Professional Documents
Culture Documents
BS
01
Block No./Name :
WS
BF
Blk
36.77
11.00
87.12
Structural System
1
SS
39.35
Add
Area (m)
(b)
% Area
(c)
Buildable Design
Score
(a) x (c) x 45
2090.10
68094.80
13618.96
43212.78
1.65%
53.61%
10.72%
34.02%
0.56
19.30
3.38
10.72
1.00
0.90
0.80
0.85
0.75
0.90
0.90
0.90
0.70
0.70
Full precast
1.1
1.2 (a) Precast column/wall with flat plate and perimeter beams (beam depth 600mm)
1.2 (b) Precast column/wall with flat plate and perimeter beams (beam depth > 600mm)
1.3 (a) Precast column/wall with flat slab and perimeter beams (beam depth 600mm)
1.3 (b) Precast column/wall with flat slab and perimeter beams (beam depth > 600mm)
Precast beam and precast slab
1.4
Precast beam and precast column/wall
1.5
Precast column/wall and precast slab
1.6
Precast slab only
1.7
Precast column/wall only
1.8
STRUCTURAL STEEL SYSTEM (applicable only if steel decking or precast slab is adopted)
Steel beam and steel column (without concrete encasement)
2.1
Steel beam and steel column (with concrete encasement)
2.2
see Note 1
1.00
0.95
0.85
0.75
0.80
0.70
0.70
0.45
3.1 (a) Flat plate with perimeter beams (beam depth 600mm)
3.1 (b) Flat plate with perimeter beams (beam depth > 600mm)
3.2 (a) Flat slab with perimeter beams (beam depth 600mm)
3.2 (b) Flat slab with perimeter beams (beam depth > 600mm)
One-directional beam
3.3
Two-directional beam
3.4
ROOF SYSTEM
Integrated metal roof on steel truss
4.1
Metal roof on steel truss or timber truss
4.2
Tiled roof on steel beam or precast concrete beam or timber beam
4.3
Metal roof on cast in-situ beam
4.4
Tiled roof with cast in-situ beam
4.5
127016.64
1.00
0.95
0.75
0.60
0.55
OTHER STRUCTURAL SYSTEMS NOT LISTED IN BDAS (Please seek BCAs advice on the LSI before proceeding)
5.1
5.2
5.3
127016.64
100.00%
33.95
Percentage of coverage
(b)
Buildable Design
Score
(a) x (b) x 45
0.05
0.05
0.05
0.05
80.00
80.00
80.00
1.80
1.80
1.80
5.40
39.35
7 BONUS POINTS
7.1
0.50
7.2(b) Mechanical connection for precast beam joints ( 65%) see Note 4
0.50
7.2(c) Mechanical connection for vertical precast wall joints ( 65%) see Note 4
2.00
see Note 5
7.4
7.5
see Note 6
Buildable Design
Score
3.00
7.2(a) Mechanical connection for precast column joints ( 65%) see Note 4
7.3
Percentage of coverage
1.00
2.00
2.00
8 OTHER BONUS POINTS NOT LISTED IN BDAS (Please seek BCA's advise before proceeding)
8.1
8.2
8.3
BPD_BS01
[Ver_Nov_2014] - to be used only for projects submitted for planning approval on and after 1st Nov 2014
0.00
Page 1
39.35
BS
SS
WS
BF
Blk
39.35
36.77
11.00
87.12
BlockNo./Name:
No./Name :___________________________________________
Block
01 Please indicate other typical blocks (if any): _________________________________________________
Labour Saving
Index
(a)
Wall System
% Length
(External
+
Internal)
(d)
Buildable Design
Score
(a) x (d) x 40
1.00
see Note 3
1.00
2.2
Prefabricated Railing
1.00
1.00
0.90
1.00
3.2
0.90
3.3
0.60
see Note 1
4.1
0.85
1796.95
18.72%
6.37
4.2
0.55
576.64
6.01%
1.32
7224.03
75.27%
24.09
0.95
5.2
0.80
5.3
0.50
PRECISION BLOCKWALL
see Note 2
6.1
0.30
6.2
0.10
BRICKWALL / BLOCKWALL
7.1
MANDATORY ITEMS
1.1
see Note 4
OTHER WALL SYSTEMS NOT LISTED IN BDAS (Please seek BCA's advice on the LSI before proceeding)
8.1
8.2
8.3
0.00
Total Wall Length (External Wall Length and Internal Wall Length)
9597.62
100.00%
9597.62
31.77
10
Direct Points
Awarded
Scenario based on
Total height of
Max Offset (m) OR Buildable Design
Total height of Building (m)
all voids
Score
% of Offset floors in
(m)
Table B
9.1
See Table A
0.00
9.2
See Table B
N.A
53.95
N.A
2.00
53.95
1.00
Sub-total Bonus for Simple Design (B2)
(maximum 5 points)
Percentage of coverage
3.00
5.00
Buildable Design
Score
10.1
10.2
10.3
0.00
36.77
SS
WS
BF
Blk
39.35
36.77
11.00
87.12
01
Block No./Name :
Buildable Features
1
BS
Percentage of Coverage
Module
70% - <90%
90%
% of Coverage
Buildable Design
Score
MANDATORY ITEMS
BPD_BS01
[Ver_Nov_2014] - to be used only for projects submitted for planning approval on and after 1st Nov 2014
Page 2
2.00
2.00
0.50
1.50
0.50
1.00
1.00
2.00
1.00
2.00
83.00
1.00
1.50
1.50
0.75
0.75
2.00
2.00
1.00
1.00
90.30
75.00
70.00
70.00
2.00
1.50
0.75
0.75
1.50
0.75
1.50
0.75
1.50
2.00
1.00
2.00
1.00
2.00
80.00
0.75
85.30
75.00
0.75
1.50
1.00
0.50
0.50
1.50
2.00
1.00
1.00
3.00
80.00
0.50
1.00
2.00
Percentage of Coverage
Repetition of
Layouts
65% - <80%
80%
40
5.00
6.00
< 40
3.00
4.00
N.A
2.00
3.00
9.50
% of Coverage
Buildable Design
Score
% of Coverage
Buildable Design
Score
80.00
1.50
see Note 4
PBU system:
Prefabricated bathroom/toilet units pre-assembled off-site complete with finishes,
OR A.1(b) piping / wiring - in nos.
A.2
A.3
N.A
N.A
Bonus Points
Module
INDUSTRY STANDARDISATION
Typical storeys standardised to either 2.8m, 2.975m, 3.15m, 3.3m, 3.5m, 3.6m, 4.2m,
A.4 4.5m, 4.55m, 4.8m or 4.9m height and with precast staircase of riser height of 150mm
or 175mm & tread width of 250mm or 275mm
A.5
A.6
A.7
see Note 1
see Note 2
see Note 3
A.8
see Note 5
(3 most common sizes) - in nos.
FINISHES & DRY CONSTRUCTION
A.9 Drywall for party wall - in nos.
(applicable for residential projects only)
Drywall for wet areas (kitchens and toilets) - in nos.
A.10
(applicable for residential projects only)
Engineered timber flooring - in areas.
A.11
(applicable for residential projects only)
A.12 Carpet, vinyl and raised floor - in areas
A.13 Engineered stone flooring finishes - in areas.
MECHANICAL, ELECTRICAL AND PLUMBING (MEP) SYSTEMS
Prefabricated and pre-insulated duct for air- conditioning system
A.14
see Note 8
(for central air conditioning system only) - in areas
A.15 Flexible sprinkler dropper - in nos.
A.16 Flexible water pipes - in nos.
A.17 Common M&E tray (at least 3 M&E services) - in length
MODERN CONSTRUCTION SYSTEM
BPD_BS01
[Ver_Nov_2014] - to be used only for projects submitted for planning approval on and after 1st Nov 2014
1.00
2.00
1.00
2.00
Percentage of Coverage
65% - <80%
80%
N.A
1.00
2.00
N.A
0.50
1.50
N.A
0.50
1.00
N.A
1.00
2.00
N.A
1.00
2.00
N.A
2.00
4.00
N.A
1.50
3.00
N.A
1.00
2.00
N.A
N.A
1.00
1.00
2.00
2.00
N.A
2.00
4.00
N.A
N.A
N.A
1.00
2.00
0.50
1.00
1.00
2.00
Direct Points Awarded
% of Coverage
6.00
3.00
Page 3
Sub-total for Single Integrated Components and Bonus Points for Buildable Features (D)
(maximum 20 points)
Demerit Points
B.1
Module
Point deduction
N.A
-1.00
1.50
Buildable Design
Score
Percentage of coverage
Point
deduction
per floor
N.A
< 30%
-1.00
N.A
-1.50
N.A
60%
-2.00
N.A
< 30%
-2.00
N.A
-2.50
N.A
60%
-3.00
N.A
< 30%
-1.00
N.A
30%
No. of
floors
-1.50
0.00
Percentage of coverage
Point deduction
N.A
< 20%
-2.00
N.A
20%
-3.00
0.00
0.00
0.00
87.12
GRAND TOTAL (A + B + C + D+ E)
(maximum 100 points)
All notes to refer to Explanatory Notes under Buildable Features System.
BPD_BS01
[Ver_Nov_2014] - to be used only for projects submitted for planning approval on and after 1st Nov 2014
Page 4