente del router.
Quindi inserire lindirizzo IP e il numero di porta annotato nella Fase 3 e attivare questa regola.
Il router D-Link un esempio:
Andare su AVANZATE INOLTRO PORTA".
Indirizzo IP:
Porte da aprire:
Nota: Per informazioni sullinstallazione, fare riferimento al manuale utente del registratore video.
Fase1: Collegare il ricevtore video allhub o modem con un cavo di rete RJ45, simile al seguente:
Porta WAN
Registratore video
Hub
Modem
(opzionale)
Fare clic col tasto destro del mouse per visualizzare il menu principale e selezionare
WAN
LAN
DDNS
TIPO RETE
DHCP
IP
192.168.1.112
GATEWAY
192.168.1.254
NETMASK
255.255.255.0
DNS PRIMARIO
168.095.1.1
DNS SECONDARIO
139.175.55.244
PORTA
88
www.google.com
USCITA
Rete RETE.
AVANZA NELLA CONFIG.
CANERA
RILEVAMENTO
AVVISO
RETE
VISUALIZZA
REGISTRA
REMOTO
RETE
SNTP
FTP
DDNS
TIPO RETE
DHCP
IP
192.168.001.010
GATEWAY
192.168.001.254
NETMASK
255.255.255.000
DNS PRIMARIO
168.095.001.001
DNS SECONDARIO
139.175.055.244
PORTA
0080
USCITA
Fase3: (Opzionale) Se in Rete -> WAN viene visualizzato INDIRIZZO DISPONIBILIT INTERNET,
assicurarsi che sia stato inserito un indirizzo valido per il proprio paese, ad esempio www.google.com,
per aiutare il registratore a adeterminare se limpostazione di rete andata a buon fine o meno una volta
completata limpostazione.
Fase4: Selezionare STATICO, PPPOE o DHCP in relazione al tipo di rete e cambiare il numero di porta
se necessario.
Per STATICO, inserire le informazioni dellindirizzo IP statico, gateway e net mask dallISP, quindi passare direttamente
alla sezione successiva Verificare la connessione con Internet Explorer per verificare limpostazione.
Per PPPOE, inserire lindirizzo DNS, nome utente e password dallISP, assegnare un numero di porta (se necessario) e
passare alla Fase 4 per continuare.
Nota: Il numero porta predefinito 80. Tipicamente la porta TCP usata dal protocollo HTTP 80.
Tuttavia, in alcuni casi, meglio cambiare questo numero di porta per una maggiore flessibilit
o protezione.
Per DHCP, passare alla Fase 4 per continuare.
Fase5: (Solo PPPOE e DHCP) Andare su DDNS e selezionare eagleeyes in NOME SISTEMA.
Annotare lindirizzo in INDIRIZZO HOST CORRENTE", ad esempio
MAC000E5318B3F0.ddns.dvrtw.com.tw. Sar lindirizzo usato per accedere da remoto al registratore
video.
AVANZA NELLA CONFIG.
CONNESSIONE
CAMERA
RILEVAMENTO
AVVISO
RETE
VISUALIZZA
REGISTRA
WAN
LAN
DDNS
DDNS
ACCESO
NOME SISTEMA
eagleeyes
NOME HOST
MAC000E5318B3F0
VUOTO
USCITA
MAC000E5318B3F0.ddns.dvrtw.com.tw
Se presenti, controllare le icone nella barra di stato del registratore e assicurarsi che sia presente
contrario, partire nuovamente dalla Fase 1.
. In caso