Professional Documents
Culture Documents
Title:
Other Special Structure Mold
Page
No.:
Moldmaking Guide
Created by: ****
Approved by:
****
1/5
145
Rev.: A
Last Modified:
3.25.05
Direct sprue
gate used
Notes:
1.the ejector plate can be
driven by chains,cylinder
or other method;
2.the enough e.j. stroke.
Kwik-mold is dedicated to building tools that enable you to mold high-quality part quickly and profitably
Kwik-Mold Inc.
Title:
Other Special Structure Mold
Page
No.:
Moldmaking Guide
Created by: ****
Approved by:
****
2/5
146
Rev.: A
Last Modified:
3.25.05
1.the spring can be used for the drive force for the small part.
Kwik-mold is dedicated to building tools that enable you to mold high-quality part quickly and profitably
s
Kwik-Mold Inc.
Title:
Other Special Structure Mold
Page
No.:
Moldmaking Guide
Created by: ****
Approved by:
****
3/5
147
Rev.: A
Last Modified:
3.25.05
3. MUD mold
The cavity(core) blocks,e.j.( retainer) plates are mounted on the standardized
moldbase provided by customer.
Notes:
1. Dim D per moldbase specification;
2. two or four special support pillars is designed as the guide pins and the stop
pins.(additional support pillar may be added as needed);
3. special care to Dim C and H to suit the press;
4. try to place the IN and OUT of waterlines on the top side of mold.
Kwik-mold is dedicated to building tools that enable you to mold high-quality part quickly and profitably
Title:
Other Special Structure Mold
Kwik-Mold Inc.
Page
No.:
Moldmaking Guide
Created by: ****
Approved by:
****
4/5
148
Rev.: A
Last Modified:
3.25.05
Uframe
H frame
Kwik-mold is dedicated to building tools that enable you to mold high-quality part quickly and profitably
Kwik-Mold Inc.
Title:
Other Special Structure Mold
Page
No.:
Moldmaking Guide
Created by: ****
Approved by:
****
5/5
149
Rev.: A
Last Modified:
3.25.05
Double H frame
Kwik-mold is dedicated to building tools that enable you to mold high-quality part quickly and profitably