Professional Documents
Culture Documents
DSR REPORT
Name
Year
2014-2015
Rate Card
Effective Date
16/05/2014
Chapter Name
Earth Work
Rate In (Rs.)
Item Description
1-2-1
80966 1-2-1-1
1-2-2
80967 1-2-2-1
1-2-3
Unit
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m
in
width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and
lift
upto 1.5 m, disposed soil to be levelled and neatly dressed.
Earth work in excavation in all kinds of soils.
38.400
sq.m
293.000
cu.m
182.500
cu.m
2.200
cu.m
11.600
cu.m
Earth work in rough excavation, banking excavated earth in layers not exceeding 20
cm in depth, breaking clods watering, rolling each layer with tonne roller or
wooden or steel rammers, and rolling every 3rd and top-most layer with power roller
of minimum 8 tonnes and dressing up in embankments for roads, flood banks,
marginal banks and guide banks or filling up ground depressions, lead upto 50 m
and lift upto 1.5 m
Earth work in rough excavation, banking excavated earth, breaking clods, watering
& rolling in all Kinds of soil.
Banking excavated earth in layers not exceeding 20 cm. in depth, breaking clods,
watering, rolling each layer with tonne roller, or wooden or steel rammers, and
rolling
every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing
up, in
embankments for roads, flood banks, marginal banks, and guide banks etc., lead
upto
50 m and lift upto 1.5 m.
80968 1-2-3-1
Banking excavated earth in layers not exceeding 20 cm. in depth (all kinds of soils)
80969 1-2-4
Deduct for not rolling with power roller of minimum 8 tonnes for
banking excavated earth in layers not exceeding 20 cm in depth.
80970 1-2-5
1-2-6
Rate
Page 1 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
80971 1-2-6-1
1-2-7
Rate
Unit
221.800
cu.m
80972 1-2-7-1
Ordinary rock
303.900
cu.m
80973 1-2-7-2
592.400
cu.m
80974 1-2-7-3
649.200
cu.m
224.700
cu.m
1-2-8
80975 1-2-8-1
1-2-9
80976 1-2-9-1
Ordinary rock
323.000
cu.m
80977 1-2-9-2
683.000
cu.m
80978 1-2-9-3
662.500
cu.m
1-2-10
Excavating trenches of required width for pipes, cables, etc including excavation for
sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including
getting
out the excavated soil and then returning the soil as required, in layers not exceeding
20
cm in depth including consolidating each deposited layer by ramming, watering, etc.
and disposing of surplus excavated soil as directed, within a lead of 50 m :
1-2-10-1
80979 1-2-10-1-1
146.300
metre
80980 1-2-10-1-2
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
238.900
metre
80981 1-2-10-1-3
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.
373.000
metre
Page 2 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
80982 1-2-11
Extra for excavating trenches for pipes, cables etc. in all kinds of soil
for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
317.100
metre
80983 1-2-12
Extra for excavating trenches for pipes, cables, etc, in all kinds of
soil for depth exceeding 3 m in depth, but not exceeding 4.5 m.
(Rate is over corresponding basic item for depth upto 1.5 metre.)
808.900
metre
1-2-13
Excavating trenches of required width for pipes, cables, etc, including excavation for
sockets, depth upto 1.5 m including getting out the excavated materials, returning
the
soil as required in layers not exceeding 20 cm in depth including consolidating each
deposited layers by ramming, watering etc. stacking serviceable material for
measurements and disposal of unserviceable material as directed, within a lead of
50m :
1-2-13-1
Ordinary rock
80984 1-2-13-1-1
196.000
metre
80985 1-2-13-1-2
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
485.200
metre
80986 1-2-13-1-3
Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia
558.400
metre
1-2-13-2
80987 1-2-13-2-1
366.900
metre
80988 1-2-13-2-2
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
908.400
metre
80989 1-2-13-2-3
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia.
1,045.400
metre
1-2-13-3
80990 1-2-13-3-1
357.200
metre
80991 1-2-13-3-2
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
884.400
metre
80992 1-2-13-3-3
1,017.800
metre
80993 1-2-14
1,812.200
metre
80994 1-2-15
2,222.900
metre
1-2-16
80995 1-2-16-1
122.700
sq.m
80996 1-2-16-2
129.900
sq.m
Page 3 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
80997 1-2-16-3
1-2-17
Rate
Unit
129.000
sq.m
Close timbering in case of shafts, wells, cesspits, manholes and the like including
strutting, shoring and packing cavities (wherever required) etc. complete.
(Measurements to be taken of the face area timbered).
80998 1-2-17-1
128.700
sq.m
80999 1-2-17-2
139.500
sq.m
81000 1-2-17-3
151.900
sq.m
1-2-18
Close timbering over areas including strutting, shoring and packing, cavities
(wherever required) etc. complete. (Measurements to be taken of the face area
timbered):
81001 1-2-18-1
111.000
sq.m
81002 1-2-18-2
117.200
sq.m
81003 1-2-18-3
124.200
sq.m
81004 1-2-19
Extra for planking, strutting and packing materials for cavities (in
close timbering) if required to be left permanently in position. (Face
area of timber permanently left to be measured).
1,660.700
sq.m
1-2-20
81005 1-2-20-1
63.700
sq.m
81006 1-2-20-2
67.100
sq.m
81007 1-2-20-3
72.700
sq.m
1-2-21
Open timbering in case of shafts, wells, cesspits, manholes and the like including
strutting and shoring complete (Measurements to be taken of the face area
timbered)
81008 1-2-21-1
54.300
sq.m
81009 1-2-21-2
59.600
sq.m
81010 1-2-21-3
66.500
sq.m
1-2-22
81011 1-2-22-1
36.600
sq.m
81012 1-2-22-2
40.300
sq.m
81013 1-2-22-3
46.300
sq.m
81014 1-2-23
843.600
sq.m
Page 4 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-2-24
Rate
Unit
Extra rates for quantities of works, executed: (The extra percentage rate is applicable
in respect of each item but limited to quantities of work executed in these
difficult conditions).
81015 1-2-24-1
In or under water and/ or liquid mud, including pumping out water as required.
0.000
metre
81016 1-2-24-2
0.000
metre
81017 1-2-25
84.900
cu.m
1-2-26
81018 1-2-26-1
35.200
cu.m
81019 1-2-26-2
63.100
cu.m
81020 1-2-27
1,102.300
cu.m
9.500
sq.m
9.400
sq.m
1-2-28
81021 1-2-28-1
1-2-29
81022 1-2-29-1
1-2-30
Surface dressing of the ground including removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.
All kinds of soil.
Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same.
All kinds of soil.
Excavating holes upto 0.5 cum including getting out the excavated soil, then
returning the soil as required in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering etc, disposing of surplus
excavated soil; as directed within a lead of 50 m and lift upto 1.5 m.
81023 1-2-30-1
116.800
each
81024 1-2-30-30-2
Ordinary rock
164.100
each
81025 1-2-30-30-3
368.300
each
81026 1-2-30-30-4
358.100
each
81027 1-2-31
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and
saplings of girth upto 30 cm measured at a height of 1 m above ground level and
removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
4.900
sq.m
81028 1-2-32
Clearing grass and removal of the rubbish upto a distance of 50 m outside the
periphery of the area cleared.
2.500
sq.m
150.700
each
1-2-33
81029 1-2-33-1
Felling trees of the girth (measured at a height of 1 m above ground level) including
cutting of trunks and branches removing the roots and stacking of serviceable
material and disposal of unserviceable material.
Beyond 30 cm girth upto and including 60 cm girth
Page 5 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
81030 1-2-33-2
81031 1-2-33-3
81032 1-2-33-4
1-2-34
81033 1-2-34-1
each
3,067.500
each
6,156.500
each
328.500
litre
49.200
metre
55.700
metre
283.700
sq.m
70.700
metre
1-2-35-1
Along external wall where the apron is not provided using chemical emulsion @
7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm
including excavation channel along the wall & rodding etc. complete
1-2-35-2
81035 1-2-35-2-1
1-2-35-3
81036 1-2-35-3-1
1-2-35-4
81037 1-2-35-4-1
1-2-35-5
Unit
664.800
1-2-35
81034 1-2-35-1-1
Rate
81038 1-2-35-5-1
189.200
metre
81039 1-2-36
Deduct for disposed soil not levelled and neatly dressed (against item No.
2.6,&2.7)
25.800
cu.m
81040 1-2-37
Supply and Stacking of fly ash conforming to IRC-58 at Site including carriage,
loading, unloading & stacking up to any lead (measured stacks will be reduced by
20% for Payment)
0.000
cu.m
Filling with available fly ash and earth (excluding rock) in trenches or embankment
in layers (each layer should not exceed 15 cm), with intermediate layer of
compacted
earth(Soil
density- of 98%) after every four layers of compacted depth of
Building Works Based On CPWD
skeleton
- 2014-2015
Page 6 of 184
fly
ash,
sides
&
Top
layer
of filling shall be done with earth having total minimum
16/05/2014 - 1-2
compacted thickness 30 cm or as decided by Engineer-in-charge, including
compacting each layer by rolling/ ramming and watering, all complete as per
drawing and direction of Engineer-in-change.
0.000
cu.m
81041 1-2-38
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
compacted earth(Soil density of 98%) after every four layers of compacted depth of
fly ash, sides & Top layer of filling shall be done with earth having total minimum
compacted thickness 30 cm or as decided by Engineer-in-charge, including
compacting each layer by rolling/ ramming and watering, all complete as per
drawing and direction of Engineer-in-change.
Specification:
Page 7 of 184
16/07/15 12:42
Rate Card
Chapter Name
Mortars
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81042 1-3-1
9,292.500
cu.m
81043 1-3-2
6,839.300
cu.m
81044 1-3-3
5,614.200
cu.m
81045 1-3-4
4,570.600
cu.m
81046 1-3-5
4,008.700
cu.m
81047 1-3-6
3,527.000
cu.m
81048 1-3-7
8,105.700
cu.m
81049 1-3-8
5,670.400
cu.m
81050 1-3-9
4,626.800
cu.m
81051 1-3-10
4,064.900
cu.m
81052 1-3-11
3,583.200
cu.m
81053 1-3-12
7,625.600
cu.m
81054 1-3-13
7,716.700
cu.m
81055 1-3-14
4,996.900
cu.m
81056 1-3-15
13,623.200
cu.m
81057 1-3-16
11,032.300
cu.m
81058 1-3-17
7,689.600
cu.m
81059 1-3-18
Mud mortar
535.500
cu.m
81060 1-3-19
Specification:
Mortar in lime, Surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5
0.000
cu.m
Page 8 of 184
16/07/15 12:42
Rate Card
Chapter Name
Concrete Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-4-1
Rate
Unit
Providing and laying in position cement concrete of specified grade excluding the
cost of centring and shuttering -All work upto plinth level
81061 1-4-1-1
9,220.400
cu.m
81062 1-4-1-2
7,262.300
cu.m
81063 1-4-1-3
6,641.800
cu.m
81064 1-4-1-4
5,944.900
cu.m
81065 1-4-1-5
5,864.700
cu.m
81066 1-4-1-6
4,995.500
cu.m
81067 1-4-1-7
4,966.800
cu.m
81068 1-4-1-8
4,529.300
cu.m
81069 1-4-1-9
4,500.600
cu.m
81070 1-4-1-10
4,156.300
cu.m
81071 1-4-1-11
4,118.600
cu.m
81072 1-4-1-12
1:2:3.5:9 (1 ordinary portland cement : 2 Fly ash : 3.5 coarse sand : 9 graded
stone aggregate 40 mm nominal
size).
4,654.300
cu.m
81073 1-4-1-13
4,238.900
cu.m
9,803.000
cu.m
1-4-2
81074 1-4-2-1
Providing and laying cement concrete in retaining walls, return walls (any thickness)
including attached pilasters, columns, piers, abutmets, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks,
plain window sills, fillets etc upto floor five level, excluding the cost of centring,
shuttering and finishing
1:1:2 (1 cement: 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
Page 9 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81075 1-4-2-2
7,844.800
cu.m
81076 1-4-2-3
7,224.400
cu.m
81077 1-4-2-4
6,527.500
cu.m
81078 1-4-2-5
6,447.300
cu.m
81079 1-4-2-6
5,578.100
cu.m
81080 1-4-2-7
5,549.400
cu.m
81081 1-4-2-8
4,095.900
cu.m
1-4-3
Centering shuttering including struttings, propping etc. and removal of form work
for
81082 1-4-3-1
184.200
sq.m
81083 1-4-3-2
328.400
sq.m
81084 1-4-3-3
413.900
sq.m
1-4-4
Providing and laying cement concrete in kerbs, steps and the like at or near ground
level excluding the cost of centring, shuttering and finishing.
81085 1-4-4-1
6,641.800
cu.m
81086 1-4-4-2
5,864.700
cu.m
1-4-5
Providing and fixing upto floor five level precast cement concrete string or lacing
courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers,
steps, stair cases, etc. including hoisting and setting in position with cement mortar
1:3 (1 Cement: 3 coarse sand), cost of required centring, shuttering and finishing
smooth with 6mm thick cement plaster 1:3 (1 Cement: 3 fine sand)
81087 1-4-5-2
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
9,756.600
cu.m
81088 1-4-5-3
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
8,979.100
cu.m
81089 1-4-5-1
0.000
cu.m
1-4-6
Providing and fixing at or near ground level precast cement concrete in kerbs,
edgings
etc. as per approved pattern and setting in position with cement mortar 1:3 (1
Cement:
3 coarse
sand) including
the -cost of required centring, shuttering and finishing
Building Works Based On CPWD
skeleton
- 2014-2015
Page 10 of 184
smooth
with
6mm
thick
cement
plaster 1:3 (1 cement: 3 fine sand) on exposed
16/05/2014 - 1-4
surfaces complete.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
3 coarse sand) including the cost of required centring, shuttering and finishing
smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed
surfaces complete.
81090 1-4-6-1
1-4-7
1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
8,406.600
cu.m
Providing and fixing upto floor five level precast cement concrete solid block
including hoisting and setting in position with cement mortar 1:3 (1 cement: 3
coarse
sand), cost of required centring, shuttering and finishing smooth with 6mm thick
cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete
81091 1-4-7-1
1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
11,184.800
cu.m
81092 1-4-7-2
10,407.700
cu.m
1-4-8
Providing and fixing upto floor five level precast cement concrete hollow block
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3
coarse
sand), cost of required centring, shuttering and finishing smooth with 6mm thick
cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete
81093 1-4-8-1
1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
10,055.900
cu.m
81094 1-4-8-2
1:3:6 (1 Cement:3 coarse sand:6 graded stone aggregate 20mm nominal size).
8,731.200
cu.m
81095 1-4-9
22,174.000
each
81096 1-4-10
308.200
sq.m
81097 1-4-11
376.900
sq.m
81098 1-4-12
Extra for providing and mixing water proofing material in cement concrete work @
1 kg per 50 kg of cement.
81099 1-4-13
133.700
sq.m
81100 1-4-14
Extra for concrete work in superstructure above floor V level for each
four floors or part thereof.
435.900
cu.m
Page 11 of 184
36.600 kilogram
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81101 1-4-15
Extra for laying concrete in or under water and/or liquid mud including cost of
pumping or bailing out water and removing slush etc. complete.
399.400
cu.m
81102 1-4-16
137.300
cu.m
81103 1-4-17
541.300
sq.m
81104 1-4-18
Extra for addition of synthetic polyster triangular fibre of length 12mm, effective
diameter of 10-40 microns and specific gravity of 1.34 to 1.40 in cement
concrete/RCC/Flooring/Water retaining structure by using 125 gms of synthetic
polyster triangular fibre for 50 kg cement used as per directions of engineer in
charge.(Rates are for per kg of cement)
1-4-19
Providing and laying in position ready mixed plain cement concrete, using fly ash
and cement content as per approved design mix and manufactured in fully automatic
batching plant and transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified grade for
plain cement concrete work, including pumping of R.M.C. from transit mixer to site
of laying and curing excluding the cost of centering, shuttering and finishing,
including cost of curing, admixtures in recommended proportions as per IS : 9103 to
accelerate / retard setting of concrete, improve workability, without impairing
strength and durability as per direction of the Engineer-in-charge.
NOTE :
(1) Excess/less Cement used than specified in this item is payable / recoverable
separately.
(2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part
replacement of OPC as per IS:456 Uniform blending with cement is to be ensured in
accordance with clau ; es 5.2 and 5.2.1 of IS: 456-2000 in the items of BMC and
RMC.
(3) The above item shall be used judiciously where specifed quality of Fly Ash is
available for mixing in concrere. Also , the guidelines issued by CDO, CPWD, Vide
circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be
followed in such cases.
1-4-19-1
1.100 kilogram
81105 1-4-19-1-1
M-15 grade plain cement concrete (Cement content cinsidered @ 240 kg/cum).
6,096.500
cu.m
81106 1-4-19-1-2
M-10 grade plain cement cincrete (cement content considered @ 220 kg/cum).
6,501.600
cu.m
1-4-19-2
81107 1-4-19-2-1
M-15 grade plain cement concrete. (cement content considered @ 240 kg./cum)
7,014.700
cu.m
81108 1-4-19-2-2
M-10 grade plain cement concrete. (cement content considered @ 220 kg./cum).
6,863.700
cu.m
1-4-20
Providing and laying in position ready mixed plain cement concrete, with cement
content as per apprved design mix and manufactured in fully automatic batching
plant and transported to site of work in transit mixer for all leads, having continuous
agitatedskeleton
mixer, -manufactured
mix desigb of specified grade for plan cement
Building Works Based On CPWD
2014-2015 - as perPage
12 of 184
concrete
work,
including
pumping
of
R.M.C. from transit mixer to site of laying and
16/05/2014 - 1-4
curing, excluding the cost of centering, shuttering and finishing, including cost of
curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard
setting of concrete, improve workability with out impairing strength and durability
as per direction of the Engineer-in-charge.
NOTE :
(1) Excess/less cement used than specified in this item is payable/recoverable
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
agitated mixer, manufactured as per mix desigb of specified grade for plan cement
concrete work, including pumping of R.M.C. from transit mixer to site of laying and
curing, excluding the cost of centering, shuttering and finishing, including cost of
curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard
setting of concrete, improve workability with out impairing strength and durability
as per direction of the Engineer-in-charge.
NOTE :
(1) Excess/less cement used than specified in this item is payable/recoverable
separately.
1-4-20-1
81109 1-4-20-1-1
6,606.200
cu.m
81110 1-4-20-1-2
M-10 grade plain cement concrete (cement content considered @ 220 kg/cum).
5,459.400
cu.m
1-4-20-2
81111 1-4-20-2-1
M-15 grade plain cement concrete (cement content considered @ 240 kg/cum).
6,930.400
cu.m
81112 1-4-20-2-2
Specification:
M-10 grade plain cement concrete (cement content considered @ 220 kg/cum).
6,741.600
cu.m
Page 13 of 184
16/07/15 12:42
Rate Card
Chapter Name
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-5-1
Rate
Unit
81113 1-5-1-1
9,422.200
cu.m
81114 1-5-1-2
7,464.100
cu.m
81115 1-5-1-3
6,843.600
cu.m
10,089.800
cu.m
1-5-2
81116 1-5-2-1
81117 1-5-2-2
8,131.700
cu.m
81118 1-5-2-3
7,511.200
cu.m
81119 1-5-3
7,441.700
cu.m
81120 1-5-4
7,112.400
cu.m
81121 1-5-5
7,254.100
cu.m
81122 1-5-6
7,586.800
cu.m
81123 1-5-7
6,665.000
cu.m
7,857.100
cu.m
81124 1-5-8
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Centring and shuttering including strutting,ropping etc. and removal of form for
81125 1-5-9-1
Centring and shuttering for foundations, footings, bases of columns, etc. for mass
concrete.
184.200
sq.m
81126 1-5-9-2
328.400
sq.m
81127 1-5-9-3
Centring and Shuttering for Suspended floors, roofs, landings, balconies and
access platform.
363.400
sq.m
81128 1-5-9-4
344.200
sq.m
81129 1-5-9-5
304.700
sq.m
81130 1-5-9-6
395.500
sq.m
81131 1-5-9-7
427.300
sq.m
81132 1-5-9-8
349.300
sq.m
81133 1-5-9-9
1,089.300
sq.m
81134 1-5-9-10
539.600
sq.m
81135 1-5-9-11
328.400
sq.m
81136 1-5-9-12
Well steining
576.400
sq.m
81137 1-5-9-13
Vertical and horizontal fins individually or forming box louvers band, facias and
eaves boards.
604.600
sq.m
81138 1-5-9-14
0.000
sq.m
81139 1-5-9-15
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window
sills, string courses, bands,
copings, bed plates, anchor blocks and the like.
184.200
sq.m
1-5-9-16
including
attached
81140 1-5-9-16-1
Under 20 cm wide
127.900
metre
81141 1-5-9-16-2
Above 20 cm wide
565.100
sq.m
81142 1-5-9-17
613.900
sq.m
81143 1-5-9-18
Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases
to pilasters and
columns and the like.
512.600
sq.m
81144 1-5-9-19
537.000
sq.m
Page 15 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81145 1-5-9-20
0.000
sq.m
81146 1-5-9-21
0.000
sq.m
1-5-10
Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete
as per the Engineer-in-charge
81147 1-5-10-1
141.700
each
81148 1-5-10-2
153.400
each
81149 1-5-10-3
169.000
each
81150 1-5-10-4
186.600
each
180.100
sq.m
1-5-11
Extra for additional height in centring, shuttering where ever required with adequate
bracing, propping etc. including cost of de-shuttering and decentring at all
levels,over a height of 3.5 m, for every additional height of 1 metre or part thereof
(Plan
area to be measured)
81151 1-5-11-1
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).
81152 1-5-12
9,898.800
cu.m
81153 1-5-13
11,516.100
cu.m
81154 1-5-14
12,984.600
Providing, hoisting and fixing up to floor five level precast
reinforced cement concrete in mouldings as in cornices, windows sills etc.
including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of
required centering, shuttering and finishing smooth with 6 mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but
excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size).
cu.m
81155 1-5-15
10,115.500
cu.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
13,089.500
cu.m
81157 1-5-17
13,383.100
cu.m
1-5-18
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire
including centring and shuttering, roughening cleaning, fixing and finishing in
cement mortar 1:3 (1 cement: 3 fine sand) etc.complete excluding plastering of
the jambs, sills and soffits.
81158 1-5-18-1
50 mm thick
682.700
sq.m
81159 1-5-18-2
40 mm thick
575.300
sq.m
81160 1-5-18-3
25 mm thick
557.500
sq.m
81161 1-5-19
10,017.900
cu.m
81162 1-5-20
0.000
cu.m
81163 1-5-21
371.000
sq.m
1-5-22
Page 17 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81164 1-5-22-1
Reinforcement for R.C.C. Work Using Mild Steel and Medium /Tensile Steel Bars
63.500 kilogram
81165 1-5-22-2
74.000 kilogram
81166 1-5-22-3
71.500 kilogram
81167 1-5-22-4
71.500 kilogram
81168 1-5-22-5
Reinforcement for R.C.C. Work Using Hard Drawn Steel Wire Fabric
69.000 kilogram
81169 1-5-22-6
71.500 kilogram
1-5-22-A
81170 1-5-22-A-1
68.400 kilogram
81171 1-5-22-A-2
72.700 kilogram
81172 1-5-22-A-3
0.000 kilogram
81173 1-5-22-A-4
0.000 kilogram
81174 1-5-22-A-5
81175 1-5-22-A-6
81176 1-5-23
Smooth finishing of the exposed surface with 6mm thick cement mortar 1:3 (1
Cement : 3 fine sand)
81177 1-5-24
81178 1-5-25
330.200 kilogram
81179 1-5-26
554.300
metre
81180 1-5-27
Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot
bitumen,1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints.
229.000
metre
81181 1-5-28
Providing and fixing in position 12mm thick bitumen impregnated fibre board
conforming to IS: 1838 including cost of primer, sealing compound in expansion
joints.
430.200
metre
1-5-29
Providing and fixing sheet covering over expansion joints with iron screws as per
design to match the colour /shade of wall treatment.
1-5-29-1
metre
81182 1-5-29-1-1
67.400 kilogram
0.000 kilogram
126.800
sq.m
93.400
sq.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
treatment.
Non-asbestos fibre cement board 6 mm thick as per
IS: 14862. 150mm wide.
81183 1-5-29-1-2
1-5-29-2
200mm wide.
153.300
metre
81184 1-5-29-2-1
150 mm wide.
330.800
metre
81185 1-5-29-2-2
200 mm wide
461.900
metre
81186 1-5-30
29.000
metre
81187 1-5-31
399.400
cu.m
81188 1-5-32
137.300
cu.m
81189 1-5-33
8,400.300
cu.m
95.500
cu.m
1-5-34
Add or deduct for providing richer or leaner mixes respectively at all floor levels.
81190 1-5-34-1
Providing M-30 grade concrete by using 420kg of Cement per cum of concrete
instead of M-25 grade B.M.C./Rmc.
81191 1-5-34-2
168.800
cu.m
81192 1-5-34-3
0.000
cu.m
81193 1-5-35
Deduct for using less cement than the quantity as provided in the
item of batch mix concrete/RMC as arrived as per mix design.
81194 1-5-36
932.400 Quintal
17,504.200 cu.m
Providing and placing in position precast reinforced cement concrete waffle
units square or rectangular as per design and shape for floors and roofs in 1:1.5:3
(1Cement : 1.5 coarse sand : 3 graded stone aggregate 10mm nominal size)
including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2
Fine sand), making necessary holes of required sizes for carrying through
service lines etc., providing steel hooks for lifting etc, form work in precasting,
handling,
hoisting,
centering- and Page
erection
Building Works Based On CPWD
skeleton
- 2014-2015
19complete
of 184 for all floor levels but
16/07/15 12:42
excluding the cost of reinforcement.
16/05/2014 - 1-5
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
handling, hoisting, centering and erection complete for all floor levels but
excluding the cost of reinforcement.
81195 1-5-37
81196 1-5-38
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each
four floors or part thereof.
81197 1-5-39
1-5-40
8,838.300
cu.m
218.400
cu.m
51.500
cu.m
Providing and laying in position ready mixed M-25 grade concrete for reinforced
cement concrete work, using fly ash and cement content as oer approved design mix
and manufactured in fully automatic batching plant and transported to site of work
in transit mixer for all leads, having continuous agitated mixer, manufactured as per
mix design of specified grade for reinforced cement concrete work, including
pumping of R.M.C. from transit mixer to site of laying, excluding the cost of
admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting
of concrete, improve workability without impaining strength and durability as per
direction of the Engineer-in-charge.
NOTE :- (1) Cement content considered in this item is @ 330 kg./cum. Excess/less
cement used as per design mix is payable/recoverable separately.
(2) Fly ash conforming to grade I of IS 456. Uniform blending with cement to be
ensured in accordance with clauses 5.2 and 5.2.1 of IS : 456-2000 in the items of
BMC amd RMC
(3) The above item shall be used judiciously where specified quality of Fly Ash is
available for mixing concrete. Also the guidelines issued by CDO,CPWD, vide
circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be
followed in Such cases.
81198 1-5-40-1
7,361.900
cu.m
81199 1-5-40-2
8,118.100
cu.m
1-5-41
Supplying and applying pre tested and approved water based concrete curing
compound to concrete/ masnory surface, all as per manufacturer's specification and
direction of Engineer-in-charge.
81200 1-5-41-1
0.000 kilogram
81201 1-5-41-2
0.000 kilogram
1-5-42
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
0.000
each
81203 1-5-42-2
334.000
each
81204 1-5-42-3
507.000
each
81205 1-5-42-4
0.000
each
81206 1-5-42-5
822.000
each
1-5-43
Providing and fixing in position Stainless Steel Grade 304 plate- 1.0 mm thick as per
design for expansion joints.
81207 1-5-43-1
200 mm wide.
0.000 kilogram
81208 1-5-43-2
Specification:
300 mm wide.
0.000 kilogram
Page 21 of 184
16/07/15 12:42
Rate Card
Chapter Name
Brick Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-6-1
Rate
Unit
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in
81209 1-6-1-1
6,891.300
cu.m
81210 1-6-1-2
6,624.900
cu.m
1-6-2
Brick work with modular bricks of class designation 75 in foundation and plinth in
81211 1-6-2-1
6,047.900
cu.m
81212 1-6-2-2
5,807.600
cu.m
1-6-3
Brick work with machine moulded perforated bricks of class designation 125
conforming to IS: 2222 -1991 in superstructure above plinth level upto floor five
level in cement mortar 1:6(1 cement : 6 coarse sand)
81213 1-6-3-1
7,587.600
cu.m
81214 1-6-3-2
7,266.400
cu.m
1-6-4
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth
level upto floor V level in all shapes and sizes in
81215 1-6-4-1
7,576.100
cu.m
81216 1-6-4-2
7,273.000
cu.m
81217 1-6-5
Extra for brick work in superstructure above floor V level for each four floors or
part thereof by mechanical means by lifting material using mobile crane.
368.100
cu.m
81218 1-6-6
Extra for forming cavity 5cm to 7.5cm wide in cavity walls with
necessary weep and vent holes including use of cores and cost
of providing and fixing bitumastic coated M .S. ties 300mm long
of 25x3mm section at not less than 3 ties per sqm as per
approved design.
102.800
sq.m
81219 1-6-7
249.900
metre
81220 1-6-8
622.700
sq.m
81221 1-6-9
10,200.200
cu.m
81222 1-6-10
11,876.400
cu.m
543.700
sq.m
81223 1-6-11
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Half brick masonry with F.P.S. bricks of class designation 75 in foundation and
plinth in
81224 1-6-12-1
846.400
sq.m
81225 1-6-12-2
812.400
sq.m
1-6-13
81226 1-6-13-1
912.700
sq.m
81227 1-6-13-2
878.800
sq.m
81228 1-6-14
32.600
sq.m
81229 1-6-15
Extra for providing and placing in position 2 Nos. 6mm dia. M.S.
bars at every third course of half brick masonry (with F.P.S.
bricks).
76.900
sq.m
1-6-16
Tile brick masonry with tite bricks of class designation 100 in foundation and plinth
in
81230 1-6-16-1
11,226.400
cu.m
81231 1-6-16-2
10,738.800
cu.m
81232 1-6-17
Tile brick masonry with machine moulded tile bricks of class designation 125
conforming to IS : 2690 (Part I) - 1993 in foundation and plinth in cement
mortar 1:6 (1 cement : 6 coarse sand).
9,121.200
cu.m
81233 1-6-18
Tile brick masonry with machine moulded tile bricks of class designation 125
conforming to IS : 2690 (Part I) - 1993 in superstructure above plinth level
up to floor V level. in cement
mortar 1:6 (1 cement : 6 coarse sand).
11,416.900
cu.m
81234 1-6-19
Extra for tile brick masonry with tile bricks of class designation
100 in superstructure above floor five level for every four floors or
part thereof.
435.900
cu.m
81235 1-6-20
14,083.000
Tile brick masonry with tile bricks of class designation 100 in plain arch work
in superstructure in cement mortar 1:4 (1 cement : 4 coarse sand) including
centering and shuttering complete.
cu.m
81236 1-6-21
Tile brick masonry with tile bricks of class designation 100 in gauged arch work in 15,588.400
superstructure in cement mortar 1:4 (1cement : 4 coarse sand) including centering
and shuttering complete.
cu.m
81237 1-6-22
645.900
sq.m
Page 23 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81238 1-6-23
563.900
sq.m
81239 1-6-24
Extra for laying brick work in or under water and/or liquid mud
including cost of pumping or bailing out water and removing slush
etc. complete.
399.400
cu.m
81240 1-6-25
137.300
cu.m
81241 1-6-29
Brick work with machine moudled F.P.S. bricks of class designation 125 in exposed
brick work including making horizontal and vertical grooves 10mm wide 12mm
deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement :
6 coarse sand).
7,001.200
cu.m
81242 1-6-30
Brick work with machine moudled perforated F.P.S. bricks of class designation 125
conforming IS : 2222-1991 in exposed brick work including making horizontal and
vertical grooves10mm wide 12 mm deep complete from ground level up to plinth
level in cement mortar 1:6 (1 cement : 6 coarse sand).
1,837.100
cu.m
81243 1-6-31
6,661.800
cu.m
1-6-32
Brick work with clay fly-ash F.P.S. brick of class designation 75 in superstructure
above plinth level upto floor five level in
81244 1-6-32-1
Brick work with clay fly ash F.P.S. brick of class designation 75 in super structure
above plinth level in Cement mortar 1:4(1 cement : 4 coarse sand)
3,612.900
cu.m
81245 1-6-32-2
Brick work with clay fly ash F.P.S. brick of class designation 75 in super structure
above plinth level in Cement mortar 1:6 (1 cement : 6 coarse sand)
3,309.900
cu.m
81246 1-6-33
435.900
cu.m
superstructure above floor five level, for each four floors or part
thereof.
1-6-34
Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:
128942002, class designation 100 average compressive strength in super structure above
plinth level upto floor V level in
81247 1-6-34-1
6,626.800
cu.m
81248 1-6-34-2
6,358.600
cu.m
1-6-35
Brick work with modular calcium silicate bricks machine moulded conforming to
IS:4139-1989, class designation 100 average compressive strength in super structure
above plinth level upto floor V level in
81249 1-6-35-1
5,204.200
cu.m
81250 1-6-35-2
4,927.900
cu.m
Page 24 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-6-36
Rate
Unit
Brick work with modular extruded burnt fly ash clay sewer bricks (Conforming to
IS: 4885 - 1988) in foundation and plinth
81251 1-6-36-1
4,957.700
cu.m
81252 1-6-37
Brick work with modular extruded brunt fly ash clay sewer bricks (conforming to
IS : 4885-1988) in arches in foundation and plinth n cement mortar 1:3 ( 1 cement :
3 fine sand).
8,207.100
cu.m
81253 1-6-38
6,203.600
cu.m
435.900
cu.m
81255 1-6-40
783.000
sq.m
81256 1-6-41
50.300
sq.m
1-6-42
Brick work with mechanised autoclaved flyash lime bricks conforming to I:S
12894 :
2002 of class designation 100 in superstructure above plinth level upto floor V
level in.
81257 1-6-42-1
4,898.900
cu.m
81258 1-6-42-2
4,597.000
cu.m
81259 1-6-43
435.900
cu.m
81260 1-6-44
54.200
metre
1-6-45
Half brick masonary with non modular fly ash lime Gypsum bricks (FALG bricks)
class designation 10, conforming to IS : 12894, in super structure above plinth and
upto floor V level.
81261 1-6-45-1
830.400
sq.m
81262 1-6-45-2
801.200
sq.m
Page 25 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-6-46
Rate
Unit
Half brick masnory wirh non modular mechanised auto claved fly ash sand lime
bricks class designation 10, conforming to IS : 12894, in super structure above
plinth and up to floor V level.
81263 1-6-46-1
644.300
sq.m
81264 1-6-46-2
615.000
sq.m
1-6-26
Brick work with common burnt clay selected F.P.S. (non modular) bricks of class
designation 7.5 in exposed brick work including making horizontal and
vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1
cement : 6 coarse sand)
81265 1-6-26-1
6,495.000
cu.m
81266 1-6-26-2
7,088.000
cu.m
1-6-27
Brick work with common burnt clay modular bricks of class designation 75 in
exposed brick work including making horizontal and vertical grooves 10 mm wide
12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).
81267 1-6-27-1
0.000
cu.m
81268 1-6-27-2
0.000
cu.m
1-6-28
Brick work with common burnt clay machine modular bricks of class designation
12.5 in exposed brick work including making horizontal and vertical grooves 10 mm
wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand ).
81269 1-6-28-1
0.000
cu.m
81270 1-6-28-2
Specification:
0.000
cu.m
Page 26 of 184
16/07/15 12:42
Rate Card
Chapter Name
Stone Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-7-1
Unit
Random rubble masonry with hard stone in foundation and plinth including
levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone
aggregate 20mm nominal size) at plinth level with
81271 1-7-1-1
81272 1-7-3
1-7-4
Rate
2,962.700
cu.m
581.200
cu.m
81273 1-7-4-1
378.100
cu.m
81274 1-7-4-2
Circular pillars.
948.000
cu.m
81275 1-7-5
332.400
cu.m
3,434.100
cu.m
3,206.500
cu.m
581.200
cu.m
424.600
cu.m
1,088.800
cu.m
367.200
cu.m
1-7-6
81276 1-7-6-1
1-7-7
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with
Cement mortar 1:6 (1 cement: 6 coarse sand)
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with
81277 1-7-7-1
81278 1-7-9
1-7-10
Extra for coursed rubble masonry with hard stone (first or second sort) in
81279 1-7-10-1
81280 1-7-10-2
Circular pillars.
81281 1-7-11
1-7-12
Stone work in plain ashlar in super structure upto floor five level in cement mortar
1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white
cement: 2 stone dust) with an admixture of pigment matching the stone shade
1-7-12-1
81282 1-7-12-1-1
28,314.800
cu.m
81283 1-7-12-1-2
29,066.800
cu.m
1-7-12-2
Page 27 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81284 1-7-12-2-1
36,379.600
cu.m
81285 1-7-12-2-2
37,161.400
cu.m
1-7-15
Stone work ashlar punched (ordinary) in superstructure upto floor five level in
cement mortar 1:6 (1 white cement: 6 coarse sand) including pointing with cement
mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching
the stone shade.
1-7-15-1
81286 1-7-15-1-1
1,35,870.
cu.m
81287 1-7-15-1-2
1,43,601.
cu.m
1-7-15-2
81288 1-7-15-2-1
1,42,363.
cu.m
81289 1-7-15-2-2
1,50,094.
cu.m
81290 1-7-16
581.200
cu.m
1-7-17
81291 1-7-17-1
1,788.900
cu.m
81292 1-7-18
1,244.400
cu.m
81293 1-7-19
543.700
sq.m
1-7-20
Stone work sunk or moulded or sunk and moulded upto floor five level in cement
mortar 1:6 (1 cement: 6 coarse sand) including pointing with white cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade
81294 1-7-20-1
40,410.000
cu.m
81295 1-7-20-2
41,191.900
cu.m
1-7-21
Extra for stone work sunk or moulded or sunk and mlded or carved in
81296 1-7-21-1
2,333.300
cu.m
81297 1-7-21-2
6,611.100
cu.m
81298 1-7-22
21.100
metre
1-7-23
Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including
pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture
of pigment matching the stone shade : (To be secured to the backing by means of
cramps which shall be paid for separately)
Building Works Based On CPWD skeleton - 2014-2015 Page 28 of 184
16/05/2014 - 1-7
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Red sand stone - exposed face fine dressed with rough backing.
81299 1-7-23-1-1
70 mm thick.
2,526.800
sq.m
81300 1-7-23-1-2
60 mm thick.
2,499.400
sq.m
81301 1-7-23-1-3
50 mm thick.
2,374.500
sq.m
81302 1-7-23-1-4
40 mm thick.
2,249.100
sq.m
81303 1-7-23-1-5
30 mm thick.
2,113.700
sq.m
1-7-23-2
Red sand stone - Exposed face machine cut and table rubbed with rough backing.
81304 1-7-23-2-1
70 mm thick
3,484.000
sq.m
81305 1-7-23-2-2
60 mm thick
3,326.700
sq.m
81306 1-7-23-2-3
50 mm thick
3,235.100
sq.m
81307 1-7-23-2-4
40 mm thick
3,109.200
sq.m
81308 1-7-23-2-5
30 mm thick
2,984.500
sq.m
1-7-23-3
White sand stone - exposed face fine dressed with rough backing .
81309 1-7-23-3-1
70 mm thick
2,666.900
sq.m
81310 1-7-23-3-2
60 mm thick.
2,404.000
sq.m
81311 1-7-23-3-3
50 mm thick.
2,402.400
sq.m
81312 1-7-23-3-4
40 mm thick.
2,269.300
sq.m
81313 1-7-23-3-5
30 mm thick.
2,137.100
sq.m
1-7-23-4
White sand stone - Exposed face machine cut and table rubbed with rough backing.
81314 1-7-23-4-1
70 mm thick.
3,538.700
sq.m
81315 1-7-23-4-2
60 mm thick.
3,394.500
sq.m
81316 1-7-23-4-3
50 mm thick.
3,274.200
sq.m
81317 1-7-23-4-4
40 mm thick.
3,178.600
sq.m
81318 1-7-23-4-5
30 mm thick.
3,009.000
sq.m
81319 1-7-24
1,788.900
cu.m
81320 1-7-25
Page 29 of 184
727.200 kilogram
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81321 1-7-26
38.100
each
81322 1-7-27
27.800
each
1,227.900
sq.m
1,271.400
sq.m
1-7-28
Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide
beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4
coarse sand) with 12mm diameter anchoring steel bar 45 cm long fixed in each
stone and supported on and including with bricks cove of class designation 75 in
cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade
1-7-28-1
81323 1-7-28-1-1
1-7-28-2
81324 1-7-28-2-1
1-7-29
81325 1-7-29-1
740.400
sq.m
81326 1-7-29-2
774.300
sq.m
81327 1-7-30
827.000
sq.m
81328 1-7-31
2,967.700
each
1-7-32
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75
mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with
white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment
matching the stone shade.
81329 1-7-32-1
25,826.200
cu.m
81330 1-7-32-2
26,333.800
cu.m
Page 30 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-7-33
Rate
Unit
Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1
cement : 3 coarse sand) including pointing in white cement mortar 1:2(1 white
cement: 2 stone dust) with an admixture of pigment, matching the stone shade, jali
slab without any chamfers etc.
81331 1-7-33-1
9,378.000
sq.m
81332 1-7-33-2
9,412.800
sq.m
81333 1-7-34
Extra for laying stone work in or under water and/or liquid mud including cost of
pumping or bailing out water and removing slush etc. complete.
399.400
cu.m
81334 1-7-35
137.300
cu.m
81335 1-7-36
Wall lining butch work upto 10m height with red/ white sand
stone 40 mm thick rough facing on the exposed surface with
stone strips of minimum length 300 mm and required width
including embedding every tenth layer and bottom most layer
in masonry or concrete after making necessary chases of
size 75x75mm and by providing layer of 75mm thick strips i/c
12mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse
sand) i/c ruled pointing in cement mortar 1:2 (1 white cement
: 2 stone dust) with an admixture of pigment to match the
shade of stone complete as per direction of Engineer-incharge.
1,461.600
sq.m
1,667.500
sq.m
1-7-37
Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer
work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3
coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust) including
rubbing and polishing complete. (To be secured to the backing by means of cramps
which shall be paid for separately)
1-7-37-1
81336 1-7-37-1-1
25 mm thick
1-7-38
Stone tile work for wall lining upto 10 m height with special adhesive over 12mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in
white cement with an admixture of pigment to match the stone shade.
1-7-38-1
81337 1-7-38-1-1
1,784.200
sq.m
81338 1-7-38-1-2
Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble.
1,479.700
sq.m
81339 1-7-39
Extra for stone work for wall lining on exterior walls of height
more than 10 m from ground level for every additional height
of 3 m or part there of.
129.300
sq.m
1-7-40
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw
cut stone with (machine cut edges) of uniform colour and size upto lmxlm, fixed to
structural steel frame work and/ or with the help of cramps, pins etc. and sealing
the joints with approved weather sealant as per Architectural drawing and
direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and
Building Works Based On CPWD
skeleton
Page 31 of 184
pins etc.
shall be- 2014-2015
paid for separately.)
16/05/2014 - 1-7
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and
pins etc. shall be paid for separately.)
81340 1-7-40-1
2,311.700
sq.m
81341 1-7-40-2
2,345.700
sq.m
81342 1-7-41
128.400 kilogram
81343 1-7-42
202.700
each
0.000
cu.m
1-7-2
81344 1-7-2-1
1-7-8
Random rubble masonry with hard stone in superstructure above plinth level
and upto floor five level, including leveling up with cement concrete 1:6:12 (1
cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at
window sills, ceiling level and the like.
Cement mortar 1:6 (1 cement : 6 coarse sand).
Extra for coursed rubble masonry with hard stone (first or second sort) in
superstructure above plinth level and upto floor five level.
81345 1-7-8-1
Masonry work (first sort), in cement mortar 1:6 ( 1 cement : 6 coarse sand)
0.000
cu.m
81346 1-7-8-2
Masonry work (Second sort), in cement mortar 1:6 ( 1 cement : 6 coarse sand)
0.000
cu.m
Page 32 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-7-13
Stone work plain ashlar in arches in super structure upto floor V level in cement
mortar 1:3 (1 cement :3 coarse sand) including centring, shuttering and pointing
with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment matching the stone shade.
1-7-13-1
Rate
Unit
81347 1-7-13-1-1
1,36,868.
cu.m
81348 1-7-13-1-2
1,44,599.
cu.m
1-7-13-2
81349 1-7-13-2-1
1,45,475.
cu.m
81350 1-7-13-2-2
1,50,527.
cu.m
1-7-14
Stone work plain ashiar in domas super structure upto floor V level in cement mortar
1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade.
1-7-14-1
81351 1-7-14-1-1
1,51,525.
cu.m
81352 1-7-14-1-2
1,59,056.
cu.m
1-7-14-2
81353 1-7-14-2-1
1,73,123.
cu.m
81354 1-7-14-2-2
Specification:
1,80,854.
cu.m
Page 33 of 184
16/07/15 12:42
Rate Card
Chapter Name
Marble Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-8-1
Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall
lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including
pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an
admixture of pigment to match the marble shade: (To be secured to the backing by
means of cramps, which shall be paid for separately).
1-8-1-1
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.
Rate
Unit
81355 1-8-1-1-1
2,557.100
sq.m
81356 1-8-1-1-2
2,688.300
sq.m
1-8-2
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and
prepolished) machine cut for kitchen platforms, vanity counters ,window sills ,
facias
and similar locations of required size of approved shade, colour and texture laid
over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints
treated with white cement, mixed with matching pigment, epoxy touch ups,
including
rubbing, curing moulding and polishing to edge to give high gloss finish etc.
complete
at all levels.
1-8-2-1
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.
81357 1-8-2-1-1
2,335.000
sq.m
81358 1-8-2-1-2
2,458.200
sq.m
1-8-2-2
81359 1-8-2-2-1
4,244.300
sq.m
81360 1-8-2-2-2
4,008.900
sq.m
1-8-3
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities
etc. including machine polishing to edge to give high gloss finish etc. complete as
per design approved by Engineer-in-Charge.
81361 1-8-3-1
Marble work
125.200
metre
81362 1-8-3-2
Granite work.
210.900
metre
81363 1-8-4
Extra for fixing marble /granite stone over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
based adhesive including cleaning etc. complete.
35.100
metre
81364 1-8-5
Extra for providing opening of required size & shape for wash basins/
kitchen sink in kitchen platform, vanity counters and similar location in
marble/Granite/stone work including necessary holes for pillar taps etc.
including rubbing and polishing of cut edges etc. complete.
361.200
each
180.700
sq.m
81365 1-8-6
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Providing and fixing cramps of required size & shape in RCC/ CC backing with
cement mortar 1:2(1 cement :2 coarse sand) including drilling necessary hole in
stones and embedding the cramp in the hole (fastener to be paid separately).
81366 1-8-7-1
Gunmetal cramps.
689.400 kilogram
81367 1-8-7-2
715.200 kilogram
1-8-8
Providing and fixing expansion hold fasteners on C.C. /R.C.C. surface backing
including drilling necessary holes and the cost of bolt etc complete.
1-8-8-1
81368 1-8-8-1-1
26.600
each
81369 1-8-8-1-2
28.100
each
81370 1-8-8-1-3
43.800
each
1-8-9
Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3
(1 cement: 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in
white cement complete.
1-8-9-1
8 mm thick.
81371 1-8-9-1-1
Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble.
1,571.400
sq.m
81372 1-8-9-1-2
1,973.700
sq.m
1-8-10
Providing and fixing 18 mm thick stone slab table rubbed, edges rounded and
polished
of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase
of
appropriate width with chase cutter and embedding the stone in the chase with
epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and
finished smooth.
81373 1-8-10-1
3,045.500
sq.m
81374 1-8-10-2
Specification:
3,787.100
sq.m
Page 35 of 184
16/07/15 12:42
Rate Card
Chapter Name
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-9-1
Rate
Unit
1,33,883.
cu.m
91,782.000
cu.m
1,17,553.
cu.m
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position
81375 1-9-1-1
81376 1-9-1-2
Sal wood
81377 1-9-1-3
81378 1-9-1-4
Chir Wood
49,804.000
cu.m
81379 1-9-2
96,890.900
cu.m
85,216.700
cu.m
1,10,285.
cu.m
13,388.400
cu.m
9,686.800
cu.m
11,794.200
cu.m
1-9-3
Providing wood work in frames of false ceiling, partitions etc. sawn and put up in
position
81380 1-9-3-1
Sal wood
81381 1-9-3-2
1-9-4
Extra for additional labour for circular works, such as in frames of fan light
81382 1-9-4-1
81383 1-9-4-2
Sal wood
81384 1-9-4-3
1-9-5
Providing and fixing panelled or panelled and glazed shutters for doors, windows
and clerestory windows including ISI marked black enamelled M.S butt hinges with
necessary screws excluding panelling which will be paid for separately.
1-9-5-1
81385 1-9-5-1-1
35 mm thick shutters
3,477.200
sq.m
81386 1-9-5-1-2
30 mm thick shutters
3,084.800
sq.m
1-9-5-2
81387 1-9-5-2-1
35 mm thick shutters
3,580.100
sq.m
81388 1-9-5-2-2
30 mm thick shutters
3,174.700
sq.m
1-9-5-3
81389 1-9-5-3-1
35 mm thick shutters
0.000
sq.m
81390 1-9-5-3-2
30 mm thick shutters
0.000
sq.m
1-9-6
Providing and fixing 35 mm thick factory made laminated veneer lumber door
shutter
conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked black
enamelled M.S. butt hinges with necessary screws as per directions of
Building Works Based On CPWD
skeleton - 2014-2015 Page 36 of 184
Engineer-incharge
16/05/2014 - 1-9
and panelling with panels of
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
2,377.100
sq.m
81392 1-9-6-2
2,377.500
sq.m
81393 1-9-6-3
2,377.100
sq.m
1-9-7
Providing and fixing panelling or panelling and glazing in panelled or panelled and
glazed shutters for doors, windows and clerestory windows (Area of opening for
panel inserts excluding portion inside grooves or rebates to be measured). Panelling
for panelled or panelled and glazed shutters 25 mm to 40 mm thick
81394 1-9-7-1
2,800.600
sq.m
81395 1-9-7-2
2,948.300
sq.m
1-9-7-3
81396 1-9-7-3-1
Decorative plywood both side decorative veneer (Type -1) conforming to IS 1328
BWR type.
1,917.300
sq.m
81397 1-9-7-3-2
1,651.200
sq.m
1,763.300
sq.m
929.800
sq.m
1-9-7-4
81398 1-9-7-4-1
1-9-7-5
81399 1-9-7-5-1
Page 37 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81400 1-9-7-5-2
Veneered flat pressed three layer or graded wood particle board with commercial
veneering on both sides conforming to IS:3097, grade I.
1,175.000
sq.m
81401 1-9-7-5-3
1,511.100
sq.m
81402 1-9-7-5-4
1,567.200
sq.m
1,373.900
sq.m
1-9-7-6
81403 1-9-7-6-1
1-9-7-7
81404 1-9-7-7-1
1,131.100
sq.m
81405 1-9-7-7-2
1,417.600
sq.m
81406 1-9-7-8
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm
wide aperture with matching wood beading
0.000
sq.m
1,385.100
sq.m
1-9-8
81407 1-9-8-1
Providing and fixing panelling or panelling and glazing in panelled or panelled and
glazed shutters for doors, windows and clerestory windows (area of opening for
panel inserts excluding portion inside grooves or rebates to be measured). Panelling
for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Coir veneer
board (conforming to IS : 14842-2000)
12 mm thick
1-9-9
Providing and fixing glazed shutters for doors, windows and clerestory windows
using 4 mm thick float glass panes including black enamelled ISI marked MS butt
hinges with necessary screws.
1-9-9-1
81408 1-9-9-1-1
35 mm thick
4,179.200
sq.m
81409 1-9-9-1-2
30 mm thick
3,730.800
sq.m
1-9-9-2
81410 1-9-9-2-1
35 mm thick
4,264.300
sq.m
81411 1-9-9-2-2
30 mm thick
3,831.800
sq.m
1-9-9-3
81412 1-9-9-3-1
35 mm thick
0.000
sq.m
81413 1-9-9-3-2
30 mm thick
0.000
sq.m
1-9-10
Providing and fixing factory made laminated veneer lumber glazed shutter
conforming
to IS 14616 and TADS 15:2001 (Part B), using 4mm thick float glass panes for
doors,
windows and clerestory windows including ISI marked black enamelled M.S butt
Building Works Based On CPWD
- 2014-2015
38 of
184
hinges skeleton
with necessary
screws- as perPage
directions
of Engineer-in-charge
16/05/2014 - 1-9
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
windows and clerestory windows including ISI marked black enamelled M.S butt
hinges with necessary screws as per directions of Engineer-in-charge
81414 1-9-10-1
30 mm thick shutters
81415 1-9-11
2,177.700
sq.m
Extra for providing heavy sheet float glass panes instead of ordinary float
glass in glazed doors, windows and clerestory window shutters. (Area of
opening for glass panes excluding portion inside rebate shall be
measured)
5.5 mm thick instead of 4 mm thick.
256.900
sq.m
81416 1-9-12
-65.700
sq.m
81417 1-9-13
Deduct for providing pin headed glass panes instead of ordinary float
glass panes weighing 4 mm thick in doors, windows and clerestory
windows, shutters (Area of opening for glass panes excluding portion
inside rebate shall be measured).
106.800
sq.m
81418 1-9-14
Extra for providing ISI marked Stainless Steel butt hinges instead of black
enamelled M.S. butt hinges with necessary screws. (Shutter area to be
measured).
103.700
sq.m
148.800
sq.m
45.100
sq.m
1-9-15
Deduct if fixed shutters (without hinges) are provided instead of openable shutters
for doors, windows or clerestory windows with
1-9-15-1
81419 1-9-15-1-1
1-9-15-2
81420 1-9-15-2-1
For 2nd class teak wood and other inferior class of wood shutters.
Black enamelled M.S. butt hinges with necessary screws.
For 2nd class teak wood and other inferior class of wood shutters.
1-9-16
1-9-16-1
81421 1-9-16-1-1
Second class teak wood including ISI marked anodised aluminium butt hinges with
necessary screws.
3,392.600
sq.m
81422 1-9-16-1-2
Second class teak wood including ISI marked nickel plated bright finished M.S.
piano hinges with necessary screws.
0.000
sq.m
1-9-16-2
Glazed shutters
81423 1-9-16-2-1
Second class teak wood including ISI marked anodised aluminium butt hinge with
necessary screws.
3,312.500
sq.m
81424 1-9-16-2-2
Second class teak wood including ISI marked nickel plated bright finished M.S.
piano hinges with necessary screws.
0.000
sq.m
1-9-17
Providing and fixing flat pressed 3 layer particle board medium density exterior
grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or
studding with screws etc. complete (Frames, backing or studding to be paid
Building Works Based On CPWD
skeleton - 2014-2015 separately)
Page 39 of 184
16/05/2014 - 1-9
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
12 mm thick
519.800
sq.m
81426 1-9-17-2
18 mm thick
638.600
sq.m
1-9-18
Providing and fixing prelaminated flat pressed 3 layer (medium density) particle
board or graded wood particle board IS: 3087 marked with one side decorative and
other side balancing lamination Grade I,Type II exterior grade IS : 12823 marked in
shelves with screws and fittings wherever required, edges to be painted with
polyurethene primer (fittings to be paid separately).
81427 1-9-18-1
18mm thick
1,199.700
sq.m
81428 1-9-18-18-2
25 mm thick
1,301.300
sq.m
3,224.500
sq.m
3,338.300
sq.m
1-9-19
Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked
black enamelled M.S. butt hinges with necessary screws
1-9-19-1
81429 1-9-19-1-1
1-9-19-2
81430 1-9-19-2-1
1-9-20
81431 1-9-20-1
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
2,324.100
sq.m
81432 1-9-20-2
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
2,148.100
sq.m
81433 1-9-20-3
25 mm thick (for cupboard) including ISI marked nickel plated bright finished
M.S.Piano hinges IS : 3818 marked
1,946.300
sq.m
1-9-21
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)
non-decorative type, core of block board construction with frame of 1st class hard
wood and well matched commercial 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters
81434 1-9-21-1
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
1,705.700
sq.m
81435 1-9-21-2
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
1,529.800
sq.m
81436 1-9-21-3
25mm thick (for cupboard) including ISI marked nickel plated bright finished
M.S.piano hinges with necessary screws.
1,386.600
sq.m
398.900
sq.m
351.900
metre
1-9-22
81437 1-9-22-1
81438 1-9-23
Extra for Providing and fixing flush doors with decorative veneering
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth
on all edges of shutters (over all area of door shutter to be measured) Over item no.
9.20 and
9.21. - 2014-2015 Building Works Based On CPWD
skeleton
Page 40 of 184
16/05/2014 - 1-9
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
on all edges of shutters (over all area of door shutter to be measured) Over item no.
9.20 and 9.21.
1-9-24
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors
(cost of glass excluded) (overall area of door shutter to be measured)
81439 1-9-24-1
Rectangular or square.
134.900
sq.m
81440 1-9-24-2
Circular
211.200
sq.m
363.700
sq.m
99.700
sq.m
1-9-25
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall
area of door shutters to be measured).
81441 1-9-25-1
81442 1-9-26
Extra for cutting rebate in flush door shutters (Total area of the shutter to be
measured).
1-9-27
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of
average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm for
doors, windows and clerestory windows with hinges and necessary screws :
1-9-27-1
35 mm thick shutters.
1-9-27-1-1
With ISI marked M.S. pressed butt hinges bright finished of required size.
81443 1-9-27-1-1-1
25,266.700
sq.m
81444 1-9-27-1-1-2
11,294.300
sq.m
81445 1-9-27-1-1-3
0.000
sq.m
1-9-27-1-2
81446 1-9-27-1-2-1
0.000
sq.m
81447 1-9-27-1-2-2
0.000
sq.m
81448 1-9-27-1-2-3
0.000
sq.m
25,266.700
sq.m
9,924.700
sq.m
0.000
sq.m
1-9-27-2
30 mm thick shutters.
1-9-27-2-1
With ISI marked M.S. pressed butt hinges bright finished of required size.
81449 1-9-27-2-1-1
81450 1-9-27-2-1-2
81451 1-9-27-2-1-3
1-9-27-2-2
81452 1-9-27-2-2-1
25,369.300
sq.m
81453 1-9-27-2-2-2
10,027.300
sq.m
81454 1-9-27-2-2-3
0.000
sq.m
1-9-28
Providing and fixing 35mm thick wire gauze shutters using galvanised M.S.
wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for
doors, skeleton
windows-and
clerestory
ISI marked stainless steel
Building Works Based On CPWD
2014-2015
- windows
Pageincluding
41 of 184
butt hinges with necessary screws
16/05/2014 - 1-9
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for
doors, windows and clerestory windows including ISI marked stainless steel
butt hinges with necessary screws
81455 1-9-28-1
3,958.700
sq.m
81456 1-9-28-2
4,062.200
sq.m
1-9-29
Providing and fixing 30mm thick wire gauge shutters using galvanised M.S. wire
gauge of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors,
windows and clerestory windows including ISI marked Stainless Steel butt
hinges with necessary screws
81457 1-9-29-1
3,442.200
sq.m
81458 1-9-29-2
3,532.000
sq.m
1-9-30
Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire
gauze of average width of aperture 1.4mm with wire of dia 0.63 mm for doors,
windows and clerestory windows including ISl marked bright finished or /and
black enamelled M.S. butt hinges with necessary screws
81459 1-9-30-1
3,383.400
sq.m
81460 1-9-30-2
3,473.300
sq.m
1-9-31
Providing and fixing wire gauze laminated veneer lumber shutters conforming to
IS :
14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauze with
average
width of aperture 1.4mm in both directions with wire of dia 0.63mm as per IS : 1568
for doors, windows and clerestory windows including ISI marked bright finished
or/ and black enamelled M.S. butt hinges with necessary screws as per directions
of Engineer-in-charge
81461 1-9-31-1
35 mm thick shutters
2,377.100
sq.m
81462 1-9-31-2
30 mm thick shutters
2,177.700
sq.m
81463 1-9-32
Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and
fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc.
26.400
Nos.
1-9-33
Providing and fixing expandable fasteners of specified size with necessary plastic
sleeves and galvanised M.S. screws including drilling holes in masonry work/CC/
R.C.C. and making good etc. complete.
81464 1-9-33-1
25 mm long
15.900
Nos.
81465 1-9-33-2
32 mm long
18.100
Nos.
81466 1-9-33-3
40 mm long
21.600
Nos.
81467 1-9-33-4
50 mm long
22.800
Nos.
1-9-34
Providing and fixing 2nd class teak wood plain lining tongued and grooved on and
including wooden plugs complete with necessary screws and priming coat on
unexposed surface
Building Works Based On CPWD skeleton - 2014-2015 Page 42 of 184
16/05/2014 - 1-9
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
unexposed surface
81468 1-9-34-1
40 mm thick
6,465.400
sq.m
81469 1-9-34-2
25 mm thick.
4,172.700
sq.m
81470 1-9-34-3
20 mm thick
3,312.200
sq.m
81471 1-9-34-4
12 mm thick
2,115.400
sq.m
1-9-35
Providing and fixing in wall lining flat pressed three layer (medium density) particle
board or graded wood prelaminated one side decorative lamination on other side
balancing lamination Grade I,Type II, IS : 12823 marked including priming coat on
unexposed surface, with necessary fixing arrangement and screws etc.
81472 1-9-35-1
12 mm thick
1,171.400
sq.m
81473 1-9-35-2
18 mm thick
1,310.600
sq.m
81474 1-9-35-3
25 mm thick
1,166.800
sq.m
1,80,040.
cu.m
84,977.100
cu.m
969.100
sq.m
1-9-36
Providing and fixing specified wood frame work consisting of battens 50x25mm
fixed with rawl plug and drilling necessary holes for rawl plug etc. including
priming
coat complete.
81475 1-9-36-1
Sheesham wood.
81476 1-9-36-2
Chir Wood
81477 1-9-38
Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842 Plain
lining with necessary screws, priming coat on unexposed surface etc., complete.
1-9-39
Providing and fixing skirting of prelaminated with (one side decorative and other
side balancing lamination) flat pressed, 3 layer or graded particle board (medium
density) Grade I, Type II, IS : 12823 marked, with necessary fixing arrangements
and screws including drilling necessary holes for rawl plugs etc. and priming coat
on unexposed surface complete :
81478 1-9-39-1
18 mm thick
1,501.500
sq.m
81479 1-9-39-2
25 mm thick
1,598.000
sq.m
1-9-40
Providing and fixing wooden moulded beading to door and window frames with
iron screws, plugs and priming coat on unexposed surface etc. complete :
1-9-40-1
81480 1-9-40-1-1
50x12 mm
143.400
metre
81481 1-9-40-1-2
50x20 mm
197.300
metre
1-9-40-2
Sheesham wood
81482 1-9-40-2-1
50x12 mm
145.500
metre
81483 1-9-40-2-2
50x20 mm
200.700
metre
Page 43 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81484 1-9-42
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or
graded wood particle board medium density grade I, IS : 3087 marked including
top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel
plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets
including fixing with 25x3 mm M.S. flat 10 cm long and rawl plugs 50 mm long
(designation 10 no.) etc all complete
347.000
rm
81485 1-9-43
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI
marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickel
plated M.S. Pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets
including fixing with 25x3 mm M.S. Flat 10 cm long and rawl plug 50 mm long
(designation 10 No.) etc., all complete
466.300
rm
1-9-44
81486 1-9-44-1
31.900
sq.m
81487 1-9-44-2
48.800
sq.m
81488 1-9-45
46.000
metre
1-9-46
81489 1-9-46-1
12 mm dia.
225.100
metre
81490 1-9-46-2
20 mm dia.
255.600
metre
81491 1-9-46-3
25 mm dia.
390.500
metre
1-9-47
81492 1-9-47-1
114.100
metre
81493 1-9-47-2
130.600
metre
1-9-48
81494 1-9-48-1
112.200 kilogram
81495 1-9-48-2
MS grills fixed to openings /wooden frames with rawl plugs screws etc.
120.000 kilogram
81496 1-9-49
1,027.300
sq.m
81497 1-9-50
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not
less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of
second class teak wood
1,166.100
sq.m
1-9-51
Providing and fixing fly proof galvanised M.S. wire gauge to windows and
clerestory
81498 1-9-51-1
979.400
sq.m
81499 1-9-51-2
564.700
sq.m
922.100
sq.m
81500 1-9-52
Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than
7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass
sheet 4 mm thick.
Building Works Based On CPWD skeleton - 2014-2015 Page 44 of 184
16/05/2014 - 1-9
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
sheet 4 mm thick.
81501 1-9-53
1-9-54
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embedding in cement concrete
block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size)
Providing beams including hoisting, fixing in position
81502 1-9-54-1
Sal wood.
81503 1-9-54-2
Sheesham wood.
1-9-55
128.700 Quintal
83.400
cu.m
131.900
cu.m
Providing and fixing ISI marked M.S. pressed butt hinges bright finished
81504 1-9-55-1
125x65x2.12 mm
31.300
Hinges
81505 1-9-55-2
100x58x1.90 mm
24.500
Hinges
81506 1-9-55-3
75x47x1.70 mm
20.100
Hinges
81507 1-9-55-4
50x37x1.50 mm
10.800
Hinges
1-9-56
81508 1-9-56-1
125x90x4.00 mm
54.700
Hinges
81509 1-9-56-2
100x75x3.50 mm
35.000
Hinges
81510 1-9-56-3
75x60x3.10 mm
23.600
Hinges
81511 1-9-56-4
50x40x2.50 mm
14.300
Hinges
1-9-57
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary
81512 1-9-57-1
125x65x2.12 mm
19.000
Nos.
81513 1-9-57-2
100x58x1.90 mm
30.300
Nos.
81514 1-9-57-3
75x47x1.70 mm
26.300
Nos.
81515 1-9-57-4
50x37x1.50 mm
11.000
Nos.
1-9-58
Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with
81516 1-9-58-1
150x125x27x2.80 mm
56.400
Nos.
81517 1-9-58-2
125x125x27x2.80 mm
53.500
Nos.
81518 1-9-58-3
100x125x27x2.80 mm
44.100
Nos.
81519 1-9-58-4
75x100x20x2.24 mm
38.500
Nos.
1-9-59
Providing and fixing ISI marked oxidised M.S. single acting spring hinges
81520 1-9-59-1
150 mm
156.800
Nos.
81521 1-9-59-2
125 mm
150.900
Nos.
81522 1-9-59-3
100 mm
125.600
Nos.
Page 45 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-9-60
Rate
Unit
81523 1-9-60-1
150 mm
162.600
Nos.
81524 1-9-60-2
125 mm
156.800
Nos.
81525 1-9-60-3
100 mm
131.400
Nos.
1-9-61
81526 1-9-61-1
156.000
metre
81527 1-9-61-2
156.700
metre
81528 1-9-61-3
172.400
metre
1-9-62
81529 1-9-62-1
300x16mm
65.800
Nos.
81530 1-9-62-2
250x16 mm
51.000
Nos.
1-9-63
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,
81531 1-9-63-1
250x10 mm
58.100
Nos.
81532 1-9-63-2
200x10 mm
51.000
Nos.
81533 1-9-63-3
150x10 mm
38.200
Nos.
81534 1-9-63-4
100x10 mm
31.300
Nos.
81535 1-9-64
Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming
to IS : 7534 with necessary screws bolts, nut and washers etc.
84.600
Nos.
1-9-65
Providing and fixing ISI marked oxidised M.S. door latches conforming
81536 1-9-65-1
300x20x6 mm
63.400
Nos.
81537 1-9-65-2
250x20x6 mm
57.500
Nos.
1-9-66
81538 1-9-66-1
125 mm
25.200
Nos.
81539 1-9-66-2
100 mm
22.700
each
81540 1-9-66-3
75 mm
21.500
Nos.
1-9-67
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming
81541 1-9-67-1
150 mm
21.900
Nos.
81542 1-9-67-2
115 mm
19.100
Nos.
81543 1-9-67-3
90 mm
16.200
Nos.
33.300
Nos.
1-9-68
81544 1-9-68-1
Page 46 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81545 1-9-68-2
30.500
Nos.
81546 1-9-68-3
28.100
Nos.
81547 1-9-69
Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors.
(Weighing not less than 450 gms.)
78.200
Nos.
1-9-70
Providing and fixing IS : 12817 marked stainlesssteel butt hinges with stainless
81548 1-9-70-1
125x64x1.90 mm
63.200
Nos.
81549 1-9-70-2
100X58X1.90 mm
56.100
Hinges
81550 1-9-70-3
75x47x1.80 mm
38.400
Hinges
81551 1-9-70-4
50x37x1.50 mm
24.300
Hinges
1-9-71
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight)
81552 1-9-71-1
125x64x2.50 mm
72.600
Hinges
81553 1-9-71-2
100x60x2.50 mm
57.300
Hinges
81554 1-9-71-3
75x50x2.50 mm
43.600
Hinges
1-9-72
Providing and fixing bright finished brass butt hinges with necessaryscrews etc.
81555 1-9-72-1
374.800
Nos.
81556 1-9-72-2
128.400
Nos.
81557 1-9-72-3
331.000
Nos.
81558 1-9-72-4
102.200
Nos.
81559 1-9-72-5
125.700
Nos.
81560 1-9-72-6
67.000
Nos.
81561 1-9-72-7
28.900
Nos.
1-9-73
Providing and fixing bright finished brass parliamentary hinges with necessary
81562 1-9-73-1
150x125x27x5 mm
57.600
Hinges
81563 1-9-73-2
125x125x27x5 mm
296.900
Hinges
81564 1-9-73-3
100x125x27x5 mm
50.600
Hinges
81565 1-9-73-4
75x100x20x3.2 mm
209.000
Hinges
1-9-74
Providing and fixing bright finished brass towerbolts (barrel type)with necessary
81566 1-9-74-1
250x10 mm
314.800
Tower
bolts
81567 1-9-74-2
200x10 mm
229.300
Tower
bolts
81568 1-9-74-3
150x10 mm
194.100
Page 47 of 184
Tower
bolts
16/07/15
12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
bolts
81569 1-9-74-4
1-9-75
100x10 mm
126.500
Tower
bolts
Providing and fixing bright finished brass door latch with necessary screws etc.
81570 1-9-75-1
300x16x5 mm
204.900
Nos.
81571 1-9-75-2
250x16x5 mm
193.200
Nos.
81572 1-9-76
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles with necessary screws etc. complete (best make
of approved quality).
1,506.100 mortice
latch and
lock
81573 1-9-77
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt
and a pair of lever handles with necessary screws etc. complete (best make of
approved quality).
1,271.500 mortice
latch and
lock
81574 1-9-78
Providing and fixing bright finished brass night latch including necessary screws
etc. complete (best make of approved quality).
1-9-79
Providing and fixing special quality bright finished brass cupboard or ward robe
626.300 mortice
latch and
lock
81575 1-9-79-1
40 mm
309.500 mortice
latch and
lock
81576 1-9-79-2
50 mm
309.500 mortice
latch and
lock
81577 1-9-79-3
65 mm
309.500 mortice
latch and
lock
81578 1-9-79-4
75 mm
309.500 mortice
latch and
lock
81579 1-9-80
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with
necessary screws (best make of approved quality)
1-9-81
33.900 Cupboard
knob
Providing and fixing bright finished brass handles with screws etc.
81580 1-9-81-1
125 mm
172.500 Handles
81581 1-9-81-2
100 mm
154.500 Handles
81582 1-9-81-3
75 mm
119.300
each
81583 1-9-82
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc.
80.600
Door
stoppers
81584 1-9-83
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type
universal
hydraulic
door closer
with necessary
accessories and screws etc.
Building Works Based On CPWD
skeleton
- 2014-2015
Page 48 of 184
16/05/2014 - 1-9
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Providing and fixing IS : 3564 marked aluminium extruded section body tubular
type universal hydraulic door closer with double speed adjustment with necessary
accessories and screws etc.
81586 1-9-85
Providing and fixing bright finished brass casement window fastener with necessary
screws etc.
1-9-86
Providing and fixing bright finished brasscasement stays (straight peg type)
81587 1-9-86-1
152.400 Casement
stays
81588 1-9-86-2
127.300 Casement
stays
81589 1-9-86-3
115.600 Casement
stays
1-9-87
Providing and fixing bright finished brass hasp and staple (safety type) with
81590 1-9-87-1
150 mm
95.700
81591 1-9-87-2
115 mm
81592 1-9-87-3
90 mm
81593 1-9-88
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles with necessary screws etc. complete (best make of
approved quality).
1,506.100 mortice
latch and
lock
81594 1-9-89
Providing and fixing chromium plated brass night latch including necessary screws
etc. complete (Best make of approved quality).
684.900 mortice
latch and
lock
1-9-90
class
Providing and fixing special quality chromium plated brass cupboard locks with
81595 1-9-90-1
Size 40 mm
174.600 mortice
latch and
lock
81596 1-9-90-2
Size 50 mm
186.400 mortice
latch and
lock
81597 1-9-90-3
Size 65 mm
198.100 mortice
latch and
lock
81598 1-9-90-4
Size 75 mm
227.400 mortice
latch and
lock
Page 49 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
81599 1-9-91
1-9-92
Rate
Unit
537.100 Cupboard
knob
Providing and fixing chromium plated brass handles with necessary screws etc.
81600 1-9-92-1
125 mm
195.900 Handles
81601 1-9-92-2
100 mm
172.100 Handles
81602 1-9-92-3
75 mm
148.600 Handles
81603 1-9-93
Providing and fixing chromium plated brass casement window fastener with
necessary screws etc. complete.
116.500 window
fasteners
1-9-94
Providing and fixing chromium plated brass casement stays (straight peg type)
81604 1-9-94-1
175.200 window
fasteners
81605 1-9-94-2
151.700 window
fasteners
81606 1-9-94-3
128.200 window
fasteners
1-9-95
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating
81607 1-9-95-1
125x75x4 mm
104.700
Nos.
81608 1-9-95-2
125x63x4 mm
100.000
Nos.
81609 1-9-95-3
100x75x4 mm
89.500
Nos.
81610 1-9-95-4
100x63x4 mm
88.300
Nos.
81611 1-9-95-5
100x63x3.2 mm
87.200
Nos.
81612 1-9-95-6
75x63x4 mm
79.700
Nos.
81613 1-9-95-7
75x63x3.2 mm
76.200
Nos.
81614 1-9-95-8
75x45x3.2 mm
66.800
Nos.
1-9-96
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic
81615 1-9-96-1
300x16 mm
221.000
sliding
bolts
81616 1-9-96-2
250x16 mm
185.800
sliding
bolts
1-9-97
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating
81617 1-9-97-1
300x10 mm
109.600
Tower
bolts
81618 1-9-97-2
250x10 mm
92.000
Tower
bolts
Page 50 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81619 1-9-97-3
200x10 mm
77.600
Tower
bolts
81620 1-9-97-4
150x10 mm
63.500
Tower
bolts
81621 1-9-97-5
100x10 mm
50.600
Tower
bolts
81622 1-9-98
Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating
not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade with necessary screws bolts, nuts and washers etc. complete.
81623 1-9-99
Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to
required colour or shade with necessary screws etc. complete.
164.200 Kicking
plates
1-9-100
Providing and fixing aluminium handles ISI marked anodised (anodic coating not
81624 1-9-100-1
125 mm
67.800 Handles
81625 1-9-100-2
75 mm
67.600 Handles
81626 1-9-100-3
75 mm
45.800 Handles
1-9-101
Providing and fixing aluminium hanging floor door stopper ISI marked anodised
81627 1-9-101-1
36.500
Door
stoppers
81628 1-9-101-2
81.100
Door
stoppers
81629 1-9-102
Providing and fixing aluminium casement stays ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour and shade with necessary screws etc. complete.
69.600 Casement
stays
81630 1-9-103
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI
marked with six levers and a pair of anodised (anodic coating not less than grade AC
10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete
(Best make of approved quality).
81631 1-9-104
Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in
pelmets as curtain rod.
1-9-105
1,912.700
Lock
62.800
metre
Providing and fixing partition upto ceiling height consisting of G.I. frame and
81632 1-9-105-1
67mm overall thickness partition with 8.5 mm thick double skin Glass reinforced
Gypsum (GRG) board conforming to IS: 2095: part III
1,243.200
sq.m
81633 1-9-105-2
75mm overall thickness partition with 12.5mm thick double skin plain Gypsum
board conforming to IS: 2095: part I
1,078.900
sq.m
1,543.500
sq.m
81634 1-9-105-3
66mm overall thickness Partition with 8mm thick double skin Calcium Silicate
Board made with Calcareous & Siliceous materials reinforced with cellulose fiber
manufactured through autoclaving process to give stable crystalline structure.
Non Combustible & Spread of Flame (as per BS standard 476 Part IV & VII),
Building Works Based On CPWD skeleton - 2014-2015 Page 51 of 184
Water,
16/05/2014 - 1-9
Termite & Fungus Resistant, Compressive Strength 225 kg/sq.cm, Bending
Strength 100 kg/ sqcm.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Non Combustible & Spread of Flame (as per BS standard 476 Part IV & VII),
Water,
Termite & Fungus Resistant, Compressive Strength 225 kg/sq.cm, Bending
Strength 100 kg/ sqcm.
81635 1-9-105-4
1-9-106
66mm overall thickness partition using 8mm thick double skin non- asbestos
multipurpose cement board reinforced with cellulose fibre manufactured through
autoclaving process (High pressure steam cured) as per IS: 14862, non combustible,
non ignitable ,fire propagation index and surface spread of flame (as per BS 476 part
IV, V, VI and VII), moisture, termite & fungus resistant, with suitable fibre cement
screw.
1,163.400
sq.m
Providing and fixing PTMT handles with necessary screws etc. complete.
81636 1-9-106-1
44.900
Nos.
81637 1-9-106-2
49.600
Nos.
1-9-107
Providing and fixing PTMT Butt hinges with necessary screws etc. complete.
81638 1-9-107-1
76.400
Nos.
81639 1-9-107-2
100x75x10 mm fitted with 5.5 mm dia MSBright Bar Rod weighing not less than
53gms.
97.200
Nos.
1-9-108
Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and
81640 1-9-108-1
89.600
Nos.
81641 1-9-108-2
117.400
Nos.
81642 1-9-109
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with
suitable washers weighing not less than 33 gms.
36.900
Nos.
81643 1-9-110
Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm
dia (Average) half cut bamboo placed vertically and fixed together with three
numbers
horizontal running members of sheesham wood in scantling of section 50X25mm
fixed
with nails and G.I wire to existing support complete as per direction of
Engineer-incharge.
8,411.000
sq.m
251.100
metre
55.400
metre
749.400
Nos.
1-9-111
81644 1-9-111-1
81645 1-9-112
Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading
of size 18X5mm fixed with wooden adhesive like fevicol etc and screws/ nails on
the
edges of the prelaminated particle board as per direction of Engineer-in-charge.
81646 1-9-113
Providing and fixing bright finished 100mm mortice lock with 6 levers without pair
of handles for aluminium door with necessary screws etc complete (Best make of
approved quality) as per direction of Engineer-in-charge.
1-9-114
Providing and fixing magnetic catcher in cupboard / ward robe shutters including
Page 52 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81647 1-9-114-1
48.600
Nos.
81648 1-9-114-2
53.300
Nos.
81649 1-9-115
Providing and fixing powder coated telescopic drawer channels 300mm long with
necessary screws etc. complete as per directions of Engineer-in-charge.
188.100
set
81650 1-9-116
11.500
Nos.
1-9-117
Providing and fixing factory made UPVC door frame made of UPVC extruded,
section
81651 1-9-117-1
202.100
metre
81652 1-9-117-2
436.700
metre
81653 1-9-118-1
3,085.500
24 mm thick factory made PVC door shutters made of styles and rails of a UPVC
hollow section of size 59x24 mm and wall thickness 2 mm 0.2 mm with inbuilt
edging on both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0
mm and stainless steel screws. The styles of the shutter reinforced by inserting
galvanised M.S. tube of size 20x20 mm and 1 mm 0.1 mm wall thickness. The
lock
rail made up ofH section, a UPVC hollow section of size 100x24 mm and 2 mm
0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised
M.S. U cleats. The shutter frame filled with a UPVC multi-chambered single panel
of size not less than 620 mm, having over all thickness of 20 mm and 1 mm 0.1
mm
wall thickness . The panels filled vertically and tie bar at two places by inserting
horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers,
complete
as per manufacturers specification and direction of Engineer-in-charge. (For W.C.
and bathroom door shutter).
sq.m
81654 1-9-118-2
30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles
and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm
0.2mm with inbuilt decorative moulding edging on one side. The styles and rails
with plastic brackets of size 75x220mm mitre and welded at the corners. The- stiles
of the shutter reinforced by inserting galvanized M.S. tube of size 25x20mm and
1mm 0.1mm wall thickness. The lock rail made up of H section, a UPVC profile
section of size 30mm x 100mm and 2mm0.2mm wall thickness welded to the
shutter style with a UPVC profile section single panel of size not less than 620mm,
having overall thickness of 20 mm and 1 mm0.1 mm wall thickness with 20 mm
panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver
frame of suitable size, as per manufactures specification and direction of Engineerincharge. (For W.C. and bathroom door Shutter)
2,792.200
sq.m
1-9-118
Page 53 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81655 1-9-118-3
25mm thick PVC flush door shutters upto 737mm width of colour and shade as
approved by Engineer-in-charge made out of a one piece Multi chamber extruded
PVC section of the size of 762mm X 25mm or less as per requirement with an
average wall thickness of 1mm 0.3mm. PVC foam end cap of size 23x10mm are
provided on both vertical edges to ensure the overall thickness of 25mm. An MS
tube having dimensions 19mm x 19mm is inserted along the hinge side of the
door. Core of the door shutter should be filled with High Density Polyurethane
foam. The Top & Bottom edges of the shutter are covered with an end-cap of the
size 25mm X 11mm. Door shutter shall be reinforced with special polymeric
reinforcements as per manufactures specification and drawing to take up
necessary hardware and fixtures. Stickers indicating the locations of hardware
will be pasted at appropriate places
2,674.900
sq.m
81656 1-9-119
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall
thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at
corners
and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the
vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,
EPDM rubber gasket weather seal to be provided through out the frame. The door
frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per
manufacturers specification and direction of Engineer-in-Charge.
437.900
metre
30mm thick factory made solid panel PVC door shutter consisting of frame made
out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top &
bottom rails. M.S .frame shall have a coat of steel primers of approved make and
manufacture M.S. frame covered with 5mm thick heat moulded PVC C channel of
size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm
shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick,
110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered
on the inner side to form top and bottom rail and 130mm wide PVC sheet out of
which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail.
Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x
2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail &
bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame
welded/
sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet
bending on inner side, and joined together with solvent cement adhesive. An
additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of
the C Channel using PVC solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufactures specification & drawing.
2,704.500
sq.m
30mm thick factory made solid both side prelam panel PVC door shutter consisting
of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm
for stiles, top & bottom rails. M.S. frame shall have a coat of steel primers of
approved
make and manufacture . M.S. frame covered with 5mm thick heat moulded prelam
PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 45degree angle on either side forming stiles; and
5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall
Building Works Based On CPWD skeleton - 2014-2015 of top
184
be tapered in 45 degree on the innerPage
side to54
form
and bottom rail and 115mm
16/05/2014 - 1-9
wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on
both sides to form lock rail. Top, button and lock rails shall be provided either side
of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as
gap insert for top rail & bottom rail, panelling of 5mm thick both side Prelam PVC
sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm
(5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined
3,173.800
sq.m
1-9-120
81657 1-9-120-1
81658 1-9-120-2
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall
be tapered in 45 degree on the inner side to form top and bottom rail and 115mm
wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on
both sides to form lock rail. Top, button and lock rails shall be provided either side
of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as
gap insert for top rail & bottom rail, panelling of 5mm thick both side Prelam PVC
sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm
(5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined
together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the C Channel using PVC solvent
adhesive
etc. complete as per direction of Engineer-in-charge. manufacturers specification
& drawing.
81659 1-9-121
1-9-122
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of
crosssection
90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of
30mm thickness .The laminate shall be molded with fire resistant grade unsaturated
polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall
be filled with suitable wooden block in all the three legs. The frame shall be covered
with fibreglass from all sides. MS stay shall be provided at the bottom to steady the
frame.
473.100
metre
81660 1-9-122-1
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required
colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming
hollow rails and styles, with wooden frame and suitable blocks of seasoned wood
inside at Code Description Unit Quantity Rate Amount required places for fixing of
fittings, cast monolithically with 5mm thick FRP laminate
for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to
frames.
3,584.300
sq.m
81661 1-9-122-2
30mm thick fibreglass reinforced plastice (F.R.P.) flush door shutter in different
plain and wood finish made with fire retardant grade unsaturated polyster resin,
moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside
at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene
foam to be used as filler material throughout the hollow panel, casted monolithically
with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 :
2000, complete as per direction of Engineer-in-charge
2,704.500
sq.m
81662 1-9-123
Providing and fixing factory made door frame (single rebate) made of solid PVC
foam profile with homogenous fine cellular structure having smooth outer integral
skin having 60mm width & 30mm thickness and shall be fixed to wall as per
instructions of engineer-in-charge using 100x8 sheet metal CSK screws.
367.500
sq.m
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with
homogenous fine cellular structure having smooth outer integral skin having 71mm
width & 28mm thick as vertical & horizontal styles. Joints are made using solvent
adhesive and GI C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x
20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be
Building Works Based On CPWD
skeleton
- 2014-2015
Page 55
of 184
filled with
3mm
thick high- - pressure
compact
laminate as per manufacturers
16/05/2014 - 1-9
specifications and directions of the Engineer-in-charge, cover moulding shall be
provided for covering fixing screws and elegant look.( for W.C. bathroom door
shutter).
2,821.800
sq.m
81663 1-9-124
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be
filled with 3mm thick high - pressure compact laminate as per manufacturers
specifications and directions of the Engineer-in-charge, cover moulding shall be
provided for covering fixing screws and elegant look.( for W.C. bathroom door
shutter).
81664 1-9-125
1-9-126
Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters
(bathroom and W.C. doors) using synthetic rubber based adhesive
752.700
sq.m
Providing and fixing 12mm thick panelling or panelling and glazing in panelled or
81665 1-9-126-1
1,665.200
sq.m
81666 1-9-126-2
1,707.200
sq.m
1-9-127
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain
81667 1-9-127-1
1.5 mm thick.
813.500
sq.m
81668 1-9-127-2
1.0 mm thick.
671.500
sq.m
81669 1-9-128
Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja
4mm thick of required colour, size and design made by Resin Transfer Moulding
(RTM) Machine Technology, resulting in void free compact laminate in single
piece, having smooth gradual slope curvature for easy drainage of water and duly
reinforced by 50x2mm thick M.S. flat with 12mm in built hole for grouting on the
existing wall along with the flanges duly inserted and sealed in the wall complete in
one single piece casted monolithically, including all necessary fittings . The FRP
Chajja should be manufactured using unsaturated Polyester resin as per IS: 11551
complete with protective Gelcoat U/V coating on Top for complete resistance from
the extreme of temperature, weather & sunlight,
4,847.400
sq.m
81670 1-9-129
Providing and fixing cup board shutters 25mm thick, with prelaminated flat pressed
three layer particle board or graded wood particle board IS: 12823 marked exterior
grade (Grade 1 Type II) having one side decorative lamination and other side
balancing lamination including Ilnd class teak wood lipping of 25mm wide xl2 mm
thick with necessary screws and bright finished stainless steel piano hinges
complete as per direction of the Engineer-in-Charge
1,602.800
sq.m
1-9-130
Providing and fixing cup board shutters with 25mm thick veneered particle board
81671 1-9-130-1
With decorative veneering on one side and commercial veering on other side.
1,368.200
sq.m
81672 1-9-130-2
1,262.600
sq.m
2,906.400
sq.m
1-9-131
81673 1-9-131-1
25 mm thick.
81674 1-9-132
1-9-133
439.400 kilogram
Providing and fixing, in position concealed G.I. section for wall panelling using
1-9-133-1
Tapered edge calcium silicate board made with calcareous & siliceous materials
reinforced with cellulose fiber manufactured through autoclaving process to give
stable crystalline structure, Non combustible & spread of Flame (as per BS standard
Building Works Based On CPWD skeleton - 2014-2015 Page 56 of 184
476 Part IV & VII), Water, Termite & Fungus resistant, compressive strength 225
16/05/2014 - 1-9
kg/
sq.cm, Bending strength 100 kg/sq.cm.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
stable crystalline structure, Non combustible & spread of Flame (as per BS standard
476 Part IV & VII), Water, Termite & Fungus resistant, compressive strength 225
kg/
sq.cm, Bending strength 100 kg/sq.cm.
81675 1-9-133-1-1
1-9-133-2
81676 1-9-133-2-1
1-9-133-3
10mm thick
956.900
sq.m
719.400
sq.m
81677 1-9-133-3-1
12.5 mm thick
672.900
sq.m
81678 1-9-134
Supplying and fixing of 20mm chir wood planking in roof in position including
simple mouldings straight work as including supply of all material, labour and T&P
etc required for proper completion of work.
925.400
sq.m
81679 1-9-135
S/Fof of (1.5"x 3/4") chir wood beading in roof including simple mouldings straight
work as including supply of all materials labout and T&P etc. required for proper
completion of work. S.I.342(H)
228.800
sq.m
1,129.500
sq.m
17,919.500
sq.m
1-9-37
81680 1-9-37-1
1-9-41
81681 1-9-41-1
Specification:
Providing and fixing decorative plywood 4 mm thick one side decorative veneer
conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws,
priming coat on unexposed surface with :
Decotative veneer facings of approved manufacture.
Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to
be paid separately) including fixing 50x12 mm beading complete with :
Second class teak wood.
Page 57 of 184
16/07/15 12:42
Rate Card
Chapter Name
Steel Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81682 1-10-1
69.300 kilogram
81683 1-10-2
86.000 kilogram
81684 1-10-3
5,500.200
sq.m
81685 1-10-4
Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and
diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset
plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron
guide at the top and bottom respectively including applying a priming coat of
approved steel primer.
3,714.500
sq.m
1-10-5
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle
iron
and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings
complete, including applying a priming coat of approved steel primer
81686 1-10-5-1
3,211.900
sq.m
81687 1-10-5-2
3,107.300
sq.m
1-10-6
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths interlocked together through their entire length and jointed together at the
end by end locks mounted on specially designed pipe shaft with brackets, side
guides
and arrangements for inside and outside locking with push and pull operation
complete including the cost of providing and fixing necessary 27.5cm long wire
springs grade No.2 and M.S. top cover of required thickness for rolling shutters.
81688 1-10-6-1
1,897.600
sq.m
81689 1-10-6-2
1,846.800
sq.m
81690 1-10-6-3
1,754.700
sq.m
81691 1-10-7
440.800
each
637.000
sq.m
1-10-8
81692 1-10-8-1
Extra for providing mechanical device chain and crank operation for operating
rolling
shutters
Exceeding 10.00 sqm and upto 16.80 sqm in the area
Page 58 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81693 1-10-8-2
672.200
sq.m
81694 1-10-9
316.700
sq.m
81695 1-10-12
Extra for providing and fixing steel beading of approved shape and
section with screw instead of glazing clips and metal sash putty in steel
doors, windows, ventilators and composite units.
30.400
metre
1-10-14
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured
from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock
jamb, bead and if required angle threshold of mild steel angle of section 50x25mm,
or base ties of 1.25mm pressed mild steel welded or rigidly fixed together
bymechanical means, adjustable lugs with split end tail to each jamb including steel
butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as
specified and applying a coat of approved steel primer after pre-treatment of the
surface as directed by Engineer-in-charge.
1-10-14-1
Profile B
81696 1-10-14-1-1
Fixing with adjustable lugs with split end tail to each jamb.
477.400
metre
81697 1-10-14-1-2
Fixing with carbon steel galcanised dash fastener of required dia and size ( To be
paid for separately).
477.400
metre
1-10-14-2
Profile C
81698 1-10-14-2-1
Fixing with adjustable lugs with split end tail to each jamb.
501.600
metre
81699 1-10-14-2-2
Fixing with carbon steel galvanised dash fastener of required dia and size ( to be
paid for separately).
501.600
metre
1-10-14-3
Profile E
81700 1-10-14-3-1
Fixing with adjustable lugs with split end tail to each jamb.
537.900
metre
81701 1-10-14-3-2
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid
for separately).
537.900
metre
1-10-16
Steel work in built up tubular trusses including cutting, hoisting fixing in position
and applying a priming coat of approved steel primer, welded and bolted including
special shaped washers etc. complete
81702 1-10-16-1
81703 1-10-16-2
110.700 kilogram
81704 1-10-16-3
116.800 kilogram
81705 1-10-17
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar
bent to shape with hooked ends in R.C.C. slabs, beams during laying
including painting the exposed portion of loop, all as per standard
design complete.
134.500
each
144.600
each
81706 1-10-18
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for
ceilingskeleton
fan clamp
of internal -dia 140mm, 73mm height, top lid of 1.5mm
Building Works Based On CPWD
- 2014-2015
Page 59 of 184
thick
M.S.
sheet
with
its top surface hacked for proper bonding, top lid
16/05/2014 - 1-10
shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm
dia. round headed screws, one lock at the corners. Clamp shall be
made of 12mm dia M.S. bar bent to shape as per standard drawing.
94.700 kilogram
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm
thick M.S. sheet with its top surface hacked for proper bonding, top lid
shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm
dia. round headed screws, one lock at the corners. Clamp shall be
made of 12mm dia M.S. bar bent to shape as per standard drawing.
81707 1-10-19
Providing and fixing M.S. round holding down bolts with nuts and
washer plates complete.
81708 1-10-20
114.800 kilogram
81709 1-10-21
194.600 kilogram
81710 1-10-22
81711 1-10-23
81712 1-10-24
1-10-25
90.500 kilogram
2.300
cm
2,770.600 kilogram
45.700
each
Steel work welded in built up section/framed work including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer using steel etc. as
required.
81713 1-10-25-1
80.000 kilogram
81714 1-10-25-2
97.000 kilogram
1-10-26
Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing,
balcony railing and staircase railing including applying a priming coat of approved
steel primer.
81715 1-10-26-1
M.S. tube
81716 1-10-26-2
E.R.W. tubes.
121.400 kilogram
81717 1-10-26-3
G.I. pipes.
113.500 kilogram
1-10-27
97.000 kilogram
Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash
fastener of 10 mm dia double threaded 6.8 grade (yield strenght 480 N/mm2),
counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including
drilling of hole in frame, concrete/masonry, etc. as per direction of
Engineer-in-charge.
81718 1-10-27-1
10x60 mm
0.000
each
81719 1-10-27-2
10x80 mm
0.000
each
81720 1-10-27-3
10x120 mm
0.000
each
Page 60 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81721 1-10-27-4
10x140 mm
0.000
each
81722 1-10-27-5
10x160 mm
0.000
each
81723 1-10-28
Providing and fixing stainless steel (Grade 304) railling made of Hollow tubes,
channels, plates etc. including welding, grinding, buffing,polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete i/c fixing the railling with necessary accessories & stainless steel
dash fasteners, stainless steel bolts etc.of required size, on the top of the floor or the
side of waist slab with suitable arrangment as per approval of Engineer-in-charge.
(for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.)
0.000 kilogram
1-10-29
Providing & fixing fly proff wire gauze to windows, clerestory windows & doors
with M.S. Flat 15x3 m and nuts & bolts complete.
81724 1-10-29-1
Galcanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both
sides.
588.700
sq.m
81725 1-10-29-2
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on
both sides.
0.000
sq.m
1-10-30
Providing & fixing glass panes with putty and glazing clips in steel doors, windows,
clerestory windows alll complete.
81726 1-10-30-1
5,419.100
sq.m
81727 1-10-30-2
8,213.600
sq.m
1-10-10
Fixing standard steel glazed doors, windows and ventilators in walls with
15x3mm lugs 10 cm long embedded in cement concrete blocks 15x10x10cm
of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) or with wooden plugs and screws or rawl plugs and screws or
with fixing clips or with bolts and nuts as required, including fixing of float
glass panes with glazing clips and special metal-sash putty of approved make,
or metal beading with screws (only steel windows with lugs, glass panes cut
to size and glazing clips or metal beading with screws, shall be supplied by
department free of cost.)
81728 1-10-10-1
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block
15x10x10 cm of C.C. 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size)
25.100 kilogram
81729 1-10-10-2
Fixing with carbon steel galvanised dash fastner of required dia and size (to be paid
of separatelu).
9.300 kilogram
1-10-11
Providing and fixing factory made ISI marked steel glazed doors,windows and
ventilators side /top /centre hung with beading and all members such as K11 B and
K12 B etc.complete of standard rolled steel sections, joints mitred and flash butt
welded and sash bars tenoned and riveted with 15x3mm lugs, 10cm long, embedded
in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement:3 coarse sand:6 graded
stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl
plugs and screws or with fixing clips or with bolts and nuts as required,
including providing and fixing of hinges, pivots, float glass panes with glazing
Building Works Based On CPWD
skeleton
- 2014-2015
- puttyPage
61 of 184
clips and
special
metal sash
of approved
make and a priming coat of
16/05/2014 - 1-10
approved steel primer excluding the cost of metal beading and other fittings
except necessary hinges or pivots complete as per approved design.
(Sectional weight of only steel members shall be measured for payment.)
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
including providing and fixing of hinges, pivots, float glass panes with glazing
clips and special metal sash putty of approved make and a priming coat of
approved steel primer excluding the cost of metal beading and other fittings
except necessary hinges or pivots complete as per approved design.
(Sectional weight of only steel members shall be measured for payment.)
81730 1-10-11-1
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block
15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size)
0.000 kilogram
81731 1-10-11-2
Fixing with carbon steel galvanised lash fastener of required dia and size (to be paid
for separately)
0.000 kilogram
1-10-13
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel
Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long
embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and
screws or rawl plugs and screws or with dash fastener or with fixing clips or
with bolts and nuts as require including fixing of necessary butt hinges and
screws and applying a priming coat of approved steel primer.
81732 1-10-13-1
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block
15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size).
0.000 kilogram
81733 1-10-13-2
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid
for separately).
0.000 kilogram
1-10-15
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and
cupboard with L-Type section made of 1.60mm thick M.S. Sheet, joints
mitred and welded and grinded finish profiles required size with 15x3mm lugs
10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with
wooden plugs and screws or rawl plugs and screws or with fixing clips or with
bolts and
nuts as required including fixing of necessary butt hinges and screws and
applying a priming coat of approved steel primers.
81734 1-10-15-1
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block
15x10x10 cm of C.C. 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size).
189.800 kilogram
81735 1-10-15-2
Fixing with carboon steel galvanised dash fastener of required dia and size (to be
paid for separately).
109.700 kilogram
Specification:
Page 62 of 184
16/07/15 12:42
Rate Card
Chapter Name
Flooring
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-11-1
Rate
Unit
Brick on edge flooring with bricks of class designation 75 including cement slurry
etc. complete in
81736 1-11-1-1
912.900
sq.m
81737 1-11-1-2
860.000
sq.m
81738 1-11-2
Dry brick on edge flooring in required pattern with bricks of class designation
75 on a bed of 12 mm mud mortar including filling joints with Jamuna sand
(with F.P.S. bricks) complete.
753.600
sq.m
1-11-3
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate)
finished with a floating coat of neat cement including cement slurry, but excluding
the cost of nosing of steps etc. complete.
81739 1-11-3-1
393.300
sq.m
81740 1-11-4
579.200
sq.m
81741 1-11-5
663.100
sq.m
81742 1-11-7
7,511.500
cu.m
81743 1-11-8
31.800
sq.m
1-11-9
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under
layer 34 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble chips of sizes from lmm to 4mm nominal
size laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight
in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume
including cement slurry etc. complete
81744 1-11-9-1
614.200
sq.m
81745 1-11-9-2
772.200
sq.m
81746 1-11-9-3
Medium shade pigment with 50% white cement and 50% ordinary cement.
768.900
sq.m
Page 63 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81747 1-11-9-4
0.000
sq.m
81748 1-11-9-5
0.000
sq.m
81749 1-11-9-6
0.000
sq.m
1-11-10
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under
layer 3lmm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top layer 9mm thick with white, black,
chocolate,
grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in
cement marble powder mix 3:1 (3 cement: 1 marble powder) by weight in
proportion
of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement
slurry
etc. complete.
81750 1-11-10-1
710.200
sq.m
81751 1-11-10-2
775.600
sq.m
81752 1-11-10-3
Medium shade pigment with 50% white cement and 50% ordinary cement.
741.600
sq.m
81753 1-11-10-4
747.700
sq.m
81754 1-11-10-5
715.200
sq.m
81755 1-11-10-6
716.400
sq.m
1-11-11
81756 1-11-11-1
824.200
sq.m
81757 1-11-11-2
348.500
sq.m
81758 1-11-11-3
Medium shade pigment with 50% white cement and 50% ordinary cement
1,152.600
sq.m
81759 1-11-11-4
793.200
sq.m
81760 1-11-11-5
900.700
sq.m
81761 1-11-11-6
682.600
sq.m
1-11-12
Page 64 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-11-12-1
Rate
Unit
81762 1-11-12-1-1
81763 1-11-12-1-2
81764 1-11-12-1-3
891.800
sq.m
1,048.600
sq.m
Medium shade pigment with 50% white cement and 50% ordinary cement.
913.900
sq.m
81765 1-11-12-1-4
918.100
sq.m
81766 1-11-12-1-5
1,077.100
sq.m
81767 1-11-12-1-6
911.500
sq.m
81768 1-11-14
Extra for laying terrazo flooring on staircase treads not exceeding 30cm in
width including cost of forming, nosing etc.
329.400
sq.m
1-11-16
Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm
laid in floors, and landings, jointed with neat cement slurry mixed with pigment
to match the shade of the tiles including rubbing and polishing complete with
precast tiles on 20mm thick bed of cement mortar 1:4(1 cement :4 coarse sand):
81769 1-11-16-1
470.700
sq.m
81770 1-11-16-2
448.500
sq.m
81771 1-11-16-3
418.400
sq.m
81772 1-11-16-4
426.300
sq.m
81773 1-11-17
Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width.
51.300
sq.m
1-11-18
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in
skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement
plaster 1:3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with
pigment to match the shade of the tiles, including rubbing and polishing complete
with tiles of
81774 1-11-18-1
823.400
sq.m
81775 1-11-18-2
Medium shades using 50% white cement and 50% ordinary cement.
790.000
sq.m
81776 1-11-18-3
751.800
sq.m
81777 1-11-18-4
756.800
sq.m
1,034.100
sq.m
938.400
sq.m
1-11-19
81778 1-11-19-1
81779 1-11-19-2
Page 65 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81780 1-11-19-3
860.500
sq.m
81781 1-11-19-4
790.400
sq.m
1-11-20
81782 1-11-20-1
1,244.400
sq.m
81783 1-11-20-2
1,194.900
sq.m
81784 1-11-20-3
1,190.500
sq.m
81785 1-11-20-4
1,189.000
sq.m
386.100
sq.m
433.600
sq.m
1-11-21
Providing and fixing 10mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding and joints filled
with acid and/or alkali resisting cement as per IS : 4457 complete as per the
direction of Engineer-in- Charge.
1-11-21-1
In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand).
81786 1-11-21-1-1
1-11-21-2
81787 1-11-21-2-2
1-11-23
81788 1-11-23-1
3,602.500
sq.m
81789 1-11-23-2
1,647.600
sq.m
81790 1-11-23-3
Agaria White
2,337.000
sq.m
81791 1-11-23-4
Black Zebra.
1,500.600
sq.m
81792 1-11-23-5
1,902.000
sq.m
81793 1-11-23-6
1,837.900
sq.m
81794 1-11-24
290.700
metre
81795 1-11-25
Extra for marble stone flooring in treads of steps and risers using single
length up to 2.00 metre .
336.700
sq.m
81796 1-11-27
1,094.800
sq.m
1-11-28
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement
mortar 1:5 ( 1 cement: 5 coarse sand) with joints finished flush.
Page 66 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81797 1-11-28-1
525.800
sq.m
81798 1-11-28-2
560.600
sq.m
1-11-29
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement
mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1
cement: 2 stone dust) with an admixture of pigment to match the shade of stone.
81799 1-11-29-1
509.900
sq.m
81800 1-11-29-2
512.700
sq.m
1-11-30
81801 1-11-30-1
705.000
sq.m
81802 1-11-30-2
739.900
sq.m
81803 1-11-31
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
80.400
sq.m
81804 1-11-32
Extra for Kota stone/ sand stone in treads of steps and risers using
single length up to 1.05 metre .
16.100
sq.m
1-11-33
25mm wooden planking, tongued and grooved in flooring including fixing with
iron screws complete with
81805 1-11-33-1
4,260.400
sq.m
81806 1-11-33-2
3,998.900
sq.m
81807 1-11-34
38mm thick wood block flooring of first class teak wood laid over 25mm
thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 10mm nominal size) to be paid separately
coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm.
including fixing blocks in position after dipping in hot bitumen (blown
type) up to half depth, planed, levelled smooth and finished complete.
7,691.500
sq.m
81808 1-11-35
Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs
of M.S. flat 10x5 mm 10cm long forked at end 60cm apart (minimum
three lugs to be provided) including necessary welding and applying a
priming coat of approved primer on exposed surface etc. complete.
81809 1-11-36
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS : 15622 (thickness to be specified by the manufacture ) of approved
make in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge in skirting, risers of steps and
dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse
sand) and jointing with grey cement slurry @ 3.3kg per sqm including
pointing in white cement mixed with pigment of matching shade
complete.
81810 1-11-37
83.700 kilogram
908.000
sq.m
953.200
sq.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81812 1-11-39
81813 1-11-40
1-11-41
972.200
sq.m
1,073.400
sq.m
1,016.100
sq.m
Providing and laying vitrified floor tiles in different sizes (thickness to be specified
by the manufacturer) with water absorptions less than 0.08% and conforming to
IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement
mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement
and matching pigments etc., complete.
81814 1-11-41-1
1,294.300
sq.m
81815 1-11-41-2
1,456.600
sq.m
81816 1-11-41-3
1,693.400
sq.m
81817 1-11-41-4
2,377.600
sq.m
81818 1-11-42
Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) bedding in laying of floor tiles.
441.400
sq.m
81819 1-11-43
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high
polymer modified quick-set tile adhesive (Water based) conforming to
IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm
thickness.
399.300
sq.m
0.000
sq.m
81820 1-11-44
Crazy ceramic tiles flooring, with under layer 12 mm thick cement mortar 1:4 (1
cement : 4 coarse sand), with joints not exceeding 5 mm, inclusing filling the gaps
with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in
shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to
40 micron & length upto 6 mm, mixing fibre @ 125 grams per 50 kg of cement in
Building Works Based On CPWD
2014-2015
Page
68 ofwater
184 proofing material in mortar @
cementskeleton
mortar, -including
providing
and mixing
16/05/2014 - 1-11
1 kg per 50 kg. of cement, all complete as per direction of Engineer-in-charge.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
40 micron & length upto 6 mm, mixing fibre @ 125 grams per 50 kg of cement in
cement mortar, including providing and mixing water proofing material in mortar @
1 kg per 50 kg. of cement, all complete as per direction of Engineer-in-charge.
81821 1-11-45
Providing and laying 500x500x40mm thick Turf paver (Turfpave XD) on 150mm
thick sub grade of compacted bed of 20mm thick nominal size stone aggregated and
base course and filing with 150 mm thick jamuna sand including spreading, well
ramming, consolidating and finishing smooth etc. all complete as per direction of
Engineer-in-charge.
1-11-46
0.000
sq.m
81822 1-11-46-1
1,201.500
sq.m
81823 1-11-46-2
1,718.400
sq.m
81824 1-11-46-3
1,782.900
sq.m
81825 1-11-46-4
3,190.900
sq.m
1-11-47
81826 1-11-47-1
1,360.700
sq.m
81827 1-11-47-2
1,521.200
sq.m
81828 1-11-47-3
1,764.900
sq.m
81829 1-11-47-4
2,436.700
sq.m
1-11-48
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix of 070 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20
kg of resin per kg), including filling / grouting and finishing complete as per
direction of Engineer-in-charge.
81830 1-11-48-1
0.000
sq.m
81831 1-11-48-2
0.000
sq.m
81832 1-11-48-3
0.000
sq.m
81833 1-11-48-4
0.000
sq.m
1-11-49
Providing and laying Vitrified tiles in floor with different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08% and
conforming to IS:15622),of approved brand & manufacturer in all colours and
shade, laid with cement based high polymer midified quick set tiles ahesive (water
based) skeleton
conforming
to IS:15477,
inPage
average
thickness, including grouting of
Building Works Based On CPWD
- 2014-2015
696ofmm
184
joints (payment for grouting of joints to be made separately).
16/05/2014 - 1-11
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
1,305.400
sq.m
81835 1-11-49-2
1,466.000
sq.m
81836 1-11-49-3
1,709.700
sq.m
81837 1-11-49-4
2,711.300
sq.m
81838 1-11-50
Deduct for not grouting the joints with white cement and matching pigment in the
items of vitrified tiles.
0.000
sq.m
317.400
sq.m
41.000
metre
1,053.300
sq.m
857.800
sq.m
1,309.100
sq.m
1-11-6
81839 1-11-6-1
1-11-13
81840 1-11-13-1
1-11-15
81841 1-11-15-1
Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement :
3 coarse sand) finished with a floating coat of neat cement. 18 mm thick
18 mm thick.
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
40 mm wide and 4 mm thick.
40 mm wide and 4 mm thick.
Crazy marble stone flooring including filling the gaps with light shade pigment
with white cement marble powder mixture (3 parts of white cement : 1 part
of marble powder) by weight in proportion of 4:7 (4 cement marble powder
mix : 7 white, black or white and black marble chips of sizes from 1mm to
4mm nominal size by volume) and under layer 25mm thick cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 aded stone aggregate 12.5 mm nominal size)
rubbing, polishing and cement slurry etc. complete :
18 mm thick crazy marble stone white,black or as specified.
1-11-22
Tile work in skirting, risers of steps and dado (up to 2 m height) over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement
slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of
matching shade complete.
1-11-22-1
81842 1-11-22-1-1
1-11-26
81843 1-11-26-1
Specification:
8 mm thick
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with
grey cement slurry mixed with pigment to match the shade of the slab including
rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4
coarse sand) :
25 mm thick.
Page 70 of 184
16/07/15 12:42
Rate Card
Chapter Name
Roofing
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-12-1
Rate
Unit
81844 1-12-1-1
1,124.400
sq.m
81845 1-12-1-2
946.600
sq.m
81846 1-12-1-3
795.200
sq.m
1-12-2
Extra for straight cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 sq. decimeter for chimney stacks, sky light etc.
81847 1-12-2-1
1.00 mm thick
41.300
metre
81848 1-12-2-2
0.80 mm thick
33.100
metre
81849 1-12-2-3
0.63 mm thick
33.100
metre
1-12-3
Extra for circular cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 square decimeter
81850 1-12-3-1
1.00 mm thick
222.600
metre
81851 1-12-3-2
0.80 mm thick
177.800
metre
81852 1-12-3-3
0.63 mm thick
177.800
metre
1-12-4
Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with
polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen
washers complete.
81853 1-12-4-1
617.600
metre
81854 1-12-4-2
541.600
metre
1,163.400
metre
526.600
metre
1-12-5
81855 1-12-5-1
1-12-6
81856 1-12-6-1
1-12-7
Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer
coated
J, or L hooks, bolts and nuts 8mm dia.. G.I. limpet and bitumen washers complete
1.60mm thick with zinc coating not less than 350gm/m
Providing flashing of 40 cm over all width in plain, G.S. sheet fixed with polymer
coated J, or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete,
bent to shape and fixed in wall with cement mortar 1:3 (1 cement: 3 coarse sand).
1.00mm thick with zinc coating not less than 275gm/m
Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter
with iron brackets 40x3mm size, bolts, nuts and washers etc. including making
necessary connections with rain water pipes complete
81857 1-12-7-1
552.400
metre
81858 1-12-7-2
489.100
metre
385.000
sq.m
81859 1-12-8
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia.
G.I. plain and bitumen washers or with self drilling fastener and EPDM
washers etc. complete excluding the cost of purlins, rafters and trusses:
corrugated sheets and including cutting to size and shape wherever
required.
81860 1-12-9
33.100
metre
81861 1-12-10
91.300
metre
81862 1-12-11
Extra for providing and fixing wind ties of 40x 6mm flat iron section.
139.100
metre
1-12-12
Providing and fixing ridges and hips in non-asbestos fibre cement high impact
polypropylene reinforced roofing with suitable fixing accessories or self drilling
fastener and EPDM washer etc. complete
81863 1-12-12-1
326.200
metre
81864 1-12-12-2
326.200
metre
81865 1-12-12-3
371.100
metre
81866 1-12-12-4
438.600
metre
1-12-13
81867 1-12-13-1
294.700
metre
81868 1-12-13-2
204.400
metre
81869 1-12-13-3
337.500
metre
81870 1-12-13-4
ventilator curves
528.400
metre
81871 1-12-13-5
Barge boards
527.000
metre
81872 1-12-13-6
Ridge finials
194.000
pair
81873 1-12-13-7
678.700
each
81874 1-12-13-8
S type louvers
310.500
metre
81875 1-12-14
Providing flat iron brackets 50x3mm size with necessary bolts, nuts and
washers etc. for fixing asbestos cement/G.S. sheets gutters with
purlins.
117.800
metre
1-12-15
Painting top of roofs with bitumen of approved quality at 17kg per 10 sqm
impregnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning
the slab surface with brushes and finally with a piece of cloth lightly soaked in
kerosene
oil complete
Building Works Based On CPWD
skeleton
- 2014-2015 Page 72 of 184
16/05/2014 - 1-12
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
the slab surface with brushes and finally with a piece of cloth lightly soaked in
kerosene oil complete
81876 1-12-15-1
81877 1-12-18
81878 1-12-20
81879 1-12-22
141.100
sq.m
12.600
sq.m
Providing and laying pressed clay tiles (as per approved pattern 20 mm
nominal thickness and of approved size) on roofs jointed with cement
mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water
proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1
cement : 4 coarse sand) and finished neat complete.
634.200
sq.m
196.800
each
442.800
sq.m
471.200
sq.m
561.800
sq.m
677.900
sq.m
619.900
sq.m
632.300
sq.m
1-12-23
Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1
cement: 4 coarse sand) over wooden karries or R.C.C. battens (Karries and
battens to be paid separately) including pointing the ceiling joints with cement
mortar 1:3 (1 cement: 3 fine sand ) complete
1-12-23-1
81880 1-12-23-1-1
1-12-23-2
81881 1-12-23-2-1
1-12-24
Providing and fixing insulating board ceiling of approved quality with necessary
nails etc. complete (frame work to be paid separately)
1-12-24-1
81882 1-12-24-1-1
1-12-24-2
81883 1-12-24-2-1
1-12-24-3
81884 1-12-24-3-1
1-12-25
81885 1-12-25-1
12 mm thick
White face insulating board
White face insulating board 12 mm thick
Flame retardant face insulating board
Flame retardant face insulating board 12 mm thick
Providing and fixing flat pressed 3 layer medium density particle board or graded
particle board (Grade I) IS: 3087 marked in ceiling with necessary nails etc.
complete
(frame work to be paid separately):
12 mm thick
1-12-26
Providing and fixing plain multipurpose cement board (high pressure steam cured )
as
per IS 14862:
with suitable
fibre
cement
in ceiling etc complete, (frame
Building Works Based On CPWD
skeleton2000
- 2014-2015
Page
73 screw
of 184
work to be paid separately ).
16/05/2014 - 1-12
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
per IS 14862: 2000 with suitable fibre cement screw in ceiling etc complete, (frame
work to be paid separately ).
81886 1-12-26-1
1-12-27
1-12-27-1
81887 1-12-27-1-1
1-12-27-2
81888 1-12-27-2-1
1-12-27-3
81889 1-12-27-3-1
1-12-27-4
81890 1-12-27-4-1
1-12-27-5
447.700
sq.m
468.100
metre
202.900
metre
217.300
metre
210.100
metre
81891 1-12-27-5-1
3 mm thick
179.300
metre
81892 1-12-27-5-2
4.5 mm thick
183.200
metre
81893 1-12-28
Extra for providing and fixing ceiling to curved surfaces in narrow widths
163.400
sq.m
81894 1-12-29
367.700
sq.m
81895 1-12-30
363.700
sq.m
1-12-31
Page 74 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81896 1-12-31-1
Flat surfaces
837.200
sq.m
81897 1-12-31-2
Curved surfaces
961.200
sq.m
81898 1-12-32
Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum
anhydrous) ceiling
252.600
sq.m
81899 1-12-33
Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5 metres
hight from floor level
797.500
metre
81900 1-12-34
465.700
sq.m
81901 1-12-35
Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8193. Density 16kg/m3 , 50mm thick, wrapped in
200G Virgin Polythene bags placed over existing false ceiling and held
in position by criss-crossing GI wire.
238.800
sq.m
1-12-36
81902 1-12-36-1
212.400
sq.m
81903 1-12-36-2
244.600
sq.m
63.400
each
1-12-37
81904 1-12-37-1
1-12-38
Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement
Stone ware spout
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain
81905 1-12-38-1
100 mm diameter
151.500
each
81906 1-12-38-2
150 mm diameter
159.200
each
1-12-39
Providing lead caulked joints to sand cast iron rain water pipes and fittings
81907 1-12-39-1
223.700
each
81908 1-12-39-2
307.400
each
347.000
Nos.
1-12-40
Providing, fixing and embedding sand cast iron accessories for rain water pipes
1-12-40-1
81909 1-12-40-1-1
1-12-41
150 mm diameter
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
81910 1-12-41-1
75 mm diameter
178.400
metre
81911 1-12-41-2
110 mm diameter
290.800
metre
1-12-42
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories
1-12-42-1
Coupler
Page 75 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
81912 1-12-42-1-1
75 mm
268.100
each
81913 1-12-42-1-2
110 mm
458.700
each
1-12-42-2
81914 1-12-42-2-1
75 mm
286.900
each
81915 1-12-42-2-2
110 mm
492.700
each
1-12-42-3
81916 1-12-42-3-1
75x75x75 mm
462.500
each
81917 1-12-42-3-2
110x110x110 mm
794.100
each
1-12-42-4
81918 1-12-42-4-1
75x75x75 mm
439.100
each
81919 1-12-42-4-2
110x110x110 mm
733.100
each
1-12-42-5
Bend 87.5
81920 1-12-42-5-1
75 mm bend
191.900
each
81921 1-12-42-5-2
110 mm bend
323.800
each
1-12-42-6
Shoe (Plain)
81922 1-12-42-6-1
75 mm Shoe
251.700
each
81923 1-12-42-6-2
110 mm Shoe
455.100
each
81924 1-12-44
Providing and fixing to the inlet mouth of rain water pipe cast iron
grating 15 cm diameter and weighing not less than 440 grams.
37.600
each
81925 1-12-46
Providing and fixing to the inlet mouth of rain water pipe PTMT (an
Engineering Thermoplastic) grating square (Slit) 150 mm square with a
height of 8 mm and weighing not less than 100 gms
98.600
each
81926 1-12-48
261.100
sq.m
81927 1-12-49
Providing & laying pressed clay tile ridge (Mangalore tile) of 20mm
thickness of approved pattern ceiling over steel frame work complete
(steel frame work to be paid separately).
128.400
sq.m
822.900
sq.m
81928 1-12-50
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
fixed using self drilling /self tapping screws of size (5.5x 55mm) with
EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm
diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead complete upto any pitch in horizontal/
vertical or curved surfaces excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required.
1-12-16
81929 1-12-16-1
1-12-17
81930 1-12-17-1
1-12-19
81931 1-12-19-1
1-12-21
81932 1-12-21-1
1-12-43
0.000
sq.m
0.000
sq.m
0.000
sq.m
367.400
metre
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope
consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg
per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered
with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% of Integral water proofing compound by weight of cement and finished
neat. :
With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class
designation 12.5, conforming to IS 2690
Providing and laying brick tiles over mumty roofs, grouted with cement mortor 1:3
(1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by
weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand)
and finished neat.
With common burnt clay F.P.S. (non modular) brick tiles of class designation 10
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 stone aggregate 10mm and down gauge) including finishing with
cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In
75x75mm deep chase
In 75x75 mm deep chase
Providing and fixing unplasticised -PVC pipe clips of approved design to
unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood
plugs, screwed with M.S. screws of required length including cutting brick
work and fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete. 75 mm
81933 1-12-43-1
75 mm
210.800
each
81934 1-12-43-2
110 mm
197.100
each
1-12-45
Providing and fixing at all height false ceiling including providing and fixing
of frame work made of special frame work made of special sections, power pressed
from M.S. sheets and glavanized with zinc coating of 12 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm
thick with
flanges
of 27 mm- and 37
mm,77
at of
1200
mm centre to centre, one flange
Building Works Based On CPWD
skeleton
- 2014-2015
Page
184
fixed
to
the
celling
with
dash
fastener
12.5
mm
diax
50 mm long with 6 mm dia
16/05/2014 - 1-12
bolts other flanges of cleat fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle hanger fixed with
intermediates G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to
centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each hacing lips of 10.5 mm, at 450 mm centre to centre,
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange
fixed to the celling with dash fastener 12.5 mm diax 50 mm long with 6 mm dia
bolts other flanges of cleat fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle hanger fixed with
intermediates G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to
centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each hacing lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I intermediate channel with
connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every
junction, including fixing perimeter channels 0.5 mm thick 27 mm high having
flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition
with the help of raw plugs at 450 mm centre, with 25 mm long dry wall screws @
230 mm interval, including fixing of gypsum board to ceiling section and perimeter
channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm or both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also including
the cost of making openings for light fittings,grills, diffusers, cutouts made with
frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer -in-charge but excluding the cost of
painting with :
81935 1-12-45-1
12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095- Part I.
0.000
sq.m
81936 1-12-45-2
12.5 mm thick tapered edge gypsum fire resistant board conforming to IS : 2095Part I.
0.000
sq.m
81937 1-12-45-3
0.000
sq.m
81938 1-12-45-4
Fully Perforated Gypsum Plaster Board of size 1200 x 2400 x 12.5 mm having
approx. 155 perforated area with perforation size and pattern as approved by the
Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered
and backed by acoustical tissue with NRC value not less than 0.60
0.000
sq.m
1-12-47
81939 1-12-47-1
2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified
933.900
sq.m
81940 1-12-47-2
2 mm thick flat.
824.900
sq.m
1-12-51
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J
Building Works Based On CPWD
skeleton
- 2014-2015
- or Page
78 of
184
or L hooks,
bolts
and nuts and
G.I. seam
bolts
and nuts, G.I. plain and bitumen
16/05/2014 - 1-12
washers complete :
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J
or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen
washers complete :
81941 1-12-51-1
733.700
metre
81942 1-12-51-2
708.000
metre
81943 1-12-51-3
623.800
metre
81944 1-12-51-4
445.400
metre
81945 1-12-51-5
Crimp curve
489.900
sq.m
81946 1-12-51-6
699.000
metre
1-12-52
81947 1-12-52-1
GI Metal Celling Lay in plain Tegular edge Global white color tiles of size
595x595xmm, and 0.5 mm thick with 8 mm drop made of G.I sheet having
galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester
powder coated of thickness 60 microns (minimun), factory painted after bending.
0.000
sq.m
81948 1-12-52-2
G.I. Metal Celling Lay in perforated Tegular edge global white color tiles of size
595x595 mm and 0.5 mm thick with 8 mm drop, made of GI sheet having
galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with
1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro
statically polyester powder coated of thickness 60 microns (minimum), including
factory painted after bending and perforation and backed with a black Glass fiber
acoustical fleece.
0.000
sq.m
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm,
made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095
part I and laminated with white 0.16 mm thick fire retardant PVC film on the face
side 12skeleton
micron -metalized
on the back side with all edges sealed with the
Building Works Based On CPWD
2014-2015polyester
Page 79 of 184
face
side
PVC
film
which
goes
around
and wraps the edges and is bonded to the
16/05/2014 - 1-12
edges and the back side metalized polyester film so as to make the tile a completely
sealed unit.
0.000
sq.m
81949 1-12-52-3
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
side 12 micron metalized polyester on the back side with all edges sealed with the
face side PVC film which goes around and wraps the edges and is bonded to the
edges and the back side metalized polyester film so as to make the tile a completely
sealed unit.
81950 1-12-52-4
12.5 mm thick fully Perfotated Gypsum Boaed tile made from plasterboard having
glass fibre conforming to IS : 2095 part I, of size 595x595 mm, having perforation
of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of
30 mm backed with non woven tissue on the back side, having an NRC (Noise
Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
0.000
sq.m
81951 1-12-53
Providing and fixing 15 mm thick densified tegular edged eco friendly light weight
calcium sillicate false ceilling tiles of approved texture spintone /cosmos/Hexa or
equivalent of size 595x595 mmm in true horizontal level suspended on inter locking
meral grid of hot dipped galvanised steel sections (galvanising @ 120 grams per
sqm including both side) consisting of main "T" runner suitably spaced at joints to
get required length and of size 24x38 mm made from 0.33 mm thick (minimum)
sheet, spaced 1200 mm centre to centre , and cross "T" of size 24x28 mm made out
of 0.33 mm (Minimum) sheer, 1200 mm long spaced between main "T" at 600 mm
centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length
600 mm and size 24x28 mm made of 0.33 mm thick (Minimum) sheet to be inter
locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm,
resting on periphery walls/ partitions on a Perimeter wall angle Precoated steel of
size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with help of raw/
plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm
interval and laying 15 mm thick densified edges calicum sillicate ceilling tiles of
approved texture (Spinstone/Cosmos/hexa) in the grid inclusing, cutting/making
opening for services like diffusers, grills,light,fitting, fixtures, smoke detectors etc.,
whereever required, Main "T" runners to be suspended from ceilling using G.I.
slotted cleats of size 25x35x1.6 mm fixed to ceilling with 12.5 mm dia and 50 mm
long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of
size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main "T" bottom
exposed with 24 mm of all T-sections shall be pre-painted with polyster baked painr,
for all heights, as per specifications, drawings and as directed by
Engineer-in-charge.
NOTE :- Only calcium sillicate false ceilling area will be measured from wall to
wall. No deduction shall be made for exposed frames/opening (cut outs) having area
less than 0.30 sqm. The calcium sillicate ceilling tile shall have NRC. value of 0.
50(Minimum),light reflection >85% , non - combustible as per B.S. 476 part IV,
100% humidity resistance and also having thermal conductivity <0.043w/m 0 KC.
0.000
sq.m
1-12-54
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
mm centers with help of suspension brackets. Whereever the main C carrier and
spring T have to join, C carrier and spring T connectors have to be used. All sections
to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in tiles into
spring "T" with :
81952 1-12-54-1
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size
600x600 and 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing
of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated
of thickness 60 microns (minimum), including factory painted after bending.
0.000
sq.m
81953 1-12-54-2
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size
600x600 and 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing
of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia
holes and having NRC of 0.5, electro statically polyester powder coated of
thickness 60 microns (minimum), including factory painted after bending and
perforation.
0.000
sq.m
81954 1-12-55
Providing and fixing Heat Resistant Terrace Tiles (300mmx300 mmx20 mm) with
SRI (solar refractive index)>78, solar reflection>0.70 and initial emittance > 0.75 on
waterproof and sloped surface of terrace. laid on 20 mm thick cement sand mortar in
the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white
cement & marble powder in ratio of 1:1, including rubbing and polishing of the
surface upto 3 cuts complete, including providing skirting upto 150 mm height along
the parapet walls in the same manner.
0.000
sq.m
81955 1-12-56
Providng and laying roof insulation with 40 mm thick impervious sprayed, closed
cell free Rigid Polyurethane foam over deck insulation conforming to IS- 12432 Pt.
III (density of form being 40-45 kg/cum), over a coat of polyurethane primer applied
@ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a
wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4
stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x
2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized
mastic, all complete as per direction of Engineer - in - charge.
0.000
sq.m
81956 1-12-57
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool
conforming to IS : 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200 G
Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in
position by criss crossing GI wire etc. complete as per directions of
Engineer-in-Charge.
0.000
sq.m
Specification:
Page 81 of 184
16/07/15 12:42
Rate Card
Chapter Name
Finishing
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-13-1
Rate
Unit
81957 1-13-1-1
162.000
sq.m
81958 1-13-1-2
144.500
sq.m
1-13-2
81959 1-13-2-1
189.400
sq.m
81960 1-13-2-2
168.500
sq.m
1-13-3
81961 1-13-3-1
213.800
sq.m
81962 1-13-3-2
204.300
sq.m
1-13-4
81963 1-13-4-1
163.000
sq.m
81964 1-13-4-2
145.500
sq.m
1-13-5
81965 1-13-5-1
190.600
sq.m
81966 1-13-5-2
169.600
sq.m
1-13-6
81967 1-13-6-1
233.100
sq.m
81968 1-13-6-2
205.800
sq.m
1-13-7
81969 1-13-7-1
208.600
sq.m
81970 1-13-7-2
193.200
sq.m
1-13-8
15 mm cement plaster on rough side of single or half brick wall finished with a
floating coat of neat cement of mix
81971 1-13-8-1
251.000
sq.m
81972 1-13-8-2
231.300
sq.m
1-13-9
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
cement.
81973 1-13-9-1
209.200
sq.m
81974 1-13-9-2
20 mm cement plaster
282.000
sq.m
253.500
sq.m
81975 1-13-10
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
wall.
81976 1-13-11
230.500
sq.m
81977 1-13-12
232.400
sq.m
81978 1-13-13
213.200
sq.m
81979 1-13-14
15 mm cement plaster 1:2 (1 cement: 2 stone dust) on the rough side of single or
half brick wall.
250.500
sq.m
81980 1-13-15
311.100
sq.m
1-13-16
81981 1-13-16-1
126.800
sq.m
81982 1-13-17
172.000
sq.m
81983 1-13-18
43.700
sq.m
1-13-19
Rough cast plaster upto 10m height above ground level with a mixture of sand and
gravel or crushed stone from 6mm to 10mm nominal size dashed over and including
the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4
coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by volume of cement.
81984 1-13-19-1
413.100
sq.m
81985 1-13-20
Pebble dash plaster upto 10m height above ground level with a mixture
of washed pebble or crushed stone 6mm to 12.5mm nominal size
dashed over and including fresh plaster in two layers under layer 12mm
cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm
cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed
with 10% finely grounded hydrated lime by volume of cement.
371.800
sq.m
81986 1-13-21
Extra for providing and mixing water proofing material in cement plaster work in
proportion recommended by the manufacturers.
39.000
sq.m
81987 1-13-22
Extra for plastering exterior walls of height more than 10 m from ground
level for every additional height of 3 m or part thereof.
34.100
sq.m
1-13-23
81988 1-13-23-2
In two coats
26.900
sq.m
81989 1-13-23-1
In one coat
17.600
sq.m
1-13-24
Extra for plastering done on moulding cornices or architraves including neat finish
to line and level
Building Works Based On CPWD skeleton - 2014-2015 Page 83 of 184
16/05/2014 - 1-13
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
In one coat
252.100
sq.m
81991 1-13-24-2
In two coats
415.900
sq.m
1-13-25
81992 1-13-25-1
Spherical ceiling
65.600
sq.m
81993 1-13-25-2
Groined ceiling
71.400
sq.m
81994 1-13-25-3
Flewing soffits
43.000
sq.m
81995 1-13-26
108.500
sq.m
81996 1-13-27
Extra for lining out plaster to imitate stone or concrete blocks walling
40.700
sq.m
1-13-28
12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine
sand)
81997 1-13-28-1
Flush Band
3.000
metre
81998 1-13-28-2
Sunk Band
3.200
metre
81999 1-13-28-3
Raised Band
3.800
metre
82000 1-13-28-4
Moulded Band
6.200
metre
1-13-29
18 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine
sand)
82001 1-13-29-1
Flush Band
3.900
metre
82002 1-13-29-2
Sunk Band
4.200
metre
82003 1-13-29-3
Raised Band
4.700
metre
82004 1-13-29-4
Moulded Band
8.400
metre
82005 1-13-30
18 mm thick moulded cement mortar band in two coats under layer 12mm thick with
cement mortar 1:5 (1cement: 5 coarse sand) top layer 6mm thick with cement mortar
1:4 (1 cement: 4 fine sand).
8.300
metre
1-13-31
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine
sand)
94.100
sq.m
157.000
sq.m
129.700
sq.m
134.000
sq.m
82006 1-13-31-1
82007 1-13-31-2
1-13-32
82008 1-13-32-1
1-13-33
82009 1-13-33-1
Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand)
Flush/ Ruled/ Struck or weathered pointing
Pointing on stone work with cement mortar 1:3 (1 cement :3 fine sand)
Flush/ Ruled pointing
Page 84 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82010 1-13-33-2
247.800
sq.m
82011 1-13-34
Raised and cut pointing on stone work in white cement mortar 1:3 (1
white cement: 3 marble dust)
270.500
sq.m
82012 1-13-35
Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine
sand): Flush/ Ruled pointing
76.600
sq.m
82013 1-13-36
Extra for pointing on walls on the outside at height more than 10 m from
ground level for every additional height of 3 m or part there of
5.300
sq.m
82014 1-13-38
5.200
sq.m
1-13-39
82015 1-13-39-1
New work (two or more coats) with a base coat of white washing with lime
17.700
sq.m
82016 1-13-39-2
17.900
sq.m
82017 1-13-40
59.100
sq.m
99.000
sq.m
54.700
sq.m
36.900
sq.m
52.900
sq.m
140.400
sq.m
70.000
sq.m
65.200
sq.m
1-13-41
82018 1-13-41-1
1-13-42
82019 1-13-42-1
1-13-43
82020 1-13-43-1
1-13-44
82021 1-13-44-1
1-13-45
82022 1-13-45-1
1-13-46
82023 1-13-46-1
1-13-47
82024 1-13-47-1
New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base
coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
Building Works Based On CPWD skeleton - 2014-2015 Page 85 of 184
16/05/2014 - 1-13
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Finishing walls with Deluxe Multi surface paint system for interiors and exteriors
using Primer as permanufacturers specifications
82025 1-13-48-1
Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of
Special primer applied @0.75 ltr/10 sqm.
82026 1-13-48-2
101.100
sq.m
88.000
sq.m
82027 1-13-48-3
88.700
sq.m
82028 1-13-49
Extra for applying water proofing cement paint as primer applied @ 2.2
kg/ 10 sqm instead of primer for exterior finishing in Item No. 13.48.1
-0.600
sq.m
1-13-50
82029 1-13-50-1
With ready mixed pink or Grey primer of approved brand and manufacture on wood
work (hard and soft wood)
33.500
sq.m
82030 1-13-50-2
42.200
sq.m
82031 1-13-50-3
32.200
sq.m
82032 1-13-50-4
18.200
sq.m
1-13-52
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer specifications including appropriate priming coat,preparation
of surface, etc. complete.
82033 1-13-52-1
On Steel work
122.000
sq.m
82034 1-13-52-2
On concrete work
121.100
sq.m
87.100
sq.m
30.600
sq.m
25.700
sq.m
1-13-53
82035 1-13-53-1
1-13-54
82036 1-13-54-1
82037 1-13-54-2
Painting on G.S. sheet with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade
New work (two or more coats) including a coat of approved steel primer but
excluding a coat of mordant solution.
Applying a coat of mordant solution on G.S. sheet
With a solution of 38 gms of copper acetate in a litre of soft water
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint approved brand and manufacture over and
including a priming coat of readymixed zinc chromate yellow primer on
new work
82038 1-13-55-1
34.200
metre
82039 1-13-55-2
51.000
metre
1-13-56
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings
with synthetic enamel paint of approved brand and manufacture and required colour
over a priming coat of approved steel primer on new work.
82040 1-13-56-1
41.500
metre
82041 1-13-56-2
61.900
metre
22.000
sq.m
287.600
sq.m
23.200
sq.m
93.000
sq.m
79.200
sq.m
111.800
sq.m
78.500
sq.m
59.500
sq.m
1-13-57
Painting with oil type wood preservative of approved brand and manufacture
82042 1-13-57-1
82043 1-13-58
82044 1-13-59
Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per
sqm in the first coat and second coat respectively.
1-13-60
82045 1-13-60-1
1-13-61
82046 1-13-61-1
1-13-62
82047 1-13-62-1
1-13-63
82048 1-13-63-1
1-13-64
82049 1-13-64-1
Wall painting with plastic emulsion paint of approved brand and manufacture to
give an even shade
Two or more coats on new work
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade
Two or more coats on new work
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade
Two or more coats on new work over an under coat of suitable shade with ordinary
paint of approved brand and manufacture.
Painting with aluminium enamel paint of approved brand and manufacture to give
an even shade
Two or more coats on new work
Painting with acid proof paint of approved brand and manufacture to give an even
shade
Two or more coats on new work
Page 87 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-13-65
82050 1-13-65-1
1-13-66
82051 1-13-66-1
1-13-67
Rate
Unit
57.000
sq.m
68.700
sq.m
Floor Painting with floor enamel paint of approved brand and manufacture to give
an even shade
Two or more coats on new work.
Varnishing with varnish of approved brand and manufacture
82052 1-13-67-1
Two or more coats of glue sizing with copal varnish over an under coat of flatting
varnish.
125.900
sq.m
82053 1-13-67--2
114.600
sq.m
208.800
sq.m
1-13-68
82054 1-13-68-1
1-13-69
82055 1-13-69-1
New work
77.500
sq.m
82056 1-13-70
37.100
sq.m
82057 1-13-71
37.900
metre
82058 1-13-72
Washed stone grit plaster on exterior walls of height upto 10 M. above level in
two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand )
furrowing the under layer with scratching tool,applying cement slurry on the
under layer @ 2 Kg of cement per square metre,top layer 15mm cement plaster
1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels
with groove all around as per approved pattern including scrubbing and washing,
the top layer with brushes and water to expose the stone chippings ,complete as
per specification and direction of Engineer-in- charge (Payment for providing
grooves shall be made separately).
558.200
sq.m
1-13-73
Forming groove of uniform size in the top layer of washed stone grit plaster as per
approved pattern using wooden battens, nailed to the under layer including removal
of wooden battens, repair to the edges of panels and finishing the groove complete
as per specifications and direction of the Engineer-in-charge
82059 1-13-73-1
30.100
metre
82060 1-13-73-2
30.800
metre
82061 1-13-74
Extra for washed grit plaster on exterior walls of height more than 10m from
ground level for every additional height of 3 m or part thereof.
77.800
sq.m
82062 1-13-75
Extra for washed stone grit plaster on circular work not exceeding 6m in
radius (in two coats).
52.100
sq.m
Page 88 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82063 1-13-76
82064 1-13-77
Rate
Unit
30.200
metre
Extra for using white cement in place of ordinary cement in the top layer
of the item of washed st
100.900
sq.m
82065 1-13-78
238.600
sq.m
82066 1-13-79
Extra for addition of synthetic polyster triangular fibre of length 6mm, effective
diameter of 10-40 microns and specific gravity of 1.34 to 1.40 in cement
concrete/RCC/Flooring/Water retaining structure by using 125 gms of synthetic
polyster triangular fibre for 50 kg cement used as per directions of engineer in
charge.(Rates are for per kg of cement used in the plaster)
1-13-37
82067 1-13-37-1
1-13-51
1.100 kilogram
0.000
sq.m
Painting with silicon & acrylic emulsion based water thinnable sealer of approved
brand and manufacture on wet or patchy portion of plastered surfaces :
82068 1-13-51-1
One Coat
0.000
sq.m
82069 1-13-51-2
Two Coats
0.000
sq.m
82070 1-13-80
0.000
sq.m
1-13-81
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic
Compound) content less than 50 grams/litre of approved brand and manufacture,
including applying additional coats wherever required, to achieve even shade and
colour.
82071 1-13-81-1
One Coat
0.000
sq.m
82072 1-13-81-2
Two Coat
0.000
sq.m
1-13-82
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound) content less than 50 grams/litre, of approved brand and manufacture,
including applying additional coats wherever required , to achieve even shade and
colour.
82073 1-13-82-1
One Coat
0.000
sq.m
82074 1-13-82-2
Two Coat
0.000
sq.m
1-13-83
Wall painting with premium acrylic emulsion paint f interior grade, having VOC
(Volatile Organic Compound) content less than 50grams/litre. of approved brand
and manufacture , including applying additional coats wherever required to achieve
even shade and colour.
Page 89 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-13-84
Rate
Unit
Panting with synthetic enamel paint, having VOC (Volatile Organic Compound)
content less than 150 grams/litre. of approved brand and manufacture, including
applying additional coats wherever required to achieve even shade and colour.
82075 1-13-84-1
One coat.
0.000
sq.m
82076 1-13-84-2
Two coat.
0.000
sq.m
1-13-85
Applying priming coats with primer of approved brand and manufacture, having low
VOC (Volatile Organic Compound) content.
82077 1-13-85-1
With ready mixed pink or grey primer on wood work (hard and soft wood) having
VOC content less than 50 grams/litre.
0.000
sq.m
82078 1-13-85-2
With ready mixed red oxide zinc chromatic on steel/iron works having VOC content
less than 250 grams/litre.
0.000
sq.m
82079 1-13-85-3
With water thinnable cement primer on wall surface having VOC content less than
50 grams/litre.
0.000
sq.m
Specification:
Page 90 of 184
16/07/15 12:42
Rate Card
Chapter Name
Repairs to Buildings
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-14-1
Rate
Unit
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres
82080 1-14-1-1
242.600
sq.m
82081 1-14-1-2
240.900
sq.m
1-14-2
82082 1-14-2-1
Door chowkhats
777.100
each
82083 1-14-2-2
Window chowkhats
475.500
each
82084 1-14-2-3
325.700
each
82085 1-14-3
152.100
each
431.000
sq.m
1-14-4
82086 1-14-4-1
1-14-5
82087 1-14-5-1
700.200
sq.m
82088 1-14-5-2
982.800
sq.m
907.700
sq.m
1,190.300
sq.m
727.200
sq.m
1,009.800
sq.m
1-14-6
82089 1-14-6-1
82090 1-14-6-2
1-14-7
82091 1-14-7-1
82092 1-14-7-2
1-14-8
82093 1-14-8-1
165.300
metre
82094 1-14-8-2
140.800
metre
Page 91 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82095 1-14-9
22.200
metre
82096 1-14-10
230.500
sq.m
82097 1-14-11
Fixing old glass panes with wooden fillets (excluding cost of fillets)
184.100
sq.m
82098 1-14-12
234.100
each
82099 1-14-13
279.500
sq.m
508.500
sq.m
82,422.200
cu.m
92,021.300
cu.m
1,17,907.
cu.m
92,414.700
cu.m
1,18,303.
cu.m
20.000
sq.m
1-14-14
82100 1-14-14-1
1-14-15
82101 1-14-15-1
Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement: 4 coarse
sand) including necessary repairs and cement pointing with same mortar complete
including disposal of rubbish to dumping ground within 50 metres of lead
Red/ white sand stone slabs 30 to 50 mm thick.
Renewing wooden battens in roofs, including making good the holes in wall and
painting with oil type wood preservative of approved brand and manufacture
complete including removal of rubbish to the dumping ground within 50 metres
lead
Sal wood battens.
1-14-16
Renewing wooden beams in roofs including making good the holes in walls and
painting with oil type wood preservative of approved brand and manufacture
complete including removal of rubbish to the dumping ground within 50 metres
lead
1-14-16-1
82102 1-14-16-1-1
82103 1-14-16-1-2
1-14-16-2
Renewing wooden beams(above 4.00 metres and upto 5.00 metres length).
82104 1-14-16-2-1
Renewing sal wood beams(above 4.00 metres and upto 5.00 metres length).
82105 1-14-16-2-2
Renewing Sheesham wood beams(above 4.00 metres and upto 5.00 metres length).
82106 1-14-17
Raking out joints in lime or cement mortar and preparing the surface for
re-pointing or replastering including disposal of rubbish to the dumping
ground within 50 metres lead.
1-14-18
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight of cement for flat tile bricks on top of
mud phaska
Page 92 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82107 1-14-18-1
52.200
sq.m
82108 1-14-18-2
53.300
sq.m
82109 1-14-19
Taking out wind ties from roof including cutting out rusted bolts, nuts
etc. and removing materials to any distance within compound and
stacking.
82110 1-14-20
Fixing of old wind tie with new fittings including painting two or more
coats with anticorrosive bitumastic paint of approved brand &
manufacturer over and including priming coat of ready mixed zinc
chromate yellow primer of approved brand.
544.900
82111 1-14-21
149.300 kilogram
1-14-22
1.800 kilogram
metre
Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and
fixing the same with necessary clamps, nuts and bolts/welding and erection etc.
complete.
82112 1-14-22-1
124.800
cm
82113 1-14-22-2
197.100
cm
82114 1-14-23
Pumping out water caused by springs,tidal or river seepage, broken water mains or
drains and the like.
82115 1-14-24
Mud mortar
535.500
cu.m
82116 1-14-25
5,618.800
cu.m
1-14-26
1-14-26-1
82117 1-14-26-1-1
3,428.900
sq.m
82118 1-14-26-1-2
3,491.900
sq.m
1-14-26-2
Glazed shutters
82119 1-14-26-2-1
Superior class teak wood including nickel plated bright finished M.S. piano
hinges with necessary screws.
3,520.900
sq.m
82120 1-14-26-2-2
3,588.700
sq.m
1-14-27
Providing and fixing plain jaffri door and window shutters including bright or/and
black enamelled M.S. butt hinges with necessary screws 35xl0mm laths placed
35mm apart (frames to be paid separately) including fixing 50x12mm beading
complete with
Page 93 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82121 1-14-27-1
1-14-28
Rate
Unit
1,610.600
sq.m
Providing and fixing curtain rods of 1.25mm thick brass plates with two brass
brackets fixed with brass screws and wooden plugs etc. wherever necessary
complete.
82122 1-14-28-1
20 mm diameter.
158.100
metre
82123 1-14-28-2
25 mm diameter.
180.400
metre
82124 1-14-29
Providing and fixing M.S. round or square bars with M.S. flats at required spcing in
wooden frames of windows and clerestory windows.
1-14-30
Providing joists (karries) including hoisting fixing in position and applying wood
preservative on unexposed surface etc.complete with
82125 1-14-30-1
Sal wood.
82126 1-14-30-2
Sheesham wood.
1-14-31
67.500 kilogram
81,685.400
cu.m
1,05,234.
cu.m
Providing and fixing bright finished brass single acting spring hinges with necessary
screws etc. complete
82127 1-14-31-1
150 mm
398.700
each
82128 1-14-31-2
125 mm
340.000
each
82129 1-14-31-3
100 mm
219.000
each
1-14-32
Providing and fixing bright finished brass double acting spring hinges with
necessary
screws etc. complete
82130 1-14-32-1
150 mm
633.300
each
82131 1-14-32-2
125 mm
457.300
each
82132 1-14-32-3
100 mm
394.900
each
1-14-33
Providing and fixing bright finished brass flush bolts with necessary screws
etc.complete
82133 1-14-33-1
250 mm
182.400
each
82134 1-14-33-2
150 mm
157.100
each
82135 1-14-33-3
100 mm
116.100
each
82136 1-14-34
Providing and fixing 150 mm bright finished floor brass door stopper
with rubber cushion, screws etc. to suit shutter thickness complete
200.800
each
1-14-35
Providing and fixing bright finished brass hard drawn hooks and eyes
82137 1-14-35-1
300 mm
85.500
each
82138 1-14-35-2
250 mm
82.600
each
82139 1-14-35-3
200 mm
76.700
each
Page 94 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82140 1-14-35-4
150 mm
73.800
each
82141 1-14-35-5
100 mm
62.100
each
82142 1-14-36
Providing and fixing bright finished brass fan light pivot with necessary
screws etc. complete.
34.300
each
82143 1-14-37
Providing and fixing 300 mm long bright finished brass chain with hook
for fan light including necessary screws etc. complete.
45.200
each
82144 1-14-38
Providing and fixing bright finished brass quadrant stay 300mm long
with necessary screws etc. complete.
150.800
each
82145 1-14-39
Providing and fixing bright finished brass helical door spring (superior
quality).
390.800
each
1-14-40
Providing and fixing chromium plated brass butt hinges with necessary screws
etc. complete.
82146 1-14-40-1
133.100
each
82147 1-14-40-2
108.200
each
82148 1-14-40-3
132.800
each
82149 1-14-40-4
71.200
each
82150 1-14-40-5
30.900
each
82151 1-14-41
Providing and fixing 85x42mm chromium plated brass pull bolt lock with
necessary screws, nuts, bolts and washers etc. complete.
141.900
each
82152 1-14-43
5.800
sq.m
82153 1-14-44
31.400
sq.m
82154 1-14-46
Removing dry or oil bound distemper, water proofing cement paint and
the like by scrapping, sand papering and preparing the surface smooth
including necessary repairs to scratches etc. complete.
7.700
sq.m
82155 1-14-48
Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture over and including a priming coat of ready mixed zinc
chromate yellow primer on new work : 75 mm diameter pipes
25.600
metre
82156 1-14-54
51.300
sq.m
82157 1-14-61
Painting (one or more coats) with black Japan paint of approved brand
and manufacture to give an even shade.
40.200
sq.m
Page 95 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82158 1-14-70
86.400
sq.m
82159 1-14-71
54.100
sq.m
82160 1-14-72
Providing and fixing double scaffolding system (cup lock type) on the
exterior side, up to seven story height made with 40mm dia. M.S. tube
1.5 m centre to centre horizontal & vertical tubes joining with cup & lock
system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.
staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required duration as
approved and removing it there after .The scaffolding system shall be
stiffened with bracings, runners, connection with the building etc
wherever required for inspection of work at required locations with
essential safety features for the workmen etc. complete as per
directions and approval of Engineer-in-charge .The lavational area of
the scaffolding shall be measured for payment purpose .The payment
will be made once irrespective of duration of scaffolding.
308.800
sq.m
82161 1-14-68-2
Painting(one or more coats) on rain water,soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint approved brand and manufacture on old work :
150 mm diameter pipes
21.900
metre
82162 1-14-42-1
8.100
sq.m
82163 1-14-42-2
50.100
sq.m
82164 1-14-67-1
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade Old work (Two or more coats applied @ 1.43 ltr/
10 sqm)
over existing cement paint surface.
71.100
sq.m
82165 1-14-68-1
Painting(one or more coats) on rain water,soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint approved brand and manufacture on old work :
100 mm diameter pipes
15.300
metre
1-14-42
82166 1-14-42-1
8.100
sq.m
82167 1-14-42-2
5.000
sq.m
1-14-51
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings
with synthetic enamel paint of approved brand and manufacture and required
colour on old work :
82168 1-14-51-1
75 mm diameter pipes
14.900
sq.m
82169 1-14-51-2
19.300
sq.m
82170 1-14-51-3
27.700
sq.m
82171 1-14-60
1.400
cm
Page 96 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-14-45
82172 1-14-45-1
1-14-47
82173 1-14-47-1
1-14-48
82174 1-14-48-1
1-14-49
Rate
Unit
28.000
sq.m
0.000
sq.m
0.000
metre
Painting on G.S. sheet with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : Old work (one or more
coats)
Old work (one or more coats)
Painting (two or more coats) on rain water, soil, waste and vent pipes and
fittings with black anticorrosive bitumastic paint of approved brand and
manufacture over and including a priming coat of ready mixed zinc chromate
yellow primer on new work :
75 mm diameter pipes
Painting (one or more coats) on rain water, soil, waste and vent pipes and
fittings with black anticorrosive bitumastic paint of approved brand and
manufacture on old work :
82175 1-14-49-1
75 mm diameter pipes
0.000
metre
82176 1-14-49-2
0.000
metre
82177 1-14-49-3
0.000
metre
1-14-50
Painting (two or more coats) on rain water, soil, waste and vent pipes and
fittings with aluminium paint of approved brand and manufacture over a
priming coat of ready mixed zinc chromate yellow primer on new work :
82178 1-14-50-1
75 mm diameter pipes
0.000
metre
82179 1-14-50-2
0.000
metre
82180 1-14-50-3
0.000
metre
0.000
sq.m
0.000
sq.m
0.000
sq.m
0.000
sq.m
1-14-52
82181 1-14-52-1
1-14-53
82182 1-14-53-1
1-14-55
82183 1-14-55-1
1-14-56
82184 1-14-56-1
Painting with oil type wood preservative of approved brand and manufacture :
Old work (one or more coats)
Wall painting with plastic emulsion paint of approved brand and manufacture
to give an even shade :
One or more coats on old work.
Painting with aluminium paint of approved brand and manufacture to give an
even shade :
One or more coats on old work.
Painting with acid proof paint of approved brand and manufacture of required
colour to give an even shade :
One or more coats on old work.
Page 97 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-14-57
82185 1-14-57-1
1-14-58
82186 1-14-58-1
1-14-59
82187 1-14-59-1
1-14-62
Rate
Unit
0.000
sq.m
0.000
sq.m
0.000
sq.m
82188 1-14-62-1
32 mm dia
0.000
each
82189 1-14-62-2
40 mm dia
0.000
each
0.000
sq.m
1-14-63
82190 1-14-63-1
1-14-64
82191 1-14-64-1
Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat
of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
0.000
sq.m
82192 1-14-64-2
0.000
sq.m
1-14-65
82193 1-14-65-1
Old work (Two or more coats on existing cement paint surface applied @ 3.28
ltr/10 sqm.
0.000
sq.m
82194 1-14-65-2
0.000
sq.m
1-14-66
82195 1-14-66-1
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement
paint surface).
0.000
sq.m
82196 1-14-66-2
0.000
sq.m
1-14-69
82197 1-14-69-1
0.000
sq.m
82198 1-14-69-2
0.000
sq.m
82199 1-14-73
Providing and fixing bright finished brass casement window fasteners or peg stay to
windows/ventilators with necessary welding and machine screws etc. complete
0.000 kilogram
82200 1-14-74
Providing and fixing 14 mm bright finished brass spring catch to steel centre hung
ventilators with necessary welding and machine screws etc. complete.
Building Works Based On CPWD skeleton - 2014-2015 Page 98 of 184
16/05/2014 - 1-14
0.000
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Page 99 of 184
16/07/15 12:42
Rate Card
Chapter Name
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82201 1-15-1
1-15-2
Rate
Unit
237.500
cu.m
82202 1-15-2-1
680.900
cu.m
82203 1-15-2-2
419.500
cu.m
82204 1-15-3
993.400
cu.m
82205 1-15-4
887.000
cu.m
82206 1-15-5
430.300
sq.m
82207 1-15-6
1-15-7
3.200 kilogram
82208 1-15-7-1
In mud mortar
196.800
cu.m
82209 1-15-7-2
496.100
cu.m
82210 1-15-7-3
In lime mortar
237.500
cu.m
82211 1-15-7-4
In cement mortar
574.500
cu.m
1-15-8
Removing mortar from bricks and cleaning bricks including stacking within a lead
of 50 m (stacks of cleaned bricks shall be measured)
82212 1-15-8-1
82213 1-15-8-2
82214 1-15-8-3
1-15-9
82215 1-15-9-1
In lime mortar
323.600
cu.m
82216 1-15-9-2
In cement mortar
685.500
cu.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-15-10
Rate
Unit
Dismantling dressed stone work ashlar face stone work, marble work or precast
concrete work manually/by machanical means including stacking of serviceable
and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge
82217 1-15-10-1
In lime mortar
409.400
cu.m
82218 1-15-10-2
In cement mortar
801.700
cu.m
1-15-11
Removing mortar from and cleaning stones and concrete articles (net quantity of
stacks of cleaned material will be measured):
82219 1-15-11-1
In lime mortar
401.400
cu.m
82220 1-15-11-2
In cement mortar
434.500
cu.m
1-15-12
82221 1-15-12-1
132.700
each
82222 1-15-12-2
222.100
each
1-15-13
Taking out doors, windows and clerestory window shutters (steel or wood) including
stacking within 50 metres lead
82223 1-15-13-1
50.100
each
82224 1-15-13-2
67.000
each
1,641.200
cu.m
6.600
metre
217.200
cu.m
0.600
metre
301.200
cu.m
1.200
metre
1-15-14
Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span
and 5 metres height including stacking the material within 50 metres lead
82225 1-15-14-1
82226 1-15-14-2
1-15-15
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional
span of one metre or part thereof beyond 10 metres
82227 1-15-15-1
82228 1-15-15-2
1-15-16
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional
height of one metre or part thereof beyond 5 metres
82229 1-15-16-1
82230 1-15-16-2
1-15-17
82231 1-15-17-1
R.S. Joists
0.800 kilogram
Page 101 of 184
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82233 1-15-18
1.800 kilogram
82234 1-15-19
1.100 kilogram
82235 1-15-20
Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional
span of one metre or part thereof beyond 10 metres
0.200 kilogram
82236 1-15-21
Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional
height of one metre or part thereof beyond 5 metres.
0.200 kilogram
82237 1-15-22
1.700 kilogram
1-15-23
Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metre lead.
82238 1-15-23-1
31.700
sq.m
82239 1-15-23-2
43.200
sq.m
82240 1-15-24
368.700
cu.m
82241 1-15-25
74.800
sq.m
82242 1-15-26
40.000
sq.m
82243 1-15-27
254.900
cu.m
1-15-28
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking
the material within 50 metres lead of
82244 1-15-28-1
G.S. Sheet
56.200
sq.m
82245 1-15-28-2
Asbestos sheet
25.900
sq.m
82246 1-15-29
748.400
cu.m
82247 1-15-30
71.400
sq.m
59.100
sq.m
82248 1-15-31
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82250 1-15-33
1-15-34
16.400
sq.m
5.800
metre
Dismantling and stacking within 50 metres lead, fencing posts or struts including
all earth work and dismantling of concrete etc. in base of
82251 1-15-34-1
80.600
each
82252 1-15-34-2
R.C.C.
94.000
each
82253 1-15-35
8.300
each
82254 1-15-36
10.300 kilogram
82255 1-15-37
20.200
sq.m
82256 1-15-38
23.400
sq.m
1-15-39
82257 1-15-39-1
Up to 10 mm thick
20.400
sq.m
82258 1-15-39-2
Thickness above 10 mm up to 25 mm
26.200
sq.m
82259 1-15-39-3
Thickness above 25 mm up to 40 mm
30.400
sq.m
83.800
sq.m
125.500
sq.m
20.100
sq.m
1-15-40
Dismantling precast conerete or stone slab in walls, partition walls etc, including
stacking within 50 metres lead.
82260 1-15-40-1
Thickness up to 40 mm
82261 1-15-40-2
Thickness above 40 mm up to 75 mm
82262 1-15-41
1-15-42
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including
stacking the material within 50 metres lead
82263 1-15-42-1
75 to 80 mm dia pipe.
21.100
metre
82264 1-15-42-2
21.200
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82265 1-15-42-3
1-15-43
Unit
22.500
metre
63.100
sq.m
122.200
sq.m
82266 1-15-43-1
82267 1-15-43-2
bituminous road
1-15-44
Rate
Dismantling G.I. pipes (external work) including excavation and refilling trenches
after taking out the pipes manually / by machanical means including stacking of
pipes within 50 metres lead as per direction of Engineer-in-charge
82268 1-15-44-1
15 mm to 40 mm nominal bore
45.500
metre
82269 1-15-44-2
52.700
metre
1-15-45
Dismantling C.I. pipes including excavation and refilling trenches after taking out
the pipes manually / by machanical means, breaking lead caulked joints, melting of
lead and making into blocks including stacking of pipes, lead at site within 50 metre
lead as per direction of Engineer-in-charge
82270 1-15-45-1
Up to 150 mm diameter
117.800
metre
82271 1-15-45-2
156.500
metre
82272 1-15-45-3
210.900
metre
1-15-46
Dismantling steel cylinder R.C. pipes including excavation and refilling trenches
after taking out the pipes manually/ by machanical maeans breaking lead caulked
joints, melting of lead and making into blocks including stacking of pipes, lead at
site within 50 metres lead as per direction of Engineer-in-charge
82273 1-15-46-1
Up to 600 mm diameter
210.900
metre
82274 1-15-46-2
522.500
metre
1-15-47
82275 1-15-47-1
Up to 150 mm diameter
92.100
metre
82276 1-15-47-2
112.100
metre
82277 1-15-48
Taking out C.I. cover with frame from R.C.C. top slab of manholes of
various sizes including demolishing of R.C.C. work manually/ by
mechanical means and stacking of useful materials near the site and
disposal of unserviceable materials into municipal dumps within 50
metres lead as per direction of Engineer-in-charge.
202.800
each
119.500
each
82278 1-15-49
Taking out C.I. cover with frame from R.C.C. top slab of inspection
chambers of various sizes including demolishing of R.C.C. work
manually/ by mechanical means and stacking of useful materials near
the site and disposal of unserviceable materials into municipal dumps
within skeleton
50 metres- 2014-2015
lead as per -direction
of Engineer-in-charge.
Building Works Based On CPWD
Page
104 of 184
16/05/2014 - 1-15
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82280 1-15-51
82281 1-15-52
1-15-53
1,407.200
each
275.200
each
310.200
each
Dismantling of C.I. sluice valve including stacking of useful materials within a lead
of 50 metres
82282 1-15-53-1
Up to 150 mm diameter
92.300
each
82283 1-15-53-2
377.600
each
82284 1-15-54
226.000
each
1-15-55
Dismantling of cement concrete platform along with curtain walls and base concrete
etc. including stacking of useful materials near the site and disposal of unserviceable
materials within 50 metres lead
82285 1-15-55-1
308.000
each
82286 1-15-55-2
472.500
each
82287 1-15-55-3
668.600
each
82288 1-15-56
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
within 50 metres lead.
15.100
sq.m
82289 1-15-57
20.100
sq.m
82290 1-15-58
2,817.900
cu.m
82291 1-15-59
218.600
cu.m
0.000
cu.m
82292 1-15-60
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
16/07/15 12:42
Rate Card
Chapter Name
Road Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82293 1-16-1
61.700
sq.m
82294 1-16-2
11.200
cu.m
1-16-3
82295 1-16-3-1
1,208.900
cu.m
82296 1-16-3-2
1,474.300
cu.m
82297 1-16-3-3
1,362.600
cu.m
82298 1-16-3-4
1,947.000
cu.m
82299 1-16-3-5
1,947.000
cu.m
82300 1-16-3-6
2,421.900
cu.m
82301 1-16-3-7
2,377.900
cu.m
82302 1-16-3-8
Red bajri
1,129.100
cu.m
82303 1-16-3-9
Good earth.
146.900
cu.m
82304 1-16-3-10
10 Moorum.
1,688.000
cu.m
82305 1-16-4
310.700
cu.m
1-16-5
82306 1-16-5-1
244.900
cu.m
82307 1-16-5-2
244.900
cu.m
4.400
sq.m
1-16-6
82308 1-16-6-1
Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling
complete
including preparation of the surface and rolling.
With road roller/ hand roller.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-16-7
82309 1-16-7-1
1-16-8
Rate
Unit
Brick edging in full brick width and half brick depth including excavation, refilling
and disposal of surplus earth lead upto 50 metres.
With F.P.S. bricks of class designation 75
188.200
metre
Brick edging laid lengthwise with half brick depthincluding excavation, refilling
and disposal of surplus earth lead upto50 metres
82310 1-16-8-1
55.100
metre
82311 1-16-9
10.200
sq.m
82312 1-16-10
221.000
sq.m
82313 1-16-11
Dry stone pitching 22.5 cm thick including supply of stones and preparing
surface complete.
444.700
sq.m
697.400
sq.m
1-16-12
82314 1-16-12-1
Dry brick pitching half brick thick in drains including supply of bricks and preparing
the surface complete
Dry brick pitching half brick thick in drains including supply of bricks and
preparing the surface complete : With F.P.S. bricks of class designation 75
1-16-13
Cutting road and making good the same including supply of extra quantities of
materials i.e. aggregate, moorum screening, red bajri and labour required.
82315 1-16-13-1
bituminous portion
1,575.800
cu.m
82316 1-16-13-2
1,055.400
cu.m
82317 1-16-14
Cutting bajri paths and making good the same including supply of extra
quantities of brick aggregate, moorum and red bajri required.
123.900
sq.m
82318 1-16-15-1
R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 19,291.900
3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm
bar nibs wherever required as per direction of Engineer-in-charge including
fixing (cost of earth works in excavation, concrete works in foundation to be
paid separately).
cu.m
82319 1-16-15-2
82320 1-16-16
Supplying and fixing turn buckles and straining bolts for barbed wire
fencing.
1-16-15
Supplying at site
59.800 kilogram
147.400
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82321 1-16-17
11.500
metre
82322 1-16-18
15.800
metre
82323 1-16-19
Supplying at site Angle iron post & strut of required size including bottom
to be split and bent at right angle in opposite direction for 10 cm length
and drilling holes upto 10 mm dia. etc. complete.
72.200 kilogram
82324 1-16-20
Welded steel wire fabric fencing with posts of specified material and of
standard design placed and embedded in cement concrete blocks
45x45x60cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone
aggregate 40mm nominal size) every 15th post, last but one end post
and corner post shall be strutted on both sides and end post on one side
only and struts embedded in cement concrete blocks 70x45x50cm of the
same mix, provided with welded steel wire fabric fixed between the posts
fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs
with G.I. binding wire (cost of posts, welded steel wire fabric, painting,
earth work in excavation and concrete to be paid for separately) :
22.200
sq.m
82325 1-16-21
4.500
cm
82326 1-16-22
Providing and fixing 15x15x90cm boundary stone of hard stone with top
30 cm chisel dressed on all four sides and on top (cost of excavation,
refilling and concrete etc. to be paid for separately).
118.200
each
82327 1-16-23
Providing and fixing 15cm dia at top 20cm at bottom and 90cm high
precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand :
3 graded stone aggregate 20mm nominal size) boundary stone as per
standard design including finishing smooth with cement mortar 1:3 (1
cement : 3 fine sand) (cost of excavation, refilling and concreting to be
paid for separately).
517.000
each
1-16-24
Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement: 1.5
coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as per
standard design including finishing smooth in 1:3 cement mortar (1 cement:3 fine
Building Works Based On CPWD
skeleton
- 2014-2015
- of earth
Pagework,
109 of
184 in foundation, painting and
sand) but
excluding
the cost
concrete
16/05/2014 - 1-16
lettering etc. which shall be paid for separately.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
standard design including finishing smooth in 1:3 cement mortar (1 cement:3 fine
sand) but excluding the cost of earth work, concrete in foundation, painting and
lettering etc. which shall be paid for separately.
82328 1-16-24-1
35x111x25 cm size.
1,982.400
each
82329 1-16-24-2
50x152.5x25 cm size.
3,153.000
each
82330 1-16-24-3
35x93.5x18 cm size.
1,333.500
each
82331 1-16-25
206.000
sq.m
82332 1-16-26
Surface dressing on new surface in two coats with bitumen of grade A90/S-90 of approved quality using 1.8kg.of bitumen per sqm with 1.5cum
of stone chippings 13.2mm nominal size per 100 sqm of road surface for
first coat and 1.1kg. of bitumen per sqm. with 1.00 cu. metre of stone
chippings 11.2mm nominal size per 100 sqm. of road surface for second
coat including consolidation of each coat separately with road roller of 6
to 8 tonne capacity etc. complete.
280.500
sq.m
82333 1-16-27
Surface dressing on old surface with hot bitumen of grade A-90/ S-90 of
approved quality using 1.95 kg of bitumen per sqm. with 1.50 cum of
stone chippings 11.2 mm nominal size per 100 sqm of road surface
including consolidation with road roller of 6 to 8 tonne capacity, etc.
complete.
160.200
sq.m
99.200
sq.m
1-16-29
82334 1-16-29-1
1-16-30
Surface dressing one coat on old surface with bitumen of specified grade at the
rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm
nominal size per 100 sqm. of road surface including consolidation with road
roller of 6 to 8 tonne capacity etc. complete :
Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming to
IS : 8887).
Providing and applying tack coat using hot straight run bitumen of grade 80/ 100
including heating the bitumen, spraying the bitumen with mechanically operated
spray unit fitted on bitumen boiler, cleaning and preparing the existing road
surface as per specifications
82335 1-16-30-1
39.400
sq.m
82336 1-16-30-2
28.500
sq.m
0.000
sq.m
1-16-31
Providing and applying tack coat using bitumen emulsion complying to IS 8887,
using emulsion pressure distributer including preparing the surface & cleaning with
mechanically broom.
1-16-31-1
82337 1-16-31-1-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82338 1-16-31-1-2
1-16-31-2
Rate
Unit
0.000
sq.m
82339 1-16-31-2-1
0.000
sq.m
82340 1-16-31-2-2
0.000
sq.m
1-16-32
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of
13.2 mm size and 11.2 mm size respectively per 100 sqm. and 52 kg. and 56 kg. of
hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively
including a tack coat with hot straight run bitumen including consolidation with
road roller of 6 to 9 tonne capacity etc. complete: (tack coat to be paid for
separately).
82341 1-16-32-1
With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70
grams per kg of asphalt
159.000
sq.m
82342 1-16-32-2
214.200
sq.m
82343 1-16-32-3
159.200
sq.m
1-16-33
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings
of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of
hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively
including a tack coat with hot straight run bitumen including consolidation with
road roller of 6 to 9 tonne capacity etc. complete, (tack coat to be paid for
separately):
82344 1-16-33-1
With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70
grams per kg of asphalt.
0.000
sq.m
82345 1-16-33-2
0.000
sq.m
82346 1-16-33-3
0.000
sq.m
82347 1-16-34
106.900
sq.m
82348 1-16-35
198.300
sq.m
1-16-37
Providing and laying bitumen mastic wearing course (as per specifications) with
industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic
cooker and laid to required level and slope including providing antiskid surface
with bitumen precoated fine grained hard stone chipping of approved size at the
rate of 0.005 cum per 10 sqm and at approximate spacing of 10cm centre to centre in
both directions, pressed into surface protruding 1mm to 4mm over mastic surface,
including cleaning the surface, removal of debris etc. all complete. (Considering
bitumen using 10.2% as per MORTH specification.)
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82349 1-16-37-1
25mm thick.
154.700
sq.m
82350 1-16-37-2
40 mm thick
154.700
sq.m
443.400
sq.m
27.000
sq.m
0.000
sq.m
1-16-38
2.5 cm thick bitumastic sheet with hot bitumen of approved quality using stone
chippings (60% 12.5 mm nominal size and 40% 10 mm nominal size) @ 1.65 cum
per 100 sqm and coarse sand at 1.65 cum per 100 sqm of road surface and with
bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum, of sand over a tack
coat with hot straight run bitumen including consolidation with road roller of 8 to 10
tonne etc. complete, (tack coat to be paid separately):
82351 1-16-38-1
With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70
grams per kg of asphalt.
82352 1-16-38-2
82353 1-16-38-3
1-16-39
4 cm thick bitumastic sheet with hot bitumen of approved quality using stone
chippings (60% 12.5mm nominal size and 40% 10mm nominal size) @ 2.60cum per
100 sqm and coarse sand at 2.60cum per 100 sqm of road surface and with bitumen
@ 56 kg/cum, of stone chippings and at 128 kg/cum of sand over a tack coat withhot
straight run bitumen including consolidation with road roller of 8 to 10 tonne etc.
complete, (tack coat to be paid separately):
82354 1-16-39-1
With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70
grams per kg of asphalt.
0.000
sq.m
82355 1-16-39-2
0.000
sq.m
82356 1-16-39-3
0.000
sq.m
82357 1-16-40
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and
retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade
80 /100
bitumen per cum of fine aggregate and 0.60cum of fine aggregate per 100 sqm of
road surface including rolling and finishing withroad roller all complete.
39.500
sq.m
82358 1-16-41
Providing and laying seal coat over prepared surface of road with bitumen heated
in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade
80/100 and blinding surface with 0.90cum of stone aggregate of 6.7 mm size
(Passing
11.2mm sieve and retained on 2.36mm sieve) per 100 sqm of road surface including
rolling and finishing with power road roller all complete.
4,578.300
sq.m
82359 1-16-42
6,220.900
cu.m
82360 1-16-44
Extra for providing and mixing hardening campound of approved quality as per
manufacturers specification in cement concrete.
0.000
litre
82361 1-16-45
457.700
sq.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-16-46
82362 1-16-46-1
1-16-47
Rate
Unit
Providing and laying in position bitumen hot sealing compound for expansion
joints etc.
Using grade A sealing compound.
17,166.800
cu.m
Painting runway/taxi track/apron marking with adequate no. of coat to give uniform
finish with road marking paint of superior make as approved by the
Engineer-incharge including cleaning the surface of all dirt, scales, oil, grease and
other foreign material etc and lining out complete.
82363 1-16-47-1
89.500
sq.m
82364 1-16-47-2
56.000
sq.m
105.400
sq.m
68.400
sq.m
2,007.000
Nos.
555.800
Nos.
551.900
cu.m
0.000
cu.m
1-16-48
Painting road surface marking with adequate no. of coats to give uniform finish
with ready mixed road marking paint conforming to IS : 164, on bituminous surface
in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease
and foreign material etc. complete.
82365 1-16-48-1
82366 1-16-48-2
82367 1-16-49
Making bell mouth opening/ entrance of size 100x50x50cm for drainage pipe under
footpath including providing cement concrete 1:3:6 (1 cement: 3 coarse sand : 6
graded stone aggregate 20mm nominal size) for shape of bell mouth including
plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering
with cement mortar 1:3 (1 cement: 3 fine sand) of 6 mm thickness on exposed
surface of the slab & bell mouth including centring, shuttering & neat cement
punning inside the bell mouth etc. all complete.
82368 1-16-50
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall
be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene)
or ABS having electronically welded micro- prismatic lens with abrasion resistant
coating as approved by Engineer in charge. The glow stud shall support a load of
13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 +/-5 degrees to base .The reflective panels on both sides with at
least 12 cm of reflective area up each side. The luminance intensity should be as
per the specification and shall be tested as described in ASTM I: 809 as
recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the Road surface
using the adhesive conforming to IS, as per procedure recommended by the
manufacturer complete and as per direction of Engineer-in-charge.
1-16-51
Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash
stabilised soil with a mix of 3% lime, 12% fly ash and 85% local suitable soil by
weight, so as to achieve minimum field C.B.R. of 20 including mixing, rolling with
road roller curing etc. all complete.
82369 1-16-51-1
82370 1-16-52
Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime : 2 fly ash :
3 coapSe sand : 6 graded stone aggregate 20 mm nominal size) including finishing
with 10mm thick cement mortar 1:3 (1 cement: 3 coarse sand) in foot paths
including
Building Works Based On CPWD
skeleton
- 2014-2015
Page
113laying
of 184
preparation
of sub
grade with- a hand
rammer,
10 mm thick leveling course of
16/05/2014 - 1-16
fine sand (jamuna sand) and filling the joints with fine sand.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
including
preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of
fine sand (jamuna sand) and filling the joints with fine sand.
82371 1-16-53
Providing and fixing concertina coil fencing with required dia 600 mm upto 3m
height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and
with 9 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal
including necessary bolts or G.I. barbed wire tied to angle iron all complete as per
direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core
(2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm. with tape (0.52 mm
thick) of Supreme make or equivalent and weight 43.478gm/ metre (cost of M.S.
angle, C.C. blocks shall be paid separately)
1-16-54
Providing and laying Dense Graded Bituminous macadam using crushed stone
aggregate of stone aggregate grading, premixed with bitumen binder and filler,
transporting the hot mix to work site by tippers, laying with paver finisher equiped
with electronic sensor to the required grade, level and aligment and rolling with
smooth wheeled, vibratory and tendem rollers as per specification to achieve the
desired compaction and density, complete as per specifications and directions of
Engineers-in-charge.
270.700
metre
82372 1-16-54-1
0.000
cu.m
82373 1-16-54-2
0.000
cu.m
1-16-55
82374 1-16-55-1
3,349.300
cu.m
82375 1-16-55-2
0.000
cu.m
3,102.100
sq.m
1-16-56
82376 1-16-56-1
Providing and laying semi- dense Bituminous concrete using crushed stone
aggregate of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site by tippers, laying with paver finisher equiped
with electronic sensor to the required grade, level and alignment and rolling with
smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and
density as per specification, complete and as per directions of Engineer-in charge.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
1-16-57
0.000
sq.m
82378 1-16-57-1
3,102.100
cu.m
82379 1-16-57-2
0.000
cu.m
82380 1-16-57-3
0.000
cu.m
82381 1-16-57-4
0.000
cu.m
82382 1-16-57-5
0.000
cu.m
82383 1-16-57-6
0.000
cu.m
82384 1-16-57-7
0.000
cu.m
82385 1-16-57-8
0.000
cu.m
1-16-58
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
sensing device to the required level and grade and rolling with road rollers, as per
MORTH specifications, to achieve the desired density and compaction but
excluding cost of primer/ tack coat.
82386 1-16-58-1
3,102.100
cu.m
82387 1-16-59-1
Mandatory/ Regulatory sign boards of 900mm dia- metre withpart as length of 22,918.500
3750mm.
Nos.
82388 1-16-59-2
Cautionary /warning sign boards of equilateral triangular shape having each side of 22,918.500
900mm with support length of 3650mm.
Nos.
1-16-59
1-16-60
Manufacturing supplying and fixing retro reflective overhead signage boards made
up of 2mm thick aluminium sheet face to be fully covered with high intensity and
encapsulated lens type heat activated retro reflective sheeting conforming to type III of ASTM-D-4956-01 as approved by Engineer-in-charge letters, borders etc. as
per IRC : 67-2001 in silver white with blue colour back ground and with high
intensity grade, pasted on substrate by pressure sensitive adhesive backing which
shall be activated by applying pressure conforming to class II of ASTM-D-4956-01
and fixing the same to the plate of structural frame work by means of suitable sized
aluminium
alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as
well as in two vertical rows alongwith theft resistant measures including the cost of
painting with twoor more coats of epoxy paint in grey colour on the back side of
aluminium sheet including appropriate priming coat. The rate includes the cost of
rounding off the corners, lowering down the structural frame work from the gantry,
fixing and erecting the same in position all complete as per drawings, specification
and direction of the engineer-in-charge. (Structural frame work including M.S. plate
to be provided separately. Rectangular area of the sheet only shall be measured for
payment).
Building Works Based On CPWD skeleton - 2014-2015 Page 116 of 184
16/05/2014 - 1-16
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
payment).
82389 1-16-60-1
6,366.200
sq.m
82390 1-16-61
Providing Retro-reflective regulatory sign board of size 900mm dia meter made out
of 2mm thick aluminium sheet, face to be fully covered with high intensity
encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge.
Letter , symbols, borders etc. will be as per IRC - 67 with required colour scheme on
the boards and with the high intensity grade A. The aluminium sheet to be riveted
to M.S. frame of angle iron of stze 40x40x4mm The boards will be fixed to 1 No.
50x50mm square post made of M.S. angle 50x50x4m, 4m long welded to the frame
with adequate anti-theft arrangement .Sheet work to be painted with two or more
coats of synthetic enamel paint over an under coat (primer) and back side of
aluminium sheet to be painted with two or more coats of epoxy paint including
appropriate priming coat complete in all respects as per direction of
Engineer-incharge.
9,620.800
sq.m
82391 1-16-62
533.500
sq.m
82392 1-16-63
Providing and laying and making kerb channel 30cm wide and 50mm thick of
cement
concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal
size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and
consolidated and grouted with fine sand including finishing the top smooth etc.
complete and as per direction of Engineer-in-charge.
489.000
sq.m
82393 1-16-64
Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm
thick nominal size including spreading, well ramming, consolidating and grouting
with jamuna sand including finishing smooth etc. complete as per direction of
Engineer-in-charge.
239.200
sq.m
82394 1-16-65
Providing and fixing post delineators (made of ABS body fitted with 2 nose 100mm
dia ) reflective and reflectors are mounted on MS pipe of 65mm dia dully powder
coated anti-rust steel to be installed as per direction of Engineer-in-charge.
727.900
Nos.
23.400
each
565.000
sq.m
1-16-66
82395 1-16-66-1
82396 1-16-67
Excavating holes upto 0.10 cum including getting out the excavated soil, then
returning the soil as deported in layers not exceeding 20cm in depth including
consolidating and deposited layer by ramming watering etc. Disposing of surplus
excavated soil as directed with in a lead of 50m and lift upto 1.5 m.
All kind of soil.
Providing and fixing at or near ground level factory made RCC pavement slab of
M-30 grade of size 450x450x50mm (HPL or equivalent ) including reinforcement
with 6mm dia M.S. bars 4 nose on each side including setting in position in footpath
to the required
and line- overPage
a bed 117
of 20mm
average thick cement mortar 1:3
Building Works Based On CPWD
skeleton -level
2014-2015
of 184
(1 cement : 3 coarse sand ) having thickness not more than 5mm except on curve
16/05/2014 - 1-16
including filling of joints with same cement mortar and making grooves etc.
complete as per direction of Engineer-in-charge.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
with 6mm dia M.S. bars 4 nose on each side including setting in position in footpath
to the required level and line over a bed of 20mm average thick cement mortar 1:3
(1 cement : 3 coarse sand ) having thickness not more than 5mm except on curve
including filling of joints with same cement mortar and making grooves etc.
complete as per direction of Engineer-in-charge.
82397 1-16-68
Providing and laying 60mm thick factory made cement concrete interlocking paver
block of M -30 grade made by block making machine with strong vibratory
compaction and of approved size and design/ shape laid in required colour and
pattern over and including 50mm thick compacted bed of course sand, filling the
joints with coarse sand etc. all complete as per the direction of Engineer-incharge.
849.700
sq.m
82398 1-16-69
Providing and laying at or near ground level factory made kerb stone of M-25
grade cement in position to the required line, level and curvature jointed with
cement mortar 1:3(1 cement: 3 coarse sand ) including making joints with or
without grooves (thickness of joints except at sharp curve shall not to more
than 5mm) including making drainage opening wherever required complete etc.
as per direction of Engineer-in-charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be approved by Engineerincharge).
7,016.900
cu.m
1-16-70
Providing and fixing G.I. chain link fabric fencing of required width in mesh size
50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers
as required complete as per the direction of Engineer-in-charge.
82399 1-16-70-1
541.400
sq.m
82400 1-16-70-2
Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia. not less than 5mm
in required colour and shade.
574.700
sq.m
82401 1-16-71
Providing and fixing G.I. chain link fabric fencing of required width in mesh size
25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia.
wire or nuts, bolts and washers as required complete as per the direction of
Engineer-in-charge.
485.400
sq.m
82402 1-16-72
Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.
979.600
cu.m
82403 1-16-73
Dry stone pitching 22.5cm thick laid in courses and required profile with hammer
dressed stones having no side less than 15 cm, with minimum depth of 20cm
including preparing the bedding surface etc. all complete. (Payment for Stone to
be made separately)
272.900
sq.m
1-16-74
82404 1-16-74-1
Moorum
131.700
sq.m
82405 1-16-74-2
188.600
sq.m
82406 1-16-74-3
102.400
sq.m
9,035.300
cu.m
82407 1-16-75
Providing and laying C.C. pavement of mix M25 with ready mixed concrete from
batching plant. The ready mixed concrete shall be laid and finished with screed
board vibrator , vacuum dewatering process and finally finished by floating,
brooming with wire brush etc. complete as per specifications and directions of
Building Works Based On CPWD
skeleton - 2014-2015
- shuttering
Page 118
184
Engineer-in-charge.
(The panel
workof
shall
be paid for separately ).
16/05/2014 - 1-16
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
brooming with wire brush etc. complete as per specifications and directions of
Engineer-in-charge. (The panel shuttering work shall be paid for separately ).
82408 1-16-76
Deduct for using of M 20 grade concrete instead of M-25 grade concrete in C.C.
pavement.
82409 1-16-77
Scarifiying the existing bituminous road surface to depth of 50mm and disposal of
scarified material withyin all lifts and lead upto 1000 metre (by mechanincal
means).
1-16-28
82410 1-16-28-1
1-16-36
509.500
cu.m
5.400
sq.m
0.000
sq.m
Surface dressing one coat on new surface with bitumen of specified grade at
a rate of 1.95 kg/sqm. of surface area with 1.5 cum. of stone chippings 13.2
mm nominal size per 100 sqm. of road surface including consolidation with road
roller of 6 to 8 tonne capacity , etc. complete :
Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming to
IS : 8887).
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of
quality, size and grading as specified, with bitumen of suitable penetration grade
including required key aggregate as specified, spreading coarse aggregate with the
help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen
by a pressure distributor and then spreading key aggregate with help of aggregate
spreader complete including consolidation with road roller of minimum 8 to 10
tonne capacity to achieve specified values of compaction and surface accuracy :
82411 1-16-36-1
0.000
sq.m
82412 1-16-36-2
For 75 mm compacted thickness in two layers using stone aggregate of size 63-41
mm graded @ 0.90 cum per sqm key aggregate of size 20.0 mm graded @ 0.18 cum
per sqm. With paving asphalt grade VG - 10 @ 68 kg/10sqm.
0.000
sq.m
1-16-43
Providing and laying design mix cement concrete of M-30 grade, in roads/taxi
trucks/runways, using cement content as per design mix, using coarse sands and
graded stone aggregate of 40 mm nominal size in appropriate proportions as per
approved & specified design criteria, providing dowel bars with sleeve/tie bars
wherever required, laying at sote, spreading and compacting, mechanically by using
needle and surface vibrators, levelling to required slope/camber, finishing with
required texture, including steel form work with studry M.S. channel sections,
curing, making provision for contraction/ expansion , construction & longitudinal
joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling
joints with approved joint filler and sealants, complete all as per direction of
Engineer-in-charge (Item of joint fillers, sealants dowel bars with sleeve/tie bars to
be paid separately)
NOTE :- cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement
used as per design mix is payable/ recoverable separately.
82413 1-16-43-1
0.000
cu.m
82414 1-16-43-2
0.000
cu.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-16-78
Rate
Unit
82415 1-16-78-1
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR
Value-30.
0.000
cu.m
82416 1-16-78-2
With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR
Value-25.
0.000
cu.m
82417 1-16-78-3
With material conforming to Grade-III (size range 26.5 mm to 0.075 mm) having
CBR Value-20.
0.000
cu.m
82418 1-16-79
Providing, laying, spreading and compacting graded stone aggregate (size range 53
mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing
the material by tipper to site, for all leads & lifts, laying in uniform layers with
mechanical paver finisher in sub-base/base course on well prepared surface and
compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired
density, complete as per specifications and directions of Engineer-in-charge.
0.000
cu.m
82419 1-16-80
Construction of dry lean cement concrete sub base over a prepared sub-grade with
coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation
after blending to be as per specifications, cement content not to be less than 150
kg/cum, optimum moisture content to be determined during trial length construction,
concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching paint,
transported to site, for all leads & lifts, laid with a mechanical paver, compacting
with 8-10 tonne vibratory roller, finishing and curing etc complete as per direction
of Engineer-in-charge.
0.000
cu.m
82420 1-16-81
Providing and erecting 2.00 meter high temporary barricading at site as per
drawing/direction of Engineer-in charge which includes writing and painting,
arrangement for traffic diversion such as traffic signals during construction at site
for days and night, glow lamps, reflective signs, marking, flags, caution tape as
directed by the Engineer-in-charge. The barricading provided shall be retained in
position at site continuously i/c shifting of barricading from one location to another
location as many times as required during the execution of the entire work till its
completion. Rate including its maintenance for damages, painting, all incidentals,
labour materials, equipments and works required to execute the job. The barricading
shall not be removed without prior approval of Engineer-in-charge. (Note :- One
time payment shall be made for providing barricading from start of work till
completion of work i/c shifting. The barricading provided shall remain to be the
property of the contractor on completion of the work).
0.000
metre
82421 1-16-82
Taking out existing kerb stones of all types from footpath/ central verge, including
removal of mortar etc., disposal of unserviceable material to the dumping ground for
which payment shall be made separately and stacking of serviceable material within
50 meter lead as per direction of Engineer-in-charge.
0.000
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82422 1-16-83
0.000
sq.m
82423 1-16-84
laying old cement concrete interlocking paver blocks of any design/shape laid in
required line, level, curvature, colour and pattern over and including 50 mm thick
compacted bed of coarse sand, filling the joints with fine sand etc. all complete as
per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by
the department free of cost).
0.000
sq.m
82424 1-16-85
Laying at or near ground level old kerb stones of all types in position to the required
line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand)
including making joints with or without grooves (thickness of joints, except at sharp
curve, shall not be more than 5mm) including making drainage opening wherever
required etc. complete as per direction of Engineer-in-charge. (Length of finished
kerb edging shall be measured for payment). (Old kerb stones shall be supplied by
the department free of cost)
0.000
metre
Specification:
16/07/15 12:42
Rate Card
Chapter Name
Sanitary Installation
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-17-1
Rate
Unit
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with
100mm
82425 1-17-1-1
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type
foot rests.
4,966.000
each
82426 1-17-1-2
Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with
flush
pipe and integrated type foot rests.
2,913.100
each
1-17-2
Providing and fixing white vitreous china pedestal type water closet (European type
82427 1-17-2-1
W.C. pan with ISI marked white solid plastic seat and lid
7,030.700
each
82428 1-17-2-2
W.C. pan with ISI marked black solid plastic seat and lid
7,001.400
each
1-17-3
Providing and fixing white vitreous china pedestal type water closet (European type)
82429 1-17-3-1
W.C. pan with ISI marked white solid plastic seat and lid.
8,589.200
each
82430 1-17-3-2
W.C. pan with ISI marked black solid plastic seat and lid.
8,559.800
each
1-17-4
Providing and fixing white vitreous china flat back or wall corner type lipped front
82431 1-17-4-1
One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
3,674.500
each
82432 1-17-4-2
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.
6,049.600
each
82433 1-17-4-3
Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern.
8,586.400
each
82434 1-17-4-4
Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern.
11,690.200
each
6,427.400
each
1-17-5
Providing and fixing white vitreous china flat back half stall urinal of size
82435 1-17-5-1
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
82436 1-17-5-2
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern.
10,071.300
each
82437 1-17-5-3
Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern.
13,553.000
each
82438 1-17-5-4
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.
10,792.900
each
1-17-6
Providing and fixing one piece construction white vitreous china squatting plate
82439 1-17-6-1
4,443.900
each
82440 1-17-6-2
Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern.
6,854.700
each
82441 1-17-6-3
Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern.
9,248.900
each
82442 1-17-6-4
Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern.
11,158.500
each
4,286.500
each
1-17-7
82443 1-17-7-1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass
pillar taps.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82444 1-17-7-2
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass
pillar tap.
3,526.200
each
82445 1-17-7-3
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass
pillar taps.
3,946.300
each
82446 1-17-7-4
White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm
C.P.
brass pillar tap.
3,186.000
each
82447 1-17-7-5
White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm
C.P. brass pillar tap.
7,409.200
each
82448 1-17-7-6
White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm
C.P. brass pillar tap.
4,417.800
each
82449 1-17-7-7
White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm
C.P.
brass pillar tap.
2,945.500
each
82450 1-17-7-8
White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 13,800.500
L5
mm C.P. brass pillar taps with elbow operated levers.
each
82451 1-17-7-9
White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15
mm C.P. brass pillar taps with elbow operated levers ISI marked.
12,952.200
each
82452 1-17-7-10
6,371.000
each
82453 1-17-7-11
5,250.700
each
82454 1-17-8
Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings.
1,920.700
each
2,774.800
each
1-17-9
82455 1-17-9-1
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber
White glazed fire clay kitchen sink of size 600x450x250 mm.
1-17-10
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983
1-17-10-1
82456 1-17-10-1-1
9,742.600
each
82457 1-17-10-1-2
7,982.900
each
82458 1-17-10-1-3
8,569.500
each
82459 1-17-10-1-4
7,842.100
each
6,263.500
each
1-17-10-2
82460 1-17-10-2-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82461 1-17-10-2-2
6,146.200
each
82462 1-17-10-2-3
4,797.100
each
1-17-11
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.
82463 1-17-11-1
Size 450x300x150mm
3,367.200
each
82464 1-17-11-2
Size 600x450x200mm
4,071.100
each
1-17-13
Providing and fixing white vitreous china water closet squatting pan (Indian type)
82465 1-17-13-1
1,933.400
each
82466 1-17-13-2
2,519.900
each
807.100
each
4,455.600
each
-1,789.000
each
1-17-14
Extra for using coloured W.C. pan instead of white W.C. pan
82467 1-17-14-1
82468 1-17-15
Providing and fixing white vitreous china pedestal type (European type/
wash down type) water closet pan.
82469 1-17-16
Extra for using coloured pedestal type W.C pan (European type) with
low level cistern of same colour instead of white vitreous china W.C pan
and cistern.
1-17-17
Providing and fixing a pair of white vitreous china foot rests of standard pattern
82470 1-17-17-1
250x130x30 mm
306.300
each
82471 1-17-17-2
250x125x25 mm
282.900
each
1-17-18
Providing and fixing P.V.C. low level flushing cistern with manually controlled
device
82472 1-17-18-1
10 litre capacity-White
1,343.000
each
82473 1-17-18-2
10 litre capacity-coloured
1,112.100
each
1-17-19
Providing and fixing controlled flush, low level cistern made of vitreous china with
82474 1-17-19-1
2,835.500
each
82475 1-17-19-2
4,158.700
each
1-17-20
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
82476 1-17-20-1
525.300
each
82477 1-17-20-2
495.900
each
82478 1-17-20-3
Coloured (other than black & white) solid plastic seat with lid.
0.000
each
82479 1-17-21
Extra for providing coloured other than black solid P.V.C. plastic seat
and cover in European type W.C. pan, instead of white plastic seat and
cover.
1,114.500
each
Providing and fixing G.I. inlet connection for flush pipe connecting with
W.C. pan.
Building Works Based On CPWD skeleton - 2014-2015 Page 124 of 184
16/05/2014 - 1-17
103.000
each
82480 1-17-22
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
W.C. pan.
82481 1-17-23
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350mm and 340x410x265mm
sizes respectively.
1,176.200
each
82482 1-17-24
Providing and fixing white vitreous china squatting plate urinal with
integral rim longitudinal flush pipe.
2,038.300
each
1-17-25
Providing and fixing white vitreous china wash basin including making all
82483 1-17-25-1
1,815.500
each
82484 1-17-25-2
1,475.300
each
82485 1-17-25-3
5,698.600
each
82486 1-17-25-4
2,707.100
each
82487 1-17-25-5
1,685.900
each
82488 1-17-25-6
11,153.500
each
747.400
each
1-17-26
82489 1-17-26-1
1-17-27
Providing and fixing kitchen sink including making all connections excluding cost
White glazed fire clay sink of size 600x450x250mm.
Providing and fixing white vitreous china laboratory sink including making all
82490 1-17-27-1
1,792.100
each
82491 1-17-27-2
Size 600x450x200 mm
2,213.800
each
1-17-28
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
1-17-28-1
82492 1-17-28-1-1
32mmdia
110.800
Nos.
82493 1-17-28-1-2
40mmdia
128.400
Nos.
1-17-28-2
Flexible pipe
82494 1-17-28-2-1
32mm dia
128.400
Nos.
82495 1-17-28-2-2
40 mmdia
134.300
Nos.
82496 1-17-29
Providing and fixing 100 mm sand cast Iron grating for gully trap.
29.400
each
82497 1-17-30
36.500
Nos.
82498 1-17-31
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of
approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
537.300
Nos.
1-17-32
Providing and fixing mirror of superior glass (of approved quality) and of required
shape and size with plastic moulded frame of approved make and shades with 6 mm
Building Works Based On CPWD
skeleton
2014-2015 Page 125 of 184
thick hard
board- backing:
16/05/2014 - 1-17
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
shape and size with plastic moulded frame of approved make and shades with 6 mm
thick hard board backing:
82499 1-17-32-1
1,307.200
each
82500 1-17-32-2
1,471.700
each
82501 1-17-32-4
1,587.300
each
82502 1-17-32-3
1,527.500
each
82503 1-17-33
Providing and fixing 600x120x5mm glass shelf with edges round of supported on
anodised aluminium angle frame with C.P. brass brackets and guard rail complete
fixed with 40 mm long screws, rawl plugs etc., complete.
4,106.900
Nos.
1-17-34
82504 1-17-34-1
C.P. brass
1,014.900
Nos.
82505 1-17-34-2
Vitreous china
1,023.300
Nos.
1-17-35
1-17-35-1
100 mm dia.
82506 1-17-35-1-1
834.500
metre
82507 1-17-35-1-2
959.400
metre
1-17-35-2
75 mm diameter :
82508 1-17-35-2-1
712.000
metre
82509 1-17-35-2-2
793.400
metre
1-17-36
Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2
82510 1-17-36-1
59.900
each
82511 1-17-36-2
70.600
each
1-17-37
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast
82512 1-17-37-1
148.700
each
82513 1-17-37-2
140.200
each
1-17-38
Providing and fixing bend of required degree with access door, insertion rubber
1-17-38-1
100 mm
82514 1-17-38-1-1
337.800
Nos.
82515 1-17-38-1-2
44.600
Nos.
1-17-38-2
75 mm dia
82516 1-17-38-2-1
297.200
Nos.
82517 1-17-38-2-2
21.500
Nos.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-17-39
1-17-39-1
100 mm
Rate
Unit
82518 1-17-39-1-1
437.600
Nos.
82519 1-17-39-1-2
337.800
Nos.
1-17-39-2
75 mm
82520 1-17-39-2-1
220.900
Nos.
82521 1-17-39-2-2
250.300
Nos.
1-17-40
1-17-40-1
100 mm dia
82522 1-17-40-1-1
320.200
Nos.
82523 1-17-40-1-2
374.200
Nos.
1-17-40-2
75 mm
82524 1-17-40-2-1
279.600
Nos.
82525 1-17-40-2-2
314.800
Nos.
1-17-41
Providing and fixing double equal junction of required degree with access door,
1-17-41-1
100x100x100x100mm
82526 1-17-41-1-1
1,290.600
each
82527 1-17-41-1-2
748.300
each
1-17-41-2
75x75x75x75 mm
82528 1-17-41-2-1
563.700
each
82529 1-17-41-2-2
584.800
Nos.
1-17-42
1-17-42-1
100x100x100x100 mm
82530 1-17-42-1-1
1,200.100
each
82531 1-17-42-1-2
580.700
each
1-17-42-2
75x75x75x75 mm
82532 1-17-42-2-1
21.500
each
82533 1-17-42-2-2
563.500
each
27.000
each
1-17-43
Providing and fixing single equal plain junction of required degree with access
1-17-43-1
100x100x100 mm
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82535 1-17-43-1-2
1-17-43-2
Rate
Unit
27.000
each
75x75x75 mm
82536 1-17-43-2-1
21.500
each
82537 1-17-43-2-2
21.500
each
1-17-44
1-17-44-1
100x100x100 mm
82538 1-17-44-1-1
27.000
each
82539 1-17-44-1-2
27.000
each
1-17-44-2
75x75x75 mm
82540 1-17-44-2-1
21.500
each
82541 1-17-44-2-2
21.500
each
1-17-45
Providing and fixing double unequal junction of required degree with access
1-17-45-1
100x100x75x75 mm
82542 1-17-45-1-1
27.000
each
82543 1-17-45-1-2
27.000
each
1-17-46
1-17-46-1
100x100x75x75 mm
82544 1-17-46-1-1
672.200
each
82545 1-17-46-1-2
965.500
each
1-17-47
Providing and fixing single unequal junction of required degree with access
1-17-47-1
100x100x75 mm
82546 1-17-47-1-1
496.200
each
82547 1-17-47-1-2
777.900
each
1-17-48
1-17-48-1
100x100x75 mm
82548 1-17-48-1-1
461.000
each
82549 1-17-48-1-2
695.600
each
672.200
each
648.700
each
1-17-49
Providing and fixing double equal plain invert branch of required degree:
1-17-49-1
100x100x100x100mm
82550 1-17-49-1-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-17-49-2
Rate
Unit
75x75x75x75 mm
82552 1-17-49-2-1
507.900
each
82553 1-17-49-2-2
525.500
each
1-17-50
Providing and fixing single equal plain invert branch of required degree:
1-17-50-1
100x100x100 mm
82554 1-17-50-1-1
507.900
each
82555 1-17-50-1-2
519.700
each
1-17-50-2
75x75x75 mm
82556 1-17-50-2-1
402.400
each
82557 1-17-50-2-2
405.900
each
1-17-51
1-17-51-1
100x100x75x75 mm
82558 1-17-51-1-1
695.600
each
82559 1-17-51-1-2
877.500
each
1-17-52
Providing and fixing single unequal plain invert branch of required degree :
1-17-52-1
100x100x75 mm
82560 1-17-52-1-1
607.700
each
82561 1-17-52-1-2
666.300
each
1-17-53
Providing and fixing sand cast iron S&S offsets as per IS: 1729
1-17-53-1
76 mm offsets
82562 1-17-53-1-1
277.300
Nos.
82563 1-17-53-1-2
447.400
Nos.
1-17-53-2
114 mm offsets
82564 1-17-53-2-1
373.500
Nos.
82565 1-17-53-2-2
277.300
Nos.
1-17-53-3
152 mm offsets
82566 1-17-53-3-1
455.800
Nos.
82567 1-17-53-3-2
581.300
Nos.
285.500
Nos.
1-17-54
Providing and fixing sand cast iron S&S offsets as per IS: 3989.
1-17-54-1
75 mm offsets
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-17-54-2
Rate
Unit
150 mm offsets
82569 1-17-54-2-1
366.500
Nos.
82570 1-17-54-2-2
489.700
Nos.
1-17-55
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts
1-17-55-1
100mm
82571 1-17-55-1-1
496.400
Nos.
82572 1-17-55-1-2
496.400
each
1-17-55-2
75 mm
82573 1-17-55-2-1
344.300
Nos.
82574 1-17-55-2-2
367.800
Nos.
1-17-56
1-17-56-1
100 mm
82575 1-17-56-1-1
437.600
Nos.
82576 1-17-56-1-2
390.600
Nos.
1-17-56-2
75 mm
82577 1-17-56-2-1
373.500
Nos.
82578 1-17-56-2-2
303.100
Nos.
1-17-57
1-17-57-1
100 mm
82579 1-17-57-1-1
194.700
Nos.
82580 1-17-57-1-2
320.200
Nos.
1-17-57-2
75 mm
82581 1-17-57-2-1
154.100
Nos.
82582 1-17-57-2-2
220.900
Nos.
1-17-58
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron
82583 1-17-58-1
100mm
250.800
each
82584 1-17-58-2
75 mm
210.000
Nos.
82585 1-17-58-3
50 mm
163.100
Nos.
66.800
Nos.
1-17-59
82586 1-17-59-1
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast
100 mm
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82587 1-17-59-2
75 mm
55.500
Nos.
82588 1-17-59-3
50 mm
48.300
Nos.
1-17-60
Providing and fixing trap of self cleansing design with screwed down or hinged
1-17-60-1
82589 1-17-60-1-1
1,069.000
each
82590 1-17-60-1-2
881.300
each
1-17-60-2
82591 1-17-60-2-1
849.400
each
82592 1-17-60-2-2
814.500
each
1-17-61
Cutting chases in brick masonry walls for following diameter sand cast iron
82593 1-17-61-1
100mmdia.
385.400
metre
82594 1-17-61-2
75mmdia
276.200
metre
82595 1-17-61-3
50mmdia.
177.200
metre
82596 1-17-62
Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and
white paint over a coat of zinc chromate yellow primer (of approved quality ) on
the outside surface of the cistern flush pipe, other fittings, etc. complete for new
work.
588.400
Nos.
82597 1-17-63
Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside
and white paint on the outside surface of the cistern, flush pipe, other fittings,
etc. complete including polishing of wooden seat and lid and cleaning of W.C.
pan with acid wherever necessary.
347.100
Nos.
82598 1-17-64
Repainting C.I. cistern with synthetic enamel paint of approved colour brand
and manufacture on the outside surface of cistern flush pipe, other fittings etc.
complete.
159.200
Nos.
1-17-65
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes
82599 1-17-65-1
42.000
metre
82600 1-17-65-2
75 mm diameter pipe
32.000
metre
1-17-66
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent
82601 1-17-66-1
20.200
metre
82602 1-17-66-2
75 mm diameter pipe
15.100
metre
82603 1-17-67
425.000
each
243.600
Nos.
1-17-68
82604 1-17-68-1
Providing and fixing vitreous china dual purpose closet suitable for use as
White vitreous china dual purpose WC pan with white solid plastic seat and lid with
white vitreous china flushing cistern and C.P. flush bend.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-17-69
Rate
Unit
Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved
82605 1-17-69-1
Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not less than
45gms.
108.500
Nos.
82606 1-17-69-2
Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than
60gms.
139.000
Nos.
1-17-70
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
82607 1-17-70-1
Bottle trap 31mm single piece moulded with height of 270mm, effective length
oftail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm
minimum water seal, weighing not less than 260gms
468.600
Nos.
82608 1-17-70-2
Bottle trap 38mm single piece moulded with height of 270mm, effective length of
tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm
minimum water seal, weighing not less than 263gms.
498.000
Nos.
82609 1-17-71
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and
112mm distance from wall of standard shape with bracket of the same materials
with snap fittings of approved quality and colours weighing not less
than 105 gms
215.300
Nos.
82610 1-17-72
Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm
wide with a minimum distances of 37mm from wall face with concealed fittings
arrangement of approved quality and colours weighing not less than 80 gms
202.300
Nos.
1-17-73
Providing and fixing PTMT towel rail complete with brackets fixed to wooden
82611 1-17-73-1
450mm long towel rail with total length of 495mm, 78mm wide and effective height
of 88mm, weighing not less than 170gms.
505.200
Nos.
82612 1-17-73-2
600mm long towel rail with total length of 645mm, width 78mm and effective
height of 88mm, weighing not less than 190gms.
754.100
Nos.
82613 1-17-74
Providing and fixing PTMT shelf 440 mm long, 124 mm widthand 36 mm height
of approved quality and colour, weighing not less than 300gms.
537.900
Nos.
82614 1-17-75
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2"
BSP thread and shapes, weighing not less than 60gms.
219.100
Nos.
156.800
Nos.
1-17-76
82615 1-17-76-1
1-17-77
Providing and fixing PTMT urinal cock of approved quality and colour.
15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female
threads weighing not less than 48gms
Providing and fixing M.S. holder bat clamp of approved design to sand cast
82616 1-17-77-1
Total bracket length 580mm of approved shape and design (for single 100mm dia
pipe).
201.500
Nos.
82617 1-17-77-2
Total bracket length 810mm of approved shape and design (for two 100mm dia
pipes).
246.300
Nos.
82618 1-17-77-3
Total bracket length 1040mm of approved shape and design (for three 100mm dia
pipes).
290.900
Nos.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-17-12
Rate
Unit
Providing and fixing draining board with C.I. brackets including painting of
brackets, cutting and making good the walls wherever required :
82619 1-17-12-1
0.000
each
82620 1-17-78
Providing and fixing white vitreous china extended wall mounting water closet of
size 780x370x690 mm of approved shape including providing & fixing white
viterous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre
(adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts
and gasket etc complete.
0.000
each
82621 1-17-79
Providing and fixing white vitreous china water less urinal of size 600 x 330 x 315
mm having antibacterial / germs free ceramic surface, fixed with cartridge having
debris catcher and hygiene seal.
0.000
each
82622 1-17-80
Providing and fixing white vitreous china battery based infrared sensor operated
urinal of approx. size 610 x 390x 370 mm having pre & post flushing with water
(250 ml & 500 ml consumption), having water inlet from back side. including fixing
to wall with suitable brackets all as per manufacturers specification and direction of
Engineer-in-charge.
0.000
each
Specification:
16/07/15 12:42
Rate Card
Chapter Name
Water Supply
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
1-18-1
1-18-1-1
167.900
metre
1-18-1-2
207.800
metre
1-18-1-3
301.600
metre
1-18-1-4
376.800
metre
1-18-1-5
594.400
metre
1-18-1-6
645.600
metre
1-18-2
82623 1-18-2-1
169.000
metre
82624 1-18-2-2
204.200
metre
82625 1-18-2-3
245.200
metre
82626 1-18-2-4
298.000
metre
1-18-3
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82627 1-18-3-1
158.600
metre
82628 1-18-3-2
231.300
metre
82629 1-18-3-3
282.800
metre
82630 1-18-3-4
349.100
metre
82631 1-18-3-5
557.100
metre
82632 1-18-3-6
608.600
metre
1-18-4
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
7.4 U V stabilized & anti -microbial fusion welded, having thermal stability for hot
& cold water supply including all PP - R plain & brass threaded polypropylene
random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes
testing of joints complete as per direction of Engineer in Charge. (Internal
workexposed
on wall)
82633 1-18-4-1
PN-16 Pipe, 16 mm OD
112.600
metre
82634 1-18-4-2
PN - 16 Pipe, 20 mm OD
147.200
metre
82635 1-18-4-3
PN - 16 Pipe, 25 mm OD
198.100
metre
82636 1-18-4-4
PN - 16 Pipe, 32 mm OD
287.200
metre
82637 1-18-4-5
PN - 16 Pipe, 40 mm OD
412.300
metre
82638 1-18-4-6
PN - 16 Pipe, 50 mm OD
589.000
metre
1-18-5
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot
& cold water supply including all PP-R plain & brass threaded polypropylene
random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the
cost of cutting chases and making good the same including testing of joints
complete as per direction of Engineer in Chajge. (Concealed work including cutting
chases and making good the walls etc.,)
82639 1-18-5-1
PN- 16 Pipe, 16 mm OD
165.500
metre
82640 1-18-5-2
PN - 16 Pipe, 20 mm OD
167.200
metre
82641 1-18-5-3
PN - 16 Pipe, 25 mm OD
226.800
metre
82642 1-18-5-4
PN - 16 Pipe, 32 mm OD
224.100
metre
101.600
metre
1-18-6
82643 1-18-6-1
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot
& cold water supply including all PP-R plain & brass threaded polypropylene
random fittings i/c trenching .refilling & testing of joints complete as per direction
of Engineer in Charge. (External work)
PN-16 Pipe, 16 mm OD
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82644 1-18-6-2
131.100
metre
82645 1-18-6-3
181.500
metre
82646 1-18-6-4
261.000
metre
82647 1-18-6-5
370.000
metre
82648 1-18-6-6
546.800
metre
82649 1-18-6-7
826.200
metre
82650 1-18-6-8
1,101.600
metre
82651 1-18-6-9
1,664.100
metre
82652 1-18-6-10
1,861.500
metre
82653 1-18-6-11
3,829.600
metre
1-18-7
82654 1-18-7-1
110.000
metre
82655 1-18-7-2
127.600
metre
82656 1-18-7-3
179.900
metre
82657 1-18-7-4
269.500
metre
82658 1-18-7-5
371.000
metre
82659 1-18-7-6
540.400
metre
1-18-8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including all CPVC plain & brass threaded
fittings
i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the cost of cutting chases and
making
good the same including testing of joints complete as per direction of Engineer in
Charge. (Concealed work including cutting chases and making good the walls etc.,)
82660 1-18-8-1
122.100
metre
82661 1-18-8-2
188.300
metre
82662 1-18-8-3
169.000
metre
82663 1-18-8-4
307.500
metre
1-18-9
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including all CPVC plain & brass threaded
Building Works Based On CPWD
- 2014-2015
- ofPage
of 184with one step CPVC solvent
fittings,skeleton
this included
jointing
pipes 136
& fittings
16/05/2014 - 1-18
cement,
trenching, refilling & testing of joints complete as per direction of Engineer in
Charge. (External work).
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
stability for hot & cold water supply including all CPVC plain & brass threaded
fittings, this included jointing of pipes & fittings with one step CPVC solvent
cement,
trenching, refilling & testing of joints complete as per direction of Engineer in
Charge. (External work).
82664 1-18-9-1
111.700
metre
82665 1-18-9-2
147.300
metre
82666 1-18-9-3
163.300
metre
82667 1-18-9-4
243.300
metre
82668 1-18-9-5
328.700
metre
82669 1-18-9-6
498.200
metre
82670 1-18-9-7
2,592.700
metre
82671 1-18-9-8
1,975.900
metre
82672 1-18-9-9
2,745.400
metre
82673 1-18-9-10
3,311.700
metre
1-18-10
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including
cutting and making good the walls etc. Iinternal work - Exposed on wall
82674 1-18-10-1
188.700
metre
82675 1-18-10-2
229.800
metre
82676 1-18-10-3
307.400
metre
82677 1-18-10-4
377.100
metre
82678 1-18-10-5
441.500
metre
82679 1-18-10-6
554.300
metre
1-18-11
82680 1-18-11-1
269.400
metre
82681 1-18-11-2
305.300
metre
1-18-12
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
refilling etc. (external work)
82682 1-18-12-1
162.700
metre
82683 1-18-12-2
194.500
metre
82684 1-18-12-3
263.200
metre
82685 1-18-12-4
316.800
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82686 1-18-12-5
360.000
metre
82687 1-18-12-6
442.000
metre
82688 1-18-12-7
472.100
metre
82689 1-18-12-8
741.000
metre
1-18-13
Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete
82690 1-18-13-1
25 to 40 mm nominal bore
341.500
each
82691 1-18-13-2
50 to 80 mm nominal bore
728.200
each
82692 1-18-14
Fixing water meter and stop cock in G.I. pipe line including cutting
and threading the pipe and making long screws etc. complete (cost of
water meter and stop cock to be paid separately).
288.800
each
1-18-15
82693 1-18-15-1
15 mm nominal bore
414.900
each
82694 1-18-15-2
20 mm nominal bore
464.700
each
1-18-16
82695 1-18-16-1
15 mm nominal bore
414.900
each
82696 1-18-16-2
20 mm nominal bore
467.300
each
1-18-17
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end)
82697 1-18-17-1
25 mm nominal bore
432.100
each
82698 1-18-17-2
32 mm nominal bore.
505.300
each
82699 1-18-17-3
40 mm nominal bore
590.100
each
82700 1-18-17-4
50 mm nominal bore
756.900
each
82701 1-18-17-5
65 mm nominal bore
1,299.100
each
82702 1-18-17-6
80 mm nominal bore
1,938.000
each
1-18-18
1-18-18-1
82703 1-18-18-1-1
15 mm nominal bore
289.400
each
82704 1-18-18-1-2
20 mm nominal bore
411.500
each
82705 1-18-18-1-3
25 mm nominal bore
451.400
each
1-18-19
Providing and fixing gun metal non-return valve of approved quality (screwed
end)
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-18-19-1
Rate
Unit
25 mm nominal bore
82706 1-18-19-1-1
Horizontal
414.100
each
82707 1-18-19-1-2
Vertical
414.100
each
1-18-19-2
32 mm nominal bore
82708 1-18-19-2-1
Horizontal
545.700
each
82709 1-18-19-2-2
Vertical
551.600
each
1-18-19-3
40 mm nominal bore
82710 1-18-19-3-1
Horizontal
689.100
each
82711 1-18-19-3-2
Vertical
689.100
each
1-18-19-4
50 mm nominal bore
82712 1-18-19-4-1
Horizontal
997.000
each
82713 1-18-19-4-2
Vertical
997.000
each
1-18-19-5
65 mm nominal bore
82714 1-18-19-5-1
Horizontal
1,785.500
each
82715 1-18-19-5-2
Vertical
1,785.500
each
1-18-19-6
80 mm nominal bore
82716 1-18-19-6-1
Horizontal
2,527.400
each
82717 1-18-19-6-2
Vertical
3,430.700
each
1-18-20
Providing and fixing brass ferrule with C.I. mouth cover including boring and
tapping the main
82718 1-18-20-1
15 mm nominal bore
215.300
each
82719 1-18-20-2
20 mm nominal bore
264.200
each
82720 1-18-20-3
25 mm nominal bore
347.800
each
1-18-21
Providing and fixing uplasticised PVC connection pipe with brass unions
1-18-21-1
30 cm length
82721 1-18-21-1-1
15 mm nominal bore
112.400
Nos.
82722 1-18-21-1-2
20 mm nominal bore
141.700
Nos.
1-18-21-2
45 cm length
82723 1-18-21-2-1
15 mm nominal bore
144.300
Nos.
82724 1-18-21-2-2
20 mm nominal bore
144.300
Nos.
1-18-22
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82725 1-18-22-1
100 mm diameter
72.100
Nos.
82726 1-18-22-2
150 mm diameter
86.500
Nos.
82727 1-18-23
Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding
cost of pipe)
109.200 Quintal
82728 1-18-24
Laying in position S&S or flanged C.I. special such tees, bends collars,tapers and
caps etc. (excluding cost of specials).
211.600 Quintal
1-18-25
Providing and laying S&S C.I. standard specials such as tees, bends, collars,tapers,
caps etc. (Heavy class)
82729 1-18-25-1
3,590.200 Quintal
82730 1-18-25-2
3,864.700 Quintal
1-18-26
Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers, caps etc., suitable for flanged jointing as per IS : 1538
82731 1-18-26-1
6,293.000 Quintal
82732 1-18-26-2
6,928.900 Quintal
1-18-27
Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA)
conforming to IS - 1536
82733 1-18-27-1
1,104.800
metre
82734 1-18-27-2
1,378.600
metre
82735 1-18-27-3
1,646.400
metre
82736 1-18-27-4
2,792.800
metre
82737 1-18-27-5
3,653.600
metre
82738 1-18-27-6
4,916.100
metre
82739 1-18-27-7
5,918.900
metre
82740 1-18-27-8
7,807.000
metre
82741 1-18-27-9
9,455.800
metre
82742 1-18-27-10
10,934.000
metre
82743 1-18-27-11
15,318.800
metre
1-18-28
Providing lead caulked joints to spun iron or C.I. pipes and specials including
testing of joints but excluding the cost of pig lead :
82744 1-18-28-1
216.000
each
82745 1-18-28-2
348.100
each
82746 1-18-28-3
324.200
each
82747 1-18-28-4
430.800
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82748 1-18-28-5
537.500
each
82749 1-18-28-6
646.200
each
82750 1-18-28-7
663.100
each
82751 1-18-28-8
868.600
each
82752 1-18-28-9
973.700
each
82753 1-18-28-10
1,030.500
each
82754 1-18-28-11
1,393.300
each
82755 1-18-29
1-18-30
10,558.000 Quintal
Providing flanged joints to double flanged C.I./ D.I. pipes and specials including
testing of joints :
82756 1-18-30-1
80 mm diameter pipe
123.700
each
82757 1-18-30-2
202.500
each
82758 1-18-30-3
203.700
each
82759 1-18-30-4
243.600
each
82760 1-18-30-5
233.900
each
82761 1-18-30-6
364.600
each
82762 1-18-30-7
374.000
each
82763 1-18-30-8
695.900
each
82764 1-18-30-9
725.200
each
82765 1-18-30-10
897.900
each
82766 1-18-30-11
1,024.300
each
82767 1-18-30-12
377.000
each
1-18-31
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber
insertions etc. (the tail pieces if required will be paid separately):
1-18-31-1
100 mm diameter
82768 1-18-31-1-1
Class I
3,325.900
each
82769 1-18-31-1-2
Class II
3,912.500
each
1-18-31-2
125 mm diameter
82770 1-18-31-2-1
Class I
3,143.800
each
82771 1-18-31-2-2
Class II
4,199.600
each
1-18-31-3
150 mm diameter
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82772 1-18-31-3-1
Class I
4,376.600
each
82773 1-18-31-3-2
Class II
5,227.400
each
1-18-31-4
200 mm diameter
82774 1-18-31-4-1
Class I
9,055.500
each
82775 1-18-31-4-2
Class II
11,122.800
each
1-18-31-5
250 mm diameter
82776 1-18-31-5-1
Class I
13,261.500
each
82777 1-18-31-5-2
Class II
18,577.800
each
1-18-31-6
300 mm diameter
82778 1-18-31-6-1
Class 1
19,444.200
each
82779 1-18-31-6-2
Class II
23,092.600
each
1,470.200
each
12,233.300
each
14,111.000
each
1-18-32
82780 1-18-32-1
1-18-33
82781 1-18-33-1
1-18-34
82782 1-18-34-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-18-35
82783 1-18-35-1
1-18-36
82784 1-18-36-1
1-18-37
82785 1-18-37-1
1-18-38
Rate
Unit
19,287.000
each
7,644.300
each
6,954.500
each
82786 1-18-38-1
15 mm diameter pipe
10.200
metre
82787 1-18-38-2
20 mm diameter pipe
12.100
metre
82788 1-18-38-3
25 mm diameter pipe.
11.800
metre
82789 1-18-38-4
32 mm diameter pipe.
17.600
metre
82790 1-18-38-5
40 mm diameter pipe.
19.600
metre
82791 1-18-38-6
50 mm diameter pipe.
23.800
metre
1-18-39
Repainting G.I. pipes and fittings with synthetic enamel white paint of approved
quality
82792 1-18-39-1
15 mm diameter pipe.
5.100
metre
82793 1-18-39-2
20 mm diameter pipe.
5.900
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82794 1-18-39-3
25 mm diameter pipe
7.600
metre
82795 1-18-39-4
32 mm diameter pipe
9.000
metre
82796 1-18-39-5
40 mm diameter pipe
10.500
metre
82797 1-18-39-6
50 mm diameter pipe
12.400
metre
1-18-40
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality :
82798 1-18-40-1
15 mm diameter pipe
5.400
metre
82799 1-18-40-2
20 mm diameter pipe
6.400
metre
82800 1-18-40-3
25 mm diameter pipe
8.200
metre
82801 1-18-40-4
32 mm diameter pipe
9.800
metre
82802 1-18-40-5
40 mm diameter pipe
11.100
metre
82803 1-18-40-6
50 mm diameter pipe
13.200
metre
82804 1-18-40-7
65 mm diameter pipe
16.300
metre
82805 1-18-40-8
80 mm diameter pipe
18.900
metre
1-18-41
Providing and filling sand grading zone V or coarser grade alround the G.I. pipes in
external work.
82806 1-18-41-1
143.000
metre
82807 1-18-41-2
20 mm diameter pipe
10.700
metre
82808 1-18-41-3
25 mm diameter pipe
11.000
metre
82809 1-18-41-4
32 mm diameter pipe
11.300
metre
82810 1-18-41-5
40 mm diameter pipe
11.400
metre
82811 1-18-41-6
50 mm diameter pipe
11.900
metre
82812 1-18-41-7
65 mm diameter pipe
18.700
metre
82813 1-18-41-8
80 mm diameter pipe
19.300
metre
82814 1-18-41-9
20.400
metre
82815 1-18-41-10
30.500
metre
1-18-42
Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils
except ordinary hard rocks requiring blasting including removing the casing pipe
after the hand pipe/tube well is lowered and tested
82816 1-18-42-1
428.100
metre
82817 1-18-42-2
508.000
metre
82818 1-18-42-3
591.000
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82819 1-18-43
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass
strainer of approved quality.
553.800
metre
82820 1-18-44
Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube
well including cleaning and priming the tube well.
360.400
metre
82821 1-18-45
925.100
metre
1-18-46
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the
pipe and making long screws etc. complete (New work)
82822 1-18-46-1
15 mm nominal bore
185.800
Nos.
82823 1-18-46-2
20 mm nominal bore
253.100
Nos.
82824 1-18-46-3
25 mm nominal bore
300.100
Nos.
82825 1-18-46-4
32 mm nominal
364.600
Nos.
82826 1-18-46-5
40 mm nominal bore
462.000
Nos.
82827 1-18-46-6
603.300
Nos.
82828 1-18-46-7
887.200
Nos.
82829 1-18-46-8
80 mm nominal bore
1,283.800
Nos.
1-18-47
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the
pipe and making long screws including excavation, refilling the earth or cutting of
wall and making good the same complete wherever required :
82830 1-18-47-1
15 mm nominal bore.
363.400
each
82831 1-18-47-2
20 mm nominal bore.
430.700
each
82832 1-18-47-3
25 mm nominal bore.
477.700
each
82833 1-18-47-4
32 mm nominal bore.
542.200
each
82834 1-18-47-5
40 mm nominal bore.
639.600
each
82835 1-18-47-6
50 mm nominal bore.
845.500
each
82836 1-18-47-7
65 mm nominal bore.
1,129.400
each
82837 1-18-47-8
80 mm nominal bore.
1,525.900
each
82838 1-18-48
Providing and placing on terrace (at all floor levels) polyethylene water storage
tank ISI : 12701 marked with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tank
10.500
litre
756.300
Nos.
1-18-49
82839 1-18-49-1
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
15 mm nominal bore
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-18-50
82840 1-18-50-1
1-18-51
82841 1-18-51-1
1-18-52
82842 1-18-52-1
1-18-53
82843 1-18-53-1
1-18-54
Rate
Unit
Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
15mm nominal bore.
983.000
Nos.
1,189.600
Nos.
1,255.300
Nos.
902.400
Nos.
Providing and fixing C.P. brass long body bib cock of approved quality conforming
to IS standards and weighing not less than 690 gms.
15mm nominal bore.
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
15mm nominal bore.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
15 mm nominal bore
Providing and fixing PTMT bib cock of approved quality and colour.
82844 1-18-54-1
182.300
Nos.
82845 1-18-54-2
323.400
Nos.
82846 1-18-54-3
15 mm nominal bore, 165 mm long, weighing not less than 110 grams.
236.600
Nos.
82847 1-18-54-4
15mm nominal bore, 90mm long, weighing not less than 93 grams.
186.200
Nos.
1-18-55
Providing and fixing PTMT stop cock of approved quality and colour.
82848 1-18-55-1
156.800
Nos.
82849 1-18-55-2
20mm nominal bore, 89mm long, weighing not less than 88 grams.
224.500
Nos.
82850 1-18-55-3
Concealed stop cock, 15mm nominal bore, 108mm long, weighing not less than 108
grams.
201.400
Nos.
1-18-56
Providing and fixing PTMT pillar cock of approved quality and colour .
82851 1-18-56-1
15mm nominal bore, 107mm long, weighing not less than 110 grams.
239.500
Nos.
82852 1-18-56-2
15mm nominal bore, 125mm long foam flow, Weighing not less than 120 gms.
387.900
Nos.
1-18-57
Providing and fixing PTMT, push cock of approved quality and colour.
82853 1-18-57-1
121.700
Nos.
82854 1-18-57-2
109.900
Nos.
1-18-58
1-18-58-1
Circular type.
82855 1-18-58-1-1
52.000
Nos.
82856 1-18-58-1-2
57.600
Nos.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-18-58-2
82857 1-18-58-2-1
1-18-59
Rate
Unit
98.600
Nos.
Providing and fixing C.I. double acting air valve of approved quality with bolts,
nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will
bepaid separately):
82858 1-18-59-1
50mm dia
4,829.100
Nos.
82859 1-18-59-2
80 mm dia
6,236.900
Nos.
82860 1-18-59-3
100mm dia
7,992.700
Nos.
1-18-60
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373
and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The
tail pieces if required will be paid separately):
82861 1-18-60-1
3,135.000
metre
82862 1-18-60-2
4,691.100
metre
82863 1-18-60-3
6,871.300
metre
82864 1-18-60-4
7,408.900
metre
1-18-61
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts,
bolts, rubber insertions etc. complete conforming to IS : 2373
82865 1-18-61-1
80 mm dia
3,673.500
each
82866 1-18-61-2
100mm dia.
5,933.400
each
82867 1-18-61-3
150 mm dia
7,510.400
each
82868 1-18-61-4
200mm dia
7,023.200
each
1-18-62
Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated rod with L.P./ H.P.H.D. plastic ball.
82869 1-18-62-1
240.100
Nos.
82870 1-18-62-2
339.900
Nos.
82871 1-18-62-3
648.500
Nos.
82872 1-18-62-4
40mm nominal bore, 206mm long, weighing not less than 690gms.
1,247.300
Nos.
82873 1-18-62-5
50mm nominal bore, 242mm long, weighing not less than 1240gms
1,565.900
Nos.
82874 1-18-63
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not
less than 85gms.
192.000
Nos.
82875 1-18-64
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not
less than 40gms.
140.200
Nos.
175.400
Nos.
82876 1-18-65
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements weighing not less
than 106 gms.
Building Works Based On CPWD skeleton - 2014-2015 Page 147 of 184
16/05/2014 - 1-18
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers
and caps etc, suitable for flanged jointing as per IS : 1538
82877 1-18-66-1
Upto300mmdia
6,605.100 Quintal
82878 1-18-66-2
9,831.100 Quintal
1-18-67
Providing and laying S&S C.I. Standard specials suitable for mechanical jointing
as per IS : 13382
82879 1-18-67-1
Upto 300mmdia
10,769.600 Quintal
82880 1-18-67-2
11,356.200 Quintal
1-18-68
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per
IS : 9523
82881 1-18-68-1
Upto 600mmdia
15,462.100 Quintal
82882 1-18-68-2
18,180.000 Quintal
1-18-69
Providing and laying D.I Specials of Class K-12suitable for mechanical jointing as
per IS :9523
82883 1-18-69-1
16,283.300 Quintal
82884 1-18-69-2
23,263.300 Quintal
1-18-70
82885 1-18-70-1
57.800
each
82886 1-18-70-2
87.200
each
82887 1-18-70-3
134.300
each
82888 1-18-70-4
162.500
each
82889 1-18-70-5
220.200
each
82890 1-18-70-6
240.100
each
82891 1-18-70-7
395.200
each
82892 1-18-70-8
456.300
each
82893 1-18-70-9
492.800
each
82894 1-18-70-10
630.500
each
82895 1-18-70-11
218.800
each
82896 1-18-70-12
893.300
each
82897 1-18-70-13
1,133.100
each
82898 1-18-70-14
1,457.300
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
82899 1-18-70-15
1-18-71
Rate
Unit
1,720.300
each
Providing and laying Double Flanged (screwed/ welded) Centrifugally (Spun) Cast
Iron, Class B (IS : 1536):
82900 1-18-71-1
1,669.900
metre
82901 1-18-71-2
2,616.200
metre
82902 1-18-71-3
4,132.200
metre
82903 1-18-71-4
5,008.400
metre
82904 1-18-71-5
6,397.500
metre
82905 1-18-71-6
8,073.200
metre
82906 1-18-71-7
10,461.000
metre
82907 1-18-71-8
13,311.100
metre
82908 1-18-71-9
16,467.800
metre
82909 1-18-71-10
22,854.900
metre
1-18-72
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes
conforming to IS : 8329
82910 1-18-72-1
953.300
metre
82911 1-18-72-2
1,384.500
metre
82912 1-18-72-3
1,925.400
metre
82913 1-18-72-4
2,611.900
metre
82914 1-18-72-5
3,585.200
metre
82915 1-18-72-6
4,295.800
metre
82916 1-18-72-7
5,044.300
metre
82917 1-18-72-8
6,095.700
metre
82918 1-18-72-9
7,148.200
metre
82919 1-18-72-10
9,382.200
metre
82920 1-18-72-11
11,939.400
metre
82921 1-18-72-12
14,916.500
metre
82922 1-18-72-13
19,616.600
metre
82923 1-18-72-14
20,816.700
metre
82924 1-18-72-15
957.900
metre
82925 1-18-72-16
1,436.400
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82926 1-18-72-17
1,975.100
metre
82927 1-18-72-18
2,750.600
metre
82928 1-18-72-19
3,421.200
metre
82929 1-18-72-20
4,204.700
metre
82930 1-18-72-21
5,382.500
metre
82931 1-18-72-22
6,221.400
metre
82932 1-18-72-23
7,860.500
metre
82933 1-18-72-24
9,487.000
metre
82934 1-18-72-25
13,141.800
metre
82935 1-18-72-26
14,225.000
metre
82936 1-18-72-27
14,369.100
metre
82937 1-18-72-28
17,361.000
metre
82938 1-18-72-29
19,536.900
metre
1-18-73
82939 1-18-73-1
2,581.200
metre
82940 1-18-73-2
4,141.500
metre
82941 1-18-73-3
4,869.800
metre
82942 1-18-73-4
4,082.800
metre
82943 1-18-73-5
8,248.300
metre
82944 1-18-73-6
10,423.200
metre
82945 1-18-73-7
12,564.700
metre
82946 1-18-73-8
15,272.700
metre
82947 1-18-73-9
17,875.700
metre
82948 1-18-73-10
24,418.700
metre
82949 1-18-73-11
30,310.200
metre
1-18-74
Providing and fixing unplastisised P.V.C. connection pipe with PTMT Nuts of
approved quality and colour.
82950 1-18-74-1
61.900
each
82951 1-18-74-2
73.900
each
1-18-75
Providing and fixing PTMT extension nipple for water tank pipe, fittings of
approved quality and colour
Building Works Based On CPWD skeleton - 2014-2015 Page 150 of 184
16/05/2014 - 1-18
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
6.700
Nos.
82953 1-18-75-2
51.300
Nos.
82954 1-18-75-3
73.600
Nos.
1-18-76
Cutting holes upto 30x30 cm in walls including making good the same
82955 1-18-76-1
236.600
Nos.
82956 1-18-77
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.
and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including
finishing complete so as to make it leak proof.
185.700
each
82957 1-18-78
Making chases upto 7.5x7.5 cm in wails including making good and finishing with
matching surface after housing G.I. pipe etc.
81.200
metre
82958 1-18-79
Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in
masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) including disposal of malba
144.500
metre
1-18-80
Disinfecting C.I. water mains by flushing with water containing bleaching powder at
0.5 gms per litre of water and cleaning the same with fresh water, operation to be
repeated three times including getting the sample of water from the disinfected main
tested in the municipal laboratory
8.500
metre
82959 1-18-80-1
82960 1-18-80-2
11.100
metre
82961 1-18-80-3
13.700
metre
82962 1-18-80-4
16.400
metre
82963 1-18-80-5
21.800
metre
82964 1-18-80-6
25.500
metre
82965 1-18-80-7
30.500
metre
82966 1-18-80-8
33.800
metre
82967 1-18-80-9
37.300
metre
82968 1-18-80-10
40.900
metre
82969 1-18-80-11
44.600
metre
82970 1-18-80-12
52.400
metre
1-18-81
Extra for every operation of disinfecting the C.I. main by flushing with water
containing bleaching powder at 0.5 gms per litre of water and cleaning the same
with fresh water, including getting the samples of water tested in the municipal
laboratory
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82971 1-18-81-1
3.200
metre
82972 1-18-81-2
3.800
metre
82973 1-18-81-3
4.600
metre
82974 1-18-81-4
5.300
metre
82975 1-18-81-5
7.700
metre
82976 1-18-81-6
9.000
metre
82977 1-18-81-7
10.300
metre
82978 1-18-81-8
12.100
metre
82979 1-18-81-9
13.900
metre
82980 1-18-81-10
15.800
metre
82981 1-18-81-11
16.800
metre
82982 1-18-81-12
21.600
metre
1-18-82
Dismantling old C.I. pipes including excavation and refilling trenches after taking
out the pipes, breaking lead caulked joints, melting of lead and making into blocks
including stacking of pipes at site lead upto 50 metre
82983 1-18-82-1
189.400
metre
82984 1-18-82-2
186.600
metre
82985 1-18-82-3
204.500
metre
82986 1-18-82-4
212.100
metre
82987 1-18-82-5
236.200
metre
82988 1-18-82-6
259.900
metre
82989 1-18-82-7
280.800
metre
82990 1-18-82-8
300.400
metre
82991 1-18-82-9
318.300
metre
82992 1-18-82-10
336.700
metre
82993 1-18-82-11
352.900
metre
82994 1-18-82-12
381.200
metre
1-18-83
82995 1-18-83-1
65.600
each
82996 1-18-83-2
88.100
each
82997 1-18-83-3
122.500
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
82998 1-18-83-4
165.600
each
82999 1-18-83-5
220.900
each
83000 1-18-83-6
274.400
each
83001 1-18-83-7
329.700
each
83002 1-18-83-8
383.200
each
83003 1-18-83-9
438.200
each
83004 1-18-83-10
491.900
each
83005 1-18-83-11
548.800
each
83006 1-18-83-12
652.100
Nos.
0.000
each
1-18-84
83007 1-18-84-1
Specification:
Providing & fixing chrome plated brass battery based infrared sensor operated pillar
cock, having foam flow technology.
15 mm nominal bore.
16/07/15 12:42
Rate Card
Chapter Name
Drainage
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-19-1
Rate
Unit
Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture
83008 1-19-1-1
100 mm diameter
195.100
metre
83009 1-19-1-2
150 mm diameter
299.200
metre
83010 1-19-1-3
200 mm diameter
479.900
metre
83011 1-19-1-4
230 mm diameter
468.700
metre
83012 1-19-1-5
250 mm diameter
676.600
metre
83013 1-19-1-6
300 mm diameter
749.500
metre
1-19-2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
83014 1-19-2-1
0.000
metre
83015 1-19-2-2
752.300
metre
83016 1-19-2-3
877.000
metre
83017 1-19-2-4
960.100
metre
83018 1-19-2-5
1,014.100
metre
1-19-3
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
83019 1-19-3-1
292.400
metre
83020 1-19-3-2
473.800
metre
83021 1-19-3-3
556.900
metre
83022 1-19-3-4
611.000
metre
83023 1-19-3-5
648.400
metre
83024 1-19-3-6
748.100
metre
1,966.500
metre
0.000
metre
1-19-4
Providing and fixing square-mouth S.W. gully trap grade A complete with C.I.
1-19-4-1
83025 1-19-4-1-1
83026 1-19-4-1-2
1-19-4-2
83027 1-19-4-2-1
0.000
metre
83028 1-19-4-2-2
0.000
metre
0.000
metre
1-19-4-3
83029 1-19-4-3-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
83030 1-19-4-3-2
1-19-5
Rate
Unit
0.000
metre
Dismantling of old S.W. pipes including breaking of joints and bed concrete
stacking
83031 1-19-5-1
100 mm diameter
24.700
metre
83032 1-19-5-2
150 mm diameter
27.300
metre
83033 1-19-5-3
200 mm diameter
29.100
metre
83034 1-19-5-4
230 mm diameter
29.900
metre
83035 1-19-5-5
250 mm diameter
30.800
metre
83036 1-19-5-6
300 mm diameter
32.500
metre
83037 1-19-5-7
350 mm diameter
37.500
metre
83038 1-19-5-8
400 mm diameter
41.000
metre
83039 1-19-5-9
450 mm diameter
42.700
metre
1-19-6
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars
83040 1-19-6-1
361.100
metre
83041 1-19-6-2
457.600
metre
83042 1-19-6-3
748.200
metre
83043 1-19-6-4
855.800
metre
83044 1-19-6-5
1,365.000
metre
83045 1-19-6-6
1,562.700
metre
83046 1-19-6-7
1,930.200
metre
83047 1-19-6-8
2,386.200
metre
83048 1-19-6-9
2,820.500
metre
83049 1-19-6-10
3,684.800
metre
83050 1-19-6-11
4,282.300
metre
83051 1-19-6-12
4,953.400
metre
83052 1-19-6-13
5,583.800
metre
9,949.400
each
1-19-7
1-19-7-1
Inside size 90x80 cm and .45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15 kg):
83053 1-19-7-1-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
83054 1-19-7-1-2
1-19-7-2
Rate
Unit
9,292.700
each
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium
duty) 500 mm internal diameter, total weight of cover and frame to be not less
than 116 kg (weight of cover 58 kg and weight of frame 58 kg):
83055 1-19-7-2-1
17,706.200
each
83056 1-19-7-2-2
15,935.100
each
1-19-7-3
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy
duty) 560 mm internal diameter, total weight of cover and frame to be not less
than 208 kg (weight of cover 108 kg and weight of frame 100 kg)
83057 1-19-7-3-1
25,327.600
each
83058 1-19-7-3-2
23,780.700
each
1-19-8
1-19-8-8-1
Size 90x80 cm
83059 1-19-8-8-1-1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5,619.400
metre
83060 1-19-8-8-1-2
6,728.700
metre
1-19-8-2
Size 120x90 cm
83061 1-19-8-2-1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
9,010.400
metre
83062 1-19-8-2-2
6,728.700
metre
1-19-9
Constructing brick masonry circular type manhole 0.91m internal dia at bottom
1-19-9-1
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)
560mm internal diameter conforming to I.S. 12592, total-weight of cover and frame
to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) including centering shuttering all
complete. (Excavation, foot rests and 12mm thick cement plaster at the external
surface shall be paid for separately):
83063 1-19-9-1-1
19,555.400
each
83064 1-19-9-1-2
18,420.800
each
1-19-10
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m
83065 1-19-10-1
9,184.200
metre
83066 1-19-10-2
4,838.400
metre
1-19-11
1-19-11-1
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
560mm internal diameter conforming to I.S. 12592, total weight of cover and frame
to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering
all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external
Building Works Based On CPWD
2014-2015
surfaceskeleton
shall be -paid
for separately):
Page 156 of 184
16/05/2014 - 1-19
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external
surface shall be paid for separately):
83067 1-19-11-1-1
28,993.300
each
83068 1-19-11-1-2
26,459.100
each
1-19-12
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m
83069 1-19-12-1
6,242.000
metre
83070 1-19-12-2
6,242.000
metre
1-19-13
1-19-13-1
2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
560mm internal diameter conforming to I.S. 12592, total weight of cover and frame
to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) including centering
shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster
at the external surface shall be paid for separately):
83071 1-19-13-1-1
58,833.300
each
83072 1-19-13-1-2
53,230.000
each
1-19-14
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30
m:
83073 1-19-14-1
15,020.100
metre
83074 1-19-14-2
15,020.100
metre
1-19-15
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement
83075 1-19-15-1
284.900
metre
83076 1-19-15-2
250.100
metre
83077 1-19-16
325.100
metre
294.900
metre
1-19-17
83078 1-19-17-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
83079 1-19-17-1
1-19-18
Rate
Unit
331.100
metre
83080 1-19-18-1
455x610 mm rectangular C.I. cover (light duty)the weight of the cover to be not
less than 23 kg.
1,237.500
metre
83081 1-19-18-2
500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less
than 58 kg.
2,056.000
metre
83082 1-19-18-3
560 mm diameter C.I, cover (heavy duty) the weight of the cover to be not less than
108 kg.
5,932.600
metre
1-19-19
Providing and fixing in position precast R.C.C. manhole cover and frame of required
1-19-19-1
L D- 2.5
83083 1-19-19-1-1
1,186.000
metre
83084 1-19-19-1-2
1,002.200
metre
83085 1-19-19-1-3
943.600
metre
1-19-19-2
MD- 10
83086 1-19-19-2-1
1,192.200
metre
83087 1-19-19-2-2
1,020.200
metre
9,623.600
each
1,703.700
metre
342.600
metre
1-19-19-3
83088 1-19-19-3-1
1-19-19-4
HD-20
Circular shape 560 mm internal diameter
EHD - 35
83089 1-19-19-4-1
83090 1-19-20
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard
pattern) the weight of cover to be not less than 4.5kg
1-19-21
Making connection of drain or sewer line with existing manhole including breaking
83091 1-19-21-1
357.900
cu.m
83092 1-19-21-2
440.000
cu.m
83093 1-19-21-3
642.800
cu.m
1-19-22
Providing sand cast iron drop connection externally for 60 cm drop from branch
83094 1-19-22-1
7,493.200
metre
83095 1-19-22-2
10,699.800
metre
1-19-23
Extra for depths beyond 60 cm of sand cast iron drop connection complete :
83096 1-19-23-1
2,088.500
metre
83097 1-19-23-2
3,554.100
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-19-24
Rate
Unit
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including
83098 1-19-24-1
717.500
cu.m
83099 1-19-24-2
1,257.400
cu.m
83100 1-19-24-3
2,378.900
cu.m
83101 1-19-24-4
1,516.300
cu.m
1-19-25
83102 1-19-25-1
572.400
metre
83103 1-19-25-2
681.500
metre
83104 1-19-25-3
Rectangular arch type manhole 140x90 cm and 2.45m deep (upto 4.25 m depth).
992.200
cu.m
83105 1-19-25-4
Circular manhole 122 cm diameter and 1.68 m deep (upto 2.29 m depth)
2,413.500
cu.m
1-19-26
Raising manhole cover and frame slab to required level including dismantling
83106 1-19-26-1
1,638.700
each
83107 1-19-26-2
2,560.400
each
83108 1-19-26-3
2,079.100
each
83109 1-19-26-4
Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35
220.900
each
4,649.700
cu.m
6,246.000
cu.m
9,290.400
cu.m
6,006.500
cu.m
1-19-27
83110 1-19-27-1
1-19-28
83111 1-19-28-1
1-19-29
83112 1-19-29-1
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class
With F.P.S. bricks
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class
With F.P.S. Bricks
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of
With F.P.S. bricks
1-19-30
1-19-30-3
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more
inlets :
83113 1-19-30-3-1
1-19-30-2
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
smooth with a floating coat of neat cement on walls and bed concrete etc.
complete as per standard design :
1-19-30-2-2
83114 1-19-30-2-2-1
1-19-30-1
83115 1-19-30-1-1
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two
inlets
With F.P.S. bricks
1-19-31-1
1-19-31-2
83117 1-19-31-2-1
1-19-31-3
83118 1-19-31-3-1
1-19-32
5,267.900
cu.m
5,269.500
metre
5,739.500
metre
29,662.100
metre
34,334.800
Nos.
4,187.300
metre
83119 1-19-32-1
83120 1-19-33
Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain
pipe 100 mm diameter and 1.20 m long complete as per standard design.
1-19-34
cu.m
1-19-31
83116 1-19-31-1-1
6,263.700
83121 1-19-34-2
150 mm dia
389.500
Nos.
83122 1-19-34-1
100 mm dia
287.300
Nos.
83123 1-19-04-1
Providing and fixing square-mouth S.W. gully trap grade 'A'' complete
with C.I. grating brick masonry chamber with water tight C.I. cover
with frame of 300 x300 mm size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design :
100x100 mm size P type
With F.P.S. Bricks class designation 75
1,966.500
each
83124 1-19-04-2
1,988.400
each
83125 1-19-04-3
2,596.500
each
83126 1-19-04-4
Specification:
2,076.400
each
16/07/15 12:42
Rate Card
Chapter Name
Pile Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-20-1
Rate
Unit
Providing, driving and installing driven cast-in-situ reinforced cement concrete piles
83127 1-20-1-1
1,672.400
metre
83128 1-20-1-2
1,981.700
metre
83129 1-20-1-3
667.900
metre
83130 1-20-1-4
2,687.300
metre
83131 1-20-1-5
4,748.300
metre
83132 1-20-1-6
8,248.000
metre
83133 1-20-1-7
11,344.500
metre
83134 1-20-1-8
16,983.400
metre
1-20-2
83135 1-20-2-1
1,720.500
metre
83136 1-20-2-2
2,399.600
metre
83137 1-20-2-3
2,936.700
metre
83138 1-20-2-4
3,277.600
metre
83139 1-20-2-5
4,266.500
metre
83140 1-20-2-6
6,246.100
metre
83141 1-20-2-7
10,952.900
metre
83142 1-20-2-8
14,859.200
metre
83143 1-20-2-9
21,471.300
metre
1-20-3
Boring, Providing and installing cast in situ single under reamed piles of specified
83144 1-20-3-1
1,613.100
metre
83145 1-20-3-2
2,687.200
metre
83146 1-20-3-3
3,319.100
metre
83147 1-20-3-4
3,815.500
metre
1-20-4
Extra over item No. 20.3 for providing additional bulb in under reamed piles, under
83148 1-20-4-1
1,022.100
each
83149 1-20-4-2
1,490.300
each
83150 1-20-4-3
1,785.300
each
83151 1-20-4-4
2,178.100
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-20-5
Rate
Unit
Providing, driving and installing driven Pre-cast reinforced cement concrete piles
83152 1-20-5-1
4,057.200
metre
83153 1-20-5-2
4,196.600
metre
83154 1-20-5-3
5,856.400
metre
83155 1-20-5-4
6,905.400
metre
83156 1-20-5-5
14,699.900
metre
83157 1-20-5-6
20,828.600
metre
1-20-6
Vertical load testing of piles in accordance with IS 2911 (Part IV) including
installation
of loading platform and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification & the direction
of Engineer in-charge.
1-20-6-1
83158 1-20-6-1-1
Initial test.
83159 1-20-6-1-2
Routine test
1-20-6-2
83160 1-20-6-2-1
Initial test
83161 1-20-6-2-2
Routine test.
1-20-6-3
83162 1-20-6-3-1
Initial test
83163 1-20-6-3-2
Routine test
1-20-7
Cyclic vertical load testing of pile in accordance with IS Code of practice IS : 2911
(part IV) including preparation of pile head etc for.
1-20-7-1
Single pile.
83164 1-20-7-1-1
83165 1-20-7-1-2
1-20-7-2
83166 1-20-7-2-1
1-20-8
Lateral load testing of single pile in accordance with IS Code of practice IS : 2911
(Part IV) for determining safe allowable lateral load on pile :
83167 1-20-8-1
83168 1-20-8-2
83169 1-20-9
Integrity of pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in
accordance with IS 14893 including surface preparation of pile top by removing
Building Works Based On CPWD
skeleton
162 lumps
of 184etc. and use of computerised
soil, mud,
dust- 2014-2015
& chipping- leanPage
concrete
16/05/2014 - 1-20
equipment and high skill trained personal for conducting the test & submission of
results, all complete as per direction of Engineer-in-charge.
NOTE :- The inclusion of the above item in the schedule of work shall be
judiciously decided by the technical sanctioning authority, keeping in view the
quality control, type of soil strata & importance of the project.
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
16/07/15 12:42
Rate Card
Chapter Name
Aluminium Work
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-21-1
Providing and fixing aluminium work for doors, windows, ventilators and partitions
1-21-1-1
Rate
Unit
83170 1-21-1-1-1
363.000 kilogram
83171 1-21-1-1-2
363.000 kilogram
83172 1-21-1-1-3
380.300 kilogram
1-21-1-2
For shutters of doors, windows & ventilators including providing and fixing hinges/
pivots and making provision for fixing of fittings wherever required including the
cost of PVC / neoprene gasket required (Fittings shall be paid for separately).
83173 1-21-1-2-1
499.500 kilogram
83174 1-21-1-2-2
398.200 kilogram
83175 1-21-1-2-3
408.400 kilogram
1-21-2
Providing and fixing 12mm thick prelaminated particle board flat pressed three
83176 1-21-2-1
Pre-laminated particle board with decorative lamination on one side and balancing
lamination on other side.
1,031.100
sq.m
83177 1-21-2-2
1,080.400
sq.m
990.300
sq.m
1,274.800
sq.m
947.600
sq.m
1-21-3
Providing and fixing glazing in aluminium door, window, ventilator shutters and
83178 1-21-3-1
83179 1-21-3-2
83180 1-21-3-3
1-21-4
Providing and fixing double action hydraulic floor spring of approved brand and
83181 1-21-4-1
2,034.900
each
83182 1-21-4-2
2,224.100
each
83183 1-21-5
468.800 kilogram
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
separately).
83184 1-21-6
1-21-7
102.000
each
83185 1-21-7-1
461.400 kilogram
83186 1-21-7-2
461.400 kilogram
1-21-8
83187 1-21-8-1
1-21-9
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work
Upto 5mm depth and 5 mm width
82.900
metre
83188 1-21-9-1
-29.300 kilogram
83189 1-21-9-2
-29.300 kilogram
83190 1-21-10
1-21-11
0.000
sq.m
Providing and fixing stainless steel (SS-304 grade) adjustable friction windows
83191 1-21-11-1
205X19mm
215.000
each
83192 1-21-11-2
255X19mm
517.600
each
83193 1-21-11-3
355X19 mm
335.800
each
83194 1-21-11-4
510X19mm
588.000
each
83195 1-21-11-5
710X19mm
1,010.400
each
1-21-12
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick
83196 1-21-12-1
525.400
each
83197 1-21-12-2
525.400
each
83198 1-21-12-3
552.200
each
83199 1-21-13
1,066.200
each
83200 1-21-14
386.900 kilogram
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
83201 1-21-15-1
52.200
each
83202 1-21-15-2
53.400
each
83203 1-21-15-3
52.200
each
1-21-16
Providing and fixing aluminium round shape handle of outer dia 100mm with SS
83204 1-21-16-1
62.700
each
83205 1-21-16-2
68.600
each
83206 1-21-16-3
74.500
each
83207 1-21-17
0.000 kilogram
83208 1-21-18
Providing & fixing 12 mm thick frameless toughened glass door shutter of approved
brand and manufacture, including providing and fixing top & bottom pivot & spring
type fixing arrangment and making necessary holes etc. for fixing required door
fittings, all complete as per direction of Engineer-in-charge(Door handle, lock and
stopper etc to be paid separately).
0.000
sq.m
Specification:
16/07/15 12:42
Rate Card
Chapter Name
Water Proofing
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
83209 1-22-3
1-22-4
Rate
Unit
388.000
sq.m
Providing and Placing in position suitable PVC water stops conforming to IS:
12200 for construction/expansion joints between two RCC members and fixed to
the reinforcement with binding wire before pouring concrete etc. complete
83210 1-22-4-1
493.200
metre
83211 1-22-4-2
463.800
metre
83212 1-22-4-3
633.100
metre
83213 1-22-5
183.000
sq.m
373.200
sq.m
83214 1-22-6
Providing and laying water proofing treatment on roofs of slabs by applying cement
slurry mixed with water proofing cement compound consisting of applying: a) after
surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre
glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should
not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of
cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670
Building Works Based On CPWD
- 2014-2015
167This
of 184
kg/sqmskeleton
and coarse
sand @- 1.289Page
kg/sqm.
will be allowed to air cure for 4
16/05/2014 - 1-22
hours followed by water curing for 48 hours. The entire treatment will be taken upto
30cm on parapet wall and tucked into groove in parapet all around. d) fourth and
final layer of brick tiling with cement mortarwhich will be paid for separately (for
the purpose of measurement the entire treated surface will be measured)
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670
kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4
hours followed by water curing for 48 hours. The entire treatment will be taken upto
30cm on parapet wall and tucked into groove in parapet all around. d) fourth and
final layer of brick tiling with cement mortarwhich will be paid for separately (for
the purpose of measurement the entire treated surface will be measured)
83215 1-22-9
391.300
sq.m
83216 1-22-10
494.900
sq.m
83217 1-22-11
494.900
sq.m
83218 1-22-12
24.900
sq.m
1-22-13
Deduct for omitting in water proofing treatment final course of spreading stone
grit 6mm or down size or pea sized gravel
83219 1-22-13-13-1
19.500
sq.m
83220 1-22-13-13-2
25.200
sq.m
6,633.400
cu.m
1-22-14
83221 1-22-14-14-1
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
83222 1-22-14-14-2
8,389.900
cu.m
83223 1-22-14-14-3
3,331.200
cu.m
83224 1-22-15
628.700
sq.m
83225 1-22-16
Providing and laying in situ five course water proofing treatment with
APP (Atactic Polypropylene) modified Polymeric memberane over
roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd
& 4th courses of bonding material @ 1.20 Kg/sqm, which shall
consist of blown type bitumen of grade 85/25 conforming to IS : 702,
3rd layer of roofing membrane APP modified Polymeric membrane
2.0mm thick of 3.00 Kg/sqm weight consisting of five layers
prefabricated with centre core as 100micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix
is protected on both side with 20micron HMHDPE film. 5th, the top
most layer shall be finished with brick tiles of class designation 100
grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with
2% integral water proofing compound by weight of cement over a
12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and
finished neat which shall be paid for separately.
465.000
sq.m
818.800
sq.m
83226 1-22-17
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
1-22-1
83228 1-22-1-1
1-22-2
83229 1-22-2-1
64.600
sq.m
729.900
sq.m
1,177.700
sq.m
Providing and laying integral cement based treatment for water proofing on
horizontal surface at all depth below ground level for under ground structures
as directed by Engineer-in-Charge and consisting of :
(i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab
over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with
water proofing compound conforming to IS:2645 in the recommended
proportion over the leveling course (leveling course to be paid separately). Joints
sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand)
mixed with water proofing compound in recommended proportions.
( iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading
@ 8 cudm/sqm thoroughly embedded in the 2nd layer.
Using rough kota stone.
Providing and laying integral cement based treatment for water proofing on the
vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement
slurry mixed with water proofing compound conforming to IS:2645 in
recommended proportions with a gap of 20mm (minimum) between stone slabs
and the receiving surfaces and filling the gaps with neat cement slurry mixed with
water proofing compound and finishing the exterior of stone slab with cement
mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning
mixed with water proofing compound in recommended proportion complete at
all levels and as directed by Engineer-in-charge :
Using rough Kota stone
1-22-7
Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces
etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement
admixed with water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto 300mm
height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm
size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1
cement :5 coarse sand ) admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height including rounding of junctions
of walls and slabs .
(c) After two days of proper curing applying a second coat of cement slurry
using 2.75kg/ sqm of cement admixed with water proofing compound
Building Works Based On CPWD
skeleton
- approved
Page 170
of 184
conforming
to -IS2014-2015
: 2645 and
by Engineer-in-charge.
16/05/2014 - 1-22
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix
1:4 (1 cement :4 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge including laying
glass fibre cloth of approved quality in top layer of plaster and finally finishing the
surface with trowel with neat cement slurry and making pattern of 300x300
mm square 3mm deep.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
1-22-8
83231 1-22-8-1
1-22-18
83232 1-22-18-1
959.800
sq.m
278.700
sq.m
507.200
sq.m
Providing and laying four courses water proofing treatment with bitumen felt
over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15
conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each
course, second course of roofing felt type 3 grade-I (hessian based self finished
bitumen felt) and fourth and final course of stone grit 6mm and down size or
pea-sized gravel spread at 6 cubic diameter per square metre including
preparation of surface but excluding grading complete with :
Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
Providing and fixing APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 2mm thick water proofing membrance, black finished
reinforced with glass fibre matt consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrance manufacture of
density at 25?C, 0.87 - 0.89 kg/ ltr and viscocity 70 - 160 cps. Over the
primer coat the layer of membrane shall be laid using Butane torch and sealing
all joints etc., and preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in longitudinal
and transverse direction at 23?C as 350/300 N/ 5cm.
Tear strength in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150?C. Cold flexibility shall be upto -2?C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be
got done through the authorised applicator of the manufacture of membrane.
2mm (for corrugated roof sheets)
1-22-19
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
1-22-20
83234 1-22-20-1
Specification:
3 mm thick
630.300
sq.m
583.800
sq.m
16/07/15 12:42
Rate Card
Chapter Name
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
83235 1-23-1
83236 1-23-2
83237 1-23-3
1-23-4
Rate
Unit
31.300
cu.m
146.900
cu.m
46.900
cu.m
Supplying and stacking at site dump manure from Badli or other approved source,
including carriage upto 1 km manure measured in stacks will be reduced by 8% for
payment)
83238 1-23-4-4-1
28.700
cu.m
83239 1-23-4-04-2
43.200
cu.m
83240 1-23-4-04-3
54.800
cu.m
83241 1-23-7
1.500
sq.m
83242 1-23-8
0.200
sq.m
83243 1-23-9
1.500
sq.m
1-23-10
Grassing with Doob grass including watering and maintenance of the lawn for 30
days or more till the grass forms a thick lawn free from weeds and fit for mowing
including supplying good earth if needed (the good earth shall be paid for
separately).
83244 1-23-10-1
2.200
sq.m
83245 1-23-10-2
4.600
sq.m
83246 1-23-10-3
5.400
sq.m
83247 1-23-11
Renovating lawns including weeding, cheeling the grass, forking the ground, top
dressing with sludge or manure, mixing the same with forked soil, watering and
maintaining the lawn for 30 days or more till the grass forms a thick lawn free from
weeds and fit for mowing and disposal of rubbish as directed, including supplying
good earth if needed but excluding the cost of sludge or manure (the good earth shall
be paid for separately).
22.400
sq.m
88.600
cu.m
83248 1-23-13
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
refilling the excavated earth after breaking clods and mixing with
sludge or manure in the ratio of 8:1 (8 parts of stacked volume of
earth after reduction by 20% : one part of stacked volume of sludge
or manure after reduction by 8%), flooding with water, filling with
earth if necessary, watering and finally fine dressing, leveling etc.
including stacking and disposal of materials declared unserviceable
and surplus earth by spreading and leveling as directed, within a lead
of 50m lift up to 1.5 m complete (cost of sludge, manure or extra
earth to be paid for separately).
1-23-14
Digging holes in ordinary soil and refilling the same with the excavated earth mixed
with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% : 1 part of stacked volume of manure after reduction by
8%) flooding with water, dressing including removal of rubbish and surplus earth, if
any with all leads and lifts (cost of manure, sludge or extra good earth if needed tobe
paid for separately)
83249 1-23-14-1
315.800
each
83250 1-23-14-3
265.800
each
83251 1-23-14-2
0.000
each
83252 1-23-14-4
0.000
each
83253 1-23-16
Providing and fixing M.S. flat iron tree guard 60cm dia. and 2m height
above ground level formed of 4 nos. 25x6mm and 8 nos. 25x3mm
vertical M.S. flats rivetted to 3 nos. 25x6mm M.S. flat iron rings in two
halves, bolted together with 8mm dia. and 30mm long bolts including
painting two coats with paint of approved brand and manufacture
over a coat of priming, complete in all respects.
3,400.600
each
1-23-17
Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar
drums supplied free by the department including providing and fixing 2 nos. M.S.
sheet rings 50 x 0.5 mm with rivets complete in all respects including painting inside
and outside of tree guard with
83254 1-23-17-1
226.300
each
83255 1-23-17-2
466.900
each
1-23-18
Making tree guard 53 cm dia. and 2 m high as per design from empty coal tar
drums supplied free by the department including providing and fixing four legs 40
cm long of 30 x 3 mm M.S. flat riveted to tree guard and providing and fixing 2 nos.
M.S. sheet rings 50 x 0.5 mm with rivets complete in all respects including painting
inside and outside of tree guard with
83256 1-23-18-1
454.500
each
83257 1-23-18-2
902.700
each
1-23-19
Edging with bricks laid dry length wise including excavation, refilling, consolidating
with hand packing and spreading neatly surplus earth within a lead of 50 m
Building Works Based On CPWD skeleton - 2014-2015 Page 174 of 184
16/05/2014 - 1-23
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
with hand packing and spreading neatly surplus earth within a lead of 50 m
1-23-19-1
83258 1-23-19-1-1
1-23-19-2
75 class designation
F.P.S. Bricks
55.100
metre
19.700
metre
50 designation
83259 1-23-19-2-1
F.P.S. bricks.
83260 1-23-20
7.300
cu.m
83261 1-23-21
203.400
cu.m
83262 1-23-22
226.700
cu.m
83263 1-23-23
279.000
cu.m
83264 1-23-24
Flodding the ground with water including making kiaries and dismantling the same.
1.200
sq.m
83265 1-23-5
0.600
sq.m
83266 1-23-6
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with
water including disposal of uprooted vegetation.
2.000
sq.m
83267 1-23-7
261.900
sq.m
83268 1-23-25
Supplying and stacking of well decayed cow during manure at site including royalty
and carriage upto 1 km. (Cow dung manure measurred in stacks will reduced by 8%
for payment).
0.000
cu.m
1-23-30
Providing Square Cement Concrete pots of specified size, cast with cement concrete
of nominal mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm
nominal size), reinforced with 7 Nos. ( 3 nos. horizontal & 4 nos. vertical "U"
shape) M.S. wires of 3.5 mm dia as per design, including required form works,
finishing with cement punning on exposed surface, curing for specified period and
stacking in required rows & height, all complete as per direction of
Officer-in-charge.
0.000
each
83269 1-23-30-1
Top inner width 35 cm. outer bottom width 25 cm. total height 35 cm. and wall
thickness 25.4 mm.
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-23-29
Rate
Unit
Providing Circular Cement Concrete pots of specified size, cast with cement
concrete of nominal mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6
mm nominal size), reinforced with 7 Nos. ( 3 nos. horizontal & 4 nos. vertical "U"
shape) M.S. wires of 3.5 mm dia as per design, including required form works,
finishing with cement punning on exposed surface, curing for specified period and
stacking in required rows & height, all complete as per direction of
Officer-in-charge.
83270 1-23-29-1
Top inside dia 35 cm , outer bottom dia 25 cm, total height 35 cm with wall
thickness of 25.4 mm.
0.000
each
83271 1-23-29-2
Top inside dia 30 cm , outer bottom dia 20 cm, total height 30 cm with wall
thickness of 25.4 mm.
0.000
each
83272 1-23-12
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm,
removing all weeds and other growth with roots by forking repeatedly, breaking
clods, rough dressing, flooding with water, uprooting fresh growths after 10to 15
days then fine dressing for planting new grass, including disposal of all rubbish with
all leads and lifts.
0.000
sq.m
1-23-15
Half brick circular tree guard in 50 class designation bricks, internal diameter
1.25 metre and height 1.2 metre above ground and 0.20 m below ground bottom
two courses laid dry and top three courses in cement mortar 1:6 (1 cement :
6 fine sand) and the intermediate
courses being in dry honey comb masonry as per design complete:
83273 1-23-15-1
With common burnt clay F.P.S. (non modular) bricks of class designation 5.
0.000
each
83274 1-23-26
Providing and fixing M.S. tree guard 45 cm. souare in plan, height 1.20 metre above
ground level and 0.40 metre below ground level. The vertical members shall consist
of four nos. angle iron of size 25x25x3 mm, 1.8 m long, one at each corner and 8
nos. flat iron of size 25x3 mm, 1.2 m long. The vertical members shall be welded to
4 nos. 25x6 mm M.S. flats placed horizontally around the vertical member of the
cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded
to the tree guard near the middle height and lettered CPWD/PWD/ any other
approved name . The tree guard shall be fixed to the ground by making suitable
holes and by embedding four corners leg in the ground, including refilling the earth,
compaction etc. complete. The tree guard shall be painted with two or more coats of
synthetic enamel paint of approved brand and manufacture over a coat of primer,
complete in all respect.
0.000
each
83275 1-23-27
Providing and fixng M.S. tree guard 50 cm square in plan, height 1.40 metre above
ground level and 0.50 metre below ground level. The vertical members shall consist
of four nos. of angle iron of size 25x25x5 mm 1.9 long, one at each corner and 8
nos. flat iron of size 25x5 mm 1.4 long. The vertical members shall be welded to 4
nos. 25x6 mm M.S. flats placed horizontally around the vertical member of the cage.
One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to
the tree guard near the middle height and lettered CPWD/PWD/ any other approved
name. The tree guard shall be fixed to the ground, including refilling the earth,
compaction etc. complete. The tree guard shall be painted with two coats of paint of
approved brand and manufacture over a coat of primer, complete in all respect.
0.000
each
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
83276 1-23-28
Rate
178.300
Unit
cu.m
Specification:
16/07/15 12:42
Rate Card
Chapter Name
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-24-1
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable
method prescribed in IS : 2008 (part I), including collecting samples from strata,
preparing and submitting strata chart/bore log, including hire & running charges of
all equipments, tools plants & machineries required for the job ,all complete as per
direction of Engineer-in-charge, upto 90 metre depth below ground level.
1-24-1-1
Rate
Unit
83277 1-24-1-1-1
300 mm dia
479.800
metre
83278 1-24-1-1-2
350 mm dia
524.800
metre
83279 1-24-1-1-3
400 mm dia
671.700
metre
1-24-1-2
83280 1-24-1-2-1
300 mm dia
918.600
metre
83281 1-24-1-2-2
350 mm dia
1,086.600
metre
83282 1-24-1-2-3
400 mm dia
1,196.800
metre
1-24-2
Boring/ drilling well of required dia for casing/strainer pipe, by suitable method
prescribed in IS : 2800 (part I), including collecting samples from different strata,
preparing and submitting strata chart/bore log, including hire & running charges of
all equipments, tools, plants & machineries requires for the job, all complete as per
direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below
ground level.
1-24-2-1
83283 1-24-2-1-1
300 mm dia
559.700
metre
83284 1-24-2-1-2
350 mm dia
621.900
metre
83285 1-24-2-1-3
400 mm dia
839.600
metre
1-24-2-2
83286 1-24-2-2-1
300 mm dia
1,111.500
metre
83287 1-24-2-2-2
350 mm dia
1,119.700
metre
83288 1-24-2-2-3
400 mm dia
1,421.000
metre
1-24-3
83289 1-24-3-1
1.400
metre
83290 1-24-3-2
297.400
metre
83291 1-24-3-3
2.900
metre
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-24-4
Rate
Unit
83292 1-24-4-1
297.400
metre
83293 1-24-4-2
297.400
metre
83294 1-24-4-3
300.800
metre
83295 1-24-5
Supplying , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm,
in recharge pit, in the required thickness, for all leads & lifts, all complete as per
direction of Engineer-in-charge.
72.800
cu.m
83296 1-24-6
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the
recharge pit, over the existing layer of boulders, in required thickness, for all leads
& lifts, all complete as per direction of Engineer-in-charge.
72.800
cu.m
83297 1-24-7
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm
in recharge pit, in required thickness over gravel layer, for all leads & lifts, all
complete as per direction of Engineer-in-charge.
72.800
cu.m
83298 1-24-8
86.200
cu.m
83299 1-24-9
Providing and fixing factory made precast RCC perforated drain covers, having
concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced wirh 8
mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including
providing 50 mm dia perforations @ 10 to 125 mm c/c, including providing edge
binding with M.S. flats of size 50 mmx 1.6 mm complete, all as per direction of
Engineer-in-charge.
15.000
Nos.
1-24-10
Supplying, assembling, lowering and fixing in vertical position in bone well, ERW
(Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended
casing pipes of requried dia, conforming to IS: 4270, of reputed & approved make,
including painted with outside surface wirh two coats of anticorrosive paint of
approved brand and manufacture, including required hire & labour charges, fittings
& accessories, all complete, for all depths, as per direction of Engineer-in-charge.
83300 1-24-10-1
659.300
metre
83301 1-24-10-2
673.700
metre
83302 1-24-10-3
659.300
metre
1-24-11
Supplying , assembling, lowering and fixing in vertical position in hole well, ERW
(Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm)
mid steel threaded and socketed / plain bevel ended pipe (type A) of required dia,
conforming to IS :8110, of reputed and approved make, having wall thickness not
less than 5.40 mm, including painted with outside surface with two coats of
anticorrosive bitumestic paint of approved brand and manufacture, including hire &
labour charges, fittings & accessories , all complete , for all depths, as per direction
of Engineer-in-charge.
Building Works Based On CPWD
skeleton - 2014-2015 Page 179 of 184
16/05/2014 - 1-24
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
of Engineer-in-charge.
83303 1-24-11-1
659.300
metre
83304 1-24-11-2
673.700
metre
83305 1-24-11-3
667.300
metre
83306 1-24-12
412.600
hours
1-24-13
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the
top of bore well housing / casing pipe, removable as per requirement all complete
for borewell of :-
83307 1-24-13-1
100 mm dia
0.000
each
83308 1-24-13-2
150 mm dia
0.000
each
83309 1-24-13-3
200 mm dia
0.000
each
1-24-14
Providing and fixing M.S. clamp of required dia to the top casing / housing pipe of
tubewell as per IS : 2800 (part I) , including necessary bolts & nuts of required size
complete.
83310 1-24-14 -1
100 mm clamp
25.000
each
83311 1-24-14 -2
150 mm clamp
30.000
each
83312 1-24-14 -3
200 mm clamp
30.000
each
1-24-15
Providing and fixing Bail plug / Bottom plug of required dia to the bottom of pipe
assembly of tubewell as per IS : 2800 (part I).
83313 1-24-15-1
100 mm dia
5.000
Nos.
83314 1-24-15-2
150 mm dia
5.000
Nos.
83315 1-24-15-3
Specification:
200 mm dia
5.000
Nos.
16/07/15 12:42
Rate Card
Chapter Name
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
83316 1-25-1
Raking out joints of stone masonry surface to the required width and depth, with due
care and precaution by mechanical / manual means, including preparing and
cleaning the surface for re-pointing/ reffiling of joints, including disposal of rubbish
to the dumping ground within 50 metre lead.
196.800
sq.m
83317 1-25-2
Providing and fixing double scaffolding system (cup lock type) on the exterior side
of building / structure, upto 25 metre height above ground level, including additional
row of scaffolding in stepped manner as per requirement of site, made with 40 mm
dia M.S. tube, placed 1.5 metre centre, horizontal & vertical tubes joint with cup &
lock system with M.S. tubes, M.S. tubes challis, M.S. clamps and staircases system
in the scaffolding for working platform etc. and maintaining it in a serviceable
condition for execution of work of cleaning and / or pointing and / or applying
chemical and removing it thereafter. The scaffolding system shall be stiffened with
bracings, runners, connecting with the building etc. wherever required if feasible for
inspection of wor k at required location with essential safety features for the
woekmen etc. complete as per directions and approval of Engineer-in-charge.
Note :- (1) The ekevational area of the scaffolding shall be measured for payment
purpose
.
(2) The payment will be made once only for execution of all items of such
works.
88.200
sq.m
83318 1-25-3
Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil,
algae, fungus, monkey beats, vegetable growth etc. including providing,applying
and washing he surface with liquid Ammonia Chemical of 5% solution and other
chemical cleaning agent as approved by Archaeological Survey of India /
Engineer-in-charge, of approved brand and manufacturer, with the help of required,
without causing with machine operated water jet mixed with desired quantity of fine
silca where ever required, without causing any scratching / damage to the stone
surface and finally washing the surface with clean water with the help of pressure jet
machine, complete in all respect including taking all precautions to safeguard
ventilators, windows, doors etc. by suitable covering so as to avoid any damage to
the buikding / structure, all as per direction of Engineer-in-charge (The rate is
materials & labours involved except scaffolding).
657.700
sq.m
83319 1-25-4
23.900
sq.m
83320 1-25-5
Ruled / Flush pointing in Red Sand stone masonary surface with lime, surkhi and
marble dust mortar in the ratio of 1:1.5:1/2 (One lime 1.5 surkhi (50% red and 50%
light yellow surkhi) : 1/2 marble dust). (The rate is inclusive of all materials &
labours involved except scaffolding).
1,137.100
sq.m
83321 1-25-6
Ruled / Flush pointing in White Sand stone masonary surface with lime, surkhi and
marble dust mortar in the ration of 1:1.5>1/2 (one lime 1.5 surkhi (15% dark red and
85% light yellow surkhi) :1/2 marble dust). (The rate is inclusive of all materials &
labours involved except scaffolding ).
113.700
sq.m
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
83322 1-25-7
113.400
sq.m
83323 1-25-8
15.800
sq.m
Specification:
16/07/15 12:42
Rate Card
Chapter Name
Other Items
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
1-26-1
Rate
Unit
Water based bio-degradable epoxy polymide chemical on roof for water proofing
treatment
83324 1-26-1-1
1,064.800
sq.m
83325 1-26-1-2
899.700
sq.m
83326 1-26-2
276.900
sq.m
83327 1-26-3
Extra for vaccum dewatering in fresh concrete work, including levelling with screed
vibrator, removing excess water through vaccum pump with bottom and top filter
mats, duly sealing the edges al round, finishing with power floater and brooming
with wire brush etc., complete as per specifications and directions of the
Engineer-in-Charge.(The panel shuttering work shall be paid separately).The rates
are for one cum of concrete.
171.000
cu.m
Cleaning the existing screed, removing all old treatment such as tarphelt , pitch etc.
The existing masonry cracks on the roof top to be opened in V-shape. Cleaning the
surface with wire brush and water pressure. There after drilling the nossal on the
roof and providing and applying primer of mixed blended polymer in one coat for
bonding the old and new concrete and coatings. Injecting the acrylic based polymer
slurry with cement and other expandable admixture i.e quick setting admixture,
mixed blended polymer and microsilica of approved superior quality to plug the
Honeycombs in R.C.C. as well as bonding joint of the 2nd concrete layer. Providing
and applying flexible mixed blended polymer of approved superior quality
cementitious coating with thickness of 1mm in 2 coats i.e 1 coat in horizontal and
2nd coat in vertical way by painting brush ( using quartz sand / Micro silica and
cement in proper ratio) including testing by pounding with water for water tightness
for 3 days taking the treatment upto full floating level of the vertical surface.
Providing and laying protective screed of 2 mm thick in cement (1:4) along with
flexible mixed blended polymer 2ltrs, plastogrip or dispersible fibermesh (100%
virgin) including super plasticizer of approved superior quality for compaction,
finishing and curing etc. complete over the water proof coatings including sealing of
construction
joints
by flexible
compound along with making the base
Building Works Based On CPWD
skeleton
- 2014-2015
- rubberized
Page 183 of 184
with
flexible
mixed
blended
polymer
and
microsilica
and fibres.
16/05/2014 - 1-26
585.800
sq.m
83328 1-26-4
16/07/15 12:42
Rate Card
Effective Date
16/05/2014
Rate In (Rs.)
Item Description
Rate
Unit
construction joints by flexible rubberized compound along with making the base
with flexible mixed blended polymer and microsilica and fibres.
83329 1-26-5
Providing and applying 1.2mm thick EPDM (Ethyle Pethyle Desmodor Monomor)
water proofing membrane along with surface preparation by mechanical grinder
over construction joint/ expansion joint along with applying Ist coat of primer
followed by one coat of adhesive for EPDM on the surface and rubber membrane
including supply of all material labour T&P etc, also including treatment to
expansion/construction joints.
3,558.900
83330 1-26-6
Water proofing treatment of CGI sheet with mixed blended polymer fibre mat and
hardener in two coats including cost of all material labour T&P etc.
197.000
rm
83331 1-26-7
Cleaning the existing bolts and removing all old treatment, providing and applying
flexible rubberized compound for sealing each bolt at the rate of 15 gms per bolt.
34.800
each
83332 1-26-8
247.200
rm
83333 1-26-9
Water proofing treatment by highly flexible mixed blended polymer in three layers
mixed with neat cement 1:3 (1 blended polymer: 3 cement) followed by 12 mm
thick plaster in 1:4 for walls. Mixed blended polymer is used in place of bio
degradable epoxy.
532.900
sq.m
83334 1-26-10
Water proofing treatment by highly flexible mixed blended polymer in three layers
mixed with neat cement 1:3 (1 blended polymer: 3 cement). Mixed blended polymer
is used in place of bio degradable epoxy.
370.900
sq.m
sq.m
Specification:
16/07/15 12:42