PQ oR
oN ML
STOCK PARTS
12inch steering wheel
Steering shaft, arm;
steering blocks
13:nch tie rods (2);
spherical rod ends (4)
‘inch left and right front
spindle brackets
14inch balloon tires, rim
‘and hub, front (2)
Pedals, 60:inch brake and
thot cables, wire stops
Seat; seatbelt
Linch balloon tires, rim
and hub, rear (2)
Bearing kits: hanger, two
cassettes, bearing (2)
4inch brake drum and
Linch brake band
1.x 36-inch rear axle
UniHub for Linch axle
No, 41 54T sprocket
Soot No. 41 chain
12x 5inch motor mount
Chain guard
Linch No, 41 clutch
Engine (Erd used a @-hp
Tecumseh)
Kileswiteh kit
Nes 7
—_,
FRAME METAL, DIMENSIONS
12 feet of 1 x 2-inch 14-gauge steel tubing. Straight cuts at
24, 26, 10 and 10 inches. Angled cuts: two pieces cut at
25\sinch (long face) and 23:nch (short face). Two pieces
Cut to 12 inches and angled at one end for seat support and
steering posts
6 feet of 1x Linch 14 gauge steel tubing. Angled cuts: two
pieces cut at 26.nch (long face), 24¥sinch (short face)
‘inch steel sheet. Use two 2 x 4-inch pieces to mount the
seal and steering posts. Cut pieces of 1-gauge steel sheet
for floorboards.
5 feet of 2x 3-inch 14-gauge steel tubing, square-cut to
56 inches for central frame support.