Professional Documents
Culture Documents
SH-0120B(LA)
This shampoo delivers a pleasing slippery feel and combability to wet hair. Sensomer* 10M conditioning polymer provides smooth feel and Glucamate* LT
thickener increases the viscosity of the formula without the addition of salt. Quickpearl* EGL pearlizing agent contributes an elegant pearlescent appearance.
Carbopol* Ultrez 20 polymer decreases processing time, due to its fast dispersion, and contributes to the stability of the formulation.
C.
D.
Function
1.
Deionized Water
50.37
2.
Disodium EDTA,
Versene NA
0.10
Chelating Agent
3.
0.25
Rheology Modifier
4.
5.
B.
Weight %
Diluent
18.25
Surfactant
0.60
Neutralizer
6.
Cocamide MEA,
Amidex* CME Surfactant
2.00
Surfactant /
Thickener
7.
3.33
Surfactant
8.
0.40
Emollient
9.
4.00
Pearlizing Agent
10.
Deionized Water
11.
Polyquaternium-10,
Sensomer* 10M Polymer
0.30
Conditioning Agent
12.
Methylchloroisothiazolinone (and)
Methylisothiazolinone,
Euxyl K 120
0.05
Preservative
13.
0.15
Thickener
14.
Fragrance,
Hair Line 32
0.20
Fragrance
20.00
Diluent
Product Properties:
Appearance
pH
6.3 6.8
Viscosity (mPas)**
6,000 10,000
10.12
Supplier References:
Dow (2)
Lubrizol Advanced Materials, Inc. (3, 4, 6, 7, 8, 9,
11, 13)
Schlke & Mayr (12)
Givaudan (14)
SH-0120B(LA)
Based on SH-0120(LA)
Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000
PART A: In a suitable mixing vessel add Disodium EDTA to water and mix until solubilized. Add
Carbopol* Ultrez 20 polymer by sprinkling on the surface of water without mixing.
2.
3.
Add Sulfochem* ES-2PK surfactant with gentle mixing. Mix until uniform.
4.
Neutralize batch to pH 6.3 - 6.8 with Sodium Hydroxide (18%). Mix until uniform.
5.
Begin heating to 75 C. At 70 C add Amidex* CME surfactant with mixing. Mix until the
ingredient has fully melted. Keep heating.
6.
Maintain temperature between 70 C 75 C for 5 minutes to ensure all ingredients are melted and
homogenous.
7.
8.
When PART A has cooled to 45 C, add ingredient 7, 8, 9 with mixing. Mix until uniform.
9.
PART C.: In a separate vessel, slowly sift Sensomer* 10M polymer into Deionized Water. Heat
to 40 C. Mix until uniform. Add PART C into main vessel with mixing. Mix until uniform.
SH-0120B(LA)